Related
Hi
Recently I've unlocked my Z5's bootloader and rooted it.
I installed Paranoid android from the thread in the forum, everything was working fine, even the fingerprint sensor was working quite ok.
after a day I wanted to switch the locking option. so i wouldn't use the fingerprint, and only swipe to unlock the phone.
After i changed the settings the app crashed (it changed successfully to swipe instead of using fingerprint)
Now the result is that every time I try to change this specific setting (Screen Lock) the app asks me for my pin, I type it and the settings app crash.
I tried to restart, Clean cheche and uninstalling some google apps. nothing helps
Thank you for the help! :angel:
RomSeeker said:
Hi
Recently I've unlocked my Z5's bootloader and rooted it.
I installed Paranoid android from the thread in the forum, everything was working fine, even the fingerprint sensor was working quite ok.
after a day I wanted to switch the locking option. so i wouldn't use the fingerprint, and only swipe to unlock the phone.
After i changed the settings the app crashed (it changed successfully to swipe instead of using fingerprint)
Now the result is that every time I try to change this specific setting (Screen Lock) the app asks me for my pin, I type it and the settings app crash.
I tried to restart, Clean cheche and uninstalling some google apps. nothing helps
Thank you for the help! :angel:
Click to expand...
Click to collapse
Probably its something from Rom which yoi installed and beacuse that happends.
Solution to try stock based custom rom or back to stock official.
Sent from my D6503
Allek84 said:
Probably its something from Rom which yoi installed and beacuse that happends.
Solution to try stock based custom rom or back to stock official.
Sent from my D6503
Click to expand...
Click to collapse
So obviously it happened because I am no longer stock, But as my experience goes, I know people may have stumbled upon the same problem in their past, and maybe know a solution that will work for me.
I do not want to go back to stock, Because Sony's Stock is ****, serious **** full for bloatware that you cannot remove and battery life that makes you cry.
Your message was not helpful, but thanks for trying
It most likely is a problem with the ROM installed on your device, as you already performed wipes and the problem persists. Try reporting the problem to the rom dev or if its that important, try a different rom for now
Good luck
Hi,
After updating to 7.0 nougat by official Europe update,
My fingerprint sensor stopped responding, when I'm trying to add new fingerprint it wouldn't let me even try, It shows a message (Attention: make sure that the home key is clean and dry, then try again) and then it goes back to the main lock screen settings menu.
I'm really desperate, already tried everything, plz help!
:crying:
Ronohayon10 said:
Hi,
After updating to 7.0 nougat by official Europe update,
My fingerprint sensor stopped responding, when I'm trying to add new fingerprint it wouldn't let me even try, It shows a message (Attention: make sure that the home key is clean and dry, then try again) and then it goes back to the main lock screen settings menu.
I'm really desperate, already tried everything, plz help!
:crying:
Click to expand...
Click to collapse
Have you tried to factory reset or just flash android 7.0 with Odin. I would recommend wiping after installing an update like 7.0 anyway updating always causes bugs and issues for me.
dylanneve1 said:
Have you tried to factory reset or just flash android 7.0 with Odin. I would recommend wiping after installing an update like 7.0 anyway updating always causes bugs and issues for me.
Click to expand...
Click to collapse
I also just updated my SM-G935FD via OTA to Android version 7.0.
Since then, fingerprint scanner is not working. Like for OP, all tests fail under HwModuleTest.
I tried to remove all fingerprints, but it is impossible to add new fingerprints - the error message is "Make sure that the Home key is clean and dry, then try again." Obviously, the fingerprint sensor is as dry and clean as it was before the update (when it worked perfectly).
Since then I tried, unsuccessfully:
- removing old fingerprints and adding new fingerprints (does not work, cf. above)
- formatting cache partition
- performing a hardware reset
- flashed the stock firmware G935FXXU1DQB3 with Odin
Please advice, thanks.
happiness_is_a_process said:
I also just updated my SM-G935FD via OTA to Android version 7.0.
Since then, fingerprint scanner is not working. Like for OP, all tests fail under HwModuleTest.
I tried to remove all fingerprints, but it is impossible to add new fingerprints - the error message is "Make sure that the Home key is clean and dry, then try again." Obviously, the fingerprint sensor is as dry and clean as it was before the update (when it worked perfectly).
Since then I tried, unsuccessfully:
- removing old fingerprints and adding new fingerprints (does not work, cf. above)
- formatting cache partition
- performing a hardware reset
- flashed the stock firmware G935FXXU1DQB3 with Odin
Please advice, thanks.
