How to flash
If you have installed Twrp then go-to TWRP recovery and tap on install and then tap on flash img select "RecoveryStock" & tick recovery and swipe right to flash and reboot to stock recovery. Video is here
Second Method by Fastboot
As all you know go-to your PC install adb and Fastboot repos & reboot your phone to bootloader by pressing power+ down button for few second. Connect phone to PC & open command prompt in a folder where stock recovery is copied & execute this command
Fastboot flash recovery STOCKRecovery.img
All done.
Warning
After flash you will have to wipe all user data to go-to system.. otherwise you will be back on recovery again . So backup your data 1st
1. This Recovery is for ColorOS 6 Android 9 users.
Download https://drive.google.com/file/d/1-0S_bAPvF3_MkErpL4jyZXQdZ8G5aYfV/view?usp=drivesdk
2.Stock recovery for RealmeUI android 10 users.
https://drive.google.com/file/d/1KNNkONNpZseEsJMK2OpY1cSmsYw4BlTH/view?usp=drivesdk
update Stock Rom
If you want to update your device to latest version with this stock recovery then download this latest stock update zip from link
DOWNLOAD
file not found stock recovery rmx1911
please give me stock recovery rmx 1911
https://drive.google.com/file/d/1-0S_bAPvF3_MkErpL4jyZXQdZ8G5aYfV/view
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bro after bootloader unlock my lock screen and fingerprint not working after click screen black
sumeetsk2 said:
Bro after bootloader unlock my lock screen and fingerprint not working after click screen black
Click to expand...
Click to collapse
After unlocking bootloader screenlock & FP doesn't work.. you can use Privacy lock to Lock your personal Apps...
& Tell me when screen becomes black; what you do to bring it back ? Press power button or reboot? If it needs reboot , you should factory reset your phone using recovery, it may help you ..
[remember] No screen Lock security will work on unlocked bootloader ColorOS . You will need to Re-lock bootloader to secure your device
itsnomy said:
After unlocking bootloader screenlock & FP doesn't work.. you can use Privacy lock to Lock your personal Apps...
& Tell me when screen becomes black; what you do to bring it back ? Press power button or reboot? If it needs reboot , you should factory reset your phone using recovery, it may help you ..
[remember] No screen Lock security will work on unlocked bootloader ColorOS . You will need to Re-lock bootloader to secure your device
Click to expand...
Click to collapse
https://forum.xda-developers.com/realme-5/how-to/realme-5-lockscreen-fix-magisk-fix-t4023421
Its working?
sumeetsk2 said:
https://forum.xda-developers.com/realme-5/how-to/realme-5-lockscreen-fix-magisk-fix-t4023421
Its working?
Click to expand...
Click to collapse
Yes working for only ColorOS version A.20
Check your version if it's less or greater then A.20 then it would not work... But if you want to be on A.20 version then download it's twrp backup from https://drive.google.com/file/d/16SxkonLfPmJ4qR7beQchvCrwyLXhPj5J/view?usp=sharing & restore via twrp custom recovery then use that fix https://forum.xda-developers.com/realme-5/how-to/realme-5-lockscreen-fix-magisk-fix-t4023421
pls help... when i reboot my rmx1911 in twrp it says (no OS installed) what do i do now
You should re-install stock rom.
help
i install stock recovery with fastboot, and i enter recovery mode but back again to fastboot
please help
hello, i am stuck with imei:null and no wifi. can u please help? the OS version is RMX1911EX_11_A.29 and unknown baseband.
Pls give me boot.img file for realme 5 RMX1911
Bro i try in custom recovery my custom recovery removed
and stock recovery doesnt install
I have a problem
when i put root on my realme 5 rmx1927 it became a brick
no recovery is put, it just reboots into fastboot
tried to flash through the realme flash tool, but gives the error "Cannot find central directory"
I hope you can help me, thanks in advance
KOTEL2547 said:
I have a problem
when i put root on my realme 5 rmx1927 it became a brick
no recovery is put, it just reboots into fastboot
tried to flash through the realme flash tool, but gives the error "Cannot find central directory"
I hope you can help me, thanks in advance
Click to expand...
