Related
All the changes have been merged into CyanogenMod 5.0.7 ! Please do NOT flash any of the current listed versions. I will remove this message if bcrook88, pershoot, or myself updates anything.
Also, I've since release a Spare Parts update for CM5.0.7. Find it here:
http://forum.xda-developers.com/showthread.php?t=688347
Hi all,
Note: This replaces your framework and services.jar, meaning Trackball Alert will not work, custom clock colours will revert, and notification in successions will also not work (since services.jar is replaced).
ALWAYS NANDROID FIRST !
New Post:
Invisible Lockscreen and Custom Message (on lockscreen) by Wysie
Configurable number of recent apps in spare parts by Wysie and bcrook88
15 recent apps layout by pershoot (from which 9 and 12 were derived from)
Further Browser modifications by Wysie:
- Increased max number of tabs from 8 to 16.
Screenshots:
Invisible Lockscreen:
Custom Message:
http://forum.xda-developers.com/showpost.php?p=6466935&postcount=21
Screens for 9, 12 and 15 recent apps:
Config: http://twitpic.com/1nr3hc
9 Port: http://twitpic.com/1nr3m3 | 9 Land: http://twitpic.com/1nr443
12 Port: http://twitpic.com/1nr48p | 12 Land: http://twitpic.com/1nr4gw
15 Port: http://twitpic.com/1nr4m2 | 15 Land: http://twitpic.com/1nr519
Customizable Colours!
All changes: http://twitpic.com/1ouwg8
Ticker (See top): http://twitpic.com/1ouwii
More Changes
Spare Parts: http://twitpic.com/1qoplc http://twitpic.com/1qopmn
Hidden Clock/Diff. Battery % Color: http://twitpic.com/1qoraz
Check attachment for PLMN and SPN !
Old Post:
Been a while since I did anything for Android, so I decided to first tackle one of the problems I have with it, which is, "Why must Android show the red arrows when I make a mistake, even in stealth mode?" I find it quite "insecure" .
Anyway, I know there's a morph to have a invisible lockscreen posted in david1711's thread, but this mod allows it to be an option . Enough talk, here's some screenshots:
More screenshots:
Click to expand...
Click to collapse
Changelog:
250510:
- Added ability to change battery percentage colour
- Added option to hide clock on status bar
- Attempt to fix the percent alignment on D/S devices
240510:
- Implemented 2 additional options.
- "Show unlock message" will hide the "Draw pattern to unlock" message
- "Show unlock error messages" will hide the "Sorry, try again" message
- However, if you get the incorrect pattern, it will still show the 30 seconds countdown. That is not configurable, don't intend to make it configurable as well.
- Removed Browser.apk from package since it's included in CM5.0.7 latest test releases now .
230510:
- Notification items' colours are now changeable. HOWEVER, not all notification items will change, as some of them are implemented in a different way by the app dev themselves . Not sure if I can do anything about it yet.
- Re-organized SpareParts. For those asking, I have no idea what PLMN and SPN means, I took it from the source variable names. What I do know is they are related to carrier, and you can change them for your carrier colour to change.
- Updated source to CM's latest .
180510:
- Added various options into spare parts to allow configuration of clock, date, and many other colours. A reboot is required for the changes to take effect! SPN and PLMN is for the carrier .
170510 #2:
- Removed the swipe function in browser . It broke the Browser completely. Sorry about the error.
- Browser.apk no longer available as standalone since all it does is increase the max tabs from 8 to 16. It is still in the update.zip .
- Fixed the PIN lock buttons getting cut off if you use both visible dots and custom message. Thanks to _avatar for the help !
170510:
-Made some modifications to Browser.apk, as follows:
- If in fullscreen mode, swipe down on the title/address bar to show notifications/status bar, touch anywhere on the webpage will hide it back.
- Increased max number of tabs from 8 to 16.
- It is included with this mod update.zip because I've made some changes to framework, and I'm not sure how well it will work on the previous CM5.0.6 framework. A standalone link is also available, please report if it works for those on CM5.0.6 or CM5.0.7 WITHOUT the rest of our framework modifications.
160510:
Added option to make the delay on incorrect pattern customizable. (I dislike the delay!)
Changed the correct delay of PIN lock by avatar from 750ms to 0ms. Report if there're problems .
150510 #3:
Made it show 6 apps by default, otherwise it will cause a boot loop unless you've used spare parts first.
150510 #2:
Fixed a visual glitch with the focus/select drawable being cut off for the right-most apps if set to 12 recent apps.
150510:
Test release with configurable number of recent apps. Configure in SpareParts. 9 and 12 is now working but looks wrong (left-aligned). pershoot/bcrook88/myself are working on it. Removed previous version as invisible slider broke too many things. Give pershoot's links a try if you are looking for them since he has not added the invisible slider part. For those who have flashed my previous test release containing Browser.apk, please push Browser.apk from CM5.0.7-test2, or simply reflash CM5.0.7-test2 (or test whatever, if you're on D/S ).
140510:
Updated with invisible slider option . Screens: http://forum.xda-developers.com/showpost.php?p=6475563&postcount=38
Downloads:
Normal (CyanMod Default + Invisible Lockscreen + Custom Msg + Configurable Number of Apps in Spare Parts + Browser):
Download (Nexus One): http://dl.dropbox.com/u/263378/androidstuff/250510_Nexus_CM_Framework_Mod_Update.zip
Download (Dream/Sapphire): http://dl.dropbox.com/u/263378/androidstuff/250510_DreamSapphire_Framework_Mod_Update.zip
Source:
Thanks to everyone who guided me on GitHub, I've used it before but never really utilized its merging and branching power . All source is now available on http://github.com/Wysie. For these mod, you will want to look at frameworks_base, frameworks_policies, spareparts and settings.
Special thanks to:
pershoot - For being a very helpful guy throughout, esp. with his help with the make commands (although he suggested I do a full make ), and for the 15 recent apps layout, from which 9 and 12 was derived from
bcrook88 - Same as above, without the full make
Credits:
david1711 - I think he came up with the invisible lockscreen morph
britoso - I used part of his XML for the custom message
Original Invisible Lockscreen Morph:
http://forum.xda-developers.com/showthread.php?t=654858 (Second Post)
To Do:
Apply changes without rebooting
Have an option in Spare Parts to reset all colours to defaults?
sweet thanks so much!! downloading now
looks like the link is broken....
Re-uploading, try in a minute or so, I based the update.zip off pershoot's 15apps, and forgot to remove one line (not major, but I'm ocd ).
thank you kind sir.....great work!
