Related
Finally got my app up and running on the Market and being a die hard xda user, I thought it would only be appropriate to post it here for fellow users to enjoy. =)
IntelliCover is a utility which uses your device’s proximity sensor to control its display and allow fast and efficient access to your phone or tablet.
It turns the screen turns off automatically when you put your device in your pockets, close its flip cover, store the device in a bag, or even just leave the device facing down on a table. As soon as the device is back in your hand the proximity sensor is triggered again, the screen turns back on and your phone is instantly ready for use.
IntelliCover is more feature-filled than any other similar application on the market. And the best part? It's FREE!
Click here to visit the market page and download the app for free
P.S. If you find a bug, I'd appreciate if you could report it to me before giving a bad rating because it usually only takes me less than a day to fix.
*** Features ***
Calibration:-
Proximity Sensor Delay – Add a delay to the time takes to trigger the sensor and turn the screen off.
Application Settings:-
Automatic Unlock – Automatically dismiss the Unlock Screen, provided there is no password. *Experimental*
Disable in Landscape Mode – Disable the proximity sensor when an application is in landscape mode.
Go to Home Screen – Show the home screen when the screen turns on.
Screen Off Only – The screen will turn off but not on when the proximity sensor is triggered.
Screen On Only – The screen will turn on but not off when the proximity sensor is triggered.
Start on Boot – Automatically start the IntelliCover service when the device turns on.
Notifications:-
Proximity Warning – Vibrate every time the proximity sensor is triggered.
Status Bar Notification – Show an ongoing notification in the status bar.
Screen On and Off Actions:-
Airplane Mode – Enable or disable airplane mode.
Auto Rotate (will be removed) – Activate or deactivate.
Auto Sync – Activate or deactivate auto-sync.
Bluetooth – Enable or disable Bluetooth.
Haptic Feedback (will be removed) – Activate or deactivate haptic feedback.
Ringer Mode – Switch ringer mode to Normal (Sound with Vibration), Vibrate or Silent.
Wi-fi – Enable or disable wi-fi.
*** Frequently Asked Questions ***
Q) Is it really free? Where are the ads?
Ans) IntelliCover is completely free and has no ads whatsoever!
Q) Do I require a rooted device to use IntelliCover?
Ans) Nope. IntelliCover works on all supported phones and tablets, rooted or unrooted.
Q) Doesn’t using the proximity sensor consume a lot of battery?
Ans) Actually, the proximity sensor consumes minimal power, almost little enough to be insignificant.
Q) What are the ‘Screen On’ and ‘Screen Off’ actions?
Ans) IntelliCover allows you to set events to be triggered when the screen turn on or off. For example, by setting wi-fi to turn on when your screen turns on and setting it to turn off when the screen turns off, you could save a huge amount of battery power.
Q) Can I request a feature?
Ans) Of course! Head over to the Contact section to drop me an e-mail.
Q) Why does IntelliCover keep running in the background?
Ans) It has to run in the background to know when the proximity sensor is triggered.
Q) Can I donate to the developer?
Ans) Not yet but hopefully I’ll have something set up soon.
*** Permissions Required ***
INTERNET - Required for error logging (to send crash reports)
WAKE_LOCK - Required to unlock screen
WRITE_SETTINGS - Required to toggle ringer mode
VIBRATE - Required to vibrate phone
RECEIVE_BOOT_COMPLETED - Required to detect phone boot
WRITE_SYNC_SETTINGS - Required to toggle autosync
READ_SYNC_SETTINGS - Required to toggle autosync
BLUETOOTH - Required to toggle bluetooth
BLUETOOTH_ADMIN - Required to toggle bluetooth
ACCESS_WIFI_STATE - Required to toggle WiFi
UPDATE_DEVICE_STATS - Required to toggle WiFi
CHANGE_WIFI_STATE - Required to toggle WiFi
*** Contact ***
Feel free to contact me at [email protected] with any issues, bug reports, feature requests, suggestions or queries. Please read the FAQ above before sending an e-mail to avoid redundancy.
Click here to visit the market page and download the app for free
Hello! I love the app! I just installed it, and it works great so far keep up your good work!
Sent from my HTC Sensation Z710e using xda premium
Seems good, some questions though.
1. Is it supposed to be able to turn the screen on? Take phone out of pocket, proximity sensor detects values that indicate there's nothing near (Sorry, dunno how / what values are calculated / used) and viola, screen on?
2. Dunno if I've set it up incorrectly. But, currently, if I turn on my screen, via the power button (Sony Xperia S), the stock lockscreen will show, and either one of two things will happen. Either I unlock it successfully, and the split second I'm completing the unlock, the phone will screen off, and engage the lockscreen - after unlocking this, can I get into my phone. OR it'll do what I've previously mentioned, without input.
timmy-kidd said:
Hello! I love the app! I just installed it, and it works great so far keep up your good work!
