I've been stressed out lately about trying to root my Samsung Galaxy J3 Emerge.
I got TWRP 3.1.0-0 and went on install but the supersu 2.82 zip file wasn't showing so I tried to fix it.
First I tried Format Data and that didn't work, then I tried Changing File System for System, Data, and Cache one by one and that seemed to have worked. The supersu file showed and I installed it.
Then I Rebooted System and it said,"No OS Installed! Are you sure you wish to reboot?" and this has happened to me before so I figured it would reboot back into TWRP and I would have to boot to download mode, and install the firmware through Odin, but that didn't happen, what happened instead was when I Rebooted System, on the top right it said,"kernal is not seandroid enforcing, set warrenty bit:kernal" and would keep bootlooping, I went back into TWRP by taking the battery out and putting it back in then holding power, home, and volume up and I was back in TWRP.
The thing is it would keep doing this and I'm kinda stuck right now tbh. I already tried Formatting Data, Flashing a ROM, and installing the SM-J327P Firmware, but nothing worked. I'm guessing the only way to fix this is by changing back to my original File Systems and then installing the Firmware through Odin, but I'm stupid and don't remember the original File Systems. So if any of you could tell me the default File System for System, Data, and Cache or another way to fix this that would be great. Thanks
I'm still stuck in this situation...
Any help plz?
IYaWonaRoo said:
I've been stressed out lately about trying to root my Samsung Galaxy J3 Emerge.
I got TWRP 3.1.0-0 and went on install but the supersu 2.82 zip file wasn't showing so I tried to fix it.
First I tried Format Data and that didn't work, then I tried Changing File System for System, Data, and Cache one by one and that seemed to have worked. The supersu file showed and I installed it.
Then I Rebooted System and it said,"No OS Installed! Are you sure you wish to reboot?" and this has happened to me before so I figured it would reboot back into TWRP and I would have to boot to download mode, and install the firmware through Odin, but that didn't happen, what happened instead was when I Rebooted System, on the top right it said,"kernal is not seandroid enforcing, set warrenty bit:kernal" and would keep bootlooping, I went back into TWRP by taking the battery out and putting it back in then holding power, home, and volume up and I was back in TWRP.
The thing is it would keep doing this and I'm kinda stuck right now tbh. I already tried Formatting Data, Flashing a ROM, and installing the SM-J327P Firmware, but nothing worked. I'm guessing the only way to fix this is by changing back to my original File Systems and then installing the Firmware through Odin, but I'm stupid and don't remember the original File Systems. So if any of you could tell me the default File System for System, Data, and Cache or another way to fix this that would be great. Thanks
Click to expand...
Click to collapse
You have to use the getprop command to get your software number. Then you have to restore that EXACT software. You might have probably updated unknowingly, and the bootloader updated too. So restoring to an older firmware might bootloop. It was a huge pain in the butt to get mines working after this issue but I got it right after a few tries. I flashed the custom J327p rom they made for it, factory reset and just waited until it booted. Was a long time but after trying every restore and refreshing, I got it working. There's the newest firmware out (idk the name since I just have the metro version of this phone now) but only that one will get the phone running. If you ever do get it running, root with magisk as this phone is VERY sensitive to SU and won't work half the time
savagevegeta said:
You have to use the getprop command to get your software number. Then you have to restore that EXACT software. You might have probably updated unknowingly, and the bootloader updated too. So restoring to an older firmware might bootloop. It was a huge pain in the butt to get mines working after this issue but I got it right after a few tries. I flashed the custom J327p rom they made for it, factory reset and just waited until it booted. Was a long time but after trying every restore and refreshing, I got it working. There's the newest firmware out (idk the name since I just have the metro version of this phone now) but only that one will get the phone running. If you ever do get it running, root with magisk as this phone is VERY sensitive to SU and won't work half the time
Click to expand...
