Related
ROM Ipioneer Slim 10c v0.1
A light, clean & faster rom!!!
Disclaimer:
/***
* Your warranty is now void (and I'm sure it was void before this process).
* I am not responsible for hard or soft bricked devices, boot loops, dead or corrupt sd cards, strange behavior or you getting a heart attack 'cuz your youtube app is not working properly.
* YOU and only YOU are choosing to make these modifications, do not blame on me.... I will just ignore you.
***/
iPioneer Slim 10c v0.1 is a light, clean and fast custom rom designed for the Lg G Pad X 8.0 (T-Mobile variant only) and it's aim is to become a replacement for the default system of this device.
iPioneer Slim 10c v0.1 it is light because it only takes 519.8Mb of disk space which is a big difference when you compare the 1.2Gb of a stock rom, it is clean because it only contains the essential apps to make it work properly and it is faster because the whole system have been 100% optimized.
iPioneer it have been designed with the User Freedom in mind, it only provides you with the basic OS so you can do what you need to do on top of that.
Features:
Based on stock (10c)
Rooted
Busyboxed
Init.d Support
Extremely debloated (very serious)
Deodexed
Zipaligned
Nova as default launcher
Installation instructions:
Download the rom to your desire location (link to download to the end of this post).
Boot into Twrp recovery and do a standard wipe (factory reset).
Install the downloaded rom .zip.
Reboot the device.
Be patient, is going to take more time than a regular stock rom to boot into the system, at first is going to be stuck at T-Mobile logo but after few seconds is going to enter into App Optimization mode and after that you will be able to setup your system.
Enjoy it.
First things to do after you install this rom:
Add your google account (if you didn't complete that step at the first setup).
Download your favorite app manager (Rom Toolbox, Titanium, etc.).
Freeze the application called App Updates in order to stop the system update beacon for OTA. I removed 3 core apps in order to stop OTAs but it seems to be very integrated with the system, there is no way I can remove it from the rom without breaking the system. This is the most practical way to my knowledge right now.
Optionals things to do after you install this rom:
You can uninstall Nova Launcher if you want as is not part of the system apps, but before you need to install your favorite launcher. If you don't install another launcher and remove Nova you will have a broken system and most likely you'll have to re-flash the rom.
On purpose bugs and missing options:
On purpose bugs are bugs that comes when you remove a functionality from the system but it can not be removed from a third party component, example: LG VPN app it has been removed but the options remains in the Settings of the device and when you tap that option you will provoke a crash event, the way to resolve this is to decode the third party component (very difficult) or reinstall the missing part (in this case the LG VPN app).
iPioneer Slim 0.1 it comes without some apps that can not be removed from the system setting options, this is like that because I believe that these apps are not necessary for all people, if someone need them they can be downloaded/replaced from the Play Store or I will provide a flashable file with these apps so you can install them.
On Purpose bugs (located at settings):
From the Share & Connect menu:
File Sharing that contains BLE and Android Beam doesn't work, package SmartShare it has been removed.
Media Server (DLNA) doesn't work, package SmartShare that also contains SmartShare.MediaServer it has been removed.
Lg Airdrive doesn't work, package LGAirDrive & LGAirDriveSettings were removed.
From More>VPN menu:
LG VPN doesn't work, package VpnClient_LG it has been removed. Basic VPN it works.
From Display menu:
Home screen doesn't work, packages LGHome, HomeSelector, LGHome_Theme_Optimus, com.lge.launcher3, com.lge.launcher2.theme.optimus were removed.
If you need these options to be available on your system just download these app on Play Store if they are available or just wait until I have ready the System Apps flashable zips.
Missing options (located at settings):
Smart Cleaning not present, package LGSpringCleaning it has been removed.
Cloud (cloud integration in settings) not present, package CloudHub (maybe dependant on SmartShare package) it has been removed, please also note that this cloud integration it was integrated on the stock File Manager, so... if you want a full integration of the Cloud service on settings maybe you will have to install the stock File Manager provided by LGFileManager package.
From Backup & reset menu:
LG Backup is not present, packages LGBackupLauncher and LGBackup were removed.
From About tablet menu:
Update Center and its content (App updates & System updates) is not present, packages com.lge.appbox.client (app updates), com.lge.updatecenter & LGUpdateCenter (main menu for updates) were removed.
If you need these options to be available on your system just download these app on Play Store if they are available or just wait until I have ready the System Apps flashable zips.Flashable zip with system apps:
Coming soon when I have a free time.
What to do if you get the OTA notification:
Freeze the app called App Updates with your favorite app manager.
With your favorite file manager go to /cache and delete the update.zip (the downloaded ota).
Tap on Restart & Install button on OTA pop-up, the pop-up it will start counting to 0 in order to restart but your device won't restart because there are 3 core apps removed from this rom plus 1 app that you just disabled (all these 4 app controls the OTA), the notification is just gonna disappear, push recent button and clear the ota pop-up window.
Bugs Report:
If you find a bug in this rom just notify me about that in this thread, please, just use the title as "Bug Report" so I can pay close attention to that, my time is very limited. Thank you.
Feature Request:
If you want a feature to be added into future revisions of this rom just notify me about that in this thread, please, just use the title as "Feature Request" so I can pay close attention to that, my time is very limited. Thank you.
More info:
-------------------------------------
Device: Lg G Pad X 8.0
Model: LGV521
Code Name: b3
Carrier: T-Mobile
Android version: 6.0.1
Security patch level: 2016-07-01
Software version: V52110c
Link: https://www.androidfilehost.com/?fid=385035244224403624
Screenshots:
Default View: (sorry guys, I was not able fix Nova in order to show an organized and clean layout by default).
Default App Drawer: remember this is an extremely debloated rom, only the most basic core apps remains.
Settings view, yes some options are not present, read above about this.
Software info.
Reserved 2...
For some reason this post doesn't show up on ET page: lg-g-padx
Too bad, a lot of people won't be able to see this rom, but I can do nothing.
If someone knows an admin who can fix this issue please make mention of this post to him. I would do it but I don't have the time to.
Thank you.
Some screenshots added on post #2...
How fast does it run compared to the stock rom?
Munns86 said:
How fast does it run compared to the stock rom?
Click to expand...
Click to collapse
How fast it can go is a subjective matter:
It will depend on hardware lifetime span (how you use it and how other people use this tablet).
It will depend how much apps and content you put in it (the more things you download the more slow android is gonna be, this is kind a Swap area).
I did not do a benchmark, when I declared that is faster than a stock rom is because that speed response enhacement it comes based on the Deodex and Zipalign process. It can be or maybe not noticeable to your eyes but based on deodex and zipalign process is for sure that is faster than an odex and not-zipaligned rom.
The best answer is that you need to try it on your own and see the difference.
Sent from my LG-H918 using Tapatalk
Poll added at the beginning (not visible in tapatalk or xda app).
Please only select the apps that you really need or you really think that should comes with the next revision of iPioneer Slim rom.
This will help me to build a better version with features that users needs.
C'mon guys... only 3 users have use the poll...
I need more data background in order to release a new version of the Slim line version (may be the last one).
All V521 users please contribute with this.
Right now I'm testing a new build that it seems to have success stoping ota download and notification & I have removed even more bloat background packages.
As of today I start the syncing process of CyanogenMod for our device, so all I ask is that V521 users vote in the poll so I can build and release what I think it would be the last Slim version (iPioneer Slim 0.2) based on users needs.
Once I start the developtment with CM I will not pay attentions to the Stock & Slim version until I finish with what is gonna become iPioneer CM 13.
Thank you for your attention guys.
