Earlier today, I got an error upon starting up my Samsung Galaxy S5 (T-Mobile) that says "Unfortunately, System UI has stopped." My background has been turned to black and none of the buttons work properly. The phone IS rooted (and has been for about a week), but runs on stock OS (5.0 Lollipop) and stock recovery. I have never flashed a rom on this phone. I already tried restoring from a Titanium Backup I made yesterday before this error ever showed up, but it did nothing. Perhaps it's relevant that this error first happened after I booted the phone in recovery mode (to see what stock recovery looked like), then selected "reboot phone." I also already tried wiping the cache partition, wiping the System UI cache, and rebooting is Safe Mode. None of these worked. I thought unrooting the phone might help, but I accidentally uninstalled SuperSU without removing the root. With the System UI down, I can't install any apps at all, such as SuperSU again or a file explorer that would allow me to remove the "su" folder in /system/bin/. Now I have no way of unrooting, short of wiping the phone. I DO NOT want to do that. How do I get my phone back to normal?
--EDIT-- I finally gave in and did the factory reset. I rooted it again using the same method as before (in order to use Titanium Backup), and just to see what would happen I went to recovery mode. Sure enough, I was greeted with the same error as before. I had already rebooted the phone normally multiple times before trying to use recovery mode, so I have no doubt that the stock recovery mode is the cause of these issues.
Signal2Noise said:
Personally, I don't like Titanium Backup. I seem to be in the minority with that opinion, but it's given me issues in the past. Try flashing a non-stock recovery like TWRP for your S5 and either wiping your phone or wiping and flashing another ROM.
Samsung phones seem to dislike rooted users for some reason
Click to expand...
Click to collapse
Too late, I already wiped the phone. I re-rooted using Chainfire's auto-root, then flashed CWM so that stock recovery doesn't screw me over again. Before restoring from the backup, I booted into CWM recovery and restarted the phone. No error. I hope it stays that way, this whole thing is a huge hassle. There really needs to be a disclaimer with Chainfire's auto-root telling people to get rid of stock recovery!
Hi there
You'd be best served asking for help from the experts who own your device, here:
T-Mobile Galaxy S 5 Q&A, Help & Troubleshooting
Good luck
Hi.
I installed some dodgy app which required root access to operate (but it didn't even though I allowed it in SuperSu) and this is where my problems started.
First of all, I noticed each and every app I tried to run would immediately crash. That included system apps, such as the Settings app. At that stage I was left with only the launcher working and attempts to uninstall apps would also cause a crash. Even the shutdown menu was broken and the phone hung up so I was forced to reboot it by holding the power button for 10 seconds.
After that, the phone would no longer be able to boot, it was stuck in a boot loop, but recovery still worked (TWRP for that matter) so firstly I wiped the cache partitions (including dalvik cache) but that didn't help, as the phone still wouldn't boot. In this case there was only one thing left for me to try and that was the factory reset capability of TWRP which claimed to not even touch internal storage so I was fine with that and did the wipe.
Thankfully, the phone booted afterwards and it welcomed me with the first startup guide (the language selection dialog was really buggy but that's Huawei's fault) and the phone was seemingly ok, except that the whole internal storage had been wiped out but not only that - the external microsd card was empty as well! Could you believe that? I couldn't. TWRP promised not to touch internal storage and the external memory card wasn't even mentioned but why would it wipe it anyway?
That's for the story behind it, now for the actual problems I'm facing right now:
The stock remote app is gone
The boot animation has changed to a different one (now it's a silver "android" logo instead of the "honor" logo)
Battery usage stats are not available (see: http://i.cubeupload.com/BXCknW.png)
Sound quality from the built-in speaker seems noticeably worse
Hereby, I'm asking you guys to help me out with all of this.
The "remote app missing" problem could be solved by someone sharing their apk file with me, that's probably the simplest one to fix.
As for the boot animation, I have no clue as I don't even know what files are responsible for that.
