Related
Hey guys
so after ive rooted my MI4i, i installed a custom ROM called Infinitive OS, which is quite good then i stupidly flashed Sensei Kernel to My MI4i, and now, my phone is bricked. I tried to turn it on, after the Mi logo, it shuts off. I am still able to get to my TWRP Recovery, tried to delete cache/dalvik/factory reset, but no use. Still can't boot to system. PLEASE HELP GUYS
Thanks..
jonathanfilbert said:
Hey guys
so after ive rooted my MI4i, i installed a custom ROM called Infinitive OS, which is quite good then i stupidly flashed Sensei Kernel to My MI4i, and now, my phone is bricked. I tried to turn it on, after the Mi logo, it shuts off. I am still able to get to my TWRP Recovery, tried to delete cache/dalvik/factory reset, but no use. Still can't boot to system. PLEASE HELP GUYS
Thanks..
Click to expand...
Click to collapse
Tried flashing back the rom? and did you get to boot into the rom before flashing the kernel?
Yes, b4 I flashed the kernel everything works fine.
jonathanfilbert said:
Yes, b4 I flashed the kernel everything works fine.
Click to expand...
Click to collapse
If i understand well, if you can get to twrp there is no reason to worry...
You just download an official / developer rom or any custom rom, reflash and you are done.
Yeah I know, thing is, mi4i doesn't have an external memory slot..
jonathanfilbert said:
Yeah I know, thing is, mi4i doesn't have an external memory slot..
Click to expand...
Click to collapse
go to recovery and connect your phone in mtp mode from recovery , take backup from internal memory and flash official stable rom
You may flash the device recovery/kernel/firmware via FastBoot
Flash TWRP Recovery via Fastboot, then adb sideload a ROM on the Device. Or Download Official Fastboot firmware for the device and flash it.
Don't forget to say thanks
flash the device with fastboot rom via FastBoot using mi flash
I have the same problem. Just Go into TWRP and wipe Dalvik/Cache/Data/System, after that just flash ROM again and everything works fine
The problem is with firmware and kernel. The firmware isn't compatible with kernel. If u flash the whole rom with firmware it will be fine, if U know witch FW have u used flash it flash it back or flash back original kernel.
check http://forum.xda-developers.com/mi-4i/development/miui-firmware-flash-t3367968
Regards
Whatever You Do, first take a backup of your EFS Partition with TWRP or MI Toolkit. My device crashed and corrupted all partitions suddenly and my IMEI is lost now and I didn't have any backup of EFS to restore my IMEI.
And for restoring your device back to normal you will have to follow this..
1. Take backup of EFS and store it somewhere safe in you pc.
2. Download and extract the Fastboot ROM for Mi4i from here : http://update.miui.com/updates/v1/fullromdownload.php?d=ferrari_global&b=X&r=global&n=
3. As you have already rooted, I suppose that you already have adb drivers installed. If not then install
4. Open Recovery and press and hole POWER and VOLUME DOWN button after recovery boots up completely and do not release the keys until fastboot opens.
5. open Terminal(Linux)/CMD(Windows) and navigate into the directory you just downloaded and extracted.
5. Run "flash_all.bat"(Windows)/"flash_all.sh"(Linux).
6. Give it some time and you will get a brand new MIUI 7. After flashing miui 7 you can install any rom you wish.
Let me know if your device gets fixed or if you need any help..
Thanks.
not able boot to twrp recovery and even not in system
not able start twrp in my mi4i as system get crashed and now my phone is not booting up just suck in mi logo. plz help not able to start my device and not able flash my device. I think I lose my imei no. because i was trying to change my imei. I have a backup of miui8 by twrp will it help me to start my device. plz help !!!
My mi4i couldn't complete booting,when i try to switch on it will show mi logo and goes to black and again mi logo(mi logo is blinking in a regular interval) the red notification light is also blinking,i tried the mi flash tool ,but the problem is still alive....i was using cm 13 ....somebody please help me
Hello everyone, I'll tell you what happened
First I was in CM13.1, then I flashed to oxygen OS 3.1.4 custom
(When I flash the ROM, without warning me the recovery was updated to the version TWRP 3.0.3-2TugaPower, previously being in a version inferior to 2.8)
After logging in to the new recovery, I noticed that the recovery version was not on the TWRP page, so I decided to flash the most recent version of TWRP (twrp-3.1.1-0-bacon.img), flashe it through Android sdk (Fastboot), everything went well the pc recognized me the OPO in fastboot Mode and flashe the recovery without problems, the problem came when I try to enter the new recovery the OPO does not enter the recovery stays in the OnePlus Logo.