BTW: sorry for my english, I try so hard to write all this in a good way. Arriba Mexico Papa!!!
xtremelora said:
C'mon guys... only 3 users have use the poll...
I need more data background in order to release a new version of the Slim line version (may be the last one).
All V521 users please contribute with this.
Right now I'm testing a new build that it seems to have success stoping ota download and notification & I have removed even more bloat background packages.
As of today I start the syncing process of CyanogenMod for our device, so all I ask is that V521 users vote in the poll so I can build and release what I think it would be the last Slim version (iPioneer Slim 0.2) based on users needs.
Once I start the developtment with CM I will not pay attentions to the Stock & Slim version until I finish with what is gonna become iPioneer CM 13.
Thank you for your attention guys.
BTW: sorry for my english, I try so hard to write all this in a good way. Arriba Mexico Papa!!!
Click to expand...
Click to collapse
The reason is that the xda app can't see the vote going on.
Personally, I will be excited to see a cm/aosp custom build, which will sure draw much more attention.
googlephone said:
The reason is that the xda app can't see the vote going on.
Click to expand...
Click to collapse
But it is visible and operable through a normal web browser in android: http://forum.xda-developers.com/lg-...ioneer-slim-0-1-lg-g-pad-x-8-0-t3513030/page1
Or the option LOAD IN BROWSER in xda app and WEB VIEW in tapatalk...
xtremelora said:
But it is visible and operable through a normal web browser in android: http://forum.xda-developers.com/lg-...ioneer-slim-0-1-lg-g-pad-x-8-0-t3513030/page1
Or the option LOAD IN BROWSER in xda app and WEB VIEW in tapatalk...
Click to expand...
Click to collapse
Another reason is not many users are interested enough in a slimmed stock rom. The benefits of a slimmed stock rom may include less system storage usage. But the free uped system storage is not accessible for users to use as data storage anyway. Speedwise, I wouldn't expect noticeable improvement from a slimmed stock rom. As a result, the benefits of a slimmed stock rom is not enough to draw users' attention or interest.
I am a flashholic but I actually not interested in slimmed stock at all because I already have root.
I personally advise you to not spend too much time on modified stock rom.
I appreciate your work and look forward to your future possible cm rom, which I will definitely try it out and will draw many g pad x users here. And don't forget there is a bounty for custom roms like cm.
googlephone said:
Another reason is not many users are interested enough in a slimmed stock rom. The benefits of a slimmed stock rom may include less system storage usage. But the free uped system storage is not accessible for users to use as data storage anyway. Speedwise, I wouldn't expect noticeable improvement from a slimmed stock rom. As a result, the benefits of a slimmed stock rom is not enough to draw users' attention or interest.
I am a flashholic but I actually not interested in slimmed stock at all because I already have root.
I personally advise you to not spend too much time on modified stock rom.
I appreciate your work and look forward to your future possible cm rom, which I will definitely try it out and will draw many g pad x users here. And don't forget there is a bounty for custom roms like cm.
Click to expand...
Click to collapse
You are right about working in a stock version. The reason why I'm doing this is because we all know that CM most of the time has bugs, bluetooh problems, camera issues, data conectivity troubles, etc...
Sooooo, if the version of CM I'm going to compile it results with many bugs there is gonna be the option to go back to stock slimed or stock bloated.
I can build a CM verion but Im not the kind of guy who inverts his time in CODE MODIFICATION, so hopefully the build it comes with no bugs at all or at least no major bugs.
The other alternative is that I can sync, compile and build and one more guys can do the bug fixes.
xtremelora said:
You are right about working in a stock version. The reason why I'm doing this is because we all know that CM most of the time has bugs, bluetooh problems, camera issues, data conectivity troubles, etc...
Sooooo, if the version of CM I'm going to compile it results with many bugs there is gonna be the option to go back to stock slimed or stock bloated.
I can build a CM verion but Im not the kind of guy who inverts his time in CODE MODIFICATION, so hopefully the build it comes with no bugs at all or at least no major bugs.
The other alternative is that I can sync, compile and build and one more guys can do the bug fixes.
Click to expand...
Click to collapse
That would be great! I think if you took a poll most people would prefer a CM build to a slimmed down stock build.
Munns86 said:
That would be great! I think if you took a poll most people would prefer a CM build to a slimmed down stock build.
Click to expand...
Click to collapse
Yeah, I know that. Wish me luck.
Right now I'm stuck trying to get the Blobs for this device and compiling the kernel so I can build the CM recovery, once I have the recovery done I can start compiling CM and start testing.
I'm trying to by pass the kernel (as is not need it right now to build the recovery) but for some reason the system is demanding an standard and working kernel... weird...
But honestly speaking is gonna take lot of time. So be patient guys.
xtremelora said:
Yeah, I know that. Wish me luck.
Right now I'm stuck trying to get the Blobs for this device and compiling the kernel so I can build the CM recovery, once I have the recovery done I can start compiling CM and start testing.
I'm trying to by pass the kernel (as is not need it right now to build the recovery) but for some reason the system is demanding an standard and working kernel... weird...
But honestly speaking is gonna take lot of time. So be patient guys.
Click to expand...
Click to collapse
There is already a TWRP recovery for v521. Why you need to compile cm recovery?
googlephone said:
There is already a TWRP recovery for v521. Why you need to compile cm recovery?
Click to expand...
Click to collapse
Ik, is just a prebuilt because our device doesnt have a device tree or structure already, so making this at first is gonna help me to buil the cm zip.
Is not need it if a device tree already exist but not in this case, just see it like a pretesting of code for this device.
When I try to compile this recovery things are gonna break so you get info of what is missing, what you need, log, etc... So you fix everything you can in this step and then you build the cm.zip in a better way (less issues).
Sent from my LG-H918 using Tapatalk
xtremelora said:
Ik, is just a prebuilt because our device doesnt have a device tree or structure already, so making this at first is gonna help me to buil the cm zip.
Is not need it if a device tree already exist but not in this case, just see it like a pretesting of code for this device.
When I try to compile this recovery things are gonna break so you get info of what is missing, what you need, log, etc... So you fix everything you can in this step and then you build the cm.zip in a better way (less issues).
Sent from my LG-H918 using Tapatalk
Click to expand...
Click to collapse
https://github.com/Shabbypenguin/android_device_lge_b3
device tree has been around for a while, it obviously will need some renaming to work for cm source but its a good foundation to start with.
shabbypenguin said:
https://github.com/Shabbypenguin/android_device_lge_b3
device tree has been around for a while, it obviously will need some renaming to work for cm source but its a good foundation to start with.
Click to expand...
Click to collapse
These are your device tree for twrp 4 b3 right?
Let me see if I can work with that, I was almost done building the cm.recovery and fixing some boot.img issues but if I can take your files that would save time.
Did you forked that device tree or u just build it from scratch?
If you forked them, from what device?
I was thinking on pulling the v500 just to figure out some sort of missing info I havent been able to catch from ramdisk.
xtremelora said:
These are your device tree for twrp 4 b3 right?
Let me see if I can work with that, I was almost done building the cm.recovery and fixing some boot.img issues but if I can take your files that would save time.
Did you forked that device tree or u just build it from scratch?
If you forked them, from what device?
I was thinking on pulling the v500 just to figure out some sort of missing info I havent been able to catch from ramdisk.
Click to expand...
Click to collapse
i built it from scratch, id be careful looking too much at the v500, it's a snapdragon 600 SOC which is very old and is a quad core. the 615 in the g pad x is octacore and much newer. even the ramdisk is going to have big differences in how its handled.