Click to collapse
You need to flash vbmeta_mod too in case to root your phone...
[QUOTE = "itnomy, post: 84188999, member: 8056346"]
Вам также нужно прошить vbmeta_mod на случай рутирования телефона ...
[/ QUOTE]
Прошивал все что можно но ничего не устанавливается
кроме одного сока рекавери, но толку от него вообще нет
при попытке обновления через него выдает "поданную установку"
If relme 5 does not have anything to sew and it constantly reboots into the bootloader
What did I do
First, I wrote the command "fastboot erase userdata" in fastboot
Then we go to the site https://github.com/acervenky/realmefastboot
And download fastboot images for realme 5i
Then we unpack the archive
Then we go into PowerShell (I only got it to flash my phone)
And we prescribe "adb"
After we write "fastboot flash boot boot.img" and insert boot from our previously unpacked archive
The following command is "fastboot flash dtbo dtbo.img"
Then "fastboot flash vbmeta vbmeta.img"
After downloading twrp from w3bsit3-dns.com
And we sew it "fastboot flash recovery twrp.img
After we reboot the phone in recovery
And we roll back to the 9th android
How to roll back to 9k eats on w3bsit3-dns.com
At first I stitched everything through fastboot, but through it there was nothing. I do not know why they were stitched through PowerShell and it was from the realme 5i archive, but the main thing is that it was stitched
Initially, I downloaded the fastboot images realme 5i archive to try to flash through adb run, but I just didn’t flash it, it just wrote no devices and that's it
Then I tried to flash through fastboot with the commands, as usual, they flash the recovery and I will only write system instead of recovery and so on
But even there it gave an error invalid sparse file format at header magic
And then I thought, why not take boot vbmety and dtbo from here. I took it through fastboot did not work
Well, after that, for fun, I decided to try it through PowerShell (somewhere I saw that they sewed that way too) and surprisingly everything turned out
You need to install fastboot drivers
Hello, do you have a stock recovery for OS version: rmx1911ex_11_C.69 (the latest update for realme 5), or can you teach me how to extract the recovery.img from my phone.
I need it because it seems magisk doesnt work if I try to patch the "realmeUI recovery for android 10 users" that you provided.
Related
Hi guys,
I'm in a trouble....
I own a TL10 phone..
flashed international system and recovery and fastboot..
after rebooting..
now is in rescue mode
"error:
func NO: 10 (func_boot_recovery)
ERROR NO 2"
tried to connect to hisuite tool but it doesn't recognise the device...
tried a restore holding power + vol+ + vol-
but it fails..
any help?
http://s9.postimg.org/ohcdko8lb/image.jpg
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is the bootloader locked still?
If unlocked, try pushing twrp recovery with adb and install a custom ROM from twrp. If you can do that, you could recover it back to stock.
If bootloader is locked, try adb to reflash stock recovery and install a genuine OS from SD.
You may have messed up the partitioning..
Nope
RobboW said:
Is the bootloader locked still?
If unlocked, try pushing twrp recovery with adb and install a custom ROM from twrp. If you can do that, you could recover it back to stock.
If bootloader is locked, try adb to reflash stock recovery and install a genuine OS from SD.
You may have messed up the partitioning..
Click to expand...
Click to collapse
What are the adb commands for installing twrp recovery?
fastboot flash recovery twrpxxxxx.img
?
Thank You.
fooshack said:
Nope
Click to expand...
Click to collapse
I have to turn unlock bootloader
Fastboot oem unlock *************
Flash recovery
I've got same problem on my mt7-L10.
nothing makes slove this problem.
It won't go into recovery mode even any recovery image flashed with successfully.
sure 3 buttons never work.
but DC Phoenix software by dc unlocker team gives it alive again.
now my phone working.
try to use this software but not free.
only dc unlocker user can use this free software.
appeared discounted Recovery ... download official firmware. Remove it from the system.img.Ask fastboott by ADB ...
