Hi all
I’m a complete noob at this and it seems like I have got myself into a bit of a pickle. Sorry for the massive description but I thought it would make it easier to get a good answer.
My Phone:
Samsung Galaxy S4 GT 19505 LTE
PDA I9505XXUEMK8
CSC I9505BTUEMK5
MODEM I9505XXUEMK8
I successfully rooted my phone using Odin. In Odin I added the "CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5" file to the PDA field then rebooted the device. Then I added the "openrecovery-twrp-2.6.3.1-jfltexx" file to the PDA field, rebooted the device and the phone automatically opened in TWRP recovery. In recovery mode I wiped the cache, system and dalvik cache. I then went to install, browsed to the "I9505 Official_Google_Edition_4.3_by_Jamal2367_Finaly_v2.0" file on my SD card, rebooted the device and the Google logo came up on the screen for a few minutes and all was good. Got my new ROM, ran a root checker and all was good.
After some research I decided I wanted to use the Pacman ROM as it seemed to a lot more customisable. Using the same method I went to TWRP recovery wiped the cache, system, and dalvik cache. I then went to Install, browsed for the pacman ROM and the Gapps file on my SD card and everything installed ok, the phone restarted and the pacman logo came up everything was fine. Although I did notice on start up that I got this message.(and have had this error message ever since)
kernel is not seandriod enforcing
set warranty bit : kernel
After using the Pacman ROM for a day I noticed a lot of bugs like my apps would disappear, I couldn't use my banking apps and my phone was generally performing very badly. So I decided to remove the ROM and use CyanogenMod ROM under the recommendation of a friend. So again I pressed home+power+vol up to enter recovery mode but this time it didn’t enter the TWRP recovery it entered the stock recovery mode. This was slightly concerning but I proceeded to use the list menu and cleared the cache etc, browsed the SD card and went to the CyanogenMod 10.2 ROM I previously downloaded. It began to install but in red I got the error message stating that I didn’t have the right permission or signature. The phone rebooted back to the Pacman ROM. I tried the above three times and it still continued to boot back into Pacman ROM sometimes I struggled to even get back into recovery mode.
Soooooo I decided to try and go back to the Google Edition 4.3 ROM and play it safe, using the method from my first paragraph. But when it installed through TWRP I got an error message saying cant find MD5 file. The device rebooted and the Google edition logo came up on the screen but it seems to be locked in a loop. The Google logo wont go away and the phone vibrates once then three times quickly every 10 seconds.
I can still enter both TWRP recover and Download Mode. But I don’t want to mess around with it anymore without getting some advice. Any help would be much appreciated as I really need my phone working.
Thanks again
Aiden
Did you create a backup while on your first run with google edition? If so wipe cache, system, and dalvik and restore to your backup. Should put you back to where you began.
Sent from my LGMS769 using XDA Premium 4 mobile app
I know I should, but I didnt. Is it still fixable ?
*Update*
Couldnt help myself had to have a tinker around. Managed to get Cyanogenmod 10 working with Gapps. Gonna see how I get on with this. Although still would like to know I have been having all these problems.
Sometimes things just dont go as planned: p I have easily soft bricked my phone around 10 times and always able to fix it. You really should have made a stock backup before flashing anything. I recommend doing it now so you at least have a known working configuation backed up for future use. Trust me backups are your friends!
Sent from my LGMS769 using XDA Premium 4 mobile app
Thanks for your replies.
Ye gonna that right now Cyan Mod so far is running very smooth without any problems.
Regards
Aiden
Well, I've had my unit rooted since about a week after I bought it, 2 1/2 years ago. Everything fine - even after using SlimLP 5.02 February Alpha version. Up until yesterday. Something happened, very slow, and wouldn't get into any Google app/site. Kept saying "Google Play" not installed when it was.
Anyway, tried to reflash to Omni 4.4.4 - had MAJOR issues seeing the screen (auto dimming enabled - and simply too dark). Finally worked through the startup/config stuff, and decided since it had an issue - go back to stock a few days and make sure hardware was ok.
So, fired up Odin, flash the old stock firmware I had from Sammobile a while back - now it's stuck at the flashing "SAMSUNG" label. I'm charging fully (was around 50% when I flashed), and will try to reflash again with latest Sammobile firmware (slightly newer that the one I've got).