DEV DIGITEL PRESENTS
Stock 7.0 Magisk Debloated/Deodexed + Mods
Whats Included:
Magisk Version 13.xx <- Passes Safety-net As of 8/19/17
BusyBox Pre-built into system + Magisk Module
3minit Clock / 3minit Battery @OvrDriVE For spending the time to get the SystemUI Corrected!
Stock Htc Apps From HTC U11 : Gallery, Music, MMS, Htc Sense Home, Htc weather, Htc Clock , Internet, Camera
Shortcutter App Added - For endless quick tiles
SystemUI Tuner - Made by Local XDA Dev Zach
Hotspot Mod
****Many other tweaks etc, all Gplay apps and things that can be dl from google play were removed****
Before we move any further lets get this outta the way, I AM NOT LIABLE FOR WHAT MAY HAPPEN TO YOUR DEVICE, You remove my liability by proceeding any further and downloading / installing any software or mod developed by @Team DevDigitel. Worst Case, RUU back to stock and try again!
So 1st, always make a backup and be prepared to restore your device and possibly brick it. I am not liable for your device or the effects of this software, please use at your own risk. And feel free to report bugs and submit feedback as well as help resolve some issues we are working on!
STEPS
1) Unlock Bootloader - Go to HTC DEV SITE AND FOLLOW STEPS AND RETURN HERE ONCE UNLOCKED
2.) Flash the TWRP RECOVERY.img
Using fastboot while in bootloader mode
use command: "recovery.img is name of twrp recovery or rename to match"
Fastboot flash recovery recovery.img
3.) Make sure your using the newset twrp. No longer encryption issues!
4.) Go now to install in twrp and choose the rom.zip you downloaded and flash it to the device. After flash completes you need to reboot device and allow the 1st boot to complete. Due to being deodexed and 1st boot, this will take 5 - 10 minutes to complete just wait!
5.) Reboot and Enjoy and, Also dont forget to hit the Thanks button !!
ROM Downloads:
Revision 3 : DevDigitel_1.32.651.6_7.0R3
https://www.androidfilehost.com/?fid=817550096634793725
Twrp Recovery :
http://forum.xda-developers.com/bolt/development/recovery-twrp-touch-recovery-t3519304
This was built using the stock image that comes pre-loaded to the HTC BOLT
This was rebased; The Updated Rom is Based off Stock Version 1.32.651.6 De-odexed by Bad Boys Team
@OMJ Thank you for providing the necessary files and de-odexing for this base!
The device must be bootloader unlocked and TWRP recovery used to flash.
S-OFF is not required but recommended ( No radio included with this rom)
RUU to latest version 1st to obtain latest radios without S-OFF
Please do not redistribute my work without giving proper credits to all involved as well as asking permission to host such work 1st! Thanks!
Contributors:
@OMJ - General Help + Newest Base for Rom.
@OvrDriVE - Smali / xml files related to SystemUI mods / General Support
@topjohnwu - magisk
@Captain_Throwback -twrp , root
@Chainfire - root[/CENTER]
Reserved
Reserved
Is this build of TWRP fully working? I only ask because the other 2 builds up until now have had certain things broken...
bdizzle1686 said:
Is this build of TWRP fully working? I only ask because the other 2 builds up until now have had certain things broken...
Click to expand...
Click to collapse
This twrp does not decrypt htc encryption still.
while using the decrypted boot.img it can access all features
backup/restore etc.
using on a encrypted storage will not work still. atleast until captain throwback comes back with the correct mods needed.
New link is up, located a few issues and removed them.
Boot.img was being pre-rooted and was causing a hang, no longer a issue.
The setup wizard has been removed, the default homescreen was cleaned, almost all bs apps are gone, ill update with a newer version here soon.
Just need to flash the su zip after first boot, the fingerprint and service issues shouldnt be present in this build anymore.
old system size was well over 12gb. Now it's at a healthy 8gb debloated.. What a difference.
delete please
Is hot-spot unlocked?
Revived for any Htc bolt users out there, ill update some good screenshots here in a few!!
Hope this helps someone out!! Hit the Thanks on OP if it did!!
Screenshots added to the Post / Pay attention to status bar, I made sure to include some with 3Minit battery options and different locations.
Re-uploading Rom with some apps moved to User-data instead of System/App; Cleaning up scripts and removing dead directories.
htc themes account
htc themes account not working..not updating either not installing after 19/8/17 update
How can i deal with the problem of getting hot on my phone?:crying:htc 10 evo
stream1027 said:
How can i deal with the problem of getting hot on my phone?:crying:htc 10 evo
Click to expand...
Click to collapse
a lot of it has to do with the design of the phone being its metal. Unfortunately its not something im able to deture much. You could reduce temps some by under-clocking the processor or reducing the amount of use the processor is going through, kernel auditor or similar apps give you the ability to scale back the cpu, but you will take a performance hit doing so. A case at least removes some of the heat transfer to your hands but inst much of a "fix"
does this rom have radio
adnanagha said:
htc themes account not working..not updating either not installing after 19/8/17 update
Click to expand...
Click to collapse
has there been a fix for this i am having the same problem
also have been having trouble with certain apps crashing on my htc bolt
Can I use hot-spot freely with this?
Sent from my 2PYB2 using Tapatalk
This rom has band 8 activated?
this rom work on htc 10 evo ??
October release is available with or without root
Made a few changes as far as adding in some apk's to hopefully make it stable for everyone.
Besides that, the usual with normal default font BUT lots more choices in the font section.
Enjoy!
*if anyone has solid reasons to remove any apk files i've put back please let me know as some I should not have been removing and others... not so sure
I will no longer be able to provide new copies of this after the October security patch. I no longer own an A8 2018 and without a device to test the work, I do not feel it is appropriate to continue the project. I'd like to thank everyone that participated and I hope you enjoyed using it! If anything changes in the future that will allow me to provide the latest edited firmware, I will definitely be providing it here for you. I am using an S7 now so if you own one and like this work, there shall be downloads available there similar to this one. (Already testing).
Anyone that would like to continue on their own or have access to files used in making it I will try to include as much as possible from the link provided below by the end of October. There is currently a slightly outdated set of files and instructions (from June I believe) on how I made it already available.
Thanks Again!
Oct Security patch zip ready for download
Available with or without root AND with or without exo font - also an attempt to allow printing feature version. "Attempt" meaning I've placed a set of apk files into a separate and clearly labelled zip on the main download page that may allow proper use of the feature which has not been validated as operational by me or any other user. The "print fix" zip is rooted with exo font
This was made ONLY for the SM-A530W! Please do not use if not W (Canadian) variant. Check your phone info before attempting to flash
All ROMS/extras here:
https://drive.google.com/drive/folders/12Vwzn1CxNdT-ISsrOnSL4D353Nr14iRb?usp=sharing
The ROM will function very well and does not require any special patches, kernels, etc except obviously TWRP
Any additional issues you face with added mods most likely will need to be addressed with the creator
*Built by Superr's Kitchen*
Over 100 apps removed
***Find my mobile and pop-up asking to store lockscreen info removed- BE AWARE reduced ability to locate lost device!***
retro shutdown qmg
Overloaded notifications and ringtones
Oreo Weather (pie weather is a serious downgrade)
August Security release
FM tuner and App Lock (Next Radio may now be used starting from July 2019). Gee, THANKS SAMMY! What took you so long? Was it the polar bears?