Thank you! I got tired of people peeking over to see my lockscreen combination lol.
A lot of apps FC after flashing, the notification bar disappeared and I cannot switch off my phone
I previously installed pershoot's OCUV kernel + 15 Recent apps on CM 5.0.7 Test 1
[Request] optional text into the lockscreen
I love it
Request:
would it be possible to implement an option like this in settings:
So everyone can insert a specific text into the lockscreen??
thread
-------------
by the way, invisible lockscreen breaks Trackball Alert (till TA is updated to 507)
gdskp said:
A lot of apps FC after flashing, the notification bar disappeared and I cannot switch off my phone
I previously installed pershoot's OCUV kernel + 15 Recent apps on CM 5.0.7 Test 1
Click to expand...
Click to collapse
same for me!
I would even say all apps produce fc
I'm not using CM at the moment. I switch back and forth between it and my own custom Desire Rom. But this is the first useful lockscreen mod for CM that i have seen so far.. Great work!
rori: Thanks for the suggestion, I'll look into it. By the way, with the britoso mod, what happens if you have the dots on? Or are they permanently gone?
For those of you having FCs, I'll be honest with you, I have zero idea why . Are you all using any morphs? How about flashing CM5.0.7-Test, then my update.zip again? Pershoot's changes will also replace services.jar, although I'm not too sure if it will affect anything. I'm doing a repo sync now and will make a version for test2 asap.
ill roll this in tonight to the 15recent.
good work
Thanks pershoot !
Updated update.zip file in first post for CM5.0.7-test2!
Wysie said:
rori: Thanks for the suggestion, I'll look into it. By the way, with the britoso mod, what happens if you have the dots on? Or are they permanently gone?
For those of you having FCs, I'll be honest with you, I have zero idea why . Are you all using any morphs? How about flashing CM5.0.7-Test, then my update.zip again? Pershoot's changes will also replace services.jar, although I'm not too sure if it will affect anything. I'm doing a repo sync now and will make a version for test2 asap.
Click to expand...
Click to collapse
That xml layout mod is for the slide-lock-screen with the slider below the text. There are ways of showing a view below another, example , Not tried this but it looks feasible.
Any chance you could implement hiding the clock and/or date?
I have a live wallpaper that displays the time. (ping pong)
Hi britoso, thx for the help. Actually I've already added a line of text under, but it doesn't seem to look good. Adding the text directly over doesn't look good either .
15 Recent Apps + Invisible Lockscreen – CM5.0.7-T Series – Nexus
http://droidbasement.com/db-blog/?p=382
Thanks pershoot .
By the way, custom msg is working nicely when lock pattern is disabled. Still working on the one with it enabled .
will this lockscreen also work on G1/MT3G with CM5.0.7-test4?
bluedragon1982: Try this, incluses 15 recent apps: http://droidbasement.com/db-blog/?p=384
Wysie said:
Thanks pershoot .
By the way, custom msg is working nicely when lock pattern is disabled. Still working on the one with it enabled .
Click to expand...
Click to collapse
That´s great news ******
I whish, hope, you succeed for the enabled one !!
Taskbar puts a start menu and recent apps tray on top of your screen that's accessible at any time, increasing your productivity and turning your Android tablet (or phone) into a real multitasking machine!
On devices running Android 7.0+, Taskbar can also launch apps in freeform windows for a PC-like experience! No root required! (see below for instructions)
Taskbar is also fully supported on Chrome OS - use Taskbar as a secondary Android app launcher on your Chromebook!
Features
• Start menu - shows you all applications installed on the device, configurable as a list or as a grid
• Recent apps tray - shows your most recently used apps and lets you easily switch between them
• Collapsible and hideable - show it when you need it, hide it when you don't
• Many different configuration options - customize Taskbar however you want
• Pin favorite apps or block the ones you don't want to see
• Designed with keyboard and mouse in mind
• 100% free, open source, and no ads
Freeform window mode (Android 7.0+)
Taskbar lets you launch apps in freeform floating windows on Android 7.0+ devices. No root access is required, although Android 8.0+ devices require an adb shell command to be run during initial setup.
Simply follow these steps to configure your device for launching apps in freeform mode:
1. Check the box for "Freeform window support" inside the Taskbar app
2. Follow the directions that appear in the pop-up to enable the proper settings on your device (one-time setup)
3. Go to your device's recent apps page and clear all recent apps
4. Start Taskbar, then select an app to launch it in a freeform window
For more information and detailed instructions, click "Help & instructions for freeform mode" inside the Taskbar app.
Download
• Download Taskbar on the Play Store
• Download Taskbar on F-Droid
It's about time I made an xda thread for this :laugh: Feedback is appreciated!
XDA:DevDB Information
Taskbar, App for all devices (see above for details)
Contributors
farmerbb
Source Code: https://github.com/farmerbb/Taskbar/
Version Information
Status: Stable
Current Stable Version: 3.9
Stable Release Date: 2018-03-10
Created 2016-12-12
Last Updated 2018-08-12
Good work bro keep it up. Installed it and enjoying the ride as it's great concept as launcher's & dock is useless now . Issues and suggestions Will be post if any.
Thanks for the app.
Sent from my LG-D858 using Tapatalk
This is an amazing app whose concept can revolutionize the android experience. With KK I used to download Xposed and install XHaloFloatingWindow and Floating notifications just to mimic a PC desktop. Now I can do something similar with this app and Nougat! Thanks, OP!
It would be great if the Taskbar overlay can support the Extended Desktop feature. I use an unofficial build of LineageOS, and when you open an app in a freeform window, the nav bar appears and it doesn't hide. And when you close all windows, the overlay and the nav bar stay, making it impossible to use, for example, gestures in your home screen. I use Nova Launcher, and in order to open the app drawer, I use a double tap gesture. So I have to go to the Taskbar settings, disable it, and then I can access my app drawer as usual. Is it possible for the overlay to automatically close when there are no freeform windows opened?
Also, is there a way to implement a shortcut to toggle off the taskbar without opening the app? Like greenify hibernation, that can be even set with a gesture in nova.
If the overlay and nav bar issues can be fixed, and we can somehow enable a shortcut use the taskbar whenever we want, this is going to be my favorite app from now on ?
Thanks again, OP. I hope this feedback helps!
xXLosstarotXx said:
This is an amazing app whose concept can revolutionize the android experience. With KK I used to download Xposed and install XHaloFloatingWindow and Floating notifications just to mimic a PC desktop. Now I can do something similar with this app and Nougat! Thanks, OP!
