Palm PVG100 OTG earphones - General Questions and Answers

Hi
I want to know if you can have your earphones work on the palm pvg100 via OTG.
thanks

pmko1917 said:
Hi
I want to know if you can have your earphones work on the palm pvg100 via OTG.
thanks
Click to expand...
Click to collapse
Good news!!! YES! Everything OTG works great! The palm comes with OTG enabled out-of-the-box. I'd recommend just using bluetooth headphones though- much more convenient.

hardbodyrichert said:
Good news!!! YES! Everything OTG works great! The palm comes with OTG enabled out-of-the-box. I'd recommend just using bluetooth headphones though- much more convenient.
Click to expand...
Click to collapse
I just use it via an adapter and it works?

louis2020 said:
no please
---------- Post added at 01:35 PM ---------- Previous post was at 01:34 PM ----------
bdbvdf
Click to expand...
Click to collapse
???

Related

[Q] Galaxy tab OTG 5 +1 in 1 connector

Hi all,
Has anyone tried the above connector on the Note 10.1? Mine does not seem to work at all. Restarted tab, and turned on USB debugging.
Thanks, Vince
Link or pic?
Sent from my GT-N8013 using xda app-developers app
methaq said:
Link or pic?
Click to expand...
Click to collapse
Hi,
Can't post the link but here is a pic
I bought it from wantitall (online shop) in South Africa in a bundle called:
DigitalsOnDemand ® 14-Item Accessory Bundle for Samsung Galaxy Note 10.1 16GB 32GB
which specifies it is compatible with the Note 10.1
Perhaps it only works with older tabs?
I have that one too. It did not work at all, either.
Until today's update. It works perfectly now.
---------- Post added at 04:21 PM ---------- Previous post was at 03:56 PM ----------
BTW, a valuable piece of information: there is a switch on the right. You can only access either USB or SD cards and need to flick the switch. Might not be obvious. Wasn't to me for a while anyway
Hi, I have this connector for my N8000. It works fine only with an usb pen or a memory card.
Instead I can't use it, via usb, with external hard disk or another smartphone like my N7000.
Probably the port of the 10.1 has low amperage and can't accept high energy devices.
makanimike said:
I have that one too. It did not work at all, either.
Until today's update. It works perfectly now.
---------- Post added at 04:21 PM ---------- Previous post was at 03:56 PM ----------
BTW, a valuable piece of information: there is a switch on the right. You can only access either USB or SD cards and need to flick the switch. Might not be obvious. Wasn't to me for a while anyway
Click to expand...
Click to collapse
Saw the switch Thanks for the update info, very interesting. Update not yet available for me in South Africa though, but glad to see that a fix is available soon.
Vince

Beware Typo Doesnt work for our Device

Typo, doesn't work for our device, follow the link in Racings post. It states that the company made a mistake and this Does Not Work. http://www.discountcell.com/cellular/pn/samsung_10824nz
i didn't think our devices had the ability to video out?
Cleanup in aisle 4
Won't believe it till someone tries it lol. Cause all the devs said video out is a no go lol
Sent from my MystUL using xda premium
to my knowledge video out is a no go on the blaze
Racing19969 said:
to my knowledge video out is a no go on the blaze
Click to expand...
Click to collapse
That's what I thought to but this makes a conversion to make it possible. Says its for the blaze
jbats said:
That's what I thought to but this makes a conversion to make it possible. Says its for the blaze
Click to expand...
Click to collapse
so are you going to get one to verify it actually works
Racing19969 said:
so are you going to get one to verify it actually works
Click to expand...
Click to collapse
No not at the moment.lol I don't need nor have a use for one right now. Nor was I trying to mislead anybody but I have seen adapters in other cases work on different devices.
If anybody gets one, let us know if it works. If it don't, don't blame me. Just seen something worth mentioning.
With dvi support , the blaze is capable of HDMI dependent on hdcp support. Both can be converted both ways. Maybe since its a audio out jack, it exploits the digital part. HDMI video and audio are digital streams so idk but its worth a shot.
I'm out right now but when I get home tonight I'll look into it
Definitely a NO GO !!!! See the post here!!
http://androidforums.com/samsung-galaxy-s-blaze-4g/564418-blaze-4g-tv-out-options.html
---------- Post added at 09:27 PM ---------- Previous post was at 09:24 PM ----------
also worth a mention, HDMI issues are what is stopping us with the new kernel... Other similar samsung phones have the support for it but the Blaze does not..
Racing19969 said:
Definitely a NO GO !!!! See the post here!!
http://androidforums.com/samsung-galaxy-s-blaze-4g/564418-blaze-4g-tv-out-options.html
---------- Post added at 09:27 PM ---------- Previous post was at 09:24 PM ----------
also worth a mention, HDMI issues are what is stopping us with the new kernel... Other similar samsung phones have the support for it but the Blaze does not..
Click to expand...
Click to collapse
Yeah I found that out the other night from Uber about the lack of HDMI... Sucks cause it does have DVI which with the proper support can be converted to HDMI and vice versa but when the flags are flipped for both it breaks the kernel. We need some kernel sauce maybe possibly even from the new t989 update :fingers-crossed: . But I doubt it, unless Tmo comes out with something for us we might be up shh creek. It would take Major Hacking to the source to implement are device the way it sits.
Thx for clearing up the Adapter thing, but again I have seen crazier:silly:

Oneplus + radio car

I can connect with media in of my golf vw to the oneplus one.
I can hear mp3 for some minutes but after the oneplus one disconnect to radio.. And I have to reconnect it... What I can do for a continuous hearing?
All with USB and not Bluetooth
dna88 said:
I can connect with media in of my golf vw to the oneplus one.
I can hear mp3 for some minutes but after the oneplus one disconnect to radio.. And I have to reconnect it... What I can do for a continuous hearing?
Click to expand...
Click to collapse
Sorry to hear this. Mine works perfectly with my 2009 Mazda 6. Never disconnected.
Have you try to delete the pairing and start again ?
dcoulombe said:
Sorry to hear this. Mine works perfectly with my 2009 Mazda 6. Never disconnected.
Have you try to delete the pairing and start again ?
Click to expand...
Click to collapse
With USB port? I don't have Bluetooth pack
dna88 said:
With USB port? I don't have Bluetooth pack
Click to expand...
Click to collapse
With bluetooth.
Edit: yeah, I didn't read your post correctly...
Can be a problem of Cm11s?
What year is your golf? And what bluetooth module and radio do you have? My gti is a 2010 and updated my Bluetooth module to a 9w7 from a 9w3. I have the RNS-510 navigation (big screen). I know some people have issues with the non touch screen radios and Bluetooth.
---------- Post added at 09:51 AM ---------- Previous post was at 09:48 AM ----------
cundiffr said:
What year is your golf? And what bluetooth module and radio do you have? My gti is a 2010 and updated my Bluetooth module to a 9w7 from a 9w3. I have the RNS-510 navigation (big screen). I know some people have issues with the non touch screen radios and Bluetooth.
Click to expand...
Click to collapse
Sorry I didn't see that you were using the MDI cable
Yeah, media in cable and rcd 310 here. No Bluetooth module... Too much expensive...
With Samsung s2 all ok... With USB hard drive all ok..
cundiffr said:
What year is your golf? And what bluetooth module and radio do you have? My gti is a 2010 and updated my Bluetooth module to a 9w7 from a 9w3. I have the RNS-510 navigation (big screen). I know some people have issues with the non touch screen radios and Bluetooth.
---------- Post added at 09:51 AM ---------- Previous post was at 09:48 AM ----------
Sorry I didn't see that you were using the MDI cable
Click to expand...
Click to collapse
Up! No one have the same problem?

Has anyone tried using OPO with BMW idrive?

Wanted to know whether anyone has any experience with this setup:
OPO via bluetooth to BMW
OPO via usb cable to BMW
Any successes? Bugs?
Further info for BMW owners - 2014 F30 with NBT
Thanks!
I dont have a NBT in my BMW E60 2009.But i use the opo with the sound cable and the sound is sweet!
dragoi90 said:
I dont have a NBT in my BMW E60 2009.But i use the opo with the sound cable and the sound is sweet!
Click to expand...
Click to collapse
what do you mean by "sound cable"? the headphones plug?
Yeah that's right!Sorry that i didn't specify!
I've been using it via bluetooth, works fine for me
nickjwall said:
I've been using it via bluetooth, works fine for me
Click to expand...
Click to collapse
Ok thanks!!
My OPO (38R) don't work with connected drive. I can go to the internet but BMW online don't work (the request page not found).
It's don't work with LTE but it work if my OPO have and WIFI connection... I try with another rom (slim kat and CM11) and I have the same issues.
BMW online work very nice with my SIII with HDSPA connection.
Only BMW online doesn't work, I can play music in bluetooth, phone with the car and go to the internet.
Mine paired in my e90 non-idrive via bluetooth. Just had to erase my old phone.
Hey does music work through iDrive, with a bluetooth paired OPO ?
---------- Post added at 11:44 PM ---------- Previous post was at 11:43 PM ----------
nickjwall said:
I've been using it via bluetooth, works fine for me
Click to expand...
Click to collapse
Hey does music work with a bluetooth paired OPO ?

What Bluetooth codecs does it support?

Apparently the Pixel doesn't support AptX, which is a shame. Does that mean it only connects to wireless headphones using the poor SBC?
it should support AptX, but I just tried using my own headphones and it did not work. it only connected as SBC.
---------- Post added at 09:49 PM ---------- Previous post was at 09:47 PM ----------
solidd_swa said:
it should support AptX, but I just tried using my own headphones and it did not work. it only connected as SBC.
Click to expand...
Click to collapse
I am talking about Android 8 btw. it has the codecs, but it still won't connect to my headphones

Categories

Resources