Database Info

[ROM][10] DarkJoker360 AOSP 10 for Huawei P8 Lite 2017

Hi,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DarkJoker360 AOSP 10 for Huawei P8 Lite 2017
*** Stable Version ***
About
Code:
[CENTER]Android is an open source software stack for mobile devices and a corresponding open source project led by Google. This site and the Android Open Source Project (AOSP) repository offer the information and source code needed to create custom variants of the Android stack, port devices and accessories to the Android platform, and ensure devices meet the compatibility requirements that keep the Android ecosystem a healthy and stable environment for millions of users.
[/CENTER]
Working
Code:
[CENTER]* Touchscreen
* Adb / Mtp
* Audio
* Boot
* Bluethoot
* Internal/External storage
* Sensors
* Wifi
* RIL
* Camera
* Android 10 gestures
* NFC
* FP gestures
* VoLTE
[/CENTER]
Not Working
Code:
[CENTER]You tell me
[/CENTER]
NOTE: The signal icon is buggy due to Huawei weird ril implementation, I am still looking to fix it over the new Android 10 telephony changes.
Installation
Code:
[CENTER]* you must have TWRP installed (The pretoriano80 one is more compatible with Q, so I recommend it.)
* go to TWRP and do a full wipe (system, data, cache, dalvik/art cache) !
* format data
* reboot to bootloader
* extract AOSP 10 zip
* run: fastboot flash system <drag system.img here>
* reboot to TWRP
* flash gapps (optional)
* flash NFC.zip
NOTE: this zip is needed for having working NFC. DO NOT IGNORE IT !
* flash root(optional)
NOTE: Flash only the Magisk zip linked in this post !
* reboot to System
* Enjoy !!![/CENTER]
Update
Code:
[CENTER]* extract the new update of AOSP
* reboot device to recovery
* wipe cache, dalvik cache
* reboot to bootloader
* run: fastboot flash system <drag system.img here>
* reboot to TWRP
* install gapps(optional)
* install NFC.zip
* NOTE: this zip is needed for having a working NFC. DO NOT IGNORE IT !
* NOTE: If you can' t see Nfc in Settings anymore re-do the steps and wipe System too.
* reboot to System
* Enjoy !!![/CENTER]
If you are getting Error 70 while flashing gapps just resize system from TWRP !
If gapps are giving network errors or other kind of errors install them after first boot !
Download
Code:
[CENTER][URL="https://sourceforge.net/projects/darkjoker360-developements/files/Huawei/P8%20Lite%202017/Android-10/"]DarkJoker360 AOSP 10 and NFC fix[/URL]
[URL="https://opengapps.org/"]Gapps[/URL]
[URL="https://github.com/Magisk-Phh/Releases"]Magisk Phh[/URL]
[URL="https://sourceforge.net/projects/darkjoker360-developements/files/Huawei/Generic/magisk-phh-v19.3-for%2Bv218.zip/download"]Older Magisk Phh v19.3[/URL][/CENTER]
Credits:
@phhusson
@Flex1911
@haky 86
@DIl3mm4
@Hami_Do
Please support my work, it's very important! Thanks
DONATIONS
Regards !​
XDA:DevDB Information
Android Open Source Project, ROM for the Huawei P8lite/P8 Lite
Contributors
DarkJoker360
Source Code: http://github.com/DarkJoker360
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 8.x,bootloader unlocked and TWRP
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 10
Stable Release Date: 2019-11-24
Created 2019-11-24
Last Updated 2020-10-09

FAQ.
Q. I can't flash gapps, why?
A. While installing gapps you can maybe face error 70,the insufficient space error. Just resize system via TWRP !
Q. My device can't pass splash screen, why?
A. Try to install magisk, it resolve this.
Q. My device can't pass bootanimation, why?
A. Android 10 requires data to be decrypted, this is the most cause of bootloops, look how to decrypt it in this thread , credits to its OP.
Q. How can I get VoLTE working?
A. The VoLTE fix is just a magisk module, flash it via twrp or from magisk manager.
HWIms-Hi6250-1.0.zip
Thanks to all the guys from Hi6250 Community who worked on updating it to Q !
Q. I can't receive SMS notifications and alarms aren't working, why?
A. The problem is not with our device but with messy AOSP apps (Messages and DeskClock), fix it by using Google Messages and Google Clock.
* I really recommend you to use Magisk-phh v19.3 instead of newer versions for better cpu usage and battery life.

Sad is not for the original p8 lite

Glad to see Android 10 rom for this device

SilverGamer_YT said:
Sad is not for the original p8 lite
Click to expand...
Click to collapse
my ale-l21 is bricked and some hardware parts is damaged.

Hi
Glad to see Android 10 for P8 Lite 2017
Thank you for your efforts on this device.
I have a question
Where can i find gapps for Android 10?
I couldn't find it on open gapps.
And i have a little problem with pure aosp.
The Google search bar looks very old version.
Can we fix it somehow?