It would be great if the Taskbar overlay can support the Extended Desktop feature. I use an unofficial build of LineageOS, and when you open an app in a freeform window, the nav bar appears and it doesn't hide. And when you close all windows, the overlay and the nav bar stay, making it impossible to use, for example, gestures in your home screen. I use Nova Launcher, and in order to open the app drawer, I use a double tap gesture. So I have to go to the Taskbar settings, disable it, and then I can access my app drawer as usual. Is it possible for the overlay to automatically close when there are no freeform windows opened?
Also, is there a way to implement a shortcut to toggle off the taskbar without opening the app? Like greenify hibernation, that can be even set with a gesture in nova.
If the overlay and nav bar issues can be fixed, and we can somehow enable a shortcut use the taskbar whenever we want, this is going to be my favorite app from now on ?
Thanks again, OP. I hope this feedback helps!
Click to expand...
Click to collapse
Thanks for your feedback!
Unfortunately, due to System UI restrictions that Google has put in place for multi-window mode, hiding the status/navigation bars is not possible while apps are running in freeform mode. What you could do, though, is disable the navigation bar entirely (through build.prop) and then use an app such as Simple Control to provide an alternate implementation of the software keys.
Taskbar staying open even after all freeform mode windows have been closed is by design. If it's not set as your default launcher, though, you can still press the home button to collapse Taskbar and exit freeform mode. (You're not the only one that has asked about this, so I might make this an option in a future version )
You can already turn off the Taskbar by either: pressing the "Quit" button in the notification, or by long-pressing the app drawer icon and selecting "Quit". I already have a "Start Taskbar" homescreen shortcut for Android 7.1+ devices - perhaps I should change this to an on/off toggle instead?
farmerbb said:
Unfortunately, due to System UI restrictions that Google has put in place for multi-window mode, hiding the status/navigation bars is not possible while apps are running in freeform mode. What you could do, though, is disable the navigation bar entirely (through build.prop) and then use an app such as Simple Control to provide an alternate implementation of the software keys.
Click to expand...
Click to collapse
Perfect, I'll use a third-party nav bar instead, I forgot it was possible to disable the system one via build.prop.
farmerbb said:
You can already turn off the Taskbar by either: pressing the "Quit" button in the notification, or by long-pressing the app drawer icon and selecting "Quit". I already have a "Start Taskbar" homescreen shortcut for Android 7.1+ devices - perhaps I should change this to an on/off toggle instead?
Click to expand...
Click to collapse
A toggle is a great idea, and if in the future it's possible to add support so it can be set with a Nova gesture or a similar app, we won't need a dock anymore ?
Another thing I saw while checking the app was that when you move any window to one side of the screen it automatically pins like in split mode. Is there a way to avoid this? I'm not completely sure, but through the developer options it was possible to disable this. However, I cannot find it anymore.
---------- Post added at 02:34 AM ---------- Previous post was at 02:31 AM ----------
farmerbb said:
Thanks for your feedback!
Unfortunately, due to System UI restrictions that Google has put in place for multi-window mode, hiding the status/navigation bars is not possible while apps are running in freeform mode. What you could do, though, is disable the navigation bar entirely (through build.prop) and then use an app such as Simple Control to provide an alternate implementation of the software keys.
Taskbar staying open even after all freeform mode windows have been closed is by design. If it's not set as your default launcher, though, you can still press the home button to collapse Taskbar and exit freeform mode. (You're not the only one that has asked about this, so I might make this an option in a future version )
You can already turn off the Taskbar by either: pressing the "Quit" button in the notification, or by long-pressing the app drawer icon and selecting "Quit". I already have a "Start Taskbar" homescreen shortcut for Android 7.1+ devices - perhaps I should change this to an on/off toggle instead?
Click to expand...
Click to collapse
Perfect, I'll use a third-party nav bar instead, I forgot it was possible to disable the system one via build.prop.
A toggle is a great idea, and if in the future it's possible to add support so it can be set with a Nova gesture or a similar app, we won't need a dock anymore ?
Another thing I saw while checking the app was that when you move any window to one side of the screen it automatically pins like in split mode. Is there a way to avoid this? I'm not completely sure, but through the developer options it was possible to disable this. However, I cannot find it anymore.
I was using this wonderful app for awhile as my main launcher. The problem I ran into was Hangouts Dialer wouldn't launch with this app installed. Think it was some issue with drawing on top conflicting.
xXLosstarotXx said:
Another thing I saw while checking the app was that when you move any window to one side of the screen it automatically pins like in split mode. Is there a way to avoid this? I'm not completely sure, but through the developer options it was possible to disable this. However, I cannot find it anymore.
Click to expand...
Click to collapse
No it's not possible to disable that. It's built-in behavior of Android.
Visi0nofExcellence2 said:
I was using this wonderful app for awhile as my main launcher. The problem I ran into was Hangouts Dialer wouldn't launch with this app installed. Think it was some issue with drawing on top conflicting.
Click to expand...
Click to collapse
Hmm, interesting, I use Hangouts Dialer and haven't had any issues using it with Taskbar. I'll investigate this a bit more though.
farmerbb said:
Hmm, interesting, I use Hangouts Dialer and haven't had any issues using it with Taskbar. I'll investigate this a bit more though.
Click to expand...
Click to collapse
I tested the new version and it works with Hangouts Dialer. Issue now is my power button doesn't work with Taskbar as home launcher. If I enter an app it works fine but on the homescreen it doesn't. If my phone falls asleep on homescreen, I can't turn it back on without rebooting.
Visi0nofExcellence2 said:
I tested the new version and it works with Hangouts Dialer. Issue now is my power button doesn't work with Taskbar as home launcher. If I enter an app it works fine but on the homescreen it doesn't. If my phone falls asleep on homescreen, I can't turn it back on without rebooting.
Click to expand...
Click to collapse
The power button issue is a ROM-specific bug that has been reported on OnePlus devices, and also devices running CyanogenMod/Lineage OS. It's an issue with freeform mode itself, unfortunately, and not with Taskbar.
farmerbb said:
The power button issue is a ROM-specific bug that has been reported on OnePlus devices, and also devices running CyanogenMod/Lineage OS. It's an issue with freeform mode itself, unfortunately, and not with Taskbar.
Click to expand...
Click to collapse
I am using a CM based rom. I will turn off freeform.
--Feature request--
Please add an option to disable the start button entirely so it can be used purely as a system wide dock or resents bar only.
