Database Info

Mobile Upgrade Q is complete GARBAGE! Stuck on Eluga Switch software. Need help!

I have been attempting to get Mobile Upgrade Q working all day and have had no success because of one stupid little error message...
There is no greater software version available to upgrade your phone, actual version of your phone is the latest.
I can already tell you this isn't true.
To make a long story short, I was aiming to unlock the bootloader on my Idol 3, downgraded to Lollipop via Eluga Switch restore software, installed TWRP, rooted, then attempted to flash Lineage OS 14.1 to the device. It refused to boot, no matter what I did...
Deciding that I wanted to go back to stock firmware, I installed Mobile Upgrade Q 5.1.8, opened the program, and tried to start the upgrade process. However, I was instead greeted with the error I mentioned above, how my device was allegedly already on latest software.
- I've tried using other versions of Mobile Upgrade Q with no success.
- I've tried reinstalling the Alcatel drivers via. the one I copied from my phone to the computer, same result.
- I've tried loading it from the bootloader, and with the device powered off and charging, both of which failed.
- Yes, I've tried wiping data/cache, and even system. I also tried Panasonic Eluga Switch again, which succeeded, but again, I don't want my phone to be branded under Panasonic, and I do want the Marshmallow software...
- I've tried restarts, multiple different drivers, and even relocking the bootloader, all of which failed...
Does anyone know how I can get the Upgrade software to work? I've tried everything I could on my side, and nothing seems to succeed...
Thanks in advance...

Your only chance is to use QFIL and flash stock ROM. You need to google and try to find a suitable ROM. May i suggest 4pda.ru website. It's russian but google translate does well enough. It has a lot of useful information for both variants, 4.7 or 5.5 version . Idol 3 is the worse when it comes to rooting, flashing etc. Don't mess with it. You can easily ruin it for good.

Sportsmaster said:
Your only chance is to use QFIL and flash stock ROM. You need to google and try to find a suitable ROM. May i suggest 4pda.ru website. It's russian but google translate does well enough. It has a lot of useful information for both variants, 4.7 or 5.5 version . Idol 3 is the worse when it comes to rooting, flashing etc. Don't mess with it. You can easily ruin it for good.
Click to expand...
Click to collapse
Thank you for the response...
Do you know where I can find the stock firmware file? I couldn't navigate through 4PDA that well due to the Russian interface, and Google Translate did little to no help.
Thanks
- Geofire

http://4pda.ru/forum/index.php?showtopic=702765
Here you go. Use google translate for more details.
If your model is 5.5 you can find it in this forum.
That's all i can do for you. I know it's not much. Sorry about that.

I need help too bs i flashed the russian MM 6039Y and i lost the dual sim and 4g i cant fixed
I tried the mobile upgrade but not works stuck on (20/100) i think is a server problem because not download
Soo i need the 6039J stock rom this is a dual sim model
---------- Post added at 09:30 PM ---------- Previous post was at 08:52 PM ----------
Federck said:
I need help too bs i flashed the russian MM 6039Y and i lost the dual sim and 4g i cant fixed
I tried the mobile upgrade but not works stuck on (20/100) i think is a server problem because not download
Soo i need the 6039J stock rom this is a dual sim model
Click to expand...
Click to collapse
After hours of searching I found a version that worked! but I do not solve my problem, I still have the problem of dual sim and 4g
this specific version worked for me, I hope that you too
I can not put the link because I'm a new user but you can send me a private message and I can give it to you

Hi guys! I have alcatel software that restores your phone back to stock similar to mobile upgrade q. It wipes everything back to factory rom. Just let me know if you want the link and instructions on how to use it because it can get a bit complicated.

