Database Info

[ROM][LG Aristo] --- iPioneer Stock v1 --- [LGMS210][10i]

iPioneer Stock v1 for LG Aristo (LGMS210)(10i)
Disclaimer:
/***
* Your warranty is void now (and I'm sure it was void before this process).
* I am not responsible for hard or soft bricked devices, boot loops, dead or corrupt sd cards, strange behavior or you getting a heart attack 'cuz your youtube app is not working properly.
* YOU and only YOU are choosing to make these modifications, do not blame on me.... I will just ignore you.
***/
This rom is a stock rom and is almost 100% stock but it comes without dm-verity to avoid boot problems in case you want to preserve your custom recovery.
This rom is meant to be used in case of emergency, give a fresh start to your device, restore your device in case of corruption or just to play around.
I have tested this rom on my own device and everything is working properly.
Please check the specifications at the end of this op.
Requisites:
New assert-fixed twrp version forked from messi's twrp
Note: All the credit for twrp goes to @messi2050, this is just an assert revision of the current twrp made from messi. It will be deleted as soon as we get an updated version with the right assert tags.
Installation steps
Download the new assert-twrp version and flash it as you would normally do it.
Standard Wipe (factory reset) and Format Data are optional (unless you have a non-stock based rom installed already). If you want a full fresh start you should format data, reboot into recovery again and do an standard wipe x3.
Install the rom.
Download files:
New assert-fixed twrp version: https://www.androidfilehost.com/?fid=889764386195921266
Rom: https://www.androidfilehost.com/?fid=817550096634786356
Device: LG Aristo
Model: LGMS210
Code Name: lv3
Carrier: MetroPCS
Android version: 7.0
Software version: MS21010i
Patch level: April 1, 2017
#####
Update
------------
Please read requisites and download the new file using the new link.
With this new assert-fixed version of the current twrp made from messi we can now avoid issues flashing the original iPioneer Rom.
NOTE: This will only work on MetroPCS, not sure about tmobile, I will try to make it for both carriers...

Reserved 1...

Reserved 2...

Screens if you can?

bwinbig_87 said:
Screens if you can?
Click to expand...
Click to collapse
I think you mean screenshot right??
I usually don't take screenshots on my stock roms, basicly because there is nothing new/fancy to show. It is stock and it'll look the same as when you buyed your phone, with the same default wallpaper and apps...
I take screenshots in my slim versions (wich I will start soon).

For some reason doing the Vol - and Power does the same wipe problem as in Messi's V1 of twrp for me. Am i doing something wrong?

Lgms210 custom roms
My name is red208 and I just want to know if there is a custom ROM for MetroPCS LG ms210 preferably like Resurrection Remix I also want to know if this stock
ROM right here is at all any different form the way metro does it? Im really trying to bypass the 8 gig hotspot restrictions that metro has so it can be a truly unlimited hotspot and i know the easiest way to do that is too just Flash a custom rom plz help me??!!?

bwinbig_87 said:
For some reason doing the Vol - and Power does the same wipe problem as in Messi's V1 of twrp for me. Am i doing something wrong?
Click to expand...
Click to collapse
You mean that you power off your device and the use the Volume Key and Power hit yes twice, right???
If that is the case you could try flashing DM-Verity or SuperSu again to avoid that little bootloop. Or you can just stick (like me) to do and ADB REBOOT RECOVERY.
Please notice that I never mentioned that the bug-fixed twrp was intended for this bootloop/reset issue, it just correct some asserts problems that block our devices from installing this rom and any other room with the right and original asserts.

red208 said:
My name is red208 and I just want to know if there is a custom ROM for MetroPCS LG ms210 preferably like Resurrection Remix I also want to know if this stock
ROM right here is at all any different form the way metro does it? Im really trying to bypass the 8 gig hotspot restrictions that metro has so it can be a truly unlimited hotspot and i know the easiest way to do that is too just Flash a custom rom plz help me??!!?
Click to expand...
Click to collapse
Question 1: There is not at the moment, I will start with Leaneage OS after doing my slim version. I don't know how many time it will take as this is my second device and I am just playing around with it (my V20 give me more pleasure).
Question 2: Stock means Stock... Nothing new nor fancy, same setup, apps, etc.... I mention on the OP what this rom porpuse is.
Hotspot issue: not all the time depends on a custom rom, this is my first device with metropcs service, I don't know if they sync your hotspot usage with their servers. If they do you are not going to be able to bypass that. Any ways my slim version it would get rid of plenty of bloatware and it may work if they depend on the main app on the device.

red208 said:
My name is red208 and I just want to know if there is a custom ROM for MetroPCS LG ms210 preferably like Resurrection Remix I also want to know if this stock
ROM right here is at all any different form the way metro does it? Im really trying to bypass the 8 gig hotspot restrictions that metro has so it can be a truly unlimited hotspot and i know the easiest way to do that is too just Flash a custom rom plz help me??!!?
Click to expand...
Click to collapse
The hotspot will be monitored regardless of if you're using a stock room or custom. The only difference being that on a custom rom, you won't receive a notification stating you went over 8 gigs. Once you hit the 8 gig limit, your hotspot speed will be slowed down.
Also, when you go over your 8 gigs of high-speed hotspot it won't reset at the beginning of your pay period, but exactly a month (to the day) after you went over.
So say your pay period is the 5th and you go over your limit on the 4th. You'd have to wait until the 4th of the following month before you get high speed back.
---------- Post added at 07:36 PM ---------- Previous post was at 07:33 PM ----------
xtremelora said:
Question 1: There is not at the moment, I will start with Leaneage OS after doing my slim version. I don't know how many time it will take as this is my second device and I am just playing around with it (my V20 give me more pleasure).
Question 2: Stock means Stock... Nothing new nor fancy, same setup, apps, etc.... I mention on the OP what this rom porpuse is.
Hotspot issue: not all the time depends on a custom rom, this is my first device with metropcs service, I don't know if they sync your hotspot usage with their servers. If they do you are not going to be able to bypass that. Any ways my slim version it would get rid of plenty of bloatware and it may work if they depend on the main app on the device.
Click to expand...
Click to collapse
I was just about to ask if your slim rom would be a debloat, but now I know. So good look there.
Also, if and when you get down on lineage. I'll be more than happy to test, I had been working on it myself before I blew up my hard drive. So I'd rather help then be a sponge.