Please add icon spacing options so we can centre icons etc when using the "fill white space" option. either manual padding or various presets. also aligning them left/centre/right would be nice also.
Thanks and keep up the great work.
Also, any thoughts to a Kitkat compatible version? We don't need free-form windows, but surely the overlay taskbar would work just fine on kitkat. I ask because Taskbar is extremely useful for tablets, yet most tablets are still running pre-lollipp android versions.
RudeboyXL said:
--Feature request--
Please add an option to disable the start button entirely so it can be used purely as a system wide dock or resents bar only.
Please add icon spacing options so we can centre icons etc when using the "fill white space" option. either manual padding or various presets. also aligning them left/centre/right would be nice also.
Thanks and keep up the great work.
Click to expand...
Click to collapse
RudeboyXL said:
Also, any thoughts to a Kitkat compatible version? We don't need free-form windows, but surely the overlay taskbar would work just fine on kitkat. I ask because Taskbar is extremely useful for tablets, yet most tablets are still running pre-lollipp android versions.
Click to expand...
Click to collapse
Assuming you're talking about the navigation bar icons, yes, more customization options for them is something I plan on adding.
As for compatibility with Android 4.x devices, this is something I have actually investigated adding before. There are a few issues with adding support for 4.x, though, that I would have to work around before I consider supporting those versions:
The app is pretty tightly built around APIs that were only added in 5.0, such as UsageStatsManager and LauncherApps
The app also takes advantage of the Material theme for context menus, and I have not been able to get the context menus to look correct on Android 4.x devices using AppCompat
More testing would be involved on my end if I were to support 4.x devices in addition to 5.0+
farmerbb said:
Assuming you're talking about the navigation bar icons, yes, more customization options for them is something I plan on adding.
As for compatibility with Android 4.x devices, this is something I have actually investigated adding before. There are a few issues with adding support for 4.x, though, that I would have to work around before I consider supporting those versions:
The app is pretty tightly built around APIs that were only added in 5.0, such as UsageStatsManager and LauncherApps
The app also takes advantage of the Material theme for context menus, and I have not been able to get the context menus to look correct on Android 4.x devices using AppCompat
More testing would be involved on my end if I were to support 4.x devices in addition to 5.0+
Click to expand...
Click to collapse
Understood. I'll keep my fingers crossed. It's the one thing I'm missing from my kitkat tablet to make it truly awesome.
Version Information
Status: Stable
Current Stable Version: 2.1.5
Stable Release Date: 2016-12-09
Created 2016-12-12
Last Updated 2016-12-12[/QUOTE]
Fantastic app( but for nougat only...I am talking about freeform). It needs the following two features and it will be unbeatable:
1. Option to open notifications in freeform/floating like hover or halo and
2. All the features working below nougat(at least lollipop)also. Thanks for reading.
Is it possible to trigger the taskbar with on screen navbar? Maybe with tasker and custom navbar app?
Excellent app - restored a better version of windows than were on my Lenovo Yoga Book. If I click on the maximise window button so that it fills the screen, I can't see a way to rewindow the same app?
is there any hope of getting live wallpaper support added to this app?
I would absolutely adore the ability to use this as my Launcher with KLWP.
But I don't know if that is even possible... :/
I know this thread is pretty old now, but not sure where else to put this.
With taskbar installed as a system app, it's possible to have it detect only the running apps (found this out thanks to bliss OS), however, i am unable to get a list of running apps on Android 9 MIUI 10, it just remains blank, is this a bug in the app, or an issue with MIUI (rooted with magisk, app has been manually moved into /system/app)
Hi guys,
I'm building an extra lean LineageOS 14.1 ROM for oneplus3/3T with a few added features. A lot of packages have been stripped down, only the bare minimum is built to provide a fast and stable ROM. That gives you much more freedom as you can install exactly what you really want from the Playstore. You can install most of the missing packages manually, they are available in a flashable zip on the server (see second post).
My approach for DARK ROM 14.1 is to add as many Pixel features as possible while keeping a solid LineageOS base.
Key features
- Full OMS support (rootless)
- Signature spoofing support
- Pixel Launcher (with the provided GAPPS package)
- Pixel animated navbar (with on/off switch)
- Pixel sounds
- Pixel accent colors
- Pixel bootanimation with sound
- Rounded icons
- Google Assistant
- Night Light
- Night Light Brightness
- Choose between dialer and voice assistant in lockscreen
- Hide next alarm from expanded status bar and lockscreen
- Disable the boot animation sound
- Secure lockscreen (disables status bar pull down, quick settings tiles, power button and lockscreen shortcuts)
- Double tap the lock icon on the lockscreen to sleep
- Longpress power button while screen off to trigger flashlight
- Hide bluetooth icon when disconnected
- Volume steps
- Quick unlock pin/password
- Remove album art from lockscreen
- Date in status bar
- Battery bar
- Custom headers
- Smart pulldown
- Volume button controls media volume anywhere
- Change navbar height
- Screenshot tile
- Caffeine tile
- Sync tile
- Reboot/recovery tile
- Music tile
- USB Tethering tile
- NFC tile
- Quick settings custom rows/columns
- Turn on/off mobile data with single click on collapsed quick settings
- Status bar ticker
- Separate ring and notification volume
- Specific color for 100% charged battery
- Prevent accidental wakeup
- Remove settings suggestions
- Show WiFi SSID in status bar
- Show carrier label in status bar
- Hide carrier label when WiFi SSID is showing
- Hide carrier label on the lockscreen (or rename to whatever you want)
- Hide the low battery warning notification
- Remove the orange status bar and navigation bar when in battery saver mode
- One hand mode
- Choose doze brightness
- Adjust animation scale precisely with a slider
- Dynamic nav bar color (changes color to the same of status bar)
- In-call vibration options (on connect, on call waiting and on disconnect)
Screenshots
SafetyNet
The ROM is already designed to pass SafetyNet out of the box. No need to lock the bootloader (which I advise you to do ONLY on a pure factory image install) because the kernel has the patch for it. If you want root, you'll need to install Magisk, which comes pre-rooted. Then, enable Magisk Hide in Magisk Manager, hard reboot and you should be good to go. Also, do not enable busybox in Magisk Manager, that will cause you to randomly lose root. You'll get all you need to know on the Magisk thread.
ViPER4Android/ViPER4Arise
The ROM is designed to work with both ViPER4Android and ViPER4Arise out of the box without the need for SuperSU or any Magisk module. The SEPolicy already contains the necessary permissions for them to work even in Enforcing. All you need to do is flash the package of your choice.
