Rooted and magisk installed on beta 9, is it possible to go back to most recent stable firmware with out downgrading first?
Just download stable version , place on root and update localy
Sent from my GM1910 using Tapatalk
Tried and installer said couldn't install because firmware is lower then installed ....but then oxygen updated wasn't granted root permission
I needed to use MSMTool... It was a pain in the arse... Check around XDA how to use this MSMTool, there are some tutorials around.
Edit: sorry, forgot to mention that it will downgrade and wipe all your data.
mholloway said:
Rooted and magisk installed on beta 9, is it possible to go back to most recent stable firmware with out downgrading first?
Click to expand...
Click to collapse
MSM tool to any version.
Related
Currently running stock ROM on an unlocked and rooted phone.
Magisk manager reports an update available.. can I just download and install this?
I've seem posts saying you need to reflash the entire ROM but wanted to double check.
Thanks
Bradden1 said:
Currently running stock ROM on an unlocked and rooted phone.
Magisk manager reports an update available.. can I just download and install this?
I've seem posts saying you need to reflash the entire ROM but wanted to double check.
Thanks
Click to expand...
Click to collapse
I downloaded the latest beta version, flashed it with TWRP and restarted. It booted and has been working just fine, didn't have to re-flash the ROM.
Bradden1 said:
Currently running stock ROM on an unlocked and rooted phone.
Magisk manager reports an update available.. can I just download and install this?
I've seem posts saying you need to reflash the entire ROM but wanted to double check.
Thanks
Click to expand...
Click to collapse
All it's doing is updating the manager itself, not magisk. You're fine and should have no problems.
Actually Both Magisk and the Manager have updates.
I updated both via the app.
No Issues, Safe to update.
Raylon00 said:
Actually Both Magisk and the Manager have updates.
I updated both via the app.
No Issues, Safe to update.
Click to expand...
Click to collapse
Thanks.. didn't want to bork my phone with the while a/b slots which are new to me.
Hello, I have a questions. How to install a new official update 9.0.2 from beta 6?
If I tried that, phone told me, that I have a newer version so it can not be installed.
DrzkaCZ said:
Hello, I have a questions. How to install a new official update 9.0.2 from beta 6?
If I tried that, phone told me, that I have a newer version so it can not be installed.
Click to expand...
Click to collapse
you temp boot twrp and flash in twrp.
I recently downgraded from OS beta 16 to OS 9.5.2. Now I want to upgrade to the latest one OS 10.3.3. i even downloaded the full version. but when trying to install it says failed.
Good evening mate,
well, in your case, you should just use the MSMTools. It's a software which we can use to install any version of the OOS, but obviously, each version flashes the build it was built for.
Just go to this thread: https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325/
thanks to @Some_Random_Username
There, you should see some spoiler buttons, just choose the one you want, download the software and then follow the instructions at the bottom of that post.
Remember, using this software LOCKS your bootloader and also WIPE everything on the device.
My advise is to choose GM57BA 10.3.2, and then just update to 10.3.3 by OTA.
sekk said:
Good evening mate,
well, in your case, you should just use the MSMTools. It's a software which we can use to install any version of the OOS, but obviously, each version flashes the build it was built for.
Just go to this thread: https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325/
thanks to @Some_Random_Username
There, you should see some spoiler buttons, just choose the one you want, download the software and then follow the instructions at the bottom of that post.
Remember, using this software LOCKS your bootloader and also WIPE everything on the device.
My advise is to choose GM57BA 10.3.2, and then just update to 10.3.3 by OTA.
Click to expand...
Click to collapse
Yes I tried using it yesterday but I stupidly updated to 9.5.8. But I have the same problem not getting any OTA updates. Now I will install 10.3.2. But is it guaranteed to get OTA since I dint get any when 9.5.8 was installed through MSMTools. Thank you
JNRao said:
Yes I tried using it yesterday but I stupidly updated to 9.5.8. But I have the same problem not getting any OTA updates. Now I will install 10.3.2. But is it guaranteed to get OTA since I dint get any when 9.5.8 was installed through MSMTools. Thank you
Click to expand...