Im also willing to test.

Ufffff...
Ok guys... After several days testing / building the slim version I am getting really frustated and dissapointed...
Everytime something goes wrong there is no way to boot into recovery mode using hard keys, that only makes twrp wipe and reboot but not entering on the complete twrp options. So everytime that I flash the test .zip of the slim version and I get an error before actually booting completely into the normal system I have to go to Mocosoft (windows) and use LGUP to flash the .kdz and start from scratch all over.
I hate to have to reboot my laptop and use Mocosoft, I really hate not been able to reboot in recovery mode as in other LG devices with the hardkeys.
I guess is another limitation of the actuall twrp version that we have, maybe we will have to wait for an updated twrp version to avoid all this trauma.
Right now I feel like I'm done with this device, I have used LGUP around 15 times in 3-5 days just because I can no go into twrp.
If this is happening with a stock based slim version I don't want to think about building/testing lineageos.
If you know an option to go to twrp version after a corrupted/incomplete system tell me about please. I have used the followings procedure but not success:
1.- Hardkeys (just makes twrp wipe the system).
2.- Fastboot boot twrp.img (command fails).
3.- Flashing original twrp (from messi) and then the flashing back the bug-fixed twrp (forked from messi) and trying to reproduce the first boot taking out the battery and using hardkeys (no luck, still wipes the system and reboot by it self).
Sorry guys, I think I will stop for a few days... Maybe I need to go out and have a little fun and come back...

Lgms210
any luck?

n33b said:
any luck?
Click to expand...
Click to collapse
Actually yes...
@messi2050 already builded an updated twrp version avoiding problems with the Hardkeys...
So now I can continue with the test and after that with Lineage if no body build it first... :laugh:

xtremelora said:
Actually yes...
@messi2050 already builded an updated twrp version avoiding problems with the Hardkeys...
So now I can continue with the test and after that with Lineage if no body build it first... :laugh:
Click to expand...
Click to collapse
I hope you can success with lineage 14.1, i wasn't able to make it boot on the stylo 2 plus since ms210 and ms550 are almost the same if you managed to boot it then I'm sure it will work on the stylo too, good luck.

I know it's really late, but I was just gonna say build a version of your rom with the flags for Messi's twrp and just use that to flash.
Either way, I'm glad you managed to sort the shiz out and I'm wishing you the best of luck with development.

ninjasinabag said:
I know it's really late, but I was just gonna say build a version of your rom with the flags for Messi's twrp and just use that to flash.
Either way, I'm glad you managed to sort the shiz out and I'm wishing you the best of luck with development.
Click to expand...
Click to collapse
???
I don't get it?
You mean the asserts right?
I haven't test the new twrp version of messi (no free time), so you are telling me that the new version still have the wrong flags?
I usually don't remove the CORRECT flags from my roms (a Tmo user could flash the metropcs and cause a brick/softbrick for example) to avoid user's mistakes/misread...

xtremelora said:
???
I don't get it?
You mean the asserts right?
I haven't test the new twrp version of messi (no free time), so you are telling me that the new version still have the wrong flags?
I usually don't remove the CORRECT flags from my roms (a Tmo user could flash the metropcs and cause a brick/softbrick for example) to avoid user's mistakes/misread...
Click to expand...
Click to collapse
The new version has the correct flags. I never said it didn't.
I'm saying that a twrp can be created with unified flags allowing a room to be shared between devices without having to build between the lv3 and the aristo. Sorta like what had been done with the LG Leon a couple years ago.
Instead of using the h or Ms flags relating to model number, you can use the consistent board config as the basis.
Either way, the only way someone could brick or soft brick from this method is if it were like the S4 situation where you have to flash the carrier specific kernel version for the device. Like using the At&t rom on the Verizon s4 will cause a soft brick until you flash the Verizon s4 kernel.
This is only just an idea in response to you having to go back and forth (before you got the updated twrp) on recovery versions during your tests

OP updated to link and point to the new and updated twrp version from messi.
You guys no longer need the bug-fixed twrp version as before.
Sent from my LGMS210 using Tapatalk

xtremelora said:
OP updated to link and point to the new and updated twrp version from messi.
You guys no longer need the bug-fixed twrp version as before.
Sent from my LGMS210 using Tapatalk
Click to expand...
Click to collapse
Can you do me a solid, sorry if I'm turning into an annoyance. Add "lg aristo" into either the thread tags or into the thread name itself. It'll add the thread into the Aristo board for easier access and make this easier to find. I recommended your rom to another user who had no idea what I was even talking about. (So I shared the link if you don't mind me doing so)

