Originally, this was thread was centered on the LineageOS 17 GSI by AndyYan, however, CodeF86 has so very generously made a working GSI for the Moto G6 which you can try out now!
Unlike AndyYan's generic GSI, for this you do NOT need to flash johnaltg1's LineageOS 16 image (if you do, this GSI will NOT boot). It is recommended you use stock Pie firmware. Oreo firmware has not been tested and may result in bugs.
Download here—Compiled Feb 22nd, w/ working LTE!
See CodyF86's thread post
Some notes:
Unlike the generic GSI, calling works.
Also unlike the GSI, the colors don't invert randomly.
Magisk DOES NOT work at the moment, neither phhuson's nor regular Magisk. Flashing it will cause a bootloop.
Bluetooth audio has been reported to not work
As with many Android 10 GSIs/ROMs, Chrome freezes or crashes because GApps packages currently are missing the new Trichrome WebView implementation which replaces Chrome as the default WebView. This being worked on (see OpenGApps wiki and issue #773 on their GitHub.) For now, use another browser (like LineageOS's default browser) if you install GApps. —As soon as Trichrome is added onto the ARM package just as it has for ARM64, Chrome should be stable.
For now, that's all I can think of. However, if you notice any other bugs or caveats, let me know so I can add it to the list.
This is a GSI based on phhuson's prereleased GSI work and also based on the prereleased LineageOS 17. This is a pre-release so please be careful and don't use this as a daily driver. Things may break randomly, whoops, so please be patient! If you see any bugs, report them here.
Extremely huge shoutout to CodyF86 for this GSI!
The developer of this ROM has moved on to another phone and the community now has a full fledged 64-bit ROM which has much better support for things.
AgentICS said:
The LineageOS 17 GSI works great on the Moto G6. There are some caveats however for anyone willing to try it:
You MUST first flash the LineageOS 16.0 ROM first or else you will bootloop.
Use this Magisk from phhuson's official GitHub
Your screen may change colors and look weird, when this happens, go to Settings > Display > LiveDisplay> Color mode and change it to the value under the value selected on the menu and then back to the original one and that should fix it
If you flash GApps before first boot, follow AndyYan's suggestions as the Setup Wizard is broken for some reason on most GApps packages.
Calling while not on WiFi is broken for now.
For now, that's all I can think of. However, if you notice any other bugs or caveats, let me know so I can add it to the list.
This is a GSI based on phhuson's prereleased GSI work and also based on the prereleased LineageOS 17. Things may break randomly, whoops, so please be patient!
Click to expand...
Click to collapse
Just to reiterate, you are stipulating that this pre-release build doesn't permit me to make an outgoing phone call (nor possibly receive any) unless connected to a WiFi network? Please pardon my not-so-subtle-sarcasm ... but, why would anyone release this with a bug (or limitation) which inhibits the core functionality of the device? I could see a million other issues being permissible but not being able to make normal phone calls (or possibly even receive them) doesn't warrant any kind of release for testing. That being said, I'd be happy to help if possible and eagerly await a usable version of Android 10 to put on my Moto G6 which I only got a month ago (happily unlocked at a great price on Amazon). However, it is (currently) my main phone for making calls.
xda4joe said:
Just to reiterate, you are stipulating that this pre-release build doesn't permit me to make an outgoing phone call (nor possibly receive any) unless connected to a WiFi network? Please pardon my not-so-subtle-sarcasm ... but, why would anyone release this with a bug (or limitation) which inhibits the core functionality of the device? I could see a million other issues being permissible but not being able to make normal phone calls (or possibly even receive them) doesn't warrant any kind of release for testing. That being said, I'd be happy to help if possible and eagerly await a usable version of Android 10 to put on my Moto G6 which I only got a month ago (happily unlocked at a great price on Amazon). However, it is (currently) my main phone for making calls.
Click to expand...
Click to collapse
everything works for me
taiyofurukawa said:
everything works for me
Click to expand...
Click to collapse
so you can make phone calls without WIFI conection?
xavcasgar said:
so you can make phone calls without WIFI conection?
Click to expand...
Click to collapse
yesssss
xda4joe said:
Just to reiterate, you are stipulating that this pre-release build doesn't permit me to make an outgoing phone call (nor possibly receive any) unless connected to a WiFi network? Please pardon my not-so-subtle-sarcasm ... but, why would anyone release this with a bug (or limitation) which inhibits the core functionality of the device? I could see a million other issues being permissible but not being able to make normal phone calls (or possibly even receive them) doesn't warrant any kind of release for testing. That being said, I'd be happy to help if possible and eagerly await a usable version of Android 10 to put on my Moto G6 which I only got a month ago (happily unlocked at a great price on Amazon). However, it is (currently) my main phone for making calls.
Click to expand...
Click to collapse
It is pre-release so not all the bugs are ironed out, I should have added that this should not be used on your daily driver. But yes, it's dumb to use a phone that can't make calls without WiFi. Just as a note, you can make and receive calls however if you're not using WiFi, the caller can't hear you. I have filed a bug upstream with phhusson as this affects every GSI built using his work (Pixel Experience, Lineage and AOSP which I've tested). I hope this gets fixed soon so stay tuned to that GitHub issue
taiyofurukawa said:
everything works for me
Click to expand...
Click to collapse
xavcasgar said:
so you can make phone calls without WIFI conection?
Click to expand...
Click to collapse
taiyofurukawa said:
yesssss
Click to expand...
Click to collapse
How? What is your modem version/phone model?
Can't Boot
AgentICS said:
The LineageOS 17 GSI works great on the Moto G6. There are some caveats however for anyone willing to try it:
You MUST first flash the LineageOS 16.0 ROM first or else you will bootloop.
Use this Magisk from phhuson's official GitHub
Your screen may change colors and look weird, when this happens, go to Settings > Display > LiveDisplay> Color mode and change it to the value under the value selected on the menu and then back to the original one and that should fix it
If you flash GApps before first boot, follow AndyYan's suggestions as the Setup Wizard is broken for some reason on most GApps packages.
Calling while not on WiFi is broken for now.
Bluetooth is horribly broken for now, it causes the app playing audio to lag and crash so please stay away from it.
Chrome is wonky at the moment. It'll work and then all of a sudden cause the whole OS to lag and crash or become unresponsive. This is possibly an upstream GApps issue.
For now, that's all I can think of. However, if you notice any other bugs or caveats, let me know so I can add it to the list.
This is a GSI based on phhuson's prereleased GSI work and also based on the prereleased LineageOS 17. This is a pre-release so please be careful and don't use this as a daily driver. Things may break randomly, whoops, so please be patient!
I am documenting everything on here. Stay tuned to that page for more info and further updates. Addiotionally, I have filed a bug report regarding calling, please add on to that GitHub issue and bump it so it can get resolved.
Click to expand...