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
Thanks! Glad you liked it! =)
Profool said:
Seems good, some questions though.
1. Is it supposed to be able to turn the screen on? Take phone out of pocket, proximity sensor detects values that indicate there's nothing near (Sorry, dunno how / what values are calculated / used) and viola, screen on?
2. Dunno if I've set it up incorrectly. But, currently, if I turn on my screen, via the power button (Sony Xperia S), the stock lockscreen will show, and either one of two things will happen. Either I unlock it successfully, and the split second I'm completing the unlock, the phone will screen off, and engage the lockscreen - after unlocking this, can I get into my phone. OR it'll do what I've previously mentioned, without input.
Click to expand...
Click to collapse
Yup, it turns the screen on as well. The values are pretty much just FAR and NEAR for most proximity sensors, so once it detects that there's no object close to it, it should turn the screen on. If it's not turning on at all, that might be the root of the problem i.e. it might be causing the unlock issue as well...Hmmm...I checked out your phone specs and since you said "stock lockscreen", I think it's safe to assume you're on the stock ROM but are you still on Gingerbread? If so, that partially explains the issue. Some Gingerbread ROMs have compatibility issues with the app that are very similar to what you've described, I have no idea why but I'm still looking into it. I had to fix ALOT of Gingerbread issues to get it working this far lol. If you're not on GB though, I guess I need to hunt for an Xperia and begin testing/debuggin. :fingers-crossed:
HUGE update released! V2.0 Hope you all like it. =)
Thanks a lot for sharing your app, it looks grate but unfortunately it is not working with my Galaxy note 10.1
Sent from my GT-N8000 using XDA Premium HD app
I like it! Works fine in my SII stock rom. It will be perfect if i could enable a sound notification when turns off the screen. Not really necessary but cool 4 me (car unlock beep-beep)
Thanks mate!
Frank
thanks for the update
working good.
I'm working on adding a widget and changing the design, but if anyone has any better suggestions, I'd love to hear them because design is not as important as functionality.
Love it. great app, and working fine on both my LG Optimus 3D and Samsung Galaxy Note II.
could we have a choice on the notification icon, would be nice to have a small black dot or something. i just like a empty notification bar but understand the need for it to actually be in the notification bar
thanks
other than that this is my fav ap on my phone
won't this drain battery
mikeschevelle said:
could we have a choice on the notification icon, would be nice to have a small black dot or something. i just like a empty notification bar but understand the need for it to actually be in the notification bar
thanks
other than that this is my fav ap on my phone
Click to expand...
Click to collapse
Yea, it's unfortunate that foregrounding requires the notification icon. You could try using the app without foregrounding, it works for some people. Adding more notification icons should be easy, won't take much time. =) Which ones do you think I should add? A small black dot would disappear on most black status bars (but it'll look like there's an empty space in the status bar so it'll look a little weird)...
skyrocketeer said:
won't this drain battery
Click to expand...
Click to collapse
The proximity sensor uses very little battery and the app itself is pretty light (4-5MB RAM). So far I've only gotten one deep sleep complaint out of 3500+ downloads but no battery issues.
im fine with the black dot, it will keep my bar looking empty
mikeschevelle said:
im fine with the black dot, it will keep my bar looking empty
Click to expand...
Click to collapse
Finally! Found a way to completely remove the icon and the notification from the status bar when the app is foregrounded. It'll be in the next update (today or tomorrow). It can still be enabled manually from the Notifications section but yea, enjoy the emptiness of your status bar. xP
Pretty Huge Update. Hope you like it!
Version 3.0
-Added Screen On Fix for some phones (Enable in settings)
-Status Bar Notification/Icon will no longer automatically show up when app is foregrounded.
-Added Pocket Mode
-Added Table Mode
-Added Widget
-Fixed Screen On/Off Actions bug
One thing I notice (which is NO WHERE CLOSE to a big deal)
The launcher I use (Nova) I hide the status bar and use a gesture to bring it down. When ever Intellicover turns the screen on, the status quickly shows itself and then goes back hidden, not more than a half second of this, but I cannot select anything on the screen until after that status bar thing happens
I like the concept of the app, and it works fine with my sensors. I have one complaint though, I don't like how when the phone screen turns on, it opens to the Intellicover App. Sure I can set it to go to the home screen, but I don't always want that. Once Intellicover is running, I don't want to ever see it again unless I manually launch it from the app drawer. If I have Chrome open and I have to suddenly put my phone down or in my pocket, I'd like to pull my phone back out and have Chrome still be on the screen, just like happens now using the sleep button.
Turns my dumb flip cover on my note 2 into a smart cover. Thanks
Sent from my SPH-L900 using xda premium
garfnodie said:
I like the concept of the app, and it works fine with my sensors. I have one complaint though, I don't like how when the phone screen turns on, it opens to the Intellicover App. Sure I can set it to go to the home screen, but I don't always want that. Once Intellicover is running, I don't want to ever see it again unless I manually launch it from the app drawer. If I have Chrome open and I have to suddenly put my phone down or in my pocket, I'd like to pull my phone back out and have Chrome still be on the screen, just like happens now using the sleep button.