Installation
Please refer to the official LineageOS thread for recovery or other device specific images.
If coming from any other ROM
- Backup first... always backup first
- Wipe system, data, cache and dalvik cache
- Install DARK ROM
- Install provided GAPPS (mandatory)
- Install root package of your choice (I recommend Magisk)
Enjoy !
If coming from a previous build of mine
- Backup (you know it)
- Dirty flash DARK ROM
- Install root package of your choice
Enjoy! (if anything goes wrong, clean flash)
Download
To download the whole ROM
Oneplus3/3T
To download GAPPS and Extras
Extras
To download delta updates
Go to Settings/About phone/System updates and use the OpenDelta app to automatically download delta updates.
Delta Updates
Here are a few explanations on how to use delta updates. First, you will need to keep the first full build you downloaded on your sdcard (any full build that have NIGHTLY in the filename will do). I recommend that you keep it on the root of your sdcard until you flash a new build with the OpenDelta app. After that, the OpenDelta app will automatically place a new flashable zip inside the OpenDelta folder that will be used for the next delta updates. At that point you can delete the build on the root of your sdcard, but you will need to keep the (latest) file in the OpenDelta folder at all times to keep the delta updates working.
You will also notice a folder named FlashAfterUpdate in the OpenDelta folder. As its name suggests, any flashable zip files that you put in this folder will be flashed automatically after the update. I recommend that you put all your extra flashable zips there, cause if you use the app to auto-flash the latest build, it will reboot automatically after updating, which means you won't have the opportunity to manually flash other zips. If you want root to survive, you need to put your root package there.
Translations
If you want to help translate the ROM in your language, here are my Crowdin projects. Let me know if you want me to add another language.
SystemUI
Settings
CMParts
Donations
Please consider a donation if you like my work ! I spend a lot of time and effort working on this, so if you can spare a few bucks, please buy me a beer (so I can relax when I'm stuck on a stubborn bug) or a coffee (so I can work on it later in the night). If you decide to do so, I'll gladly add you to the Donation Hall of Fame (see second post)
Source code
GitHub
Thanks and credit
LineageOS
All the good devs who contributed to the features I added
Donation Hall of Fame
- alsheron X2 !!!
- cryu1
- OldoTRONic X2 !!!
- Cissmayazz
- twili9ht
- krombopulos X2 !!!
- squandry
- zerand
- strangethings
- jerunk
- hurricurry
- Sui77
- mistersixt
- gillboyzz
- vurey
- jstargz
- the_house
- WSeb
- hawgguy
- spibbs
- ProBird79
- focus-pocus
- CyberpodS2 X2 !!!
- herbie13 X2 !!!
- atharwaqas
- BoozYooNit X2 !!!
- NJD316
- velvel
- ChrisPadduDubbu X2 !!!
- mrtsunami92
- caballon
- deafbum
Many thanks to those generous donors !!! They make DARK ROM possible.
Extra Packages
On the server you will find a file named ExtraPackages_date.zip which contains a few apps that are not available out of the box in my builds (see list). You won't have to flash it every update, since there is a survival script. I suggest you open the zip and remove the files you don't need before flashing it the first time.
Here is what's included:
- Calendar (AOSP Calendar)
- Contacts (AOSP Contacts)
- DeskClock (AOSP Clock)
- Dialer (AOSP Dialer)
- Eleven (LOS Music player)
- ExactCalculator (LOS Calculator)
- Gallery2 (AOSP Photos)
- Jelly (LOS Browser)
- LatinIME (AOSP Keyboard)
- Messaging (AOSP SMS)
- Recorder (LOS Recorder)
- Snap (LOS Camera)
- Stk (AOSP SIM card toolkit)
- Trebuchet (LOS Launcher)
Note that if you install my GAPPS and the complete Extra packages, you'll end up with two Phone app and two Contacts apps. Simply delete the GoogleContacts and GoogleDialer in the system/priv-app and reboot. If you choose to use the AOSP Dialer instead of Google Dialer, you'll need to go to Settings/Apps/Gear Icon (top right) and choose the AOSP Dialer as default phone app, otherwise you won't be able to make calls.
Thanks! I will try
I've ran your ROM on my Nexus 6P, was awesome! Best rom for the 6P I'm sure it will fair very well here as well! As for now tho I'm leaving my 3T in touched but interested to see what others think of your ROM.
Was this just ported from the 6P then??
Alex1188 said:
I've ran your ROM on my Nexus 6P, was awesome! Best rom for the 6P I'm sure it will fair very well here as well! As for now tho I'm leaving my 3T in touched but interested to see what others think of your ROM.
Was this just ported from the 6P then??
Click to expand...
Click to collapse
Yes, it's the exact same ROM as the 6P
Looks Nice.. will try
Hey! Your ROM was the daily driver on my Nexus 5 till a few months back! I used the CAF version and that rocked. Hope to see the same stability and battery life increases here too! All the best @Dark_Eyes_!
Looks promising! ?
Nice to see you here mate.!!
Just flashed this ROM, seriously this thing is stable as f***!
@Dark_Eyes_ the only bug I found is the inability to enable the on-screen navigation bar. The toggles itself works and the hardware keys gets disabled, but the navigation bar never comes up. Nothing is recorded in the logcat that would be useful to debug this problem.
HAL1 or HAL3 ? in this ROM
Want to know if i'll be able to use google camera or the Nexus CameraNX mod in this ROM.
Is it only me facing network drop issues and heating even with light usage and one last thing camera takes way more time for focusing
really loving rom so far but no nav bar it shows up
Going to give this a go. Looks awesome. Good work.
Plz make for oneplus 3
Cybertron™ said:
Plz make for oneplus 3
Click to expand...
Click to collapse
It is for OP3 as for OP3T...it's in cross development section
Amazing
kentexcitebot said:
Just flashed this ROM, seriously this thing is stable as f***!
@Dark_Eyes_ the only bug I found is the inability to enable the on-screen navigation bar. The toggles itself works and the hardware keys gets disabled, but the navigation bar never comes up. Nothing is recorded in the logcat that would be useful to debug this problem.
Click to expand...
Click to collapse
I knew about the nav bar, but I was hoping that a logcat would tell me where to start looking. OP3 is the only device I support that have hardware keys. Is it working fine in the official LineageOS builds?
subashchandran said:
HAL1 or HAL3 ? in this ROM
Want to know if i'll be able to use google camera or the Nexus CameraNX mod in this ROM.
