Database Info

Relock the bootloader

So many people are finding the correct way to lock bootloader so i created this thread.Just firstly be sure that you have downloaded the correct stock rom/firmware for your device otherwise you will be complaining for no wifi and network issue.Just follow this steps and you will successfully relock your bootloader.If any issues just reply i will help.I used fasboot so you can just replace it by mfastboot if you use mfast.Your warranty is still void after relocking,now its your luck if the service center guys check it or not!
1.Download the stock rom/firmware of your device.
2.Extract it and paste its contents in the adb folder.
3.Make sure that usb debugging is on.
4.Now in the adb folder shift+right click and then in the pop click open command window here.
5.Type in the cmd [adb reboot bootloader],you can do this manually also by power down first then power button+volume down.
6.Type [fastboot oem lock begin] it would then say flash stock images etc.
7.Then enter this commands and make sure you get okay after each command or you can just run the bat file uploaded(do put it in the adb folder)
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem lock
fastboot reboot
8.Now your device will reboot with no bootloader unlock warning.

see this

i followed ur method but :crying::crying::crying:

samiran das 03 said:
i followed ur method but :crying::crying::crying:
Click to expand...
Click to collapse
If You Use XT1643 So Check This = http://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1643-updated-signed-t3460695

samiran das 03 said:
i followed ur method but :crying::crying::crying:
Click to expand...
Click to collapse
The problem with you is that you have flashed the old version of rom.Download the latest version of your phone rom.This error is caused when for eg. You currently have a rom version 2.0 ,and then try to flash rom 1.0.The bootloader gives an error.So you have to flash version 2.0.And the error imaged.not signed or corrupt is normal.

anhoxhrs said:
The problem with you is that you have flashed the old version of rom.Download the latest version of your phone rom.This error is caused when for eg. You currently have a rom version 2.0 ,and then try to flash rom 1.0.The bootloader gives an error.So you have to flash version 2.0.And the error imaged.not signed or corrupt is normal.
Click to expand...
Click to collapse
so what should i do now
plzz post the latest firmware

samiran das 03 said:
so what should i do now
plzz post the latest firmware
Click to expand...
Click to collapse
Send me screen shot of about phone

Plzz Check

Anything more u want???

samiran das 03 said:
Anything more u want???
Click to expand...
Click to collapse
Flash this https://drive.google.com/file/d/0B1N6dGU7FEXsSjR3QUtsRU1RTVk/viewAnd lock the bootloader with steps on the 1 post.

I tried using this firmware but its giving me same error.others are telling that the firmware which i am flasshing is old one.

But @swarupgolui told me to flash the lastest firmware
See this below

So what to do now?

samiran das 03 said:
So what to do now?
Click to expand...
Click to collapse
Whats Your Problem With lastest firmware?

swarupgolui said:
Whats Your Problem With lastest firmware?
Click to expand...
Click to collapse
Not done yet
I will do it tomorrow

samiran das 03 said:
So what to do now?
Click to expand...
Click to collapse
You tried the firmware in the link i gave?

anhoxhrs said:
You tried the firmware in the link i gave?
Click to expand...
Click to collapse
But in that my device is not mentioned

samiran das 03 said:
But in that my device is not mentioned
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B1N6dGU7FEXsSjR3QUtsRU1RTVk/view Just download this on chrome on your pc and flash.

Sure it will work na
---------- Post added at 05:20 PM ---------- Previous post was at 05:06 PM ----------
Mine is xt1643

samiran das 03 said:
Sure it will work na
---------- Post added at 05:20 PM ---------- Previous post was at 05:06 PM ----------
Mine is xt1643
Click to expand...
Click to collapse
It worked on mine i have same xt1643 32 gb