Traceur017 said:
Hi
Glad to see Android 10 for P8 Lite 2017
Thank you for your efforts on this device.
I have a question
Where can i find gapps for Android 10?
I couldn't find it on open gapps.
And i have a little problem with pure aosp.
The Google search bar looks very old version.
Can we fix it somehow?
Click to expand...
Click to collapse
The searchbar will be updated once you install gapps.
For gapps well try bitgapps or other packages, i am making a custom one.
Btw I did the "ugly" AOSP 10 because the current sources aren't for other custom roms building yet.
If i am not able to fix this problem I will customize it.

Nice works, it's cool see active developers on this phone. I can't try it for the moment because i'm trying Havoc 3.0 from ExpressLuke but i will try it when i get the time to wipe my phone ^^

cethiel said:
Nice works, it's cool see active developers on this phone. I can't try it for the moment because i'm trying Havoc 3.0 from ExpressLuke but i will try it when i get the time to wipe my phone ^^
Click to expand...
Click to collapse
Is it a gsi and does it work good?

Traceur017 said:
Is it a gsi and does it work good?
Click to expand...
Click to collapse
Yes for the moment it's work good with patch from @Hami_Do, rom have same non working part as this rom.

Offline navigation with maps or here we go working?
Thanks

I have a question, works on all hi6250 versions or only P8 lite 2017?, i have a honor 6x with emui 8, have a good day bro.

Hi man, i've flashed your rom on my p8 lite 2017. There are some problems: the gestures settings aren't working (they crash the whole settings panel) .
Camera is also not working, but maybe it's my problem. You can find an attachment of the gestures setting.

Hello. i have a mate 10 lite. works perfectly for me. thank you.

Thank you very much for Android 10! This is awesome.

Hi! Thank you so much for this rom! I flashed it and is almost perfect. The only problem I find is that the hotspot wifi can't turn on but the tethering is working perfectly. Somebody has a fix for the Hotspot?
---------- Post added at 08:12 PM ---------- Previous post was at 07:59 PM ----------
zem0z said:
Hi man, i've flashed your rom on my p8 lite 2017. There are some problems: the gestures settings aren't working (they crash the whole settings panel) .
Camera is also not working, but maybe it's my problem. You can find an attachment of the gestures setting.
Click to expand...
Click to collapse
I had the same problems, to fix them you must do:
1) go in twrp -> Wipe -> Swipe to factory reset
2) After that you must flash Gapps and the patch: go in Install -> select the Gapps linked by DarkJoker360 -> install them
3) do the same thing with the patch for Android 10
4) reboot your phone
NOTE: if you get some errors during the setup about updates just ignore them.
Hope this will help!

Is there any chance for working NFC?

CodeSnipper said:
Is there any chance for working NFC?
Click to expand...
Click to collapse
https://forum.xda-developers.com/p1...al-fixes-hi6250-devices-t3936745/post81021365

Does it work on honor 6x?

Can anyone maybe help me? How to boot into fastboot? I tried using adb and fastboot but it say device not found.

[CLOSED][VENDOR][11.0][Crystal] Community Vendor [2020/11/14]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Community Vendor For Nokia 7.1
Disclaimer
i am not responsible for any bricks
About Community Vendor
A vendor which is optimised and bug free to use on any generic system images .
Works on
1.custom roms
2.stock roms
3.erfan ports
4.phhusson builds
Installation procedure
1. Download Community_Vendor.zip
2. Select wipe -> advance wipe -> wipe only vendor
3. Flash Community_Vendor.zip
4. Reboot system
Thanks to my Contributor David Lee For bluetooth audio fix ​
​
Download Vendor
Android OS version: 10.0.0
Security patch level: December 2019
Author: Raghu varma
​

reserved

Raghu varma said:
bug free
Click to expand...
Click to collapse
Could you please confirm the OpenSL ES audio is working fine and there is no crackling sound when it's used?

changelog - 17-02-2020
* Removed force encryption
* Added GCAM support
* Compressed vendor
* Image file reduced to 512MB
* Works on stock roms , GSI & any custom roms

Raghu varma said:
changelog - 17-02-2020
* Removed force encryption
* Added GCAM support
* Compressed vendor
* Image file reduced to 512MB
* Works on stock roms , GSI & any custom roms
Click to expand...
Click to collapse
works well after wipe data
Update : Gcam still not working
Update 2 : Gcam works after reboot but sometimes stop working that with reboot works again

Changelog Sat Feb 22 12:11:37 UTC 2020
===================================
1. Fixed Crack sounds during playing Games
2. Fixed Crack sounds in Whatsapp calls
3. No more Crack sounds in 3rd party apps
4. Few audio configs imported from 9.0 vendor
5. bluetooth audio ( i didn't tested )
6. Mic working in direct calls with headphones & without headphones as well
7. imported Few Pie chromatix files to fix Gcam
8. Few libs from 4.050 ( Internal build )
9. works only on custom roms.
Note1 - Dont use this build on stock roms.
Note2 - Now added flashable zip support so no need to unzip and flash vendor.img
Installation process
===============
1. Download zip
2. boot in to twrp
3. Flash zip
4. Reboot system

Changelog Sun Feb 23 10:59:18 UTC 2020
===============================
1. Added stock rom support
2. Added GSI support
3. Added custom rom support
4. Feel free to flash on Any Android 10 Rom
5. Finally No more crack sound during games & 3rd party apps
6. vendor image size reduced from 1GB to 512MB for all 4 phones
Note - well if you are planning to flash this vendor on your stock rom or GSI? factory reset must and should.
Reason - I disabled force encryption in this vendor so the users who are planning to flash this vendor on stock roms or GSI factory reset recommended
2. No need to do factory reset on my custom rom builds because by default I shipped all of my custom rom builds with disabled force encryption.

