Related
News :
Starting today, i'll just upload the firmware if it has a change in it.
So you know there's no need to update the firmware if there's no change in it, save the hassle.
Tips :
* I've added checksum file for each firmware-only files in google drive, so you guys can see what's changed on every firmware-only release.
* If you experience sim card not detected after flashing firmware, don't worry, it's normal. do this, plug out and plug in your sim card tray, and restart your device.
[FIRMWARE-ONLY]
Recommended : 9.2.21
Latest : 9.2.21
https://drive.google.com/drive/folders/1PGmzEcmgG0XhRB7110CDDTgMwmw4N3MM
[ROMS - CHINA]
http://www.miui.com/download-323.html
[ROMS - GLOBAL]
http://en.miui.com/download-317.html
yep i believe the Miui10 is in Alpha and currently being tested by a closed group of users. we should see public Beta releases towards the end of June.
Im just curious if there is any difference in battery consumption to previous version of MIUI.
I've tried it a couple of days ago. There are some visual changes like new notifications panel UI, recents UI, In-call UI etc. A bit more IOS-ish as some say.
First of all, if you consider flashing it;
- You need the Raupe/Blunden twrp to flash it, other recoveries end up with error 7.
- After flashing this build; twrp will ask for a decrypt password and no password will be correct. So your internal storage won't be mounted on twrp no way to fix it at the moment.
- Magisk 16.4 is able to root it, don't know about previous ones.
- If you consider flashing other roms, you have to do factory reset(format data) to get your internal be able to mount on twrp again.
- It doesn't have google apps as it's China specific, so you need to install google apps manually by Google installer apk or there are zip files for miui 10 ported gapps which give force closes randomly.
- Can be a daily driver since all is working.
- Xposed won't work.
Other than these hick ups, it's good initial build. Fast and smooth, can't tell about battery life since I haven't used it for a long time. There are secondary releases(8.6.5) for some devices so can be around for Mix too. Cheers.
Sent from my Xiaomi Mi Mix using XDA Labs
Konstantine34 said:
I've tried it a couple of days ago. There are some visual changes like new notifications panel UI, recents UI, In-call UI etc. A bit more IOS-ish as some say.
First of all, if you consider flashing it;
- You need the Raupe/Blunden twrp to flash it, other recoveries end up with error 7.
- After flashing this build; twrp will ask for a decrypt password and no password will be correct. So your internal storage won't be mounted on twrp no way to fix it at the moment.
- Magisk 16.4 is able to root it, don't know about previous ones.
- If you consider flashing other roms, you have to do factory reset(format data) to get your internal be able to mount on twrp again.
- It doesn't have google apps as it's China specific, so you need to install google apps manually by Google installer apk or there are zip files for miui 10 ported gapps which give force closes randomly.
- Can be a daily driver since all is working.
- Xposed won't work.
Other than these hick ups, it's good initial build. Fast and smooth, can't tell about battery life since I haven't used it for a long time. There are secondary releases(8.6.5) for some devices so can be around for Mix too. Cheers.
Click to expand...
Click to collapse
I'm willing to give this a shot, thanks for the input ??
Ok trying it now and everything seems to be working good. A little laggy at the moment so I'm just letting it set in. I was hoping the camera would've gotten updated but same old crappy camera software from previous MIUI firmware. Hopefully when they do release the final version we'll get a updated camera but all in all this is a keeper till we get updated version on here, hopefully...
juggaknot77 said:
Ok trying it now and everything seems to be working good. A little laggy at the moment so I'm just letting it set in. I was hoping the camera would've gotten updated but same old crappy camera software from previous MIUI firmware. Hopefully when they do release the final version we'll get a updated camera but all in all this is a keeper till we get updated version on here, hopefully...
Click to expand...
Click to collapse
Have face unlock maybe?
zrzatore said:
Have face unlock maybe?
Click to expand...
Click to collapse
Haven't tried that but I'll look into it today and report back.
---------- Post added at 04:27 PM ---------- Previous post was at 03:36 PM ----------
Ok going through settings and as far as I can tell I don't see face unlock feature. I highly doubt the mix will get seeing as how old it is now, I never use it anyway on other devices so it's not a big deal to me. Everything is running very smooth and fast, I'm liking the Android P style look a lot, more than how it looks on the pixel but that's just me.