Fastboot flash recovery.img
Fastboot flash system.img
---------- Post added at 05:02 PM ---------- Previous post was at 04:56 PM ----------
appeared discounted Recovery ... download official firmware. Remove it from the system.img.Ask fastboott by ADB ...
Fastboot flash recovery.img
Fastboot flash system.img
В мене така сама проблема..я скачав офіційну прошивку вилучив з неї system.img. через huawei excreator...
Через adbfastboot.. установив стоковий stock recovery... після чого я через adb fastboot установив system.img
Телефон huawi mate 7 перезагрузився і включився.
Вибачте за англійську..
Реально робить
I had the same issue when attempting to update to MM (probably because I stupidly tried flashing the OTA package through TWRP).
You need to get into fastboot mode (power + volume up I think), once you're in there push ADB commands as follows:
*I'm skipping bootloader unlock because I did that long ago, can't remember the process*
-After you have downloaded a stock recovery and the ROM of your choice push the following command: adb flash recovery yourrecovername.img
-When that's done and your ROM is on your SD card in the dload folder, press and hold both volume buttons + power, an EMUI screen will pop up and the device will start updating / restoring.
REMEMBER: Plug the phone out of the PC before you perform the "update", otherwise the progress will get stuck at 5%.
This is Ported TWRP Recovery from a same MT6757 chipset model--------------------------------------------------------------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer
Your warranty is now void.:laugh:
I am not responsible for bricked devices, dead SD cards,thermonuclear war.
Please do some research before flashing it!
YOU are choosing to make these modifications.
you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
How to Flash
- Download the Latest TWRP Recovery Image Attached.
- Flash it via fastboot cmd or via sp flash tool.
- If you want stock recovery then flash stock recovery image with SP tool.
- It is recommended to flash TWRP via FASTBOOT.
How to use SP flash tool
- Install Vcom media tek driver on your pc.
- Boot into meta mode.
- More detail and download available on SPFT
BUGS
Nothing with my device.
Tell me if you found.
DOWNLOAD
Latest TWRP here
Note: This recovery is Android Version sensitive which means it only supports Nougat(7.x) firmware not Oreo(8.x) or Pie (9.x). Flashing this on k8+ running Oreo may brick your device.
THANKS
@GEEKOFIA for porting & customizing.
Arisch for his K8 Plus
GOOGLE for everything.
XDA for publishing.
OFFICIAL COMMUNITY
Official Telegram Group
Official Telegram Channel
======== GEEKOFIA ========
VISIT
Requirements
1. Your Bootloader must be unlocked.
2. This TWRP is strictly for k8+ running on only nougat firmware (Android 7.x).
3. Internal Storage will be wiped.
Bugs
1. Nothing
2. You tell me
Note: This recovery is Android Version sensitive which means it only supports Nougat(7.x) firmware not Oreo(8.x) or Pie (9.x). Flashing this on k8+ running Oreo may brick your device.
Instructions
1. Go to the fastboot mode.
2. Now paste the recovery in adb folder.
3. Open the cmd by holding shift and press right click in adb folder and then click open powershell window here.
4. Now to confirm that device is connected by typing :-
Code:
fastboot devices
If your device seriel no. appers then it is okay.
6. After that type:-
Code:
fastboot flash recovery twrp-recovery-name.img
7. Now unplug your device and then hold power button till it turns off and then hold volume (-) after that press power button to boot into bootloader then choose recovery mode.
Now you are in TWRP mode.
Note:- After flashing recovery you must have to wipe Internal Storage(format data > yes) to remove encryption. Also, you must have to flash magisk so that it will patch boot.img through which system will not be able to overwrite TWRP again.
Download
TWRP
MAGISK
Q&A
Q: What is the dycrept password?
A: Click on cancel after that format data to remove this permanetly.
Q: Is the Screen black after booting to twrp ?
A: Yes,it is on locked state by default,you have to press power button to unlock it.
