Hi, i bought a dasaita px6 max6 for toyota rav4 2019, once the dasaita is connected, the front camera does not work.
I tried to connect the dasaita via fcam rca connector and i tested che cam by the fcam apps but nothing, only show black screen.
Can someone help me?
What does the reseller or installer suggest when contacted for support?
Connect the camera power wire to f cam power in the HU
Have you enabled the front camera in the Factory Settings? It's under the "Other" tab
Have you solved? I have same problem.
I also have the same problem. The front camera was working for a bit but now it doesn't even power up, no leds on it at all. Odd!
hello, i’m having the same issue, anyone managed to make their birds eye view work with this HU?
dragrazer said:
hello, i’m having the same issue, anyone managed to make their birds eye view work with this HU?
Click to expand...
Click to collapse
I have 3 cams (front, rear, and dash) on my Dasaita px6 and they all work fine.
Make sure your cam has 12 volts on its power line and a good ground.
Related
I looking at getting a PX5 unit and was wondering if any of the DVR apps supported recording the rear camera as well as from the USB dash camera? Would be nice to have both going at once. Also is the video out mirrored only or is it possible to set something else on the output screen.
The front (F-Cam) and rear (Reverse) cameras are both RCA (analog) and are not recordable since the signal is only displayed and not processed logically. The DVR software works ONLY with certain USB cameras, and you could place them anywhere in your vehicle you please. So far, no other DVR software (available in the Play Store, anyway) is compatible with these units. Sorry I can't help with the video mirroring question.
Even though both are analog when you run the non F-Cam (DVR) cam (which frustratingly is not compatible with the f-cam app) I have found it makes the rear cam footage stutter!!. Bit crap when reversing as a stutter can skip a few inches.
Hi Guys, I have a quick question. I was very excited to setup my front bumper camere using F-Cam app which I figure it out while i was messing with Car-126 menu. However due that my unit has only AV input rca, I am not able to get any view with F-Cam app. As far as I investigate, hardware mod is needed to use F-Cam app with front camera. It seems very hard for me, so I want to go with AVIN.apk.
It sometimes works well, sometimes error logo on middle of screen. Is AVIN.apk buggy? Also it drives me crazy that it cuts my spotify's sound when I open AVIN.apk. Is there any possibility to keep audio running in background and show only video in full screen with AVIN?
My unit is a Witson brand PX5 - Oreo 4GB.
I found a similar thread, but it keeps audio instead of video Are there any apks other than native one to use video input of head unit?
https://forum.xda-developers.com/an...-development/help-avin-app-auxiliary-t3466211 (not mtce)
I guess I am the only one who wants to use AVIN app only for camera input then.. interesting.
Where did you find the av-in app?
joeyz400 said:
Where did you find the av-in app?
Click to expand...
Click to collapse
It is pre-loaded with stock rom already. My unit is android 8.0 px5.
I connect front camera to av-in input of unit, it works but i hate it is taking control of audio.
It is trying to play aux in with video input.
Check all connections on the back. Seriously. You probably have a pin that’s either unlabelled or unused that is really f-cam in. All units should be capable of it, and in a rare case you might have to do some soldering.
Edit: I have a Witson unit as well and it’s the 6th pin on the little 8 pin connector. Pin 3 is GND on mine.
Hi there,
I use an xtrons PE98MTVPL with android 8 stock rom in my Volkswagen Passat B7 from 2014. It all works fine except the volume is not decreased when I activate the PDC by only pushing the button. When I drive backwards the rear view camera ist activated and the PDC also and the volume gets low. But when I drive forward the volume is set back to normal so I can't hear my front PDC. Is there a possibility to use the can bus signal for PDC activated or something else to lower the volume?
Thanks a lot in advance.
Jan
Hmm no One?
Damn I really hoped anyone could help. But I see that no one of those who read this post is willing...
Push
Bump!
Hello everyone.
I have a PX6 car stereo.
I would need your help to set the open and close button for the 7 inch display of my car stereo.
There is no "display" icon in the button settings.
I have the dmcu.cfg file in which this setting is missing.
Does anyone have the original file?
Is there a way to configure the dmcu.cfg file from the PC?
I attach some photos for those who want to help me.
Thank you.
I have the same problem, same android head unit . Android 9, MTCE_LM, after firmware update, the retractable display doesn t work anymore . Do you solve the problem ?
What does the seller suggest when contacted for support? Does that work, what was tried?
hello i have a head unit with Rockchip 3326 px30 and my front parking sensor are not displayed
the rear sensors are working (i see them on the screen) but I don't get the beeping noise
what do you think ?
many thanks for your help
Olivier