Bootloader Unlock on Realme UI V1.0 ? - Realme 5 Pro Questions & Answers

Anybody figured a way to unlock bootloader on Android Q? The in-depth test app wont launch in Realme UI.

same case.. in-depth test app keep crashing.
need update/alternatives.

Same the in depth app test is crashing i hope someone will find a way to unlock a bootloader in android 10 because realme ui sucks cant even play a single rhythm game the taps sometimes is not registering same with emui

I hope they release a new unlock app which also enables unlocking for EU users :/

im waiting for this one too, hope they release new unlocking tool

Downgrade to ColorOS/Android 9 and do the bootloader unlock there. I still have my bootloader unlocked when I updated to Realme UI

MojiinBurrito said:
Downgrade to ColorOS/Android 9 and do the bootloader unlock there. I still have my bootloader unlocked when I updated to Realme UI
Click to expand...
Click to collapse
it's not possible to downgrade if you have locked bootloader on realme ui in the first place

gl33ch3r said:
it's not possible to downgrade if you have locked bootloader on realme ui in the first place
Click to expand...
Click to collapse
Didnt think of that. Well, I'm out of ideas.
I unlocked by bootloader before upgrading just in case I want to go back to android 9 or install a custom rom. Sorry 'bout that.

Go to a realme service center ask them for a downgrade its free

killerhaha100 said:
Go to a realme service center ask them for a downgrade its free
Click to expand...
Click to collapse
cant even go out because of this pandemic that's going on, everyone are advised to keep inside their house, all malls and buildings have shut down for safety precautions, so does realme service center here in my place

gl33ch3r said:
cant even go out because of this pandemic that's going on, everyone are advised to keep inside their house, all malls and buildings have shut down for safety precautions, so does realme service center here in my place
Click to expand...
Click to collapse
You can just download the P2Q and Q2P zip file which is for android 10 developer preview. Keep them in both internal and external storage. Then flash the P2Q zip from the stock recovery. For stock recovery, you have to 1st reboot into Fastboot. Then format (don't wipe) data. After that reboot device. Then move the Q2P file to internal storage and then reboot to stock recovery. After that flash it. Then after reboot, you will see ColorOS 6. Remember to put the files in root storage only. Also before booting into Android 10 dev preview, remove your sim cards.

rttwk97 said:
You can just download the P2Q and Q2P zip file which is for android 10 developer preview. Keep them in both internal and external storage. Then flash the P2Q zip from the stock recovery. For stock recovery, you have to 1st reboot into Fastboot. Then format (don't wipe) data. After that reboot device. Then move the Q2P file to internal storage and then reboot to stock recovery. After that flash it. Then after reboot, you will see ColorOS 6. Remember to put the files in root storage only. Also before booting into Android 10 dev preview, remove your sim cards.
Click to expand...
Click to collapse
can you make a detailed tutorial for this? many users are dying to downgrade from realme ui to coloros6, even the telegram group cant figure it out. and can you please give the link on the files that are needed, i dont get the q2p and p2q zip on how to flash it, thanks. bootloader is locked on our realmeui btw

rttwk97 said:
You can just download the P2Q and Q2P zip file which is for android 10 developer preview. Keep them in both internal and external storage. Then flash the P2Q zip from the stock recovery. For stock recovery, you have to 1st reboot into Fastboot. Then format (don't wipe) data. After that reboot device. Then move the Q2P file to internal storage and then reboot to stock recovery. After that flash it. Then after reboot, you will see ColorOS 6. Remember to put the files in root storage only. Also before booting into Android 10 dev preview, remove your sim cards.
Click to expand...
Click to collapse
in my understanding p2q and q2p are the beta for android q for realme 3/pro does it work on realme 5 pro aswell?

i tried flashing the Q2P from android q recovery, stock recovery is back but it got stuck at the logo. I also tried flashing other rom versions, still didn't work

