Related
Hi there
As you may know, if your SWC buttons are connected to the headunit through native canbus (the specific one to your car, with opened door info, aircon info, and so on), you can't remap them using de key study app (it's only for resistive SWC input).
Unfortunately my car has the up-down buttons replicating the left-right ones, so I have 4 buttons but only 2 functions. I would like to remap the up-down buttons to another function but I'm not pretty sure wich part of the firmware would I have to mod.
Does someone know if the canbus SWC codes are managed in mtccanbus.apk? Maybe mtcmanager.apk?
I searched in mtccanbus.apk but I only found code regarding parking radar, door info, aircon....
Thanks in advance.
Same here -> All the buttons are preconfigured and not changable.
mtce-utils can remap those buttons and the ones it can't, they may be mapped to native Android functions via Keylayout. (Try App Buttonmapper)
Xorit said:
Same here -> All the buttons are preconfigured and not changable.
mtce-utils can remap those buttons and the ones it can't, they may be mapped to native Android functions via Keylayout. (Try App Buttonmapper)
Click to expand...
Click to collapse
Hi Xorit
I gave mtcd-utils a try few months ago, but while you can assign new functions to buttons, the native one is still being executed.
Are you having this behaviour now?
Regards.
Pachis83 said:
Hi Xorit
I gave mtcd-utils a try few months ago, but while you can assign new functions to buttons, the native one is still being executed.
Are you having this behaviour now?
Regards.
Click to expand...
Click to collapse
I had two buttons which did the same and figured out, they were executing inbuild Android functions. (in-app menu, back-button).
Those can't be simply remapped by any tool, but altered via Android keylayout. Google it.
Android uses a keylayout similar to the Windows keyboard layout config.
Try executing "keyevent" (google!) via terminal emulator.
Is mtce-utils available on it's own (without custom ROM)? I haven't been able to find it anywhere... I'm running a stock ROM that I'm customizing to my needs (trying to keep temps down), but I'd like to check out mtce-utils...
Thank you!
Hey there,
are there any news to it? I‘m also looking for a solution
Xorit said:
I had two buttons which did the same and figured out, they were executing inbuild Android functions. (in-app menu, back-button).
Those can't be simply remapped by any tool, but altered via Android keylayout. Google it.
Android uses a keylayout similar to the Windows keyboard layout config.
Try executing "keyevent" (google!) via terminal emulator.
Click to expand...
Click to collapse
Thanks Xorit, I will try and let you know.
Regards.
Xorit said:
I had two buttons which did the same and figured out, they were executing inbuild Android functions. (in-app menu, back-button).
Those can't be simply remapped by any tool, but altered via Android keylayout. Google it.
Android uses a keylayout similar to the Windows keyboard layout config.
Try executing "keyevent" (google!) via terminal emulator.
Click to expand...
Click to collapse
Hi Xorit
I have been investigating about the key layout feature but I couldn't do the modification:
1-I found an app in the play store to show the keycodes of each key. I got the keycode for the can-bus keys.
2-I found some .kl files somewhere in Android firmware, but I don't know wich should I edit. I searched for the can-bus keycodes but none was found in the .kl files.
Maybe can-bus key press are managed by a native microntek app? Like mtcmanager or mtccanbus?.
Regards.
Install HAL9k latest software if you hve MTCD/E 8.0 unit. Or check out the headunits over at www.androidautoshop.com
All canbus keys can now be changed in Mod settings in Hals firmware
AndroidAutoShop said:
Install HAL9k latest software if you hve MTCD/E 8.0 unit. Or check out the headunits over at www.androidautoshop.com
All canbus keys can now be changed in Mod settings in Hals firmware
Click to expand...
Click to collapse
Great! I have H9k rom installed, but prior version 3.0. Didn't notice that 3.1 version includes canbus keys remapping.
Thanks for the info.
Pachis83 said:
Great! I have H9k rom installed, but prior version 3.0. Didn't notice that 3.1 version includes canbus keys remapping.
Thanks for the info.
Click to expand...
Click to collapse
Yeah it just came out We tried this on a volkswagen and a mercedes. and it was awsome to see it work just as we wanted.
AndroidAutoShop said:
Yeah it just came out We tried this on a volkswagen and a mercedes. and it was awsome to see it work just as we wanted.
