Hello,
I have problem with installing ViPER4Android on my Xiaomi Mi Mix 2S (xiaomi.eu, android P, miui 11).
I've installed Magisk 20.3 and Magisk Manager 7.5.1.
Then I wanted to install this addon.
I was trying to do this with instructions on this forum, because I knew that there's problem with compatibility on android 10.
Everything was going properly to the moment of restarting phone after installation.
The phone got into bootloop.
I've tried to do this many times with little modifications of actions, but it hasn't ever worked.
If anyone had the same issue and have some solution for that, please help me. I can't leave without viper
The only help for the phone to start is removing viper's files in TWRP File Manager. Then phone starts normally.
Thanks a lot for every answer <3
nitroseq said:
Hello,
I have problem with installing ViPER4Android on my Xiaomi Mi Mix 2S (xiaomi.eu, android P, miui 11).
I've installed Magisk 20.3 and Magisk Manager 7.5.1.
Then I wanted to install this addon.
I was trying to do this with instructions on this forum, because I knew that there's problem with compatibility on android 10.
Everything was going properly to the moment of restarting phone after installation.
The phone got into bootloop.
I've tried to do this many times with little modifications of actions, but it hasn't ever worked.
If anyone had the same issue and have some solution for that, please help me. I can't leave without viper
The only help for the phone to start is removing viper's files in TWRP File Manager. Then phone starts normally.
Thanks a lot for every answer <3
Click to expand...
Click to collapse
didnt help but same problem here ... also tried many things but nothing works ...
I confirm same issues.
Additionally I can't install magisk also.
Have you made a clean flash of miui 11? I've updated from miui 10.
Sent from my MIX 2S using Tapatalk
rimsilva said:
I confirm same issues.
Additionally I can't install magisk also.
Have you made a clean flash of miui 11? I've updated from miui 10.
Sent from my MIX 2S using Tapatalk
Click to expand...
Click to collapse
Why can't you install magisk? What type of problem do you have?
I've made a clean flash of miui 11, because of changing the ROM, so I had to do that. What ROM do you have?
Now I have the other idea. In this week I will try to change the ROM to any other and try to install Viper again. Maybe it's the problem...
I'm using stable xiaomi.eu miui and have upgraded by OTA.
With more time I will format system and install magisk 20.3 using twrp, at the moment if I flash magisk the status is always "Magic not installed".
Sent from my MIX 2S using Tapatalk
I have maybe a solution
I'm using weekly realease of xiaomi.eu and i sucess to resolve the problem,i don't now if that work for you but for magisk, have you try to install the last version or do a clean flash ? and for viper there are a thread on xda who talk about this problem and how resolve it.
---------- Post added at 05:01 PM ---------- Previous post was at 04:59 PM ----------
I flashed v4afx-rootless_08.18.2019.zip via TWRP and found in folder viper4android v4a.apk. Install, load driver, reboot, works well
anyone fix this ?
Removing some sh files in magisk folder and permissive selinux is the key
had already tried this ... not working ...
HD_Lutze said:
had already tried this ... not working ...
Click to expand...
Click to collapse
Have you tried installing viper magisk then launch viper app, you might have to manually give it storage access for it to launch so make sure it has storage access, grant it root access then install the drivers and reboot. It works for me
Edit: forgot to mention you need the magisk mod called audio modification library before you install viper drivers
Related
Hello,
I have a global Mix 3 with globe Rom (10.2.1) installed, which is basically a debloated version of the xiaomi.eu rom.
My phone is rooted with Magisk 17.3
While trying to install ViPER4Arise and YouTube vanced I noticed that I have root access but changes made to system files do not stick after reboot. While installing something ist says it worked, but after a reboot everything is back to stock. Same with busy box.
Any ideas on this?
I tried different versions of magisk and some fixes for this problem i found on xda for other devices, but nothing worked.
JetzNicht said:
Hello,
I have a global Mix 3 with globe Rom (10.2.1) installed, which is basically a debloated version of the xiaomi.eu rom.
My phone is rooted with Magisk 17.3
While trying to install ViPER4Arise and YouTube vanced I noticed that I have root access but changes made to system files do not stick after reboot. While installing something ist says it worked, but after a reboot everything is back to stock. Same with busy box.