The same for the battery stats problem, I'm already through a couple of full-charge-to-discharge cycles as well as wiping the cache partition, but the problem remains.
The sound quality probably has to do with the DTS sound enhancer. The config file for that is either "/cust/unicom/cn/xml/dolby_config.xml" or "/cust/unicomelectric/cn/xml/dolby_config.xml" and I'm asking you to upload these files somewhere so I can compare them with mine to see if anything is different.
The device I'm using is the H60-L02 variant running the B532 ROM.
Does the 3 buttons method erase internal storage as well? I've already set up quite some apps and having to do it again wouldn't be the most pleasant surprise. But at least in this case I could make some backups and whatnot...
Also, would it work if I flashed B535 straight away or does the 3 buttons method expect the same version which is already installed, in this case B532?
pudup said:
It will wipe internal storage. You can flash any *full* ROM as long as you're not moving up or down from kitkat-lolipop/marshmallow.
Click to expand...
Click to collapse
Okay, so I decided I'd do the whole thing today. I downloaded the full B535 ROM on my PC, backed up all the stuff I care about from the phone to the PC as well, and also I downloaded the MultiTool.
Though the MultiTool thread says this in bold red:
VirusPlus said:
EMUI 3.1 WARNING! Update over rooted or system modded in EMUI 3.1 gives a BRICK.
You have to restore system and REMOVE root before every update in EMUI 3.1 for now.
Click to expand...
Click to collapse
So I also fired up Titanium Backup in order to defrost all the frozen apps, which went fine, and then I wanted to unroot the phone but I've been unable to do so so far.
To unroot, I launch the SuperSU app, navigate to the "Settings" tab and select "Full unroot". The problem being, it just gets stuck on the screen saying "Uninstalling, please wait...". I don't know how long it usually takes to complete, so far I've waited for maybe 10 minutes and nothing seems to change. Should I care about that? Is that warning about updating rooted/modified EMUI 3.1 resulting in a brick still true?
Can I skip this step and just flash the stock recovery followed by the 3 buttons method?
EDIT:
After some trial and error with the multi tool and different recoveries, I was able to finally unroot. Next, I flashed the stock recovery for B532 and attempted to do the 3 buttons method, but it would say "Install failed. The update package does not exist" (could be because I'm doing the update from a USB flash drive as I don't have an micro sd card big enough to fit the package). So I rebooted the phone into system and used the Updater to perfrom a local update where it would let me pick the USB drive. It completed without errors and then rebooted into some kind of updater (black background and some bluish emui colors) where it also took some time to finish thankfully successfully. I can right now see the phone booting and for what it's worth, the boot animation is once again the good old "honor" logo and not that ugly silvery "android" one
And now it's "Optimizing system...". I really hope it finsishes successfully as it's already a bit late here and I wouldn't like the phone to be unusable tomorrow :laugh:
36% ready...
46% it's kind of fun to watch this, and now 49%
I'd like to thank @pudup once more for helping out, I'm not really that much into flashing recoveries, roms and all that myself. Without your help I would probably be too scared to try doing something on my own :crying:
86%, 89%, 95% and 100%. Aww, what a relief Good old stock lock screen and wallpaper.
I've been stressed out lately about trying to root my Samsung Galaxy J3 Emerge.
I got TWRP 3.1.0-0 and went on install but the supersu 2.82 zip file wasn't showing so I tried to fix it.
First I tried Format Data and that didn't work, then I tried Changing File System for System, Data, and Cache one by one and that seemed to have worked. The supersu file showed and I installed it.
Then I Rebooted System and it said,"No OS Installed! Are you sure you wish to reboot?" and this has happened to me before so I figured it would reboot back into TWRP and I would have to boot to download mode, and install the firmware through Odin, but that didn't happen, what happened instead was when I Rebooted System, on the top right it said,"kernal is not seandroid enforcing, set warrenty bit:kernal" and would keep bootlooping, I went back into TWRP by taking the battery out and putting it back in then holding power, home, and volume up and I was back in TWRP.