Goofy selfie stickers that are funny... and creepy *big thanks to hadesRom genius Corsicanu for the find*
Other typical CSC changes
If your plan has wifi calling, turn it on/off once in phone settings to "break in" the qs tile
Dedicated Screen Recorder access in launcher with no shortcut style appearance (if deleted may be re-enabled with activity launcher as shortcut)
Chrome can be safely disabled at any time if desired and auto replaced with system webview
dm-verity + force encrypt already removed
Magisk rooted
Installation is easy as pie
BACK UP FIRST!
Wipe caches, data, system. Internal may be safely wiped and give the "freshest" install but is optional. Then flash away.
Once flash completes, just reboot.
-*Usage*-
You are free to use any ideas/changes included in the zip. In fact, I encourage you to do so. I've mostly pieced together work from other very difficult projects to create this. Nobody has asked me to add, remove or alter anything contained within this page or in shared downloads. Their work is everywhere and it's what made this possible.
Built with Superr's Kitchen
Some screens to sample below. yay
nobody home
empty
I followed your instructions. I was already updated to pie previous to flashing your rom. I am not able to get root. Any ideas why. I also have the Canadian version. Good job on the Rom, I like it. I wish I could get root.
Ok. I can't really suggest anything other than the obvious.
But you've let it boot once before trying, and are adding the apk as well after flashing magisk in twrp?
Hard to figure that one out. If you're using Magisk, i am assuming.
burnt_31 said:
I followed your instructions. I was already updated to pie previous to flashing your rom. I am not able to get root. Any ideas why. I also have the Canadian version. Good job on the Rom, I like it. I wish I could get root.
Click to expand...
Click to collapse
Have you tried 19.1 you may need to flash twice.
I used magisk 19.1. First I used supersu and magisk uninstaller first. I have root now. Thanks for your help. It amazes me that sometime we over look the simplest thing.
burnt_31 said:
I used magisk 19.1. First I used supersu and magisk uninstaller first. I have root now. Thanks for your help. It amazes me that sometime we over look the simplest thing.
Click to expand...
Click to collapse
I know exactly what you mean. I do it all the time.
Nice you got it going. It's pretty lame if you don't root this. I just cut it up and added a couple things and they can be taken out, except radio and the recorder.
Curious if i got it right. If you're on anything other than VMC, is call recording and other micro features working? All the cscfeature xml files are decrypted so you can see what was done.
Everything seems to be working. I appreciate the work, Canadians are usually the last to get Roms. Most are made for the sm-a530f model. I was using the wrong method. One post said about waiting 166 hrs to reboot your phone after zipping RMM_State Bypass etc. etc.. Your way is simple. Once I get a chance I wlll have a look at what you have done, I work long hours. And as you said, what is the point if you cant root. Thanks again.
burnt_31 said:
Everything seems to be working. I appreciate the work, Canadians are usually the last to get Roms. Most are made for the sm-a530f model. I was using the wrong method. One post said about waiting 166 hrs to reboot your phone after zipping RMM_State Bypass etc. etc.. Your way is simple. Once I get a chance I wlll have a look at what you have done, I work long hours. And as you said, what is the point if you cant root. Thanks again.
Click to expand...
Click to collapse
It is 168 hours no reboots and rmm did work that rmm was for Oreo.
I think his would be fine but no guarantees.
Custom kernel 2.0 flash twice.
Light rom works without issue make sure you flash magisk.
Hello I have a530f model with lastest pie version for Russia. I would like to install native screen recorder. Can yo help me ? Please. My email is [email protected]. thanks
fabian_barrios said:
Hello I have a530f model with lastest pie version for Russia. I would like to install native screen recorder. Can yo help me ? Please. My email is [email protected]. thanks
Click to expand...
Click to collapse
Yeah bud. If you unzip the attached file, you can place it in /system/priv-app/ and make sure the permissions are set correctly for the folder and apk. Compare with other apps in the directoty and make it the same.
Then get the activity launcher app from the play store. Use that to make a link for it.
Getting random freezes sometimes, have to reboot phone using hardware buttons. Using Freedom A8
boominboodhoo said:
Getting random freezes sometimes, have to reboot phone using hardware buttons. Using Freedom A8
Click to expand...
Click to collapse
okay thanks for that. It is probably from my csc edits. I can adjust for freedom and hope it makes a difference.
Anything else to mention about it? What you did before flashing, are you using latest twrp, root or non root.... anything at all
no-verity... favourite snack... p.i.n. number(s)... oops sorry not the last two. My mistake. TOO MUCH info. Disregard.
Do a search on xda for rooting your model for the correct version of twrp. U will need no verify no encript. I used the latest Magisk to root. Supersu did not work. I used twrp for the A8 plus and had problems. Get the right one. It's a great rom. https://www.google.com/amp/s/forum....ery-twrp-3-2-2-0-galaxy-a8-2018-t3818201/amp/
I am looking at the csc for FMC and it appears i have doubled an entry. I need to go over all of them to see if i've done it elsewhere. I will have 2 updated ones hopefully late tonight. (Takes forever to upload).
Not sure if that is the cause but i will definitely adjust it.
Quick question in regards to your Rom. I been using it for a while now. Its the best one I can find, I did post a few times at the start. By any chance, did u get adoptable storage working? I know Samsung removed it in Pie. I tried root essentials but still no luck. Thus is not my first time rooting or installing roms. I started with the HTC 1. Lol. So far, u have the best rom for the A8 2018. Its nice and clean. Almost compares with lineage in my opinion. Thanks again. And by the way, I am Canadian.
Thanks
Hey i appreciate the gesture but even though i "made" this, i did it because of other people. SuperR is an invaluable tool. Then you got magisk, the twrp recovery and heck even give ol' Sammy some credit, haha. All i did was spend time learning everything from this site. I can't stress that enough. I still have not paid for superR and i am going to see how i can right after this.
ANYWAY!
Your question. I've never attempted it but i am very certain there's a magisk module that'll do it.
It involved formatting sd to ext 4 or 3. So i will get on it. Got a few 64 gig cards to spare. If you have a computer, grab the superR linux distro. I've run it on 32 bit machines. K... pay superr... adopt a card heheh.
I will look again in the magisk module section. And I give everybody right now credit for all their hard work and sharing it amongst all of us. Thank you. Thank you. I love modding my phones and I could not do it without everybody's help. All my PC's are 64bit.
Nice. If you need any help just ask. Just bought the kitchen.
I'll have something very soon. Mexico's pie has the classic csc folder of old. I think we should unify with some fiesta pie zip ui sorta thingy... um rom.
NcX S8+ PortSo I'm finally sharing this ROM lol.
A lot of the people that are in my Telegram group already knew about this ROM from long ago. I just felt lazy to upload it to xda. And now I feel bad about it xD
Because if I do say so myself, it is my best work.
Yes, it's still Oreo. Right now, porting Pie to Pie seems to be difficult-impossible due to some deodexing stuff and such, son don't expect me to try to port anything related to Pie (specially because I am not a huge fan over OneUI. I'd take Samsung Experience's looks over it any day
Well, with that said. Here is what you can expect from this ROM
Code:
Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about flashing this zip file
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. HARD!
Features!
Fully ported S8+ ROM
Deodexed
Heavily debloated
Zipaligned
Very Optimized
Bike Mode
Aroma installer (Very few features at the moment)
Multiple kernels
Modded Screen record
Floating Messages
Scroll Capture
Edge Panels
Edge Lighting
Native blur
Pop-off multi-window for more than 2 windows at the same time
Smart select
Dolby Atmos
Bixby Vision in screenshots and camera
Fixed smart view and mobile hotspot (thanks to @ananjaser1211)
Secure Folder (Flash the zip here and read instructions to enable it: Secure Folder Fix)
And stock J6 stuff
Bugs!