Click to collapse
Ok, so I installed and flashed Lineage 16 first. Then I flashed Lineage 17 GSI in system img, but then when I did that I go into twrp and it said an os was not installed and wouldn't boot. But if I just flash Lineage 16 it would boot. Am I doing something wrong?
SomeAndrodGuyWithInternet said:
Ok, so I installed and flashed Lineage 16 first. Then I flashed Lineage 17 GSI in system img, but then when I did that I go into twrp and it said an os was not installed and wouldn't boot. But if I just flash Lineage 16 it would boot. Am I doing something wrong?
Click to expand...
Click to collapse
First off, are you unzipping the file? The standalone uncompressed file is unflashable. It needs to be decompressed from it's .gz (or whatever it was compressed to) form. If you have, have you tried using fastboot flash system <lineage file name> from a PC?
AgentICS said:
It is pre-release so not all the bugs are ironed out, I should have added that this should not be used on your daily driver. But yes, it's dumb to use a phone that can't make calls without WiFi. Just as a note, you can make and receive calls however if you're not using WiFi, the caller can't hear you. I have filed a bug upstream with phhusson as this affects every GSI built using his work (Pixel Experience, Lineage and AOSP which I've tested). I hope this gets fixed soon so stay tuned to that GitHub issue
Click to expand...
Click to collapse
Just wanted to jump in here and say I'm seeing same bug on xt1925-6 with callers not able to hear me on any 10 gsi's and speakerphone does not work at all. Phh aosp 10 build 209 with stock pie 55-37-7-2 boot vendor boots fine, other gsi's will only boot using the Ali lineage full ROM boot- vendor but call audio is broken as well. Thanks for submitting the bug report, hopefully it will get fixed in future builds.
Hello friends,
It's been a while since i've posted on XDA. I was the person who originally rooted the g6 play. I managed to build a GSI image of 17.1 with the latest code as of today if anyone is interested I can upload it to gdrive or something, didn't feel like making a new thread.
It boots, mobile calls work, dark mode works (which is amazing), it all seems to work.
Getting it to compile was just short of a miracle...lol.
Only bad thing is I cannot get it to boot with any version of magisk even the version specifically for phh / Android 10, but with just the stock kernel with the ,verify removed it boots fine.
CodyF86 said:
Hello friends,
It's been a while since i've posted on XDA. I was the person who originally rooted the g6 play. I managed to build a GSI image of 17.1 with the latest code as of today if anyone is interested I can upload it to gdrive or something, didn't feel like making a new thread.
It boots, mobile calls work, dark mode works (which is amazing), it all seems to work.
Getting it to compile was just short of a miracle...lol.
Only bad thing is I cannot get it to boot with any version of magisk even the version specifically for phh / Android 10, but with just the stock kernel with the ,verify removed it boots fine.
Click to expand...
Click to collapse
That's amazing! Could you upload it please so I can test it?
Thank you!
AgentICS said:
That's amazing! Could you upload it please so I can test it?
Thank you!
Click to expand...
Click to collapse
GSI-Lineage-17.1-2-16-2020-system.img
It seems it only connects at 3g although it lists a different apn server on lineage, I may be able to fix that, and I couldnt get the sd card to format as anything but adaptive storage, but everything works more or less. going to recompile in a week its still pretty early in development stage of lineage.
CodyF86 said:
GSI-Lineage-17.1-2-16-2020-system.img
It seems it only connects at 3g although it lists a different apn server on lineage, I may be able to fix that, and I couldnt get the sd card to format as anything but adaptive storage, but everything works more or less. going to recompile in a week its still pretty early in development stage of lineage.
Click to expand...
Click to collapse
Huge thanks for this GSI!!! I've been using it and it works flawlessly, I have also observed that only 3G works for now but regardless of that, everything works fine.
Again, I can't reiterate enough how thankful I am with you for this GSI!
AgentICS said:
Huge thanks for this GSI!!! I've been using it and it works flawlessly, I have also observed that only 3G works for now but regardless of that, everything works fine.
Again, I can't reiterate enough how thankful I am with you for this GSI!
Click to expand...
Click to collapse
May have a fix for LTE compiling it now, using the stock apn file with the adjusted mcc mnc numbers.
If I could get root I could get it for sure, but I can't get it to boot with a magisk flashed kernel, even the android 10 special version of magisk.
I got LTE but now mobile network stays disconnected although there is an LTE connection. It's an apn issue will work on it. if I get it working will make a thread...not sure why magisk won't work with my builds / kernel though yet.
https://github.com/codyf86
I've noticed that restarting always restarts to the bootloader. I don't know if it's just me but that's weird
Could you provide a link to the kernel source used in the rom?
Uclydde said:
Could you provide a link to the kernel source used in the rom?
Click to expand...
Click to collapse
It's on his GitHub
The kernel is actually just the stock kernel from the latest firmware with the ',verity' flag hexedited out to disable encryption. (You also need to change the fstab that is in all the guides ever made including my original one), but I'm working on building the kernel and making it work...but I got LTE to woooooork with some changes to the stock apn file lineage provides ! lol.
Only thing now is that it thinks my external sd card is corrupted and wont format right unless i set it to adaptive storage, so make a backup of your external sd card for now. Going to try using TWRP to format it with a couple different file systems.
Here she is boys.
Lineage-17.1-02.22.20-treble-arm-system
Still working on getting it to boost with magisk not sure why it won't when it was fine in Pie.
Still playing with the apn file the apn its using says sprint ehrpd but not sure what makes it pick which apns to show on the screen, but the apn is set to x.boost.ispsn which makes LTE work. I'll clean it up soon.
(All of this is assuming you're on Boost / Sprint)
Related
This is not a guide as such but more of direction to other peoples hard work and effort. I am not a developer, just an experimenter!
Main Credits - @MishaalRahman and @phhusson.
For me one of the main selling points of the Mediapad M5 was being Project Treble enabled. Being a big Nexus/Pixel fan I am not particularly fond of EMUI.
So after reading this detailed and clear guide by Mishaal Rahman http://www.xda-developers.com/flash-generic-system-image-project-treble-device/, I was able to successfully install an AOSP Generic System Image by phhusion http://forum.xda-developers.com/project-treble/trebleenabled-device-development/experimental-phh-treble-t3709659
My device - CMR-W09 (10.8" non pro wifi).
I flashed v17 with Gapps and SU and apart from an Android System error upon boot it seems to work ok. I have not had much time to play with it but so far Wifi, Bluetooth, sound, camera, fingerprint sensor, MTP and SD card appear to be working. I had issues with google play not downloading apps but worked after clearing data/cache on google play and google play services. Also have issues with superuser force closing.
For the nervous and unsure, you can easily return to stock Huawei firmware by flashing your devices stock system.img in fastboot.
Obviously bootloader needs to be unlocked see guide - https://forum.xda-developers.com/mediapad-m5/how-to/bootloader-unlock-guide-t3781275 by @Apo11on. You can use Apo11on's root guide to download your firmware to get your stock system.img.