Click to expand...
Click to collapse
As of now Google camera doesn't work, but I saw that LineageOS have some commits pending to enable HAL3. I won't be fooling around on this, since I don't own the device, and I'll merge whatever LineageOS merges.
Bootanimation is not in pixel, still looks like in cyanogenmod
New build is up!
Guys,
I just released a new build with a few fixes. On-screen navbar should be fixed and the bootanimation should be pixel now. I also merged all the latest updates from LineageOS. Delta updates should be up, please report how it goes.
Hope everything is fine now! Please give feedback
Enjoy!
Hi guys,
I'm building an extra lean LineageOS 14.1 ROM for bullhead with a few added features. A lot of packages have been stripped down, only the bare minimum is built to provide a fast and stable ROM. That gives you much more freedom as you can install exactly what you really want from the Playstore. You can install most of the missing packages manually, they are available in a flashable zip on the server (see second post).
My approach for DARK ROM 14.1 is to add as many Pixel features as possible while keeping a solid LineageOS base.
Key features
- Full OMS support (rootless)
- Signature spoofing support
- Pixel Launcher (with the provided GAPPS package)
- Pixel animated navbar (with on/off switch)
- Pixel sounds
- Pixel accent colors
- Pixel bootanimation with sound
- Rounded icons
- Google Assistant
- Night Light
- Night Light Brightness
- Choose between dialer and voice assistant in lockscreen
- Hide next alarm from expanded status bar and lockscreen
- Disable the boot animation sound
- Secure lockscreen (disables status bar pull down, quick settings tiles, power button and lockscreen shortcuts)
- Double tap the lock icon on the lockscreen to sleep
- Longpress power button while screen off to trigger flashlight
- Hide bluetooth icon when disconnected
- Volume steps
- Quick unlock pin/password
- Remove album art from lockscreen
- Date in status bar
- Battery bar
- Custom headers
- Smart pulldown
- Volume button controls media volume anywhere
- Change navbar height
- Screenshot tile
- Caffeine tile
- Sync tile
- Reboot/recovery tile
- Music tile
- USB Tethering tile
- NFC tile
- Quick settings custom rows/columns
- Turn on/off mobile data with single click on collapsed quick settings
- Status bar ticker
- Separate ring and notification volume
- Specific color for 100% charged battery
- Prevent accidental wakeup
- Remove settings suggestions
- Show WiFi SSID in status bar
- Show carrier label in status bar
- Hide carrier label when WiFi SSID is showing
- Hide carrier label on the lockscreen (or rename to whatever you want)
- Hide the low battery warning notification
- Remove the orange status bar and navigation bar when in battery saver mode
- One hand mode
- Choose doze brightness
- Adjust animation scale precisely with a slider
- Dynamic nav bar color (changes color to the same of status bar)
- In-call vibration options (on connect, on call waiting and on disconnect)
Screenshots
SafetyNet
The ROM is already designed to pass SafetyNet out of the box. No need to lock the bootloader (which I advise you to do ONLY on a pure factory image install) because the kernel has the patch for it. If you want root, you'll need to install Magisk, which comes pre-rooted. Then, enable Magisk Hide in Magisk Manager, hard reboot and you should be good to go. Also, do not enable busybox in Magisk Manager, that will cause you to randomly lose root. You'll get all you need to know on the Magisk thread.
ViPER4Android/ViPER4Arise
The ROM is designed to work with both ViPER4Android and ViPER4Arise out of the box without the need for SuperSU or any Magisk module. The SEPolicy already contains the necessary permissions for them to work even in Enforcing. All you need to do is flash the package of your choice.
Installation
Please refer to the official LineageOS thread for recovery or other device specific images (radio, bootloader, vendor).
If coming from any other ROM
- Backup first... always backup first
- Wipe system, data, cache and dalvik cache
- Install DARK ROM
- Install provided GAPPS (mandatory)
- Install root package of your choice (I recommend Magisk)
Enjoy !
If coming from a previous build of mine
- Backup (you know it)
- Dirty flash DARK ROM
- Install root package of your choice
Enjoy! (if anything goes wrong, clean flash)
Download
To download the whole ROM
Bullhead
To download GAPPS and Extras
Extras
To download delta updates
Go to Settings/About phone/System updates and use the OpenDelta app to automatically download delta updates.
Delta Updates
Here are a few explanations on how to use delta updates. First, you will need to keep the first full build you downloaded on your sdcard (any full build that have NIGHTLY in the filename will do). I recommend that you keep it on the root of your sdcard until you flash a new build with the OpenDelta app. After that, the OpenDelta app will automatically place a new flashable zip inside the OpenDelta folder that will be used for the next delta updates. At that point you can delete the build on the root of your sdcard, but you will need to keep the (latest) file in the OpenDelta folder at all times to keep the delta updates working.
You will also notice a folder named FlashAfterUpdate in the OpenDelta folder. As its name suggests, any flashable zip files that you put in this folder will be flashed automatically after the update. I recommend that you put all your extra flashable zips there, cause if you use the app to auto-flash the latest build, it will reboot automatically after updating, which means you won't have the opportunity to manually flash other zips. If you want root to survive, you need to put your root package there.
Translations
If you want to help translate the ROM in your language, here are my Crowdin projects. Let me know if you want me to add another language.
SystemUI
Settings
CMParts
Donations
Please consider a donation if you like my work ! I spend a lot of time and effort working on this, so if you can spare a few bucks, please buy me a beer (so I can relax when I'm stuck on a stubborn bug) or a coffee (so I can work on it later in the night). If you decide to do so, I'll gladly add you to the Donation Hall of Fame (see second post)
Source code
GitHub
Thanks and credit
LineageOS
All the good devs who contributed to the features I added
Donation Hall of Fame
- alsheron X2 !!!
- cryu1
- OldoTRONic X2 !!!
- Cissmayazz
- twili9ht
- krombopulos X2 !!!
- squandry
- zerand
- strangethings
- jerunk
- hurricurry
- Sui77
- mistersixt
- gillboyzz
- vurey
- jstargz
- the_house
- WSeb
- hawgguy
- spibbs
- ProBird79
- focus-pocus
- CyberpodS2 X2 !!!
- herbie13 X2 !!!
- atharwaqas
- BoozYooNit X2 !!!
- NJD316
- velvel
- ChrisPadduDubbu X2 !!!
- mrtsunami92
- caballon
- deafbum
Many thanks to those generous donors !!! They make DARK ROM possible.