Get stock ROM + TWRP + root for Lenovo k10e70 here

Finally, after more than a year searching, asking, try & error session, I compiled the safest method to get root and custom recovery for this phone.
As you know, there are very little support and resources out there for this model. Like the title said, I provide the resources within my knowledge and skills to help you.
I, myself debug this so you don't have to worry about making the same mistake I made. (What mistake you ask? Hmmm..)
This phone come with 2 variants. Mine is 1GB Ram but I'm sure this will work for any K10E70 as well.
Before you guys start all this, make sure you know what you doing. At least, prepare. Dig some more about the item I mentioned. Get to know what the "do" and "don't", because if you just ignore this, in between now to success, there a greater risk of your phone getting brick. Last but not least, do backup.
Okay, lets get started...
WHAT YOU NEED
#1 Courage (For trying something new..)
#2 Patient (Lot of it..)
#3 ROM (This ROM is built for China market, so there's no GAPPS since they had their own version of "Google". But don't worry, I got this covered..)
#4 Magisk - Systemless root
#5 TWRP custom recovery
#6 GAPPS (Optional)
INSTRUCTIONS
1. Flashing ROM using stock recovery
- Place ROM in SD card root.
- Reboot to recovery. (Power button+Vol Up)
- Once you get in recovery, go to 'Apply Update from SD Card'.
- Find your ROM zip file, install.
- Wait till finish, reboot. (or it'll reboot itself, either one..)
- You have to understand that this ROM is meant for China market, so there's
a lot of Chinese bloatware. This is why you need root to remove all that.
2. Installing Magisk for root
- Install Magisk from provided link.
- Get boot.img from provided link.
- See, learn, and dig more here.
3. Flashing TWRP .img
- Get the TWRP .img from provided link.
- here how to flash and here to know what is actually TWRP .
Or
- You can download Flashify and flash from there. I can't guarantee the success but the possibility is there.
- Assumed you success, you'll find that the custom recovery is in Chinese (again..).
- Don't panic, I got this too. Changing the theme will also change the language.
- Get the Materialized-Dark.zip from provided link.
- Refer here how to change theme.
- Refer here to figure out the menu placing, which is which.
4. Flashing GAPPS (Optional)
- Get the GAPPS from provided link.
- Flash using your newly hot smoking TWRP
You can get all the necessary file HERE.
Million thanks and credits goes to topjohnwu for a magical Magisk, TeamWin for brilliantly TWRP, tasnim_tamim for TWRP Material theme and lastly for a some random Chinese guys and ladies who helping and providing me stock firmware. I hope there are more variety of support for this phone in the nearest future, such as custom rom, etc.
Have a nice day!

Great job, you are the man. Any help to root Lenovo K10a40 please, i think it's similar to your device and thanks in advance.
Sent from my Lenovo K10a40 using XDA-Developers Legacy app

walid77dz said:
Great job, you are the man. Any help to root Lenovo K10a40 please, i think it's similar to your device and thanks in advance.
Click to expand...
Click to collapse
I think Magisk will do the trick, as long as you can pull out boot.img from your rom. Its worth a try. Good luck.

Any site has posted about the firmware/rom yet?
Can someone confirm this?
https://firmware.gem-flash.com/index.php?a=browse&b=category&id=9013
This is from 4pda forum.
https://4pda.ru/forum/index.php?showtopic=797076

morfyrd said:
Any site has posted about the firmware/rom yet?
Can someone confirm this?
https://firmware.gem-flash.com/index.php?a=browse&b=category&id=9013
This is from 4pda forum.
https://4pda.ru/forum/index.php?showtopic=797076
Click to expand...
Click to collapse
You need to pay for that. Did you check my link?

carlosromulo said:
Somehow I got slow connections, so the ROM not available for temporary, but the others file is ready for download. I'll update the link if fully uploaded, won't take long.
Click to expand...
Click to collapse
I read this, open the link, there is no ROM there. I need it badly.

Im sorry, my bad. Somehow I forgot to upload the rom. I'll get it done by Monday or Tuesday.

Need the rom too, my only have china and english languages...

Already upload the stock rom. Can check it out now. Apologize for the delay.

morfyrd said:
Any site has posted about the firmware/rom yet?
Can someone confirm this?
https://firmware.gem-flash.com/index.php?a=browse&b=category&id=9013
This is from 4pda forum.
https://4pda.ru/forum/index.php?showtopic=797076
Click to expand...
Click to collapse
Rom already uploaded.

Does this work for K10 E40, or just E70 phones? Sounds like it's almost the same phone.
[EDIT] Just noticed that the k10e40 is the same as Lenovo C2 Power