It's been so long since I created this ROM I honestly forgot what small issues this ROM had, but I don't remember anything major. Please report if you find anything
Changelog!
21/06/19: Release
Links!Google Drive
Secure Folder Fix
Instructions!-Create full backup before trying
-Wipe system, data, cache and dalvik
-Install ZIP via TWRP
-Select either Phoenix kernel or stock kernel with Magisk ONLY
-If you want to use Oxygen Kernel, you have to install stock kernel first and let it boot for the first time. Then, do a dirty flash and select Oxygen Kernel and it will boot
-Let it boot for aprox 20 minutes
-Once booted, select language in start up screen and reboot the phone twice
This is done to remove lag due to being rooted with Magisk
-Complete setup
Credits!@ananjaser1211 for all your help on fixing bugs and words of encouragement.
@malbert16442 For his tutorial on ROM porting which you can find here: https://forum.xda-developers.com/an...to-samsung-t3481114/post69145910#post69145910
@SuperR. For his Super R's Kitchen which you can find here: https://forum.xda-developers.com/ap...dows-linux-superr-s-kitchen-v3-0-0-0-t3601702
@topjohnwu for Magisk
@yash92duster For his thread and contributions to the Oreo modding scene. Check out this amazing thread: https://forum.xda-developers.com/android/general/guides-android-8-0-oreo-mods-thread-t3772017
@Grouxho For his tutorials and some MODs. I specially love the Free form from notification MOD he shared with us
@BlackMesa123 For his discoveries on RMM lock and his bypass zip. Read more about rmm here: https://forum.xda-developers.com/showpost.php?p=75360965
@DarkLord1731 For Oxygen kernel which you can download here (included in Aroma installer): Oxygen Kernel
@renoxtv For Phoenix kernel which you can download here (included in Aroma installer): Phoenix Kernel
@ Samsung for the firmware
@ Team TWRP for their amazing recovery
@ To users like you!
If you feel I missed you, please give me a PM so I can add you
XDA:DevDB Information
NcX S8+ Oreo Port, ROM for the Samsung Galaxy J
Contributors
ShaDisNX255, ananjaser1211, renoxtv
Source Code: https://github.com/renoxtv/android_kernel_samsung_a6lte_exynos7870
ROM OS Version: 8.x Oreo
Based On: Samsung Experience
Version Information
Status: Stable
Stable Release Date: 2019-06-21
Created 2019-06-21
Last Updated 2019-06-21
FAQ
[Q] My phone is stuck in bootloop/infinite boot, what should I do?
[A] It is normal for first instalation to take aprox 10-20 minutes on first boot, let it sit for a little bit
[Q] Even after 20 minutes, my phone is still in a bootloop/infinite boot, what can I do?
[A] It is possible that your previoius Android setup is conflicting with this new setup. Please, do the following:
1. FORMAT DATA (not WIPE, FORMAT!)
2. Try the instalation of NcX again
[Q] My phone will still not boot, what is my last resort?
[A] Please do the following:
Re-install NcX
After installation finishes, select "Save Logs"
It will save a .txt file in your memory, please post so I can review your problem
[Q] I've found a bug, what should I do
[A] Please read the "Bugs" section of the thread to see if your bug has been reported, if it hasn't, please let me know exactly what the problem is so I can take a look
[Q] My phone isn't rooted, even though I selected a root method
[A] Please make sure you root via Magisk. SuperSU is only there for testing and did not work.
[Q] The phone is going way too slow!
[A] Caused by Magisk. Just reboot the phone 2 or 3 times and the lag will be gone forever.
[Q] Something bothers me and I want it fixed/changed
[A] Please, kindly make a request and if it's within my grasp, I'll try to fix it. Just, don't be rude and demand something. Either that or return to stock, your choice
Join our Telegram group
Code:
Check out the latest projects on our Telegram group, where we share our advancement on new things and try to help as best as we can.
For anything already released, please ask here in XDA
Link: Telegram Group
How to report a bug/Ask for a change
Over the small amount of time I've been doing my edits and shared them with the community, I've noticed something that seems to irritate me. I can't speak for all the developers on this forum, but I do edits/ROMs/PORTs/etc... to what I like. I don't work for anybody else but me. I share my work because it may have something of value to other people and/or some people may share the same taste as me on regards to what they want on a ROM.
That being said, that doesn't mean I will completely ignore what the community has to say.
First and foremost, it must be said, I am merely a beginner. I do not claim to be a professional developer that knows how to add everything, I am nowhere close and I learn as I go.
There are ways to ask for something and/or report a bug when it comes to ROMs, and this post is my attempt to try to explain how to (and how not to) report a bug in order to help me out as much as possible to try to fix something
You can also ask for something to be added, but there are also ways to ask for something
So, here we go
Keep in mind:
I do not add stuff that can easily be downloaded from the Playstore
I, myself, don't do kernel edits
I COULD remove stuff if NOBODY uses it
---REPORTING BUGS---
How NOT to report a bug:
"SystemUI (or any app)is crashing, please help!"
"Instagram doesn't allow me to edit my post, what could be wrong?"
"My bank account app is not letting me do such thing"
These posts are sort of pointless as they only state something but I have no context on what could be causing it. Also, I can't really control (for the most part) third-party apps, so if you're going to ask about them this way, don't even bother
A slightly better way to report a bug:
"I clean installed the ROM and was working fine, after I installed Facebook and logged in, I immediately uploaded a photo and SystemUI started to crash. Can you look in to it?"
"I tried to install Black Neon theme (a link to it would work as well) and it was working fine until I tried to activate AOD (or anything else for some reason) and SystemUI (or any other app) is crashing, could you look in to it?"
"My bank account app doesn't let me take a screenshot of my accounts. I get a toast notification saying "Can't take screenshot due to security policy"
As you can see, this provides a bit more context and explanation on your current situation. This gives me a little more detail on trying to replicate the problem and hopefully could fix it by replicating it. Well, except for point #3 which is out of my hands for the most part (I think). If you include what kernel you're using would make everything better! Also any significant change that would require root (like xposed and or anything that modifies /system also needs to be informed for better results)
The BEST way to report a bug:
LOGCAT!!!!!!!!!!!!!!!!!!
Please learn the ins and outs of a logcat, this really helps a lot on finding what the problem is. Also, please give a brief explanation as the above examples when providing a log cat
---ASKING FOR STUFF TO BE ADDED---
How NOT to ask for stuff:
On your next update, add iris scanner
You should add (app) on your next update
Hey, please add (app or feature) on your next update
No, I do not work for you. Even if you say please like the third example, that doesn't mean you're being polite. It still sounds like an order lol so you should probably rephrase your request.
How to ask for stuff to be added to my work:
Would you be so kind to add (feature) to your ROM, if possible?
Would it be possible to add this app to your ROM?
Please, can you add (feature) to your ROM, if it isn't much to ask?
See how politeness makes everything better? You're not demanding it, you're just politely asking to see if maybe it is within my grasp to add something. And if all request would be like this, I can assure you I'd try my best to add said feature
I hope this is useful to you or I at least hope that some people read it.
If not, I can just tell you to return to stock ROM, probably better than any ROM I put out anyway
Enjoy
ShaDisNX255 said:
Enjoy
Click to expand...
Click to collapse
Hi can u make aod work sir plis work hard sor
LOLZES said:
Hi can u make aod work sir plis work hard sor
Click to expand...
Click to collapse
Nope, I can't.
hello , are you sure bixby vision works on this rom ? because i can't make it work even on stock rom
Aleko91 said:
hello , are you sure bixby vision works on this rom ? because i can't make it work even on stock rom
Click to expand...