Click to expand...
Click to collapse
Actually, that shouldn't be happening. Once set you never have to see it again. I'm not quite sure what could be triggering this but if you could provide a little information about the OS/phone model/etc. I could try to get a hold on the device and try to replicate the error...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I was tired of pressing the power button whenever I need my phone for a second. Thus I created the Gravity Screen Off app which can turn automatically the screen ON when I grab my phone and turn it OFF when I put it into my pocket or onto a table. Basically, no need to touch any button and you are ready to go.
HOW IT WORKS:
The app turns the screen off by monitoring the orientation of the device through the gravity sensor. When your phone is pointing downward by its top, below a certain angle, it's likely to be out of use. In this situation the proximity sensor is activated to determine if it is covered. If yes, the screen turns off because probably you placed the phone into your pocket or onto a table.
The screen turns on when you lift up your phone. The phone wakes up if the proximity sensor is uncovered or if it was not covered the app is looking for movements to detect the action.
The Keep Screen On feature based on screen orientation and motion detection as well. If the device is pointing upward and small movements are detected it's probably held in hand and the screen timeout is extended.
MAIN FEATURES:
- Pocket Sensor: Recognizes if your phone is in your pocket. By turning your phone below the angle you set, it'll prepare to turn the screen off.
- Table Sensor: Detects your phone is lying on a table and turns the screen off.
- Turn Screen On by Motion: If the screen is off and it's facing up the device can be woken up by any movements (ex. lift up by hand) according to the sensitivity set.
- Keep Screen On by Motion: It's a Screebl like feature but it's relying on the small movements you are doing by your hand while holding the phone. If small motions are detected while the screen is facing up the feature keeps the screen on because it can be suspected that the phone is held and probably you are reading something. If the phone is steady the timeout will work as normal in any position you leave your device unlike in another apps.
- Turn Screen On by Proximity: Turns the screen On when you take your phone out from your pocket and Off when you put it back. By swiping your finger over the proximity sensor the phone can be woken up as well.
- Turn Screen Off by Proximity: If the device is pointing downward it takes the proximity sensor into account. By turning this off the program will rely only on the gravity sensor.
- Tasker, Llama, Locale supported by plug-in.
- 3 widgets/shortcuts: (available in Unlocked version)
(i) pause/resume
(ii) turn screen off: It's like pressing the power button
(iii) turn screen off persistently: turn screen off and keep it off until power button is pressed. It's good when you have to keep the phone in your hand or while driving and do not want the screen turned on by the app. After pressing the power button it will work as before.
- Power Toggles plug-ins
BATTERY USAGE:
You can set the app to minimize the energy consumed by the screen and by this you can extend your battery life. Or you can extend your own life by using another features of the app In the first case the battery usage should be not significant. I experienced about 7 per cent extra consumption on the test device. However it can be higher if you are activating often the Turn Screen On by Motion feature by leaving your device face up on table and you set a relatively long timeout for the feature. Read FAQ [4] for more details.
IMPORTANT
On some devices if it's lying face down the alarm clock is switched off by the app after it had gone off! Please check if it's the case for you. If, yes, use a third party app, for example: https://play.google.com/store/apps/details?id=com.vp.alarmClockPlusDock
DOWNLOAD
Gravity Screen
NOTE
Probably not all feature will work for everyone. It was tested so far mainly on Samsung devices with stock rom. If you think it does not work for you, please read the FAQs below or report your issue in this thread.
REPORT YOUR ISSUE
If you have an issue, do NOT post it until you read the FAQ below and try to solve it alone by trying different settings for some hours. If still no solution, please write all your settings in your question otherwise your question will be ignored. If you feel you have a battery drain, do not post it in this thread. We are not speaking about it anymore
VERSIONS: FREE vs. UNLOCKED by IN-APP PURCHASE
In the Unlocked version, there is no 15 minutes limit for turning the screen on by motion and the Table sensor can be set more precisely, plus it has an Exclude App list, a more advanced Delayed lock option and Widgets.
CREDIT
Thanks to @remidesroques and everyone who helped and keep helping the development by testing the beta versions, sending feed backs or any another way supporting this app.
Translations:
Spanish: Johandri Silva and Eduardo Iñiguez
Russian: Gljadkov Oleg
French: @gregland
Italian: @DesmoDavid
Czech: Jaroslav Vrána
Portuguese (Brazilian): Irwing Junqueira Braga
Change log:
- - v2.4.1 - -
Added: Android M support
Fix: Power button support issue when screen turned off during lock screen
Fix: small issues
- - v1.80.1 - -
Added:
- 3 widgets: (available in Unlocked version)
(i) pause/resume
(ii) turn screen off: It's like pressing the power button
(iii) turn screen off persistently: turn screen off and keep it off until power button is pressed. It's good when you have to keep the phone in your hand or while driving and do not want the screen turned on by the app. After pressing the power button it will work as before.