OEM needs to be disabled in developer options.
It is best to factory reset via recovery mode and then boot straight into bootloader to keep FRP unlocked.
Do this at your own risk but please read all the available information and guides on XDA.
pphusion has made other Project Treble roms but I have yet to try them. Hopefully it would be nice if someone could fully develop Lineage for this device.
which rom did you use ? the A/B one or A only ?
It's an A-only device.
I tried AOSP with GAPPS and SU but SuperSU shows the su binary as being occupied through several reboots. Getting the Lineage GSI now and will root with magisk.
Edit:
Blah... Lineage is not an option until we have twrp :/ (at least for me) No way to install GAPPS.
Edit:
SU works with phh's super user available from the play store.
Yes i have the AOSP one now on my AL-09 and it works fine till now. Bugs : home Button not working but fingerprint works, supersu with the phhs one works. Bluetooth sometimes gives an error message. Battery drain is a little bit high. I installed the Huawei camera apk from treble forum and This works also good.
Another Bug is Apps sometimes force closing but Not often.
How is Lineage performing?
A little bit off topic, but how did you unlock the bootloader on the Wifi only version since the website for the code is offline for a few weeks now?
Thanks in advance.
Fantastic to see that Treble works.
On my AL09(ASOP with gapps and su) bluetooth never connects to any of my devices and fc on pairing.
Lineage was a non-starter, since I was unable to get gapps running. I was also getting a vendor mismatch toast. I'm back on the stock .125(C00), no working tether is infinitely more useable than no BT.
It was nice to be able to flash something that didn't brick it and was partially useable.
fargonaz said:
On my AL09(ASOP with gapps and su) bluetooth never connects to any of my devices and fc on pairing.
Lineage was a non-starter, since I was unable to get gapps running. I was also getting a vendor mismatch toast. I'm back on the stock .125(C00), no working tether is infinitely more useable than no BT.
It was nice to be able to flash something that didn't brick it and was partially useable.
Click to expand...
Click to collapse
I understand, Do you think it gets more stable for our device in the future?
florian-m19 said:
I understand, Do you think it gets more stable for our device in the future?
Click to expand...
Click to collapse
I think so, if you look at the github comments there is a huawei phone having the same problem, so as long as a phone is having problems it should get fixed
We would like some screenshots to see if this is real @AndDiSa @rcstar6696 @phhusson @MishaalRahman
Just installed it, attached a few screenshots. Haven't tested it a lot, but it boots.
Wie are Not joking, its real ??
Delete, double post
I will be getting my Mediapad M5 8.4 tomorrow and will be flashing the AOSP treble build straight away. Just a heads up a updated build has just been posted with some Huawei related fixes.
i flash it now, and give feedback tomorrow
I flashed the new one with gapps and su, and for the sht-l09 there is no working bluetooth, so that's as far as I go. It will be nice when the BT is fixed for this device.
Works good with dirty flash, Home Button is working now and also Automatic Brightness, but battery draining is really high and it gets hot.
florian-m19 said:
Works good with dirty flash, Home Button is working now and also Automatic Brightness, but battery draining is really high and it gets hot.
Click to expand...
Click to collapse
Have you tried changing the cpu governor? Is it set to something like interactive? I got my Mediapad today but I am waiting for the bootloader unlock code from Huawei.
darren1 said:
Have you tried changing the cpu governor? Is it set to something like interactive? I got my Mediapad today but I am waiting for the bootloader unlock code from Huawei.
Click to expand...
Click to collapse
yes it is on interactive, should i change this ?
florian-m19 said:
yes it is on interactive, should i change this ?
Click to expand...
Click to collapse
Might be worth experimenting with. Try conservative or ondemand if they are available. You can always change back if it doesn't make any difference.
darren1 said:
Might be worth experimenting with. Try conservative or ondemand if they are available. You can always change back if it doesn't make any difference.
Click to expand...
Click to collapse
okay i change it in helix engine to ondemand and the suspend engine is now on powersafe.
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
I'm using nano/pico gapps.
Instructions
1. Install custom recovery
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Work
Almost all
Known Issues
- video record
Links
1. 20200229: initial build: https://drive.google.com/file/d/1_JE8xGHpAqd9JQ-Trd4p3TazqLGWZ83k/view?usp=sharing
Gapps
https://opengapps.org
Recovery
Official version is too old and will not work with latest lineage builds (theoretically you can remove first 2 lines from "\META-INF\com\google\android\updater-script" and install using official). I made repack of more fresh twrp recovery. Only one problem here: after turn-off screen, it cannt turn-on again. Hold volume up + power + home combination untill you back to recovery. Or you can in recovery in settings disable screen timeout.
for recovery: https://drive.google.com/file/d/1eIrN8byqXx5qSfQ2iXTVXbTKSe11eWM5/view?usp=sharing
for odin: https://drive.google.com/file/d/1uezAZWPp9G5EIiuQZYveZY8465UYCBKw/view?usp=sharing
Sources
Sources: https://github.com/Lineageos
Device: https://github.com/Valera1978/android_device_samsung_picassolte
Kernel: https://github.com/Valera1978/android_kernel_samsung_msm8974
Vendor: https://github.com/Valera1978/android_vendor_samsung_picassolte
Thanks
Thanks to LineageOS team
Just updated from lineage-13.0-20190417. Everything I use daily seems to work. (I don't use phone/LTE, BT or Camera). Extra bonus: The capacitive buttons lit up for the first time in years.
The only issue I've found so far is that auto-rotate sometimes stops working.
Huge thanks to @Valera1978 for keeping our device alive!
deleted
Awesome. Is there a way, to get this on t520 too?
Gesendet von meinem SM-T520 mit Tapatalk
ChilliBo said:
Awesome. Is there a way, to get this on t520 too?
Click to expand...
Click to collapse
Not very likely. T320, T325 and T525 have Qualcomm Snapdragon SoC's inside, so most of the codebase can be shared between them. T520 has Exynos which is a totally different beast.
And, yes, it's a brilliant ROM. Been my daily driver since my first post to this thread despite the problems with auto-rotation. I'm using the "Rotation Control" app, which makes it just a minor annoyance.
Unbelievable! Thank you very very much! Everything works. Feels like a new tablet!
Are you also working on Android 10?
Thanks a lot for this ROM!!! I just have a problem with Skype: in every call the other person doesn`t hear me. Sound recording - however - works. What can I do?
elcampesino said:
Skype: in every call the other person doesn`t hear me. Sound recording - however - works. What can I do?
Click to expand...
Click to collapse
This fix posted in the LOS16 for T320/T325 thread might work:
https://forum.xda-developers.com/showpost.php?p=82325901&postcount=176
M0lle said:
This fix posted in the LOS16 for T320/T325 thread might work:
https://forum.xda-developers.com/showpost.php?p=82325901&postcount=176
Click to expand...
Click to collapse
Thanks for your hint. Unfortunately, it didnt work for me. However the reason might be, that I am really a beginner on LineageOS and patching Android devices.