Click to expand...
Click to collapse
If you have tried to flash stock firmware in Odin, I'm really not sure what the issue is, if it was just a glitch in the software it should probably have been fixed by a wipe and flash with Odin. If your phone is still under warranty I would bring it back into the Samsung shop or contact them over the internet to inquire about fixing it.
The same exact problem has happened to me too . I'm tired of unlocking with patterns
What should we do ?
This cannot be a hardware issue cuz phone was fine right before the update
---------- Post added at 08:16 AM ---------- Previous post was at 08:15 AM ----------
Ronohayon10 said:
Hi,
After updating to 7.0 nougat by official Europe update,
My fingerprint sensor stopped responding, when I'm trying to add new fingerprint it wouldn't let me even try, It shows a message (Attention: make sure that the home key is clean and dry, then try again) and then it goes back to the main lock screen settings menu.
I'm really desperate, already tried everything, plz help!
:crying:
Click to expand...
Click to collapse
Do you still have the issue ?
I have the same problem ???
What the way to fix this issue
I had that problem sometimes and in the end the main reason was really sweat on my fingers and dirt on the home button.
I know this doesn't sound like a solution, but it surprised me as well. Just try drying your fingers and clean the surface of the home button.
Hi There! I encountered the same issue earlier but then suddenly my fingerprint sensor works normally. The last thing I that I made changes to my phone was to reset the password of my samsung account. Not if there was a security breach that happened but after resetting the password, works fine for me. I suggest that you back up your phone's data before and after resetting your Samsung account.
I have this problem for 1 year, tried to change the password but didnt work.
IS someone still struggling with this problem ? Yesterday i upgraded to DevBase 6.0 Oreo newest build. But after the flashing process the fingerprint sensor act in a unusual manner. Sometimes i could unlock the phone sometimes it directly jumps to the pattern unlock screen. Any news about the problem ? I wiped cache/dalvik and i resetted my password of the samsung account - nothing helps.
Any help, ideas, links are highly appreciated
Cheers
Rhonin
Hi,
A few days ago, I was on official Pixel experience rom. Fingerprint unlock started to don't work sometimes. I had to wake up screen with power button before using fingerprint sensor to unlock the phone.
Yesterday, my phone just stopped to react to any fingerprint unlock attempt. I thought that was a software issue, so I decided to migrate to LineageOS. That was a success. However fingerprint sensor doesn't work. Worse : fingerprint settings just disappeared in phone settings.
I would like to know if there is a way to test the hardware part. Or if anyone has gone through this before, any advice will be appreciated.
Thanks.
Phoque_You said:
Hi,
A few days ago, I was on official Pixel experience rom. Fingerprint unlock started to don't work sometimes. I had to wake up screen with power button before using fingerprint sensor to unlock the phone.
Yesterday, my phone just stopped to react to any fingerprint unlock attempt. I thought that was a software issue, so I decided to migrate to LineageOS. That was a success. However fingerprint sensor doesn't work. Worse : fingerprint settings just disappeared in phone settings.
I would like to know if there is a way to test the hardware part. Or if anyone has gone through this before, any advice will be appreciated.
Thanks.
Click to expand...
Click to collapse
I had the same, but I do not remember exactly how I solved it. I think by clean flashing a MIUI developer rom, booting into system, flashing twrp again, format data, and flashing my custom rom.
M1chiel said:
I had the same, but I do not remember exactly how I solved it. I think by clean flashing a MIUI developer rom, booting into system, flashing twrp again, format data, and flashing my custom rom.
Click to expand...
Click to collapse
Thank you for your answer. Do you think I can do a full nandroid backup of my current setting, then format to install MIUI, then restore my backup so I don't lose my data?
Phoque_You said:
Thank you for your answer. Do you think I can do a full nandroid backup of my current setting, then format to install MIUI, then restore my backup so I don't lose my data?
Click to expand...
Click to collapse
You should. I had difficulties with restoring a Nandroid backup, but that was probably related to encryption. So by removing your PIN or password it should work. I used the app Migrate to restore my data.
M1chiel said:
You should. I had difficulties with restoring a Nandroid backup, but that was probably related to encryption. So by removing your PIN or password it should work. I used the app Migrate to restore my data.
Click to expand...
Click to collapse
Thanks. I gonna try that when I get some free time
OK, that was a hardware issue. Everything works fine now. The fingerprint sensor flat cable was mounted fold. This must be the reason.