(Before updating the recovery I tried to restate the backup of my previous rom CM13.1 but when I was going to restart it it stays in the OnePlus logo, and when I go to recovery I fixed that in the section of "Mount" system is not checked , Active but still the same, and when I return to recovery is removed.)
I ask you if you can give me ideas to be able to have recovery again and revive my OPO plz.
Molex69 said:
Hello everyone, I'll tell you what happened
First I was in CM13.1, then I flashed to oxygen OS 3.1.4 custom
(When I flash the ROM, without warning me the recovery was updated to the version TWRP 3.0.3-2TugaPower, previously being in a version inferior to 2.8)
After logging in to the new recovery, I noticed that the recovery version was not on the TWRP page, so I decided to flash the most recent version of TWRP (twrp-3.1.1-0-bacon.img), flashe it through Android sdk (Fastboot), everything went well the pc recognized me the OPO in fastboot Mode and flashe the recovery without problems, the problem came when I try to enter the new recovery the OPO does not enter the recovery stays in the OnePlus Logo.
(Before updating the recovery I tried to restate the backup of my previous rom CM13.1 but when I was going to restart it it stays in the OnePlus logo, and when I go to recovery I fixed that in the section of "Mount" system is not checked , Active but still the same, and when I return to recovery is removed.)
I ask you if you can give me ideas to be able to have recovery again and revive my OPO plz.
Click to expand...
Click to collapse
I guess you didn't read the OP of Oxygen Os correctly,he clearly mentioned that this 'Tuga Power Recovery' is patched to work with Oxygen Os's firmware and one should not flash any other recovery.Now,what you can do is this,
https://drive.google.com/file/d/0B-ikULjZZlloNHpOdVBrTzQxZzQ/view?usp=drive_web
> Download This file, install it somewhere and run Revert-2-CM.exe. Make sure you have fastboot drivers installed or it wont work.Avoid using any Antivirus program while doing this as they might give false alarms.After this you'll be restored to TWRP then you can flash any rom you want.The reason due to which you weren't able to find 'TugaPower Recovery' on TWRP page is because this is an Unofficial Recovery.
Question
What does the program do with the OPO?
If you are familiar with fastboot commands, this method should work. Had my OnePlus in the same situation last night messing around with Efidroid. Phone was bootlooping. Efidroid boot menu as well as recovery mode were both inaccessible. I had tried several other things but none worked for me. *CAUTION: this method did ERASE my userdata.* I downloaded a fastboot-able stock full firmware zip, then manually reflashed device. My beloved OnePlus is no longer my daily driver but still my fave device to experiment with so I just used COS 13.1 file. After full reboot, I downloaded and flashed official TWRP. Device is fully functional again, but without OOS installed.
Molex69 said:
What does the program do with the OPO?
Click to expand...
Click to collapse
It'll change your firmware and alter your recovery to a functional TWRP.You'll lose Oxygen Os after doing this.Though you can use this anytime when not being able to flash TWRP.
What should i do
Thanks a lot thanks to the method you told me my OPO has recovery again really thanks, but I have a question, I still in the TugaPower recovery, should I flash the stock recovery or the newest version of TWRP?
Because I do not know if flashing again the TWRP will happen the same
Hello everyone
So here my problems :
I wanted to put Havoc OS on my OP7Pro and i downloaded the TWRP on the official website. After trying to install TWRP but inevitably fail, i followed a thread on how to install TWRP with magisk and after problems after problems arrived.
I cleaned everything and TWRP didn't detect my internal storage, so i tried to put the official rom via a Fastboot rom (since i didn't have access to debug mode and unable to boot) but the fastboot rom rebooted and Qualcom CrashDump (Kernel Restart).
After that i tried MSMdownload tool but was not able to get past "Param Preload" and after i'm stuck with the Kernel_restart of the Crashdump
OnePlus 7 Pro model : GM1913 (France)
If anyone got a solution i'm in
Hilarious! I did the same thing this morning ........ tring to flash cm17 tho but still same kernel flash crash dump etc
So I did the same as you, tried everything....