I copied the file (mixer_paths.xml) and edited the build.prop with "build.prob.editor".
Result is, that there is no sound at all any more, what remains even after restoring the old data.
Can someone help me?
deleted
elcampesino said:
Thanks for your hint. Unfortunately, it didnt work for me. However the reason might be, that I am really a beginner on LineageOS and patching Android devices.
I copied the file (mixer_paths.xml) and edited the build.prop with "build.prob.editor".
Result is, that there is no sound at all any more, what remains even after restoring the old data.
Can someone help me?
Click to expand...
Click to collapse
Ok, I managed to fix it.
Just change in /system/build.prop the value from vendor.dedicated.device.for.voip=true
to vendor.dedicated.device.for.voip=false.
And then Skype works with microphone!
Best regards!
Installed today, works like a charm, even SD card is detected on startup.
Thank you for giving my 3 devices (T320, T325, T525) a new life!
elcampesino said:
Ok, I managed to fix it.
Just change in /system/build.prop the value from vendor.dedicated.device.for.voip=true
to vendor.dedicated.device.for.voip=false.
And then Skype works with microphone!
Best regards!
Click to expand...
Click to collapse
this advice helped. thank you author
[email protected] said:
this advice helped. thank you author
Click to expand...
Click to collapse
Does someone use mobile Internet on this firmware? For unknown reasons, the sim card is lost. On the drain this was not. helps (not always) switching to airplane mode and subsequent reboot
deleted
Thank you for this ROM. It's quite stable.
However, auto rotation is not always working.
Looking forward to the Android 10 ROM for T525 ?
Abb4d0n said:
However, auto rotation is not always working.
Click to expand...
Click to collapse
That's the only small issue I have with this ROM. With Rotation Control, though, it's more than manageable.
Hi
I have a T525 which was running android 4.4 . I am a newbie and manage to change the TWRP and install the above version of LineageOS however I am struggling to find a version of GApps that works. Can anyone point me in the right direction.
Thanks
Rob
rob46 said:
I am struggling to find a version of GApps that works.
Click to expand...
Click to collapse
Open GApps Pico has worked very well for me with both 16.0 and 17.1.
Platform: ARM
Android: 9.0
Variant: Pico
Nano should be ok as well. Just avoid any variant which installs the Pixel Launcher. I had huge problems with it when I initially flashed Stock GApps with 16.0. Since then I've gone with Pico with zero problems.
P.S. Why would you want to install 16.0 when 17.1 is available with frequent (= monthly) updates? I'm fairly sure @Valera1978 won't be pushing out another version of 16.0. The latest available version is from February.
I have a question, it's more convenient install this build or the android q build? which one of theese will be much supported?
As the title says, here's a list of some GSI's i have tested so far... but first for some story.
Bought the phone in summer, it's quite nice but has its own issues like no kernel source BUT since we can unlock the device and actually play around, oh boy it has been fun.
On the course of few hours and many downloads later I have a small list of GSI's that worked!
Every GSI I have mentioned REQUIRE device specific patch(es)!!!
For that you have to root.
----------------------WORKING GSI's-------------------------
BlissROM - It boots and functions quite fast
Cons: no included Gapps
Flashing any system editing patch results in "Phone is booting" homescreen.
https://sourceforge.net/projects/treblerom/files/BLESS/2020.09.21/
3.5 jack, VoLTE, Bluetooth, ComboFix patches are required, flash with Magisk manager
DO NOT USE FixLagSmooth
HavocOS 3.7 and 3.6 - Work and can be daily driven
3.6 requires FixLagSmooth patch
MUST root and apply all linked patches (don't use FixLagSmooth on 3.7, you can but no need)
https://forum.xda-developers.com/mi...rom-how-to-install-android-10-gsi-mi-t4126223
AOSP Android 10 based - Also does work and requires patching
https://forum.xda-developers.com/mi...rom-how-to-install-android-10-gsi-mi-t4126223
HydrogenOS Android 10 - Works
Has few bugs
No Google services
https://mirrors.lolinet.com/firmware/gsi/HydrogenOS/
----------------------COMMUNITY REPORTED GSI's-------------------------
Android 11 GSI - Reported to be functional by HumptyPotato47, thanks mate!
No Gapps as of now NikGapps exist for Android 11, search XDA for it!
Requires more testing...
https://github.com/phhusson/treble_experimentations/releases/tag/v300.f
----------------------MAYBE WORKING GSI's-------------------------
OxygenOS 10 GSI - Seems to work.. sorta
First boot after exiting fastboot causes the phone to reboot
Second boot will loop
https://mirrors.lolinet.com/firmware/gsi/OxygenOS/
----------------------NON FUNCTIONAL GSI's-------------------------
You tell me
...I did find a very nice list of GSI ROMs to try out more, here's the link:
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
----------------------FLASHING GSI-------------------------
If you test one then don't hesitate with replying which one, about the experience, bugs and how you installed it.
My method of installing was this:
1. Make sure to have the new adb commandline that supports fastbootd mode
2. Drop the GSI .img file in /adb directory for ease
3. Make sure you're running MIUI with unlocked bootloader and USB debugging enabled
3.5 MAKE SURE you get a GSI ROM with Gapps as existing TWRP isn't fully functional
4. GSI you should have must be AB partition!!!
Once all set then follow the next commands
>adb reboot bootloader
>fastboot -w
>fastboot reboot fastboot
>fastboot erase system
>fastboot flash system "GSI-ROM-name-without-quotes".img
>fastboot reboot bootloader
>fastboot reboot
----------------------SETTING UP GSI-------------------------
Once all that is complete it should boot, if not then that specific GSI does not work.
Also a thing worth mentioning! Whenever I boot this phone to fastbootd Windows keeps forgetting what driver it was which requires
few extra clicks in device manager to set it up for fastbootd use. Including an image with simple to follow instructions if you have the same issue.
>fastboot boot twrp.img
Once in TWRP you should be able to access internal storage with your computer, drag Magisk.zip over and flash. Don't forget to wipe cache!
If it boots normally then root was successful, now apply the linked patch and reboot once again. Since we are playing with GSI:
Head to Settings
Find Phh Treble Settings
Misc features
Check Disable audio effect. -- DISABLE IT AFTER PATCHING!!!
IMPORTANT!!! I only tested Havoc and Bliss for a long period, IF one of my mentioned GSI's or others require more patches then I have linked headphone jack and Bluetooth audio patches too.
Combo fix should do the trick thought so your mileage may vary.
----------------------HELP US-------------------------
IF you find more working GSI's then tell us and I will make sure to add them to the main post so it won't get clogged under other comments!
Update on 05.10.2020 GMT+3
Bliss ROM GSI
As only a day or two have passed I already encountered few issues.
> You cannot remove screenshot sounds, even when fully muted
> Data drain is something interesting I've noticed, consumption compared to MIUI is higher.