OFFICIAL COMMUNITY
Official Telegram Group
Official Telegram Channel
======== GEEKOFIA ========
VISIT
Pls guide
Hi i am a newbie to rooting. Could you please give me detailed steps. I understood till the point of flashing twrp. After that do I have to wipe data and flash magisk right then? (I have tried installing twrp 2 times but every time after installing and restarting it shows android recovery only.)
One more thing, will I be able to upgrade to oreo through OTA if I have the stock android recovery ( although bootloader is unlocked)?
akiitd94 said:
Hi i am a newbie to rooting. Could you please give me detailed steps. I understood till the point of flashing twrp. After that do I have to wipe data and flash magisk right then? (I have tried installing twrp 2 times but every time after installing and restarting it shows android recovery only.)
One more thing, will I be able to upgrade to oreo through OTA if I have the stock android recovery ( although bootloader is unlocked)?
Click to expand...
Click to collapse
You need to boot your device (lenovo k8 plus) from this twrp. To do this type following code in cmd.
Code:
fastboot boot twrp-name.img
This will boot you to recovery mode (just wait couple seconds),the screen may be black if so,then press the power button and swipe to unlock the recovery screen. Now you have to flash the same twrp-recovery.img file into recovery partition.
If you don't flash twrp-recovery image during that live recovery session,you will not be able to reboot to twrp recovery again.
But if you don't want twrp recovery permanently,just need root access,then you can flash only magisk .zip during this live session and reboot your phone and install magisk manager apk and patch the stock boot image.By this process your phone will have root access without a TWRP recovery.
GEEKOFIA said:
You need to boot your device (lenovo k8 plus) from this twrp. To do this type following code in cmd.
Code:
fastboot boot twrp-name.img
This will boot you to recovery mode (just wait couple seconds),the screen may be black if so,then press the power button and swipe to unlock the recovery screen. Now you have to flash the same twrp-recovery.img file into recovery partition.
If you don't flash twrp-recovery image during that live recovery session,you will not be able to reboot to twrp recovery again.
But if you don't want twrp recovery permanently,just need root access,then you can flash only magisk .zip during this live session and reboot your phone and install magisk manager apk and patch the stock boot image.By this process your phone will have root access without a TWRP recovery.
Click to expand...
Click to collapse
Thank you.
1. What did you mean by "Now you have to flash the same twrp-recovery.img file into recovery partition." Please give detailed steps of how to do that once I reach the twrp screen after flashing twrp. sorry but I am new to all this
2. I have now rooted my phone by flashing patched_boot.img from dhruv aggarwal's post. Now how do I install twrp without losing root? Please give detailed steps(like what command, recovery mode or not...). Can I just flash the twrp.img file you have provided in the post using flashify app?
sorry for troubling you.
akiitd94 said:
You need to boot your device (lenovo k8 plus) from this twrp. To do this type following code in cmd.
Thank you.
1. What did you mean by "Now you have to flash the same twrp-recovery.img file into recovery partition." Please give detailed steps of how to do that once I reach the twrp screen after flashing twrp. sorry but I am new to all this
2. I have now rooted my phone by flashing patched_boot.img from dhruv aggarwal's post. Now how do I install twrp without losing root? Please give detailed steps(like what command, recovery mode or not...). Can I just flash the twrp.img file you have provided in the post using flashify app?
sorry for troubling you.
Click to expand...
Click to collapse
If you have root access then install flashify apk and choose the twrp image you want to flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or TWRP3.x for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
NOTE:
This Recovery is Built from sources. It's Not a Port. It is Tested and working fine.
INSTALLATION:
1. Download Recovery.img from below
2. boot into fastboot
3. Type these commands one by one:
"fastboot flash recovery recovery.img"
"fastboot oem reboot-recovery"
For Realme Ui android 10 download file ending with _10.img
Type these commands one by one:
"fastboot flash recovery recovery.img"
"fastboot reboot recovery"
DOWNLOADS:
TWRP
SOURCES:
TWRP
Device tree
BUGS:
NONE
Hit Thanks If You Liked My Work
After flashing twrp recovery realme c2 it's see sending recovery, writing recovery, finished recovery.when type next command fastboot oem reboot-recovery my phone boot my home screen.