[ROM] Nougat Factory images 7.0_NPJS25.93-14-8

Stock ROM for Moto G4/G4 Plus NPJS25.93-14-8
Installing this Stock ROM will unroot your device and remove any custom Recovery.
If you device is soft bricked or facing bootloop issue or experience lags, then you should download and Flash this ROM.
This is the latest Stock Firmware of Moto G4 and Moto G4 Plus.
Build - NPJS25.93-14-8
This build will update your Bootloader. If you try to downgrade it for any reason, you may brick your device.
This process can take roughly 20-30 minutes so please be patient.
This Flashable zip can install over any previous version including Soak ROM or MM or Custom ROM.
As you already know, you Don't have to unlock your bootloader.
Prerequisites:
RSDLite 6.2.4
Firmware 7.0_NPJS25.93-14-8 [Thanks to AFH and uploaders]
Procedure 1:
♦ Download the application RSDLite and install it.
♦ Download and unpack the firmware from rar.
♦ Run RSDLite.
♦ Click on the button with three dots and select flashall.xml.
♦ Reboot your phone into fastboot mode [press the volume down + power button]
♦ Connect your phone to a PC. The program should detect the phone.
♦ Press the Start button and wait until the end of the firmware until the phone restarts.
Procedure 2:
You can also use fastboot commands if you prefer it.
♦ Download ADB and fastboot driver for your PC/MAC
♦ Download and install Drivers for your Moto G4/G4 Plus
♦ Download ROM
♦ Now Power Off your phone and boot into Bootloader mode [Press and Hold "Power + Volume Down"]
♦ Use the below commands one by one. [If you are using mfastboot then type 'mfastboot' instead of 'fastboot']
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
If you want to lock your Bootloader use the below lines.
Code:
fastboot oem fb_mode_set
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem lock
fastboot oem fb_mode_clear
fastboot reboot
or use the batch from attachment
You MUST take backup of your important data. I am NOT responsible for data loss or bricked device
Tested on my XT1643.

are you sure it works??

[email protected]$hil said:
are you sure it works??
Click to expand...
Click to collapse
it must have to. btw it worked for me

arunzone said:
it must have to. btw it worked for me
Click to expand...
Click to collapse
the firmware download link does not work.. it says something went wrong

[email protected]$hil said:
the firmware download link does not work.. it says something went wrong
Click to expand...
Click to collapse
check now. the link has been updated.

[email protected]$hil said:
the firmware download link does not work.. it says something went wrong
Click to expand...
Click to collapse
Translate the web page and sign in using google or telegram account.... it worked to download from there.... haven't installed tho...

arunzone said:
check now. the link has been updated.
Click to expand...
Click to collapse
Thnx now downloading

It works perfectly. I was able to flash lastest Nougat update over 1st Soak Test. It's completely not necessary to downgrade to MM and unlock bootloader.

How is this working???
Between 1st soak and final OTA, 2 more soak test builds came i heard. How is this process working for you. please help explain!!!

arunzone said:
Many of us has already installed the first soak test and now have problems while update to latest version. This tutorial is for those who don't want to unlock their bootloader.
This process can take roughly 20-30 minutes so please be patient.
This Flashable zip can install over Soak Test ROM or MM.
You Don't have to unlock your bootloader or downgrade to MM and data will not be deleted.
Prerequisties:
RDSLite
Firmware
Procedure:
Download the program and install.
Download and unpack the firmware.
Run the program.
Click on the button with three dots and select flashall.xml.
Reboot your phone into fastboot mode [press the volume down + power button]
Connect your phone to a PC. The program should detect the phone.
Press the Start button and wait until the end of the firmware until the phone restarts.
As a precaution, enable OEM Unlocking under developer options. If anything goes wrong you can still unlock your bootloader and install custom firmware.
Also take backup of your important data.
I am not responsible if you brick your device.
Tested on my XT1643 with unlocked bootloader with soak 1.
Click to expand...
Click to collapse
Will it work with Windows XP? Also please mention required drivers & if possible link to download drivers.