Click to collapse
Thanks for the reply but I have tried restoring with a firmware with my exact software number, model, version, changelist, build date, country/carrier(sprint), and security patch level and I did a format data, yet It didn't work... As far as I know, the bootloop was not caused by the firmware, it was caused by me manually changing the Partitions' File Systems, however I do not remember the original File Systems for the partitions. In case this madders, the way I changed it was by pressing "Wipe" in TWRP, then "Advanced Wipe", then selecting "System", then "Repair or Change File System", then "Change File System", and choosing a random button. I also selected "Data" and "Cache" but I did it individually, one at a time.
IYaWonaRoo said:
Thanks for the reply but I have tried restoring with a firmware with my exact software number, model, version, changelist, build date, country/carrier(sprint), and security patch level and I did a format data, yet It didn't work... As far as I know, the bootloop was not caused by the firmware, it was caused by me manually changing the Partitions' File Systems, however I do not remember the original File Systems for the partitions. In case this madders, the way I changed it was by pressing "Wipe" in TWRP, then "Advanced Wipe", then selecting "System", then "Repair or Change File System", then "Change File System", and choosing a random button. I also selected "Data" and "Cache" but I did it individually, one at a time.
Click to expand...
Click to collapse
That's a tough one. I've never touched those options in TWRP. Have you used Odin to completely wipe the phone from everything including TWRP and flashing stock?
savagevegeta said:
That's a tough one. I've never touched those options in TWRP. Have you used Odin to completely wipe the phone from everything including TWRP and flashing stock?
Click to expand...
Click to collapse
I do have a brother that has the EXACT same phone as me so I tried installing TWRP on his phone and checking the original File Systems, however TWRP doesn't install on his phone for some reason. I enabled developer options, USB debugging, OEM, and installed the drivers and when I install TWRP recovery on his phone through odin it says it was successful but for some reason when I boot into the bootloader it's the regular one that comes with the phone and not TWRP. I'm guessing this is because he has low storage (95% used up). But he doesn't cooperate with me and says he doesn't want the TWRP on his phone because virus blah blah idk (and I don't know how to remove it without factory reset, which he doesn't want to do even though he can backup his stuff) also doesn't want to delete or free up storage from his phone. So I'm going to try wiping my phone through odin i guess...
IYaWonaRoo said:
I do have a brother that has the EXACT same phone as me so I tried installing TWRP on his phone and checking the original File Systems, however TWRP doesn't install on his phone for some reason. I enabled developer options, USB debugging, OEM, and installed the drivers and when I install TWRP recovery on his phone through odin it says it was successful but for some reason when I boot into the bootloader it's the regular one that comes with the phone and not TWRP. I'm guessing this is because he has low storage (95% used up). But he doesn't cooperate with me and says he doesn't want the TWRP on his phone because virus blah blah idk (and I don't know how to remove it without factory reset, which he doesn't want to do even though he can backup his stuff) also doesn't want to delete or free up storage from his phone. So I'm going to try wiping my phone through odin i guess...
Click to expand...
Click to collapse
Storage space has nothing to do with flashing recoveries because they have their own partition. I suggest you flash the same TWRP you used on his phone, then as soon as it finishes flashing, boot into recovery IMMEDIATELY by pressing volume up, power, and home. do NOT let the device boot. If you screw up and it gets to the Samsung animation, flash again and try again. This is because some of the latest Android devices tend to restore recovery upon boot for some reason. Through my experience, anyways. Try this and let me know your results.
savagevegeta said:
Storage space has nothing to do with flashing recoveries because they have their own partition. I suggest you flash the same TWRP you used on his phone, then as soon as it finishes flashing, boot into recovery IMMEDIATELY by pressing volume up, power, and home. do NOT let the device boot. If you screw up and it gets to the Samsung animation, flash again and try again. This is because some of the latest Android devices tend to restore recovery upon boot for some reason. Through my experience, anyways. Try this and let me know your results.
Click to expand...