- Power Toggles plug-ins
- Translation: Traditional Chinese, Turkish
- - - v1.78.2 - -
Fix:
- works on LG P880
Added:
- Languages: Arabic, Chinese, Dutch, Hungarian. Thank you for the translations.
- Car dock detection
APKs:
Gravity Screen - FAQ
Hi,
thanks for your feedback.
[1] Q: The screen not always turns off when I put my phone into my pocket, why?
A: The proximity sensor not always accurate. It can fail recognizing some materials specially if they are very close to it. If it happen occasionally, probably it's still worth to use the sensor. But even you can eliminate the accidental turning on by selecting the False Turn On Protection in Pocket option.
[2] Q: The Table Sensor not really works for me when I place my phone onto a table face down, why?
A: This issue is quite common. The first problem is that the free version is limited to 15 degree. If you are turning your phone fast downward the proximity sensor is activated only when it's very close to the table. Many proximity sensors cannot judge distance accurate if the object is too close to it. This is the reason the screen remains on often. And even more the reliability of the sensor depends partly on the material as well. Thus if you are using the free version it's recommended to place your phone onto a table not too fast and try to keep it parallel to it. The paid version allows you to increase the angle and by this the problem is significantly reduced. Moreover, the problem can be reduced by selecting the False Turn On Protection in Pocket option.
[3] Q: Why does the Lying Face Up feature turn the screen off regardless I'm tapping the screen?
A: Due to Android security restrictions a running service cannot detect if the screen was tapped. If you want to continue using the device you have to swipe over the proximity sensor to keep it on or turn it back on.
[4] Q: I'm experiencing high battery usage, why?
A: The app should use about 6 percent extra energy per day if you are not using too much the Turn Screen On by Motion feature. If you frequently lay your phone face up on a table and the Turn Screen On by Motion Timeout is too long, the battery consumption can be much higher. Because the CPU has to be constantly analyzing the data of to acceleration sensor to catch the movement when you lift up the device. Thus if you want to reduce the battery usage it's recommended to keep your phone often lying face down when it's on a table. Because in this situation the proximity sensor is responsible for turning the screen back on which uses much less energy. Moreover, please, keep in mind that the android en-built battery consumption measurement can show much higher results, because it shows the battery usage relatively to another apps. If the phone was not in use or the measurement period was short, it looks like my app uses too much energy however there was not too much energy used all together.
[5] Q: The Keep Screen On by Motion feature does not work for me, why?
A: It can be the result of battery saving processes on your device. Ask for support from the app in this case.
[6] Q: Turn Screen On by Motion feature does not work for me, why?
A: It can be the timeout of the feature is expired, in this case you have to increase it within the app. Or it can be caused by battery saving methods by killing the service of the app. In this case you have to turn off battery saving methods of your device. Please visit: https://dontkillmyapp.com/
[7] Q: The screen turns off in landscape mode, why?
A: This issue has many different solutions. You can make the Pocket Sensor Angle smaller or if you have the Any Direction feature ticket, you can pause the GS app temporally. There are ways to pause it: 1. tick the Landscape mode feature; 2. using the Locale plug-in by Tasker or Llama; 3. using the Menu - Exclude apps option.
[8] Q: It gives me a huuuge wakelok, why?
A: The wakelock is necessary for the "Turn Screen On by Motion" feature but if you turn the screen off through the proximity sensor (i.e. put it into your pocket or place face down onto a table) there won't be wakelock held. So if you want to reduce the wakelock try to keep your phone face down. Moreover, you can limit it by the Timeout scrollbar as well but this means you will loose the feature after the timeout you set.
[9] Q: I'm prompted to type my pass code immediately after screen turns on.
A: You have to enable the Fingerprint, Smart Lock Support option in the app.
[10] Q: It makes a buzzing sound when listening to music and stuff. Can you turn it off?
A: Due to a hardware problem the proximity sensor is causing the buzzing noise on Nexus 4 when it's active.
At the moment I can recommend some changes in the settings. If you turn on the Headset support and connect your headphone, you are able to turn off the "Turn Screen Off by Proximity" and "Turn Screen On by Proximity" features independently from the state when headphone is not connected. The app will remember this and always turn off the proximity sensor when headphone is connected.
[12] Q: Will you add an option to scheduled the app to stop it for night hours?
A: Not really. Please, use the Locale plug-in in Tasker or Llama;
[13] Q: Why my alarm clock does not work?
A: Unfortunately many alarm clocks cancel the alarm when the screen turns off. It can happen if you leave your phone face down at night and my app turns the screen back off when the alarm goes off. The app is trying to detect the alarm event and pause itself, but it's not possible with all alarm clock apps. Thus it's strongly recommended to test your alarm clock with this app.