> When using the gesture navigation it is a bit buggy when using quick side swipe for multitasking.
Positive notes!
> It is stupid fast
> Battery life is good
> GCam is amazing
> 99% of the customization options work perfectly
> Fast charging modes and such work perfectly
Neutral stuff...
> No FOD, thanks for closed source
> whenever you take a picture or a screenshot and have Blutetooth audio connected, it pauses and plays out loud via speaker. No music leaks out
this phone is born dead, no developer cares about it.
alsartawi said:
this phone is born dead, no developer cares about it.
Click to expand...
Click to collapse
Sad truth but won't stop others from working on it. Eventually we might get a kernel source
Kevin Soosaar said:
Sad truth but won't stop others from working on it. Eventually we might get a kernel source
Click to expand...
Click to collapse
i would pay to see a stable custom rom for this phone, i really loved it.
alsartawi said:
i would pay to see a stable custom rom for this phone, I really loved it.
Click to expand...
Click to collapse
Havoc OS and Bliss ROM are both quite stable, albeit with Bliss you don't get Gapps which is a huge bummer to most users.
Personally I just installed MicroG services and use Aurora store with anonymous "account".
When I tried to flash Gapps with TWRP I ended up soft bricking ROM so it was required to restore stock and try again. Of course there's no need if you can still use fastbootd.
Kevin Soosaar said:
Havoc OS and Bliss ROM are both quite stable, albeit with Bliss you don't get Gapps which is a huge bummer to most users.
Personally I just installed MicroG services and use Aurora store with anonymous "account".
When I tried to flash Gapps with TWRP I ended up soft bricking ROM so it was required to restore stock and try again. Of course there's no need if you can still use fastbootd.
Click to expand...
Click to collapse
does FOD works on Havoc OS?
edit: sorry i just read that it's not working.
alsartawi said:
does FOD works on Havoc OS?
Click to expand...
Click to collapse
FOD is not working as the driver sources are not public, reverse engineering is not possible too afaik. Everything else works.
Should i send this phone back to Amazon?
Seriously, last night i bought it, thinking about to install some custom rom, but if there are no developers caring of it, i might returb the phone to the seller...
IMO MIUI EU is better then GSI roms. Everything works. Got rid of most chinese crap. You can use Magisk.
Have nice features (MIUI in general). The only thing i dont like -mine turns on WIFI byitself dotn know how it happens... but it happens when i sleep. china collecting logs?
https://www.scmp.com/abacus/tech/ar...earch-and-browsing-data-china-researcher-says
afigienas said:
IMO MIUI EU is better then GSI roms. Everything works. Got rid of most chinese crap. You can use Magisk.
Have nice features (MIUI in general). The only thing i dont like -mine turns on WIFI byitself dotn know how it happens... but it happens when i sleep. china collecting logs?
https://www.scmp.com/abacus/tech/ar...earch-and-browsing-data-china-researcher-says
Click to expand...
Click to collapse
Literally the main reason I made this post is to help others who are interested to use GSI ROM's on their devices. I do agree that MIUI has some decent features and I did use Xiaomu.eu before but it was so buggy. In the end I love customizing the device however I like it so MIUI is just not for me. Either way I might try to negotiate with Amazon to get a refund as touch and Bluetooth problems still persist. Fun fact, on Bliss the edge detection is pretty good and not as aggressive or straight out bad.
Simon_19 said:
Seriously, last night i bought it, thinking about to install some custom rom, but if there are no developers caring of it, i might returb the phone to the seller...
Click to expand...
Click to collapse
Actually there are plenty of people ready to build ROMs for Toco (Mi Note 10 Lite) and Tucana (Mi Note 10) but there just isn't any kernel source available. Making things worse is the cancelled release of Toco in India and we know that they are one of the biggest Android ROM builders next to Russians. No one there is gonna import a device like this because better phones for money exist. If you don't like it then yeah I recommend returning otherwise give GSI a try for now and see what happens.
You won't lose warranty as there is no E-fuse like on Samsung phones so locking bootloader and flashing back to stock is enough.
Is anyone try oos gsi ?
HumptyPotato47 said:
Android 11 GSI of phh is working fine. It is very smooth. But i switched back to miui because i can't find any android 11 gapps.
Click to expand...
Click to collapse
can you give the link of the rom?
HumptyPotato47 said:
Android 11 GSI of phh is working fine. It is very smooth. But i switched back to miui because i can't find any android 11 gapps.
Click to expand...
Click to collapse
Hi, there are gapps for Android 11, look for NikGapps here in XDA
Kevin Soosaar said:
Actually there are plenty of people ready to build ROMs for Toco (Mi Note 10 Lite) and Tucana (Mi Note 10) but there just isn't any kernel source available. Making things worse is the cancelled release of Toco in India and we know that they are one of the biggest Android ROM builders next to Russians. No one there is gonna import a device like this because better phones for money exist. If you don't like it then yeah I recommend returning otherwise give GSI a try for now and see what happens.
You won't lose warranty as there is no E-fuse like on Samsung phones so locking bootloader and flashing back to stock is enough.
Click to expand...
Click to collapse
who said its cancelled?
Dr. DoubtReaper said:
who said its cancelled?
Click to expand...
Click to collapse
The mentioned Mi Note 10 Lite for India was supposed to be called Mi 10i or something like that. It quickly disappeared and is not happening.
Of course I might be wrong by this date but looking for now there is no 10i, only speculation videos and threads.
Mi Note 10 Lite for India would've been code named "tocoin", same hardware and everything else so just a rebadge in old Xiaomi fashion... :laugh:
anyone tried new version of blissROM? feedback?
GaryFisher88 said:
anyone tried new version of blissROM? feedback?
Click to expand...
Click to collapse
Not sure if the one I linked is up do date, give it a try yourself as my device went in for warranty repairs.
Hello, I am currently using Xiaomi.eu based on MIUI 12 and I would like to know how to flash HAVOC OS GSI. Should I flash back to Global Rom then flash the GSI as indicated? Answer is greatly appreciated.
StatiXOS
Download StatiXOS for free. StatiXOS is a homebrew distribution of Android. StatiXOS is a custom ROM based on the Android Open Source Project aiming to be minimal and clean, while providing quality of life improvements and up to date security patches. This page is to provide downloads for...
sourceforge.net
4.2 has been release
"Introduce our OTA Updater!"
For those with the Chrome issue of freezing I have a fix that another user in another ROM thread accidentally found!
If you download
PH1-OTA-PQ1A.190105.090.zip
and then reboot into recovery (TWRP, be sure to disable pin on phone before hand and backup everything) then flash the above (I wiped everything first but DON'T wipe internal storage) then I did a second wipe of everything but internal storage and then I flashed 4.2 of StatiXOS and then I flashed TWRP, then I rebooted phone and set it up from new and restored everything from Cloud backup and I can confirm that I no longer have the Chrome freezing issue.