Click to expand...
Click to collapse
O which mercedes did you tried on? (MY, Type)
rabenkind said:
O which mercedes did you tried on? (MY, Type)
Click to expand...
Click to collapse
We have tried it on several now.
GLK x204 2010
E class w211
GL W164
and one more that i cant remember, think it was a C class.
Works fine on c-class S203 / MY 2003
Is there any particularly good software to use to read out the button keycodes? I currently have a "dead" panel except for the AC-buttons, so only steering wheel keys are working as of now, and it's bugging me...
In Hal9K 3.1 you can activate an option somewhere (Mod Settings...) where it says "Show Key Codes when pressed" or something like that. It helps a lot.
AndroidAutoShop said:
We have tried it on several now.
GLK x204 2010
E class w211
GL W164
and one more that i cant remember, think it was a C class.
Click to expand...
Click to collapse
I have a W164 and i cannot remap the lingua buttons (the ones in the middle) to anything. Enabling the key code in Hal9k 3.1 ROM don't give any code.
Any idea ?
hblom said:
Is there any particularly good software to use to read out the button keycodes? I currently have a "dead" panel except for the AC-buttons, so only steering wheel keys are working as of now, and it's bugging me...
Click to expand...
Click to collapse
Less information.
What car and what Android Radio do you have exactly?
rabenkind said:
Less information.
What car and what Android Radio do you have exactly?
Click to expand...
Click to collapse
It's a Witson unit
MCU Version: MTCE_MX2_V2.92_1
And activating the ability to see the keycodes only shows keycodes from steering wheel buttons
hblom said:
It's a Witson unit
MCU Version: MTCE_MX2_V2.92_1
And activating the ability to see the keycodes only shows keycodes from steering wheel buttons
Click to expand...
Click to collapse
Then I guess you have a hardware problem.
Hi all,
Couldn't really find a good answer for this, so before I decompile the app myself I'd like to ask here. I've bought a USB TPMS set (Tire pressure monitoring system), and it works fine. However when I start the app the notification shade is in Chinese (although the app itself is in English). I also have to manually start the app each time I start my car.
Wasn't there a TPMS app in Malay ROM? Can't find it in the 3.2.1 release, so I installed the one that came with the TPMS on a USB stick. If so, can someone send it (if it's different)?
If not, anyone else interested in this? I can decompile the app and make my own one. I haven't tried the Store version, but I believe this is the one (I got the APK): https://play.google.com/store/apps/details?id=com.tpms3
M8 can you tell me what device you bought and is working to you and what radio you got with which rom?
Not sure if I can post here, but the Play Store app has an Amazon link in it. If you search for USB TPMS on AliExpress you will also find the gear you need.
It should work on any MTCD/E with Android 6 or 8 I believe.
Could you make it a plugin for Torque Pro? Ill be happy to buy it
Version for Android 9
Dhex- said:
Could you make it a plugin for Torque Pro? Ill be happy to buy it
Click to expand...
Click to collapse
Hi, I have the same TPMS and use the app that came with it and it works perfectly except for the annoying API compatibility screen on startup.
Are you able to recompile it to suit Android 9?
Thanks
Hi,
I have seen a canbus update firmware on the yandex site for download, I do not understand russian, but enough other languages except the russian, I would not know what it means and or what is it for an update and for which canbus adapter it meant? if you have the guts? and you do want to try it out? be my guess!
maybe you are lucky and your existing canbus adapter problems would be helped with this new update one.. is the question!
https://yadi.sk/d/umCvHqCDzHccr/CANBUS.UPDE
At Your Own Risk.. Mate!!
I have a spare canbus adapter.
I can try if I get in translated...
The included mp4 seems simple. I will try it...
edit:
I tried to update my Canbus but I get a fail message on my Mitsubishi Outlander canbus decoder 2014 (on decoder).
So nu luck...
dude-nl said:
I have a spare canbus adapter.
I can try if I get in translated...
The included mp4 seems simple. I will try it...
edit:
I tried to update my Canbus but I get a fail message on my Mitsubishi Outlander canbus decoder 2014 (on decoder).
So nu luck...
Click to expand...
Click to collapse
Hoi,
leef je nog joh? haha.
de eerste slachtoffer van dat neergestorte canbus vliegtuig is uit nederland.. kon niet laten joh.. haha.