I was running 10.3.0 originally but after using "flash factory images" with --- https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
and choosing 9.5.13, 7pro fastboot zip, everything is booted now and back to normal
folder with 9.5.13 file-------- https://sourceforge.net/projects/fastbootroms/files/OnePlus 7 Pro/
I even tried manually flash all partitions before using the tool but did not stick, kept booting to crash dump
When I tried the all in one tool and 9.5.13 all is well again.
Very funny you have the same issue as me today but I resolved so you should be able to as well - cheers
jasons1004 said:
Hilarious! I did the same thing this morning ........ tring to flash cm17 tho but still same kernel flash crash dump etc
So I did the same as you, tried everything....
I was running 10.3.0 originally but after using "flash factory images" with --- https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
and choosing 9.5.13, 7pro fastboot zip, everything is booted now and back to normal
folder with 9.5.13 file-------- https://sourceforge.net/projects/fastbootroms/files/OnePlus 7 Pro/
I even tried manually flash all partitions before using the tool but did not stick, kept booting to crash dump
When I tried the all in one tool and 9.5.13 all is well again.
Very funny you have the same issue as me today but I resolved so you should be able to as well - cheers
Click to expand...
Click to collapse
I'm gonna try right now i hope that i can think of you as my savior sir
jasons1004 said:
Hilarious! I did the same thing this morning ........ tring to flash cm17 tho but still same kernel flash crash dump etc
So I did the same as you, tried everything....
I was running 10.3.0 originally but after using "flash factory images" with --- https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
and choosing 9.5.13, 7pro fastboot zip, everything is booted now and back to normal
folder with 9.5.13 file-------- https://sourceforge.net/projects/fastbootroms/files/OnePlus 7 Pro/
I even tried manually flash all partitions before using the tool but did not stick, kept booting to crash dump
When I tried the all in one tool and 9.5.13 all is well again.
Very funny you have the same issue as me today but I resolved so you should be able to as well - cheers
Click to expand...
Click to collapse
I love you sir Everything works
I guess the flash-all.bat was bugged i retry with the programms you linked and everything good right now
ModernLobby said:
I love you sir Everything works
I guess the flash-all.bat was bugged i retry with the programms you linked and everything good right now
Click to expand...
Click to collapse
Great!
However now I am stuck...
When I fastboot boot twrp img I get black screen and nothing happens... so i cant install twrp yet
So I can just re lock bootloader and call it a day and stay on 9 but I like root for Viper at least so I may struggle on.
So I just used the tool instead of doing manual boot / flash twrp. I did the flash recovery and root, choosing Pie twrp and 20.2 magisk options and now working fine.
I am not sure where my error lies but this tool is great LOL..
jasons1004 said:
Great!
However now I am stuck...
When I fastboot boot twrp img I get black screen and nothing happens... so i cant install twrp yet
So I can just re lock bootloader and call it a day and stay on 9 but I like root for Viper at least so I may struggle on.
So I just used the tool instead of doing manual boot / flash twrp. I did the flash recovery and root, choosing Pie twrp and 20.2 magisk options and now working fine.
I am not sure where my error lies but this tool is great LOL..
Click to expand...
Click to collapse
Can i ask you a question i choose the wrong ROM I took gm21aa and i need gm21ba do you think i can reflash the same way or do i need another tool ?
ModernLobby said:
Can i ask you a question i choose the wrong ROM I took gm21aa and i need gm21ba do you think i can reflash the same way or do i need another tool ?
Click to expand...
Click to collapse
just download the file by itself from that folder and select file in the tool instead of download through the tool....if thats what you meant.
jasons1004 said:
just download the file by itself from that folder and select file in the tool instead of download through the tool....if thats what you meant.
Click to expand...
Click to collapse
i'm gonna try since i didn't took the right version it bugged me a little bit ^^
I have had the same issue, getting into edl-mode and start the msm-tool was really a little bit crazy.
Anonymouze said:
I have had the same issue, getting into edl-mode and start the msm-tool was really a little bit crazy.
Click to expand...
Click to collapse
Yeah i got to admit i never had this software working everytime i run into the param preload issue so i tried the issue that jasons1004 told me and now its work fine
Hello guys!