Hi, I'm having trouble with the mobile upgrade q software. Can you please share any links/instructions on how to possibly get this working? I have a 6045O which was already upgraded to MM and now I'm stuck...

i want link and instructions of the tool similar to alcatel software upgrader.pls

Yes please post it

chewyboy0 said:
Hi guys! I have alcatel software that restores your phone back to stock similar to mobile upgrade q. It wipes everything back to factory rom. Just let me know if you want the link and instructions on how to use it because it can get a bit complicated.
Click to expand...
Click to collapse
Hi,
yes please... My phone is offline for now...
Thanks,

chewyboy0 said:
Hi guys! I have alcatel software that restores your phone back to stock similar to mobile upgrade q. It wipes everything back to factory rom. Just let me know if you want the link and instructions on how to use it because it can get a bit complicated.
Click to expand...
Click to collapse
Hello @chewyboy0, you mean flashing latest stock ROM or just wipe partitions?

Hi, the software does wipe and then it flashes the latest stock rom, I do not have the phone currently but I can update on the procedure once I get the device since I have upgraded to a Samsung galaxy note 5 and I gave the old idol 3 to a friend

chewyboy0 said:
Hi, the software does wipe and then it flashes the latest stock rom, I do not have the phone currently but I can update on the procedure once I get the device since I have upgraded to a Samsung galaxy note 5 and I gave the old idol 3 to a friend
Click to expand...
Click to collapse
It would be nice, I'm sure many people will use it.

Hi all! Sorry for the late delay but I have not had the idol and still do not have it unfortunately. I will upload the software to google drive but be mindful that it does require a password to actually get into the program as I assume that it is used in Alcatel's factory to install the software update to the device.
~Jason

chewyboy0 said:
Hi guys! I have alcatel software that restores your phone back to stock similar to mobile upgrade q. It wipes everything back to factory rom. Just let me know if you want the link and instructions on how to use it because it can get a bit complicated.
Click to expand...
Click to collapse
I want it man! If you are still there my idol 4 is dead plz help man

paulkitteh said:
I want it man! If you are still there my idol 4 is dead plz help man
Click to expand...
Click to collapse
Hiya! I have a guide here: https://forum.xda-developers.com/idol-3/general/guide-restore-idol-3-to-factory-rom-t3769739
I'm not sure if it will work with the Idol 4 but if it does not have the model number listed in the program you might want to try updating it using the dialog box that pops up at startup. Before updating the program, try seeing if it has your idol 4's model number listed and then if it doesn't close out of the program, reopen it, then update it.
Hope all goes well,
Jason

Lenovo s5 (k520) ZUI 3.7.177 ST Got root anyone?

Just got a new Lenovo s5 (k520 running ZUI 3.7.177 ST) but can't root it (tried KingRoot and Root Genius so far).
It has a nasty little OS (ZUI 3.7) which keeps killing apps it doesn't like. It took me two days to find an adblocker which would work (AdClear) after trying Dns66, Blokada and a couple of others which I can't recall. It's tightly locked down.
* Anyway, my question is... Has anyone had any luck with rooting this phone or OS?
* Or, has anyone any suggestions for apps or rooting options which might be more successful?
If there's any other people out there with this phone, I would seriously consider chipping in to buy one for a dev to work with... give me a yell if you're interested.
Cheers,
Specs:
OS ZUI 3.7 (based on Android O)
CPU Qualcomm Snapdragon 625 2.0GHz Octa core
ROM 64GB
RAM 4GB
Edit: Hmmm, I was hoping that the latest Magisk beta (16.6) might help, but no luck. It does seem to get further along but fails with an 'unable to find boot image' message (my apologies for not being able to quote that accurately). Nothing seems able to find that .img. Can't back it up either as no app can find it. Yes, I need to brush up my adb skills ...my last effort ended in an error reporting lack of appropriate key, as I recall (sorry, have a bit of a flu just now). Anyway, has anyone else been able to look at this phone? Anyone have any ideas (or just thoughts) about what I can do here?
Thanks.

Just to update.... I have tried every simple rooting option I can find -with no luck.
I have found one reference to installing twrp & rooting this phone, but I'm unsure how legit it is ...it just looks a little like its put together by a script; but maybe they just copy/paste a lot when writing tutes? (I have written to them but have had no response from them in a week). The tutorial makes reference to a dev/group in China successfully installing twrp, but only on a Chinese release, not international.
Anyway, I'm wondering if anyone knows of the group or people referenced at
http://tutoraplikasi.com/cara-root-lenovo-s5/
or if anyone might have an idea of the dev(s) in China working on twrp & lenovo?
Just a shot in the dark, really, but I thought I'd ask anyway.
Cheers.