Now - to the question - anyone know of CWM 6.0.1.1 (I believe) or SlimLP Lollipop would have re-partitioned the device? IF it did, anyone got a PIT file to get the partitions lined back out for the GT-P3113 (Galaxy Tab 2 7)?
No need to repartition. Just enter recovery mode and factory reset it.
Sent from my LGUS990
Ok - it's finally working - I hope. I honestly have no idea what shook it loose.
Process - updated a stock Samsung image for that unit half a dozen times using Odin 3.10. Would always reboot, play the "Samsung Chime", and get to the colored "SAMSUNG" logo and hang. Hooked up to Kies to see if I could do an Emergency Firmware Reload - no dice. Kies would know that something was hooked up, but it wouldn't ever get to saying model, etc. Tried Kies3 - it immediately said it wasn't the correct version - so it knew enough to know Kies3 wouldn't work.
Anyway, loaded a slightly newer version of the stock firmware, using Odin 3.10.0, AND got a stock PIT file for my 8GB unit and applied that - same results. Went into the now Stock Recovery mode (vol+ & power), wiped cache, data, reset - 4 times. Every time, it would reboot and hang. Finally went in, and instead of wiping anything, just rebooted (hit the power button) - this time it took off "updating xx of xx apps". Booted up, went into "I'm a new system - configure me". Afterwards, downloading updates for apps. Seems to be functioning.
So - I don't know what was hanging it up, I don't know if the eMMC is going bad (I haven't loaded it that much, unless the SlimLP Lollipop did something to cause issues). I wouldn't mind the stock firmware so much, except for the 8 tons of crap they load onto it, and you can't get rid of.
There was a "decrappify" that could be applied - but wasn't terribly successful 2 years ago (early 2013). Does anyone know of one that works for the GT-P3113? I'm going to stay stock for a couple of weeks, and watch it to see if it starts acting up again.
Hi All.
So I'm not new to rooting / ROMs (nor am I an expert, as you'll see), but somehow have totally screwed up my tab. I've now honestly done so many things to try to recover, that I couldn't begin to summarize how I got into this mess, but I'll try.
Model is GT-P5113. Most recent working ROM was SlimLP 5.1
I went to flash CM12.1 (using CWM) and God only knows what happened. After it flashed, I tried to reboot and it would only go to CWM recovery. If I chose to reboot device, it would only shutdown, not reboot (This was actually one of the issues I was having with SlimLP as well, so I don't think the flashing had anything to do with that???)
After many attempts at reinstalling CM and SlimLP (I used the same Zip that had worked previously with SlimLP, and the flashing would say installed) it would still only boot to recovery. I finally said, screw it, I'll just start completely over
So attempted to go back to stock 4.2.2 using Odin3.09. Got the stock ROM off SamMobile site. ODIN seemed to flash,but again when it would go to reboot, it would just power down and a charging battery would show up. So I would unplug from the computer, push power button. When it powered up, it would say Installing system update, then after the status bar moved a bit, it would say Error and shut down. When I restart, it very briefly says installing system update, then show the dead android with a red triangle and No Command, and it would boot to the stock android system recovery (I assume CWM was taken off in the process). In yellow, under the stock recovery it says
# MANUAL MODE #
-- Appling Multi-CSC...
Applied the CSC-code : XAR
Successfully applied multi-CSC.
I've tried installing the other ROMs again, this time with TWRP, but only for it to boot to recovery after the Samsung Tab 10. 1 logo.
I have no clue where to go from here. No clue if I'm still rooted (doubt it). At this point I don't care. I just want a functioning tab. I've spent hours searching, but nothing works. I'm open to any / all ideas.
Thanks
Aw, show me a little love, bros. Someone' gotta know something. I'm not above begging / pleading.
I can give more info, less info, post somewere else. Just let me know,and help me resuscitate my tab.
thanks again!
Hello all.
I'm new to modifying my android (Galaxy S7 G930A) and could use some help. I have successfully rooted my phone, but have had some issues trying to flash a custom recovery. I was trying to flash TWRP but for some reason it didn't work, and I would always boot into the stock recovery.