Related

[BETA][OFFICIAL] Android 7.0 EMUI 5 (L04C567B320) for FRD-L04C567

Build Number: FRD-L04C567B320 (USA)
Files for DOWNLOAD:
Download link:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v68366/f1/full/update.zip
Region Patch:
http://update.hicloud.com:8180/TDS/...66/f1/full/hw/usa/update_data_full_hw_usa.zip
How to install:
1. Requirements: Your device needs to have TWRP custom recovery installed and has to be rooted.
2. Before proceeding make sure that your device model is FRD-L04 from Settings > About phone.
3. Download the update.zip package from above links and copy it to your Sdcard /dload folder.
4. Turn your phone off and reboot into recovery mode by hold Vol up + Power for a few seconds.
5. Back up all the partitions into the external microSD card (recommended).
6. Now go to Install and select the update.zip package you copied to your Sdcard.
7. Upon installation wipe the cache and reboot your phone.
8. In case you encounter issues with Bluetooth, NFC, etc you can try flashing the region package provided above through TWRP.
Warning: As mentioned earlier, this is a beta update that contains many bugs and has several compatibility issues with hardware and 3rd party apps.
USE IT AT YOUR OWN RISK, I'M NOT RESPONSIBLE FOR ANY BROKEN RELATED TO IT
perzan07 said:
Build Number: FRD-L04C567B320 (USA)
Files for DOWNLOAD:
Download link:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v68366/f1/full/update.zip
Region Patch:
http://update.hicloud.com:8180/TDS/...66/f1/full/hw/usa/update_data_full_hw_usa.zip
How to install:
1. Requirements: Your device needs to have TWRP custom recovery installed and has to be rooted.
2. Before proceeding make sure that your device model is FRD-L04 from Settings > About phone.
3. Download the update.zip package from above links and copy it to your Sdcard /dload folder.
4. Turn your phone off and reboot into recovery mode by hold Vol up + Power for a few seconds.
5. Back up all the partitions into the external microSD card (recommended).
6. Now go to Install and select the update.zip package you copied to your Sdcard.
7. Upon installation wipe the cache and reboot your phone.
8. In case you encounter issues with Bluetooth, NFC, etc you can try flashing the region package provided above through TWRP.
Warning: As mentioned earlier, this is a beta update that contains many bugs and has several compatibility issues with hardware and 3rd party apps.
USE IT AT YOUR OWN RISK, I'M NOT RESPONSIBLE FOR ANY BROKEN RELATED TO IT
Click to expand...
Click to collapse
Thanks ..
I might as well post this here -> -> How to: Root and repair data on the FRD-L04 - B320
https://forum.xda-developers.com/showpost.php?p=70266853&postcount=262
Will android pay stop working even if I use the official beta 7.0?
Thanks man, but is there any successful way to flash B324 so far?
Is Wi-Fi calling enabled in this beta?
Managed to do the same using Charles app (see https://forum.xda-developers.com/ho...-to-nougat-t3510275/post69885525#post69885525) without any unlocking and flashing.
I have the FRD-L04B567 phone. I installed the TWRP for the Honor 8. I have installed a different ROM (CM13.1 ROM) successfully. I followed your instructions to the "T" in post #1 . The install of update.zip stopped at /cust with an error. I tried wiping and rebooting but am stuck in the "honor" bootup screen. Unable to force back into TWRP or fastboot or ADB at this time. Still picking up the pieces....
UPDATE: I forced phone into Huawei eRecovery screen and selected factory reset/wipe That got Nougat running but there is no keyboard and Google will only allow voice for any input. Since my wifi is encrypted, I cant give Nougat a password to get on the internet. I am creating a temporary unencrypted network to see if I can get further.
UPDATE: TWRP was wiped so I will reinstall. Then I will try update the regional update (second update mentioned)
UPDATE: Reflashed TWRP 3.0.2.0 for Honor 8, I can get into the bootloader but not recovery, eRecovery works but...(worthless). I cant flash the second update.zip because I cant get TWRP started. Obviously 3.0.2.0 is not compatible with Nougat, I may try 3.0.3.0? why not...
UPDATE - Flashing TWRP 3.0.3.0 was dumb. Now ADB sees the device (good) but I can not get to bootloader or recovery. TWRP flashes (displays) once a second and will not start (bad) . Hopefully someone can learn from my quest.
So, can someone help me proceed from a state where ADB sees the device? thanks Maybe extract update.zip?
thekubiaks said:
So, can someone help me proceed from a state where ADB sees the device? thanks Maybe extract update.zip?
Click to expand...
Click to collapse
This guy
https://forum.xda-developers.com/member.php?u=4210629
Could help you recover, but he will be back only after 15th Jan.
Have you tried Huawei's hisuite? It has a recovery option..
yalokiy said:
This guy
https://forum.xda-developers.com/member.php?u=4210629
Could help you recover, but he will be back only after 15th Jan.
Have you tried Huawei's hisuite? It has a recovery option..
Click to expand...
Click to collapse
Thanks for the reply, I finally got TWRP 3.0.2.0 for Honor 8 flashed (but now it won't work), I believe Nougat and TWRP aren't compatible. Huawei Hisuite said that phone was fine and recovery not necessary??? I disagree. I think I will have to wait for TWRP that is Nougat compatible with FRD-L04
thekubiaks said:
I have the FRD-L04B567 phone. I installed the TWRP for the Honor 8. I have installed a different ROM (CM13.1 ROM) successfully. I followed your instructions to the "T" in post #1 . The install of update.zip stopped at /cust with an error. I tried wiping and rebooting but am stuck in the "honor" bootup screen. Unable to force back into TWRP or fastboot or ADB at this time. Still picking up the pieces....
UPDATE: I forced phone into Huawei eRecovery screen and selected factory reset/wipe That got Nougat running but there is no keyboard and Google will only allow voice for any input. Since my wifi is encrypted, I cant give Nougat a password to get on the internet. I am creating a temporary unencrypted network to see if I can get further.
UPDATE: TWRP was wiped so I will reinstall. Then I will try update the regional update (second update mentioned)
UPDATE: Reflashed TWRP 3.0.2.0 for Honor 8, I can get into the bootloader but not recovery, eRecovery works but...(worthless). I cant flash the second update.zip because I cant get TWRP started. Obviously 3.0.2.0 is not compatible with Nougat, I may try 3.0.3.0? why not...
UPDATE - Flashing TWRP 3.0.3.0 was dumb. Now ADB sees the device (good) but I can not get to bootloader or recovery. TWRP flashes (displays) once a second and will not start (bad) . Hopefully someone can learn from my quest.
So, can someone help me proceed from a state where ADB sees the device? thanks Maybe extract update.zip?
Click to expand...
Click to collapse
If you want to get back to any working state, i recovered from 7.0 unbootable to vanilla 6.0 like so (for frd-l09, but probably still applies):
https://forum.xda-developers.com/honor-8/how-to/honor-8-bricked-t3521813/post70326674#post70326674
// edit, also for completeness, i then flashed twrp 3.0.2 (official) and installed the cm 7.1.1 from the other thread here. All working fine.
fuflo,
thank you for your reply, it helped me get my Honor 8 back up and running.... I am now running CM 14.1 and Nougat 7.1.1 on my FRD-L04
Cheers
---------- Post added at 05:32 AM ---------- Previous post was at 05:31 AM ----------
fuflo,
thank you for your reply, it helped me get my Honor 8 back up and running.... I am now running CM 14.1 and Nougat 7.1.1 on my FRD-L04
Cheers
B320? I used these update files and mine says B317. Am I missing something?
jim262 said:
B320? I used these update files and mine says B317. Am I missing something?
Click to expand...
Click to collapse
Look again in the thread closely, you'll find another script to go to B320
Same problem as above, I could flash the update.zip, but not the USA package, maybe I didn't have the right TWRP version?

US Honor 6x Unable to Boot TWRP Backup of Stock EMUI 5.0 (Help)