Click to collapse
Works fine, check the screenshots
selfie camera not working on j600f
Aleko91 said:
selfie camera not working on j600f
Click to expand...
Click to collapse
Just have to disable shape correction on the little stars icon in the bottom right of the camera.
ShaDisNX255 said:
Just have to disable shape correction on the little stars icon in the bottom right of the camera.
Click to expand...
Click to collapse
ok , thank you
Enable Secure Folder on NcX S8+
Hi guys, just here with a quick update.
For those unaware, there was a pretty cool breakthrough when it came to finally enabling Secure Folder on rooted software (Pie) in this thread:
https://forum.xda-developers.com/galaxy-note-8/development/secure-folder-patch-custom-rom-t3949878
(Would appreciate it if you visit and give thanks)
Now since then, I really wanted to fix it on Oreo but the methods were vastly different.
Thankfully, @khongloi113 helped me step by step to try and fix it for Oreo.
And that's exactly what he did, he fixed it for Oreo too
So, for those who want to enable Secure Folder on this ROM, flash the zip attached
For now, the fix is only available for this Oreo ROM, since there are some methods that khongloi113 changed that I have not been able to pin point.
Oh and, if it doesn't work for you, all you have to do is go to the Galaxy Store and update Secure Folder through there. Then it should work fine.
Enjoy!
Does this ROM work on J6+?
I tried here and it gets an error message saying that it cannot validate device tree table...
muringuets said:
Does this ROM work on J6+?
I tried here and it gets an error message saying that it cannot validate device tree table...
Click to expand...
Click to collapse
Of course it won't work on the J6+ it's a completely different device.
i dont understand anything how to install/use secure folder with that instruction ... can you make instruction easier way ? thanks
Aleko91 said:
i dont understand anything how to install/use secure folder with that instruction ... can you make instruction easier way ? thanks
Click to expand...
Click to collapse
All you have to do is flash the zip like if you were flashing a ROM, without wiping anything.
That's all you need to do
ShaDisNX255 said:
All you have to do is flash the zip like if you were flashing a ROM, without wiping anything.
That's all you need to do
Click to expand...
Click to collapse
thanks , and this works only for this rom or pie also ?
Aleko91 said:
thanks , and this works only for this rom or pie also ?
Click to expand...
Click to collapse
No, this zip only works for this ROM
ShaDisNX255 said:
No, this zip only works for this ROM
Click to expand...
Click to collapse
Hi sir, how can i make always on display work on your rom please sir hey sir
After many hours of trial and error, I now understand how to get RR and Lineage to boot with latest firmware updates. NO MORE BLINKING BLACK/GREY SCREEN!
Tested with Resurrection Remix 16.1 and Lineage 15.1 (Oreo)
Simply flash the boot and vendor images to their corresponding partitions using fastboot. Find the proper images from this Tmobile firmware,. https://androidfilehost.com/?fid=11410963190603878004 This method preserves IMEI and Baseband.
Nano/pico gapps work as well. HideProps magisk module can set your fingerprint to Moto E5 Play and get around that unregistered Google sh**. I edit /vendor/etc/fstab.qcom myself with vi and inside TWRP terminal shortly after flashing vendor partition. I do this because zips and other copies held me up. All I change is forceencrypt to encryptable in the data line of the fstab. Magisk 19.3 patches for verity. Another thing I do is move /vendor/lib/libeffects.so to /vendor/lib/soundfx/libeffects.so. Doing this will keep music/audio from studdering when screen is off. Last thing, TWRP 3.3.1 formats data as ext4 by default. We want to format with f2fs or you get corrupted data messages at boot. Happy flashing!
##
I find the earliest of these metro pcs firms have a working vendor image.
https://mirrors.lolinet.com/firmware/moto/james/official/Metropcs/
I got bluetooth working today, and lots of clues where I found the fix...
####Bluetooth
Now that I can set it up from a clean install, here's the basics for Bluetooth...
You'll need files from the stock system image. You can use a backup to get these or also use simg2img with dd and 7zip, I'll make a zip installer when I have more time.
1. Copy the following files, from stock image directory "/system/etc/" to the "/vendor/etc/" directory on device
mixer_paths* (14 files)
audio_* (5 files)
media_profiles* (3 files)
Edit the file /system/etc/ld.config.26.txt
add this text to the very end of line 61 :/system/${LIB}/vnd-sp/hw
You're done! If you did everything as described, and it doesn't work, check the permissions of the files you add to vendor partition with other xml files in same directory. I did mine on the device while running, it worked in place, without rebooting device. The GSI system is new to me, however the "Same Proccess HAL(hardware abstraction layer)" voodoo can likely be configured correctly to fix screen and port other GSIs' to our device.
Any chance of getting lamens terms step by step instructions on how to do this? That is the model I have and really liked those roms when I tried unsuccessfully to make them work last year.
edit: 9/21 6pm
I think it's because mine is TMO variant.
Mattswad said:
Any chance of getting lamens terms step by step instructions on how to do this? That is the model I have and really liked those roms when I tried unsuccessfully to make them work last year.
Click to expand...
Click to collapse
Trying based on this now. I'll update you.. been trying for TOO LONG lol it's almost the same time you posted 2 days ago!
---------- Post added at 04:12 AM ---------- Previous post was at 03:45 AM ----------
I've been up all night trying to get either one to work.. I think I came close but I am stuck at a looping blank screen.
If you could step through a bit more for us? I'd REALLY love to have lineageOS on it.
mrbox23 said:
After many hours of trial and error, I now understand how to get RR and Lineage to boot with latest firmware updates. NO MORE BLINKING BLACK/GREY SCREEN!
Tested with Resurrection Remix 16.1 and Lineage 15.1 (Oreo)
Simply flash the boot and vendor images to their corresponding partitions using fastboot. Find the proper images from this Tmobile firmware,.
Nano/pico gapps work as well. HideProps magisk module can set your fingerprint to Moto E5 Play and get around that unregistered Google sh**. I edit /vendor/etc/fstab.qcom myself with vi and inside TWRP terminal shortly after flashing vendor partition. I do this because zips and other copies held me up. All I change is forceencrypt to encryptable in the data line of the fstab. Magisk 19.3 patches for verity. Another thing I do is move /vendor/lib/libeffects.so to /vendor/lib/soundfx/libeffects.so. Doing this will keep music/audio from studdering when screen is off. Last thing, TWRP 3.3.1 formats data as ext4 by default. We want to format with f2fs or you get corrupted data messages at boot. Happy flashing!
Click to expand...
Click to collapse
I have the Metro PCS version
Moto e5 Play XT1921-3
Mattswad said:
I have the Metro PCS version
Moto e5 Play XT1921-3
Click to expand...
Click to collapse
Ahh That is excellent news. I am about to take a focus supplement, and dive into trying again I'll let you know. I found a few more of MrBox23's posts and I think I MAYBE onto something.... wish me loads of luck. If it works for me I THINK it should work for you, but you might need to start with a diff image than me, or use a different boot and vendor img than I will.. not sure if I can help you find those files or not..
I'll be back later to update what I find.
Sorry I haven't been on for awhile. I'll go ahead and post my working vendor and boot images. On Google drive for download. Doing this will trash your speaker if you play music very loud at all, expect that. I do not understand how to fix it. Other than that it's a daily driver. I have been asked about encryption this and that.. You have to modify fstab.qcom within vendor partition. Also the TWRP for this device will format your data partition as ext4 while the ramdisk and init stack are configured for f2fs(if you try and boot with ext4 data, you get corrupted/encrypted data message). You have to change data partition back to f2fs in TWRP every time you format that partition. Or you could modify the TWRP image like I did to fix it permanent.