Click to collapse
Ok. It worked and my phone is back, the problem is now my brothers phone keeps popping up a message on his home screen saying, "Unfortunately, TouchWiz home has stopped.", and "Unfortunately, Google Services Framework has stopped", and other messages over and over and he can't do anything after installing TWRP. I've tried rebooting, and force stopping and clearing cache of Google Services and TouchWiz but nothing worked
IYaWonaRoo said:
Ok. It worked and my phone is back, the problem is now my brothers phone keeps popping up a message on his home screen saying, "Unfortunately, TouchWiz home has stopped.", and "Unfortunately, Google Services Framework has stopped", and other messages over and over and he can't do anything after installing TWRP. I've tried rebooting, and force stopping and clearing cache of Google Services and TouchWiz but nothing worked
Click to expand...
Click to collapse
You have to factory reset. I don't know how you're gonna do it but that's the only way to get out of it otherwise you might have been doing something else other than installing TWRP and broke something. I suggest you restore to stock and try again. If you didn't make a back up, you might be bricked unless you flash the stock firmware with a computer
savagevegeta said:
You have to factory reset. I don't know how you're gonna do it but that's the only way to get out of it otherwise you might have been doing something else other than installing TWRP and broke something. I suggest you restore to stock and try again. If you didn't make a back up, you might be bricked unless you flash the stock firmware with a computer
Click to expand...
Click to collapse
Thank you so much for your help! My phone is back and luckily my brother had a backup so we fixed his phone and I rooted with Magisk which apparently I needed a micro SD card because my internal storage showed as 0mb and tried everything to fix it ,which is why I was in this mess in the first place, then I finally decided to buy an SD card and it worked!
IYaWonaRoo said:
Thank you so much for your help! My phone is back and luckily my brother had a backup so we fixed his phone and I rooted with Magisk which apparently I needed a micro SD card because my internal storage showed as 0mb and tried everything to fix it ,which is why I was in this mess in the first place, then I finally decided to buy an SD card and it worked!
Click to expand...
Click to collapse
The steps to fix storage 0mb are clearly posted in the TWRP thread.
ashyx said:
The steps to fix storage 0mb are clearly posted in the TWRP thread.
Click to expand...
Click to collapse
I have tried manually mounting, format data, wiping system, cache, and data one by one, changing the File Systems one by one, and alot more. NOTHING WORKED. However every youtube video that I have seen about rooting my exact phone with twrp, all had and used micro SD cards! I tried avoiding buying one but every time I try to fix it any other way it ends up either not doing anything or screwing up my device. Once savagevegeta helped me out of the mess I caused by trying to fix the 0mb I decided screw it, no other method worked so might as well try buying a SD card, and guess what happened, IT WORKED! And I realized why every single guide and yt video used micro SD cards for my model.
IYaWonaRoo said:
I have tried manually mounting, format data, wiping system, cache, and data one by one, changing the File Systems one by one, and alot more. NOTHING WORKED. However every youtube video that I have seen about rooting my exact phone with twrp, all had and used micro SD cards! I tried avoiding buying one but every time I try to fix it any other way it ends up either not doing anything or screwing up my device. Once savagevegeta helped me out of the mess I caused by trying to fix the 0mb I decided screw it, no other method worked so might as well try buying a SD card, and guess what happened, IT WORKED! And I realized why every single guide and yt video used micro SD cards for my model.
Click to expand...
Click to collapse
I guarantee you're doing it incorrectly. See my TWRP thread for correct instructions to mount data.
ashyx said:
I guarantee you're doing it incorrectly. See my TWRP thread for correct instructions to mount data.
Click to expand...
Click to collapse
I probably was doing it wrong lol. But its fixed now so dont worry
IYaWonaRoo said:
I probably was doing it wrong lol. But its fixed now so dont worry
Click to expand...
Click to collapse
Your data partition will still be unmountable and remain 0mb, which means you are unable to make a backup.
However if you're happy with it in that state...
Re: bootloop
have you tried grabbing the no verity/encrypt form the rooting forum, this solves seandroid problem
Related
Hey,
Rooted my Galaxy Tab plus, then backed it up with TB, then tried to transfer the backup to the external sd... which didn't work. I then very precisely (I thought) followed the instructions for creating permissions to write to the external sd, and as per those instructions, rebooted.