carlosromulo said:
Finally, after more than a year searching, asking, try & error session, I compiled the safest method to get root and custom recovery for this phone.
As you know, there are very little support and resources out there for this model. Like the title said, I provide the resources within my knowledge and skills to help you.
I, myself debug this so you don't have to worry about making the same mistake I made. (What mistake you ask? Hmmm..)
This phone come with 2 variants. Mine is 1GB Ram but I'm sure this will work for any K10E70 as well.
Before you guys start all this, make sure you know what you doing. At least, prepare. Dig some more about the item I mentioned. Get to know what the "do" and "don't", because if you just ignore this, in between now to success, there a greater risk of your phone getting brick. Last but not least, do backup.
Okay, lets get started...
WHAT YOU NEED
#1 Courage (For trying something new..)
#2 Patient (Lot of it..)
#3 ROM (This ROM is built for China market, so there's no GAPPS since they had their own version of "Google". But don't worry, I got this covered..)
#4 Magisk - Systemless root
#5 TWRP custom recovery
#6 GAPPS (Optional)
INSTRUCTIONS
1. Flashing ROM using stock recovery
- Place ROM in SD card root.
- Reboot to recovery. (Power button+Vol Up)
- Once you get in recovery, go to 'Apply Update from SD Card'.
- Find your ROM zip file, install.
- Wait till finish, reboot. (or it'll reboot itself, either one..)
- You have to understand that this ROM is meant for China market, so there's
a lot of Chinese bloatware. This is why you need root to remove all that.
2. Installing Magisk for root
- Install Magisk from provided link.
- Get boot.img from provided link.
- See, learn, and dig more here.
3. Flashing TWRP .img
- Get the TWRP .img from provided link.
- here how to flash and here to know what is actually TWRP .
Or
- You can download Flashify and flash from there. I can't guarantee the success but the possibility is there.
- Assumed you success, you'll find that the custom recovery is in Chinese (again..).
- Don't panic, I got this too. Changing the theme will also change the language.
- Get the Materialized-Dark.zip from provided link.
- Refer here how to change theme.
- Refer here to figure out the menu placing, which is which.
4. Flashing GAPPS (Optional)
- Get the GAPPS from provided link.
- Flash using your newly hot smoking TWRP
You can get all the necessary file HERE.
Million thanks and credits goes to topjohnwu for a magical Magisk, TeamWin for brilliantly TWRP, tasnim_tamim for TWRP Material theme and lastly for a some random Chinese guys and ladies who helping and providing me stock firmware. I hope there are more variety of support for this phone in the nearest future, such as custom rom, etc.
Have a nice day!
Click to expand...
Click to collapse
Hello. My K10e70 got stuck at the logo and cannot boot. Any chance to get it working again?
Cannot find the original rom and stock recovery anywhere.
Please help.

B1ackromeo said:
Hello. My K10e70 got stuck at the logo and cannot boot. Any chance to get it working again?
Cannot find the original rom and stock recovery anywhere.
Please help.
Click to expand...
Click to collapse
You can check my first post. Everything you need is in there. Did you even read it?

hi!
really great! works perfect!
but attention! the rom are only in chinese and filo-chinese-english. and totally lacks google service.
my best regards.

No consigo el firmware o archivo Scatter K10E70, alguien puede compartirlo, porfavor.
do not get the firmware or file Scatter K10E70, someone can share it, please

[ROM] Stock Oreo 8.1 With June Security Patch (OPM1.171019.019.V9.6.2.0.ODHMIFE)

Ladies and Gentlemen,
It is my pleasure to present the latest stock Oreo 8.1 (Beta) ROM for Xiaomi Mi A1. Up till now, only a handful of testers were able to use the stock beta 8.1
But now, everyone has the opportunity to use it on their device.
Disclaimer:
If you are planning to flash the ROM on your device, you are on your own. I would not be responsible if anything happens to your device. Your warranty will be void after flashing the ROM. You need to go back to stock stable ROM with a locked bootloader for Warranty.
Requirements:
1. Xiaomi Mi A1 (Ofcourse)
2. A PC (I am using Windows 7 here)
3. The ROM file (Available on the link below)
4. MiFlash Tool ( Link: http://en.miui.com/thread-345974-1-1.html ) (A big thanks to Miui forum for making the tool available on miui forum)
5. ADB Platform tool (Search on google)
6. Patience
Installation Process:
1. Download the ROM file from the given link and unzip it.
2. You will see a folder with name as tissot_images_V9.6.2.0.ODHMIFE_8.1
3. Keep it on C drive
4. Install MiFlash Tool on your PC from the given link
5. Set up ADB driver properly on your PC (It's very important)
6. Now go to your device and enable Developers option by tapping on Build Number 7 times.
6. Open Developers Option and enable "OEM Unlocking" and "USB Debugging" option.
7. Now press and hold the power button and Volume down button for about 10 seconds until you see a small bunny on the screen.
Now connect your device to your PC and open a command box and type fastboot oem unlock
8. Once the bootloader is unlocked, put your device in fastboot mode again and connect it to PC. (BE WARNED!!! if anyone is on May security patch, unlocking bootloader will erase everything from the device and device will restart again. You will need to unlock developers option again and enable "USB debugging" option once more)
9. Now open MiFlash Tool and see if it reads your device serial number by clicking on "Refresh". Now, select tissot_images_V9.6.2.0.ODHMIFE_8.1 and click on "Flash". Make sure you are doing it in a proper way.
10. Wait until you see a "Flash Done" message on the screen. It may take around 5-10 minutes. Once done, your device will boot into system and Congrats! Now you have Oreo 8.1 on your device with June security patch.
N.B. It is best that you select "Clean all and lock" option on MiFlash tool.
Flashing Guide For TWRP & Custom Kernel:
1. Grab the latest twrp recovery image (Oreo) and twrp installer zip file.
2. Put the recovery image in ADB folder and the installer zip in your device.
2. Boot your device into fastboot mode and connect it to the PC.
3. Make sure the bootloader is unlocker.
4. Open a command box and type fastboot boot xxx.img (xxx= recovery image name)
5. Once your device is boot into twrp, flash TWRP installer zip file and reboot back to recovery.
6. Now flash the custom kernel of your choice and Magisk (optional).
7. Reboot back to system.
Important Note:
If anyone has any problem understanding the steps, I would recommend that you google or search on Youtube. There are lots of Videos showing on how to flash stock ROM on MiFlash tool. Please don't blame me if you skip any step or do it wrong. I have shared the standard steps that remain the same for flashing both stable and beta rom. It is advised that you STAY AWAY if you don't know what you are doing. I am certainly not going to take any blame for improper flashing. As you have decided to flash the ROM, I expect you to have a little knowledge about how to use MiFlash tool. A lot of newbees have problem at first, especially when flashing rom on MiFlash tool. That's because of selecting and flashing the rom file in an improper way. You need to first learn exactly which folder to flash or else you will always end up on a bootloop. Please don't blame me for not spoon feeding you.
Bugs Encountered:
I have been using the ROM for two days and I am yet to find any bugs except ctsProfile shows as false and Google Play Store shows Uncertified.
*For better battery life, you can try Void kernel (Choose the stock version).
ROM Download Link:
https://www.androidfilehost.com/?fid=818222786056041186
Credit:
Xiaomi, 4PDA, @topjohnwu for Magisk, @flex1911 for Void kernel, @CosmicDan & @mohancm for their work on TWRP.
Special Note:
I apologize to all for breaking any possible XDA rule and hurting anyone here!! Please note that I am not getting paid for sharing this post here. If anyone still feels something bad, you can either let me know or you can report it to the admin. But again, I am extremely sorry for breaking any rule here.