arunzone said:
Many of us has already installed the first soak test and now have problems while update to latest version. This tutorial is for those who don't want to unlock their bootloader.
This process can take roughly 20-30 minutes so please be patient.
This Flashable zip can install over Soak Test ROM or MM.
You Don't have to unlock your bootloader or downgrade to MM and data will not be deleted.
Prerequisties:
RDSLite
Firmware.
Click to expand...
Click to collapse
Does this Firmware support VoLTE?
Sent from my XT1562 using Tapatalk

Worked perfectly with modified system on first soaktest and twrp Recovery, so no need to delect them before. After flashing the updated firmware, the system is clean and Stock Recovery is back. :good:

kumeipark said:
Does this Firmware support VoLTE?
Click to expand...
Click to collapse
Yes it supports volte feature.

praveenbda said:
Will it work with Windows XP? Also please mention required drivers & if possible link to download drivers.
Click to expand...
Click to collapse
Yes. Please install drivers from Motorola website or from below link.
https://forum.xda-developers.com/showthread.php?t=2588979

rishisharma1986 said:
Between 1st soak and final OTA, 2 more soak test builds came i heard. How is this process working for you. please help explain!!!
Click to expand...
Click to collapse
Since this this is flashable, it doesn't look for what your Mobile already has. It will just install the rom. Even if you are not on official rom.

arunzone said:
Since this this is flashable, it doesn't look for what your Mobile already has. It will just install the rom. Even if you are not on official rom.
Click to expand...
Click to collapse
Will this clear all my data or just installs like ota ?

sam sundar said:
Will this clear all my data or just installs like ota ?
Click to expand...
Click to collapse
It won't delete your data. Just take a backup as a failsafe.

arunzone said:
it must have to. btw it worked for me
Click to expand...
Click to collapse
How to download the firmware frm the file given they r saying some dfrnt language
---------- Post added at 05:16 AM ---------- Previous post was at 05:10 AM ----------
arc4d14n said:
Translate the web page and sign in using google or telegram account.... it worked to download from there.... haven't installed tho...
Click to expand...
Click to collapse
Bro how to translatethe webpage

gokulkishor said:
How to download the firmware frm the file given they r saying some dfrnt language
---------- Post added at 05:16 AM ---------- Previous post was at 05:10 AM ----------
Bro how to translatethe webpage
Click to expand...
Click to collapse
Open the link in chrome and it ask to translate. That page contains only one button in the center of the page. Click it. A dialog box will appear, tick the check box and click on enabled button.

gokulkishor said:
How to download the firmware frm the file given they r saying some dfrnt language
---------- Post added at 05:16 AM ---------- Previous post was at 05:10 AM ----------
Bro how to translatethe webpage
Click to expand...
Click to collapse
I've used Google Chrome automatic translate, anyway it was for older link, it has been updated, but if it's in Russian as the previous one, you can use the same method

SHARED Rom for TESTING [7.1.2] LineageOS-14.1 For Xiaomi Mi A1 (tissot)

removed

Does it boot for now?

Thank you, port miui
---------- Post added at 03:06 PM ---------- Previous post was at 02:28 PM ----------
Screenshot

so what? working?

Teonx said:
so what? working?
Click to expand...
Click to collapse
As the op said, the developer wants testers, so if you are interested test it and report.

akash_eric said:
Using ADB tool
Download the archive with the firmware
Extract It
Open Command Window in ADB tool
fastboot format system
fastboot format cache
fastboot format userdata
fastboot flash boot boot.Img
fastboot flash system system.img
Boot into the system
Click to expand...
Click to collapse
I think these teams will not work for Mi A1.
We need
fastboot flash boot_a boot.img or boot_b
fastboot flash system_a system.img or system_b
etc.