You can solve this problem by using a well written alarm clock, for example: https://play.google.com/store/apps/details?id=com.amdroidalarmclock.amdroid, https://play.google.com/store/apps/details?id=com.vp.alarmClockPlusDock,
https://play.google.com/store/apps/details?id=ch.bitspin.timely, https://play.google.com/store/apps/details?id=com.amdroidalarmclock.amdroid, https://play.google.com/store/apps/details?id=com.alarmclock.xtreme.free.
[14] Q: The screen turns on during driving. How to avoid it?
A: The simplest method is to pause the app before driving. There are different widgets in the app for this. Or if you are driving often you can use the Power button support feature A more advanced method can be to pause the app when the phone is connected to the car by bluetooth and resumed when disconnected. You can do this by Llama via the Locale plug-in.
[15] Q: The notification not responding/disappearing when I try to pause/resume the app from the notification area, why?
A: Please try to un-tick the NOTIFICATION -> LOW PRIORITY option in the app. It should solve the problem.
[16] Q: What are the shortcuts/ widgets for:
A:
(i) pause/resume
(ii) off: It's like pressing the power button
(iii) persistent off: turn screen off and keep it off until power button is pressed again. It's good when the phone is moving but you do not want it to turn on.
(iv) lock: turns off the screen and locks it. Useful if delayed lock is in use but you want to lock the device manually.
[17] Q: Where is the Pro version? I cannot find it on Play Store.
A: The Pro version is discontinued unfortunately, due to security reasons.
To change to the Unlocked version, please, do the following:
- send me the purchase number of the Pro and I'll send you a promotional code which you can use to unlock the free version
[18] Q: In-App Purchase fails. Why?
A: It's a Play Store app issue probably which happening on some devices.
Please make sure you are connected and restart the device. Other method can be to uninstall the Play Store updates and try with an older version of the Play Store app. It often helps.
[19] Q: I bought the app by IAP but it's still locked. Why?
A: It's a Play Store app issue probably which happening on some devices when not connected to the internet.
Please make sure you are connected and restart the device. Moreover, do you have more than one Google account registered on your device? That can cause the issue too, that you bought the app under a different account. Other method can be to uninstall the Play Store updates and try with an older version of the Play Store app. It often helps.
[20] Q: After some time the phone does not wake up. Why?
A: I'd check any kind of battery saving methods your device may use currently. Probably that disables the sensor after some time.
Moreover, make sure that the Turn screen on by motion timeout is set properly. Please visit: https://dontkillmyapp.com/
[20] Q: I cannot uninstall it. Why?
A: You have to press the uninstall button in the app, not in Play Store or in Android settings. If still no luck reboot your device and try again .
[21] Q: The POWER BUTTON SUPPORT option does not work for me. Why?
A: You have to change the screen timeout from AUTO to another value in Android settings and do a reboot.
[22] Q: The fingerprint sensor does not work, instead I have to type my pin every time. Why?
A: This is an Android thing, for developers the Smart lock features are not supported. That's why we have to use workarounds.
Using the FINGERPRINT UNLOCK, SMART LOCK SUPPORT option should solve the issue but you may have to wait about 5-10 seconds for the complete turning off with the Timeout method.
The Accessibility method is recommended to choose above Android 8.
Root your device to make this workaround perfect. In this case the turning off will be instantaneous.
[23] Q: Why does the screen only turns black but not turning completely off?
A: It's because you have selected the Timeout method of the SMART LOCK SUPPORT option and your device is not rooted. This is an Android thing, for developers the Smart lock features are not supported. That's why we have to use workarounds. Using the SMART LOCK SUPPORT option you have to wait about 5-10 seconds for the complete turning off.
Root your device to make this workaround perfect. In this case the turning off will be instantaneous.
[24] Q: The app is paused when I got a notification from an app which is on the Exclude Apps list. Why?
A: To avoid this issue, you have to grant the app an extra permission in Settings - Notifications - Notification Access
[25] Q: Why the screen timeout is changed by the app?
A: The Keep Screen On by Motion feature extends the timeout always an extra amount of time to keep the screen on when motion is detected. The timeout resets when the screen is turned off.
This method is used only for Xiaomi and Samsung devices above Android Pie.
[26] Q: The app stops working on MIUI (xiaomi redmi) after some minutes. Why?
A: To solve the issue please visit: https://dontkillmyapp.com/
[27] Q: The Turn Screen On features does not work on Samsung S8 or S8+. Why?
A: Luckily there is a very easy and quick fix! You just have to go to the edge light settings on your phone and there you can select which apps are affected by the edge light. So if you turn it off Gravity Screen in this list the notification of the app will get handled by android again, not Samsung's system. So this means that it will turn on the screen again!