Soumen Malik said:
After flashing twrp recovery realme c2 it's see sending recovery, writing recovery, finished recovery.when type next command fastboot oem reboot-recovery my phone boot my home screen.
Click to expand...
Click to collapse
Yess..same thing I am also experiencing...
SÀẞYÁSACHI said:
Yess..same thing I am also experiencing...
Click to expand...
Click to collapse
Soumen Malik said:
After flashing twrp recovery realme c2 it's see sending recovery, writing recovery, finished recovery.when type next command fastboot oem reboot-recovery my phone boot my home screen.
Click to expand...
Click to collapse
that depends upon your android version android 9 command doesnt work on a10 & android 10 command doesnt work on a9
Siddk said:
that depends upon your recovery version android 9 command doesnt work on a10 & android 10 command doesnt work on a9
Click to expand...
Click to collapse
Can you plz suggest me the commands through which I can install twrp in realme c2(android 9) rmx 1941...
Siddk said:
that depends upon your recovery version android 9 command doesnt work on a10 & android 10 command doesnt work on a9
Click to expand...
Click to collapse
I had followed all the steps guided by xda, and although and flashing, the results showed finished status, but after That I typed fastboot oem reboot-recovery, it booted to the homescreen directly...and then when I typed "adb reboot recovery" commands, it booted to the stock recovery... please help me
SÀẞYÁSACHI said:
I had followed all the steps guided by xda, and although and flashing, the results showed finished status, but after That I typed fastboot oem reboot-recovery, it booted to the homescreen directly...and then when I typed "adb reboot recovery" commands, it booted to the stock recovery... please help me
Click to expand...
Click to collapse
https://dl.twrp.me/RMX1941/twrp-3.5.0_9-0-RMX1941.img.html
download this & flash through fastboot then boot directly into recovery rebooting to system will revert the recovery
fastboot flash recovery filename.img
fastboot oem reboot-recovery
Siddk said:
https://dl.twrp.me/RMX1941/twrp-3.5.0_9-0-RMX1941.img.html
download this & flash through fastboot then boot directly into recovery rebooting to system will revert the recovery
fastboot flash recovery filename.img
fastboot oem reboot-recovery
Click to expand...
Click to collapse
Thanks, sir...it really worked...
is there any way to install TWRP in realme c2 permanently?
sir i need help twrp not showing up after i successfully flashed the .img file my device is realme c2 rmx 1941 (android 10)
i installed 3.5.1 & 3.5.2
this happened... both of them and whenever i boot to recovery its always realme ui recovery options...
nemesis1941 said:
sir i need help twrp not showing up after i successfully flashed the .img file my device is realme c2 rmx 1941 (android 10)
i installed 3.5.1 & 3.5.2
this happened... both of them and whenever i boot to recovery its always realme ui recovery options...
View attachment 5353883
Click to expand...
Click to collapse
this happened to me also. successful recovery flash, then error in fastboot reboot recovery. i also tried fastboot boot recovery.img, but no luck
any solution on how to fix this problem? @Siddk
nemesis1941 said:
patrickbusto081302 said:
this happened to me also. successful recovery flash, then error in fastboot reboot recovery. i also tried fastboot boot recovery.img, but no luck
any solution on how to fix this problem? @Siddk
Click to expand...
Click to collapse
sir i need help twrp not showing up after i successfully flashed the .img file my device is realme c2 rmx 1941 (android 10)
i installed 3.5.1 & 3.5.2
this happened... both of them and whenever i boot to recovery its always realme ui recovery options..
View attachment 5353883
Click to expand...