Files will be uploaded soon, make sure you understand what's involved before getting into this. I'll answer questions best I can, but this is for those who are dediced and willing to get down on some bootloops to figure it out, especially if you're not used to this sort of thing. Some magisk modules will cause bootloops, do those one at a time and gapps separately. I seriously recommend taking apart the firmware from OP and focus on getting to the aosp boot animation, THEN take care of verity/root and fstab. You're formatting data partition anyway you might as well successfuly backport the graphics first.
Vendor image TWRP backup, put this on its own with boot image. I keep it as vendor_fixed for easy reference. The fstab is already patched if you use mine.
Boot image TWRP backup, it is patched with magisk (19.4 likely) install magisk on your own anyhow. KEEP YOUR ORIGINAL VENDOR/BOOT PARTITIONS! There's stuff in there that you might want later on. Like the /vendor/etc/wifi folder for example or the pieces from the original ramdisk.
Vendor and boot with md5 sums to verify integrity.
https://drive.google.com/folderview?id=1-2KO_iRFTjLv6pyx-7Qmhi8kWZBpVIWD
Wipe everything, including internal storage(after backing up a working system).
Format data partition back to f2fs in advanced wipe options.
Get LineageOS 15.1 beta or RR you can find these here on XDA.
Flash Lineage zip its the old style zip install that copies idividual files, not an image, the boot image it installs needs to be replaced per instructions that follow.
Or flash RR system image from official repository link is found here on XDA.
If you flash a system image with TWRP you'll need to reboot back into recovery right after and resize the system partition in advanced wipe options or your system partion will be incorrect size afterwards, if flashing system with fastboot(recommended) then skip the resize instruction.
After you have a system installed, restore the vendor and boot images from the link. A good approach would be to backup your existing boot/vendor as a pair, then replace originals with downloaded images.
The first time I got this to work, I used fastboot to flash partitions, like this.... I followed instructions within Metro PCS firmware(one of those xml files has the fastboot commands, including some oem options that specify a particular mode) Then i flashed ...RR system, followed by boot/vendor images from firmware referenced in OP. I finished that with fastboot -w option, that was when it worked for me. I dealt with the fstab and boot verity patching AFTER I first saw the default Android boot animation. Once you see that plain white "android" with the slow moving left to right animation, your in. From what I can tell our device needs the older kernel within the boot image and the libs/binaries from the vendor image to get the screen working correctly. Your trading your working speaker, for a working screen. I have attempted to find exactly what it is that's different between the two, but it's over my head. Overall it's relatively stable, go easy with magisk modules, some of them will cause kernel panic(bootloop) use a recovery based magisk tool to disable offending module if this happens. Sometimes the device will not boot normally, usually this means the cache was erased(its okay) for whatever reason and I wait it out, otherwise I restore the vendor_fixd backup I made. I have not had gone back to stock ROM, however I have had to flash the vendor partition to get it booting, usualy happens if i flash a module or when updates break substratum theme.
Good luck!
Oh email me for quick response, within reason.
mrbox24 at gmail
Bonus screenshot and the TWRP 3.1.1 I modified with correct data format. If you have an sdcard with second partition it will show up as "linux" named after the chroot partition from mine.
Screenshot shows LSM kernel found here, yes it works.
mrbox23 said:
The first time I got this to work, I used fastboot to flash partitions, like this.... I followed instructions within Metro PCS firmware(one of those xml files has the fastboot commands, including some oem options that specify a particular mode) Then i flashed ...RR system, followed by boot/vendor images from firmware referenced in OP. I finished that with fastboot -w option, that was when it worked for me.
.
Click to expand...
Click to collapse
thank you for this! (and the files)
questions...
1.) Your files in your zip extract as boot.emmc.win and vendor_image.emmc.win ...
Should we rename them to boot.img and vendor_image.img before flashing?
2.) Is your file TWRP-3.1.1_JAMES_T_f2fs-data.img already fixed to format data as f2fs?
3.) where is the option in Twrp to backup vendor and boot images?
I'm almost ready to dive in...
aka.bugle said:
thank you for this! (and the files)
questions...
1.) Your files in your zip extract as boot.emmc.win and vendor_image.emmc.win ...
Should we rename them to boot.img and vendor_image.img before flashing?
2.) Is your file TWRP-3.1.1_JAMES_T_f2fs-data.img already fixed to format data as f2fs?
3.) where is the option in Twrp to backup vendor and boot images?
I'm almost ready to dive in...
Click to expand...
Click to collapse
Yes TWRP is fixed for f2fs data, also the correct version is 3.3.1 latest for device.
Those files are ready to be RESTORED, not flashed in TWRP. You would replace files in an existing backup with those. I have a fresh backup made from from the earliest metro pcs firmware. I am about to upload. What device do you have?
mrbox23 said:
Yes TWRP is fixed for f2fs data, also the correct version is 3.3.1 latest for device.
Those files are ready to be RESTORED, not flashed in TWRP. You would replace files in an existing backup with those. I have a fresh backup made from from the earliest metro pcs firmware. I am about to upload. What device do you have?
Click to expand...
Click to collapse
Cool. thanks.. So far I have three, 1921-2 At&t (new, prepaid, bootloader unlockable so far, daily phone), an xt1921-5 unlocked bootloader, sim locked to sprint, so far been unable to get another rom to boot, and an xt1921-3 metropcs Gsm unlocked, boot loader unlocked, and now booted to lineage 15.1 thanks to you and phh. Wifi works, and gapps go seem to not crash, I did the register a non-stock rom hoop jump with google. Camera nothing but gray or crashes. Everytime it boots, clock time is wrong. haven't really tested much yet.
Really want to be able to get camera functioning, and test an At&t sim in it before switching it to my daily device. I read that the camera fix was committed to 15.1 but I'm lost as how to apply those patches even if I could find them.
aka.bugle said:
Cool. thanks.. So far I have three, 1921-2 At&t (new, prepaid, bootloader unlockable so far, daily phone), an xt1921-5 unlocked bootloader, sim locked to sprint, so far been unable to get another rom to boot, and an xt1921-3 metropcs Gsm unlocked, boot loader unlocked, and now booted to lineage 15.1 thanks to you and phh. Wifi works, and gapps go seem to not crash, I did the register a non-stock rom hoop jump with google. Camera nothing but gray or crashes. Everytime it boots, clock time is wrong. haven't really tested much yet.
Really want to be able to get camera functioning, and test an At&t sim in it before switching it to my daily device. I read that the camera fix was committed to 15.1 but I'm lost as how to apply those patches even if I could find them.
Click to expand...
Click to collapse
I think those patches are applied at source code level. meaning it would be in a future release. My camera works running Resurrection Remix, on xt-1921-3 try copying [email protected] from stock /system/lib/hw to /vendor/lib/hw, making sure to keep permissions same as others in vendor/lib. im willing to read logs, does your att run lineage? if so, does bluetooth work?
I make custom scripts and have a custom build.prop, for example this.....
resetprop 'media.camera.ts.monotonic' 0
resetprop 'persist.camera.HAL3.enabled' 1
resetprop 'audio.deep_buffer.media' true
Those three lines are saved to a file called mediafix.sh in /data/adb/service.d to be ran at boot. it helps with media and camera issues. As well as a one line file called led-chg.sh
echo battery-charging > /sys/class/leds/charging/trigger
Which turns on the light, otherwise never used, in front of phone when charging.