And so my Tab has. Rebooted, and rebooted, and rebooted, and rebooted.
I've got it in recovery mode at the moment... but does anyone know how to get this thing out of circular reboot mode? I'm leery of doing a factory reset from recovery until I know if that will have the desired effect--mainly, getting me back into my Tab. I have the stock firmware and ODIN, if that's what's needed. I just need some advice on which is the best to try.
Or, if there's an altogether different solution, then please share...
This may not be useful to solve your problem. However, FYI,...
I was able to applied the permission mod previously, and afterwards, I did a factory reset. It did not remove the permission mod that I applied. That is, after the reset, it was still able to write the the external SD even though all my data and apps were gone.
So chances are the factory reset is not going to solve your problem.
factory reset doesn't mess with the system partition - it basically just wipes the /data partition. So it won't fix your problem.
If you have ODIN, just find a replacement image and re-image the device.
garyd9 said:
factory reset doesn't mess with the system partition - it basically just wipes the /data partition. So it won't fix your problem.
If you have ODIN, just find a replacement image and re-image the device.
Click to expand...
Click to collapse
I initially downloaded the stock firmare for the US version, after discovering for myself that doing a factory reset from it's semi-bricked state did no good. The original firmare download was somehow incomplete; it reached an "unexpected end" while extracting and so would not work in ODIN. Then my Tab wouldn't connect to the computer I was using at all.
Fortunately, I was able to re-download the firmware and use ODIN on another computer, so I was able to get back to stock. Even after that, however, I had to do a factory reset; for some reason, my Tab downloaded the first update from Samsung, but would not make the leap to LA3. Once I did the factory reset, though, all was well.
Then, of course, I immediately re-rooted and manually made the changes that let me write to the external sd--correctly, this time. No trouble at all on reboot.
Thank God.
The the device came in today and when I turn it on The Google logo comes, turns off and restarts for a boot loop. I even did a full restore using the recovery toolkit like swoggers and even then no luck. I was able to install twrp with no issue. Anyone have the same issue ?
Thanks
Anyone?
saadkhan07 said:
Anyone?
Click to expand...
Click to collapse
I had problems AFTER I installed TWRP, but before that it booted just fine.
My problems started after unlocking the bootloader and installing TWRP. Try wiping as much as possible (except System) with TWRP. I read somewhere it's a problem with the cache partition. I also went into "Mount" in TWRP (I think that's what it's called) and mounted System. I'm telling you all this from memory, not sure exactly how I fixed it, but eventually I was able to turn the phone on.
Hopefully this is the reason you're having problems. It'd be frustrating to have to try and get another one from the Goog.
Hi.
I installed some dodgy app which required root access to operate (but it didn't even though I allowed it in SuperSu) and this is where my problems started.
First of all, I noticed each and every app I tried to run would immediately crash. That included system apps, such as the Settings app. At that stage I was left with only the launcher working and attempts to uninstall apps would also cause a crash. Even the shutdown menu was broken and the phone hung up so I was forced to reboot it by holding the power button for 10 seconds.
After that, the phone would no longer be able to boot, it was stuck in a boot loop, but recovery still worked (TWRP for that matter) so firstly I wiped the cache partitions (including dalvik cache) but that didn't help, as the phone still wouldn't boot. In this case there was only one thing left for me to try and that was the factory reset capability of TWRP which claimed to not even touch internal storage so I was fine with that and did the wipe.
Thankfully, the phone booted afterwards and it welcomed me with the first startup guide (the language selection dialog was really buggy but that's Huawei's fault) and the phone was seemingly ok, except that the whole internal storage had been wiped out but not only that - the external microsd card was empty as well! Could you believe that? I couldn't. TWRP promised not to touch internal storage and the external memory card wasn't even mentioned but why would it wipe it anyway?