The story began, when I accidently installed a stock OTS update by OP onto my already rooted OP6 with Magsik and TWRP, running a NoLimits ROM...
I just noticed, that the phone said "restart to finish OTS upgrade" or some kind of thing..... I always had the notification on my screen that an update would be available....what surely was ignored because running NoLimits ROM.... but because of some unknown reason, the stock update installed itself magically...
So I ended up finding my phone in complete stock condition, just the unlocked bootloader remained..... F*CK!
I tried to go back to root by trying to install TWRP via fastboot...and that was the beginnig of the end...
By fastboot boot twrp.img, the phone just remained in fastboot mode..... no twrp screen showed up... repeated this a few times, nothing changed....
Somewhere here I read to look up the current slot.... so I did fastboot getvar current-slot.... and after slot b was shown, I flashed twrp into slot b by fastboot flash boot_b twrp.img..... which had the phone stuck in screen "the bootloader is unlocked.....".... so i think that's what is called a BRICK...?
Please guys, help me out...as I don't know how to go on.... I also tried to flash stock boot img from here via fastboot, what didn't work either....
Would be glad for any suggestions...
Thanks!
Alex
dr.zikzak said:
Hello guys!
The story began, when I accidently installed a stock OTS update by OP onto my already rooted OP6 with Magsik and TWRP, running a NoLimits ROM...
I just noticed, that the phone said "restart to finish OTS upgrade" or some kind of thing..... I always had the notification on my screen that an update would be available....what surely was ignored because running NoLimits ROM.... but because of some unknown reason, the stock update installed itself magically...
So I ended up finding my phone in complete stock condition, just the unlocked bootloader remained..... F*CK!
I tried to go back to root by trying to install TWRP via fastboot...and that was the beginnig of the end...
By fastboot boot twrp.img, the phone just remained in fastboot mode..... no twrp screen showed up... repeated this a few times, nothing changed....
Somewhere here I read to look up the current slot.... so I did fastboot getvar current-slot.... and after slot b was shown, I flashed twrp into slot b by fastboot flash boot_b twrp.img..... which had the phone stuck in screen "the bootloader is unlocked.....".... so i think that's what is called a BRICK...?
Please guys, help me out...as I don't know how to go on.... I also tried to flash stock boot img from here via fastboot, what didn't work either....
Would be glad for any suggestions...
Thanks!
Alex
Click to expand...
Click to collapse
i remember that NoLIMIT rom mustbe uninstall before update the oos.In your case i think it was bootloop,softbrick.You boot into fastboob mood and use fastboot rom. and you can root and instant TWRP again.
soihuvuontrang said:
i remember that NoLIMIT rom mustbe uninstall before update the oos.In your case i think it was bootloop,softbrick.You boot into fastboob mood and use fastboot rom. and you can root and instant TWRP again.
Click to expand...
Click to collapse
Hello!
Nothing is working at the moment, just fastboot... not recovery mode, no booting into the OTS...
Tried to use MSM tool but it can't even find the right port....at first, I had COM3 and COM4 showing up, but only N/A....
Now i uninstalled the qualcom drivers as suggested in an unbrick thread of the OP 5T, but that made every port disappear in the MSM tool list.... I'm f*cked I guess...
How can I fix that driver mess again? (driver signing is disabled in bios, testmode is available an working on my pc)
Thanks,
Alex
dr.zikzak said:
Hello!
Nothing is working at the moment, just fastboot... not recovery mode, no booting into the OTS...
Tried to use MSM tool but it can't even find the right port....at first, I had COM3 and COM4 showing up, but only N/A....
Now i uninstalled the qualcom drivers as suggested in an unbrick thread of the OP 5T, but that made every port disappear in the MSM tool list.... I'm f*cked I guess...
How can I fix that driver mess again? (driver signing is disabled in bios, testmode is available an working on my pc)
Thanks,
Alex
Click to expand...
Click to collapse
If you can access fastboot mode you can try follow procedure in next thread:
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
I could recover my system with this @mauronofrio tool a couple of times. In fact, i never have used MSM tool.
dr.zikzak said:
Hello!
Nothing is working at the moment, just fastboot... not recovery mode, no booting into the OTS...
Tried to use MSM tool but it can't even find the right port....at first, I had COM3 and COM4 showing up, but only N/A....