Today, I screwed something up while trying to figure out my host of issues (I was also trying to figure out why I kept getting a "dm-verity verification failed" notice when flashing). Using the TWRP Manager app, I tried to install the recovery that way and it kept giving me an error that it was either already installed or encountered an issue of some kind. Knowing it wasn't installed, I looked for a different route. Long story short, I downloaded Flashify and then manually downloaded and flashed the TWRP recovery img and a "no-verity-opt-encrypt" file - which I read would fix the dm-verity error I was receiving.
I believe that's all I did before this recovery boot issue starting occurring.
Now, when attempting to boot into recovery (no matter what way, through an app, manually, etc) the blue text "Recovery Booting..." appears for half a second and then disappears. If I'm holding down the buttons it will flash again and disappear again, over and over. If I don't hold down the buttons, when it disappears the phone boots up as normal. So now I can't seem to access recovery at all. I wanted to try going the hard/factory reset route, but obviously can't because I can't access recovery.
Also, I don't know if this is related or not, but now my laptop will not recognize my phone at all. Doesn't give me any options - it will charge, but no connection. I was hoping to load it into Odin and do a stock reset to start from scratch before flashing a custom ROM.
Edit: I tested and connected to a different computer just fine, so there's obviously some miscommunication going on between my phone and laptop.
Can anyone help me out here? Sorry for the long post, I'm just really frustrated. :crying:
I've been stressed out lately about trying to root my Samsung Galaxy J3 Emerge.
I got TWRP 3.1.0-0 and went on install but the supersu 2.82 zip file wasn't showing so I tried to fix it.
First I tried Format Data and that didn't work, then I tried Changing File System for System, Data, and Cache one by one and that seemed to have worked. The supersu file showed and I installed it.
Then I Rebooted System and it said,"No OS Installed! Are you sure you wish to reboot?" and this has happened to me before so I figured it would reboot back into TWRP and I would have to boot to download mode, and install the firmware through Odin, but that didn't happen, what happened instead was when I Rebooted System, on the top right it said,"kernal is not seandroid enforcing, set warrenty bit:kernal" and would keep bootlooping, I went back into TWRP by taking the battery out and putting it back in then holding power, home, and volume up and I was back in TWRP.
The thing is it would keep doing this and I'm kinda stuck right now tbh. I already tried Formatting Data, Flashing a ROM, and installing the SM-J327P Firmware, but nothing worked. I'm guessing the only way to fix this is by changing back to my original File Systems and then installing the Firmware through Odin, but I'm stupid and don't remember the original File Systems. So if any of you could tell me the default File System for System, Data, and Cache or another way to fix this that would be great. Thanks
I'm still stuck in this situation...
Any help plz?
IYaWonaRoo said:
I've been stressed out lately about trying to root my Samsung Galaxy J3 Emerge.
I got TWRP 3.1.0-0 and went on install but the supersu 2.82 zip file wasn't showing so I tried to fix it.
First I tried Format Data and that didn't work, then I tried Changing File System for System, Data, and Cache one by one and that seemed to have worked. The supersu file showed and I installed it.
Then I Rebooted System and it said,"No OS Installed! Are you sure you wish to reboot?" and this has happened to me before so I figured it would reboot back into TWRP and I would have to boot to download mode, and install the firmware through Odin, but that didn't happen, what happened instead was when I Rebooted System, on the top right it said,"kernal is not seandroid enforcing, set warrenty bit:kernal" and would keep bootlooping, I went back into TWRP by taking the battery out and putting it back in then holding power, home, and volume up and I was back in TWRP.
The thing is it would keep doing this and I'm kinda stuck right now tbh. I already tried Formatting Data, Flashing a ROM, and installing the SM-J327P Firmware, but nothing worked. I'm guessing the only way to fix this is by changing back to my original File Systems and then installing the Firmware through Odin, but I'm stupid and don't remember the original File Systems. So if any of you could tell me the default File System for System, Data, and Cache or another way to fix this that would be great. Thanks
Click to expand...