You can thank seungbaekm over in the Evolution-X 5.4 thread for this fix as he is the one that accidentally flashed the older PH-1 factory image and discovered Chrome then worked again! This should fix the issue for all the new Android 11 ROM 's out there for us folks that have the Chrome browser locking issues.
I did not even test the new 4.2 ROM on its own to see if it happens to fix the Chrome issue but I doubt that it does since it is not mentioned in the release notes. Also I have no idea if any of the other original factory images will also fix the issue, I only downloaded the one they he said he accidentally flashed and used it.
Hope this helps everyone with this issue as I know how frustrating it has been. Sure, there is the Bromite/Brave/Firefox work around, and I have been using and enjoying Bromite since 4.1 but I like having things working the way they are supposed to work.
Thanks you very much
I will test
Following this great insight about the fix of the Chromium issue, I only flashed mata PQ1A.190105.090 NOVENDOR firmware from this old thread, without wiping anything of my current StatiXOS 4.2 installation, and after booting Brave is working perfectly.
So, it seems the issue was caused not by the ROM system or vendor, but the mata QQ1A.200105.007 firmware.
As a consequence of flashing this old no system nor vendor firmware, my device baseband was downgraded, but mobile data seems to be working just fine. I guess it's possible to test newer firmware available at the referenced thread, like PQ1A.190105.112, QP1A.190711.107 or QP1A.190711.148, to identify the latest firmware free of the Chromium issue.
More good news: now Netflix is working fine, also.
UPDATE: I tried all the these firmwares and Netflix worked fine only with the Pie ones. So, PQ1A.190105.112 is the more recent mata firmware that I can use on my PH-1 with StatiXOS 4.2 in order to keep Chromium browsers and Netflix working.
aamadorj said:
Following this great insight about the fix of the Chromium issue, I only flashed mata PQ1A.190105.090 NOVENDOR firmware from this old thread, without wiping anything of my current StatiXOS 4.2 installation, and after booting Brave is working perfectly.
So, it seems the issue was caused not by the ROM system or vendor, but the mata QQ1A.200105.007 firmware.
As a consequence of flashing this old no system nor vendor firmware, my device baseband was downgraded, but mobile data seems to be working just fine. I guess it's possible to test newer firmware available at the referenced thread, like PQ1A.190105.112, QP1A.190711.107 or QP1A.190711.148, to identify the latest firmware free of the Chromium issue.
More good news: now Netflix is working fine, also.
UPDATE: I tried all the these firmwares and Netflix worked fine only with the Pie ones. So, PQ1A.190105.112 is the more recent mata firmware that I can use on my PH-1 with StatiXOS 4.2 in order to keep Chromium browsers and Netflix working.
Click to expand...
Click to collapse
This is some great news, thank you and SirDigitalKnight for the research! I haven't tried this fix yet, but I'm planning to when I flash this week if I do run into the chrome freeze problem. You mentioned this downgrades the device baseband version. I'm not too familiar with that, you did say it's working fine so far, but do you think that could cause issues in the future?
Just a question, does StatiXOS have slim recents included?
Mous3kteer said:
This is some great news, thank you and SirDigitalKnight for the research! I haven't tried this fix yet, but I'm planning to when I flash this week if I do run into the chrome freeze problem. You mentioned this downgrades the device baseband version. I'm not too familiar with that, you did say it's working fine so far, but do you think that could cause issues in the future?
Click to expand...
Click to collapse
I have no idea if using a.Pie firmware could have side effects in the future. So far, I haven't seen any.
Using the StatiXOS Telegram support group, I shared the information about the different firmwares to the devs, so I think they'll tell us if something can go wrong in the future.
Is anyone else having issues with sending a text message with this rom?
vineetbhatia said:
Is anyone else having issues with sending a text message with this rom?
Click to expand...
Click to collapse
If you have VoLTE on, turn it off
vineetbhatia said:
Is anyone else having issues with sending a text message with this rom?
Click to expand...
Click to collapse
If you have VoLTE on, turn it off
Double Post
Just reporting that I did a clean install - "Fastboot -w" on the latest working firmware (JAN20 FW, FEB20 Vendor iirc) and I'm very impressed.
Plus replaced the screen, battery, and buttons cable and now the phone is "essentially" new. Parts are actually quite cheap.
Chrome is working without issues.
360 Camera is working without issues
Haven't tried sending SMS with VoLTE On yet.
Amazing that we still a maintainer.
chanh2018 said:
If you have VoLTE on, turn it off
Click to expand...
Click to collapse
Yup, that worked. Thanks mate..
The March 10th update they pushed out through the OTA updater worked perfectly. It is nice to see we still have good support on this great phone.
SirDigitalKnight said:
For those with the Chrome issue of freezing I have a fix that another user in another ROM thread accidentally found!
Click to expand...
Click to collapse
Thank you for this! And also thanks to @aamadorj for the further investigation!
It's too much of a hassle for me to do this fix right now, and I admit I have adapted to using Bromite and Firefox, but I'll definitely keep this in mind for some other time when I feel more like it... BTW, I did check, and Chrome stil freezes on the latest 4.2 update, no surprise here.
This ROM has been working great for me, very stable, no issues, and the updates are a breeze, especially with the latest OTA updater.
kt-Froggy said:
Thank you for this! And also thanks to @aamadorj for the further investigation!
It's too much of a hassle for me to do this fix right now, and I admit I have adapted to using Bromite and Firefox, but I'll definitely keep this in mind for some other time when I feel more like it... BTW, I did check, and Chrome stil freezes on the latest 4.2 update, no surprise here.
This ROM has been working great for me, very stable, no issues, and the updates are a breeze, especially with the latest OTA updater.
Click to expand...
Click to collapse
You should be able to flash the older Pie firmware without wiping from what I have read but I have not tried that yet. I might try it with the very latest firmware of Pie, PQ1A.190105.112 and see if it screws anything up without wiping the phone. Anyway I always to a backup of the phone to the cloud and also of Whatsapp before I start messing around just in case I have to wipe and so far all my restores have worked perfectly, but yes it is a pain to have to setup wifi's and add back in BT devices and setup security and any double authentication apps you use. Getting used to it now though.
SirDigitalKnight said:
You should be able to flash the older Pie firmware without wiping from what I have read but I have not tried that yet. I might try it with the very latest firmware of Pie, PQ1A.190105.112 and see if it screws anything up without wiping the phone. Anyway I always to a backup of the phone to the cloud and also of Whatsapp before I start messing around just in case I have to wipe and so far all my restores have worked perfectly, but yes it is a pain to have to setup wifi's and add back in BT devices and setup security and any double authentication apps you use. Getting used to it now though.
Click to expand...
Click to collapse
Flashing the contents of the attached files using fastboot should make your device to use last firmware for Android Pie, without losing your current ROM installation.
aamadorj said:
Flashing the contents of the attached files using fastboot should make your device to use last firmware for Android Pie, without losing your current ROM installation.
Click to expand...