Click to collapse
Yes, you should get every available OTA... But if you don't, just downlaod the app Oxygen Updater from play store, set it up nad use it to download the updates!
Hey guys!
I'm currently running the open beta 2 of OxygenOS11 and saw that the stable version just got released.
I usually use Oxygen Updater to get updates, but how do you switch from beta to stable?
Is a full reset needed?
Oxygen updater also doesn't show any updates (under the different options like full update, beta, incremental, etc), so not sure how to switch to stable in the first place...
There's a "revert to stock" zip data on the OnePlus Forum for the beta releases, this zip is the only one to get back to stable without any pc or something, you just have to install that zip (it will format data) that will bring you back to stable and from there you have to install the new Android 11 stable update. And no there is no way to keep data. You can make backup's, that's it
I just installed the Global OnePlus 8 11 Stable build from XDA over my OOS B2. Didn't bother with going back to stock. It did reset the device, but it worked just fine.
XDA article link: https://www.xda-developers.com/down...receive-stable-android-11-oxygenos-11-update/
Global Download link: http://otafsg1.h2os.com/patch/amazo....30_OTA_0300_all_2010031624_c5e68b42b3325.zip
Full disclosure: This is a T-Mobile device I had previously "converted" to Global.
PhoenixPath said:
I just installed the Global OnePlus 8 11 Stable build from XDA over my OOS B2. Didn't bother with going back to stock. It did reset the device, but it worked just fine.
XDA article link: https://www.xda-developers.com/down...receive-stable-android-11-oxygenos-11-update/
Global Download link: http://otafsg1.h2os.com/patch/amazo....30_OTA_0300_all_2010031624_c5e68b42b3325.zip
Full disclosure: This is a T-Mobile device I had previously "converted" to Global.
Click to expand...
Click to collapse
I used the "local upgrade" option and installed right over beta 2. I use magisk, flashed to inactive slot after that. Everything seems to be working just fine now
PhoenixPath said:
I just installed the Global OnePlus 8 11 Stable build from XDA over my OOS B2. Didn't bother with going back to stock. It did reset the device, but it worked just fine.
XDA article link: https://www.xda-developers.com/down...receive-stable-android-11-oxygenos-11-update/
Global Download link: http://otafsg1.h2os.com/patch/amazo....30_OTA_0300_all_2010031624_c5e68b42b3325.zip
Full disclosure: This is a T-Mobile device I had previously "converted" to Global.
Click to expand...
Click to collapse
By reset to you mean it won't wipe the data?
Bastienhere said:
By reset to you mean it won't wipe the data?
Click to expand...
Click to collapse
Yes it does wipe data going from ob2 to stable.. also I couldn't get magisk to work in inactive slot without flashing extracted boot.img again.. but works so all good
Hi,
I would like to know if anybody encountered this. This is my second time encountering this issue. I was on 12.0.4 and received a notification to perform update to 12.4.0. After downloading and rebooting, my twrp launched and after a few seconds instead of flashing, it went to the main menu page. After that, the phone just goes to fastboot mode and refused to boot. My phone has been rooted with magisk. Much appreciated for experts inputs.
The only way for me to boot my phone is to do a clean flash using mi flash tool and fallback to the old version...
Thank you.
spicediablo said:
Hi,
I would like to know if anybody encountered this. This is my second time encountering this issue. I was on 12.0.4 and received a notification to perform update to 12.4.0. After downloading and rebooting, my twrp launched and after a few seconds instead of flashing, it went to the main menu page. After that, the phone just goes to fastboot mode and refused to boot. My phone has been rooted with magisk. Much appreciated for experts inputs.
The only way for me to boot my phone is to do a clean flash using mi flash tool and fallback to the old version...
Thank you.
Click to expand...
Click to collapse
V12.0.4.0.QJKMIXM is a android 10 stable rom and V12.2.4.0.RJKMIXM is a android 11 stable beta rom which has many bugs.
V12.2.4.0.RJKEUXM is a stable rom that you can flash with miflash(but EEA not global).