MiFlash Tool

Screenshots will be added shortly.

Screenshots

Already posted here https://forum.xda-developers.com/showpost.php?p=76813554&postcount=340
And fyi, i already been using this rom for past 2 days, back to AEX coz battery drain is fast, not recommended for daily usage.

exodius48 said:
Already posted here https://forum.xda-developers.com/showpost.php?p=76813554&postcount=340
And fyi, i already been using this rom for past 2 days, back to AEX coz battery drain is fast, not recommended for daily usage.
Click to expand...
Click to collapse
I can confirm battery drain with this rom.

Rowdyy Ronnie said:
Credit:
Xiaomi for allowing me to try their Beta ROM and allowing me to share it on XDA
N.B. Sharing the ROM file anywhere else without my permission will be considered as stealing and will be reported to XDA if found.
Click to expand...
Click to collapse
Did xiaomi give you the permission to share it on xda?

muruu said:
Did xiaomi give you the permission to share it on xda?
Click to expand...
Click to collapse
No, this is leaked beta. He just reshare from displax @ 4pda.ru

after sucessfully flashing using miflash it stucks on andriodone

N1ck474 said:
This update is leaked from weeks, why complaining here and now?
We're getting delayed updates cause Xiaomi is far away from Quick updates (MIUI or Stock, still Xiaomi).
Click to expand...
Click to collapse
Can we root it or when unlock bootloader cause erase all information like may update + is it good for daily use ?

joeniz said:
when unlock bootloader cause erase all information like may update?
Click to expand...
Click to collapse
Why would they remove a security feature they just recently added?

joeniz said:
Can we root it or when unlock bootloader cause erase all information like may update + is it good for daily use ?
Click to expand...
Click to collapse
It doesn't wipe data partition like what was happening on May security patch. And I haven't noticed any bug as of now. Some people said battery life is not that good. I can't comment on that as I use Void kernel.

Seems like a lot of people have some sort of issue with this post. First of all, this is not a custom rom and I didn't build it. So, if there is some sort of bugs on the ROM, that's not my fault. Second, yes I brought the file from somewhere else so that more people can use it. So, what is the problem here? Before you point your finger on me for a bootloop or bad battery life, you should read the disclaimer first. When you decide to do any experiment with your device, you should have a fair amount of knowledge of what you are doing. Before sharing the file on XDA, I flashed and tried it on my device and there was no bootloop or any other issue whatsoever.

dback31 said:
Why would they remove a security feature they just recently added?
Click to expand...
Click to collapse
Cause i found no phone that u can't root !!
---------- Post added at 09:18 PM ---------- Previous post was at 09:15 PM ----------
Rowdyy Ronnie said:
It doesn't wipe data partition like what was happening on May security patch. And I haven't noticed any bug as of now. Some people said battery life is not that good. I can't comment on that as I use Void kernel.
Click to expand...
Click to collapse
What about messenger fb in any rom i use i get animation lag in messenger when message appear things like that and if someone send me message while i using phone the phone animation lag .... Only in fb messenger i found this problem i hate this app .... Anybody have that issue because iam going mad .

Rowdyy Ronnie said:
Seems like a lot of people have some sort of issue with this post. First of all, this is not a custom rom and I didn't build it. So, if there is some sort of bugs on the ROM, that's not my fault. Second, yes I brought the file from somewhere else so that more people can use it. So, what is the problem here? Before you point your finger on me for a bootloop or bad battery life, you should read the disclaimer first. When you decide to do any experiment with your device, you should have a fair amount of knowledge of what you are doing. Before sharing the file on XDA, I flashed and tried it on my device and there was no bootloop or any other issue whatsoever.
Click to expand...
Click to collapse
If you just share a rom build by someone else, this is the wrong section of the forum to post it.
Too, you say (in op) you have permission from xiaomi to post it here in xda. This sounds unusual. Do you have any proof for this claim?

Thread cleaned.
Thread moved to the guides section where shared ROMs belong. The redirect from development section will expire in 24 hours.
:good:

Rowdyy Ronnie said:
N.B. Sharing the ROM file anywhere else without my permission will be considered as stealing and will be reported to XDA if found.
Click to expand...
Click to collapse
hahahah oh wow
the best joke i ever seen
seriously
copyright to leaked build? hahaha i can't stop

Closed beta ROM, so no point in "allowing" you to share it. They could open beta and do it themselves.
I call fake news on that
You share a rom from another forum. Okay. It was already been shared in XDA by the original poster in 4pda.
I call this reposting in the same forum.
You state that the ROM isn't yours and you "share" it with other people on XDA. And then you say reposting is stealing? Didn't you repost it as well? For you is not stealing but for others is?
Conclusion: Are you that desperate for attention?

Is this the official beta rom?