Now i uninstalled the qualcom drivers as suggested in an unbrick thread of the OP 5T, but that made every port disappear in the MSM tool list.... I'm f*cked I guess...
How can I fix that driver mess again? (driver signing is disabled in bios, testmode is available an working on my pc)
Thanks,
Alex
Click to expand...
Click to collapse
boot in to fastboot mode and your fone is not brick,so msm tool isn't used .
you can download newest driver for oneplus on google.
and you can find on forum. hope you will be successful
Kurtinaitis said:
If you can access fastboot mode you can try follow procedure in next thread:
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
I could recover my system with this @mauronofrio tool a couple of times. In fact, i never have used MSM tool.
Click to expand...
Click to collapse
I'll have a try..,.thanks for that!
Regards,
Alex
The method of @mauronofrio worked!!! Thanks a lot!
But I still can't boot twrp on the phone....if I do so, the phone boots into fastboot mode again and freezes at "1+ logo" with "Fastboot Mode" below it..... same like before? The device is fully wiped now...
So how can I get TWRP working again...??
I also tried fastboot flash recovery twrp.img -> no such partition..... don't know why it worked the first time I did it, root and custom ROM without any issues...
Thanks,
Alex
dr.zikzak said:
The method of @mauronofrio worked!!! Thanks a lot!
But I still can't boot twrp on the phone....if I do so, the phone boots into fastboot mode again and freezes at "1+ logo" with "Fastboot Mode" below it..... same like before? The device is fully wiped now...
So how can I get TWRP working again...??
Thanks,
Alex
Click to expand...
Click to collapse
It seems a problem with TWRP version or Fastboot command.
Please, describe your method to flash TWRP and which version do you want to flash
Kurtinaitis said:
It seems a problem with TWRP version or Fastboot command.
Please, describe your method to flash TWRP and which version do you want to flash
Click to expand...
Click to collapse
I downloaded latest twrp-3-3-1.2 (I think) for my OP6, copied the belonging .zip file to my phone... started cmd as admin, typed fastboot devices....the device showed up, then fastboot boot twrp...........img.....enter, and afterwards the "1+" logo showed up, below it read Fastboot Mode...and nothing ever happened... till i switched the phone off again after 10 minutes...
Wrong version you think?
Thanks,
Alex
If you are on Android 10 try to download last version from Mauronofrio or last from Blu-Spark (V9.109). I use blu_spark with OOS 10.3.3
Sometimes the command for being able to boot in recovery from Fastboot is:
Fastboot flash boot "nameofTWRPimage".img
Flash a patched boot image of your rom via fastboot and than flash twrp installer through magisk manager. Done.
Kurtinaitis said:
If you are on Android 10 try to download last version from Mauronofrio or last from Blu-Spark (V9.109). I use blu_spark with OOS 10.3.3
Sometimes the command for being able to boot in recovery from Fastboot is:
Fastboot flash boot "nameofTWRPimage".img
Click to expand...
Click to collapse
Yes that worked for me last time I attempted root.
TWRP update - no boot into system
Hello guys....it's me again!
After getting everything working again because of the tremendous help of this forum, i tried to update my twrp recovery via twrp by installing the twrp zip-file...
Afterwards, i tried to upgrade my rom from NoLimits 11.2 to 11.5 - but the phone didn't boot afterwards....i've always ended up in the recovery menue....
I then changed slots (from b to a) in the recovery, and then, the phone booted again....but into the stock ROM...
I can't change slots again now and have stock rom in slot a as it seams.... how can i change that again? how can i flash the custom rom in the right slot again?
Thanks in advance!
Regards,
Alex
dr.zikzak said:
Hello guys....it's me again!
After getting everything working again because of the tremendous help of this forum, i tried to update my twrp recovery via twrp by installing the twrp zip-file...
Afterwards, i tried to upgrade my rom from NoLimits 11.2 to 11.5 - but the phone didn't boot afterwards....i've always ended up in the recovery menue....
I then changed slots (from b to a) in the recovery, and then, the phone booted again....but into the stock ROM...
I can't change slots again now and have stock rom in slot a as it seams.... how can i change that again? how can i flash the custom rom in the right slot again?
Thanks in advance!
Regards,
Alex
Click to expand...
Click to collapse
It's OK. That's the point of having 2 slots system. Be able to recover the other partition if something goes wrong.