Hello there, I've been trying to return to stock EMUI after messing around with some AOSP-based ROMs, but my US model Honor 6x is unable to boot up the TWRP backup of it. And the dload method is unsuccessful, as it just says the firmware is incompatible with my device. Does anyone know a way to return back to stock EMUI and make my device as it was coming out of the factory?
Rommco05 said:
Hi, which is your model number...BLxLxxCxxx? Still you have access to twrp?
Click to expand...
Click to collapse
I believe it's the BLN-L24C567, since I have the US model of the Honor 6x.
Rommco05 said:
Ok, can you flash back twrp?
Click to expand...
Click to collapse
I still have TWRP and the backup of my original software, but it won't boot up. It just goes into a boot loop. I don't know what proper steps to take in order to get the software to boot up again.
Rommco05 said:
Ok, download this two zips and try flash via twrp. First small zip, right after big one. After go to reboot and make reboot recovery, now you will be in stock recovery and here tap factory reset, after normal reboot and should boot to rom
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1279/g104/v82815/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...24_hw_usa/update_data_full_BLN-L24_hw_usa.zip
Click to expand...
Click to collapse
Thank you so much; I'll do it. However, should I do a factory reset or format data in TWRP before flashing these ZIPs?
Rommco05 said:
No, no need be wiped anything
Click to expand...
Click to collapse
The update.zip (the bigger one) ended with "ERROR: 7" I'm not sure if this should have happened or not. Any idea?
Rommco05 said:
Try format data after reboot twrp and again format data now try flash zips.
If this doesn't help, u need this one:
-download Huawei Extractor from xda
-unzip big zip and extract from update.app, recovery.img
-flash recovery.img over fastboot (fastboot flash recovery recovery.img)
-now make update over dload method
(unzip both files and separately put to dload folder on sdcard, first big second small, but must be unzipped)
Click to expand...
Click to collapse
Okay, one more question: For the dload method, do I have both ZIPs in the dload folder and flash it at the same time, or do I flash one ZIP at a time in the stock recovery?
Rommco05 said:
Yes u need install both zips, becasue big one is system and small are apps. Flash stock recovery and after install big one (unzipped) after reboot (if phone boot to rom immediately turn him off) and install second one, same like first
Click to expand...
Click to collapse
My phone is currently installing the first UPDATE.app. Once I go back into the recovery, will my phone know to install UPDATE.APP(1) (the smaller one)? Or will there be a way to select the file? How exactly does it work?
Rommco05 said:
No you need deleted first one from dload and put in second one (small)
Click to expand...
Click to collapse
Sorry to keep asking questions, but how should I turn off the device once the first UPDATE.APP installs? It keeps trying to boot up.
Rommco05 said:
Leave him try boot to rom, should be boot in but rom will be incomplete and after turn him off
edit: if will be booting more like 10 min boot to recovery and here remove sdcard
edit1: hopefully will be all ok, I going slowly sleep
Click to expand...
Click to collapse
Thanks for those edits; I was a bit confused. Thank you for all your help; I'll update you if it works or not. Have a nice night.
I just wanted to leave a reply to let others know what I did:
1. Flashed stock recovery from the big update.zip file (I used the Huawei extractor to get it from the file)
2. Unzipped the big and little zip files
3. Made a folder called dload
4. Put the unzipped contents of the big zip in the dload folder
5. Held power and volume up + down buttons until it installed the big update file
6. I went into the recovery by holding volume up and power
7. I removed the SD card and deleted the contents of the big update and inserted the little update to the dload folder
8. I rebooted and used the same dload method to install the contents of the little update file
9. I went back into the recovery (power and volume up) and did a factory reset
10. I rebooted and everything worked!
11. Installed the intermediate package first and then the official 6.0 software through the dload method
12. Upgraded back to Nougat via the Marshmallow build
Rommco05 said:
Leave him try boot to rom, should be boot in but rom will be incomplete and after turn him off
edit: if will be booting more like 10 min boot to recovery and here remove sdcard
edit1: hopefully will be all ok, I going slowly sleep
Click to expand...
Click to collapse
Thank you for all your help! Seriously, I couldn't have done it without you!
Rommco05 said:
Leave him try boot to rom, should be boot in but rom will be incomplete and after turn him off
edit: if will be booting more like 10 min boot to recovery and here remove sdcard
edit1: hopefully will be all ok, I going slowly sleep
Click to expand...
Click to collapse
The only unfortunate thing was that I received a Nougat beta built, but I think I'll be able to find a finalized version online.
Rommco05 said:
You stuck in beta version? Now you have already instaled stable version
Click to expand...
Click to collapse
I just installed the files from Honor's site (the intermediate package and the 6.0 firmware) and went back to the official Marshmallow build and then upgraded to the official Nougat release. Everything is all good now!
That's good