OK, looks like time for some more serious reading and brushing up of old, much neglected skilz... I will probably close this thread and open another ( if there's no objections) in the xda twrp forum.
If anyone is interested, I'm looking to compile twrp for this device with a view to flashing magisk. Hopefully, it will work. Seems that adb & unlocking the bootloader is the only way I'm going to get to actually see the partitions holding the IMG files etc. (Though I do have one or two ideas about escalating privileges/permissions, but that's a whole other bunch of research -and time which is always short.)
Anyway, if you have an interest in rooting this phone have a look for a thread under twrp Q&A.
Cheers.

Seems like it was just a matter of waiting... XN Logos has come up with a solution, it appears --
https://www.stupdroid.com/2018/07/root-twrp-lenovo-k520.html?m=1
At least I managed some in depth reading in the meantime. I'll report back on success of the procedure.

Hi I have also a Lenovo s5. I hated zui 3.7 too and I succeded in installing Lineage OS 15.1 by phh using only fastboot mode... I tried rooting It but unsuccessfully. Now I want twrp and if it would be possible even root. Did you succeed with XN Logos?

Piepoct said:
Hi I have also a Lenovo s5. I hated zui 3.7 too and I succeded in installing Lineage OS 15.1 by phh using only fastboot mode... I tried rooting It but unsuccessfully. Now I want twrp and if it would be possible even root. Did you succeed with XN Logos?
Click to expand...
Click to collapse
Haven't actually tried yet. After all that looking for a root solution I now have been too busy. Will probably do it this Wednesday. I'll keep you posted. Did lineage work well? Any bugs or other issues? ZUI is a dog.

Yeah everything is okay... In the previous updates there was a problem with the audio in ear but now is solved. The only thing that is a little (but not dramatically) worse is battery life because in zui the fact that the os kills every app in background makes the battery last longer.

Hey guys, I know it is no the perfect thread for this yet this phone almost doesn't exist anywhere on the internet. I have the same issue with apps closing as you do. I wanted to install Lineage OS yet as there is no official release for lenovo S5. I would really appreciate some guidance on which release would I install and how. Would it be via the twrp? Thanks in advance.

maikelos27 said:
Hey guys, I know it is no the perfect thread for this yet this phone almost doesn't exist anywhere on the internet. I have the same issue with apps closing as you do. I wanted to install Lineage OS yet as there is no official release for lenovo S5. I would really appreciate some guidance on which release would I install and how. Would it be via the twrp? Thanks in advance.
Click to expand...
Click to collapse
I'd say its this one, maikelos27...
https://forum.xda-developers.com/pr...evice-development/lineage-phh-treble-t3767690
Should be able to use twrp, or via fastboot as mentioned.

ptpi said:
I'd say its this one, maikelos27...
https://forum.xda-developers.com/pr...evice-development/lineage-phh-treble-t3767690
Should be able to use twrp, or via fastboot as mentioned.
Click to expand...
Click to collapse
Thanks ptpi, I will try that probably today and see how it goes.

Lineage Lenovo S5
I'm from Brazil and I have a lenovo S5. I would like to know if someone installed Lineage on Lenovo S5 and could help me do that. thank you

ptpi said:
I'd say its this one, maikelos27...
https://forum.xda-developers.com/pr...evice-development/lineage-phh-treble-t3767690
Should be able to use twrp, or via fastboot as mentioned.
Click to expand...
Click to collapse
Hello, I'm a lucky owner of this beautifull beast, the Lenovo S5 K520, but with the horfull ZUI3.7. I always have been using Cyanogen and after lineage OS.
It did not luck for me to install it on the Lenovo S5.
I manage to install TWRP-3.2.2-0713 with the help of the S-Droid toolkit for Lenovo S5.
From there, I did try every rom from phh on this page : https://forum.xda-developers.com/project-treble/trebleenabled-device-development/lineage-phh-treble-t3767690
but the best I did get is the first logo of lineage OS going on and never stop for hours. I also did try AOSP treble Rom from this site : https://forum.xda-developers.com/project-treble/trebleenabled-device-development/experimental-phh-treble-t3709659, but there I'm getting the Android text changing of ligth theme, but bothing more.
Could you please tell us the procedure and the version of the software you are using so that you are able to use Lineage OS on a Lenovo S5 K520?
Thanks a lot.
Brisferr