So now... Do you have TWRP or stock recovery?
You can dirty flash stock on the inactive Slot.
I would install stock rom in inactive slot through Local Update un System updater, don't reboot, install TWRP retention script in Magisk Manager (of course only if you have a proper TWRP running, if not avoid this step), don't reboot, install magisk to inactive Slot (through Magisk Manager), reboot.
After that you Will have stock on both partitions. You can try again the XXX Update.
Kurtinaitis said:
It's OK. That's the point of having 2 slots system. Be able to recover the other partition if something goes wrong.
So now... Do you have TWRP or stock recovery?
You can dirty flash stock on the inactive Slot.
I would install stock rom in inactive slot through Local Update un System updater, don't reboot, install TWRP retention script in Magisk Manager (of course only if you have a proper TWRP running, if not avoid this step), don't reboot, install magisk to inactive Slot (through Magisk Manager), reboot.
After that you Will have stock on both partitions. You can try again the XXX Update.
Click to expand...
Click to collapse
Thanks for the fast answer!
I think TWRP is working, nur on slot B - the question is: how come that i Installed TWRP Update via TWRP Recovery, was able to reboot Ingo recovery, and after Flash of the ROM via TWRP, only TWRP Recovery was left... No bootable ROM, so i tried Slot A and that was Stock Rom...
How can i install stock ROM into Slot B if Slot A is currently 'running'?
Regards,
Alex
dr.zikzak said:
Thanks for the fast answer!
I think TWRP is working, nur on slot B - the question is: how come that i Installed TWRP Update via TWRP Recovery, was able to reboot Ingo recovery, and after Flash of the ROM via TWRP, only TWRP Recovery was left... No bootable ROM, so i tried Slot A and that was Stock Rom...
How can i install stock ROM into Slot B if Slot A is currently 'running'?
Regards,
Alex
Click to expand...
Click to collapse
Since Oxygen Os Updater > Local Upgrade.
Download 10.3.4 OOS and put in your internal Storage. Then follow procedure i wrote before
Kurtinaitis said:
Since Oxygen Os Updater > Local Upgrade.
Download 10.3.4 OOS and put in your internal Storage. Then follow procedure i wrote before
Click to expand...
Click to collapse
NOTE: don't reboot until you install Magisk to inactive Slot, and of course, as you're rooted must download Full Zip (not incremental)
Kurtinaitis said:
NOTE: don't reboot until you install Magisk to inactive Slot, and of course, as you're rooted must download Full Zip (not incremental)
Click to expand...
Click to collapse
I downloaded Oxygen Updater, also OOS 10.3.4, but in my system stettings, update button is greyed out.... with the nolimits ROM before, I once had issues that the OEM update got installed...so that led to my problem which made me open up this thread in the first place.... so i disabled system update via titanium backup when I had root access...
So now it's greyed out...but as it is the stock rom, it shouldn't be greyed out as titanium backup doesn't work at the moment, without root...
Should i flash via @mauronofrio's method and fully wipe the device?... would be a pain in the a.. as everything gets erased again, setting up from scratch 2 times within 3 weeks
Regards,
Alex
Would it be possible to install magisk without twrp, and then flash the NoLimits ROM via Magisk?
TWRP recovery must be there....only in slot B - i tried to change slot by fastboot --set-active=..... but it didn't work, unknown command
Regards,
Alex
dr.zikzak said:
I downloaded Oxygen Updater, also OOS 10.3.4, but in my system stettings, update button is greyed out.... with the nolimits ROM before, I once had issues that the OEM update got installed...so that led to my problem which made me open up this thread in the first place.... so i disabled system update via titanium backup when I had root access...
So now it's greyed out...but as it is the stock rom, it shouldn't be greyed out as titanium backup doesn't work at the moment, without root...
Should i flash via @mauronofrio's method and fully wipe the device?... would be a pain in the a.. as everything gets erased again, setting up from scratch 2 times within 3 weeks
Regards,
Alex
Click to expand...
Click to collapse
Did you try to install the Update since the app Oxygen Updater?
---------- Post added at 09:08 PM ---------- Previous post was at 09:02 PM ----------
dr.zikzak said:
Would it be possible to install magisk without twrp, and then flash the NoLimits ROM via Magisk?