I think it's important to use a/the real fingerprint from an e5 device along with other properties. To get the best out of the hardware and least error messages during boot. I go through logcat/dmesg and attempt to fix what's broken, like the camera on lineage(works without trouble on rr remix btw). I used hidepropsconf module at first and a sprint fingerprint, but later began using the one found in info.txt of firmware zip.
ill post my work in progress build.prop(hosting it with new vendor and boot images on gdrive) which noticeably improves overall performance and lends to less log errors, or lags and crashes.
I find the vendor/boot firmware here(oldest 2018) https://mirrors.lolinet.com/firmware/moto/james/official/Metropcs/ to work best. Audio is completely a loss though. My speaker is blown now and no Bluetooth unless running stock, not even the headphone jack works. All sound comes from the one speaker, even with headphones plugged in I'm at a loss with that issue.
I also modify the boot image. turns out the 1921-3(possibly others?) uses the sdk26 8.0 android ld(library config) instead of the ld.config.27.txt that matches its sdk level. in fact if i try to force the 27 lib config, the gray/black screen comes back. it boots up, i know because my charger light comes on, but no screen. Anyhow i change the os level in boot config to 8.1.0, this gets me to where i am now with only bluetooth(mixerpath/lib issues i suspect) and a couple missing ui features due to what i imagine originate from missing whitelists in /system/etc/permissions xml files.
Another thing of note is how i spoof the mac adress for wifi, this(and other things) is done by modifying the kernel command line config in boot.img. my second e5 play xt-1921-3 has a broken screen, and serves exclusively as a wifi-repeater, captive-portal, and ssh server/tunnel. i spoof the busted screen wifi mac, with an old device mac address that is still registered on xfininity wifi network. it repeats that connection to my other devices. very efficiciently at that. with 3+MiB/s average. it took some hacking but after i found out the oem partition on this device can be formatted, and removed from the ramdisk/system all together, without consequence(not to lineage, bootleggers, or rr remix that is) and be re-purposed to whatever else. its roughly 700MB in size perfect for a debian chroot with my custom wifi repeater and misc servers. running in its own dedicated internal(FAST)partition. This device, and its kernel level mac spoofing with the now almost phased out WCNSS qualcom configurable wifi firmware, is incredible. the busted screen one has been on every day non stop functioning as a repeater, router with captive portal, and dhcp service, for almost two months. it automatically connects to wifi, kills the android zygote/system server, kills its backlight and starts up a hotspot and sshserver/captive portal, all without cell service, and without any interaction.
Anyway, new mpcs files up soon.....
mrbox23 said:
I think those patches are applied at source code level. meaning it would be in a future release. My camera works running Resurrection Remix, on xt-1921-3 try copying [email protected] from stock /system/lib/hw to /vendor/lib/hw, making sure to keep permissions same as others in vendor/lib. im willing to read logs, does your att run lineage? if so, does bluetooth work?
###bugle added### my Att is an xt1921-2, can't even unlock the bootloader... But 30 bucks isn't bad for a new screen and a new speaker. ###
Another thing of note is how i spoof the mac adress for wifi, this(and other things) .
Anyway, new mpcs files up soon.....
Click to expand...
Click to collapse
Years ago, I used to compile Gentoo to run on some archaic hp tablets... Now I just run Linux mint on somewhat newer hardware. This gave me a limited skillset to get an old Moto mb300 running with gingerbread and CyanogenMod. Everything worked, had them for over 4-5 years, just started really messing up over the summer. Miss the real keyboard.
Thanks so much for the tips and insights. It'll take some time to absorb everything in your post.
aka.bugle said:
Years ago, I used to compile Gentoo to run on some archaic hp tablets... Now I just run Linux mint on somewhat newer hardware. This gave me a limited skillset to get an old Moto mb300 running with gingerbread and CyanogenMod. Everything worked, had them for over 4-5 years, just started really messing up over the summer. Miss the real keyboard.
Thanks so much for the tips and insights. It'll take some time to absorb everything in your post.
Click to expand...
Click to collapse
My first "Android" phone was the HTC HD2 wich was actually a Windows phone that can boot linux from the sdcard. I came across it while learning how to get linux booting on laptops. I was fascinated with booting a mini linux on a portable device. I learned about Android and linux in that way, at the same time. Kernel, ramdisk, java machine, broadband cellular modem, and wifi radio in my pocket. I abandoned windows entirely, to this day lol
Right you are! @mrbox23 ... I've got camera on RRemix on the metro 1921-3!
I'm gonna put the lineage/no camera issue on the back burner for when I try to use your older boot/vendor img trick (boot Lineage 15.1) on the unlocked 1921-5.
(I only have a 1Mb/s dsl connection here, takes about 4-5 hours for a 1 gig file to dl)
So, for the Metro 1921-3, I can't find libeffects.so or even the soundfx folder to copy into. (studder fix)
Your script 2 files for media/camera and charge led, other than making them executable (0755? 0700?) will they be called (without any other mod) being in /data/adb/service.d ?
I think it's important to use a/the real fingerprint from an e5 device along with other properties. To get the best out of the hardware and least error messages during boot. I go through logcat/dmesg and attempt to fix what's broken, like the camera on lineage(works without trouble on rr remix btw). I used hidepropsconf module at first and a sprint fingerprint, but later began using the one found in info.txt of firmware zip.
Click to expand...
Click to collapse
I pulled one out of my Att phone that is a james xt1921-2 but has a locked bootloader, all stock ... I used #getprop ro.build.fingerprint.. not sure if i should use this, or wait to see your build.prop...
ill post my work in progress build.prop(hosting it with new vendor and boot images on gdrive) which noticeably improves overall performance and lends to less log errors, or lags and crashes.
Click to expand...
Click to collapse
All the best to you and yours in 2020. Meeeerrrry eXksMix, hic up'
Yes to service.d with those three. I ditched the camera ones though, footej or another camera is nice. Im close to figuring out what the vndk library thing.
hosting current prop setups, between resetprop in service.d and modifying build prop. other goodies too. I turned oem partition into swap space, and added permissions to priv-app xml's enabling more RR features, like hold back to kill app.
mrbox23 said:
Yes to service.d with those three. I ditched the camera ones though, footej or another camera is nice. Im close to figuring out what the vndk library thing.
hosting current prop setups, between resetprop in service.d and modifying build prop. other goodies too. I turned oem partition into swap space, and added permissions to priv-app xml's enabling more RR features, like hold back to kill app.
Click to expand...
Click to collapse
mediafix line 2... set or resetprop?
1 resetprop 'media.camera.ts.monotonic' 0
2 setprop 'persist.camera.HAL3.enabled' 1
what are these last lines in mediafix for?
16 resetprop net.dns1 1.1.1.1
17 resetprop net.dns2 1.0.0.1
and i'm guessing the deb.sh is for your wifi repeater? swap space in oem?
how is mpcs.prop called? where is its proper folder?
can you host a copy of libeffects.so ?
@mrbox23 Bluetooth working! check.
aka.bugle said:
@mrbox23 Bluetooth working! check.
Click to expand...
Click to collapse
something I just noticed here recently is that's all the audio output now. I can't test cellular calls, Hangouts only works when i restore that vendor path Back to where it was. My camera broke again to. I want to reach out to phh here or github.
Well that's a big bug, sorry. I've reverted the metro 1921-3 to stock for now, but on the positive side, I tried using your older boot/vendor imgs trick on the 1921-5 (Sprint)... and success! it boots Lineage 15.1 and bluetooth works, I haven't tried using the GSM Att Sim yet and still no camera, (I haven't tried your other camera recommendations yet.) One step closer for the 1921-5.