Database Info

download mode?

So I downloaded the drivers and nvflash, unzipped into their respective folders, but I'm then I'm done lol. I took the battery out, held volume up/down, and plugged up USB. All I'm getting is an LG Logo. Is that right? On my sgs2, it actually shows that it goes into download mode. Not so on this phone? Also, I'm on windows xp and its not reconizing this device. Ideas? Info? I'd REALLY like to get this device rooted and juiced up. Need to make a point to nay sayer wife

twatts723 said:
So I downloaded the drivers and nvflash, unzipped into their respective folders, but I'm then I'm done lol. I took the battery out, held volume up/down, and plugged up USB. All I'm getting is an LG Logo. Is that right? On my sgs2, it actually shows that it goes into download mode. Not so on this phone? Also, I'm on windows xp and its not reconizing this device. Ideas? Info? I'd REALLY like to get this device rooted and juiced up. Need to make a point to nay sayer wife
Click to expand...
Click to collapse
Try a different USB cable. With both volume buttons held when you plug in the phone with battery out system should recognize it and ask to install drivers. Post again if that does not happen.
-- The noob says:
This just in... my IQ has increased 50 points thanks to the g2x!

This method worked for me
twatts723 said:
So I downloaded the drivers and nvflash, unzipped into their respective folders, but I'm then I'm done lol. I took the battery out, held volume up/down, and plugged up USB. All I'm getting is an LG Logo. Is that right? On my sgs2, it actually shows that it goes into download mode. Not so on this phone? Also, I'm on windows xp and its not reconizing this device. Ideas? Info? I'd REALLY like to get this device rooted and juiced up. Need to make a point to nay sayer wife
Click to expand...
Click to collapse
to get into download mode yes you must unplug all connected media to the P-999, this includes your microSD and battery, wait 5 - 10 seconds before plugging in the power cord to the computer to ensure no electrical currents are running through the device, hold Vol +/- and plug in the device, WinXP should have a pop-up in the taskbar at this point stating that it's recognized as APX device, once it says that you've entered download mode. The screen should remain to look like it's still off during this process.
If WinXP isn't recognizing the device as APX, then double check to make sure you have extracted the ZIP's respectively, should be NvFlash, and APX. If you've already done that, then go into device manager. Start Menu -> All Programs -> Accessories -> System Tools -> Device Manager.
Within the Device Manager you will notice APX with a yellow question mark next to it, double click on APX in Device Manager and re-install the driver. AFTER you have disconnected your device, then try and enter download mode again.

XxbloodxrushxX said:
to get into download mode yes you must unplug all connected media to the P-999, this includes your microSD and battery, wait 5 - 10 seconds before plugging in the power cord to the computer to ensure no electrical currents are running through the device, hold Vol +/- and plug in the device, WinXP should have a pop-up in the taskbar at this point stating that it's recognized as APX device, once it says that you've entered download mode. The screen should remain to look like it's still off during this process.
If WinXP isn't recognizing the device as APX, then double check to make sure you have extracted the ZIP's respectively, should be NvFlash, and APX. If you've already done that, then go into device manager. Start Menu -> All Programs -> Accessories -> System Tools -> Device Manager.
Within the Device Manager you will notice APX with a yellow question mark next to it, double click on APX in Device Manager and re-install the driver. AFTER you have disconnected your device, then try and enter download mode again.
Click to expand...
Click to collapse
I got no device manager.

Control panel/system/hardware/device manager.

Solution to a common error
TwitchyEye said:
Control panel/system/hardware/device manager.
Click to expand...
Click to collapse
When you're installing the APX driver, if it comes up with an error saying something similiar to "INF is not digitally signed", then you have to disable windows security features in order to install the software.

XxbloodxrushxX said:
When you're installing the APX driver, if it comes up with an error saying something similiar to "INF is not digitally signed", then you have to disable windows security features in order to install the software.
Click to expand...
Click to collapse
I had that exact problem and on windows 8 it was a pain to do. It had to be done from the reboot screen and the first time I did it my computer's screen went black and would not turn on after rebooting for a few hours. Still have no idea why it did that lol. Looks like he's running an earlier version of windows which is better for everything we do here anyway lol

Pain-N-Panic said:
I had that exact problem and on windows 8 it was a pain to do. It had to be done from the reboot screen and the first time I did it my computer's screen went black and would not turn on after rebooting for a few hours. Still have no idea why it did that lol. Looks like he's running an earlier version of windows which is better for everything we do here anyway lol
Click to expand...
Click to collapse
For real bro, my most favored Microsoft OS is WinXP media center edition SP3

Yup, everything was configured for it and worked beautifully
Sent from my LG-P999 using xda premium

[Q] Bricked : Flashing sbl1

I was trying to flash BlissPop. It didn't flash. So, I decided to flash fastboot image of CM11s 44.
I issued this command :
Code:
fastboot flash modem NON-HLOS.bin
fastboot reboot-bootloader
fastboot flash sbl1 sbl1.mbn
fastboot reboot-bootloader
The flash sbl1 command gave an error.
I rebooted bootloader. The phone turned off, but it never turned on.
I don't know how could it brick my phone, because I've done it a few times without any error.
My battery was on 65% when I was doing all this. So, I don't suspect battery has died.
But, I'm charging the phone anyway. There is no lead, but the power bank shows that battery is taking charge.
When I connect the phone to PC, it shows no signs of any device connected. Device manager doesn't show any thing/any refresh.
I've tried to push the power button for about a minute for 5 times, as 1+1 site says.
I've tried vol up + power and vol down + power buttons. It doesn't boot it.
I've no access to fastboot, recovery, OS, anything.
Please, suggest me solutions.