TWRP recovery must be there....only in slot B - i tried to change slot by fastboot --set-active=..... but it didn't work, unknown command
Regards,
Alex
Click to expand...
Click to collapse
I think there's some thread in Guides and News in which OP uploads some patched boot.img le something like that to have root but i never tried.
Hi!
I have a poco f2 pro that was on the xiaomi.eu MIUI weekly.
Yesterday I installed a module for Magisk and got into a bootloop. From now everything's fine I usually know how to deal with this kind of stuff.
The mistake I did, is when I tried to boot into a new TWRP after flashing.
I did
Code:
fastboot flash boot ./twrp_xxx.img
instead of
Code:
fastboot flash recovery ./twrp_xxx.img
I tried many times flashing different boot.img without success, I didn't managed to install "magisk manager for recovery" so I did a clean flash of the rom, and then I even tried downloading the stock global from from https://xiaomifirmwareupdater.com/ and did a "flashall" without success (the phone boots on bootloader/recovery).
Fortunately I havent yet locked the bootloader so I can still flash everything.
Can someone help me figure out why my phone is doing this even after flashing everything please?
Did you try with Miflash?
try with MiFlash. Flash stock rom in fastboot mode
Hi! Thak you for the quick answer
I don't know why but I believed that the only thing miflash do is to execute the scripts from the folder.... I'll try this now
Thelm76 said:
Hi! Thak you for the quick answer
I don't know why but I believed that the only thing miflash do is to execute the scripts from the folder.... I'll try this now
Click to expand...
Click to collapse
Before MiFlash try delete the Magisk module causing the bootloop, use TWRP File Manager. Magisk modules are located in /data/adb/modules
dhaern said:
Before MiFlash try delete the Magisk module causing the bootloop, use TWRP File Manager. Magisk modules are located in /data/adb/modules
Click to expand...
Click to collapse
Well that the thing I tried when I accidentally replaced my boot partition... And my phone was only booting on twrp or fastboot... also the weird thing I found is that /data/adb didn't exist
But many thanks to you all it works now.
I'll maybe try to make a guide on how to install Magisk on the Xiaomi EU weekly rom, as android 11 is only supported by the canary build. (if I manage to find a way to properly remove defective modules in TWRP :fingers-crossed
Boot twrp via Fastboot. Download Rom, Install ROM (xiaomi.eu). This should fix ist already. Then you could test a bit, and eventually need to wipe data
Tecardo said:
Boot twrp via Fastboot. Download Rom, Install ROM (xiaomi.eu). This should fix ist already. Then you could test a bit, and eventually need to wipe data
Click to expand...
Click to collapse
That was the first thing I tried, but only miflash managed to bring my phone back to life , as current twrp doesn't like encrypted data partition (I don't know why but it won't mount /data and it says wrong password)
I think that's why I couldn't remove the defective module
If you want everything to work you need to format data!!
Thats the point why using android 11 roms is hard, twrp cant decrypt it (until you flash rom with a10 and then a11 because partition is encrypted in a10 style)
Thelm76 said:
That was the first thing I tried, but only miflash managed to bring my phone back to life , as current twrp doesn't like encrypted data partition (I don't know why but it won't mount /data and it says wrong password)
I think that's why I couldn't remove the defective module
Click to expand...
Click to collapse
That's easy to fix, you installed Android 11 or? Don't use pin, use gesture. Twrp can't decrypt android 11 pin right now
Thelm76 said:
Hi!
I have a poco f2 pro that was on the xiaomi.eu MIUI weekly.
Yesterday I installed a module for Magisk and got into a bootloop. From now everything's fine I usually know how to deal with this kind of stuff.
The mistake I did, is when I tried to boot into a new TWRP after flashing.
I did
Code:
fastboot flash boot ./twrp_xxx.img
instead of
Code:
fastboot flash recovery ./twrp_xxx.img
I tried many times flashing different boot.img without success, I didn't managed to install "magisk manager for recovery" so I did a clean flash of the rom, and then I even tried downloading the stock global from from https://xiaomifirmwareupdater.com/ and did a "flashall" without success (the phone boots on bootloader/recovery).
Fortunately I havent yet locked the bootloader so I can still flash everything.
Can someone help me figure out why my phone is doing this even after flashing everything please?
Click to expand...
Click to collapse
NO flash only fastboot boot twrp.img