Raghu varma said:
Changelog Sun Feb 23 10:59:18 UTC 2020
===============================
1. Added stock rom support
2. Added GSI support
3. Added custom rom support
4. Feel free to flash on Any Android 10 Rom
5. Finally No more crack sound during games & 3rd party apps
6. vendor image size reduced from 1GB to 512MB for all 4 phones
Note - well if you are planning to flash this vendor on your stock rom or GSI? factory reset must and should.
Reason - I disabled force encryption in this vendor so the users who are planning to flash this vendor on stock roms or GSI factory reset recommended
2. No need to do factory reset on my custom rom builds because by default I shipped all of my custom rom builds with disabled force encryption.
Click to expand...
Click to collapse
I use previous custom vendor on stock rom with disabled force encryption , so no need factory reset , yes ?

Please fix bt music

On my phone with this vendor bt audio dont work + gcam still can't take photos, but I think this problem caused gcam libs conflict ( I don't developer and I can be wrong)

Changelog Fri Apr 3 08:41:31 UTC 2020
===================================
1. Fixed bluetooth audio
2. Flash only on my custom rom builds & generic system images (GSI)
3. vendor.img compressed to 512MB
Installation process
===============
1. Download zip
2. boot in to twrp
3. Flash zip
4. Reboot system

Raghu varma said:
Changelog Fri Apr 3 08:41:31 UTC 2020
===================================
1. Fixed bluetooth audio
2. Flash only on my custom rom builds & generic system images (GSI)
3. vendor.img compressed to 512MB
Installation process
===============
1. Download zip
2. boot in to twrp
3. Flash zip
4. Reboot system
Click to expand...
Click to collapse
I'm on Nokia 7.1 with March 2020 Stock ROM Security patch? Can I install this? And yes I read #2, also a question, What do you mean by install only on your "generic system images (GSI)"
My bootloader is unlocked with TWRP installed.

[ROM][10.0][OFFICIAL] FlokoROM v3.0 [evert][Moto G6 Plus]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this ROM before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
Features
Floko-specific features:
OmniSwitch included
Switch "Recents" style (now you can choose QuickStep or OmniSwitch as default recents!)
Remove Music Player (install what you like)
Remove "non-free" Font Packages
Disable ADB when gaming mode (optional)
crDroid and LineageOS features:
Network traffic monitor
Switch 4G/LTE icon
Battery bar
Statusbar Quick/Smart pulldown
QS columns
Notification Ticker
Smart Charging
Rounded corners
Style(Theming)
Volume panel customization
Device-specific Features
Moto Gestures
DSDS
Selinux: enforce
Data Encrypt
Known Issues
Calling with a bluetooth headset does not work. (Normal calls is work fine.)
ctsProfile: fail
If you encountered other issues, please tell me
How to Install
Boot the newest TWRP .img
MAKE A BACKUP OF ALL YOUR DATA, FES, PERSIST.
Flash copy-partitions-AB.zip (This will prevent device from getting bricked if you are coming from stock rom for the first time. It takes a backup of active slot to inactive slot).
In TWRP, click "Wipe", "Format Data", then type "yes" as prompted.
ADB sideload the newest build.
Boot into "Recovery", this will boot you to either Lineage Recovery or TWRP depending on your choice to install TWRP or not. It is necessary to reboot between ROM flash and GApps/Addon flash due to verity/slot-swap logic.
Flash GApps and Magisk(optional)...
Reboot to System.
Enjoy.
Thanks
love. respect. and love.
crDroid
LineageOS
OmniROM
Jleeblanch
erfanoabdi
moto-SDM660 contributor people
1indwurm
Team
@1indwurm
@tumayouzi(device maintainer)
Downloads
From MEGA:https://mega.nz/#F!sNtwWSTK!LAQDiW4G9Yz0scjLCrN4_A
From Google Drive:https://drive.google.com/drive/folders/1k7UstQChpqp6KtFFzToYPK41sS_gQ4VD?usp=sharing
Reporting Bugs
DO NOT report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /sys/fs/pstore/console-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Source Codes
FlokoROM: github.com/FlokoROM
device: FlokoROM-Motorola/android_device_motorola_evert
device(sdm660-common): FlokoROM-Motorola/android_device_motorola_sdm660-common
kernel: FlokoROM-Motorola/android_kernel_motorola_sdm660
XDA:DevDB Information
FlokoROM, ROM for the Moto G6 Plus
Contributors
tumayouzi, 1indwurm
Source Code: https://github.com/FlokoROM
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: LineageOS, crDroid
Version Information
Status: Beta
Created 2020-03-19
Last Updated 2020-05-08