Extra Packages
On the server you will find a file named ExtraPackages_date.zip which contains a few apps that are not available out of the box in my builds (see list). You won't have to flash it every update, since there is a survival script. I suggest you open the zip and remove the files you don't need before flashing it the first time.
Here is what's included:
- Calendar (AOSP Calendar)
- Contacts (AOSP Contacts)
- DeskClock (AOSP Clock)
- Dialer (AOSP Dialer)
- Eleven (LOS Music player)
- ExactCalculator (LOS Calculator)
- Gallery2 (AOSP Photos)
- Jelly (LOS Browser)
- LatinIME (AOSP Keyboard)
- Messaging (AOSP SMS)
- Recorder (LOS Recorder)
- Snap (LOS Camera)
- Stk (AOSP SIM card toolkit)
- Trebuchet (LOS Launcher)
Note that if you install my GAPPS and the complete Extra packages, you'll end up with two Phone app and two Contacts apps. Simply delete the GoogleContacts and GoogleDialer in the system/priv-app and reboot. If you choose to use the AOSP Dialer instead of Google Dialer, you'll need to go to Settings/Apps/Gear Icon (top right) and choose the AOSP Dialer as default phone app, otherwise you won't be able to make calls.
Downloading now, looking forward to trying this rom out. Lots of awesome features up there!
Ok, first ROM in a while thst I would like to try. The feature list looks very well designed and thought about. Thank You
Thx for the new rom
Thanks Dark_Eyes_ I've been missing this ROM since upgrading from Nexus 5 to 5x. It's working well so far. Awesome work ?
Woooow thanks ....??
Sent from my Nexus 5X using XDA-Developers Legacy app
Hi, when using settings-display-color calibration I get a 'lineage os system error ' . No other issues found so far. Anyone else get this? Cheers.
EDIT: Im set to English UK btw.
herbie13 said:
Hi, when using settings-display-color calibration I get a 'lineage os system error ' . No other issues found so far. Anyone else get this? Cheers.
EDIT: Im set to English UK btw.
Click to expand...
Click to collapse
Thanks for reporting. I already found the solution, it will be fixed in the next update. For the time being simply switch to English (US), edit the color calibration and switch back to your desired language. Cheers!
Hi Dark_Eyes_ I'm really finding the new 7.1.2 feature allowing a swipe down on the fingerprint sensor when unlocked to access pulldown notifications really useful. I see that there are a few apps out there that can enhance its use but all seem to have their probs . Is this something you can play with ? I can think of all sorts of uses but a first would be a tap of the fingerprint sensor to switch off screen when on. Cheers
herbie13 said:
Hi Dark_Eyes_ I'm really finding the new 7.1.2 feature allowing a swipe down on the fingerprint sensor when unlocked to access pulldown notifications really useful. I see that there are a few apps out there that can enhance its use but all seem to have their probs . Is this something you can play with ? I can think of all sorts of uses but a first would be a tap of the fingerprint sensor to switch off screen when on. Cheers
Click to expand...
Click to collapse
There's an app for that
Sent from my Nexus 5X using Tapatalk
herbie13 said:
Hi Dark_Eyes_ I'm really finding the new 7.1.2 feature allowing a swipe down on the fingerprint sensor when unlocked to access pulldown notifications really useful. I see that there are a few apps out there that can enhance its use but all seem to have their probs . Is this something you can play with ? I can think of all sorts of uses but a first would be a tap of the fingerprint sensor to switch off screen when on. Cheers
Click to expand...
Click to collapse
Also maybe to keep screen on while finger on sensor.
Sent from my Bullhead using Tapatalk
iamterence said:
There's an app for that
Click to expand...
Click to collapse
Hi, I have tried a few with not much success. Can you recommend a good one that works well on the 5x ? Thanks
This ROM is awesome! Android Pay works, which is awesome, because I struggled getting Magisk to work on stock rom. I've been staying away from ROMs for a while now, but when I saw your feature list, I couldn't help but try. Really glad I did!
Thanks for the rom...!!
Sent from my Nexus 5X using XDA-Developers Legacy app
@Dark_Eyes_ glad to see you in Bullhead branch. I was so much enjoying Bliss roms until my Hammerhead's wifi chip decided to fail only 2 weeks after warranty expired. The cost of replacement of whole logic board was the same as buying the new 5X at that time 2 years on market already.
Sent from my Bullhead using Tapatalk
Flashed it yesterday and haven't had any issue. Thanks for the ROM. Hope you keep up the good work.
Im on the PixelROM for some quite time. It was so far the easiest hassle free choice for me with so little free time. Installer all in one all together with bootloders and radios all up to date. Bliss was kind of very slow with development lately for this device. I would like to try this ROM cuz I had good memories of @Dark_Eyes_
A few questions though...
1. Compatible with cf SuperSu?
2. How about Open Aroma GApps?
3. What about other custom kernels according to SafetyNet?
Thanks for this ROM
jugoslavpetrovic said:
Im on the PixelROM for some quite time. It was so far the easiest hassle free choice for me with so little free time. Installer all in one all together with bootloders and radios all up to date. Bliss was kind of very slow with development lately for this device. I would like to try this ROM cuz I had good memories of @Dark_Eyes_
A few questions though...
1. Compatible with cf SuperSu?
2. How about Open Aroma GApps?
3. What about other custom kernels according to SafetyNet?
Thanks for this ROM
Click to expand...
Click to collapse
1. Yes, but it might not pass SafetyNet
2. Yes, but you'll need to install at least Google dialer, Google keyboard and pixel launcher.
3. Other kernels might or might not pass SafetyNet. It's most likely up to them, but usually using Magisk will make them work. You might need the beta v13 though.
Dark_Eyes_ said:
1. Yes, but it might not pass SafetyNet
2. Yes, but you'll need to install at least Google dialer, Google keyboard and pixel launcher.
3. Other kernels might or might not pass SafetyNet. It's most likely up to them, but usually using Magisk will make them work. You might need the beta v13 though.
Click to expand...
Click to collapse
Thanks.
SafetyNet is not my priority, never ever played pokemon go or was paying via NFC since Android Pay is not yet supported in my country, I look more to stability and better (less) battety drain, but thanks for clearifying.