That's for the story behind it, now for the actual problems I'm facing right now:
The stock remote app is gone
The boot animation has changed to a different one (now it's a silver "android" logo instead of the "honor" logo)
Battery usage stats are not available (see: http://i.cubeupload.com/BXCknW.png)
Sound quality from the built-in speaker seems noticeably worse
Hereby, I'm asking you guys to help me out with all of this.
The "remote app missing" problem could be solved by someone sharing their apk file with me, that's probably the simplest one to fix.
As for the boot animation, I have no clue as I don't even know what files are responsible for that.
The same for the battery stats problem, I'm already through a couple of full-charge-to-discharge cycles as well as wiping the cache partition, but the problem remains.
The sound quality probably has to do with the DTS sound enhancer. The config file for that is either "/cust/unicom/cn/xml/dolby_config.xml" or "/cust/unicomelectric/cn/xml/dolby_config.xml" and I'm asking you to upload these files somewhere so I can compare them with mine to see if anything is different.
The device I'm using is the H60-L02 variant running the B532 ROM.
Does the 3 buttons method erase internal storage as well? I've already set up quite some apps and having to do it again wouldn't be the most pleasant surprise. But at least in this case I could make some backups and whatnot...
Also, would it work if I flashed B535 straight away or does the 3 buttons method expect the same version which is already installed, in this case B532?
pudup said:
It will wipe internal storage. You can flash any *full* ROM as long as you're not moving up or down from kitkat-lolipop/marshmallow.
Click to expand...
Click to collapse
Okay, so I decided I'd do the whole thing today. I downloaded the full B535 ROM on my PC, backed up all the stuff I care about from the phone to the PC as well, and also I downloaded the MultiTool.
Though the MultiTool thread says this in bold red:
VirusPlus said:
EMUI 3.1 WARNING! Update over rooted or system modded in EMUI 3.1 gives a BRICK.
You have to restore system and REMOVE root before every update in EMUI 3.1 for now.
Click to expand...
Click to collapse
So I also fired up Titanium Backup in order to defrost all the frozen apps, which went fine, and then I wanted to unroot the phone but I've been unable to do so so far.
To unroot, I launch the SuperSU app, navigate to the "Settings" tab and select "Full unroot". The problem being, it just gets stuck on the screen saying "Uninstalling, please wait...". I don't know how long it usually takes to complete, so far I've waited for maybe 10 minutes and nothing seems to change. Should I care about that? Is that warning about updating rooted/modified EMUI 3.1 resulting in a brick still true?
Can I skip this step and just flash the stock recovery followed by the 3 buttons method?
EDIT:
After some trial and error with the multi tool and different recoveries, I was able to finally unroot. Next, I flashed the stock recovery for B532 and attempted to do the 3 buttons method, but it would say "Install failed. The update package does not exist" (could be because I'm doing the update from a USB flash drive as I don't have an micro sd card big enough to fit the package). So I rebooted the phone into system and used the Updater to perfrom a local update where it would let me pick the USB drive. It completed without errors and then rebooted into some kind of updater (black background and some bluish emui colors) where it also took some time to finish thankfully successfully. I can right now see the phone booting and for what it's worth, the boot animation is once again the good old "honor" logo and not that ugly silvery "android" one
And now it's "Optimizing system...". I really hope it finsishes successfully as it's already a bit late here and I wouldn't like the phone to be unusable tomorrow :laugh:
36% ready...
46% it's kind of fun to watch this, and now 49%
I'd like to thank @pudup once more for helping out, I'm not really that much into flashing recoveries, roms and all that myself. Without your help I would probably be too scared to try doing something on my own :crying:
86%, 89%, 95% and 100%. Aww, what a relief Good old stock lock screen and wallpaper.