Rowdyy Ronnie said:
Credit:
Xiaomi for allowing me to try their Beta ROM and allowing me to share it on XDA
Click to expand...
Click to collapse
How did you manage to get permission from Xiaomi? Have some proofs?

[Recovery] TWRP for the Nubia Z18(NX606J)

Hey,
youyim123 recently made his TWRP build available that I was trying to compile myself. So without further ado, here is a more or less working TWRP for the Nubia Z18 with instructions of how to install it.
Link to recovery.img
How to install it:
Boot into bootloader using
Code:
adb reboot bootloader
Unlock the bootloader using
Code:
fastboot oem nubia_unlock NUBIA_NX606J
Flash the recovery.img using
Code:
fastboot flash recovery recovery.img
IMPORTANT! Navigate to "reboot to emergency recovery mode". Do not use
Code:
fastboot reboot recovery
as it might not work correctly!
I found disconnecting the device from USB to be more reliable, so do that for stability
If it gets stuck, repeat steps 1 and 4. No need to reflash, just be patient
Language will be Chinese, so change that by using the settings button (second from below on the right)
That's it, you have a working TWRP now Enjoy!
EDIT: DO NOT TRY FLASHING MAGISK AS IT WILL DAMAGE DM-VERITY AND YOU'LL HAVE TO BOOT RESCUE YOUR DEVICE! YOU CAN USE MY recovery script in the bloat remover thread to fix your device
In case you get stuck in a bootloop, repeat the installation guide, then use
Code:
adb push stock.zip /data/media/0
and reflash stock firmware as a last resort until a custom ROM is available.
All credit for this goes to youyim123 and his amazing work! I know he struggled releasing this because his work is often used or redirected without his consent or giving him credit, so I'm grateful he decided to release it.

*reserved*

Can i use this to flash Gapps

aqblwd said:
Can i use this to flash Gapps
Click to expand...
Click to collapse
In theory, yes. In practice, it somehow doesn't give me any GApps when flashing it. I'm trying to cooperate with the OpenGapps team to fix this.

any update info for flashing gapps ? i really want to use my nubia z18 with google environment on it. tks

shevaman7 said:
any update info for flashing gapps ? i really want to use my nubia z18 with google environment on it. tks
Click to expand...
Click to collapse
None yet. I'd say community involvement isn't exactly one of the OpenGapps team's good points
See the Gitter thread for tracking updates here: https://gitter.im/opengapps/general
If you know of any other way to contact them, feel free to do so and send them the logs I attached in the gitter post (same username as here)

shevaman7 said:
any update info for flashing gapps ? i really want to use my nubia z18 with google environment on it. tks
Click to expand...
Click to collapse
You can use google xspace

elnas1369 said:
You can use google xspace
Click to expand...
Click to collapse
EDIT: Okay I tried the app and it's doing something that looks like installing play services? @elnas1369 would you mind explaining what you did in detail? Because most of us probably can't speak chinese and it's not intuitive unfortunately

curtisy said:
EDIT: Okay I tried the app and it's doing something that looks like installing play services? @elnas1369 would you mind explaining what you did in detail? Because most of us probably can't speak chinese and it's not intuitive unfortunately
Click to expand...
Click to collapse
I did it on my Nubia X and it works pretty good, you just have to follow the steps, i've found some tutos on youtube it's very easy. You can search for google xspace installing or something like that

curtisy said:
Hey,
youyim123 recently made his TWRP build available that I was trying to compile myself. So without further ado, here is a more or less working TWRP for the Nubia Z18 with instructions of how to install it.
Link to recovery.img
How to install it:
Boot into bootloader using
Code:
adb reboot bootloader
Unlock the bootloader using
Code:
fastboot oem nubia_unlock NUBIA_NX606J
Flash the recovery.img using
Code:
fastboot flash recovery recovery.img
IMPORTANT! Navigate to "reboot to emergency recovery mode". Do not use
Code:
fastboot reboot recovery
as it might not work correctly!
I found disconnecting the device from USB to be more reliable, so do that for stability
If it gets stuck, repeat steps 1 and 4. No need to reflash, just be patient
Language will be Chinese, so change that by using the settings button (second from below on the right)
That's it, you have a working TWRP now Enjoy!
EDIT: DO NOT TRY FLASHING MAGISK AS IT WILL DAMAGE DM-VERITY AND YOU'LL HAVE TO BOOT RESCUE YOUR DEVICE! YOU CAN USE MY recovery script in the bloat remover thread to fix your device
In case you get stuck in a bootloop, repeat the installation guide, then use
Code:
adb push stock.zip /data/media/0
and reflash stock firmware as a last resort until a custom ROM is available.
All credit for this goes to youyim123 and his amazing work! I know he struggled releasing this because his work is often used or redirected without his consent or giving him credit, so I'm grateful he decided to release it.
Click to expand...
Click to collapse
any news update about stable TWRP for Z18. I have Z18, a very beautiful and strong device

md07 said:
any news update about stable TWRP for Z18. I have Z18, a very beautiful and strong device
Click to expand...
Click to collapse
It is stable. Just make sure to unplug your phone after flashing it as otherwise it will probably get stuck after a few seconds. If you need to have your device connected to your pc, do the following:
Start adb sideload in TWRP, connect your phone to your pc, stop sideload. That way you have a working connection with adb again
Hope this helps!

curtisy said:
It is stable. Just make sure to unplug your phone after flashing it as otherwise it will probably get stuck after a few seconds. If you need to have your device connected to your pc, do the following:
Start adb sideload in TWRP, connect your phone to your pc, stop sideload. That way you have a working connection with adb again
Hope this helps!
Click to expand...
Click to collapse
i read somewhere in Nubia forums (chinese language), some dev is going to release TWRP for Z18, but it need poll to decide.
So that, i dont know this version on XDA is official or unofficial ? And as you said, if it is stable, so can i flash Gaap package to get full Goolge and service for Z18? have you tried ?