How did you go past decrypt after flashing via TWRP?
Wmateria said:
How did you go past decrypt after flashing via TWRP?
Click to expand...
Click to collapse
You just cancel it and internal storage will be unable to use on twrp. If you flash other things, you need to do it by an OTG.
Sent from my Xiaomi Mi Mix using XDA Labs
Konstantine34 said:
You just cancel it and internal storage will be unable to use on twrp. If you flash other things, you need to do it by an OTG.
Click to expand...
Click to collapse
Oh yes yes, I always use OTG just in case. Thanks for the info.
I installed it, but I keep loosing the recovery, when I reboot it goes to the Miui recovery.
Is there a way to disable the factory recovery overwriting the twrp.
Appreciate any help.
Thanks.
Konstantine34 said:
You just cancel it and internal storage will be unable to use on twrp. If you flash other things, you need to do it by an OTG.
Sent from my Xiaomi Mi Mix using XDA Labs
Click to expand...
Click to collapse
doesn't it will be solved just by formatting data?
fatouraee said:
I installed it, but I keep loosing the recovery, when I reboot it goes to the Miui recovery.
Is there a way to disable the factory recovery overwriting the twrp.
Appreciate any help.
Thanks.
Click to expand...
Click to collapse
i think you should flash this file in twrp :
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
after that the recovery shouldn't get replaced anymore.
That's weird I don't have any issues seeing my storage in TWRP, everything works.
juggaknot77 said:
That's weird I don't have any issues seeing my storage in TWRP, everything works.
Click to expand...
Click to collapse
really? can you show us the screenshot of the storage in twrp? what twrp version did you use? what other procedure did you perform in order not to encrypt storage? thanks
Thanks. That seems to have worked.
fatouraee said:
I installed it, but I keep loosing the recovery, when I reboot it goes to the Miui recovery.
Is there a way to disable the factory recovery overwriting the twrp.
Appreciate any help.
Thanks.
Click to expand...
Click to collapse
You need to delete
- system/etc/recovery-resource.dat
- system/bin/install-recovery.sh
- system/recovery-from-boot.p
rhong said:
really? can you show us the screenshot of the storage in twrp? what twrp version did you use? what other procedure did you perform in order not to encrypt storage? thanks
Click to expand...
Click to collapse
Honestly I didn't do anything different, followed the instructions on the 1st post, everything works on my end.
juggaknot77 said:
Honestly I didn't do anything different, followed the instructions on the 1st post, everything works on my end.
Click to expand...
Click to collapse
i think he should need to format his Data and Internal Storage.
i can't remember the detail, but i once encountered this too, and i read that something about F2FS not supported or whatsoever.
heindrix said:
i think he should need to format his Data and Internal Storage.
i can't remember the detail, but i once encountered this too, and i read that something about F2FS not supported or whatsoever.
Click to expand...
Click to collapse
It's weird I didn't format anything, just updated twrp, backed up my rom, wiped everything, installed new miui 10, installed magisk, wiped cache and dalvik and everything works perfectly...
... brings some new stuff and newer security patch.
And, not mentioning it in the release notes, it comes with a dark mode!
koalalump said:
... brings some new stuff and newer security patch.
And, not mentioning it in the release notes, it comes with a dark mode!
Click to expand...
Click to collapse
Changelog
koalalump said:
... brings some new stuff and newer security patch.
And, not mentioning it in the release notes, it comes with a dark mode!
Click to expand...
Click to collapse
what new stuff you noticed? i only noticed darkmode so far and security patch for may too.
koalalump said:
... brings some new stuff and newer security patch.
And, not mentioning it in the release notes, it comes with a dark mode!
Click to expand...
Click to collapse
Where is the dark mode switch?
XDRdaniel said:
Where is the dark mode switch?
Click to expand...
Click to collapse
in display options
genesismarkus420 said:
what new stuff you noticed? I only noticed darkmode so far and security patch for may too.
Click to expand...
Click to collapse
You are right. There is not really much stuff concerning the interface. Only other goodie i have seen is the customizable lock screen clock. I wonder why they mentioned this one in the change notes but did not mention the dark mode (which, i am sure, more people are interested in).