The thing is it would keep doing this and I'm kinda stuck right now tbh. I already tried Formatting Data, Flashing a ROM, and installing the SM-J327P Firmware, but nothing worked. I'm guessing the only way to fix this is by changing back to my original File Systems and then installing the Firmware through Odin, but I'm stupid and don't remember the original File Systems. So if any of you could tell me the default File System for System, Data, and Cache or another way to fix this that would be great. Thanks
I'm still stuck in this situation...
Any help plz?
IYaWonaRoo said:
I've been stressed out lately about trying to root my Samsung Galaxy J3 Emerge.
I got TWRP 3.1.0-0 and went on install but the supersu 2.82 zip file wasn't showing so I tried to fix it.
First I tried Format Data and that didn't work, then I tried Changing File System for System, Data, and Cache one by one and that seemed to have worked. The supersu file showed and I installed it.
Then I Rebooted System and it said,"No OS Installed! Are you sure you wish to reboot?" and this has happened to me before so I figured it would reboot back into TWRP and I would have to boot to download mode, and install the firmware through Odin, but that didn't happen, what happened instead was when I Rebooted System, on the top right it said,"kernal is not seandroid enforcing, set warrenty bit:kernal" and would keep bootlooping, I went back into TWRP by taking the battery out and putting it back in then holding power, home, and volume up and I was back in TWRP.
The thing is it would keep doing this and I'm kinda stuck right now tbh. I already tried Formatting Data, Flashing a ROM, and installing the SM-J327P Firmware, but nothing worked. I'm guessing the only way to fix this is by changing back to my original File Systems and then installing the Firmware through Odin, but I'm stupid and don't remember the original File Systems. So if any of you could tell me the default File System for System, Data, and Cache or another way to fix this that would be great. Thanks
Click to expand...
Click to collapse
You have to use the getprop command to get your software number. Then you have to restore that EXACT software. You might have probably updated unknowingly, and the bootloader updated too. So restoring to an older firmware might bootloop. It was a huge pain in the butt to get mines working after this issue but I got it right after a few tries. I flashed the custom J327p rom they made for it, factory reset and just waited until it booted. Was a long time but after trying every restore and refreshing, I got it working. There's the newest firmware out (idk the name since I just have the metro version of this phone now) but only that one will get the phone running. If you ever do get it running, root with magisk as this phone is VERY sensitive to SU and won't work half the time
savagevegeta said:
You have to use the getprop command to get your software number. Then you have to restore that EXACT software. You might have probably updated unknowingly, and the bootloader updated too. So restoring to an older firmware might bootloop. It was a huge pain in the butt to get mines working after this issue but I got it right after a few tries. I flashed the custom J327p rom they made for it, factory reset and just waited until it booted. Was a long time but after trying every restore and refreshing, I got it working. There's the newest firmware out (idk the name since I just have the metro version of this phone now) but only that one will get the phone running. If you ever do get it running, root with magisk as this phone is VERY sensitive to SU and won't work half the time
Click to expand...
Click to collapse
Thanks for the reply but I have tried restoring with a firmware with my exact software number, model, version, changelist, build date, country/carrier(sprint), and security patch level and I did a format data, yet It didn't work... As far as I know, the bootloop was not caused by the firmware, it was caused by me manually changing the Partitions' File Systems, however I do not remember the original File Systems for the partitions. In case this madders, the way I changed it was by pressing "Wipe" in TWRP, then "Advanced Wipe", then selecting "System", then "Repair or Change File System", then "Change File System", and choosing a random button. I also selected "Data" and "Cache" but I did it individually, one at a time.