Here is a video made to show the bug and how to fix it: https://youtu.be/WSSKvMrx7X0 (Thanks for finding the solution: Kitt3120)
[28] Q: The app stops working on Nokia Oreo. Why?
A: Because of a bug in the power saving method of Nokia devices, background processes are closed even if they are protected.
To overcome this issue you have to do the followings:
In Settings/Apps => Show system apps - deactivate these two packages:
- com.evenwell.powersaving.g3
- com.evenwell.powersaving.g3.overlay.base.s600ww
Please visit: https://dontkillmyapp.com/
[29] Q: The app stops working on Huawei EMUI 8. Why?
A: Because of a bug in the power saving method of Huawei devices, background processes are closed even if they are protected.
To make the app work on EMUI 8 you have to do the following:
Settings --> Battery --> Launch. Find GS there, click on it, open every option (which also includes "Run in background") and let it say "Manage manually".
Please visit: https://dontkillmyapp.com/
[30] Q: The app stops working on Android 9. Why?
A: Because of a bug in the power saving method, background processes are closed even if they are chosen to be not optimized.
To solve this issue you have to grant Gravity Screen access to notifications in: Menu - Permission Control
Please visit: https://dontkillmyapp.com/
TROUBLESHOOT
- make sure the app is installed on internal memory card; external sd cards can cause many kind of problems
- if it looks like the app stopped working correctly do an uninstall, re-install and a reboot
Interesting! Downloading and testing...
Great app, testing it now. For the proximity function, shouldn't the drain be higher because when the phone is in the pocket the proximity sensor is always on?
mliou said:
Great app, testing it now. For the proximity function, shouldn't the drain be higher because when the phone is in the pocket the proximity sensor is always on?
Click to expand...
Click to collapse
Yes, that's right. When it's turned off by proximity, there is no significant drain.
Great app :good: this is exactly what i was looking for :victory:
what benefits offers me the pro version??
Acousticbeatz said:
Great app :good: this is exactly what i was looking for :victory:
what benefits offers me the pro version??
Click to expand...
Click to collapse
You can live with the free version quite well. But by buying the paid version your life will be easier little bit:
- you can drop your phone face down onto your undone bed and your screen will turn off
- when you wake up and hardly find your phone the screen will turn on automatically at the moment you grab it and no need to find any button
Probably there are more advantages, but I could recall only these at the moment
Some feedback
1- Pocket sensor
*** gravity - can turn off but can't turn on.
*** proximity - can't even turn off
2- Table Sensor
*** gravity - can turn off but can't turn on
*** proximity - working (both face down/up and off/on)
3- Turn Screen On by Motion
*** not working for both gravity and proximity (unless swiping finger over the proximity sensor)
4- Keep Screen On by Motion
*** not working at all (even after change the sensitivity)
Request
Keep Screen On by Angle - Sometimes, i didn't hold my phone. Just put on the table in standing position. So, 0-10 degree will off the screen while higher than that will keep the screen on. No need to keep shaking
I'm on Motorola Defy CM7.2 btw. Keep your good work :good:
plexnor said:
You can live with the free version quite well. But by buying the paid version your life will be easier little bit:
- you can drop your phone face down onto your undone bed and your screen will turn off
- when you wake up and hardly find your phone the screen will turn on automatically at the moment you grab it and no need to find any button
Probably there are more advantages, but I could recall only these at the moment
Click to expand...
Click to collapse
sounds good... and already purchased
plexnor said:
Yes, that's right. When it's turned off by proximity, there is no significant drain.
Click to expand...
Click to collapse
Do you mean check the box for "Turn Screen OFF by Proximity" or uncheck the box?
its a really nice app, thank you.
one question:
if i put my galaxy nexus in the pocket, it turns off and then it turns on immediatly.
sometimes it won´t even turn off. if i rotate it in my hand and cover the brightness
sensor it will definitely turn off.
if the galaxy nexus rotates in my pocket (sometimes it is on the side) then it turns
on.
is this a bug or do i have to wrong settings.
thank you
antukubo said:
Some feedback
1- Pocket sensor
*** gravity - can turn off but can't turn on.
*** proximity - can't even turn off
2- Table Sensor
*** gravity - can turn off but can't turn on
*** proximity - working (both face down/up and off/on)
3- Turn Screen On by Motion
*** not working for both gravity and proximity (unless swiping finger over the proximity sensor)
4- Keep Screen On by Motion
*** not working at all (even after change the sensitivity)
Request
Keep Screen On by Angle - Sometimes, i didn't hold my phone. Just put on the table in standing position. So, 0-10 degree will off the screen while higher than that will keep the screen on. No need to keep shaking
I'm on Motorola Defy CM7.2 btw. Keep your good work :good:
Click to expand...
Click to collapse
For keeping screen on, try the booster option. That's the only option.