PS: Can it be they fixed the buggy auto brightness? It seems to me, as if it works better now, but i am not really sure, cause i did not use it much before.
freezes?
Hi !
Anyone else having problems with freezing phone on V10.3 versions?
Starting with V10.3.2 I had random freezes (mostly seen when updating apps), so I reverted back to V10.2.2
Now I upgraded to V10.3.3 and problems with freezes are back again.
Does anyone else have these problems or anybody knows a solution?
(freezing meens only reboot possible to get it working again)
thx
regards
I cannot root this version. Tried "fastboot flash recovery" many times but all I got is failure. Anyone?
flushbeer said:
Hi !
Anyone else having problems with freezing phone on V10.3 versions?
Starting with V10.3.2 I had random freezes (mostly seen when updating apps), so I reverted back to V10.2.2
Now I upgraded to V10.3.3 and problems with freezes are back again.
Does anyone else have these problems or anybody knows a solution?
(freezing meens only reboot possible to get it working again)
thx
regards
Click to expand...
Click to collapse
Mmm no, I've not experienced this at all, maybe there's a corrupt app on your device? Did you try a clean install?
Remuzzz said:
Mmm no, I've not experienced this at all, maybe there's a corrupt app on your device? Did you try a clean install?
Click to expand...
Click to collapse
Thx for reply.
I did a full wipe, and when I initially updated the apps included in this ROM, I had a freeze (no other apps installed)
I do not think the problem is hardware related, because I've never seen this behaviour on V10.2...
Weird.
Hey, anyone else having problems with Mi Mix 2S with front Camera on V 10.3.3.0?
i have a trouble. i did update my Mi Mix 2S to the MIUI 10.3.3.0, but now the front Camera stopped to work, when i try to start it, only make zoom. Anyone know what can i do?
will twrp-3.3.0-0-polaris work with encryption on this release?
xumixu said:
will twrp-3.3.0-0-polaris work with encryption on this release?
Click to expand...
Click to collapse
works fine for me.
flushbeer said:
works fine for me.
Click to expand...
Click to collapse
Which steps did you follow?
if i only use twrp (fastboot flash recovery), it gets deleted on reboot
if i inmediately reboot into twrp and isntall magisk, i get boot looped (rescue party gets me back into twrp, in this case twrp does not get deleted)
I tried unofficial 3.3.1.0 and does not work either
xumixu said:
Which steps did you follow?
if i only use twrp (fastboot flash recovery), it gets deleted on reboot
if i inmediately reboot into twrp and isntall magisk, i get boot looped (rescue party gets me back into twrp, in this case twrp does not get deleted)
I tried unofficial 3.3.1.0 and does not work either
Click to expand...
Click to collapse
I downloaded with MIUI updater, rebooted to TWRP and installed ROM. Can't remember if I installed from internal storage or from OTG.
(tried a lot of things due to problems with this ROM).
If file gets deleted, you can try to copy it from /sdcard/downloaded_rom to any other folder (e.g. /sdcard) after download (and before reboot), reboot and install from there.
Afterwards I hat to install TWRP and Magisk again
Hello folks,
I successfully installed TWRP and Magisk on G7 Power, without needing to use a stock image, using flug32's guide https://forum.xda-developers.com/showpost.php?p=81305325&postcount=358
(I didn't install Edxposed)
Restored apps and settings via Google Backup, installed ViperFX & CallRecorderFix from Magisk and increased media volume levels in BuildProp.. Everything was working fine for a couple of days, and then the camera kept giving me the Camera Busy error; the usual restore permissions, and restart phone fixes didn't sort it, so wanted to a factory reset. Tried this from settings, but of course, it just boots in TWRP. So then I saw a post that seemed to suggest that you have to do a wipe via TWRP to do this, and now it just boots back into TWRP, I presume that I have wiped something that is needed during normal startup.
Is it possible for me to get it to boot back into the stock image that is/was on the phone, and if so, how do I do a factory reset?
