hi
i´ve got a problem
have a touch pro with winmo 6.5
downloaded xdandroid 2.2.1 frx03 (but tried to resolve the problem with changing to frx04, too).
first - xdandroid works great. very nice and smooth
but - i only loaded it because it´s not possible to connect a android tablet with a winmo hotspot (because winmo only can provide ad-hoc as spot and android is unable to connect to ad-hoc)
so i read that it should work with the android hotspot...
so far so good.
but wifi doesn´t work on my touch pro.
i tried different things -
startet the haret.exe with enabled wifi (it works great on winmo),
startet haret.exe with disabled wifi
tried the frx03, the frx04
everytime i try to enable wifi in xdandroid it says fail
unable to connect to my home-wlan
and unable to scan for wlan because alsways a fail during the try to enable
I hope there is a resolution for this problem or am i just one of those f***** people where wifi under android didn´t work'?
HTC Touch Pro here as well.
Installed 2.2.1 FRX03.21 and no wifi for me either. I just got installed yesterday. First I have tried Xandroid in about 9 months. Was hoping it would work slick,out of the box. I 'm sure someone will come up with a patch to get wifi working. Oh, by the way, camera would not work either I am guessing gps may not either?
I wanted to add, I do see a couple 'light bars' on the wifi icon that comes and goes a little, like android does see the access point.
Barry
Using FRX04 with the latest kernel package from the Autobuild site and rootfs on my Fuze/RAPH110 and am staring at 5 wifi spots...
Not sure why you are experiencing those issues, have you tried to start over from scratch with FRX04 yet?
Please leave some feedback HERE
Autobuild site link: CLICK HERE
n-Joie! (Enjoy)
Hey all,
I am trying to revive my old unused Acer Aspire A150 to use as a car pc.
Android-x86 ICS 4.0 EEEPC build installed perfectly fine. I've got everything working so far apart from 3G.
I have a Vodafone Huawei E220 dongle which I have unlocked and de-activated the CDROM mode.
Problem is when I plug it into the netbook, it starts up fine but Android cannot see it for some reason. If I go into Settings>Mobile Networks and try to search for Network providers it just searches and never finds anything. If I unplug the dongle, Android pops up a message saying "Error finding networks".
Any advice guys?
Hi,
I recently bought a Nikon Coolpix P610 with built-in WiFi. When I tried to connect my OPO (factory ROM, up-to-date with OTA to 5.1.1 Cyanogen 12.1-YOG4PAS3JL) with the camera WiFi, my cellphone never reach to an IP address.
I have installed the app "Wireless Mobile Utility" from Nikon. I read that the app is compatible with several phone but the OPO isn't on the list so it might not work, but i need it to work.
The camera work just fine because I tried with a Samsung Galaxy S3 mini and it was okey.
I wonder if anyone had the same problem and could fix it or if you can help me to figure it out.
I tried to connect it through an static IP instead DHCP but I failed, I don't know if i'm doing it right.
Thankys in advance
Black Rnag said:
Hi,
I recently bought a Nikon Coolpix P610 with built-in WiFi. When I tried to connect my OPO (factory ROM, up-to-date with OTA to 5.1.1 Cyanogen 12.1-YOG4PAS3JL) with the camera WiFi, my cellphone never reach to an IP address.
I have installed the app "Wireless Mobile Utility" from Nikon. I read that the app is compatible with several phone but the OPO isn't on the list so it might not work, but i need it to work.
The camera work just fine because I tried with a Samsung Galaxy S3 mini and it was okey.
I wonder if anyone had the same problem and could fix it or if you can help me to figure it out.
I tried to connect it through an static IP instead DHCP but I failed, I don't know if i'm doing it right.
Thankys in advance
Click to expand...
Click to collapse
i had no problems connecting it to my D5300 , which method did you use while connecting , i used WPS and it works flawlessly everytime i flash a new rom , try restating both devices and give it a try
thelostlegend said:
i had no problems connecting it to my D5300 , which method did you use while connecting , i used WPS and it works flawlessly everytime i flash a new rom , try restating both devices and give it a try
Click to expand...
Click to collapse
As far as I know, Nikon Cooplix P610 doesn't have the WPS button, and the menu doesn't have the option like in D5300. So, you are forced to connect the smart device trough a tipical WiFi connection, like if the camera was a modem. And it didn't work :s
Black Rnag said:
As far as I know, Nikon Cooplix P610 doesn't have the WPS button, and the menu doesn't have the option like in D5300. So, you are forced to connect the smart device trough a tipical WiFi connection, like if the camera was a modem. And it didn't work :s
Click to expand...
Click to collapse
You don't need wps button , in 5300 connect using wps is inside WiFi settings ,so maybe your cam has that too
Sent from my OnePlus One
thelostlegend said:
You don't need wps button , in 5300 connect using wps is inside WiFi settings ,so maybe your cam has that too
Sent from my OnePlus One
Click to expand...
Click to collapse
No, like I said, I did search the menu of D5300 and it's different to P610's menu. That's why I'm so concern about this because my only option is connect the smart device through a typical WiFi network generated by the camera.
I think that the problem is in my phone settings or how to fix it through a static IP addres, not at the camera, but I don't know how to solve it
Hi.. I am facing the same problem, not able to connect my one plus 2 with nikon d5300. Have got WMU installed, the phone says connected however camera shows not connected and when i open the app, it also says not connected... Please advise.
Manit Arora said:
Hi.. I am facing the same problem, not able to connect my one plus 2 with nikon d5300. Have got WMU installed, the phone says connected however camera shows not connected and when i open the app, it also says not connected... Please advise.
Click to expand...
Click to collapse
Hi. I have to say that with the following OTA of my phone that I received the problem was solved. So, I can't help you.
What can I say to you is that I talked to the Oneplus Support and they were very gentle and after like two months talking trying to explain my problem I managed to make an online appointment where they study my phone. Finally, because of my PC's operating system they couldn't upload some files in my phone to solve the problem. But the analyst I was talking said he would raise my problem to developers, and in fact, they solved the problem in the next update. If you really need this solved, you should try to talk to support, even most in your case, because your device has Oxygen.
I hope my answer helps you. Regards.
Hi folks,
Yesterday I updated my 930F from SupermanRom 2.9.1 (Nougat) to SupermanRom 3.0.1 (Oreo).
After that, I couldnt connect to any of my bluetooth devices.
In the search window they dont even appear with their names, only their MAC adresses are visible (but not connectable).
Going back to Nougat didnt bring the bluetooth functionality back. Still not working.
Same for installing an old modem.
Now I flashed Lineage15.1....And the problem is still there...
So wtf?!?!
What can I try next...??
Little update..I can find my Laptop and connect when I activate its bluetooth connection. But the other devices like JBL music box still dont work.
Schmiddi
Good morning connecting my Pocox3 NFC to the car via Usb, a Seat Arona of 2020 does not start Android auto. I think it is a phone problem as I have tried with a Real me X2 pro and everything works.
I read on other forums I have heard about the problem of cloned apps but I don't have any. Equal is more a problem of MIUI 12 .. I don't know ... can you help me !? thanks
for me in an audi a3 (which should be similar to arona regarding software) 2018 it works perfectly :S (using cable, not wifi)
Try removing second space and enabling usb debug
no I have already tried to delete the second space and enable usb debugging but on my Poco x3 there is nothing to do it does not start