IYaWonaRoo said:
Thanks for the reply but I have tried restoring with a firmware with my exact software number, model, version, changelist, build date, country/carrier(sprint), and security patch level and I did a format data, yet It didn't work... As far as I know, the bootloop was not caused by the firmware, it was caused by me manually changing the Partitions' File Systems, however I do not remember the original File Systems for the partitions. In case this madders, the way I changed it was by pressing "Wipe" in TWRP, then "Advanced Wipe", then selecting "System", then "Repair or Change File System", then "Change File System", and choosing a random button. I also selected "Data" and "Cache" but I did it individually, one at a time.
Click to expand...
Click to collapse
That's a tough one. I've never touched those options in TWRP. Have you used Odin to completely wipe the phone from everything including TWRP and flashing stock?
savagevegeta said:
That's a tough one. I've never touched those options in TWRP. Have you used Odin to completely wipe the phone from everything including TWRP and flashing stock?
Click to expand...
Click to collapse
I do have a brother that has the EXACT same phone as me so I tried installing TWRP on his phone and checking the original File Systems, however TWRP doesn't install on his phone for some reason. I enabled developer options, USB debugging, OEM, and installed the drivers and when I install TWRP recovery on his phone through odin it says it was successful but for some reason when I boot into the bootloader it's the regular one that comes with the phone and not TWRP. I'm guessing this is because he has low storage (95% used up). But he doesn't cooperate with me and says he doesn't want the TWRP on his phone because virus blah blah idk (and I don't know how to remove it without factory reset, which he doesn't want to do even though he can backup his stuff) also doesn't want to delete or free up storage from his phone. So I'm going to try wiping my phone through odin i guess...
IYaWonaRoo said:
I do have a brother that has the EXACT same phone as me so I tried installing TWRP on his phone and checking the original File Systems, however TWRP doesn't install on his phone for some reason. I enabled developer options, USB debugging, OEM, and installed the drivers and when I install TWRP recovery on his phone through odin it says it was successful but for some reason when I boot into the bootloader it's the regular one that comes with the phone and not TWRP. I'm guessing this is because he has low storage (95% used up). But he doesn't cooperate with me and says he doesn't want the TWRP on his phone because virus blah blah idk (and I don't know how to remove it without factory reset, which he doesn't want to do even though he can backup his stuff) also doesn't want to delete or free up storage from his phone. So I'm going to try wiping my phone through odin i guess...
Click to expand...
Click to collapse
Storage space has nothing to do with flashing recoveries because they have their own partition. I suggest you flash the same TWRP you used on his phone, then as soon as it finishes flashing, boot into recovery IMMEDIATELY by pressing volume up, power, and home. do NOT let the device boot. If you screw up and it gets to the Samsung animation, flash again and try again. This is because some of the latest Android devices tend to restore recovery upon boot for some reason. Through my experience, anyways. Try this and let me know your results.
savagevegeta said:
Storage space has nothing to do with flashing recoveries because they have their own partition. I suggest you flash the same TWRP you used on his phone, then as soon as it finishes flashing, boot into recovery IMMEDIATELY by pressing volume up, power, and home. do NOT let the device boot. If you screw up and it gets to the Samsung animation, flash again and try again. This is because some of the latest Android devices tend to restore recovery upon boot for some reason. Through my experience, anyways. Try this and let me know your results.
Click to expand...
Click to collapse
Ok. It worked and my phone is back, the problem is now my brothers phone keeps popping up a message on his home screen saying, "Unfortunately, TouchWiz home has stopped.", and "Unfortunately, Google Services Framework has stopped", and other messages over and over and he can't do anything after installing TWRP. I've tried rebooting, and force stopping and clearing cache of Google Services and TouchWiz but nothing worked
IYaWonaRoo said:
Ok. It worked and my phone is back, the problem is now my brothers phone keeps popping up a message on his home screen saying, "Unfortunately, TouchWiz home has stopped.", and "Unfortunately, Google Services Framework has stopped", and other messages over and over and he can't do anything after installing TWRP. I've tried rebooting, and force stopping and clearing cache of Google Services and TouchWiz but nothing worked
Click to expand...