Or am I going to have flash another stock image (the RETGB doesn't seem to be available) following the instructions in this thread https://forum.xda-developers.com/g7-power/how-to/guide-moto-g7-power-supra-flash-to-t3927138
Dark-Eyes said:
Hello folks,
I successfully installed TWRP and Magisk on G7 Power, without needing to use a stock image, using flug32's guide https://forum.xda-developers.com/showpost.php?p=81305325&postcount=358
(I didn't install Edxposed)
Restored apps and settings via Google Backup, installed ViperFX & CallRecorderFix from Magisk and increased media volume levels in BuildProp.. Everything was working fine for a couple of days, and then the camera kept giving me the Camera Busy error; the usual restore permissions, and restart phone fixes didn't sort it, so wanted to a factory reset. Tried this from settings, but of course, it just boots in TWRP. So then I saw a post that seemed to suggest that you have to do a wipe via TWRP to do this, and now it just boots back into TWRP, I presume that I have wiped something that is needed during normal startup.
Is it possible for me to get it to boot back into the stock image that is/was on the phone, and if so, how do I do a factory reset?
Or am I going to have flash another stock image (the RETGB doesn't seem to be available) following the instructions in this thread https://forum.xda-developers.com/g7-power/how-to/guide-moto-g7-power-supra-flash-to-t3927138
Click to expand...
Click to collapse
I think you are going to need to flash a stock rom.
Are you sure it was on software channel Retgb?
Not Tescogb or Eegb
It's a 1955-4 ?
Sent from my mata using XDA Labs
sd_shadow said:
I think you are going to need to flash a stock rom.
Are you sure it was on software channel Retgb?
Not Tescogb or Eegb
It's a 1955-4 ?
Sent from my mata using XDA Labs
Click to expand...
Click to collapse
I am pretty certain that it was on RETGB, as it came unlocked from another supplier, and I seem to remember checking after I had rooted it.
If I put Tescogb or Eegb on it, will that lock it to those networks ?
It is a 1955-4, so I presume RETEU is the best option for a compatiable unlocked ROM.
Dark-Eyes said:
I am pretty certain that it was on RETGB, as it came unlocked from another supplier, and I seem to remember checking after I had rooted it.
If I put Tescogb or Eegb on it, will that lock it to those networks ?
It is a 1955-4, so I presume RETEU is the best option for a compatiable unlocked ROM.
Click to expand...
Click to collapse
Using Tesco or EE will not lock it to those carriers
But there maybe some radio issues.
Yes you will likely have batter compatibility with a 1955-4 rom
Reteu does look like the best option.
Sent from my mata using XDA Labs
@sd_shadow
Do I need to use the same version that I was on, 134-4, or shall I use the updated 134-7 one?
Is there anything else that I need to be aware of, or am I okay just following this guide https://forum.xda-developers.com/g7-power/how-to/guide-moto-g7-power-supra-flash-to-t3927138
Dark-Eyes said:
@sd_shadow
Do I need to use the same version that I was on, 134-4, or shall I use the updated 134-7 one?
Is there anything else that I need to be aware of, or am I okay just following this guide https://forum.xda-developers.com/g7-power/how-to/guide-moto-g7-power-supra-flash-to-t3927138
Click to expand...
Click to collapse
Either version should be fine.
But update will have newer security patch.
That guide is good.
Sent from my mata using XDA Labs
Hi everyone,
I have a Poco X3 Pro which currently runs Xiaomi.eu 12.5.7 and I was wondering if there was any point in updating to Xiaomi.eu 13.
First I've read that there is no recovery that actually supports Android 12, therefore I was wondering if it would be troublesome for some things, and if so, for what. And which recovery should I install, I'm currently running Orangefox which I really like.
Moreover, it seems that it runs slower than Xiaomi.eu 12.5.
Finally I always have trouble migrating to a new rom because of the factory reset needed, and I don't know any viable solution to backup my data properly. I've always lost my data, and all I was managing to save was my apps (without their data's), my contacts and sms (which sometimes didn't work properly) and my photos (ish) .
I was wondering if anyone knew of a solution to backup everything needed such as apps+datas, sms+contacts+mms, pictures and videos.
I'd like to mention that I run Xiaomi.eu mainly for the mobile data tracking features, which I couldn't find in any other non-MIUI rom, and the ui and the new control center since MIUI 12.