Any ideas on this?
I tried different versions of magisk and some fixes for this problem i found on xda for other devices, but nothing worked.
Click to expand...
Click to collapse
Use one of the custom kernels
Thanks, this solved my problem
I am here to share the patch Viper4Android on MIUI11 BASE ON ANDROID 10.
IT'S WORKING FOR ME
PRE REQUISITE
TWRP AND ROOTED also magisk is installed.
1. INSTALL SELINUX And set it to permisive, set the app on autosatart, and reboot your device
2. Install VIPER4ANDROID APK
grant root access with ask to install driver click install then reboot device.
"You will get bootloop after you install the driver just go to recovery mode by pressing volume up and power down
3. Flash Viper4Android patch on TWRP and reboot. And Viola you have now Viper4Android perfectly installed.
Selinux
https://androidfilehost.com/?fid=4349826312261708284
Viper apk
https://androidfilehost.com/?fid=4349826312261708285
Viper patch
https://androidfilehost.com/?fid=4349826312261708283
Credits to Munchy
Just subscribe to he's channel on YouTube
does it work on other android 10 base phone?
locolyric said:
does it work on other android 10 base phone?
Click to expand...
Click to collapse
Only for Miui base custom rom
It has successfully installed, but it doesn't work at all. Mi8 UD, miui 11 20.1.16, A10.
Drivers Version: 2.5.0.4
NEON: off
Driver: off
And so on...
Attach audio effect is on and writes "all sessions but 0"
Compatibility moed doesn't help.
It works for me after installed mod systemless hosts from Magisk Manager settings. Also, i enabled auto start and other permissions for Selinux and ViPER4Android FX. Didn't get any bootloops and i don't install ViPER patch with twrp. After reboot first time phone from ViPER app, you will be prompted to install again drivers. Just repeat steps. Reboot phone when you ask in app and finally you will have mod installed and enabled.You can also delete Selinux after finish. Miui 11 with android 10
Works great on miui eu 11.0.4.0
Thank you!
Nice! Works on global stable 11.0.4.0 even without patch. Took some reboots, but now it is installed and processing. Yay! Thanks!
Any one having working DTS X IN MIUI 11 Q... getting empty screen.. can you share the steps pls
Not here. Following the steps, bootloop.
Found this link. And followed same but in middle I have used that patch mentioned in this thread to resolve the boot loop issue.
Finally my viper is working.
https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-how-to-install-viper4android-t4037959
All perfect here - pocophone f1 / miui 11 android 10 / no gravity kernel last build
tatuboy said:
I am here to share the patch Viper4Android on MIUI11 BASE ON ANDROID 10.
IT'S WORKING FOR ME
PRE REQUISITE
TWRP AND ROOTED also magisk is installed.
1. INSTALL SELINUX And set it to permisive, set the app on autosatart, and reboot your device
2. Install VIPER4ANDROID APK
grant root access with ask to install driver click install then reboot device.
"You will get bootloop after you install the driver just go to recovery mode by pressing volume up and power down
3. Flash Viper4Android patch on TWRP and reboot. And Viola you have now Viper4Android perfectly installed.
Selinux
https://androidfilehost.com/?fid=4349826312261708284
Viper apk
https://androidfilehost.com/?fid=4349826312261708285
Viper patch
https://androidfilehost.com/?fid=4349826312261708283
Credits to Munchy
Just subscribe to he's channel on YouTube
Click to expand...
Click to collapse
thank you very much for this great job.. you are the best, man ???
tatuboy said:
I am here to share the patch Viper4Android on MIUI11 BASE ON ANDROID 10.
IT'S WORKING FOR ME
PRE REQUISITE
TWRP AND ROOTED also magisk is installed.
1. INSTALL SELINUX And set it to permisive, set the app on autosatart, and reboot your device
2. Install VIPER4ANDROID APK
grant root access with ask to install driver click install then reboot device.