Hey guys,
I have encountered a serious problem on my device. Today I rebooted my phone once and it has just stuck on the samsung logo. Then the phone began to reboot without ending....It could not just start. With the help of TWRP I have made a full wipe and tried to reinstall my actual firmware Superman 1.10.5, but I always stuck at 25%, the phone did not respond to any actions. I even tried to flash the stock 4-file firmware with Odin, but it did not help, the phone constantly reboots. Sometimes it manages to boot to the stage where the sign "installation of applications" appears, but a while later it stucks again and reboots. Please, help me to solve the issue, because I am begininng to think that it would be unpossible to recover the phone. I am only able to enter the download mode or recovery, anything else does not work.
Thanks....
AuroraLX said:
Hey guys,
I have encountered a serious problem on my device. Today I rebooted my phone once and it has just stuck on the samsung logo. Then the phone began to reboot without ending....It could not just start. With the help of TWRP I have made a full wipe and tried to reinstall my actual firmware Superman 1.10.5, but I always stuck at 25%, the phone did not respond to any actions. I even tried to flash the stock 4-file firmware with Odin, but it did not help, the phone constantly reboots. Sometimes it manages to boot to the stage where the sign "installation of applications" appears, but a while later it stucks again and reboots. Please, help me to solve the issue, because I am begininng to think that it would be unpossible to recover the phone. I am only able to enter the download mode or recovery, anything else does not work.
Thanks....
Click to expand...
Click to collapse
Really sad to hear that story mate. First things first, I assume your BL version is matching with the firmware your flashing right. And when you go to TWRP, can you see /system and /data partition from the mount menu? If not, you have to perform a factory reset. I had issue like that with my Galaxy S7 and usually factory reset(not wiping) helped me with that situation. Since your system can boot up, but crashes after awhile, I do suspect that some of your partition might be corrupted(at least its what happened to me). So trying factory reset can be a good bet for you.
And... I think you have to provide more information with which variant you are using, and your BL version, TWRP version too, solve the problem quicker. Hope this information helps.
CenteaOSD said:
Really sad to hear that story mate. First things first, I assume your BL version is matching with the firmware your flashing right. And when you go to TWRP, can you see /system and /data partition from the mount menu? If not, you have to perform a factory reset. I had issue like that with my Galaxy S7 and usually factory reset(not wiping) helped me with that situation. Since your system can boot up, but crashes after awhile, I do suspect that some of your partition might be corrupted(at least its what happened to me). So trying factory reset can be a good bet for you.
And... I think you have to provide more information with which variant you are using, and your BL version, TWRP version too, solve the problem quicker. Hope this information helps.
Click to expand...
Click to collapse
Yep, you are right, BL versions always matched firmwares. I tried to wipe the phone with TWRP 3.0.2.3 and also to make a factory reset with the stock recovery. The stock firmware, which I tried to flash, was G930FXXU1BPH6_G930FOXE1BPH1_SER consisting of 4 files including BL,AP,CP and CSC. After 3rd or 4th flash of the same stock firmware the phone suddenly became alive and began to boot. Wu-huuu:silly: I was happy as a child. After having successfully launched the stock rom I have again flashed TWRP 3.0.2.3, went to "wipe" option and formatted data. Then I have installed a Superman Rom 1.12 and everything went the right way. I don't understand only one thing: why after having wiped the phone several times and having reseted it through the stock as well as TWRP recovery it didn't want to boot.
As you said, I suppose that the one of partitions was corrupted. Oh damn, I thought that I won't be able to resuscitate this phone.
I have flashed about 20 phones during my life, but I have never ever encountered such serious problems.
I am running stock ROM and have bootloader unlocked and TWRP already installed. The phone was rooted without problems. I was getting an error from Super SU, so I looked up how to fix it online and the suggestion was to install an older version and then try to upgrade it. It was hard to find a zip from a legitimate source but once I found it, TWRP did not show the directory I was looking for (this was previously available when I rooted it). This is where I did something stupid and looked around in the settings and found the Slot A / Slot B option. I switched from B to A and the phone got stuck on the boot animation for several minutes after rebooting. I decided to reboot into TWRP and switched the slot back to B. This brought the phone back but WiFi is off by default and whenever I try to turn it on, it doesn't change.