[guide] how to root zenfone 3 official oreo firmware

HERE IS A STEP BY STEP GUIDE TO ROOT ZENFONE 3 FOR PEOPLE WHO HAVE UNLOCKED THEIR BOOTLOADER AND ROOTED THEIR NOUGAT ROM PREVIOUSLY.
-first of you need to update your firmware to oreo.
-if you have unlocked your phone bootloader and/or rooted, you need to download and flash the latest nougat firmware through stock recovery which is 'WW-14.2020.1712.85' here https://www.asus.com/Phone/ZenFone-3-ZE552KL/HelpDesk_BIOS/
-after you finished flashing the latest nougat firmware, boot your phone as usual. and then download the official oreo firmware which is 'WW-15.0410.1712.31 here https://www.asus.com/Phone/ZenFone-3-ZE552KL/HelpDesk_BIOS/
-then put that 'WW-15.0410.1712.31' firmware to your SD card
-your phone will automatically detect an oreo firmware is available to be flashed that are located on your SD card then click on update
-then your phone will go to the updating/flashing process took around 5-10 minutes. after you're done your phone are now using the official stock firmware.
-then to proceed to root your oreo firmware, you need to flash a TWRP recovery. you can download twrp recovery here https://drive.google.com/drive/folders/1KYX8G6wgOa_X7uJfIar7ENuk2Q1nQyWB
-choose the right model for your phone either ZE520KL(5.0inch) or ZE552KL(5.5inch)
-rename the twrp recovery you just downloaded to "oreo_twrp_recovery.img"
-then put your phone to 'fastboot' mode and connect usb to laptop/pc
-put the twrp recovery that you just downloaded inside the 'Kit Root Zenfone 3' on your laptop/pc
-press shift and right click then click on 'Open command window here'
-then on cmd, type "fastboot flash recovery oreo_twrp_recovery.img" and click enter
-it will tell you flashing is finished
-then click on cmd type 'fastboot reboot' and click enter
-then your phone are now using TWRP recovery instead of the stock recovery
-next, go to magisk manager . com (no space)
-download the magisk manager apk version 5.5.5 [2.4mb]
-download magisk v15 [5.81mb] zip file
-boot your phone and install the magisk manager apk like normal
-then put the magisk v15 zip file to your SD card
-then boot your phone to TWRP recovery and flash the magisk v15 zip file
-after done, reboot system from twrp recovery
-open the magisk manager app and you're ROOTED!
done. your welcome.
[MY REVIEW OF THE OFFICIAL OREO FIRMWARE AFTER ALMOST A WEEK OF USE]
-oreo battery life sucks compare to stock nougat rom
-i can notice the battery drain faster than when im on nougat
-system performance, for me 5-10% faster than on nougat, especially the in settings or swiping the notification panel, other than its the same
-gaming performance are 10-15% worse than on nougat. when i play a game called 'Dokdo', moving the ship around the ocean are smoother when im on nougat and the framerate are stable, but when i play the game on oreo, the framerate are lower and i can feel the difference when im playing on nougat and oreo. the game feels more smoother when im on nougat compare to oreo. other games performance also noticeable when i play 'Rules of Survival', i can feel the framerate are slightly smoother on nougat compare to oreo
-there's no bugs that i found so far
[MY FINAL REVIEW OF ZENFONE 3 OFFICIAL OREO FIRMWARE]
-oreo battery life is real ****, i dont even have many apps installed and the battery life is already ****
-i prefer the nougat firmware compare to oreo.
-the only thing that i like about oreo is the quick settings icon are changed, it looks cleaner and smaller compare to nougat the quick settings icons are bigger and doesn't look good
-everyday i check on https://www.asus.com/Phone/ZenFone-3-ZE552KL/HelpDesk_BIOS/ hoping there's a new oreo firmware update saying 'battery life improved' or something thats all i want
*14 february guide updates*
incase you guys hasn't already know, there's a second(current latest) oreo updates from asus, the firmware is called 'Version WW-15.0410.1801.40'.
if you are on rooted oreo firmware 'Version WW-15.0410.1712.31' and you want to update to the latest oreo version and root it again. follow this steps below:
*NOTE: you can't proceed to flash the stock firmware if you're phone are rooted so you need to unroot or remove magisk root first before flashing the oreo firmware otherwise the flashing process will fail or a possible of bootloop will occur, so follow the steps below carefully*
-first, you need to remove magisk root by downloading the magisk uninstaller zip file from the magisk manager . com (no space) or from their xda page
-then flash/install the magisk uninstaller zip file from TWRP recovery
-after you flashed the uninstaller, you're phone are now unrooted. then you can proceed to flash the 'Version WW-15.0410.1801.40' firmware.
-after you flashed the 'Version WW-15.0410.1801.40' firmware your TWRP recovery will be replaced back to asus stock recovery
-so you need to reinstall TWRP recovery as usual through fastboot
-reboot your phone as usual and as you know your phone root access is currently gone since you uninstalled magisk earlier
-to root your phone back, download and install the latest magisk manager from their site or xda site
-click on download zip file, and put that magisk zip file on your SD CARD
-boot to twrp recovery
-flash the magisk zip file that are located on your SD CARD
-reboot system
-now your latest 'Version WW-15.0410.1801.40' firmware are now rooted again.
YES I KNOW IT IS SUCH A HASSLE, BUT THIS IS WHAT YOU MUST GET THROUGH IF YOU WANT ROOT ACCESS. ANDROID IS NOT EASY.
By the way, don't go to magiskmanager<dot>com. It's not official.
Download Magisk from the official thread here: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
w1040 said:
-next, go to magisk manager . com (no space)
Click to expand...
Click to collapse
Careful with that site, as that's not an official distribution site for Magisk. There was a tweet from XDA regarding that site within the past few weeks. The only 100% trustworthy place to get it is from the official thread.
I'm getting better battery life on Oreo than I did on Nougat. I did do a factory reset after installing Oreo, though, so if you haven't done that it's worth a try.