This theme is a very simple customization of "OxygenOS Always On Display" but i think many of you will like it
THIS THEME WILL NOT ENABLE AOD (ALWAYS ON DISPLAY)
Features
- Colorize or hide the Ten Digit/Digit/Percentage with Digit Customizer
- Colorize or hide the Date/Owner Text with Text Customizer
- Colorize or hide the Battery with Battery Customizer
-- Set some transparency to make the AOD more "ambient"
- Modify the LiftUp Time, Notification Time and hide the Analog Clock Background with Modifier
Pro/Con
+ This doesn't harm the Notification Popup, it's still at max brightness
- The notification icons are not customizable atm. If someone knows how i'd be happy to hear
Howto
You have to install Substratum first to apply the theme and reboot after applying any change
Compatibility
Compatible with any OnePlus Device running 8.1 and 9.0
Feedback
Feel free to contact me with improvements or bugs in this thread or via pm
Thanks
@isetnt for testing and optimizing
Donation
Buy me a Beer Cheers!
Mirrors
OP-AOD-Digit-Customizer-v3
OP-AOD-Text-Customizer-v3
OP-AOD-Battery-Customizer-v1
OP-AOD-Modifier-v1
Release Date: 2018-08-17
Last Updated: 2018-11-26
Changelogs
Digit Customizer
Code:
v3
- New Colors (Blue4, BlueGrey, Lime, Turquoise, Orange2, Orange3)
- Ability to hide the Percentage
v2
- Split into two Themes: Digits and Text (due to limitations of substratum)
- New Colors
- Ability to hide the date
- 75% is now called 25% to improve the sorting/overview but it's the same value
Text Customizer
Code:
v3
- New Colors (Blue4, BlueGrey, Lime, Turquoise, Orange2, Orange3)
- Ability to hide the Date and Owner Text
Battery Customizer
Code:
v1
- All Colors from Digit and Text Customizer available
-- Special One with 3 Charging-Steps (15%,25% and above 25%) in Red, Yellow and Green
- Ability to hide the Battery
Modifier
Code:
v1
- Change how long a notification is shown
- Change how long the ambient display is shown after the liftup gesture (only makes sense for the ambient display)
- Hide the analog clock background image
Instructions
To explanation: AOD is a background process and enabled substratum themes only apply when the process starts "fresh".
So if it doesn't apply for you, be sure to follow these steps
- Select your colors (the OPAod title becomes pink)
- Reboot your Device
- Go to theme manager (the OPAod title is yellow)
- Enable it (the OPAod becomes green)
- Reboot or force close the aod process
- Done
Thanks for your efforts and work of bringing a theme to customize Ambient display/AOD.
Udzi said:
This theme is a very simple customization of "OxygenOS Always On Display" but i think many of you will like it
Features
- Colorize the Ten Digit/Digit with different colors
- Set some transparency to make the clock more "ambient"
Pro/Con
+ This doesn't harm the Notification Popup, it's still at max brightness
- The battery icon and notification icons are not customizable atm. If someone knows how i'd be happy to hear
- Due to limitations of substratum i had to focus on digits and then "the rest". If you'd like to set different color for battery percentage, owner info etc. i have to create more themes or predifined templates ... let's see how you feel about the first release
Howto
You have to install Substratum first to apply the theme and reboot after applying any change
Compatibility
My Device is a 5T but it should be compatible with any OnePlus Device running 8.1
Question
Is there a need for colorizing the analog clock? If yes, it will be another Theme too...uh....
Feel free to contact me with improvements or bugs in this thread or via pm
Thanks
@isetnt for testing
Version Information
Status: Initial Release
Release Date: 2018-08-17
Last Updated: 2018-08-17
Click to expand...
Click to collapse
That looks really nice ?
Have you noticed significant battery drain? Other AODs usually drain about 3-5% per hour.
Thanks for sharing!
Works great on my OP5T. Great Job.
I'd love to be able to color the other elements like date/batt/slogan.
Works fine on op5t OB13. Would love to see default bright red option for other time digits too
how to enable it
RaktimDey said:
how to enable it
Click to expand...
Click to collapse
After you've installed it in substratum you will have to reboot then go into manager search for aod and this theme will show up as not enabled enable it and you're good to go.
---------- Post added at 09:49 AM ---------- Previous post was at 09:49 AM ----------
fadyfareed said:
Works great on my OP5T. Great Job.
I'd love to be able to color the other elements like date/batt/slogan.
Click to expand...
Click to collapse
We are currently working on that.
It doesn't work for me I'm running on open beta 14 and I have my device rooted with aod magisk module..I tried to apply the theme and enable it after reboot...nothing happens after then!
Same here with ob13, aod or lift up same thing, nothing changes whatever I choose
Working brilliant with Open beta 14 and no limits 3.1.
Varun82786 said:
It doesn't work for me I'm running on open beta 14 and I have my device rooted with aod magisk module..I tried to apply the theme and enable it after reboot...nothing happens after then!
Click to expand...
Click to collapse
leo06 said:
Same here with ob13, aod or lift up same thing, nothing changes whatever I choose
Click to expand...
Click to collapse
- First reboot.
- Then go into the manager tab in substratum.
- Search for aod select it and press on the layer icon.
- Click change overlay state or enable.
If it still doesn't work.
- Restart systemUI or reboot.
First, thank you guys for your Feedback, i'm glad you like it
To explanation: AOD is a background process and enabled substratum themes only apply when the process starts "fresh".
So if it doesn't apply for you, be sure to follow these steps
- Select your colors (the OPAod title becomes pink)
- Reboot your Device
- Go to theme manager (the OPAod title is yellow)
- Enable it (the OPAod becomes green)
- Reboot or force close the aod process
- Done
It is definetly working as you can read from other posts on different versions: OB13, OB14, with AOD Magisk Module, inactivity screen etc.
FYI: I'm going to release some new colors and maybe some additions soon
isetnt said:
Have you tried rebooting then go into the manager tab of substratum search for aod and selecting the installed layer. After its selected press layer icon and press enable. Then if it says enabled and still doesn't work restart system UI or reboot.
Click to expand...
Click to collapse
Another reboot after I select it in manager did the trick, now is working
Thanks Dev it did work for me...
Keep up the good work..
Thanks for the guidance and step by step instructions
It really helped me...
link not working
Vibhor_redmi said:
link not working
Click to expand...
Click to collapse
It works. Maybe you have a Proxy or something?
Udzi said:
It works. Maybe you have a Proxy or something?
Click to expand...
Click to collapse
Did you plan to add more customizations ?
make the brightness 30% if u can
AtZ SpeKtruM said:
Did you plan to add more customizations ?
Click to expand...
Click to collapse
Yes. We are planning to add support for more parts of the aod.