Hi,
the first victim of that crashed canbus plane is from the netherlands.. could not resist dude. haha.
ps: as I say, that russ mate he didn't wrote any info about it or for which canbus it was made, so its very difficult to know thing without to read some info at least about it.. right?
Seicane-Misery said:
Hi,
I have seen a canbus update firmware on the yandex site for download, I do not understand russian, but enough other languages except the russian, I would not know what it means and or what is it for an update and for which canbus adapter it meant? if you have the guts? and you do want to try it out? be my guess!
maybe you are lucky and your existing canbus adapter problems would be helped with this new update one.. is the question!
https://yadi.sk/d/umCvHqCDzHccr/CANBUS.UPDE
At Your Own Risk.. Mate!!
Click to expand...
Click to collapse
According to what is written on 4PDA, the file CANBUS.UPDE on yadi.sk is for Toyota. Canbus manufacturer: "SIMPLE", customer version: 8 in factory settings.
maxbfg said:
According to what is written on 4PDA, the file CANBUS.UPDE on yadi.sk is for Toyota. Canbus manufacturer: "SIMPLE", customer version: 8 in factory settings.
Click to expand...
Click to collapse
Hi,
thanks for the explanation mate, everyone with Toyota canbus adapter -?- take your chance.
Is there any chance I can get firmware of canbus decoder from working one and apply it to another?
kmlnvm said:
Is there any chance I can get firmware of canbus decoder from working one and apply it to another?
Click to expand...
Click to collapse
why would you you like to do that ? it's too risky that you can brick yours with unknown models firmware. Also what would you expect to fix bu updating ?
julien_blanche said:
why would you you like to do that ? it's too risky that you can brick yours with unknown models firmware. Also what would you expect to fix bu updating ?
Click to expand...
Click to collapse
Because there's newer software version with new features and I know that inside electronics is the same, but I have no idea how to gather data from newer canbus box and transfer it to older one.
Here's a photo of the board, the chip is stm32 f072c8t6
is it came with the head unit or you purchased separately ? either way it is very hard to find a firmware for them.. even when you found there should be a special cable to connect computer to update along with the software.
Hi there,
my reversing chamber and steering wheel control no longer work.
can someone send me the software / firmware for the canbus for a Dasaita canbus Mazda CX-5
Hello, what did you manage to repair the canbus box, did you have to buy a new canbus
kmlnvm said:
Because there's newer software version with new features and I know that inside electronics is the same, but I have no idea how to gather data from newer canbus box and transfer it to older one.
Click to expand...
Click to collapse
Hello, what did you manage to repair the canbus box, did you have to buy a new canbus box, I did the same, that is, I tried to upload this canbus.upde file to my radio and my car lost communication with the radio
kmlnvm said:
Here's a photo of the board, the chip is stm32 f072c8t6
Click to expand...
Click to collapse
As you noted, this is a STM32 based chip, so to me this should be something you can solder some jumpers onto and copy the firmware and decompile using Ghidra or IDA...
From what I've seen these Canbus modules simply proxies the car's Canbus for the MCU and subsequently, Android. The problem is, if a Canbus message you want to receive, or need to receive is filtered by this proxy then you're out of luck. You'd have to do some sort of firmware modification to the Canbus module and whitelist that message.
willston said:
As you noted, this is a STM32 based chip, so to me this should be something you can solder some jumpers onto and copy the firmware and decompile using Ghidra or IDA...
From what I've seen these Canbus modules simply proxies the car's Canbus for the MCU and subsequently, Android. The problem is, if a Canbus message you want to receive, or need to receive is filtered by this proxy then you're out of luck. You'd have to do some sort of firmware modification to the Canbus module and whitelist that message.
Click to expand...
Click to collapse
does it mean that I have to buy a new cancus box for the radio to work properly again?
---------- Post added at 08:06 PM ---------- Previous post was at 08:00 PM ----------
DANGERde said:
Hi there,
my reversing chamber and steering wheel control no longer work.
can someone send me the software / firmware for the canbus for a Dasaita canbus Mazda CX-5
Click to expand...
Click to collapse
did you repair the canbus box? did you have to buy a new one?
and you have software for the canbus box Ford Focus mk3, 2014
willston said:
As you noted, this is a STM32 based chip, so to me this should be something you can solder some jumpers onto and copy the firmware and decompile using Ghidra or IDA...