You're right about the framerate issue with some games. Some that ran fine on Nougat get oddly choppy at times on Oreo. The last Oreo beta (although it had the same version number) was a heck of a lot worse than the release version, so hopefully the next update will help.
the reason why i put the magisk manager official site is because i rooted my phone by downloading both the magisk manager apk and the zip file and the app and the zip file from their official site works for rooting my phone so i think there is no harm. if you feel insecure you can just go to https://forum.xda-developers.com/app...mless-t3473445
Not working.
I exactly followed the steps but I could not install twrp. Stock recovery still keeps running.
However, If I use the previous version of twrp (20180203) phone cannot boot, then had to flash roms from M to O.
Edit: I tried over and over again and succeeded at last, but I do not know how exactly!
asenler said:
I exactly followed the steps but I could not install twrp. Stock recovery still keeps running.
However, If I use the previous version of twrp (20180203) phone cannot boot, then had to flash roms from M to O.
Edit: I tried over and over again and succeeded at last, but I do not know how exactly!
Click to expand...
Click to collapse
at cmd when you're phone on fastboot. after you typed "fastboot flash recovery (name of your recovery)".img and enter, make sure it says flashing successful.
new firmware
How about ZE552KL_ WW_15.0410.1801.40 ?
asenler said:
How about ZE552KL_ WW_15.0410.1801.40 ?
Click to expand...
Click to collapse
what about it? i have yet to flash it
So the same procedure applies.
Flash the update + go to fastboot + re-install magisk.
Success.
Thanks everyone.
asenler said:
So the same procedure applies.
Flash the update + go to fastboot + re-install magisk.
Success.
Thanks everyone.
Click to expand...
Click to collapse
yes, its the same procedure. the latest firmware update is still oreo afterall
GUIDE UPDATES - 14 february
Hi !
So yesterday I tried flashing TWRP but no luck.
I'm on the latest firmware (1801), bootloader unlocked, stock recovery with no root.
When I try to flash TWRP with fastboot, I get no error message but I still have the stock recovery instead of TWRP.
I tried multiple times and downloaded the file again but it doesn't work.
Any idea ?
aftee you flashed twrp through fastboot. type on "fastboot reboot" on cmd. then if your phone directs you to stock recovery instead of twrp. click on reboot system in your stock recovery. then it will brings you to twrp. i know its weird. but thats what happen to me too at first.
then if you finally got to twrp and you reboot system from twrp but your phone still brings you back to twrp recovery everytime or it stucks on asus logo (bootloop), dont panic, go to twrp and flash your stock oreo firmware that are located from ur sdcard from twrp, then when you reboot system from twrp, then your phone will boot to normal. dont worry it wont erase data.
try this. it works for me.
Guys. Can I use the above, android already oreo but not in unlock bootloader.
Putra.dim said:
Guys. Can I use the above, android already oreo but not in unlock bootloader.
Click to expand...
Click to collapse
its not possible to root zenfone 3 without unlocking bootloader.
w1040 said:
its not possible to root zenfone 3 without unlocking bootloader.
Click to expand...
Click to collapse
I've been looking for how to unlock zen 3 oroe. but i did not find it. please help me. i want to root my phone.
Here is the official unlock method.
You will not be able to get OTA updates then, but zenfone3 may not get any upgrade anyway.
I found the solution to my problem (couldn't boot into twrp after flashing it)
1-After flashing twrp, do not fastboot reboot !
2-Unplug the device
3-Power it off (long press power key)
4-Power it on into recovery mod (long press power key + low volume key)
You should end up in twrp recovery or on a screen suggesting to boot into recovery which you do
5-A message will appear asking to allow modification of twrp recovery. Swipe to allow.
6-Done !
w1040 said:
aftee you flashed twrp through fastboot. type on "fastboot reboot" on cmd. then if your phone directs you to stock recovery instead of twrp. click on reboot system in your stock recovery. then it will brings you to twrp. i know its weird. but thats what happen to me too at first.
then if you finally got to twrp and you reboot system from twrp but your phone still brings you back to twrp recovery everytime or it stucks on asus logo (bootloop), dont panic, go to twrp and flash your stock oreo firmware that are located from ur sdcard from twrp, then when you reboot system from twrp, then your phone will boot to normal. dont worry it wont erase data.
try this. it works for me.
Click to expand...
Click to collapse
After updating on 15.0410.1801.40, i flash TWRP through fastboot, and i get stuck in bootloop on Asus logo. I go back in TWRP,flash the 15.0410.1801.40 zip, and i remain in bootloop.
With a custom recovery, we didn't need any No Verity File Encrypt like root in Nougat? (On nougat I root my ZE552KL by following this process: https://forum.xda-developers.com/zenfone-3/how-to/twrp-recovery-3-0-2-root-zenfone-3-t3569926)
siberflyers said:
After updating on 15.0410.1801.40, i flash TWRP through fastboot, and i get stuck in bootloop on Asus logo. I go back in TWRP,flash the 15.0410.1801.40 zip, and i remain in bootloop.
With a custom recovery, we didn't need any No Verity File Encrypt like root in Nougat? (On nougat I root my ZE552KL by following this process: https://forum.xda-developers.com/zenfone-3/how-to/twrp-recovery-3-0-2-root-zenfone-3-t3569926)
Click to expand...
Click to collapse
if you got bootloop after trying to reboot ur phone from twrp after flashing twrp. flashing the stock oreo rom from twrp again will make your phone boot. thats how i did it. im not sure why it doesn't work for you.
we still need "no verity..." message in oreo. that no verity message appears are actually caused by your phone bootloader unlocked not because of your phone rooted.