Click to collapse
You have to use the getprop command to get your software number. Then you have to restore that EXACT software. You might have probably updated unknowingly, and the bootloader updated too. So restoring to an older firmware might bootloop. It was a huge pain in the butt to get mines working after this issue but I got it right after a few tries. I flashed the custom J327p rom they made for it, factory reset and just waited until it booted. Was a long time but after trying every restore and refreshing, I got it working. There's the newest firmware out (idk the name since I just have the metro version of this phone now) but only that one will get the phone running. If you ever do get it running, root with magisk as this phone is VERY sensitive to SU and won't work half the time
savagevegeta said:
You have to use the getprop command to get your software number. Then you have to restore that EXACT software. You might have probably updated unknowingly, and the bootloader updated too. So restoring to an older firmware might bootloop. It was a huge pain in the butt to get mines working after this issue but I got it right after a few tries. I flashed the custom J327p rom they made for it, factory reset and just waited until it booted. Was a long time but after trying every restore and refreshing, I got it working. There's the newest firmware out (idk the name since I just have the metro version of this phone now) but only that one will get the phone running. If you ever do get it running, root with magisk as this phone is VERY sensitive to SU and won't work half the time
Click to expand...
Click to collapse
Thanks for the reply but I have tried restoring with a firmware with my exact software number, model, version, changelist, build date, country/carrier(sprint), and security patch level and I did a format data, yet It didn't work... As far as I know, the bootloop was not caused by the firmware, it was caused by me manually changing the Partitions' File Systems, however I do not remember the original File Systems for the partitions. In case this madders, the way I changed it was by pressing "Wipe" in TWRP, then "Advanced Wipe", then selecting "System", then "Repair or Change File System", then "Change File System", and choosing a random button. I also selected "Data" and "Cache" but I did it individually, one at a time.
IYaWonaRoo said:
Thanks for the reply but I have tried restoring with a firmware with my exact software number, model, version, changelist, build date, country/carrier(sprint), and security patch level and I did a format data, yet It didn't work... As far as I know, the bootloop was not caused by the firmware, it was caused by me manually changing the Partitions' File Systems, however I do not remember the original File Systems for the partitions. In case this madders, the way I changed it was by pressing "Wipe" in TWRP, then "Advanced Wipe", then selecting "System", then "Repair or Change File System", then "Change File System", and choosing a random button. I also selected "Data" and "Cache" but I did it individually, one at a time.
Click to expand...
Click to collapse
That's a tough one. I've never touched those options in TWRP. Have you used Odin to completely wipe the phone from everything including TWRP and flashing stock?
savagevegeta said:
That's a tough one. I've never touched those options in TWRP. Have you used Odin to completely wipe the phone from everything including TWRP and flashing stock?
Click to expand...
Click to collapse
I do have a brother that has the EXACT same phone as me so I tried installing TWRP on his phone and checking the original File Systems, however TWRP doesn't install on his phone for some reason. I enabled developer options, USB debugging, OEM, and installed the drivers and when I install TWRP recovery on his phone through odin it says it was successful but for some reason when I boot into the bootloader it's the regular one that comes with the phone and not TWRP. I'm guessing this is because he has low storage (95% used up). But he doesn't cooperate with me and says he doesn't want the TWRP on his phone because virus blah blah idk (and I don't know how to remove it without factory reset, which he doesn't want to do even though he can backup his stuff) also doesn't want to delete or free up storage from his phone. So I'm going to try wiping my phone through odin i guess...
IYaWonaRoo said:
I do have a brother that has the EXACT same phone as me so I tried installing TWRP on his phone and checking the original File Systems, however TWRP doesn't install on his phone for some reason. I enabled developer options, USB debugging, OEM, and installed the drivers and when I install TWRP recovery on his phone through odin it says it was successful but for some reason when I boot into the bootloader it's the regular one that comes with the phone and not TWRP. I'm guessing this is because he has low storage (95% used up). But he doesn't cooperate with me and says he doesn't want the TWRP on his phone because virus blah blah idk (and I don't know how to remove it without factory reset, which he doesn't want to do even though he can backup his stuff) also doesn't want to delete or free up storage from his phone. So I'm going to try wiping my phone through odin i guess...
Click to expand...
Click to collapse
Storage space has nothing to do with flashing recoveries because they have their own partition. I suggest you flash the same TWRP you used on his phone, then as soon as it finishes flashing, boot into recovery IMMEDIATELY by pressing volume up, power, and home. do NOT let the device boot. If you screw up and it gets to the Samsung animation, flash again and try again. This is because some of the latest Android devices tend to restore recovery upon boot for some reason. Through my experience, anyways. Try this and let me know your results.
savagevegeta said:
Storage space has nothing to do with flashing recoveries because they have their own partition. I suggest you flash the same TWRP you used on his phone, then as soon as it finishes flashing, boot into recovery IMMEDIATELY by pressing volume up, power, and home. do NOT let the device boot. If you screw up and it gets to the Samsung animation, flash again and try again. This is because some of the latest Android devices tend to restore recovery upon boot for some reason. Through my experience, anyways. Try this and let me know your results.