Request: Turn off some settings when it's charging as my phone is flat on a surface and it is quiet annoying when I turn phone on it has a very short display timeout (due to tablet sensor)
antukubo said:
4- Keep Screen On by Motion
*** not working at all (even after change the sensitivity)
Click to expand...
Click to collapse
mliou said:
For keeping screen on, try the booster option. That's the only option.
Click to expand...
Click to collapse
Thanks. That trick works! I wonder why i didn't try that before
antukubo said:
3- Turn Screen On by Motion
*** not working for both gravity and proximity (unless swiping finger over the proximity sensor)
Click to expand...
Click to collapse
After playing a bit more, found that it is partially working on proximity. When facing down, it works. But while facing up, it is not working. Unless i face it down again, then the screen will turn on by motion.
Now, monitoring the battery usage. Hopefully it will not drink too many juice...
Can upload apk please? Stupid play store won't allow me to install, says incompatible.
Acousticbeatz said:
sounds good... and already purchased
Click to expand...
Click to collapse
It's great, thanks
mliou said:
Do you mean check the box for "Turn Screen OFF by Proximity" or uncheck the box?
Click to expand...
Click to collapse
Yes, I mean keep the "Turn Screen OFF by Proximity" check box checked and after switch off the phone by the proximity sensor. You can do this by placing your phone face down or put it into your pocket when you want to turn the screen off. In this situations the proximity sensor will be activated and the screen will be turned off by it.
an0nym0us_ said:
Can upload apk please? Stupid play store won't allow me to install, says incompatible.
Click to expand...
Click to collapse
Hm, interesting why it doesn't allow you to install it ... I attached the file.
myhrdak said:
its a really nice app, thank you.
one question:
if i put my galaxy nexus in the pocket, it turns off and then it turns on immediatly.
sometimes it won´t even turn off. if i rotate it in my hand and cover the brightness
sensor it will definitely turn off.
if the galaxy nexus rotates in my pocket (sometimes it is on the side) then it turns
on.
is this a bug or do i have to wrong settings.
thank you
Click to expand...
Click to collapse
This is an issue with the proximity sensor. Unfortunately it looks like the sensor on your phone cannot recognize well the material of your trouser. If it happens quite often; the solution is to uncheck the "Turn screen ON by proximity" feature. In this situation when you place your phone into your pocket the screen will turn off and the proximity sensor will be inactive after. You can wake up your device by motion only after this. Downside: it costs more energy.
If the phone is often on its side in your pocket try to increase the pocket sensor angle. If it's still turning on, the only way is too keep your phone not to turn on its side or switch off the "turn screen on by motion" feature and in that case the phone will only turn off automatically which is still not too bad.
This app is so good!! I will report my experience
Hey there folks!
Since MiA1 does not have double tap to wake, or you just want funcionality of waking screen and be ready to go with ANY flip case you
might have bought (and screen off when you close it) here is a simple guide to achive so, i have been testing it for 5 days and so far it works flawlessly.
So far im getting only 1% of battery usage overall, meaning the app itself is NOT keeping CPU awake, only the proximity sensor to determine if the case
is closed or not. Really battery friendly overall. Dont know the bad reviews on PlayStore - people moan about anything these days and app does not
work well with any device, but with A1, its a bingo.
1. remove your lockscreen security (set to none) - this is up to you! If you have your phone with you at all times, it
removes the need to do extra steps (draw pattern, PIN, etc...). If you prefer to open case and be taken to locksceen, skip this step!
2. install "EveryCover" DOWNLOAD - !app is add supported! - also, there is paid version which i have so i support the dev, but free one works just as well!
- enter ap and activate the service (works by using Device Admin)
- tick "Auto start at Boot" - so service keeps running after restart
- tick "Service in notification bar" - it will prevent app to be killed by system - more on that later!
- you can even set the time period in which app is inactive (ex. - when you sleep at night)
3. Test the funcinality. Just open and close your case, like you normally would (not 2 times in 1 secs, right ). In my testing of daily usage it almost never "misses".
The screen on is almost instant when you flip the case and screen is set to off after 1 sec of closing case. I tested many many times to see if the screen really switches off, and it
works great. I will also mention that it seems to work even in almost pitch dark (!) and no problems on indoors on evenings etc... It seems that the app is really good at listening to
sensor, or we have a really good proximity sensor on A1!
OPTIONAL STEPS:
Now if you are perfectionist or just like me, 2 things may bother you with this setup, and i will also explain steps how to deal with them.
4. persistant notifications - if you enabled "Service in notification bar" there will be constant notification which may bother you. To deal with this, just long press
on the notification and switch the toggle to the right. (or you can go to app settings and do the same, turn off notifications)
5. "EveryCover running in the background" notification - the last problem you may encounter, altho only the visual one, can be pain to watch. To disable this notification just download this app:
HERE!
Just enter app, grant permission, select "Press to select apps" and choose EveryCover.