From what I've seen these Canbus modules simply proxies the car's Canbus for the MCU and subsequently, Android. The problem is, if a Canbus message you want to receive, or need to receive is filtered by this proxy then you're out of luck. You'd have to do some sort of firmware modification to the Canbus module and whitelist that message.
Click to expand...
Click to collapse
and you have software for the canbus box Ford Focus mk3, 2014
I have a problem with my canbus on Fiat 500e (electric vehicle from USA). I buyed radio with canbus to Fiat 500 and not working correct. Menu in application is disabled, but show correct parameters.
Where I want tu buy a new canbus to my electric vehicle? Can I check it before send? Do you have sone links to sellers?
Hi all, I have this bugging issue with the all round 360 camera on screen display and text which should all be to the right of the screen and not on the left. I have an Australian nissan 2018 Qashqai Ti with the Dasaita PX6 head unit. There is no option in the menu system to rectify this problem other than the X - mirror function only. I have contacted Dasaita and it seems not big of a problem for them to rectify. Could it be the vehicles Canbus or canbus decoder which came with the head unit that's has messed up the graphics and text alignment?
Thank in advance.
sandpita said:
Hi all, I have this bugging issue with the all round 360 camera on screen display and text which should all be to the right of the screen and not on the left. I have an Australian nissan 2018 Qashqai Ti with the Dasaita PX6 head unit. There is no option in the menu system to rectify this problem other than the X - mirror function only. I have contacted Dasaita and it seems not big of a problem for them to rectify. Could it be the vehicles Canbus or canbus decoder which came with the head unit that's has messed up the graphics and text alignment?
Thank in advance.
Click to expand...
Click to collapse
Just an update, I have successfully edited the Auto Park file and realigned all the graphics accordingly. It was a self crash course in Android Studio and in the end it was so easy.
sandpita said:
Just an update, I have successfully edited the Auto Park file and realigned all the graphics accordingly. It was a self crash course in Android Studio and in the end it was so easy.
Click to expand...
Click to collapse
Hi,
can you say which canbus decoder you have installed? I have a 2016 Nissan xtrail T32 with the Dasaita PX6 head unit but cannot get the PA option for Park Assist which was available on the original factory head unit.
Thank you.
yugisop said:
Hi,
can you say which canbus decoder you have installed? I have a 2016 Nissan xtrail T32 with the Dasaita PX6 head unit but cannot get the PA option for Park Assist which was available on the original factory head unit.
Thank you.
Click to expand...
Click to collapse
Dasaita CB008 canbus.
It supports the factory 360 full camera and PA system (PA language only in English ), support BOSE amplifier , support original usb cable and steering wheel control.
Note: Make sure you have selected the right vehicle in the Canbus settings.
sandpita said:
Dasaita CB008 canbus.
It supports the factory 360 full camera and PA system (PA language only in English ), support BOSE amplifier , support original usb cable and steering wheel control.
Note: Make sure you have selected the right vehicle in the Canbus settings.
Click to expand...
Click to collapse
For example on my 2018 Qashqai, these are my Canbus settings.
sandpita said:
For example on my 2018 Qashqai, these are my Canbus settings.
Click to expand...
Click to collapse
Thanks, tried those but when I go into 360 mode with the camera I still DO NOT get the "PA" option on screen. Maybe there is something else missing. Have tried contacting Dasaita and they basically pointed me back to the same settings as you mentioned.
These are my factory harnesses below, one larger than the other however I have seen in some videos, other vehicles where the 2 that are actually connected are of similar width and the larger one not used. However while the Dasaita harness has 3 connectors (2 x 20 pin and 1 x 40 pin), my vehicle only has 2 - 1 wide (40 pin) and 1 small (20pin).
Maybe i'll have to go look for the old original unit to confirm if "PA" Park Assist was actually included in my model to confirm my memory.
Appreciate the feedback..
Hi @sandpita
Could you help as I have the same issue but on a ts10 on my nissan Qashqai RHD UK model.
iceze said:
Hi @sandpita
Could you help as I have the same issue but on a ts10 on my nissan Qashqai RHD UK model.
Click to expand...
