I flash it with Odin but still can't able to load recovery mode. It shows the "Installing system update" too but nothing happens and stuck in it. I can't able to use my device.
Related
Cannot boot into download or recovery mode
Hi, my samsung Tab2 is stuck at the "Firmware upgrade encountered an error" screen. No matter which combination of buttons I press, I cant get into download or recovery. I've tried flashing with Odin, it shows successful but nothing has changed. I tried the ADB command but it says "Waiting for device". When I plug in the tab to the charger (or when I connect it to the PC) it comes on automatically with the "Firmware upgrade encountered an error" screen. Is it a power button thing or is it something else ?
Thanks.
Sachin
Flash the CWM recovery via Odin, and restart. now you can go to the recovery mode and install ROM from sd card.
Dont try to flash any other recovery file, working with CWM only.
Hi,
Thanks for the reply. Unfortunately, I've already tried that, Odin shows it is successful but when i restart, nothing seems to have changed, the same upgrade error comes back.
sachin
I've been following somboons' guide to root. The first time my phone went into TWRP, I tried to root, but it gave an error saying device not found so I reboot the device. I tried it again, but this time, it's stuck on that screen. I can't even turn off the phone. Any help?
You can't get into recovery right? And.. You have flashed recovery?
Actually, I can enter fastboot. When i try to get into recovery mode, I get into a screen that says "Huawei eRecovery". There's a button that says "Download latest version and recovery", should I do that?
EDIT: Rebooted the system from eRecovery, everything's OK somehow.
Hello guys.
Like the title says, I can't boot directly into recovery mode after flashing twrp. I know the combination for booting into recovery mode but it automatically forces it to boot normally. I have to power off my phone after it starts normally to boot into recovery mode. But the problem is that the twrp disappears after it starts normally after the flash because u have to get instantly into the recovery mode (I think.) so it doesn't reset.
Modelnumber: SM-A510F
It worked at first, but there was also a problem with the recovery system because it always showed "No Command". I didn't use the latest version of odin and twrp. I only followed a guide with download links for this model. The odin flash succeded btw. I hope for some help here.
Thanks.
I'm on a G900W8 with the latest software update and I just tried to install the latest TWRP through Odin using download mode (vol up, home and power) and while it seemed like it worked it didn't actually and now I cannot get into download mode whatsoever. It just says "installing system update" which fails after a few seconds and sends me to "no command" screen.
If I hit vol up and power to get into the next menu it says
Code:
#fail to open recovery_cause(No such file or directory)#
#Reboot Recovery Cause is [UNKNOWN]#
No Support SINGLE-SKU
File-Based OTA
Supported API:3
# MANUAL MODE v1.0.0#
Successfully verified dmverity hash tree
E:Failed to clear BCB message: failed to find /misc partition
The phone boots and I can use adb commands to "apply update from ADB" in the recovery menu but I can't figure out how I can use this to fix anything. I have tried factory reset which worked but it did not fix my issue I still cannot access download mode or figure out any way to install TWRP or even get my regular recovery working again..
Does Odin still detect it when it reaches the no command screen? I had the same thing happen to a Samsung tablet but Odin still detected it after the 'installing system update' message and I was able to do a stock firmware flash.
Beanvee7 said:
Does Odin still detect it when it reaches the no command screen? I had the same thing happen to a Samsung tablet but Odin still detected it after the 'installing system update' message and I was able to do a stock firmware flash.
Click to expand...
Click to collapse
No it doesn't unfortunately my PC recognizes it but it says the device has malfunctioned and is not recognized. If I boot it up Odin will recognize it fine but I cannot install anything that way since the actual system is running at that point.
Try to find and flash popper combination rom
maybe this site help https://www.mobileheadlines.net/samsung-galaxy-s7-combination-rom/
I have same problem like you
I flash combination rom
lets its boot up
go do download mode again
and flash proper firmware
jaqjacek said:
Try to find and flash popper combination rom
maybe this site help https://www.mobileheadlines.net/samsung-galaxy-s7-combination-rom/
I have same problem like you
I flash combination rom
lets its boot up
go do download mode again
and flash proper firmware
Click to expand...
Click to collapse
OK but how do you flash that without being able to use Odin in download mode?
On my S7 to go to download mode is combination Vol Down + home + power.
Vol up is for recovery
jaqjacek said:
On my S7 to go to download mode is combination Vol Down + home + power.
Vol up is for recovery
Click to expand...
Click to collapse
Oh man I'm an idiot lol. I'll try this tonight... Thanks
Similar problm
Cordtus said:
I'm on a G900W8 with the latest software update and I just tried to install the latest TWRP through Odin using download mode (vol up, home and power) and while it seemed like it worked it didn't actually and now I cannot get into download mode whatsoever. It just says "installing system update" which fails after a few seconds and sends me to "no command" screen.
If I hit vol up and power to get into the next menu it says
Code:
#fail to open recovery_cause(No such file or directory)#
#Reboot Recovery Cause is [UNKNOWN]#
No Support SINGLE-SKU
Block-Based OTA
Supported API:3
# MANUAL MODE v1.0.0#
Similar problem but upto Block-based OTA showing ..
Click to expand...
Click to collapse
Similar problem but upto Block-based OTA showing i flashed stock formware after factory reset still showing above problem my device if galaxy j4 sm-j400f
And also when i boot it stuck on samsung logo for long time..
I tried to install a kernel on my G920I but it crashed on the boot screen with the message "kernel is not seandroid enforcing". The usual procedure to resolve would be to reinstall the original rom, but my device does not go into either download mode or recovery mode. No matter what key combination I use, it always goes back to the boot screen or load screen when I plug the cable into it.
Ps: Before bootloop the phone only went into download mode through JIG, but went into recovery mode normally. What to do?