additional information
Changelog
You can read full changelog (Git changes) in FlokoROM. Open Settings -> Floko Settings -> about FlokoROM -> current changelog .
Code:
[SIZE="3"]
Floko-v3.0-evert-20200530_130712-OFFICIAL - kernel update
* Update kernel 4.4.225
* Track to FlokoROM update
Floko-v3.0-evert-20200511_130635-OFFICIAL - May,2020 security patch update
* Update kernel 4.4.223
* May,2020 security patch levels
* Track to FlokoROM update
Floko-v3.0-evert-20200507_190316-OFFICIAL - kernel update
* Update kernel 4.4.222
* Building kernel with clang 11.0.1
* Track to FlokoROM update
Floko-v3.0-evert-20200502_195704-OFFICIAL - kernel update
* update Kernel 4.4.221
* Track to FlokoROM update
Floko-v3.0-evert-20200425_120547-OFFICIAL - kernel update
* update Kernel 4.4.220
* Track to FlokoROM update
Floko-v3.0-evert-20200415_093857-OFFICIAL - 2020-04-05 security patch update
* update Kernel 4.4.219
* 2020-04-05 security patch levels
* Track to FlokoROM update
Floko-v3.0-evert-20200404_102658-OFFICIAL - kernel update
* update Kernel 4.4.218
* Force enable mobile network settings v2
* Update qti-telephony-common
* Track to FlokoROM update
Floko-v3.0-evert-20200330_135617-OFFICIAL - hotspot and kernel building clang target fix
* WiFi tethering (hotspot) fix (Problems with CAF. It's not a FlokoROM/device problem.)
* Building kernel with clang 10.0.5 build 6305083
Floko-v3.0-evert-20200326_230440-OFFICIAL - Official release!
* Migration to official build
* Track to FlokoROM update
Floko-v3.0-evert-20200323_224926-UNOFFICIAL - Kernel update
* Track to linux kernel 4.4.217
* Fix up build of qcacld-3.0
* Track to FlokoROM update
Floko-v3.0-evert-20200318_143821-UNOFFICIAL - First release.
* Enforcing SELinux.
* Building kernel with clang 10.0.5
[/SIZE]

Reserved

The official build guidelines for FlokoROM have been released.
reference : https://github.com/FlokoROM/manifesto/wiki/How-to-official
and I was given permission to make it officiality build by him.
Therefore, i will update the ROM at least once a month.
The "MAX RESPECT" to @1indwurm

Hey! Thank you for the efforts you have put into the rom. I need a quick help, rather a solution. My VOLTE (carrier JIO India) after flashing any ROM won't work. I can use the data, but can't seem to make a call. HELP!

Great rom! Love the tweaking possibilities, seems stable and ready to use as a daily driver, no problems yet. :good:

sani23 said:
Hey! Thank you for the efforts you have put into the rom. I need a quick help, rather a solution. My VOLTE (carrier JIO India) after flashing any ROM won't work. I can use the data, but can't seem to make a call. HELP!
Click to expand...
Click to collapse
Does the IMEI recognize?
If the IMEI is 0, try the URL thread.
https://forum.xda-developers.com/g6-plus/how-to/guide-how-to-solve-wifi-mobile-data-t3994827
If Baseband is working properly, the end of baseband should end with an "R".
example: M660_29.59.01.96R
I don't have a VoLTE line, so sorry I can't debug it.

Microphone is working?

Jonathas S said:
Microphone is working?
Click to expand...
Click to collapse
It works. but calls with a bluetooth headset do not work.

hi, where can i find the copy-partitions-ab.zip file and which gapps do you recomend?

Clopy said:
hi, where can i find the copy-partitions-ab.zip file and which gapps do you recomend?
Click to expand...
Click to collapse
copy-partitions-ab.zip is here.
https://forum.xda-developers.com/showpost.php?p=78532436&postcount=2
I recommend gapps is opengapps.

tumayouzi said:
Does the IMEI recognize?
If the IMEI is 0, try the URL thread.
https://forum.xda-developers.com/g6-plus/how-to/guide-how-to-solve-wifi-mobile-data-t3994827
If Baseband is working properly, the end of baseband should end with an "R".
example: M660_29.59.01.96R
I don't have a VoLTE line, so sorry I can't debug it.
Click to expand...
Click to collapse
A noob question! Since you don't have VoLTE line it may never be incuded in the ROM. Correct? That being the case, is it possible for you to take the module from other moto devices or say if i could send you my phone's image, could you add the module to rom?

sani23 said:
A noob question! Since you don't have VoLTE line it may never be incuded in the ROM. Correct? That being the case, is it possible for you to take the module from other moto devices or say if i could send you my phone's image, could you add the module to rom?
Click to expand...
Click to collapse
Since I have no way to verify it, I'll add it if you tell me in step by step how to apply the code and modules that worked correctly.