"You will get bootloop after you install the driver just go to recovery mode by pressing volume up and power down
3. Flash Viper4Android patch on TWRP and reboot. And Viola you have now Viper4Android perfectly installed.
Selinux
https://androidfilehost.com/?fid=4349826312261708284
Viper apk
https://androidfilehost.com/?fid=4349826312261708285
Viper patch
https://androidfilehost.com/?fid=4349826312261708283
Credits to Munchy
Just subscribe to he's channel on YouTube
Click to expand...
Click to collapse
This method works for poco f1 miui eu 11.0.4.0 Android 10.
Works well in my poco f1 miui.eu 11 Android Q , Magisk 20.3, No Gravity Custom Kernel :fingers-crossed:
I use with other mods (Dolby Atmos and ICE ICESound) in this link:
https://forum.xda-developers.com/redmi-note-7/how-to/dolby-digital-plus-viper4-miui-pie-rom-t3958080
hey, you seem like you know your way around the Viper mod, I saw your posts in other threads.
yesterday I followed instructions from the link you provided and got stuck in bootload screen after installing drivers. should I have flashed the patch which was given in the OP of this thread?
What about SELinux, I'm not sure what it is, do I need to apply it? if yes, how to in this case? I have the same configuration as you, MIUI 11 FOR POCO from Xiaomi.eu +Magisk 20.3 + No Gravity Kernel
thank you in advance
If anyone else knows the answers, please share, I'd appreciate it
also, is there any place where I can find information on what is the difference between Viper 4Anroid + DDP and Airun/Sauron mod? I'm totally lost
krzylew said:
hey, you seem like you know your way around the Viper mod, I saw your posts in other threads.
yesterday I followed instructions from the link you provided and got stuck in bootload screen after installing drivers. should I have flashed the patch which was given in the OP of this thread?
What about SELinux, I'm not sure what it is, do I need to apply it? if yes, how to in this case? I have the same configuration as you, MIUI 11 FOR POCO from Xiaomi.eu +Magisk 20.3 + No Gravity Kernel
thank you in advance
If anyone else knows the answers, please share, I'd appreciate it
Click to expand...
Click to collapse
Easy, selinux changer is used to change from enforcing to permissive mode so viper can run as per normal. You need to set it as auto start for this app.
Now that you stuck in bootloop is because you haven't used twrp to install the patch. Once install, it should boot into screen.
Hey, thank you!!! Managed to install everyting and seems to work
Just one quick question, when I exit the Dolby app, there is a notification saying "Remote service has stopped" - is this the way it's supposed to be?
krzylew said:
Hey, thank you!!! Managed to install everyting and seems to work
Just one quick question, when I exit the Dolby app, there is a notification saying "Remote service has stopped" - is this the way it's supposed to be?
Click to expand...
Click to collapse
No idea on Dolby app. I'm using poco too with miui Eu Android 10 rom. Bet this is not dolby atmos app.
Have you tried to reinstall it? Or maybe try audio modification library module?
thomas140 said:
No idea on Dolby app. I'm using poco too with miui Eu Android 10 rom. Bet this is not dolby atmos app.
Have you tried to reinstall it? Or maybe try audio modification library module?
Click to expand...
Click to collapse
I think that occasional reboots during phone configuration solved the problem. Thank you for your input.
[/QUOTE][/QUOTE][/QUOTE]Does it work for pixel based evo X roms and
---------- Post added at 09:13 PM ---------- Previous post was at 09:05 PM ----------
Johnjamess said:
Does it work for pixel based evo X roms and
Click to expand...
Click to collapse
Tested it out on evo x latest build works perfect!
Hello guys, I have this problem since upgrading to the latest OOS 10.3.2. If I flash Magisk 20.3, device boots without detecting a SIM, so no signal at all. And phone app crashing.
I'm using the latest TWRP (twrp-3.3.1-18-enchilada-Q-mauronofrio).
Anyone experience the same? How to get this to work? I need my Google PAY back
-=zipp=- said:
Hello guys, I have this problem since upgrading to the latest OOS 10.3.2. If I flash Magisk 20.3, device boots without detecting a SIM, so no signal at all. And phone app crashing.
I'm using the latest TWRP (twrp-3.3.1-18-enchilada-Q-mauronofrio).
Anyone experience the same? How to get this to work? I need my Google PAY back
Click to expand...