In need of help! TWRP!

first some back story:
it's been a long time since i did a lot of rooting so i lost a lot of knowledge.
I got the phone close to release in the EU.
There was only BETA stage twrp at the time.
So i flashed this unstable twrp and rooted with magisk.
And i run stock Oxy Rom.
But the main problem is, whenever i boot into recovery, twrp ask me for a password. (i have none) so i press continue.
And it then ask for unmodified system partition. (not sure what to select here)
But when i swipe to allow modification, i can't find the root of the phone? i cannot find the download folder where i flash updates or other modified apk's.
It's all just numbers and random letter. i have no idea on how to proceed or how to update twrp safely without falling into boot loop and other problems.
Some help would be appriciated. Thank you.
saitek1911 said:
first some back story:
it's been a long time since i did a lot of rooting so i lost a lot of knowledge.
I got the phone close to release in the EU.
There was only BETA stage twrp at the time.
So i flashed this unstable twrp and rooted with magisk.
And i run stock Oxy Rom.
But the main problem is, whenever i boot into recovery, twrp ask me for a password. (i have none) so i press continue.
And it then ask for unmodified system partition. (not sure what to select here)
But when i swipe to allow modification, i can't find the root of the phone? i cannot find the download folder where i flash updates or other modified apk's.
It's all just numbers and random letter. i have no idea on how to proceed or how to update twrp safely without falling into boot loop and other problems.
Some help would be appriciated. Thank you.
Click to expand...
Click to collapse
Boot to bootloader, flash original boot img than follow the guide to flash original twrp
Hitman478™ said:
Boot to bootloader, flash original boot img than follow the guide to flash original twrp
Click to expand...
Click to collapse
and which of my problems does this solve?
First of all flash official TWRP now. Makes no sense to use the unofficial version because its not stable.
Enter PW -> decrypt data for TWRP
No PW -> hieroglyphs
I successfully used official twrp, version 3.2.2 and then did a "format data" and then used fastboot again to install the full rom.
Kollachi said:
First of all flash official TWRP now. Makes no sense to use the unofficial version because its not stable.
Enter PW -> decrypt data for TWRP
No PW -> hieroglyphs
Click to expand...
Click to collapse
ok i figured it out, added a password. and now it shows correct folder names etc. thanks.
saitek1911 said:
first some back story:
it's been a long time since i did a lot of rooting so i lost a lot of knowledge.
I got the phone close to release in the EU.
There was only BETA stage twrp at the time.
So i flashed this unstable twrp and rooted with magisk.
And i run stock Oxy Rom.
But the main problem is, whenever i boot into recovery, twrp ask me for a password. (i have none) so i press continue.
And it then ask for unmodified system partition. (not sure what to select here)
But when i swipe to allow modification, i can't find the root of the phone? i cannot find the download folder where i flash updates or other modified apk's.
It's all just numbers and random letter. i have no idea on how to proceed or how to update twrp safely without falling into boot loop and other problems.
Some help would be appriciated. Thank you.
Click to expand...
Click to collapse
U have corrupted u r data partation u have to factory reset along with wiping internal storage and then transfer u r rom File through MTP in sd card of phone and then flash rom.
Or u can flash fastboot flashable rom via fastboot mode.
Then install your official twrp via fastboot mide after installing rom.
Now twrp will detect all data from sd card
pankspoo said:
U have corrupted u r data partation u have to factory reset along with wiping internal storage and then transfer u r rom File through MTP in sd card of phone and then flash rom.
Click to expand...
Click to collapse
Thank you, all i did was add a four digit code when twrp asked me for a password. now the folders are showing up correctly. not just random numbers and letters.
still need to update twrp safely. can i flash a new twrp within twrp or do i need to update via computer?
saitek1911 said:
Thank you, all i did was add a four digit code when twrp asked me for a password. now the folders are showing up correctly. not just random numbers and letters.
still need to update twrp safely. can i flash a new twrp within twrp or do i need to update via computer?
Click to expand...
Click to collapse
U can directly flash new twrp installer in current recovery no problem
saitek1911 said:
and which of my problems does this solve?
Click to expand...
Click to collapse
All of your problems i presume
Can Anyone help me, please? I have somehow the same problem. The phone literally itself without doing anything started doing a download(odin) mode loop. So I deleted data, dalvik, cache, system partitions without internal storage since it has very very important files for me and a lot of projects for the university!!! and before and after the folders in internal storage in twrp shows as random numbers and letters. I don't know why since when the phone was working normally I was protecting it by fingerprint and a password. And when I installed a stock ROM after it without wiping the internal storage. The storage is showing in negative. If anyone can help me this would be super appreciated and helpful. Thank you!
Hitman478™ said:
Boot to bootloader, flash original boot img than follow the guide to flash original twrp
Click to expand...
Click to collapse
Can you help please?
Madara818181 said:
Can Anyone help me, please? I have somehow the same problem. The phone literally itself without doing anything started doing a download(odin) mode loop. So I deleted data, dalvik, cache, system partitions without internal storage since it has very very important files for me and a lot of projects for the university!!! and before and after the folders in internal storage in twrp shows as random numbers and letters. I don't know why since when the phone was working normally I was protecting it by fingerprint and a password. And when I installed a stock ROM after it without wiping the internal storage. The storage is showing in negative. If anyone can help me this would be super appreciated and helpful. Thank you!
Click to expand...
Click to collapse
If it is already showing folders with random file names in the internal storage it means it needs to format data (to remove file encryption) which deletes all files in the internal storage.
Don't wipe system because it removes your OS.
Always secure backup before messing your device.
Hitman478™ said:
Boot to bootloader, flash original boot img than follow the guide to flash original twrp
Click to expand...
Click to collapse
You may try this boot.img just rename to boot.img only.
Credits to RR10 TG channel by Enzo #CatGang.
tiga016 said:
If it is already showing folders with random file names in the internal storage it means it needs to format data (to remove file encryption) which deletes all files in the internal storage.
Don't wipe system because it removes your OS.
Always secure backup before messing your device.
You may try this boot.img just rename to boot.img only.
Credits to RR10 TG channel by Enzo #CatGang.
Click to expand...
Click to collapse
Thanks Man. All my university stuff is in the phone's internal storage so wiping it is no no for me and I need the files today!!! I flashed the boot.img file you attached using TWRP but now the phone is in a boot loop and it did not solve anything!!! Sorry for this but what the f**k should I do man. All my important files are on the phone!!!
Madara818181 said:
Thanks Man. All my university stuff is in the phone's internal storage so wiping it is no no for me and I need the files today!!! I flashed the boot.img file you attached using TWRP but now the phone is in a boot loop and it did not solve anything!!! Sorry for this but what the f**k should I do man. All my important files are on the phone!!!
Click to expand...
Click to collapse
Sorry I thought you are also literally same issues with OP but then it's not. Are you able to reboot to twrp? And what is the whole story of you device? I mean if you are rooted, what ROM you came from and all that you did before the issues occur. And did you tried to switch slot? Since you wiped everything with system included then you have no OS installed. Did you tried to flash OS via OTG? Or flash via fastboot.
I flashed another os without deleting the internal storage but the storage is now showing in negative values. Story is The phone literally itself without doing anything started doing a download(odin) mode loop. So I deleted data, dalvik, cache, system partitions without internal storage since it has very very important files for me and a lot of projects for the university!!! and before and after the folders in internal storage in twrp shows as random numbers and letters. I don't know why since when the phone was working normally I was protecting it by fingerprint and a password. And when I installed a stock ROM after it without wiping the internal storage. The storage is showing in negative and yes I can still boot into twrp
tiga016 said:
Sorry I thought you are also literally same issues with OP but then it's not. Are you able to reboot to twrp? And what is the whole story of you device? I mean if you are rooted, what ROM you came from and all that you did before the issues occur. And did you tried to switch slot? Since you wiped everything with system included then you have no OS installed. Did you tried to flash OS via OTG? Or flash via fastboot.
Click to expand...
Click to collapse
This is the story
Madara818181 said:
This is the story
Click to expand...
Click to collapse
I know that but it seems incomplete. It did not mention what I ask recently. It is always a need for detailed story.