Click to collapse
You have to factory reset. I don't know how you're gonna do it but that's the only way to get out of it otherwise you might have been doing something else other than installing TWRP and broke something. I suggest you restore to stock and try again. If you didn't make a back up, you might be bricked unless you flash the stock firmware with a computer
savagevegeta said:
You have to factory reset. I don't know how you're gonna do it but that's the only way to get out of it otherwise you might have been doing something else other than installing TWRP and broke something. I suggest you restore to stock and try again. If you didn't make a back up, you might be bricked unless you flash the stock firmware with a computer
Click to expand...
Click to collapse
Thank you so much for your help! My phone is back and luckily my brother had a backup so we fixed his phone and I rooted with Magisk which apparently I needed a micro SD card because my internal storage showed as 0mb and tried everything to fix it ,which is why I was in this mess in the first place, then I finally decided to buy an SD card and it worked!
IYaWonaRoo said:
Thank you so much for your help! My phone is back and luckily my brother had a backup so we fixed his phone and I rooted with Magisk which apparently I needed a micro SD card because my internal storage showed as 0mb and tried everything to fix it ,which is why I was in this mess in the first place, then I finally decided to buy an SD card and it worked!
Click to expand...
Click to collapse
The steps to fix storage 0mb are clearly posted in the TWRP thread.
ashyx said:
The steps to fix storage 0mb are clearly posted in the TWRP thread.
Click to expand...
Click to collapse
I have tried manually mounting, format data, wiping system, cache, and data one by one, changing the File Systems one by one, and alot more. NOTHING WORKED. However every youtube video that I have seen about rooting my exact phone with twrp, all had and used micro SD cards! I tried avoiding buying one but every time I try to fix it any other way it ends up either not doing anything or screwing up my device. Once savagevegeta helped me out of the mess I caused by trying to fix the 0mb I decided screw it, no other method worked so might as well try buying a SD card, and guess what happened, IT WORKED! And I realized why every single guide and yt video used micro SD cards for my model.
IYaWonaRoo said:
I have tried manually mounting, format data, wiping system, cache, and data one by one, changing the File Systems one by one, and alot more. NOTHING WORKED. However every youtube video that I have seen about rooting my exact phone with twrp, all had and used micro SD cards! I tried avoiding buying one but every time I try to fix it any other way it ends up either not doing anything or screwing up my device. Once savagevegeta helped me out of the mess I caused by trying to fix the 0mb I decided screw it, no other method worked so might as well try buying a SD card, and guess what happened, IT WORKED! And I realized why every single guide and yt video used micro SD cards for my model.
Click to expand...
Click to collapse
I guarantee you're doing it incorrectly. See my TWRP thread for correct instructions to mount data.
ashyx said:
I guarantee you're doing it incorrectly. See my TWRP thread for correct instructions to mount data.
Click to expand...
Click to collapse
I probably was doing it wrong lol. But its fixed now so dont worry
IYaWonaRoo said:
I probably was doing it wrong lol. But its fixed now so dont worry
Click to expand...
Click to collapse
Your data partition will still be unmountable and remain 0mb, which means you are unable to make a backup.
However if you're happy with it in that state...
Re: bootloop
have you tried grabbing the no verity/encrypt form the rooting forum, this solves seandroid problem
hello, recently i bought myself a new op6, as it was good for modding and such. unlocked the bootloader, flashed twrp, and rooted it the day after, used it for a couple of days, before I installed elementalX. was happy with that for some days. then I decided I wanted to try out lineageOS, in order to de-google my self, in my quest for privacy.
TL;TR:
mtp is not working after flashing, neither is twrp, cant even access it through fastboot with booting the .img file.
does this have something to do with the a/b partition thing on these phones, perhaps?