After successfully going to v12.2.4.0, now I am finding that my current TWRP 3.4.1b unable to decrypt the phone thus not able to root it. I guess I have to fall back to 12.0.4.0 to be safe... I was tempted to go to 12.2.4.0 due to android 11 but looks like it's too problematic now due to beta. I was actually wondering why beta was pushed to me.
NOSS8 said:
V12.0.4.0.QJKMIXM is a android 10 stable rom and V12.2.4.0.RJKMIXM is a android 11 stable beta rom which has many bugs.
V12.2.4.0.RJKEUXM is a stable rom that you can flash with miflash(but EEA not global).
Click to expand...
Click to collapse
"I was actually wondering why beta was pushed to me "
You are not the only one, many users have reported this problem to XDA and c.mi.com
Try xiaomi.eu_multi_HMK30Pro_V12.2.2.0.RJKCNXM_v12-11 better than stock and on android 11.
spicediablo said:
After successfully going to v12.2.4.0, now I am finding that my current TWRP 3.4.1b unable to decrypt the phone thus not able to root it. I guess I have to fall back to 12.0.4.0 to be safe... I was tempted to go to 12.2.4.0 due to android 11 but looks like it's too problematic now due to beta. I was actually wondering why beta was pushed to me.
Click to expand...
Click to collapse
Now it is a stable rom https://xiaomifirmwareupdater.com/miui/lmi/stable/V12.2.4.0.RJKMIXM/
seems to be the same
Try flashing stock recovery before performing ota update. Flashing ota via twrp cause /storage inaccessible for me.
Thanks, so you updated with stock recovery without issues but are you able to flash twrp with the updated rom?
kopter36 said:
Try flashing stock recovery before performing ota update. Flashing ota via twrp cause /storage inaccessible for me.
Click to expand...
Click to collapse
NOSS8 said:
"I was actually wondering why beta was pushed to me "
You are not the only one, many users have reported this problem to XDA and c.mi.com
Try xiaomi.eu_multi_HMK30Pro_V12.2.2.0.RJKCNXM_v12-11 better than stock and on android 11.
Click to expand...
Click to collapse
Is that the most stable android 10 based on miui? I'm thinking about downgrading to many android 11 bugs on 12.2.4.0 global
Latin_lion_ said:
Is that the most stable android 10 based on miui? I'm thinking about downgrading to many android 11 bugs on 12.2.4.0 global
Click to expand...
Click to collapse
This is not a stock ROM and it is a android 11.
spicediablo said:
Thanks, so you updated with stock recovery without issues but are you able to flash twrp with the updated rom?
Click to expand...
Click to collapse
Yes i am able to successfully flashed twrp via fastboot afterward and directly proceed to root using magisk.
Everything works as usual, except, for me atleast, twrp now require pattern-type (3x3 dot) as password for decryption. Pin or character doesnt works.
Deleted.
To solve update problem you need to Rollback to stable stock rom, I used this:
Code:
lmi_global_images_V12.2.4.0.RJKMIXM_20201228.0000.00_11.0_global
extracted it.
then used mi flash from this toolkit:
Code:
mi-globe.com_Xiaomi_MiFlash_Pro_EN_5.3.1104.39.exe
sorry, but I cant provide links to downloads.
Moribus said:
To solve update problem you need to Rollback to stable stock rom, I used this:
Code:
lmi_global_images_V12.2.4.0.RJKMIXM_20201228.0000.00_11.0_global
extracted it.
then used mi flash from this toolkit:
Code:
mi-globe.com_Xiaomi_MiFlash_Pro_EN_5.3.1104.39.exe
sorry, but I cant provide links to downloads.
Click to expand...
Click to collapse
This is nothing new. With the bootloader unlock you can flash any version of stock rom with miflash.
kopter36 said:
Yes i am able to successfully flashed twrp via fastboot afterward and directly proceed to root using magisk.
Everything works as usual, except, for me atleast, twrp now require pattern-type (3x3 dot) as password for decryption. Pin or character doesnt works.
Click to expand...
Click to collapse
Successfully updated to 12.2.4.0. However, my nova launcher has been 'uninstalled' after this upgrade and I am unable to reinstall it with install fail error coming up. I am installing from apk. Anybody has this issue?