Thanks in advance
Ti64CLi++ said:
Hi everyone,
I have a Poco X3 Pro which currently runs Xiaomi.eu 12.5.7 and I was wondering if there was any point in updating to Xiaomi.eu 13.
First I've read that there is no recovery that actually supports Android 12, therefore I was wondering if it would be troublesome for some things, and if so, for what. And which recovery should I install, I'm currently running Orangefox which I really like.
Moreover, it seems that it runs slower than Xiaomi.eu 12.5.
Finally I always have trouble migrating to a new rom because of the factory reset needed, and I don't know any viable solution to backup my data properly. I've always lost my data, and all I was managing to save was my apps (without their data's), my contacts and sms (which sometimes didn't work properly) and my photos (ish) .
I was wondering if anyone knew of a solution to backup everything needed such as apps+datas, sms+contacts+mms, pictures and videos.
I'd like to mention that I run Xiaomi.eu mainly for the mobile data tracking features, which I couldn't find in any other non-MIUI rom, and the ui and the new control center since MIUI 12.
Thanks in advance
Click to expand...
Click to collapse
If you have a Poco x3 pro(VAYU) and use 12.5.7 Xiaomi Eu rom(custom rom not EEA stock) you can update to 13 without losing the data because now you can flash the rom with fastboot command and you can choose between 2 scripts:
"windows_fastboot_first_install_with_data_format.bat"or
"windows_fastboot_update_rom.bat"
For the first install,it is better to format data but update work.
Backup your data with Miphone assistant,Micloud,Google.
https://xiaomi.eu/community/threads/miui-13-stable-release.64441/
https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv13/
Method/ Pc mandatory:
Download rom
open and extract rom with 7.zip or other
Phone in fastboot mode
Execute command according your Pc.(Windows,linux,Mac).
NOSS8 said:
If you have a Poco x3 pro(VAYU) and use 12.5.7 Xiaomi Eu rom(custom rom not EEA stock) you can update to 13 without losing the data because now you can flash the rom with fastboot command and you can choose between 2 scripts:
"windows_fastboot_first_install_with_data_format.bat"or
"windows_fastboot_update_rom.bat"
For the first install,it is better to format data but update work.
Backup your data with Miphone assistant,Micloud,Google.
https://xiaomi.eu/community/threads/miui-13-stable-release.64441/
https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv13/
Method/ Pc mandatory:
Download rom
open and extract rom with 7.zip or other
Phone in fastboot mode
Execute command according your Pc.(Windows,linux,Mac).
Click to expand...
Click to collapse
Oh thanks a lot for the fast and detailed answer.
I just have one last question then, what about the recovery?
Ti64CLi++ said:
Oh thanks a lot for the fast and detailed answer.
I just have one last question then, what about the recovery?
Click to expand...
Click to collapse
Until there is one that will work the roms will flash in fastboot mode.
NOSS8 said:
Until there is one that will work the roms will flash in fastboot mode.
Click to expand...
Click to collapse
But the one I have installed will stay installed right? And there will be no other issue than the failing decryption?
Ti64CLi++ said:
But the one I have installed will stay installed right? And there will be no other issue than the failing decryption?
Click to expand...
Click to collapse
no,your rom is in android 11 not 12.
Remove security from the lock screen before flashing the rom (additional precaution) and save your data just in case.
NOSS8 said:
no,your rom is in android 11 not 12.
Remove security from the lock screen before flashing the rom (additional precaution) and save your data just in case.
Click to expand...
Click to collapse
Okay, thanks a lot for all your answers, I'll try that later tonight
Well, it worked all right.
The only downside I have found for now is a bug with mobile datas. Sometimes it turns off by itself and it is impossible to turn it back on without rebooting
Ti64CLi++ said:
Okay, thanks a lot for all your answers, I'll try that later tonight
Click to expand...
Click to collapse
Ti64CLi++ said:
Well, it worked all right.
The only downside I have found for now is a bug with mobile datas. Sometimes it turns off by itself and it is impossible to turn it back on without rebooting
Click to expand...
Click to collapse
What script did you use?
NOSS8 said:
What script did you use?
Click to expand...