I would guess that I flashed lineageOS the wrong way, and that is the issue, but since I cant access twrp, I cant restore and reflash the correct way.
more detailes below
--------------------------------------
backed up before installing elementalX, to have something to go back to, in case of failure
rebooted into twrp, and wiped everything, exept internal storage (i looked this up several places, prior to flashing, that this was the way to do it, so assumed this was the correct way)
flashed lineageOS 15.1
wiped dalvik and rebooted
took ages to boot, so figured id reboot again a couple of times, with no succsess
tried to boot to twrp, to restore back state prior to flashing, but ended up in lineageOS' own recovery.
tried to boot from fastboot, and reflash twrp
goes out of bootloader and screen turns black, led turns on, and nothing. tried waiting for a bit, but nothing seems to happen
have to manually turn of phone, and reboot. tried this several times, but same result.
after reboot i turned to the recovery to look after any solutions there, but nothing
started adb, just to check, and it says "device unauthorized"
sortof gave up, so figured I could atleast get going installing apks, but after downloading f-droid, I couldnt get it to install
found out this was some sort of permission issue, so had to move it to internal storage to get it to install
after installing some apks, I was going to transfer my contacts from my pc, but cant get mtp working..
if someone know a soulution to this, I would be really greatfull, as Im at a loss. cant seem to find anyone who has had a simillar issue..
You can always use EDL and MsmDownloadTool. Check that thread
thanks, will definetly check that out.
now it apears that I have another issue, the key for adb is no longer valid. i did get the prompt when I connected the usb, but that didnt appear to do anything. have tried to revoke it, reanable, reboot both phone and pc, also delete the keys on my pc. I have no root access anymore, so cant really enter the root on my phone, to pull out the keys there, neither can i push my own keys, as it seems atleast. I may be doing it wrong too, for all i know..
If you can enable debugging and see your phone with adb devices, you can adb push /sdcard/<romfile>.zip
I am able to enable debugging mode, yes. Will this enable me to push my own key, or any other existing key for that matter, to remove the unauthorized label?
Id also like to at that i done goofed when flashing lineageOS. Ive come to and understanding that I have to flash OOS 1.5.1 (i think that was it) on both slots, before then flashing the custom rom onto the device, and reflashing twrp after that. Which i did not do. I also were running pie at that time, so theres another mistake I made to begin with. Neither was I really aware of the concept of a/b partition system at hand..
Can i switch slots in fastboot, and then boot inton twrp, and reflash back to OOS 1.5.1, on both slots, and then reflash LOS 15.1? And ofcource reflash twrp and root afterwards, which totally slipped my mind..
I was trying to root my main driver, a Google Pixel 3 running the most recent version of Android. Initially I was going to flash TWRP and then install Magisk, but TWRP for some reason wouldn't flash, so instead I went about trying to go about the Magisk Canary route. I patched the boot image of the most recent Pixel 3 update and proceeded to flash that in the bootloader. That is when everything went wrong. When the phone rebooted, I found that my touchscreen was no longer working. I tried flashing the boot image using platform tools in the bootloader, but I deleted the -w line in flash_all.bat to prevent a full reset; however this did not solve the issue as I had hoped. I then went into device recovery mode and tried the factory reset option there, but that did not work either. The phone booted and I was in the setup screen with no way to press the buttons using the screen, so I connected an OTG USB device to set the device up only to find that the WiFi is not turning on. I believe there are issues with the mobile network as well as I put in a SIM card but it wan't able to connect to the network; however it did read the SIM card successfully as I was able to "turn on" mobile data. I cannot enable USB debugging to flash anything because I cannot allow the computer's USB debugging request; I either have the computer or my OTG device plugged in. Any ideas on what to do? Thank you in advance!
i have almost the exact problem.
could someone please help
Sounds like the option is, factory image flash-all with the wipe. I believe the OP did not disable/remove modules from magisk before updating. That is something that we all should be aware of at this point. Cost me two bootloops and complete resets, but I learned my lesson. Also backup your stuff. I lost a few pictures, but most of my data and such were restored through Tibu.