Click to collapse
bro check ur imei number wheather it is showing or not dial *#06#
Same thing happenned to me. I removed magisk and all modules completely then used local upgrade and reflashed 10.3.2 OTA and flashed twrp img with fastboot. When it booted into twrp recovery I flashed the twrp installer, rebooted to back to recovery and flashed magisk from twrp and rebooted system. Everything was right with the world then. The key was re moving magisk first.
Sent from my ONEPLUS A6013 using Tapatalk
cjcool_123: IMEI is showing correctly because I reflashed ROM back to get networking ability
Hondo71: I'll try that, thanks
Hondo71: I tried that, but unfortunately with the same result.
I re-flashed stock rom to get functionality back, uninstalled magisk app, flashed twrp, rebooted. flashed magisk, booted and nothing :-/
IMEI is not showing when in this state
Might want to stay where you're at until more reports come in with the all clear or maybe there's an issue with the TWRP or the rom itself
I'd try one more time. Make sure magisk and all the modules are uninstalled. Download & Reinstall 10.3.2 full OTA through local upgrade. Then install magisk mamager. Boot to fastboot and boot TWRP recovery img. Then in recovery flash the twrp installer zip, reboot to recovery and install Latest magisk zip. Reboot system. Data and cellular should work. I lost it on both my 6 & 6T but got it back doing it this way on both.
-=zipp=- said:
Hondo71: I tried that, but unfortunately with the same result.
I re-flashed stock rom to get functionality back, uninstalled magisk app, flashed twrp, rebooted. flashed magisk, booted and nothing :-/
IMEI is not showing when in this state
Click to expand...
Click to collapse
Uninstall magisk and modules then reflash 10.3.2 from local upgrade download twrp installer and Magisk zip to internal memory, install magisk manager. reboot to bootloader, then fastboot boot TWRP, in recovery flash twrp installer, reboot recovery and flash Magisk. Reboot system. Just verified it working again on my OP6.
Sent from my ONEPLUS A6013 using Tapatalk
Hondo71: you were right, it is working now. I don't think I needed to do all the procedures you suggested, I figured out there was one module that was causing this - Native OOS call recorder :-/ I feel stupid I haven't thought about this before.
Anyway, all working now. Now I only need to find out new way how to record my calls
-=zipp=- said:
Hondo71: you were right, it is working now. I don't think I needed to do all the procedures you suggested, I figured out there was one module that was causing this - Native OOS call recorder :-/ I feel stupid I haven't thought about this before.
Anyway, all working now. Now I only need to find out new way how to record my calls
Click to expand...
Click to collapse
I reinstalled oos call recorder and it works fine.
Sent from my ONEPLUS A6013 using Tapatalk
How do I root stock os 10.3.2? Which version of TWRP and Magisk I have to use? Please advise. Thanks in advance.
I also lost the function for telephone.
Mobile network ist working, i can recieve calls, but im not able to do calls.
i tried everything...flashes a few times the latest beta...flashed Magisk new...delteted it...i dont know what else can be possible?
yess same problem after got new update > flash twrp > install magisk > NO SIGNAL That because of OOS native call recording delete and reinstall it >DONE Working great.
Since kernel releases are yet to be published " a total duck move by xiaomi ?" I wanted to keep on using the stock ROM without changing anything but miui is too cringy for me to live with it, so I need to put the ol'rooting hat once again
My question is.. did any one actually root it using magisk and can still get ota , or you would need to uninstall magisk then update then get magisk again?
Also what happens to TWRP , can it coexist with miui ?
I had a previous xiaomi phone (mido) but tbh I never even thought of using the miui and switched to RR once I unlocked the bootloader ?
You can get ota with magisk but updating will rewrite boot and recovery so you'll need to re-root.
mr-mero said:
My question is.. did any one actually root it using magisk and can still get ota , or you would need to uninstall magisk then update then get magisk again?
Also what happens to TWRP , can it coexist with miui ?
Click to expand...
Click to collapse
FYI, I'm still on stock EU v12.0.3.0 with mauronofrio TWRP and rooted with Magisk.