Danger: It will cause your machine to hang the logo, please do not install

PjLyTam said:
Danger: It will cause your machine to hang the logo, please do not install
Click to expand...
Click to collapse
you tried with twrp?
and can u give dmesg plz

[official] MI A1. 8.1 OTA update. 8.1.0OPM1.171019.019(Fastboot/TWRP] version added

Absolute
*******
[8.1.0] OPM1.171019.019.V9.6.2.0.ODHMIFE The
beta version of the official stable firmware Android 8.1.0 from June 13.
Self-made images for fastboot and TWRP.
Fastboot: Unzip the
image. In the same folder, unzip the utilities from the header. Flash one of the batch files:
flash_all.bat - for firmware with saving all the data .
flash_all_clean.bat - for the firmware to be clean (with the removal of all data).
Please note - the bootloader must be previously unlocked!
Both slots are stitched. Warning "Invalid sparse file format at header magic" ignore and wait for the process to finish.
TWRP:
Temporarily load TWRP. To flash an image.
The data is not erased.
Download:
Fastboot: https://drive.google.com/file/d/1KgpEBmFVgP6tkTa6eYq0baI_kCSCPQjK/view?usp=drivesdk
TWRP:https://drive.google.com/file/d/1wIFNV3tpwgLr0UPabK18BkWT8N6oVT5Z/view?usp=drivesdk
[/HIDE]

Please check if 5Ghz WiFi band working or not.

arkadeep2008 said:
Please check if 5Ghz WiFi band working or not.
Click to expand...
Click to collapse
Working bro

Do you keep OTA afterinstalling this?

5ghz is working but no downloading.... Connection is fine ...
Orig. Mac
Germany no volte...
No sd card fixxed (0byte)...
What has xiaomi fixxed ??

yasars said:
5ghz is working but no downloading.... Connection is fine ...
Orig. Mac
Germany no volte...
No sd card fixxed (0byte)...
What has xiaomi fixxed ??
Click to expand...
Click to collapse
I also checked. All previous bugs fixed now like sd card, volte, camera, recording,. 5ghz.
All r working fine as of now.

nestorojeda said:
Do you keep OTA afterinstalling this?
Click to expand...
Click to collapse
Because this is a leak (captured from mi sever) ota. Soo ota will not come. But we can use this. For daily use,. Witht prob if ota come. We need to flash via mi tool. Via choosing save data option

yasars said:
5ghz is working but no downloading.... Connection is fine ...
Orig. Mac
Germany no volte...
No sd card fixxed (0byte)...
What has xiaomi fixxed ??
Click to expand...
Click to collapse
Sd fix check this

Is Magisk and Root working properly on this Rom. ?
Thanks in advance

I am on 9.5.10 April Build, can I flash this beta w/o loosing data??

what is tools folder?
Correct me if I am wrong
1) download the zip
2) extract the zip.
3) flash flash_A.bat or flash_B.bat using mi flash tool.

[email protected] said:
what is tools folder?
Correct me if I am wrong
1) download the zip
2) extract the zip.
3) flash flash_A.bat or flash_B.bat using mi flash tool.
Click to expand...
Click to collapse
what is tools folder Means extract the zip. in adb minimal fastboot folder after then use flash flash_A.bat by just clicking
oe u can flash via manully by these commands

flash via manully commands..
fastboot oem unlock
fastboot flash modem_a modem.img
fastboot flash sbl1 sbl1.img
fastboot flash rpm rpm.img
fastboot flash tz tz.img
fastboot flash devcfg devcfg.img
fastboot flash dsp dsp.img
fastboot flash aboot aboot.img
fastboot flash boot_a boot.img
fastboot flash system_a system.img
fastboot flash lksecapp lksecapp.img
fastboot flash cmnlib cmnlib.img
fastboot flash cmnlib64 cmnlib64.img
fastboot flash keymaster keymaster.img
fastboot set_active a
fastboot oem lock
fastboot reboot

arkadeep2008 said:
I am on 9.5.10 April Build, can I flash this beta w/o loosing data??
Click to expand...
Click to collapse
u need to wipe /data, but doesnt need to wipe your internal storage, i tried before without wiping anything and got bootlooped but after wiping /data via TWRP i got it booting
---
it seems file provided here is not TWRP version, mybad, u can find TWRP version in somewhere in the forum