Betinhosilva said:
I'm from Brazil and I have a lenovo S5. I would like to know if someone installed Lineage on Lenovo S5 and could help me do that. thank you
Click to expand...
Click to collapse
Hi i did in this way...
1)fastboot -w
2)fastboot erase modemst1
3)fastboot erase modemst2
4) fastboot erase system
5) fastboot erase boot
6) fastboot erase recovery
7) fastboot flash recovery recovery.img
8) fastboot flash boot boot.img
9) fastboot flash system {systemname}.img
The only thing you should do firstly is download the firmware from a video in YouTube whose name is like "ROM Lenovo s5" or something like that and extract the firmware in order to have both boot.img and recovery.img. Hope I could help
P.s. I used phh lineage latest build

Lenovo S5 global version stock rom
Hi everybody!
I was wondering if any of you have a copy of the original ZUI 3.7 non-Chinese stock firmware. I had trouble with my phone and contacted the customer service. Unfortunately, they've sent me the Chinese version (K520_CN_OPEN_USER_Q00011.0_O_ZUI_3.7.355_ST_180412_qpst) and now my phone is almost unusable as the rom only contains crappy Chinese stuff... :crying:
All apps are Chinese and it contains no GApps... I cannot even restore previously save config.
Please help me and send me a backup or the original non-Chinese firmware.
Thank you very much

I didn't even know the existence of an original firmware for non Chinese phones indeed when I bought it it came with a horrible chinese firmware with few translations. Did you find it? Because I want to try it too. If you didn't find it I'm also going to look for it
UnsignedC said:
Hi everybody!
I was wondering if any of you have a copy of the original ZUI 3.7 non-Chinese stock firmware. I had trouble with my phone and contacted the customer service. Unfortunately, they've sent me the Chinese version (K520_CN_OPEN_USER_Q00011.0_O_ZUI_3.7.355_ST_180412_qpst) and now my phone is almost unusable as the rom only contains crappy Chinese stuff... :crying:
All apps are Chinese and it contains no GApps... I cannot even restore previously save config.
Please help me and send me a backup or the original non-Chinese firmware.
Thank you very much
Click to expand...
Click to collapse

How did you unlock your bootloader? Failing to unlock my lenovo s5 k520 bootloader

If I remember correctly just -fastboot oem unlock
dmilz said:
How did you unlock your bootloader? Failing to unlock my lenovo s5 k520 bootloader
Click to expand...
Click to collapse

Piepoct said:
If I remember correctly just -fastboot oem unlock
Click to expand...
Click to collapse
Thanks, rooted and now in bootloop .. Help with stock firmware

I've got only the Chinese one: https://drive.google.com/file/d/15wNyeQ53SbB1xV3gCmXrb-opZSgx2gFQ/view
P.s. I never tested it
dmilz said:
Thanks, rooted and now in bootloop .. Help with stock firmware
Click to expand...
Click to collapse

Piepoct said:
I've got only the Chinese one: https://drive.google.com/file/d/15wNyeQ53SbB1xV3gCmXrb-opZSgx2gFQ/view
P.s. I never tested it
Click to expand...
Click to collapse
will test.. thanks

[Tool] Nubia Red Magic 3S Unbirck Tool

This tool can help you to unbrick the Red Magic 3S. It will restore the phone to the oldest version, you need to update the system software by yourself. This tool is based on Qualcomm firehose protocol, so it should fix all kinds of software issue.
ALL DATA ON YOUR PHONE WILL BE LOST
DO NOT USE THIS TOOL IF YOU ARE RED MAGIC 3!!!!!!!! IT MAY DAMAGE YOUR MOTHER BOARD!!!!!!!YOU MAY VOID THE WARRENTY WITH THIS TOOL
If the tool have any problem, please send me a pm or reply down below.
Download Here:
EU ONLY
NON-EU

Everyone with a rm3 should use this. The SW on rm3s is much more stable. There will be no issues with your phone. I have done 3 already. Everything works fine.