Click to collapse
minimal adb will not work with android 10 download tool from below
https://developer.android.com/studio/releases/platform-tools
thank you very much for the help man <3 it worked *3*
Siddk said:
minimal adb will not work with android 10 download tool from below
https://developer.android.com/studio/releases/platform-tools
Click to expand...
Click to collapse
Is this normal?
My Phone Screen Shows
OPPO Verify pass
fastboot unlock verify ok
Cjhay29 said:
Is this normal?
My Phone Screen Shows
OPPO Verify pass
fastboot unlock verify ok
Click to expand...
Click to collapse
Also I have a question
When using volume down + power button it goes into bootloader instead of recovery. Is that normal?
By the way I already unlock the bootloader
Last question
When I already flashed the twrp can I use power button + volume down?
And it is permanently installed?
Cjhay29 said:
Last question
When I already flashed the twrp can I use power button + volume down?
And it is permanently installed?
Click to expand...
Click to collapse
Oppo verify is fastboot screen
No key to boot into recovery directly Blame realme for that
you need to boot into fastboot first then recovery or via magisk manager
Hi,can you help me.. After I reboot using command adb reboot bootloader..it stuck at 'oppo verify pass fastboot_unlock_verify_ok' .. and then I enter fastboot reboot command,and it says waiting for any devices.. I've unlock oem and usb debugging already..
Cjhay29 said:
Also I have a question
When using volume down + power button it goes into bootloader instead of recovery. Is that normal?
By the way I already unlock the bootloader
Click to expand...
Click to collapse
may I know how you unlock the bootloader
Hi,
I successfully unlocked the bootloader and tried to install "lineage-18.1-20210917-recovery-vayu.img", it seemed to go well but on attempted to reboot to recovery, the default MIUI version was re-installed.
I tried a couple more things, can't really remember exactly but all I get now is the FASTBOOT screen.
If I press the POWER button, I get a vibration, then POCO logo and screen then goes to the FASTBOOT screen,
If I press any combination of Vol+/Vol- + Power, I get the vibration, POCO logo then back to FASTBOOT screen.
If I use ./fastboot devices using ADB, the serial # for the X3 Pro displays correctly.
PS C:\Users\parke\Desktop\platform-tools> ./fastboot flash recovery recovery.img
Sending 'recovery' (61996 KB) OKAY [ 1.403s]
Writing 'recovery' OKAY [ 0.128s]
Finished. Total time: 1.549s
Click to expand...
Click to collapse
I've probably without knowing, have corrupted or damaged the boot to partition.
I'm a newbie with X3 Pro mobile, can anyone please assist me.
Thanking you in anticipation.
Cheerz
i don't know how can i really help you with that, what i do know is that since you can access fastboot mode, MAYBE you can reinstall the stock miui rom by flashing with miflashtool, please follow munchy's video on youtube, he explained it well and I'm sure you can follow it.
van_ said:
i don't know how can i really help you with that, what i do know is that since you can access fastboot mode, MAYBE you can reinstall the stock miui rom by flashing with miflashtool, please follow munchy's video on youtube, he explained it well and I'm sure you can follow it.
Click to expand...
Click to collapse
Thanks van_, followed munchy on youtube as you suggested. and got X3 Pro out of Fastbbot mode.
Do you have a ROM that you recommend, just require it to be light and stable?
Cheerz
KenMar said:
Hi,
I successfully unlocked the bootloader and tried to install "lineage-18.1-20210917-recovery-vayu.img", it seemed to go well but on attempted to reboot to recovery, the default MIUI version was re-installed.
I tried a couple more things, can't really remember exactly but all I get now is the FASTBOOT screen.
If I press the POWER button, I get a vibration, then POCO logo and screen then goes to the FASTBOOT screen,
If I press any combination of Vol+/Vol- + Power, I get the vibration, POCO logo then back to FASTBOOT screen.
If I use ./fastboot devices using ADB, the serial # for the X3 Pro displays correctly.
I've probably without knowing, have corrupted or damaged the boot to partition.
I'm a newbie with X3 Pro mobile, can anyone please assist me.
Thanking you in anticipation.