Ultimate guide to install stable or Dev rom from Xiaomi.eu

Hello everyone,
First of all, rom and recovery are not from me... I just want to make a full guide to help you
So let's go !!!!!
1 step: unlock bootloader
https://en.miui.com/unlock/
BE CAREFUL unlocking your bootloader will erase all your data (internal storage) so don't forget to make a backup
2 step: flash twrp recovery
Download the recovery image from here
https://drive.google.com/file/d/1-1CSfT4lQwFZngu6RI9eowLA9CmEMEPw/view?usp=drivesdk
Be sure to have adb and fastboot tools on your computer ... If not take a look at here
https://forum.xda-developers.com/showthread.php?t=2317790
Past TWRP_umi.img on minimal adb and fastboot directory.
Open a cmd here.
Enable usb debugging on your device
Reboot your phone on bootloader (hold volume down + power), connect it to PC and tape:
fastboot devices
fastboot flash recovery TWRP_umi.img
Then tape fastboot reboot while holding volume up button on your devices to reboot in recovery
3 step:
At the first launch of Twrp You have to choose SWIPE TO ALLOW MODIFICATION
4 step:
THIS ONE OF THE MUST IMPORTANT STEP
In twrp menu you have to go in Wipe data on choose format data
Otherwise the ROM will not boot.
5 step:
Reboot into recovery from twrp.
6 step:
Connect your phone to your PC and paste the xiaomi.eu ROM of your choice (stable or Dev)
7 step:
Flash ROM from recovery
8 step:
REBOOT AND ENJOY :good::good::good:
Does Xiaomi EU Rom run either on encrypted and unencrypted storage?
I cant get this to work, ive been trying everything for hours. I am sure i am missing something stupid but if anyone has any new ideas please let me know. I unlocked my device today, flashed twrp via fastboot, rebooted to recovery, formatted data then went on to install xiaomi eu rom. Ever since trying this, i am constantly booting into recovery or hitting a boot loop. i have formatted data more times than i care to think of ha ha. ive tried flashing the latest fastboot rom via mi unlock tool to do a fresh start but keep getting ''flash crclist error". Ive also tried flashing miui stock via twrp and it also, doesn't boot. ive tried many combinations in between. My next option is to try the fastboot global rom (though i believe i have a chinese device), i am waiting for it to download. If anyone knows what i am doing wrong i will be eternally grateful if you can tell me what it is. I'm so frustrated, been flashing roms for years, never had anything take as long as this :crying:
carolef1984 said:
I cant get this to work, ive been trying everything for hours. I am sure i am missing something stupid but if anyone has any new ideas please let me know. I unlocked my device today, flashed twrp via fastboot, rebooted to recovery, formatted data then went on to install xiaomi eu rom. Ever since trying this, i am constantly booting into recovery or hitting a boot loop. i have formatted data more times than i care to think of ha ha. ive tried flashing the latest fastboot rom via mi unlock tool to do a fresh start but keep getting ''flash crclist error". Ive also tried flashing miui stock via twrp and it also, doesn't boot. ive tried many combinations in between. My next option is to try the fastboot global rom (though i believe i have a chinese device), i am waiting for it to download. If anyone knows what i am doing wrong i will be eternally grateful if you can tell me what it is. I'm so frustrated, been flashing roms for years, never had anything take as long as this :crying:
Click to expand...
Click to collapse
try rhis
format data (not wipe)
put rom.zip unto ur internal storage
wipe cache an dalvik cache
now flash the zip
now reboot to recovery
wipe cache an dalvik cache
an now go to reboot menu
an now power off
an now power it on
-fluffy- said:
try rhis
format data (not wipe)
put rom.zip unto ur internal storage
wipe cache an dalvik cache
now flash the zip
now reboot to recovery
wipe cache an dalvik cache
an now go to reboot menu
an now power off
an now power it on
Click to expand...
Click to collapse
Thank you for trying to help, unfortunately it just rebooting to my recovery still. I dont suppose anyone has any other ideas do they please I cant understand what on earth ive done wrong. Does anyone know why mi flash tool comes up with that error (flash crc list error)? qualcomm drivers are installed.
carolef1984 said:
Thank you for trying to help, unfortunately it just rebooting to my recovery still. I dont suppose anyone has any other ideas do they please I cant understand what on earth ive done wrong. Does anyone know why mi flash tool comes up with that error (flash crc list error)? qualcomm drivers are installed.
Click to expand...
Click to collapse
write what u do wen u try to flash the zip
an have u downloadet the correct zip file
Thanks everyone, i think it must have been something to do with the qualcomm drivers installed incorrectly. i have re-done that from scratch and managed to get mi flash tool working. Sorry to waste everyones time.
Greetings
I have followed the tutorials to perfection like 2-3 times and I still face the same issue
I always go back to TWRP after trying to boot into system.
I have tried 2 different recovery files
The experimental one asks for a password. and the other one works but keeps going back to recovery after flashing.
MIUI 11 rom
MIUI 12 rom
No matter what I do It keeps going back to recovery.
It's my only device so I truly need help.
I have tried re installing everything already.
At this point I just want to install stock rom and keep using it without flashing anything please help.
PHONE FINALLY REBOOTING INTO SYSTEM. I myself don't know what i did!!!
Bootloop (stuck on 5G logo) after flashing Xiaomi.eu ROM
Dear fellow XDA-dev community members,
Xiaomi Mi 10 (umi), coming from original stock ROM, MIUI 11 GLOBAL version V11.0.2.0.QJBMIXM.
Bootloader unlocked official way via MiFlash Unlock 4.5.514.47.
Custom recovery TWRP 3.4.1b-0313 installed via XiaoMiTool V2.
Tested root by installing Magisk 20.3 via TWRP, no problem, then updating to Magisk 20.4 with the Magisk Manager 7.5.1.
The problems started when I tried to install Xiaomi.eu Custom ROM : xiaomi.eu_multi_MI10_V11.0.25.0.QJBCNXM_v11-10
Downloaded the Xiaomi.eu ROM to PC, then copied to the Download folder of the Phone.
Started phone in upload mode or TWRP. > Wipe > Swipe to Factory Reset + Format Data.
When formatting data I erase all folders in the phone, including the Xiaomi.eu ROM copied in the Download folder.
Some tutorials suggest to copy the Xiaomi.eu ROM from PC to phone after formatting the data, just by connecting the phone in TWRP to the PC, by going to > Mount and enabling MTP.
Tried this method but when I send the Xiaomi.eu ROM file to the phone the progress bas doesn’t move.
So I restarted the phone, without installing the Custom ROM, went through all the screens of initial phone configuration. Lost Magisk and root (but I supposed that it’s not mandatory to install Custom ROM). Copied again the Xiaomi.eu ROM zip file to the Download folder. Rebooted to TWRP. This time I just did Factory Reset but without Format Data. Then > Install to install the Xiaomi.eu new ROM. Cleared Dalvik Cache then reboot.
PROBLEM : bootloop. Stuck with the 5G logo forever, waited more than 30 min, no change.
Still have access to recovery TWRP and to bootloader mode. I suppose this is a soft brick?
I did > Wipe, Swipe to Factory Reset + Format Data, restarted… no change.
Copied this time the Xiaomi.eu ROM to a clean formatted (FAT32) USB drive. As shown in some tutorials, you can us an external USB drive via USB OTG to install the Custom ROM via TWRP.
Factory Reset + Format Data, then I installed again the same Xiaomi.eu ROM from the external USB. Still stuck in bootloop.
Please I need help to fix the problem
I’m not an expert developer, but I’m not a complete noob either.
This is the first time I have troubles with a brand new Xiaomi Phone.
It’s the first time I get a very expensive phone, but had no choice (they are getting very expensive), because I always buy a Flagship Xiaomi to get all the community support possible.
And I had to change the ROM to Xiaomi.eu, because the Official Global ROM is full of bloatware I had a good experience with Xiaomi.eu ROMs with my old Xiaomi Mi 4 and Mi 5.
At this point I don’t mind going back to stock MIUI Global ROM.
I suppose that with access to boot loader I can flash the Official ROM from PC with MiFlash2020-3-14-0? If it’s the case can somebody show me detailed steps to do that?
For Mi 10 Official Global there is the Stable Full ROM (miui_UMIGlobal_V11.0.2.0.QJBMIXM_4f986c08cb_10.0 ) (2.45 GB) and Stable ROM (umi_global_images_V11.0.2.0.QJBMIXM_20200328.0000.00_10.0_global_09b168ff9e) (3.76 GB). Which One to flash from PC with MiFlash?
I can’t afford to hard brick the device
Thank you very much.
andromomo said:
Dear fellow XDA-dev community members,
Xiaomi Mi 10 (umi), coming from original stock ROM, MIUI 11 GLOBAL version V11.0.2.0.QJBMIXM.
Bootloader unlocked official way via MiFlash Unlock 4.5.514.47.
Custom recovery TWRP 3.4.1b-0313 installed via XiaoMiTool V2.
Tested root by installing Magisk 20.3 via TWRP, no problem, then updating to Magisk 20.4 with the Magisk Manager 7.5.1.