Click to collapse
I used the update one for Windows, since I have Windows 11
Ti64CLi++ said:
I used the update one for Windows, since I have Windows 11
Click to expand...
Click to collapse
reset the phone.
NOSS8 said:
reset the phone.
Click to expand...
Click to collapse
Is it the only solution?
Ti64CLi++ said:
Is it the only solution?
Click to expand...
Click to collapse
This is the solution to be sure that it does not come from the update.
Post#2
"
For the first install,it is better to format data but update work.
Backup your data with Miphone assistant,Micloud,Google.#
NOSS8 said:
This is the solution to be sure that it does not come from the update.
Post#2
"
For the first install,it is better to format data but update work.
Backup your data with Miphone assistant,Micloud,Google.#
Click to expand...
Click to collapse
OK thanks, I'll wait and see if it does appear again before actually formatting data
Ti64CLi++ said:
OK thanks, I'll wait and see if it does appear again before actually formatting data
Click to expand...
Click to collapse
Before formatting you can try to reset Wifi, mobile networks and bluetooth.
Settings/connect and share
Thanks I may try that, but for now I haven't had the bug again.
Also, do you know of any way to change the boot animation? I tried replacing the bootanimation.zip on my own but I can't it is read only, and even with an app such as boot animation on play store (I am rooted) it doesn't work.
I tried flashing some animation as Magisk module that I found on the Internet but nothing works
Ti64CLi++ said:
Thanks I may try that, but for now I haven't had the bug again.
Also, do you know of any way to change the boot animation? I tried replacing the bootanimation.zip on my own but I can't it is read only, and even with an app such as boot animation on play store (I am rooted) it doesn't work.
I tried flashing some animation as Magisk module that I found on the Internet but nothing works
Click to expand...
Click to collapse
Just download a theme with a boot animation, rename the theme to zip and modify the boot animation or replace it with your own.
NOSS8 said:
Just download a theme with a boot animation, rename the theme to zip and modify the boot animation or replace it with your own.
Click to expand...
Click to collapse
And where do I find a theme with boot animation? Can't I download the zip of my current theme? (which is the default one)
Ti64CLi++ said:
And where do I find a theme with boot animation? Can't I download the zip of my current theme? (which is the default one)
Click to expand...
Click to collapse
Either you look in the Miui store and you retrieve it on the phone or a google search.
Or here to modify if necessary:
https://xiaomi.eu/community/threads/custom-bootanimation.62056/#post-617545
NOSS8 said:
Either you look in the Miui store and you retrieve it on the phone or a google search.
Or here to modify if necessary:
https://xiaomi.eu/community/threads/custom-bootanimation.62056/#post-617545
Click to expand...
Click to collapse
Thanks a lot it worked alright!
My phone is harassing me to make the update to Global (KB2005_11_F.13) but it always fail. I would really like to update because I'm hoping it will solve some problems like my Gboard not showing up anymore. I've been looking around but can't find the tool to update manually. How to do?
Kremata said:
My phone is harassing me to make the update to Global (KB2005_11_F.13) but it always fail. I would really like to update because I'm hoping it will solve some problems like my Gboard not showing up anymore. I've been looking around but can't find the tool to update manually. How to do?
Click to expand...
Click to collapse
Try downloading the update and use the the app mentioned too do the installation
BillGoss said:
OOS 13 NA
https://android.googleapis.com/packages/ota-api/package/e61f1cf7c6a55e531113091deadfb7acb96901da.zip
MD5: 250e0362ed6000b70f363c08fbaf3ab0
Version: KB2005_11.F.13_2130_202211142345
Size: 4.53 GB
Type: full
...
Click to expand...
Click to collapse
BillGoss said:
I used the My Application 2 app to install OOS 13 locally.
Source: https://oxygenos.oneplus.net/English_20220225101104.apk
Reference: https://forums.oneplus.com/threads/oxygenos-12-for-the-oneplus-8t.1555060/
So I'm assuming that the app will work with OOS 13 updates.
Click to expand...
Click to collapse
Thanks, will it erase my data? Do I need to backup everything and clean? (Yeah I know I should back up)
No, the update doesn't wipe anything.
It still doesn't work. I think I need to factory reset and then upgrade