vikashyadav said:
flash via manully commands..
fastboot oem unlock
fastboot flash modem_a modem.img
fastboot flash sbl1 sbl1.img
fastboot flash rpm rpm.img
fastboot flash tz tz.img
fastboot flash devcfg devcfg.img
fastboot flash dsp dsp.img
fastboot flash aboot aboot.img
fastboot flash boot_a boot.img
fastboot flash system_a system.img
fastboot flash lksecapp lksecapp.img
fastboot flash cmnlib cmnlib.img
fastboot flash cmnlib64 cmnlib64.img
fastboot flash keymaster keymaster.img
fastboot set_active a
fastboot oem lock
fastboot reboot
Click to expand...
Click to collapse
Then i can flash this build with miflash and lock the bootloader?thank you

ruperxl89 said:
Then i can flash this build with miflash and lock the bootloader?thank you
Click to expand...
Click to collapse
Via mi tool that need some other files too. .
Soo i personally. Suggest u to. Flash
Via my given method. ,. Too easy then other methods
Or.yes bootloader. U can lock it. In that rom

vikashyadav said:
Via mi tool that need some other files too. .
Soo i personally. Suggest u to. Flash
Via my given method. ,. Too easy then other methods
Or.yes bootloader. U can lock it. In that rom
Click to expand...
Click to collapse
thank you, i will flash by fastboot and i will close the bootloader
---------- Post added at 09:47 AM ---------- Previous post was at 09:22 AM ----------
vikashyadav said:
Via mi tool that need some other files too. .
Soo i personally. Suggest u to. Flash
Via my given method. ,. Too easy then other methods
Or.yes bootloader. U can lock it. In that rom
Click to expand...
Click to collapse
Is it necessary to come from the latest version of rom stock to be able to flash this beta? I have done the manual process and it has stopped me in the bootloader, it does not start.

ruperxl89 said:
thank you, i will flash by fastboot and i will close the bootloader
---------- Post added at 09:47 AM ---------- Previous post was at 09:22 AM ----------
Is it necessary to come from the latest version of rom stock to be able to flash this beta? I have done the manual process and it has stopped me in the bootloader, it does not start.
Click to expand...
Click to collapse
Which version. R u u using now

Help
I am on stock 8.0 April build and I need to install this build. What steps do I need to follow to get the build up and running. I am a newbie so please detail me all the steps.

theUchihaBrat said:
I am on stock 8.0 April build and I need to install this build. What steps do I need to follow to get the build up and running. I am a newbie so please detail me all the steps.
Click to expand...
Click to collapse
Just follow all instructions that i mentioned. In thia thread.

[Guide] Unlocking Red Magic 3's Bootloader

Requirements:
- To Unlock Bootloader On Nubia Red Magic 3 (NX629J), you will need a computer.
- Charge the Nubia Red Magic to at least 50%.
- You need a USB cable to connect your phone to PC. (Users reported better luck with usb 2.0 port vs usb 3.0.)
Connect your rm3 to your windows 10 pc without developer options enabled. It will be a cd drive, and you can double click it to install the usb drivers
1) Enable the Developer Options
- To Enable Developer Options, Go to your Settings -> About -> Software Information -> More -> Now Tap on the Build Number 10 Times until you see a toast message “Developer options enabled“
2) Go back to settings -> Now you need to enable the OEM Unlock by going to Settings -> Developer Options and check the box for OEM Unlock and USB Debugging
3) Connect your phone to Computer using USB Cable.
4) Open a command prompt window on your computer and type: "adb devices"
5) You will see a pop up window on your phone to allow USB Debugging on your phone. Click ok.
6) Now type the commannd "adb reboot bootloader"
7) Once your phone has rebooted into it's bootloader, type in the command prompt "fastboot devices". This will list the devices connected, your phone should show up.
8) Then, enter "fastboot oem nubia_unlock NUBIA_NX629J"
9) Then enter "fastboot flashing unlock"
9) Finally type "fastboot reboot" into the command prompt.
10) From here you can install twrp, root your phone, etc.
TO RELOCK BOOTLOADER Restart into fastboot on your phone, and use the commands:
"fastboot oem lock"
"fastboot flashing lock"
"fastboot oem relock"
https://imgur.com/pZR4KkL