The problems started when I tried to install Xiaomi.eu Custom ROM : xiaomi.eu_multi_MI10_V11.0.25.0.QJBCNXM_v11-10
Downloaded the Xiaomi.eu ROM to PC, then copied to the Download folder of the Phone.
Started phone in upload mode or TWRP. > Wipe > Swipe to Factory Reset + Format Data.
When formatting data I erase all folders in the phone, including the Xiaomi.eu ROM copied in the Download folder.
Some tutorials suggest to copy the Xiaomi.eu ROM from PC to phone after formatting the data, just by connecting the phone in TWRP to the PC, by going to > Mount and enabling MTP.
Tried this method but when I send the Xiaomi.eu ROM file to the phone the progress bas doesn’t move.
So I restarted the phone, without installing the Custom ROM, went through all the screens of initial phone configuration. Lost Magisk and root (but I supposed that it’s not mandatory to install Custom ROM). Copied again the Xiaomi.eu ROM zip file to the Download folder. Rebooted to TWRP. This time I just did Factory Reset but without Format Data. Then > Install to install the Xiaomi.eu new ROM. Cleared Dalvik Cache then reboot.
PROBLEM : bootloop. Stuck with the 5G logo forever, waited more than 30 min, no change.
Still have access to recovery TWRP and to bootloader mode. I suppose this is a soft brick?
I did > Wipe, Swipe to Factory Reset + Format Data, restarted… no change.
Copied this time the Xiaomi.eu ROM to a clean formatted (FAT32) USB drive. As shown in some tutorials, you can us an external USB drive via USB OTG to install the Custom ROM via TWRP.
Factory Reset + Format Data, then I installed again the same Xiaomi.eu ROM from the external USB. Still stuck in bootloop.
Please I need help to fix the problem
I’m not an expert developer, but I’m not a complete noob either.
This is the first time I have troubles with a brand new Xiaomi Phone.
It’s the first time I get a very expensive phone, but had no choice (they are getting very expensive), because I always buy a Flagship Xiaomi to get all the community support possible.
And I had to change the ROM to Xiaomi.eu, because the Official Global ROM is full of bloatware I had a good experience with Xiaomi.eu ROMs with my old Xiaomi Mi 4 and Mi 5.
At this point I don’t mind going back to stock MIUI Global ROM.
I suppose that with access to boot loader I can flash the Official ROM from PC with MiFlash2020-3-14-0? If it’s the case can somebody show me detailed steps to do that?
For Mi 10 Official Global there is the Stable Full ROM (miui_UMIGlobal_V11.0.2.0.QJBMIXM_4f986c08cb_10.0 ) (2.45 GB) and Stable ROM (umi_global_images_V11.0.2.0.QJBMIXM_20200328.0000.00_10.0_global_09b168ff9e) (3.76 GB). Which One to flash from PC with MiFlash?
I can’t afford to hard brick the device
Thank you very much.
Click to expand...
Click to collapse
try this
format data
reboot recovery
connect phone to pc
put zip file ro phone
wipe cache an dalvik cache
install zip
wipe again
reboot recovery
wipe again
go to reboot
power off the phone
now wen its shut down power it on
an it shut boot
it will take a litle time
andromomo said:
Dear fellow XDA-dev community members,
Xiaomi Mi 10 (umi), coming from original stock ROM, MIUI 11 GLOBAL version V11.0.2.0.QJBMIXM.
Bootloader unlocked official way via MiFlash Unlock 4.5.514.47.
Custom recovery TWRP 3.4.1b-0313 installed via XiaoMiTool V2.
Tested root by installing Magisk 20.3 via TWRP, no problem, then updating to Magisk 20.4 with the Magisk Manager 7.5.1.JBMIXM_4f986c08cb_10.0 ) (2.45 GB) and Stable ROM (umi_global_images_V11.0.2.0.QJBM
Thank you very much.
Click to expand...
Click to collapse
hi didt it work for u
IT WORKED properly like a charm!!!
Dear -fluffy-,
Thank you very much for your quick reply.
I followed precisely your instructions. I was able to copy de ROM zip file from PC to the phone (the transfer bas went smoothly, as opposite as before).
IT WORKED properly like a charm!!!
Booting the phone took me 2 min.
---------- Post added at 12:57 PM ---------- Previous post was at 12:47 PM ----------
Dear -fluffy-,
Thank you very much for your quick reply.
I followed precisely your instructions. I was able to copy de ROM zip file from PC to the phone (the transfer bas went smoothly, as opposite as before).
IT WORKED properly like a charm!!!
Booting the phone took me 2 min.
---------- Post added at 01:15 PM ---------- Previous post was at 12:57 PM ----------
I followed precisely your instructions. I was able to copy de ROM zip file from PC to the phone (the transfer bas went smoothly, as opposite as before).
IT WORKED properly like a charm!!!
Booting the phone took me 2 min.
Quick questions, do netflix and google pay work after the flash?
tott2003 said:
Quick questions, do netflix and google pay work after the flash?
Click to expand...
Click to collapse
yes
cedric3320 said:
4 step:
THIS ONE OF THE MUST IMPORTANT STEP
In twrp menu you have to go in Wipe data on choose format data
Click to expand...
Click to collapse
Hello,
i have a silly question about step 4:
someone says we should "Wipe Data", someone says we should "Format Data" ,
i don't see a real difference unless we want to change the filesystem type.
Advices ?
And also, when we format ( or wipe ) the "Data" partition, are we formatting the 256 GB partition ?
if yes, this is a really huge drawback for us who want to change ROM more frequently than other android users, because we have to backup a 256 GB partition ...
This is not fast to do online ( at least with my poor connection ) and it is not fast to do on PC or on a USB KEY.
So we have 256 GB and we need to format at each ROM change ? Too bad ...
In the good old times i did extract my microSD card and i was safe .
Someone could explain me please ?
thank you all for your patience...
adario73 said:
Hello,
i have a silly question about step 4:
someone says we should "Wipe Data", someone says we should "Format Data" ,
i don't see a real difference unless we want to change the filesystem type.
Advices ?
And also, when we format ( or wipe ) the "Data" partition, are we formatting the 256 GB partition ?
if yes, this is a really huge drawback for us who want to change ROM more frequently than other android users, because we have to backup a 256 GB partition ...
This is not fast to do online ( at least with my poor connection ) and it is not fast to do on PC or on a USB KEY.
So we have 256 GB and we need to format at each ROM change ? Too bad ...
In the good old times i did extract my microSD card and i was safe .
Someone could explain me please ?
thank you all for your patience...
Click to expand...
Click to collapse
Hello,
You have to format data the first time you flash xiaomi.eu rom because their rom is base on Chinese firmware (if you don't or just wipe it will not boot)
Each time you will flash a rom with different base (from Chinese base to global base or global to Chinese) you will have to format data !!
You format data to remove encryption.
tott2003 said:
Quick questions, do netflix and google pay work after the flash?
Click to expand...
Click to collapse
Google pay isn't working as the safety net doesn't pass on stable realeses, someone made it to work on betas but I had no luck though
Stuck without solutions
Hello,
I tried to flash the latest miui 12. I followed all the steps...
But now I can't acess recovery nor rom.
Basically when i try to flash TWRP with bootloader it just goes back to fastboot.
Also note that the flash is successful. But I somehow can't acess TWRP, just goes back to fastboot
And when I flash the experimental TWRP on the dev thread it boots to recovery but asks for a password.. Impossible to flash anything.. Even after I formated data and everything
I tried flashing other TWRP I found but nothing boots even after trying a lot of time.
I tried <fastboot boot recovery.img> as well
I tried <fastboot erase recovery> and then flash the TWRP as well
I've been trying hard for the last 8 hours.
I also have a backup of when I had MIUI 12. But impossible to flash it with the only recovery I can boot to.
I feel so desperate. I'm out of ideas.
If you have any ideas, I'm listening
Thanks for the help guys.
Dallee said:
Hello,
I tried to flash the latest miui 12. I followed all the steps...
But now I can't acess recovery nor rom.
Basically when i try to flash TWRP with bootloader it just goes back to fastboot.
Also note that the flash is successful. But I somehow can't acess TWRP, just goes back to fastboot
And when I flash the experimental TWRP on the dev thread it boots to recovery but asks for a password.. Impossible to flash anything.. Even after I formated data and everything
I tried flashing other TWRP I found but nothing boots even after trying a lot of time.
I tried <fastboot boot recovery.img> as well
I tried <fastboot erase recovery> and then flash the TWRP as well
I've been trying hard for the last 8 hours.
I also have a backup of when I had MIUI 12. But impossible to flash it with the only recovery I can boot to.
I feel so desperate. I'm out of ideas.
If you have any ideas, I'm listening
Thanks for the help guys.
Click to expand...
Click to collapse
an what is the latest miui12 u try to flash

Categories

Resources