I have seen a couple of other people mention similar issues about losing wifi after a root or changing the slot. What's the fix? I am wondering if there is anything else "broken" after the slot change and if I should do a factory reset (I would hate to do that as I was almost finished setting up this device). I have also received the error message saying "Process System isn't responding" in the settings menu a few times. It also seems like the finger print scanner isn't recognizing fingerprints any more and face unlock isn't working
One possibility is, that SuperSU isn't that compatible anymore. Magisk does a wonderful job and no problems so far. Maybe you should give it a try and switch from using SuperSU to Magisk.
shagexpert said:
I am running stock ROM and have bootloader unlocked and TWRP already installed. The phone was rooted without problems. I was getting an error from Super SU, so I looked up how to fix it online and the suggestion was to install an older version and then try to upgrade it. It was hard to find a zip from a legitimate source but once I found it, TWRP did not show the directory I was looking for (this was previously available when I rooted it). This is where I did something stupid and looked around in the settings and found the Slot A / Slot B option. I switched from B to A and the phone got stuck on the boot animation for several minutes after rebooting. I decided to reboot into TWRP and switched the slot back to B. This brought the phone back but WiFi is off by default and whenever I try to turn it on, it doesn't change.
I have seen a couple of other people mention similar issues about losing wifi after a root or changing the slot. What's the fix? I am wondering if there is anything else "broken" after the slot change and if I should do a factory reset (I would hate to do that as I was almost finished setting up this device). I have also received the error message saying "Process System isn't responding" in the settings menu a few times. It also seems like the finger print scanner isn't recognizing fingerprints any more and face unlock isn't working
Click to expand...
Click to collapse
I had the same issue when I first got my 6 when I was playing around with the slots. Also my original TWRP install for some reason would crash and reboot whenever I plugged in the data cable while in TWRP. I ended up flashing back to stock OOS 5.1.5 through fastboot (used the flash-all command) and then reinstalled TWRP and everything has been working great since then.
MickyFoley said:
One possibility is, that SuperSU isn't that compatible anymore. Magisk does a wonderful job and no problems so far. Maybe you should give it a try and switch from using SuperSU to Magisk.
Click to expand...
Click to collapse
The instructions I followed already installed Magisk to the phone. I wanted Super SU because some of the other chainfire apps like Liveboot and rooted apps like Titanium backup said Super SU is needed (Titanium said Magisk will work but may not be reliable for some newer versions of the ROM). I can live without liveboot but really need Titanium to reliably transfer data from my older phone.
To be honest I didn't know they did the same thing (magisk and Super SU). I am curious now, what if I factory reset my phone and attempted to install Super SU instead of Magisk this time?
If I do a factory reset (let's say I want it just like it was out of the box and I format the data partition as well), will I need to root the phone again? I am asking because I don't know which part of the instructions I should ignore. I am sure TWRP will already be installed after the reset so I would only need to install the extra apps...
You don't have to format data. Just factory reset it. Then use "fastboot boot twrp.img", don't allow modifications, flash a kernel you want (if you want one - I really recommend ElementalX) and then the latest version of Magisk (16.4 BETA currently). Did so - all fine. And yes: Even Titanium Backup works without any issue with Magisk.
We had similar problems with TWRP on the Razer Phone when it was new. We solved the problem by using the TWRP boot image to flash the stock boot image and then flashing a TWRP zip. I just got the OnePlus 6 yesterday and haven't really messed with it yet but everything sounds the same to me so far.
I read more about TWRP and realized what I was doing wrong when the directory with zip files wasn't showing up. When TWRP showed up I was supposed type in my regular unlock password to decrypt storage. When I did that the folder I was looking for showed up. I made a backup through recovery (which took like an hour, may be because the external flash drive I attached was really slow - and the size of the backup was about 12GB). After that I installed the zip file for Super SU, just to see if it worked - it showed the installation was successful but the app was still missing from the app drawer. Now I wanted to factory reset the device and start over.