Cheerz
Click to expand...
Click to collapse
Is your bootloader really unlocked??? Have you seen an unlocked lock while booting earlier or the unlock tool showed "unlocked" when connecting mobile to it?
If yes, then:
- grab a good recovery image file (can be for instance OrangeFox on its official website, for Poco X3 PRO there is a beta available that works fine but for backups) and save it in your PC, on same of fastboot folder
- turn on your mobile on fastboot, plug to PC, wait a few seconds, type the fastboot command to list devices as you wrote....confirm you find mobile.
- now fastboot flash the recovery image to RECOVERY. See if finish with no error.
- now reboot to RECOVERY, not to system (Android, normal boot). Can do this issuing a fastboot command only OR by holding Vol+ and then power (keep Vol+ till recovery screen appears).
After flashing recovery image if you start booting to system the MIUI kills the recovery. Probably that is what happened to you.
Now under recovery format data (the menu you have to type "yes" ) and then you can connect/mount data to PC and transfer LOS zip (and Gapps, Magisk) and flash. Or can use USB OTG. Or can let zip files on SD Card on tray.
The bootloader is unlocked, I see the unlocked symbol at bootup.
Tried TWRP and OrangeFox so revovery seems to be working.
KenMar said:
The bootloader is unlocked, I see the unlocked symbol at bootup.
In recovery, I formated data, typed yes but if I try to boot back into OrangeFox, the stock muiu Fastboot has replaced OrangeFox Recovery.
Click to expand...
Click to collapse
On PC: unzip the OrangeFox zip and get the file recovery.img to the fastboot program folder
On mobile: put in fastboot mode
On PC: open cmd on the fastboot folder and type
fastboot devices
fastboot flash recovery recovery.img
fastboot reboot recovery
On mobile (will be in OrangeFox):
wipe cache
wipe dalvik
format data (typing "yes" )
reboot to RECOVERY
....now will reboot back to OrangeFox
transfer zips by MTP or plug OTG (and mount it!)
flash zips
format data (typing "yes" )
reboot to SYSTEM
One important point: are you flashing LOS 18.1 (Android 11)? If so be sure your current MIUI is v12.5.1 or newer.
Hi,
Thanks for taking the time to write your detailed information, much appreciated.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I was able to install TWRP and ArrowOS and all seems to be running smooth and stable.
Cheerz
wilsonhlacerda said:
On PC: unzip the OrangeFox zip and get the file recovery.img to the fastboot program folder
On mobile: put in fastboot mode
On PC: open cmd on the fastboot folder and type
fastboot devices
fastboot flash recovery recovery.img
fastboot reboot recovery
On mobile (will be in OrangeFox):
wipe cache
wipe dalvik
format data (typing "yes" )
reboot to RECOVERY
....now will reboot back to OrangeFox
transfer zips by MTP or plug OTG (and mount it!)
flash zips
format data (typing "yes" )
reboot to SYSTEM
One important point: are you flashing LOS 18.1 (Android 11)? If so be sure your current MIUI is v12.5.1 or newer.
Click to expand...
Click to collapse
Hello everyone, how can I flash the phone Tecno Pova 4 I'm trying a lot of information no where, maybe you know or tell me how to flash the phone
What do you want to change, ROM or Recovery or what else?
jwoegerbauer said:
What do you want to change, ROM or Recovery or what else?
Click to expand...
Click to collapse
I need to get root
Xryst1k said:
мне нужно получить рут
Click to expand...
Click to collapse
And I don't have boot and vbmeta, since my firmware is not on the internet. Or I didn't find it
Phone runs on Android 12, HIOS., correct?
If so, look inside here:
jwoegerbauer said:
Phone runs on Android 12, HIOS., correct?
If so, look inside here:
Click to expand...
Click to collapse
But, you also need a custom recovery there, and I have a stock one. Maybe there is a guide how to download custom, or please tell me how to do
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jwoegerbauer said:
Click to expand...
Click to collapse
?
