Hey guys,
I just found out how to access the working recovery on the Nokia 5.1 Plus.
Instructions:
1. Make sure USB debugging is enabled.
2. Run adb reboot recovery from your pc
3. When you see the android and the no command statement press power+volume up simultaneously.
5. Say hi to the recovery!
Hope this helps.
Sorry guys but pressing and holding power+volume up turned out to be useless; you need to run the command from a pc.
BurningGrip3 said:
Sorry guys but pressing and holding power+volume up turned out to be useless; you need to run the command from a pc.
Click to expand...
Click to collapse
I only connect the usb and get + vol and power until recovery starts, then press the volume and power times until you get the message
https://telegra.ph/Como-instalar-manualmente-las-actualizaciones-07-19
KRou705 said:
I only connect the usb and get + vol and power until recovery starts, then press the volume and power times until you get the message
https://telegra.ph/Como-instalar-manualmente-las-actualizaciones-07-19
Click to expand...
Click to collapse
I meant that trying not to run the command and pressing volume up+power with the device off will not work as it will not bring you the message.
Related
My phone Huawei Mate 7-L09 in Bootloop (Rescue Mode)
and i try to enter (fastboot&rescue mode )with vol down + power
or with vol down and connect phone to my laptop there is no respond and enter again to rescue mode.
so any one know how to solve this issue please
Thanks.
mandogannah said:
My phone Huawei Mate 7-L09 in Bootloop (Rescue Mode)
and i try to enter (fastboot&rescue mode )with vol down + power
or with vol down and connect phone to my laptop there is no respond and enter again to rescue mode.
so any one know how to solve this issue please
Thanks.
Click to expand...
Click to collapse
Try holding vol down and USB also try power and USB.
stinka318 said:
Try holding vol down and USB also try power and USB.
Click to expand...
Click to collapse
Thanks ,But still nothing
i try to hold Vol down and usb and also vol down + power
the same my devise still enter to rescue mode
mandogannah said:
Thanks ,But still nothing
i try to hold Vol down and usb and also vol down + power
the same my devise still enter to rescue mode
Click to expand...
Click to collapse
Have you tried fastboot&rescue reboot command prompt.....
Bring up command prompt windows on you computer then volume down and type fastboot&rescue reboot.
Or even just fastboot reboot
stinka318 said:
Have you tried fastboot&rescue reboot command prompt.....
Bring up command prompt windows on you computer then volume down and type fastboot&rescue reboot.
Or even just fastboot reboot
Click to expand...
Click to collapse
yes i tried ,But the problem that my pc doesn't detect my phone
mandogannah said:
yes i tried ,But the problem that my pc doesn't detect my phone
Click to expand...
Click to collapse
It is fastboot reboot prompt only open a prompt window and on the phone push power volume+ and- for 10 seconds in till it shuts down then power and volume - and type in fastboot reboot....
my phone doesn't turn off only when i push power for few seconds turn off then reboot again and vibrate before turning on again .
before vibrate i press vol down.
Before send my phone to huawei service i was enter fastooot& rescue mode after i bring it back i can't enter again.
stinka318 said:
It is fastboot reboot prompt only open a prompt window and on the phone push power volume+ and- for 10 seconds in till it shuts down then power and volume - and type in fastboot reboot....
Click to expand...
Click to collapse
i tried but still nothing it's go to normal boot to rescue mode
mandogannah said:
i tried but still nothing it's go to normal boot to rescue mode
Click to expand...
Click to collapse
OK if you wish send it back to service centre for repair it will cost you some cash to do this it is not a warrantable problem........
I have a micromax doodle 4 (Q391) with broken power and volume down buttons and its stuck in boot logo. So whenever I connect my phone to charger it will turn on and just keep showing the logo. However, I'm managed to enter recovery mode to reset device or wipe data BUT as I mentioned the power button is not working to select nor the volume button is working around to highlight options. Since its stuck in bootloop, I can't even enable usb debugging.
Btw, the battery can't be removed in this model. All I have is a reset button, volume up button and If i give some hard push on volume down its working sometimes. Some help would be very useful. Thank you.
After the vibration that you notice at the time you start your mobile you need to hold down the volume down button first (don't press both of them simultaneously) and then press and hold down the power button to boot into recovery menu.
Prateek(Patrick) said:
After the vibration that you notice at the time you start your mobile you need to hold down the volume down button first (don't press both of them simultaneously) and then press and hold down the power button to boot into recovery menu.
Click to expand...
Click to collapse
I have a broken power button but I'm able to boot into recovery in a different way. My question is "How to select options in recovery mode with power button not working?".
Visit a nearby micromax service center and get it repaired I don't own a micromax but I hope that the price for repairs are nominal.
How ??
pravinsundarajan said:
I have a micromax doodle 4 (Q391) with broken power and volume down buttons and its stuck in boot logo. So whenever I connect my phone to charger it will turn on and just keep showing the logo. However, I'm managed to enter recovery mode to reset device or wipe data BUT as I mentioned the power button is not working to select nor the volume button is working around to highlight options. Since its stuck in bootloop, I can't even enable usb debugging.
Btw, the battery can't be removed in this model. All I have is a reset button, volume up button and If i give some hard push on volume down its working sometimes. Some help would be very useful. Thank you.
Click to expand...
Click to collapse
how did you get it to recovery mode without the power button please !
Alex300202 said:
how did you get it to recovery mode without the power button please !
Click to expand...