tumayouzi said:
Since I have no way to verify it, I'll add it if you tell me in step by step how to apply the code and modules that worked correctly.
Click to expand...
Click to collapse
Okay. I don't know the codes for VOLTE though. But i can test and verify it for you, throughout the module

Yes plese. I need help with the same. No other ROM is supporting VOLTE for ReTIN edition of g6 plus. If possible, can you take stock retin firmware as the base and take the needful codes for VoLTE? If that can be done, it could really be helpful. Thank you.
Edit: i found this android page that has some relevant info, I'm not really a coder, so can't help besides this and testing the rom during development.
source.android.com/devices/tech/config/carrier

arigatou gozaimasu
hello OP. thank you very much for your work, i really apreciate!
i'm planning to flash your build Floko-v3.0-evert-20200609_132637-OFFICIAL
i'm new with this device and have noob questios, hope you can help me:
0.- i'm on stock rom 9.0 ppws29.116-11-23 may's security patch
1.- i see your build have the 4.x kernel, can i use the official twrp 3.3.1.0. or there's another custom recovery compatible with that kernel?
2.- the copy-partitionsAB file.. do i have to flash it everytime i flash or update this rom? i always perform clean-flash (wiping everything + format data)
3.- you write that i need to adb sideload the rom.. but can i copy to my sd card? along with opengapps and magisk... or it's really necessary to "sideload" it?
4.- the only reason i root my devices is for adaway and magiskhide for my banking apps... do magisk is fully working with your rom? i saw in your first post that ctsrofile fail... or this can be solve by flashing the 'safetynet pass' module
5.-my previously device was the redmi note 4... the bugs with the mic recording in some apps was solve by disabling the "ok google" voice recognicion. do your rom has the same issue?
thank you in advance for your comments and i hope you the best.
-dgm

[ROM][13][OFFICIAL] PixelOS [AOSP][STABLE][23/01/2023]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelOS is an AOSP-based ROM, with Google apps included and all Pixel goodies. We aim to provide an experience similar to Google Pixel phones with numerous performance enhancements and a small amount of useful additional features.​
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Our Feature List​
Downloads
Get the latest PixelOS Build for Xiaomi Redmi Note 4/4x Download
Magisk (optional) https://github.com/topjohnwu/Magisk/releases
PixelOS Recovery https://sourceforge.net/projects/pixelos-releases/files/twelve/mido/recovery/
Note: GApps are included, don't flash separately.
Notes
• Selinux is enforcing by default
• 4.9.337 Fussion kernel
Flashing Instructions:
Clean Flash (from non dynamic/miui)
1. Wipe cache,dalvik,system,data and vendor
2. Format data
3. Flash retrofit supported TWRP
4. Wipe dalvik,cache,data and metadata
5. Format data (reboot to recovery after formatting data)
6. Flash ROM (untick the option of unmount system before flashing from TWRP settings)
7. Format data
8. Reboot to system (it may show no os installed ignore it, if it doesn't boot then flash the ROM again and reboot to system)
Clean Flash (from another dynamic ROM)
1. Wipe cache,dalvik,data and metadata
2. Flash ROM
3. Format data
4. Reboot to system
Dirty Flash
1. Wipe cache and dalvik
2. Flash ROM
3. Flash magisk (if want root)
4. Reboot system
Join our Telegram Group https://t.me/PixelOSChat
For staying updated https://t.me/Alonerchannel
For reporting bugs if found https://t.me/alonesplayground
Contributors:
Vasto Lorde and my testers for testing and everyone from whom i cherry-picked
Source Code:
PixelOS https://github.com/PixelOS-AOSP
Device Tree and Vendor Tree https://github.com/PixelOS-Devices
Kernel Tree https://github.com/Alone0316/kernel_mido
ROM OS Version: Android 13
ROM Kernel: Linux 4.9.337
Stable Release Date: 10 May 2023
Latest Release Date: 10 May 2023

Going to try this, optimistic

Sweet. Gonna flash this one.

Is there audio amplification?
Thank you for the effort, much appreciated .

As of now list of bug i get on this firmware.
-WiFi QR Code not working.
-Chrome Browser sometimes stuck. You wont able to scroll up and down. you need to close and open again the apps to make it work.

This rom is great and so is the update, with a cpu power save profile on smart pack kernel manager (device is still smooth and responsive just a small reduction of maxim clocks amd gpu on power level 3, 305 max gpu this is my sot so far HD prime video streaming, full charge at 0:00 am this morning

can I flash this rom with Orange Fox recovery to i have to use PixelOS Recovery?

cooleydoo22 said:
This rom is great and so is the update, with a cpu power save profile on smart pack kernel manager (device is still smooth and responsive just a small reduction of maxim clocks amd gpu on power level 3, 305 max gpu this is my sot so far HD prime video streaming, full charge at 0:00 am this morning
Click to expand...
Click to collapse
which recovery you used to flash this rom?

cooleydoo22 said:
This rom is great and so is the update, with a cpu power save profile on smart pack kernel manager (device is still smooth and responsive just a small reduction of maxim clocks amd gpu on power level 3, 305 max gpu this is my sot so far HD prime video streaming, full charge at 0:00 am this morning
Click to expand...
Click to collapse
Appreciate if you could share battery statistic.
It's well known that kernel 4.x is power hungry, even when idle.
Thank you.