Thx..now wait for custom rom

twrp here
---------- Post added at 05:44 PM ---------- Previous post was at 04:45 PM ----------
Nubia red magic 3 twrp here
---------- Post added at 05:44 PM ---------- Previous post was at 05:44 PM ----------
https://drive.google.com/file/d/10CZYW-C1scN30y6xxYYCx5lV_eSMwamG/view?usp=drivesdk

sandeepkhatri said:
Plz share twrp here
---------- Post added at 05:44 PM ---------- Previous post was at 04:45 PM ----------
Nubia red magic 3 twrp here
---------- Post added at 05:44 PM ---------- Previous post was at 05:44 PM ----------
https://drive.google.com/file/d/10CZYW-C1scN30y6xxYYCx5lV_eSMwamG/view?usp=drivesdk
Click to expand...
Click to collapse
Thank you for sharing it! I had no clue how to download it from Baidu!

Always welcome friend

Fastboot flashing unlock does not work for me, its not recognizing the command.

SmartViewYTC said:
Fastboot flashing unlock does not work for me, its not recognizing the command.
Click to expand...
Click to collapse
You did fastboot oem unlock first, and then fastboot flashing unlock?

Yep, sadly, same result :/
UPDATE:
FIXED BY USING A USB 2 PORT!!!

Hello guys is there any way to relock bootloader?

It work perfect but remember it delete all of your personal information

aKs. said:
Hello guys is there any way to relock bootloader?
Click to expand...
Click to collapse
Sorry, I was on vacation. fastboot flashing lock in fastboot should work to relock it.

Secretcow said:
Sorry, I was on vacation. fastboot flashing lock in fastboot should work to relock it.
Click to expand...
Click to collapse
Can you confirm this with the global edition?

This command is not working on me.
9) Then enter "fastboot flashing unlock"
Tried different ports on my PC.

mhex said:
This command is not working on me.
9) Then enter "fastboot flashing unlock"
Tried different ports on my PC.
Click to expand...
Click to collapse
Try first "fastboot oem nubia_unlock NUBIA_NX629J"
then "fastboot flashing unlock"

Can you please help me, I want to flash to Global ROM again, But i have this Package Failure errorm

mhex said:
Can you please help me, I want to flash to Global ROM again, But i have this Package Failure errorm
Click to expand...
Click to collapse
Sure thing! I'm assuming you have access to fastboot & are using windows.
Download the right global rom for your phone: https://eu.redmagic.gg/blogs/news/red-magic-3-global-rom-flash-instructions
Once you've downloaded the rom, extract the folder. Use the following commands.
cd "path of folder" (example: "cd C:\Users\Worldchamp\Downloads\NX629J_Z69_EN_WPJ0O_V111") - dont use the quotation marks.
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot reboot

Thanks

Secretcow said:
Sure thing! I'm assuming you have access to fastboot & are using windows.
Download the right global rom for your phone: https://eu.redmagic.gg/blogs/news/red-magic-3-global-rom-flash-instructions
Once you've downloaded the rom, extract the folder. Use the following commands.
cd "path of folder" (example: "cd C:\Users\Worldchamp\Downloads\NX629J_Z69_EN_WPJ0O_V111") - dont use the quotation marks.
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot reboot
Click to expand...
Click to collapse
So what I do if there is no system.img after extracting to flash?

So anyone make any custom rom this gaming beast

On global rom, the fastboot flashing unlock does not work... even if i change ports from 3.0 to 2.0... The TWRP is available only for China rom ? On Global does not work ?
LE: Make sure you have latest ADB Drivers 1.43, after i updated to these, the flashing unlocked worked