Click to collapse
OK, here is my update... Noting your comment in the other post about the downgraded baseband, I decided to exclude the modem from flashing. Flashed everything else from PQ1A.190105.112-NOVENDOR via fastboot, rebooted, and... Chrome froze again. Ugh... :\ OK. I went back to fastboot and flashed the modem - this time after the reboot the problem was fixed.
So, I'd say it's safe to conclude that the modem (baseband) is the actual component that was screwing up the Chromium-based browsers. Go figure...
This ROM is great on the PH-1. At the moment I can't get the LED to blink when notifications arrive. The setting is toggled on.
I've installed magisk, nanodroid and microg (not tried that sort of thing before!). Could that have anything to do with it?
chrisrg said:
This ROM is great on the PH-1. At the moment I can't get the LED to blink when notifications arrive. The setting is toggled on.
I've installed magisk, nanodroid and microg (not tried that sort of thing before!). Could that have anything to do with it?
Click to expand...
Click to collapse
Even with stock rom LED is not blink if you're using stock messages, try Textra and see if it works for you.
roms - Google Drive
drive.google.com
This ROM is built using binaries from non-european (TEE) version of Jelly 2. Theoretically it should work on european (EEA). If it won't - contact me, I'll prepare ROW based on EEA binaries.
ROM can be installed via TWRP. How to install TWRP - https://forum.xda-developers.com/t/recovery-twrp-3-5-2-unihertz-jelly-2.4281493/
Source code - https://github.com/Meetoul/android_device_Unihertz_Jelly2
UPD. Experimental version of Lineage OS 18.1 (Android 11) is also available by the attached GDrive link.
Hi, would you be willing to share the source repo and build instructions? Thanks!
lakkimsetty.baba said:
Hi, would you be willing to share the source repo and build instructions? Thanks!
Click to expand...
Click to collapse
Here you go https://github.com/Meetoul/android_device_Unihertz_Jelly2
Meetoul said:
roms - Google Drive
drive.google.com
This ROM is built using binaries from non-european (TEE) version of Jelly 2. Theoretically it should work on european (EEA). If it won't - contact me, I'll prepare ROW based on EEA binaries.
ROM can be installed via TWRP. How to install TWRP - https://forum.xda-developers.com/t/recovery-twrp-3-5-2-unihertz-jelly-2.4281493/
Source code - https://github.com/Meetoul/android_device_Unihertz_Jelly2
Click to expand...
Click to collapse
Thanks for developing the room
But unfortunately it does not work
After burning in twrp it constantly makes a boot loop
I tried several times
I'll be happy if you can fix that
(Sorry for my obscure language, I use translation,)
Gon112 said:
Thanks for developing the room
But unfortunately it does not work
After burning in twrp it constantly makes a boot loop
I tried several times
I'll be happy if you can fix that
(Sorry for my obscure language, I use translation,)
Click to expand...
Click to collapse
Hi!
What version of Jelly2 do you have? TEE, EEA, JP?
Meetoul said:
Hi!
What version of Jelly2 do you have? TEE, EEA, JP?
Click to expand...
Click to collapse
NONE EEA
Gon112 said:
NONE EEA
Click to expand...
Click to collapse
Sorry, I cannot understand you.
Please put a number that corresponds to the yours Jelly2 version
TEE
EEA
JP
1
Meetoul said:
Sorry, I cannot understand you.
Please put a number that corresponds to the yours Jelly2 version
TEE
EEA
JP
Click to expand...
Click to collapse
1
Gon112 said:
1
Click to expand...
Click to collapse
The ROM is already built on top of the latest TEE binaries and it works on my Jelly2...
Probably, you have faced some issues during flashing the ROM. Please flash your Jelly2 back to stock ROM using SP Flash Tool and try again.
I have been using this ROM for couple of weeks now, it seems solid - didn't crash or had any issues.
The battery life however is very bad. I am using Magisk ACC module to limit the charge to 70% and it dropped from 70% to 34~37% within 8-ish hours (while I am asleep) consistently with all radios off (with regular cell network on for calls and texts, LTE off). The stock ROM used to drop at most 3% while I am asleep.
I think the stock ROM has aggressive app kill/ background process limit. I am going to try with those options enabled (in developer options) to see if there's going to be an improvement.
If anyone had issues like the above and has a conf, do let me know, thanks!
Edit: Forgot to mention that I also use AccuBattery and Greenify. Greenify is set to kill all user apps except for Magisk and AccuBattery.
I have the EU Version of Jelly 2, and yet it seems to work fine
Thank you very much for your efforts.
If i find any bugs ill report them
beck.hannes said:
I have the EU Version of Jelly 2, and yet it seems to work fine
Thank you very much for your efforts.
If i find any bugs ill report them
Click to expand...
Click to collapse
Thank you for your feedback. Probably, I won't fix the bugs in LOS 17.1, cause now I'm working on LOS 18.1 (based on Android 11) .
You can try it by this link https://drive.google.com/file/d/1kG8ebEf-GZW_AZ_d42HuxHHmHv0sQDl5/view?usp=sharing
Please note that I'm trying to keep this ROM as clean as possible, so currently it does not contain any proprietary Mediatek or Unihertz binaries (except vendor image, of course ). It means, that ROM does not include FM Radio or IMS. AFAIK, VoLTE is barely supported in Ukraine (yes, I live here ), so this feature is not really necessary for me. But I'll try to get those features working in future, just to have fully functional Jelly 2.
What's tested and working:
Voice Call
SMS
WiFi
Bluetooth
Wired headset
NFC (it reads and emulates tags, GPay doesn't work because of SafetyNet, but I think I can bypass it)
IR remote control (I tested with ZaZa remote software)
Meetoul said:
Thank you for your feedback. Probably, I won't fix the bugs in LOS 17.1, cause now I'm working on LOS 18.1 (based on Android 11) .
You can try it by this link https://drive.google.com/file/d/1kG8ebEf-GZW_AZ_d42HuxHHmHv0sQDl5/view?usp=sharing
Please note that I'm trying to keep this ROM as clean as possible, so currently it does not contain any proprietary Mediatek or Unihertz binaries (except vendor image, of course ). It means, that ROM does not include FM Radio or IMS. AFAIK, VoLTE is barely supported in Ukraine (yes, I live here ), so this feature is not really necessary for me. But I'll try to get those features working in future, just to have fully functional Jelly 2.
What's tested and working:
Voice Call
SMS
WiFi
Bluetooth
Wired headset
NFC (it reads and emulates tags, GPay doesn't work because of SafetyNet, but I think I can bypass it)
IR remote control (I tested with ZaZa remote software)
Click to expand...
Click to collapse
Hi
How many times have I tried to install LOS 17.1 it did not work,
Now I have tried to install LOS 18.1 and it works fine and perfect
Thanks!!
I'll be happy if you can add support for things you mentioned that are not currently supported,
Thank you good man.