You are done! This way, you have:
- working screen on/off solution for ANY flip case
- clean status bar without unnecessary notifications
- persistant service that will NOT be killed by system or after restart
- all that with only 1% of battery usage and no impact on performance what so ever.
Dislclaimer; I am not a dev of any apps mentioned here.
Cheers, hopefully this helps someone!
Magnetic wake / sleep works if you can find a case with magnet placed at correct place built in case.
Phone wakes and sleeps when opened or shut automatically with this feature. Don't be confused with smart cases as not the same thing. I'm late with this reply but works with many phone Inc all my xiaomi phones
After updating to Android 10 about 2 weeks ago, I've been having issues with the fingerprint scanner. When the screen is off I need to tap the sensor twice for it to unlock, but when the screen is on, it unlocks on the first time. I also have issues with the fingerprint swipe down for notification gesture as it doesn't work 50% of the time when the phone is unlocked, but it usually begins to work after a couple of minutes. Does anyone else have this issue with their Zenfone 6? I am in the US btw.
I think in general the the os lags a bit with this update I have the same problems with the fingerprint sensor it's not all the time I only notice it if the phone is lagging at times. Usually I restart it and it goes away
I'm thinking of hard resetting the phone to see if that helps
Sent from my Asus Zenfone 6 using Tapatalk
Sahilnater19 said:
After updating to Android 10 about 2 weeks ago, I've been having issues with the fingerprint scanner. When the screen is off I need to tap the sensor twice for it to unlock, but when the screen is on, it unlocks on the first time. I also have issues with the fingerprint swipe down for notification gesture as it doesn't work 50% of the time when the phone is unlocked, but it usually begins to work after a couple of minutes. Does anyone else have this issue with their Zenfone 6? I am in the US btw.
Click to expand...
Click to collapse
I cannot confirm, but I have these setting:
Settings / Security & lock screen / Device security / Screen lock - gear icon
- Automatically lock - Immediately after sleep
- Power button instantly locks - On
there's an update today on my phone.
1. Fixed an issue where ASUS Launcher and Settings may not work occasionally
2. Improved the reliability of Fingerprint to unlock the device
3. Optimized system stability
Appears to be an issue with the Always on Display. Disabling that should resolve the issue.
See detail below;
Frozen screen - Android Auto Community
by the way feel free to spam their support email as this issue has been going on too long!
[email protected]
Solution : enable developer options, and enable keep screen on while charging.
yup screen on = no Always on display..
though also battery and burn in aint good...
Screen will remain on, but brightness will drop to minimum level as the phone is left idle. When looking at the phone while driving, it looks almost off, the home screen is barely visible.
would be great if someone could build a tasker or Automate task that turned off AOD when AA is running.. though you prob need Root..
Anyone having a issue after C62 update of it just now not connecting at all?
jipp here.
android auto refuses the connection after the update.
My head unit is trying to connect while oppo is asking which usb type should be choosen (load/ android auto/mtp or so)
Selecting android auto results in a connection abort and a short vibration.
Already cleared app data, cache and even reinstalled android auto with no effort.
wow oppo really sucks..
just got CPH2025_11_C.53 - android auto is working flawless again
tomatojoe said:
just got CPH2025_11_C.53 - android auto is working flawless again
Click to expand...
Click to collapse
53? or 63? i just got 63 last night?
I'm sorry, made a typo, meant: CPH2025_11_C.63
Hi guys,
I have a Find X2 Lite with CPH2005VF_11_C_78..
after the android 11 update android auto start to freeze switching apps (ex from maps to spotify a 15 seconds black sceen) or when navigating has to turn direction (the cursor start flickering and after a while the navigation resume).
Is this a similar problem to yours? any suggestion?
my oppo f1s always turn off even after restart, how to fix my boss?
Images on the lock screen, crash the Android Auto. It is an OS problem. Here is what to do, till the problem is solved :
-Go to Settings, Security, Smart Lock and and your car a trusted device. That way you have your phone unlocked while driving and fingerprint disappears.
(You can also remove fingerprint from lock screen by going to Settings, Passwords & Biometrics, Fingerprint, Screen-off unlock and select off, but then you have to wake up your phone before being able to use fingerprint)
-Go to Settings, ..Always-On Display, Always-On Display and disable it. (You can also select Always-On Display with battery saver, which turns off image after some seconds, but on those seconds, the Andriod Auto is crashed)
@[email protected]$#[email protected]& OnePlus, OPPO and Color OS...
Same thing at OnePlus 8T with OxygenOS 12 (which is ColorOS 12).
After update to 12 I still have some problems with AA. Now phone is totally unusable (totally laggy or black screen) when connected to AA and after when disconnected - must wait ca. 5 min or restart phone.
But... After reading this tread I turn off AOD. And stil same. Then I turn off also fingerprint reader at turned off display. And... Everything works perfectly
Will test AOD on, FP on and Smart Lock at my car. But OPPO is a joke...