Already try few weeks ago, not working...!
The only temperary solution is "Google Space", or just wait for the global version release
As one Dev which working on LOS fot this machine point out that Lineage is very hard to compile since there's no other Dev help him, the System is block by something call AVB2...pretty ironic as this twrp not even let us using Magisk at all!
md07 said:
i read somewhere in Nubia forums (chinese language), some dev is going to release TWRP for Z18, but it need poll to decide.
So that, i dont know this version on XDA is official or unofficial ? And as you said, if it is stable, so can i flash Gaap package to get full Goolge and service for Z18? have you tried ?
Click to expand...
Click to collapse

sky104hk said:
Already try few weeks ago, not working...!
The only temperary solution is "Google Space", or just wait for the global version release
As one Dev which working on LOS fot this machine point out that Lineage is very hard to compile since there's no other Dev help him, the System is block by something call AVB2...pretty ironic as this twrp not even let us using Magisk at all!
Click to expand...
Click to collapse
I tried Gplay space. But all app installed from there seem work slowly and not appear on home screen (must go Gplay space and run app)

md07 said:
i read somewhere in Nubia forums (chinese language), some dev is going to release TWRP for Z18, but it need poll to decide.
So that, i dont know this version on XDA is official or unofficial ? And as you said, if it is stable, so can i flash Gaap package to get full Goolge and service for Z18? have you tried ?
Click to expand...
Click to collapse
Please read the first post precisely and then the post in the nubia forum again. Youyim is the guy who made the poll and he made it public. I simply brought it to a wider audience and link to his official GitHub for the img.
You cannot flash Gapps with this because it errors. I said so a couple of times before and would appreciate a bit of effort reading before asking. You probably spent more time on writing this than you would've reading the first three post entries here, disregarding the fact that I'm trying to reply in detail. It's all in the first post, please read that before asking next time..
To sum up:
- It's the "official" TWRP from youyim, all credit goes to him
- You can not install Gapps with this, I haven't found a resolution for this but am working on an alternative. See my other thread or post #3 here

sky104hk said:
Already try few weeks ago, not working...!
The only temperary solution is "Google Space", or just wait for the global version release
As one Dev which working on LOS fot this machine point out that Lineage is very hard to compile since there's no other Dev help him, the System is block by something call AVB2...pretty ironic as this twrp not even let us using Magisk at all!
Click to expand...
Click to collapse
It's the same dev I'm the guy working on LineageOS as well and yes AVB2 (Basically think of it as Android's answer to secure boot on Computers) is a pain in the a** to deal with. Compiling itself is rather easy compared to the pain that comes after it, it's just killing lots of time and I unfortunately don't have that with a full time job. That's why I tried getting more people involved but (again) failed apparently.
TWRP doesn't have anything to do with Magisk either. Magisk is modifying the boot partition as far as I'm aware (don't hate me topjohnwu) and it relies on either no AVB/DM-Verity or a flag that doesn't work here either. TWRP in contrast just modifies/overrides the boot partition and is (mostly) used to flash many things including Magisk.

I think Z18 not have a global version, so we'll never see international firmware for this product. The only way I hope is some one or some dev support official method for install Google. And hope good news come soon.
Thanks all!

md07 said:
I think Z18 not have a global version, so we'll never see international firmware for this product. The only way I hope is some one or some dev support official method for install Google. And hope good news come soon.
Thanks all!
Click to expand...
Click to collapse
Isn't a global release coming in like 2 weeks or something? At least that's what I read last time I checked
I can tell you an official method. Root your phone and rewrite google services to system. Otherwise wait until developers can take a look at Rom building like I do now or even better, get involved. Being a one man show isn't helping the cause even if you have a couple spectators because it makes you feel more or less like a monkey in a cage

curtisy said:
Isn't a global release coming in like 2 weeks or something? At least that's what I read last time I checked
I can tell you an official method. Root your phone and rewrite google services to system. Otherwise wait until developers can take a look at Rom building like I do now or even better, get involved. Being a one man show isn't helping the cause even if you have a couple spectators because it makes you feel more or less like a monkey in a cage
Click to expand...
Click to collapse
Where did you read about global version Z18??? I checked only on Nubia website, in some global region (like India...) they are only going to release global Red Magic Mars.
I know method get Google and service by rooted and I read in Nubia forums they released tool to root current Version Z18, but I can not download

md07 said:
Where did you read about global version Z18??? I checked only on Nubia website, in some global region (like India...) they are only going to release global Red Magic Mars.
I know method get Google and service by rooted and I read in Nubia forums they released tool to root current Version Z18, but I can not download
Click to expand...
Click to collapse
https://www.gadgetsnow.com/mobile-phones/Nubia-Z18 for instance. India isn't global lol. They mostly just buy masses of phones and then resell. And yeah I can understand they won't release a global version anytime soon. The phone is great but looking at the source code, it's horrible. I even had to submit a patch so they get their build fixed!
As for the download, try the second one. Baidu is blocking anything non China by now afaik. It will also be included in the LineageOS ROM whenever I'll get that done..

Question How to solve the TWRP Problem for S22 Ultra?