I got two OTAs already, the last with v12.0.4.0 -- and it even tried to apply one of them while I wasn't looking but it obviously failed, since there's no stock recovery.
pnin said:
FYI, I'm still on stock EU v12.0.3.0 with mauronofrio TWRP and rooted with Magisk.
I got two OTAs already, the last with v12.0.4.0 -- and it even tried to apply one of them while I wasn't looking but it obviously failed, since there's no stock recovery.
Click to expand...
Click to collapse
What if I reflash the stock recovery.img after rooting, that might get the ota working ?
Yes I know I would still have to flash twrp and magisk again after it
I'll test it on my old phone first , hope it can work as a reference for one last time of it's miserable life
mr-mero said:
What if I reflash the stock recovery.img after rooting, that might get the ota working ?
Click to expand...
Click to collapse
I thought the same, but then I'm not keen on moving to v12.0.4.0 right now, so I didn't budge. Let us know how it goes. :good:
.
How to install magisk on stock miui global after bootloader unlock?
@coolboy744:
In case you haven't already, you'll have to install a custom recovery first...
.
pnin said:
@coolboy744:
In case you haven't already, you'll have to install a custom recovery first...
.
Click to expand...
Click to collapse
yes i know that. using since 2015 TWRp. but i heard there is system wipe issue on poco twrp. if you installed it confirm
No issue here, just flashed it through TWRP as usual.
.
what about installing magisk from orangefox? What are the steps?
abubin said:
what about installing magisk from orangefox? What are the steps?
Click to expand...
Click to collapse
Still the same, just flash the root file and reboot it up... And also install magisk manager to have root management
Orange Fox is much more recommended for our Poco by ManoloRey for installing AOSP ROMS...
yan2xme said:
Still the same, just flash the root file and reboot it up... And also install magisk manager to have root management
Orange Fox is much more recommended for our Poco by ManoloRey for installing AOSP ROMS...
Click to expand...
Click to collapse
thanks! done it and it is working now.
Does anyone know how to get Viper4Android working on 10.3.7?
I updated from 10.3.5 and I remember I had problems installing it on there too and I had to force stop the app before it would work each time. I've updated V4A to the 2.7.2.1 version through magisk and it just says Status: Abnormal, am I supposed to use a different one or?
If anyone knows, thanks
Use magisk for v4A
"I've updated V4A to the 2.7.2.1 version through magisk"
Has anyone managed to make it work? I'm installing it for the first time on 10.3.7 using magisk and I'm also getting the Status: Abnormal message.
Juwapa said:
Does anyone know how to get Viper4Android working on 10.3.7?
I updated from 10.3.5 and I remember I had problems installing it on there too and I had to force stop the app before it would work each time. I've updated V4A to the 2.7.2.1 version through magisk and it just says Status: Abnormal, am I supposed to use a different one or?
If anyone knows, thanks
Click to expand...
Click to collapse
Julortiz said:
Has anyone managed to make it work? I'm installing it for the first time on 10.3.7 using magisk and I'm also getting the Status: Abnormal message.
Click to expand...
Click to collapse
Hello guys,
So what I think that might prevent V4A to be working is having the latest version of Magisk installed. I had the same issue as you guys till I reverted back to Magisk v21.0 from v21.1.
Mr.FREE_Bird said:
Hello guys,
So what I think that might prevent V4A to be working is having the latest version of Magisk installed. I had the same issue as you guys till I reverted back to Magisk v21.0 from v21.1.
Click to expand...
Click to collapse
Thanks for the shout, Mr. Freebird. So yeah I guess it is a problem with new versions of Magisk. I tried on the newest update as well, 21.2, and still couldn't get it to work.
For Julortiz and anyone needing help getting it to work again, the exact steps I did were
- Downgrade Magisk to 21.0
- Download V4A 2.7.2.1 from Magisk and open the app but do not install driver yet
- Go back to Magisk and install Audio Modification Library but do not let Magisk reboot
- Go back to V4A and let it install the driver and reboot
- After reboot, open V4A, go to settings and check Legacy Mode
- Enjoy
Also this is probably really obvious, but make sure you screenshot or take note of all other modules you have installed because downgrading will delete all modules. Again this is probably obvious, just don't be dumb like me and lose all your other modules lol