@JerryYin and other members
you might think that sharing middle fingers on our forums looks funny but actually is not at all...
Forum Rules
2. Member conduct.
2.1 Language: XDA is a worldwide community. As a result, what may be OK to say in your part of the world, may not be OK elsewhere. Please don't direct profanity, sexually explicit language or other offensive content toward Members or their work. Conversely, while reading posts from other members, remember that the word you find offensive may not be offensive to the writer. Tolerance is a two-way street
Click to expand...
Click to collapse
a small cleaning has been performed, please keep it civil and report anything that may concern instead of engaging, we are here to deal with whatever you think is not OK.
have fun and enjoy the forums!

suzook said:
Everyone with a rm3 should use this. The SW on rm3s is much more stable. There will be no issues with your phone. I have done 3 already. Everything works fine.
Click to expand...
Click to collapse
Hi Suzook i also confirm that Rm3s brick tool works on RM3 perfectly. I also changed my RM3 rom to Rm3s, thanks for your help..
@ jerry thanks to create a very useful utility..

vijaytechno21 said:
Hi Suzook i also confirm that Rm3s brick tool works on RM3 perfectly. I also changed my RM3 rom to Rm3s, thanks for your help..
@ jerry thanks to create a very useful utility..
Click to expand...
Click to collapse
Yup I already seen a Red Magic 3s with that rare RM3 grill for sale online. Just glad to see people can get a bit more resale value on there RM3 now. Just gotta figure out who is is. I might buy it just to find out.
Jerry said this would happen lol

vijaytechno21 said:
Hi Suzook i also confirm that Rm3s brick tool works on RM3 perfectly. I also changed my RM3 rom to Rm3s, thanks for your help..
@ jerry thanks to create a very useful utility..
Click to expand...
Click to collapse
what u got with rm3s rom? .. whats the new change!! .. and why should i do it?

Found little more optimized rest all is same, transition also find smooth. Rest need to check.

This is not changing a rm3 to a rm3s. Anyone who thinks this, is an IDIOT. What it is doing is giving you a better, more stable FW. Another bonus is TWRP on the NA FW works. No need for the CN FW. Any idiot buying a rm3 with rm3s fw is, well, an idiot.

Well since people are flashing the 3s ROM to the 3 I'll just post this.
While ago I tested this. Found a few issues. Never tested the latest 3s ROM on the 3 but I'll just leave you with these test.
I advise people only use the 3S ROM on the 3S.

install package failure 25% help me !
JerryYin said:
This tool can help you to unbrick the Red Magic 3S. It will restore the phone to the oldest version, you need to update the system software by yourself. This tool is based on Qualcomm firehose protocol, so it
Click to expand...
Click to collapse

phivietnam said:
JerryYin said:
This tool can help you to unbrick the Red Magic 3S. It will restore the phone to the oldest version, you need to update the system software by yourself. This tool is based on Qualcomm firehose protocol, so it
Click to expand...
Click to collapse
Which package are you using?
Click to expand...
Click to collapse

PLease help, I am getting this error message:
"Download port number=8
Downloading firehose programmer...
[Error]: Download programer FAIL.Please check phone status and reset into edl mode and try again.
Software download FAIL.Press any key exit"
I checked Device manager and "Qualcomm HS-USB QDLoader 9008 (COM8)
I also tried to use QFIL but I don't know where to find the .mbn file to use. Please help, thanks in advance

Update: The non eu version worked for me!!! Thank you a ton!