Hi Everyone,
So as I read in a little bit about the S22 Ultra and its Progress to be a usable Phone... wich means for me/us to have TWRP, ROOT, Custom Kernel & Custom Mods etc etc.
I want to push it a little bit and use this thread for communication about TWRP and how to possibly find a solution to this problem
and maybe our hero developers go together and solve this Problem for the Community.
The next critical Step would be to have TWRP on S22 Ultra & Android 12.
So I think the closest we can get to it is to use the source Code and KnowHow from the S21 Ultra.
Here is the source code of TWRP:
GitHub - TeamWin/android_bootable_recovery
Contribute to TeamWin/android_bootable_recovery development by creating an account on GitHub.
github.com
And here is the Main Thread of TWRP from S21 Ultra
[RECOVERY][UNOFFICIAL] TWRP for Galaxy S21 Ultra (Exynos)
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and...
forum.xda-developers.com
Probably this is the closest we got so far and possibly from there its the best way to go.
Maybe he just needs to get an S22 Ultra to help us?
The https://TWRP.me Team seems to be inactive sadly.. may they would continue with some donations?
Who is in Contact with the Developers and have some Knowhow about it? Please connect & share.
Also I heard about an Option, that it would be possible to get custom roms throught Magisk installed.
Iam not a developer, but a Power User, so I hope you Pro Developers can create a Solution for the Community throught that.
here is a nice Guide for installing magisk on S22 Ultra:
Guide to root Galaxy S22 Ultra (B/E/N/0), unlock bootloader and flash official firmware (noob friendly)
Your warranty is now void. If you root your device, Your KNOX status will be tripped. You can still pass the safety net after you root if you follow the instructions. Sorry for USA models, you can't root unless you can unlock your bootloader You...
forum.xda-developers.com
&
Root Samsung Galaxy S22/S22+/S22 Ultra using Magisk [No TWRP Required]
This guide is going to show you how to Root Samsung S22/ S22 Plus/ S22 Ultra without the need for TWRP recovery or any other custom recovery. So if you
magiskapp.com
If you can contribute anything or have some useful information, here is the thread for now.
Wish us all the best.
Lets go.
|||||

afaneh92​already working on it, Indeed it's already installed on my device but yet needs to fix major bugs before public release. He don't have device so getting little longer, keep patience and wait till it gets public. We some users already donated and surely it will faster development if more users will support him to get update his device

Thats great News. Thanks for the Info.
So I will donate as well
Whoever reads this and also wants to use TWRP and all the great Features coming with it, should consider to donate as well. Everything good is paid these days, so why not support the hard work of developers?

Here is one more thing - wich could be useful for the developement
Samsung Hacked and bootloader source code stolen. | XDA Forums
Can't wait to finally unpack my phone - only using it when we have everything!

dr.ketan said:
afaneh92​already working on it, Indeed it's already installed on my device but yet needs to fix major bugs before public release. He don't have device so getting little longer, keep patience and wait till it gets public. We some users already donated and surely it will faster development if more users will support him to get update his device
Click to expand...
Click to collapse
If you want testers for TWRP, let me know. Am already rooted.

Any news?

No..

Any news?

dantist_140 said:
Any news?
Click to expand...
Click to collapse
no

There an chinese twrp out for snapdragons

NisseGurra said:
There an chinese twrp out for snapdragons
Click to expand...
Click to collapse
Link please

the creator asked me to delete his post here

stszf9124 said:
View attachment 5585623
original post: http://aurorarom.cn/archives/631.html
you can download from the 4 links above , the language is Chinese as default and can be swithched to others, suggest 189, which doesn't need an account
Click to expand...
Click to collapse
Just uploading the file to Mega:
File on MEGA
mega.nz

For me didnt work, vbmeta is for other build avc9 if im not mistaken for S908O

marquelito said:
For me didnt work, vbmeta is for other build avc9 if im not mistaken for S908O
Click to expand...
Click to collapse
Worked for me. Remove vbmeta from tar file. assumes you have installed vbmeta disabler during rooting.

gcrutchr said:
Worked for me. Remove vbmeta from tar file. assumes you have installed vbmeta disabler during rooting.
Click to expand...
Click to collapse
If you are on stock ROM, what functions of TWRP working?

dr.ketan said:
If you are on stock ROM, what functions of TWRP working?
Click to expand...
Click to collapse
Not on stock. Had Magisk installed before TWRP. have not fully tested yet. am in process of wiping data so language will stick and I can browse folders. Will update after fully set up.

gcrutchr said:
Not on stock. Had Magisk installed before TWRP. have not fully tested yet. am in process of wiping data so language will stick and I can browse folders. Will update after fully set up.
Click to expand...
Click to collapse
Of course stock means stock rooted. What I mean if you are on aurora ROM then it's different matter,
What I am eager to know is after wiping data, -
Do you ablet to make data backup or any other partition backup.
DO you able to apply multidisable or not. If not then still able to boot device after wiping data.

dr.ketan said:
Of course stock means stock rooted. What I mean if you are on aurora ROM then it's different matter,
What I am eager to know is know after wiping data, -
Do you ablet to make data backup or any other partition backup.
DO you able to apply multidisable or not. If not then still able to boot device after wiping data.
Click to expand...
Click to collapse
Am on Samsung S908E-AVCJ. Currently cannot get phone to boot. I think multidisabler_Samsung_3.1 or vbmeta_disabler need to be modified.

gcrutchr said:
Am on Samsung S908E-AVCJ. Currently cannot get phone to boot. I think multidisabler_Samsung_3.1 or vbmeta_disabler need to be modified.
Click to expand...
Click to collapse
And that can't modify vender (multidisabler) unless you flash ext4 images of super
Vbmeta already get patched with magisk by patching AP, nothing more needed