A Custom Recovery isn't needed at all!
Flashing the Magisk.ZIP referred to in linked video can get achieved via ADB commands as shown here
Flash zip files from ADB/Terminal(And other commands)
For all of you that code apps on PC that use ADB, if you ever wanted to flash a zip file from your app using the recovery it's quite simple. You've seem ROM Manager do it, now why can't you? Please note that this method can be used in any...
forum.xda-developers.com
All you have to do is to boot phone into Recovery mode, connect powered-on phone via USB-cable with PC and run the related ADB commands.
jwoegerbauer said:
A Custom Recovery isn't needed at all!
Flashing the Magisk.ZIP referred to in linked video can get achieved via ADB commands as shown here
Flash zip files from ADB/Terminal(And other commands)
For all of you that code apps on PC that use ADB, if you ever wanted to flash a zip file from your app using the recovery it's quite simple. You've seem ROM Manager do it, now why can't you? Please note that this method can be used in any...
forum.xda-developers.com
All you have to do is to boot phone into Recovery mode, connect powered-on phone via USB-cable with PC and run the related ADB commands.
Click to expand...
Click to collapse
Well, I hope everything works out, I'll write later
jwoegerbauer said:
Click to expand...
Click to collapse
Hello can you help how to flash the stock rom of pova 4???
Xryst1k said:
Hello everyone, how can I flash the phone Tecno Pova 4 I'm trying a lot of information no where, maybe you know or tell me how to flash the phone
Click to expand...
Click to collapse
Hello, I'm currently using the tecno pova 4 and I am rooted, I could help you
Requirements
PC
boot.img [can be found at naijaroms]
Fastboot adb
Steps
Enable oem unlocking in developer options
Enable usb debugging
Adb devices
Adb reboot bootloader
Fastboot devices
Fastboot flashing unlock
[A confirmation will show on your phone if you are going to unlock the bootloader]
Once unlocked
Fastboot reboot
Your device will be reset after unlocking your bootloader, you need to set up the phone and install magisk
move the boot.img to the phone
open magisk app
click install
Select "select and patch a file"
Select your boot.img
Once patched, move the patched boot.img to your pc
adb reboot bootloader
fastboot devices
fastboot flash boot magiskpatched.img
fastboot reboot
Let me know if you are having issues
arisu69 said:
Hello, I'm currently using the tecno pova 4 and I am rooted, I could help you
Requirements
PC
boot.img [can be found at naijaroms]
Fastboot adb
Steps
Enable oem unlocking in developer options
Enable usb debugging
Adb devices
Adb reboot bootloader
Fastboot devices
Fastboot flashing unlock
[A confirmation will show on your phone if you are going to unlock the bootloader]
Once unlocked
Fastboot reboot
Your device will be reset after unlocking your bootloader, you need to set up the phone and install magisk
move the boot.img to the phone
open magisk app
click install
Select "select and patch a file"
Select your boot.img
Once patched, move the patched boot.img to your pc
adb reboot bootloader
fastboot devices
fastboot flash boot magiskpatched.img
fastboot reboot
Let me know if you are having issue
arisu69 said:
Hello, I'm currently using the tecno pova 4 and I am rooted, I could help you
Requirements
PC
boot.img [can be found at naijaroms]
Fastboot adb
Steps
Enable oem unlocking in developer options
Enable usb debugging
Adb devices
Adb reboot bootloader
Fastboot devices
Fastboot flashing unlock
[A confirmation will show on your phone if you are going to unlock the bootloader]
Once unlocked
Fastboot reboot
Your device will be reset after unlocking your bootloader, you need to set up the phone and install magisk
move the boot.img to the phone
open magisk app
click install
Select "select and patch a file"
Select your boot.img
Once patched, move the patched boot.img to your pc
adb reboot bootloader
fastboot devices
fastboot flash boot magiskpatched.img
fastboot reboot
Let me know if you are having issues
Click to expand...
Click to collapse
proof? send the screenshot here pls
Click to expand...
Click to collapse