I can also confirm this works on the Red Magic 3 without issue. I have the US version so I used the Non-EU tool. It was straight forward without any issue. This ROM finally has an app drawer!!
My phone seems very stable and runs very quick. It is also able to do OTA updates without issues. I'll comment back if I find any issues.

Oh it has issues lol. You just don't know what your looking for.
He put the disclaimer in for a reason.
Now after a few months I'll post an article about degradation lol

I'm having an issue - the program never asks to install qualcomm drivers like in the guide .docx. Just goes straight to extraction. Am I missing something?
Edit: Nevermind, it seems to be working. Must've had the drivers already installed and for some reason the phone didnt show up properly the first time.

Help me
How to use the tool bro?when I open the downloaded zip,it's always show the file is damaged.Please help.

Do I need the bootloader unlocked? Because I get Download software image fail.

wildchild048 said:
Do I need the bootloader unlocked? Because I get Download software image fail.
Click to expand...
Click to collapse
Nope, no need for unlocked bootloader. Use the Non-EU version.

Having some issues. Super bricked phone. I can get into fastboot and edl.
Tool is not working. I get an error. Download programmer fail. Using another programmer im getting firehose communication handshake failed. I know these works i used it a few times but i did switch over to a new install of windows 10 but im using pro now. 9008 driver is installed showing up in device manager.
Any ideas?

Question I have chinese LE2110 - Can I flash with a global ROM?

I understand that I may not be able to switch to Oxygen, but that's ok, I just need to get rid of all these Chinese apps

So,just got my OP9, literally few hours ago and just turned it on now, it's a LE2110 model (chinese?) flashed with OOS 11.2.4.4.LE25DA which seems to be an Indian version of OOS. Also, on Android if you turn on
USB debugging
You can disable apps via adb

It is possible. Just follow the guide and take your time doing it.
Official OnePlus 9 Oxygen to Color and back
hi everyone I got the official firmware How to install? 1.Download firmware 2.Put the file in the phone directory 3. Open system update, select local update Warning！ 1.Please backup your data！ 2.imei cannot be recognized correctly...
forum.xda-developers.com

I just tried that but I get 'Verification Failed' message when I try to update to Oxygen

I flashed the img manually, so I cannot help. Do not attempt anything over fastboot unless you know what you are doing, we already have several posts about people bricking their phone when they do not take care.

dotuletz said:
So,just got my OP9, literally few hours ago and just turned it on now, it's a LE2110 model (chinese?) flashed with OOS 11.2.4.4.LE25DA which seems to be an Indian version of OOS. Also, on Android if you turn on
USB debugging
You can disable apps via adb
Click to expand...
Click to collapse
Could you let me know how you did that, or point me to a thread please?

noname122414 said:
I flashed the img manually, so I cannot help. Do not attempt anything over fastboot unless you know what you are doing, we already have several posts about people bricking their phone when they do not take care.
Click to expand...
Click to collapse
I've used fastboot before, but never with this brand, I'm not sure which rom I should use or if the process is different

It is the img from the link I posted. I unpacked it and flashed it. But again, make sure you know what you are doing! Nobody can help you when you do a mistake there, read carefully. I will maybe later post a small guide on how to do it.

Question Your device is corrupt. Oneplus 9

I tried putting the beta of OOS13 on my Oneplus and now i get that error message and ive been trying for so long.
the serial number is fb7b98a9

Flash by edl if you can't do it then pm I'll fix it by tv

Could you elaborate a little further? Are you just not able to flash OO13 beta or has the attempt of doing so corrupted your device completely?
If the latter, You will most likely need to flash an emergency MSMToolkit. It is an Indian OP9Pro variant but will bring your device back from the dead. Once that is done, you will just run a proper MSMToolkit and be right as rain.
EtherealRemnant wrote up an amazing guide on how to carry this out. SO amazing that its the only guide stickied on the 9 forums, currently.
- Here is a mega hosted copy of the Indian OP9Pro MSMToolkit,
I can personally vouch for the guide, as my 9 went into a bricked state with vague errors about corrupted system. I tried every toolkit, recovery and ROM and nothing worked. Thats when EthRem came to my rescue. Hopefully his work can come to yours as well.
and if that isn't what you meant and are just dying to get into OOS13, id just stick with one of the many A13 ROMs currently available. OOS13 is beautiful but, i just cant honestly suggest using Oneplus software anymore.
Good luck