I went into wipe and there was nothing listed under the wipe screen. I went into Advanced wipe and wiped whatever was selected by default. The selected items were Dalvik / ART Cache, System, Data. There was also "Internal Storage and USB Storage" that wasn't selected.
I swiped to wipe, it wiped everything. Then asked reboot, I rebooted, got a blank screen with white LED for a long time. When I plugged it into the computer it recognized the device as Qualcomm HS-USB Diagnostics 900E (COM4). I rebooted it by holding Power + Volume Up + Volume Down. I tried to boot into boot loader next. This brought me to another blank screen. The computer still makes a noise when it reboots but screen stays black. The only message that shows up is the one saying boot loader is unlocked. Did I brick my phone? This keeps getting progressively worse.
shagexpert said:
I read more about TWRP and realized what I was doing wrong when the directory with zip files wasn't showing up. When TWRP showed up I was supposed type in my regular unlock password to decrypt storage. When I did that the folder I was looking for showed up. I made a backup through recovery (which took like an hour, may be because the external flash drive I attached was really slow - and the size of the backup was about 12GB). After that I installed the zip file for Super SU, just to see if it worked - it showed the installation was successful but the app was still missing from the app drawer. Now I wanted to factory reset the device and start over.
I went into wipe and there was nothing listed under the wipe screen. I went into Advanced wipe and wiped whatever was selected by default. The selected items were Dalvik / ART Cache, System, Data. There was also "Internal Storage and USB Storage" that wasn't selected.
I swiped to wipe, it wiped everything. Then asked reboot, I rebooted, got a blank screen with white LED for a long time. When I plugged it into the computer it recognized the device as Qualcomm HS-USB Diagnostics 900E (COM4). I rebooted it by holding Power + Volume Up + Volume Down. I tried to boot into boot loader next. This brought me to another blank screen. The computer still makes a noise when it reboots but screen stays black. The only message that shows up is the one saying boot loader is unlocked. Did I brick my phone? This keeps getting progressively worse.
Click to expand...
Click to collapse
OK good news! I tried one more time and fast boot showed up. I was able to get into recovery. I have the backup so I will try to restore that. I don't know what to do after that. I am thinking wiping without getting into advanced mode.
shagexpert said:
OK good news! I tried one more time and fast boot showed up. I was able to get into recovery. I have the backup so I will try to restore that. I don't know what to do after that. I am thinking wiping without getting into advanced mode.
Click to expand...
Click to collapse
When your phone booted straight into that mode with black screen and the led, then you bricked it. Same happened to me 2 days ago. The solution was to use the Msmtool from another thread and it worked great. Just follow the guide. But it will wipe your device. And you have to install oxygenos manually via "local upgrade". If you have a question, just ask
What I ended up doing was restoring from the backup I had. This was the "bad backup" without WiFi and broken finger print and facial recognition. After the restore, I did a normal wipe (not advanced). This reset the phone to factory settings. Once I configured WiFi and signed into my Google account, Google offered to recover from a cloud backup of my One Plus - I didn't know Google made these backups. It downloaded all the apps automatically. I don't know yet if I have sign into all of them all over again.
The bad back up saved my ass, I wasn't even planning on making it. I was just testing the backup feature. That's why you should always do a backup, even if the device isn't in ideal configuration.
shagexpert said:
The instructions I followed already installed Magisk to the phone. I wanted Super SU because some of the other chainfire apps like Liveboot and rooted apps like Titanium backup said Super SU is needed (Titanium said Magisk will work but may not be reliable for some newer versions of the ROM). I can live without liveboot but really need Titanium to reliably transfer data from my older phone.
Click to expand...
Click to collapse
I rooted my phone with Magisk and installed the 5.1.6 via OTA (and reroot via installed Magisk Manager). So no need to install TWRP so far.
Titanium Backup runs flawlessly with Magisk (already on my OP 3T and my OP 5).
So give Magisk a try, I never had such an easy and reliable update as the one from 5.1.5 to 5.1.6
Helium is a great alternative to titanium.