Meetoul said:
AFAIK, VoLTE is barely supported in Ukraine (yes, I live here ), so this feature is not really necessary for me. But I'll try to get those features working in future, just to have fully functional Jelly 2.
Click to expand...
Click to collapse
Would it help for you to have someone test VoLTE (and possibly WiFi calling?)
I'm considering picking one of these up and was just assesing what the community is behind it for custom ROMs. I had the original Jelly and the ROM community for that was very limited, and I was in over my head when trying to build it for myself. I would be glad to help however if you think you'll be using the device for a while
Meetoul said:
Thank you for your feedback. Probably, I won't fix the bugs in LOS 17.1, cause now I'm working on LOS 18.1 (based on Android 11) .
You can try it by this link https://drive.google.com/file/d/1kG8ebEf-GZW_AZ_d42HuxHHmHv0sQDl5/view?usp=sharing
Please note that I'm trying to keep this ROM as clean as possible, so currently it does not contain any proprietary Mediatek or Unihertz binaries (except vendor image, of course ). It means, that ROM does not include FM Radio or IMS. AFAIK, VoLTE is barely supported in Ukraine (yes, I live here ), so this feature is not really necessary for me. But I'll try to get those features working in future, just to have fully functional Jelly 2.
What's tested and working:
Voice Call
SMS
WiFi
Bluetooth
Wired headset
NFC (it reads and emulates tags, GPay doesn't work because of SafetyNet, but I think I can bypass it)
IR remote control (I tested with ZaZa remote software
Click to expand...
Click to collapse
Meetoul said:
Thank you for your feedback. Probably, I won't fix the bugs in LOS 17.1, cause now I'm working on LOS 18.1 (based on Android 11) .
You can try it by this link https://drive.google.com/file/d/1kG8ebEf-GZW_AZ_d42HuxHHmHv0sQDl5/view?usp=sharing
Please note that I'm trying to keep this ROM as clean as possible, so currently it does not contain any proprietary Mediatek or Unihertz binaries (except vendor image, of course ). It means, that ROM does not include FM Radio or IMS. AFAIK, VoLTE is barely supported in Ukraine (yes, I live here ), so this feature is not really necessary for me. But I'll try to get those features working in future, just to have fully functional Jelly 2.
What's tested and working:
Voice Call
SMS
WiFi
Bluetooth
Wired headset
NFC (it reads and emulates tags, GPay doesn't work because of SafetyNet, but I think I can bypass it)
IR remote control (I tested with ZaZa remote software)
Click to expand...
Click to collapse
Hey, as far as i tested everything works for me.
There is one thing i noticed:
When booting, Lineage OS tells that the Build has been signed with Public Key, this seems to be a bit of a security issue. Is it possible to resolve that for the LOS 18 version. (Is that testable yet?)
Im fine with not having VoLTE, i think no Custom Rom is able to support it yet and it will just get important when the 3G network will be disabled...
Also if you need more help for testing specific stuff, i can do it.
beck.hannes said:
Hey, as far as i tested everything works for me.
There is one thing i noticed:
When booting, Lineage OS tells that the Build has been signed with Public Key, this seems to be a bit of a security issue. Is it possible to resolve that for the LOS 18 version. (Is that testable yet?)
Im fine with not having VoLTE, i think no Custom Rom is able to support it yet and it will just get important when the 3G network will be disabled...
Also if you need more help for testing specific stuff, i can do it.
Click to expand...
Click to collapse
@Meetoul I installed the LineageOs 18 now which seems to be fine too.
2 Warnings appear after boot. Again the one with the public key, and a new one: "Serial Console active"
My apologies for cross posting. But I initially replied in the wrong topic.
I just received my Jelly 2. It was on 2020 and I went straight through your files. Your TWRP does not respond on my European Jelly 2. And after a first reboot to recovery, TWRP was gone. What I mean with not responding is that the touch screen does not respond. But I connected an USB trackball to use as an input device and switched cables in between adb sideloads. So I finally got it working.
For some reason during reboot TWRP warns me that there is no OS installed. But LoS 18.1 (yours) booted fine. Also flashed opengapps 2707 nano.
After a reboot (phone is still restoring apps) there is a "serial console is enabled" message "performance is impacted, check bootloader". Any instructions on how to get rid of that message? Other than that so far so good.
Die Bruine said:
My apologies for cross posting. But I initially replied in the wrong topic.
I just received my Jelly 2. It was on 2020 and I went straight through your files. Your TWRP does not respond on my European Jelly 2. And after a first reboot to recovery, TWRP was gone. What I mean with not responding is that the touch screen does not respond. But I connected an USB trackball to use as an input device and switched cables in between adb sideloads. So I finally got it working.
For some reason during reboot TWRP warns me that there is no OS installed. But LoS 18.1 (yours) booted fine. Also flashed opengapps 2707 nano.
After a reboot (phone is still restoring apps) there is a "serial console is enabled" message "performance is impacted, check bootloader". Any instructions on how to get rid of that message? Other than that so far so good.
Click to expand...
Click to collapse
Touch in recovery
Have you tried the latest release which includes fixes for both available touch panes (at least for TEE Jelly2)? If yes and it doesn't work anyway, could you please provide dmesg output from recovery and from normal boot? Output of dmesg should be collected as soon as ADB available. Also, please collect kallsyms using the following steps:
Code:
adb root
adb shell
echo 0 > /proc/sys/kernel/kptr_restrict
sysctl -w kernel.randomize_va_space=0
cat /proc/kallsyms >/sdcard/symbl.txt
exit
exit
adb pull /sdcard/symbl.txt
Annoying "Serial console is enabled" notification
You can just long press on the notification and disable notifications from Development Settings.
Thanks, this 'latest' release works! I am curious though, why do I get the message that there is no OS installed when I reboot from recovery? Or is that gonna be a long as reply .Also a few mount errors during flashing and reboot. But, my phone works for 99%.
Only thing not working in my banking app is the fingerprint sensor, also in the Ebay app (which I use once a year). Do you know why this is? Amazon video, Ziggo streaming app, even my banking app works. Fingerprint to unlock the phone also works. Just not in apps. Is this due to it being unlocked?
I come from a qx1000/Pro1 with LoS 18.1 which died on me Wednesday night. That's why I'm asking. That thing was also unlocked, but no error messages there. Also the Corona check app states that the J2 is rooted (which it isn't). Exactly the same configuration as my Pro1. But no warnings on that phone.
Not real complaints, just thought I'd share. This will be my daily driver for the next few months. So if you need a heavy tester, I'm your man.
@Meetoul
The battery drains in 24 hours, is this normal? I can't find any apps draining it. Could the enabled serial console be the culprit?
Edit2:
Hotspot not working for me. It connects but does not provide an IP address to clients. I tried several stock Android devices, without success. All four devices connect, but keep waiting for an IP address.
So now I'm typing this via Bluetooth sharing, which sucks I can tell you.
If you have any suggestions, I am more than willing to try them out...