If someone has the same problem, it's easy to fix it by yourself. You can find cheap tools and part on aliexpress, and disassembly videos on youtube. This took me 30min and it was the first time I opened a phone.
The last photo show the new fingerprint sensor mounted unfolded
Changing the app I was using, I clicked on screen pinning accidentally. I was using the infinite screen and tried to unpin the screen of too much ways, but I couldn't. So I rebooted my phone to get it back. But, when he started, the system don't recognized the fingerprint sensor anymore. Simply I didn't had the unlock for fingerprint option anymore. I tried to wipe (almost) everything, but didn't work. I tried to install other rom, and tried to install a gsi, but all that roms and gsis simply don't recognize that phone has an fingerprint sensor. I think that the problem was with the screen pinning and that created an bug on system. What I do?
I installed an app that test the fingerprint sensor, but he showed an error that said "this app only works on phones with fingerprint sensor.
I was using MIUI V10.2.2.0 stable when it happened
richardqcarvalho said:
Changing the app I was using, I clicked on screen pinning accidentally. I was using the infinite screen and tried to unpin the screen of too much ways, but I couldn't. So I rebooted my phone to get it back. But, when he started, the system don't recognized the fingerprint sensor anymore. Simply I didn't had the unlock for fingerprint option anymore. I tried to wipe (almost) everything, but didn't work. I tried to install other rom, and tried to install a gsi, but all that roms and gsis simply don't recognize that phone has an fingerprint sensor. I think that the problem was with the screen pinning and that created an bug on system. What I do?
I installed an app that test the fingerprint sensor, but he showed an error that said "this app only works on phones with fingerprint sensor.
I was using MIUI V10.2.2.0 stable when it happened
Click to expand...
Click to collapse
Hard reset. If you have done that than flash stock rom with twrp or fastboot.
You have just messed up with settings so hard reset will make you fingerprint working
Rohan Don said:
Hard reset. If you have done that than flash stock rom with twrp or fastboot.
You have just messed up with settings so hard reset will make you fingerprint working
Click to expand...
Click to collapse
I did. I formatted the data and installed again. I installed a gsi. I installed by MiFlash and nothing worked :/
richardqcarvalho said:
I did. I formatted the data and installed again. I installed a gsi. I installed by MiFlash and nothing worked :/
Click to expand...
Click to collapse
Simple..just go to service centre and ask them to reflash the software. If your device will be in warranty then they will fix your problem at no cost.
Rohan Don said:
Simple..just go to service centre and ask them to reflash the software. If your device will be in warranty then they will fix your problem at no cost.
Click to expand...
Click to collapse
I don't have service centre here. I'm brazilian /:
richardqcarvalho said:
I don't have service centre here. I'm brazilian /:
Click to expand...
Click to collapse
Then FCUK xiaomi.
Xiaomi is worst. I will never buy xiaomi again .
richardqcarvalho said:
Changing the app I was using, I clicked on screen pinning accidentally. I was using the infinite screen and tried to unpin the screen of too much ways, but I couldn't. So I rebooted my phone to get it back. But, when he started, the system don't recognized the fingerprint sensor anymore. Simply I didn't had the unlock for fingerprint option anymore. I tried to wipe (almost) everything, but didn't work. I tried to install other rom, and tried to install a gsi, but all that roms and gsis simply don't recognize that phone has an fingerprint sensor. I think that the problem was with the screen pinning and that created an bug on system. What I do?
I installed an app that test the fingerprint sensor, but he showed an error that said "this app only works on phones with fingerprint sensor.
I was using MIUI V10.2.2.0 stable when it happened
Click to expand...
Click to collapse
Try to flash official Xiaomi Rom from official website. Also flash it using MiFlash
Hi guys,
My V500N got an update yesterday and after it was installed fingerprint scanner stopped working to unlock the phone. It is still active and working correctly in all other cases, but as soon as the phone is locked I cannot use fingerprint.
Another clue to troubleshooting may be that I have installed ButtonMapper app to set Assistant button to enable a flashlight. And this function behaves the same.
Any ideas how to fix this?
Kernel ver. 4.14.190
SKQ 1.211103.001
V500N40b
Thank you.
try to factory reset your device
totoy unot said:
try to factory reset your device
Click to expand...
Click to collapse
Thank you for an advise, but it is not an option right now for me. I have nowhere to make an external backup.