Click to expand...
Click to collapse
Ok. It worked and my phone is back, the problem is now my brothers phone keeps popping up a message on his home screen saying, "Unfortunately, TouchWiz home has stopped.", and "Unfortunately, Google Services Framework has stopped", and other messages over and over and he can't do anything after installing TWRP. I've tried rebooting, and force stopping and clearing cache of Google Services and TouchWiz but nothing worked
IYaWonaRoo said:
Ok. It worked and my phone is back, the problem is now my brothers phone keeps popping up a message on his home screen saying, "Unfortunately, TouchWiz home has stopped.", and "Unfortunately, Google Services Framework has stopped", and other messages over and over and he can't do anything after installing TWRP. I've tried rebooting, and force stopping and clearing cache of Google Services and TouchWiz but nothing worked
Click to expand...
Click to collapse
You have to factory reset. I don't know how you're gonna do it but that's the only way to get out of it otherwise you might have been doing something else other than installing TWRP and broke something. I suggest you restore to stock and try again. If you didn't make a back up, you might be bricked unless you flash the stock firmware with a computer
savagevegeta said:
You have to factory reset. I don't know how you're gonna do it but that's the only way to get out of it otherwise you might have been doing something else other than installing TWRP and broke something. I suggest you restore to stock and try again. If you didn't make a back up, you might be bricked unless you flash the stock firmware with a computer
Click to expand...
Click to collapse
Thank you so much for your help! My phone is back and luckily my brother had a backup so we fixed his phone and I rooted with Magisk which apparently I needed a micro SD card because my internal storage showed as 0mb and tried everything to fix it ,which is why I was in this mess in the first place, then I finally decided to buy an SD card and it worked!
IYaWonaRoo said:
Thank you so much for your help! My phone is back and luckily my brother had a backup so we fixed his phone and I rooted with Magisk which apparently I needed a micro SD card because my internal storage showed as 0mb and tried everything to fix it ,which is why I was in this mess in the first place, then I finally decided to buy an SD card and it worked!
Click to expand...
Click to collapse
The steps to fix storage 0mb are clearly posted in the TWRP thread.
ashyx said:
The steps to fix storage 0mb are clearly posted in the TWRP thread.
Click to expand...
Click to collapse
I have tried manually mounting, format data, wiping system, cache, and data one by one, changing the File Systems one by one, and alot more. NOTHING WORKED. However every youtube video that I have seen about rooting my exact phone with twrp, all had and used micro SD cards! I tried avoiding buying one but every time I try to fix it any other way it ends up either not doing anything or screwing up my device. Once savagevegeta helped me out of the mess I caused by trying to fix the 0mb I decided screw it, no other method worked so might as well try buying a SD card, and guess what happened, IT WORKED! And I realized why every single guide and yt video used micro SD cards for my model.
IYaWonaRoo said:
I have tried manually mounting, format data, wiping system, cache, and data one by one, changing the File Systems one by one, and alot more. NOTHING WORKED. However every youtube video that I have seen about rooting my exact phone with twrp, all had and used micro SD cards! I tried avoiding buying one but every time I try to fix it any other way it ends up either not doing anything or screwing up my device. Once savagevegeta helped me out of the mess I caused by trying to fix the 0mb I decided screw it, no other method worked so might as well try buying a SD card, and guess what happened, IT WORKED! And I realized why every single guide and yt video used micro SD cards for my model.
Click to expand...
Click to collapse
I guarantee you're doing it incorrectly. See my TWRP thread for correct instructions to mount data.
ashyx said:
I guarantee you're doing it incorrectly. See my TWRP thread for correct instructions to mount data.
Click to expand...
Click to collapse
I probably was doing it wrong lol. But its fixed now so dont worry
IYaWonaRoo said:
I probably was doing it wrong lol. But its fixed now so dont worry
Click to expand...
Click to collapse
Your data partition will still be unmountable and remain 0mb, which means you are unable to make a backup.
However if you're happy with it in that state...
Re: bootloop
have you tried grabbing the no verity/encrypt form the rooting forum, this solves seandroid problem