Click to collapse
Probably by using the adb command below.
adb reboot recovery
Sent from my LGL84VL using Tapatalk
thank you
Droidriven said:
Probably by using the adb command below.
adb reboot recovery
Sent from my LGL84VL using Tapatalk
Click to expand...
Click to collapse
Thank you mate, I will try it and get back to you
I have searched and looked for alternatives on how to maybe enter download mode but have not found any solution. I have tried phone off then vol. down + bixby then plug in usb, also pow button + bixby + vol. down then plug usb but every time I do this all I get is a circle with a lightning logo with battery percentage. I also went into recovery mode and tried rebooting into bootloader however that just ends up rebooting back to the recovery menu. Please help. Thank you.
anyone with any tip on what might help or be the issue? I have an exynos version.
wbaez0320 said:
anyone with any tip on what might help or be the issue? I have an exynos version.
Click to expand...
Click to collapse
Hi, try to reboot into bootloader using ADB.
First off thank you for the response.
I tried that as well however maybe I did it wrong. Is it? adb reboot bootloader or adb reboot download
It's so strange you know cause I've tried so many different ways and I thought that rebooting to bootloader from recovery menu would definitely work however all it does is reboot back to my home screen.
Power off phone and just hold down pwr+vol up+ Bigsby for like 8ish seconds and it should boot to download.
Also adb/fastboot is a second route, read through this the below link. Make sure you have the Samsung drivers installed and adb/fastboot properly installed and prerequisites. https://www.theandroidsoul.com/unlock-bootloader-via-fastboot-android/
Or try to boot in safe mode
Hold power button when phone is on, then long press power off, and then select safe mode. https://www.verizonwireless.com/support/knowledge-base-223011/
wbaez0320 said:
I have searched and looked for alternatives on how to maybe enter download mode but have not found any solution. I have tried phone off then vol. down + bixby then plug in usb, also pow button + bixby + vol. down then plug usb but every time I do this all I get is a circle with a lightning logo with battery percentage. I also went into recovery mode and tried rebooting into bootloader however that just ends up rebooting back to the recovery menu. Please help. Thank you.
Click to expand...
Click to collapse
You have activated USB Debugging on Programer options?
yes USB debugging has been activated
NewWorldOrphan9 said:
Power off phone and just hold down pwr+vol up+ Bigsby for like 8ish seconds and it should boot to download.
Also adb/fastboot is a second route, read through this the below link. Make sure you have the Samsung drivers installed and adb/fastboot properly installed and prerequisites. https://www.theandroidsoul.com/unlock-bootloader-via-fastboot-android/
Or try to boot in safe mode
Hold power button when phone is on, then long press power off, and then select safe mode. https://www.verizonwireless.com/support/knowledge-base-223011/
Click to expand...
Click to collapse
well apparently I can't boot into safe mode either, while screen on I long pressed power button then long pressed power of for more then 10 secs but that doesn't do anything
crazy thing is I'm able to boot into recovery with no problem but that's about it. also adb does recognize my device as I can see the characters after inputting "adb devices"
Tried to boot into bootloader to unlock it but... download mode not appear
When i go to recovery and select "reboot bootloader " i have a blackscreen and need to reboot recovery with keys... trying lot of time but no way
Anyone can help?
SM-F916B XXU1ATHE
buying on samsung from France
mric034 said:
Tried to boot into bootloader to unlock it but... download mode not appear
When i go to recovery and select "reboot bootloader " i have a blackscreen and need to reboot recovery with keys... trying lot of time but no way
Anyone can help?
SM-F916B XXU1ATHE
buying on samsung from France
Click to expand...
Click to collapse
Reboot Phone in Download Mode: Connect USB-cable to your computer. Hold down "Volume up" and "Volume down" at same time. While holding down, connect the USB-cable to your phone.
> Connect the Galaxy Z Fold 2 to your PC/Laptop via a USB Type-C cable whilst the device is switched on
> Hold the power key and tap restart
> Once the phone begins to restart hold both Volume Up + Volume down together
> Press the Volume Up key on the next menu to enter download mode
Thanks for help guys. Another question, is anyone have root whith Magisk? I try but it don't work for me...
Holding Power and Volume doesn't seem to work and neither does just holding down.
I dont know the model of the phone and its functionalities but i suppose you have to turn it off, and then hold power + vol- or power + vol+
gabtit7 said:
I dont know the model of the phone and its functionalities but i suppose you have to turn it off, and then hold power + vol- or power + vol+
Click to expand...
Click to collapse
Volume Up puts it into recovery where it shows to wipe the cache or data, reboot, and turn off
Try power + vol- while powered off
If this still doesnt work then:
1) go to https://adb.clockworkmod.com/ and download the adb driver, put it in a folder you remember you are gonna need it.
2) open a command prompt
3) type cd (Here goes the full path to the folder with adb driver)
4) connect the phone to pc and type "adb reboot bootloader"
gabtit7 said:
Try power + vol- while powered off
Click to expand...
Click to collapse
It seems that it SHOULD go to the bootloader but it only just turns on the device just like how doing adb reboot bootloader does..
Is it possible that this device doesn't have a bootloader or something?
Oskii said:
Is it possible that this device doesn't have a bootloader or something?
Click to expand...
Click to collapse
OMG
Each computer ( Windows PC, Android phone, Apple Mac, etc.pp ) has a bootloader. That's the piece of software that initializes device's hardware components and then starts OS.