applyscience said:
Could you elaborate a little further? Are you just not able to flash OO13 beta or has the attempt of doing so corrupted your device completely?
If the latter, You will most likely need to flash an emergency MSMToolkit. It is an Indian OP9Pro variant but will bring your device back from the dead. Once that is done, you will just run a proper MSMToolkit and be right as rain.
EtherealRemnant wrote up an amazing guide on how to carry this out. SO amazing that its the only guide stickied on the 9 forums, currently.
- Here is a mega hosted copy of the Indian OP9Pro MSMToolkit,
I can personally vouch for the guide, as my 9 went into a bricked state with vague errors about corrupted system. I tried every toolkit, recovery and ROM and nothing worked. Thats when EthRem came to my rescue. Hopefully his work can come to yours as well.
and if that isn't what you meant and are just dying to get into OOS13, id just stick with one of the many A13 ROMs currently available. OOS13 is beautiful but, i just cant honestly suggest using Oneplus software anymore.
Click to expand...
Click to collapse
applyscience said:
Could you elaborate a little further? Are you just not able to flash OO13 beta or has the attempt of doing so corrupted your device completely?
If the latter, You will most likely need to flash an emergency MSMToolkit. It is an Indian OP9Pro variant but will bring your device back from the dead. Once that is done, you will just run a proper MSMToolkit and be right as rain.
EtherealRemnant wrote up an amazing guide on how to carry this out. SO amazing that its the only guide stickied on the 9 forums, currently.
- Here is a mega hosted copy of the Indian OP9Pro MSMToolkit,
I can personally vouch for the guide, as my 9 went into a bricked state with vague errors about corrupted system. I tried every toolkit, recovery and ROM and nothing worked. Thats when EthRem came to my rescue. Hopefully his work can come to yours as well.
and if that isn't what you meant and are just dying to get into OOS13, id just stick with one of the many A13 ROMs currently available. OOS13 is beautiful but, i just cant honestly suggest using Oneplus software anymore.
Good luck
Click to expand...
Click to collapse
The tool that you linked doesnt have o2 as he is saying in the guide.
Also yes, i tried flashing OOS13 and it just corrupted my device i've been endlessly working to fix it all day

SubColdSnow said:
The tool that you linked doesnt have o2 as he is saying in the guide.
Also yes, i tried flashing OOS13 and it just corrupted my device i've been endlessly working to fix it all day
Click to expand...
Click to collapse
1st of all flash with op9pro india msm with uncheck sah and check lite firehorse if u have hard bricked ur device then the next steps as mention above

rizzmughal said:
1st of all flash with op9pro india msm with uncheck sah and check lite firehorse if u have hard bricked ur device then the next steps as mention above
Click to expand...
Click to collapse
i tried and just get device does not match image

SubColdSnow said:
i tried and just get device does not match image
Click to expand...
Click to collapse
try it again. if anything, you will be attempting on the other slot. Many haves had issues and it just started working.
it could have been slot related, or possibly some minor detail that is finicky. (ex. you usually want to start the msmtoolkit and let it stay in the "waiting for device" phase and plug in your phone (which should be in EDL mode . youll know by the peeps of it habitually connecting/disconnecting on your PC)
assure you have india selected, assure you have the proper conditionals on/off per the guide's explication.
Assure you have the qualcom drivers installed, and they reflect the naming convention.
follow along the guide again and Just keep attempting it and don't get discouraged. Part of the reason people offer guides here is that they themselves failed many times until they got they figured it out and are trying to save people from it.
youll get it, dont worry.

I had this problem because I flashed a custom kernel on a custom rom today

SubColdSnow said:
i tried and just get device does not match image
Click to expand...
Click to collapse
try the modded msm tool. it worked for me.