Maybe my question is a little bit off topic, but can please someone tell me: Is it known if Google can or will ban accounts when using a phone which spoofs to be a pixel to get unlimited storage on Google photos?

surajbala said:
can I flash this rom with Orange Fox recovery to i have to use PixelOS Recovery?
Click to expand...
Click to collapse
Yes u can flash it using Orange Fox recovery

tito_puente said:
Maybe my question is a little bit off topic, but can please someone tell me: Is it known if Google can or will ban accounts when using a phone which spoofs to be a pixel to get unlimited storage on Google photos?
Click to expand...
Click to collapse
Surely not. I use a rom that spoofs it on my main phone and nothing ever happened. Like if Google Photos wont detect that (which im sure that google is trying to do so to not get cheated on like that), then how would they? If it would detect somehow, it would just switch back to counting it to your quota. No reason for banning.

The fingerprint scanner Goodix does not work in some applications. In several unofficial firmware based on the Pixel Experience project, this problem has already been solved

Alone0316 said:
View attachment 5559399
PixelOS is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, themed icons, google sans fonts, Monet color-based system-wide theming, boot animation), a fork of OG Pixel Experience with improvements on the top of it. Huge respect to PixelExperience team for their work, thanks to them for making this ROM possible.
In short, a fully functional Pixel Experience with just the right amount of essentials.​
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Improvements over PixelExperience
Performance improvements from ProtonAOSP
Adopted screenshot sounds to ringer mode
3-finger swipe to capture screenshots
Per app network restriction permission
Android 12L style Internet and Screenrecord dialogs
Android 13 inspired Media Output Picker
Introduced App Lock
Double tap to sleep on lockscreen and status bar
Added Screen Recording Customizations
Added Advanced Reboot
Allow disabling Screenshot Sounds
Added Bluetooth headset battery indicator
Spoofed as Pixel XL for Google Photos for unlimited backup in original quality
Added themed icons for a lot of third party icons in stock Pixel launcher
Added monet in power menu
Exposed legacy WiFi and Cellular data QS tiles
Added bluetooth battery level indicator on status bar
Added NFC tile in QS for supported devices
Added double tap/long press power button to toggle torch
Reduced log spam verbosity
A lot of under the hood UI fixes and improvements​
Downloads
Get the latest PixelOS Build for Xiaomi Redmi Note 4/4x Download
Magisk (optional) https://github.com/topjohnwu/Magisk/releases
PixelOS Recovery https://sourceforge.net/projects/pixelos-releases/files/twelve/mido/recovery/
Note: GApps are included, don't flash separately.
Notes
• Selinux is enforcing by default
• 4.9.312 Fussion kernel
Flashing Instructions:
Clean flash (coming from a different ROM):
- Download ROM from the link above
- Download Magisk v23.0 or newer (optionally)
- Reboot to recovery
- Wipe system, vendor, cache, dalvik, data
- Flash ROM zip
- Reboot and voila!To get root access, reboot to recovery after ROM setup and flash magisk.
Updating to a newer build (dirty flash):
- Flash ROM zip and magisk (optional)
- Wipe cache and dalvik (optional, recommended)
- Reboot and voila!
Join our Telegram Group https://t.me/PixelOSChat
For staying updated https://t.me/Alonerchannel
For reporting bugs if found https://t.me/romdiscussion
Contributors:
Vasto Lorde and my testers for testing and everyone from whom i cherry-picked
Source Code:
PixelOS http://github.com/PixelOS-Pixelish
Device Tree and Vendor Tree https://github.com/PixelOS-Devices
Kernel Tree https://github.com/Alone0316/kernel_mido
ROM OS Version: Android 12.1
ROM Kernel: Linux 4.9.312
Stable Release Date: 09 May 2022
Latest Release Date: 09 May 2022
Click to expand...
Click to collapse
Does this rom provide unlimited storage in photos?

vipulkohli said:
Does this rom provide unlimited storage in photos?
Click to expand...
Click to collapse
Yes

Flashed the rom two days ago and much appreciate the work done, the battery, animations, performance all are working at their best.
Bug:
1. VoLTE not working
2.Audio/Video keeps freezing after every 3-5 seconds.
Potential solution - Turn off Hey Google
Settings>>Google>>Settings for Google apps>>Search, assistant and voice>> Voice>> Voice match>> Turn off "Hey Google".
Worked for me, hoping to get this bug solved in next update!
Keep doing great work!!