Click to collapse
Hi mate, is your HU a MTCD , ie Px5,Px6?
No, it's a head unit of AliExpress from a company called Sinosmart.
I think it's a TS10 model head unit with a uis7862 processor.
But I've had a look at the overlay issue. Came to the conclusion it was the difference between LHD and RHD cars and how their 'Park assist' is shown.
My issue looks pretty identical to the YouTube video. I'll try and attach a picture.
I've found this apk and I've tried to use Android studio on it but can't get my head around it. I think it could possibly be the one that controls the OSD inpark assist?
@sandpita Could you check if possible that this would be the file? How could I go about editing it if so?
https://drive.google.com/file/d/1f7CiS-elC6_NwGXIS6VuDgulZXHDK32Q/view?usp=sharing
Thanks!
iceze said:
I've found this apk and I've tried to use Android studio on it but can't get my head around it. I think it could possibly be the one that controls the OSD inpark assist?
@sandpita Could you check if possible that this would be the file? How could I go about editing it if so?
https://drive.google.com/file/d/1f7CiS-elC6_NwGXIS6VuDgulZXHDK32Q/view?usp=sharing
Thanks!
Click to expand...
Click to collapse
That is the correct APK to edit, use APK Editor Studio to make changes in the layout/reverse.xml to move each graphic button to the right position.
Cheers mate. I've been trying the last few days but couldn't get my head around it.
I've used the Java decompilers website to decompile it and was trying to import the whole APK into android studio so I could change it in the GUI. Just couldnt get any gui up.
Will try this tonight!
Thank you
sandpita said:
That is the correct APK to edit, use APK Editor Studio to make changes in the layout/reverse.xml to move each graphic button to the right position.
Click to expand...
Click to collapse
Hi sandpita, is it possible to upload the apk file to show the correct OSD for the RHD? Thanks. BTW I have the same canbus as yours - CB008.
ymagro said:
Hi sandpita, is it possible to upload the apk file to show the correct OSD for the RHD? Thanks. BTW I have the same canbus as yours - CB008.
Click to expand...
Click to collapse
Make sure you make a backup of the original file, this version is for Android 10 and you must have root access.
Delete the original file and copy my file into it's folder. Reboot you headunit and the adjustment to RHD will be updated.
Hello everyone,
I recently bought an Android PX5 radio for my Peugeot 407 https://www.zonteck.com/products/Zo...*0_Peugeot_407_Car_DVD_Player_Multimedia.html
The radio has the MCU MTCH_MX2_V3.84_1 and I have several problems:
The first problem is that the radio does not have the APP of the Air Conditioning App AC (it simply does not have it and the seller does not clarify me why).
The second problem is that the automatic light switch does not work.
Can someone please help me?
Maybe an update?
Is it possible to get the AC App separately?
Can anyone tell me which manufacturer this radio is from? There is no doc or page with the manufacturer so that I can contact them...
Thank you very much for your help.
FRJAPE
Not Android auto, requested moderator move to [MTCD q&a]
marchnz said:
Not Android auto, requested moderator move to [MTCD q&a]
Click to expand...
Click to collapse
My apologies for posting in an inappropriate place, FRJAPE
Hello everyone,
All the problems with my radio have been solved…
After a Master on CANBUS I have configured the menu under password and all of a sudden everything worked.
Is there a directory where I can get Apps that work with my PX5?
My MCU is MCU MTCH_MX2_V3.84_1
Thank you very much for your help.
FRJAPE
FRJAPE said:
Hello everyone,
All the problems with my radio have been solved…
After a Master on CANBUS I have configured the menu under password and all of a sudden everything worked.
Is there a directory where I can get Apps that work with my PX5?
My MCU is MCU MTCH_MX2_V3.84_1
Thank you very much for your help.
FRJAPE
Click to expand...
Click to collapse
Google Playstore?!?
rigattoni said:
Google Playstore?!?
Click to expand...
Click to collapse
Painful isn't it
haha, how ingenious!
The truth is that I wasn't thinking about the standard Apps that you can find in the Playstore...
My question was oriented to locate specific Apps for these radios.
E.g., an App that reads the ambient temperature of the car and can see it in BIG DIGITS... not like now in the top bar in ARIAL 10... That is barely visible.
Thanks for your contributions.
FRJAPE