Deepsaa said:
Flashed the rom two days ago and much appreciate the work done, the battery, animations, performance all are working at their best.
Bug:
1. VoLTE not working
2.Audio/Video keeps freezing after every 3-5 seconds.
Potential solution - Turn off Hey Google
Settings>>Google>>Settings for Google apps>>Search, assistant and voice>> Voice>> Voice match>> Turn off "Hey Google".
Worked for me, hoping to get this bug solved in next update!
Keep doing great work!!
Click to expand...
Click to collapse
1. Volte is working fine for me, which sim u have?
2. Did u change the kernel as i nor any other dev reported such issue to me, but let me cross check it according to the potential solution you gave

Alone0316 said:
1. Volte is working fine for me, which sim u have?
2. Did u change the kernel as i nor any other dev reported such issue to me, but let me cross check it according to the potential solution you gave
Click to expand...
Click to collapse
1. I have a Vi sim which had VoLTE in previous pixelexperience rom but not sure maybe there is a fault in the sim, will update you with another sim.
2. No idea about the kernel I just flashed it as per the instructions and formatted the phone after that. I shared here just in case any community member facing the same problem and didn't find any solution.

Deepsaa said:
1. I have a Vi sim which had VoLTE in previous pixelexperience rom but not sure maybe there is a fault in the sim, will update you with another sim.
2. No idea about the kernel I just flashed it as per the instructions and formatted the phone after that. I shared here just in case any community member facing the same problem and didn't find any solution.
Click to expand...
Click to collapse
1. Sure check and tell, i have Airtel sim and it's working fine for me.
2. Regarding the lag i will confirm with other users and tell you

Which Google Camera version will work on this rom perfectly?

[ROM][13][OFFICIAL] PixelOS [AOSP][STABLE][RMX2020]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelOS is an AOSP based ROM, with Google apps included and all Pixel goodies. We aim to provide an experience similar to Google Pixel phones with numerous performance enhancements and a small amount of useful additional features.
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Our Featurelist​
Device Specific Issues:
None
Requirements
Realme UI 1.0 A77 FW
Downloads
Get the latest PixelOS Build for RMX2020- Download
Magisk (optional) https://github.com/topjohnwu/Magisk/releases
Recovery https://pitchblackrecovery.com/rmx2020/
PixelOS Recovery https://sourceforge.net/projects/pixelos-releases/files/twelve/RMX2020/recovery/
Note: GApps are included, don't flash separately.​
Notes
• Encryption is enabled by default
• SELinux is enforcing
Flashing Instructions
Clean flash (coming from a different ROM):
• Download ROM from the link above
• Download Magisk v23.0 or newer (optionally)
• Reboot to recovery
• Format data
• Flash ROM zip
• Reboot and voila!
• To get root access, reboot to recovery after ROM setup and flash magisk.
Updating to a newer build (dirty flash):
• Flash ROM zip and magisk (optional)
• Wipe cache and dalvik (optional, recommended)
• Reboot and voila!
Read our blog https://blog.pixelos.net
Join our Telegram Group https://t.me/PixelOSChat
Buy me a Coffee https://paypal.me/*
Help translate PixelOS https://translate.pixelos.net
Source Code
PixelOS: http://github.com/PixelOS-AOSP
Device Tree and Vendor Tree: https://github.com/PixelOS-Devices
Kernel Tree: https://github.com/ArrowOS-Devices/android_kernel_realme_RMX2020
ROM OS Version: Android 13.
ROM Kernel: Linux 4.14.x

Reserved

Do I have to relock the bootloader, flash back to stock and upgrade the firmware to A.77 though? I am using ArrowOS 12.1 on my C3 atm.

blakegriplingph said:
Do I have to relock the bootloader, flash back to stock and upgrade the firmware to A.77 though? I am using ArrowOS 12.1 on my C3 atm.
Click to expand...
Click to collapse
Nah...just flash like other roms

sarthakroy2002 said:
Nah...just flash like other roms
Click to expand...
Click to collapse
Yeah but the stock ROM I had before flashing ArrowOS was an earlier build.

blakegriplingph said:
Yeah but the stock ROM I had before flashing ArrowOS was an earlier build.
Click to expand...
Click to collapse
oh.. well it should be fine af..no issues

Can it work on C35?

MumboTheDumbo said:
Can it work on C35?
Click to expand...
Click to collapse
no

hi, I wanted to apologize in advance that maybe a little off-topic. I wanted to install PixelOS, but I was stuck on unlocking the boot loader. My phone is realme C3 RMX2020 ver. A.77. And I can't install any "DeepTesting". Could someone recommend a current tutorial uploading TWRP, which works on A.77?

I had to rest a bit to understand how to install "DeepTesting". After unlocking the bootloader, it was easy to I did not think that Android 13 would be so propely on this phone For half a year I was struggling with the no longer supported Android 10 and I wanted to smash this phone against the wall, but instalation this rom extended his life
I wanted to ask something else, on the website pixelos.net I read
Updating to a newer build (dirty flash):​
Update via OTA Updater, or
Wipe dalvik and cache (optional)
Flash ROM zip (sideload)
Reboot and voila!
Does this mean that this rom will get updates via OTA? Will I have to manually update it through recovery?
P.S.
At the moment I have noticed two bugs
- The second SIM card does not work
- When disconnected from bluetooth headphones, no sound appears on the phone (The problem with the lack of sound occurs when I turn off the headphones. When I hang up on phone, is all ok)

max95100 said:
I had to rest a bit to understand how to install "DeepTesting". After unlocking the bootloader, it was easy to I did not think that Android 13 would be so propely on this phone For half a year I was struggling with the no longer supported Android 10 and I wanted to smash this phone against the wall, but instalation this rom extended his life
I wanted to ask something else, on the website pixelos.net I read
Updating to a newer build (dirty flash):​
Update via OTA Updater, or
Wipe dalvik and cache (optional)
Flash ROM zip (sideload)
Reboot and voila!
Does this mean that this rom will get updates via OTA? Will I have to manually update it through recovery?
P.S.
At the moment I have noticed two bugs
- The second SIM card does not work
- When disconnected from bluetooth headphones, no sound appears on the phone
Click to expand...
Click to collapse
everything is fine af here... also ye.. u will get ota updates on the rom.. just use pixelos recovery

sarthakroy2002 said:
everything is fine af here... also ye.. u will get ota updates on the rom.. just use pixelos recovery
Click to expand...
Click to collapse
Thanks Good job
Fact, both SIM slots work, unfortunately if i have to configure it to work SIM this ROM does not detect it
I use an additional SIM card for the Internet, which needs to be configured. Phones in which you can manually turn on and off the SIM card in the settings recognize this card to me, on this ROM unfortunately not.
As for the fading of the sound after disconnecting from bluetooth headphones, the problem arises if the disconnection occurs from the headphone (Turning off the headphones / no power on the headphones). If I disconnect with the headphones on my phone, it's all ok
but thank you anyway for resurrecting and developing this two-year-old phone

GPS is not working (please fix it in next builds)

After installing this rom my phone suddenly turns of and then reboots to recovery mode automatically. If I try to reboot my phone from the custom recovery it again reboots into custom recovery. What is the problem?

Sajibul032 said:
After installing this rom my phone suddenly turns of and then reboots to recovery mode automatically. If I try to reboot my phone from the custom recovery it again reboots into custom recovery. What is the problem?
Click to expand...
Click to collapse
Bro, Reset ur phone and flash ROM again and then reboot it

pateldevansh008 said:
Bro, Reset ur phone and flash ROM again and then reboot it
Click to expand...
Click to collapse
Already did that. But it's still not fixed.

Things that don't work
- Dual sim not supported
- Only one Google Account can be added.

I don't know if this is a bug either. I can't set another wallpaper with the highest sharpness. It looks like a loss of image quality.

sarthakroy2002 said:
PixelOS is an AOSP based ROM, with Google apps included and all Pixel goodies. We aim to provide an experience similar to Google Pixel phones with numerous performance enhancements and a small amount of useful additional features.
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Our Featurelist​
Device Specific Issues:
None
Requirements
Realme UI 1.0 A77 FW
Downloads
Get the latest PixelOS Build for RMX2020- Download
Magisk (optional) https://github.com/topjohnwu/Magisk/releases
Recovery https://pitchblackrecovery.com/rmx2020/
PixelOS Recovery https://sourceforge.net/projects/pixelos-releases/files/twelve/RMX2020/recovery/
Note: GApps are included, don't flash separately.​
Notes
• Encryption is enabled by default
• SELinux is enforcing
Flashing Instructions
Clean flash (coming from a different ROM):
• Download ROM from the link above
• Download Magisk v23.0 or newer (optionally)
• Reboot to recovery
• Format data
• Flash ROM zip
• Reboot and voila!
• To get root access, reboot to recovery after ROM setup and flash magisk.
Updating to a newer build (dirty flash):
• Flash ROM zip and magisk (optional)
• Wipe cache and dalvik (optional, recommended)
• Reboot and voila!
Read our blog https://blog.pixelos.net
Join our Telegram Group https://t.me/PixelOSChat
Buy me a Coffee https://paypal.me/*
Help translate PixelOS https://translate.pixelos.net
Source Code
PixelOS http://github.com/PixelOS-AOSP
Device Tree and Vendor Tree https://github.com/PixelOS-Devices
Kernel Tree https://github.com/PixelOS-Devices/kernel_realme_RMX2020
ROM OS Version: Android 13.
ROM Kernel: Linux 4.14.x
Stable Release Date: 16 Nov 2022
Latest Release Date: 16 Nov 2022
Click to expand...
Click to collapse
The clock app and gboard app ain't working

17-Apr-2023
- Update Audio HIDL to 7.1
- Added 4G Carrier Aggregation (4G+) Support
- Upstream Kernel to 4.14.311
- Load fpsgo kmodule at boot
- store TaskSnapshot in 16 bit pixel format to save memory
- Force HWC copy for virtual displays
- Enable MAC randomization
- Update few MTK IMS blobs from RMX2020 A11 and Provide a proper shim for libsink
- Refactor and Fixup RealmeParts
- Fixed WPA3 related bootloop