Did you flash the firmware updates before you flashed bliss? There is a toolkit out there, linked in bliss thread, on how to unbrick. I'll see if I can't find it.
Sent from my A0001 using Tapatalk
---------- Post added at 11:49 PM ---------- Previous post was at 11:45 PM ----------
http://forum.xda-developers.com/showthread.php?p=58230647
First look at this perhaps. If not there is a toolkit out there to flash back to stock. Should be able to communicate w the phone if it can turn on at all.
Sent from my A0001 using Tapatalk

http://forum.xda-developers.com/showthread.php?p=58230647
First look at this perhaps. If not there is a toolkit out there to flash back to stock. Should be able to communicate w the phone if it can turn on at all.
Click to expand...
Click to collapse
Thanks. I looked at it.
But, as you said I can't do anything till the phone turns on even once.
BTW, I highly suspect battery drain, because I was in TWRP for long to take backup, flashing MultiROM, etc. TWRP is known to not allow charging, as reported by some people.
Can you tell me whether flashing sbl1 could have bricked it or not? It didn't fail to flash in past and it never caused problem.
I had flashed CM12 firmware update before flashing BlissPop. Could reflashing CM11s fastboot image over it cause problem. I think it should not, because fastboot image replace all things. What's your opinion?

Had the same problem. Try first leave it charging for 12 hours after that plug it in. Then get into fastboot this is not easy. Just hold vol up and power together for atv least 5 Sec.
Sent from my A0001 using XDA Free mobile app

I guess its possible. But I would do what falastine said. Charge it for some time. With a soft brick it may not show anything on the screen but could actually be on. So be patient trying to get the toolkit to find the phone. I've heard in another thread someone's phone did in fact connect but nothing was on the screen
Sent from my A0001 using Tapatalk

any progress on this? i think the exact same thing happened to me. was trying to flash back to CM11s using fastboot, but it died. now i dont get anything at all. no response to the chrager, or the computer or anything.
ive tried holding the power button, holding the vol keys with the pwr button, but no avail.
let me know if you figured it out!

Falastine said:
Had the same problem. Try first leave it charging for 12 hours after that plug it in. Then get into fastboot this is not easy. Just hold vol up and power together for atv least 5 Sec.
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
I left the phone in charge for 24 hours using original charger and wire.
Tried long presses for multiple times - nothing happens.
Tried vol up/ vol down combinations with power button for long nothing happens.
I am now waiting for 12 hours and then will plug it again, as some thread said.
In between I'm trying to download a tool from here : http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
I hope it detects my phone.

hassan3216 said:
any progress on this? i think the exact same thing happened to me. was trying to flash back to CM11s using fastboot, but it died. now i dont get anything at all. no response to the chrager, or the computer or anything.
ive tried holding the power button, holding the vol keys with the pwr button, but no avail.
let me know if you figured it out!
Click to expand...
Click to collapse
There is no progress.
It appears that we are in same situation.
I highly suspect dead battery, instead of dead phone. Anyway, I'll post updates.
Please, share if anything works for you.

I had the same problem and had to restore the phone with this tool:
https://forums.oneplus.net/threads/...ol-restore-stock-cm11s-fix-bricks-etc.237827/
I had many problems with the drivers and i had tot install the qualcom drivers http://sciencespaces.com/search/Qualcomm+HS-USB+Android+DIAG+9018/
The topic said that there is an issue with the modem and you have tot flash it manually but i don't have problems so far.

michaeldepotter said:
I had the same problem and had to restore the phone with this tool:
https://forums.oneplus.net/threads/...ol-restore-stock-cm11s-fix-bricks-etc.237827/
I had many problems with the drivers and i had tot install the qualcom drivers http://sciencespaces.com/search/Qualcomm+HS-USB+Android+DIAG+9018/
The topic said that there is an issue with the modem and you have tot flash it manually but i don't have problems so far.
Click to expand...
Click to collapse
@michaeldepotter
Thanks for writing here.
I'm following the thread mentioned by you.
But, the problem is that I don't know how to get the phone in Qualacom mode.
I don't whether my phone is on or off. So, I've tried to connect it with PC and pressing key mentioned in the thread. It didn't work.
If you could share your experience with me, it will be kind of you.
I've windows 8.1 64 bit.

I'm at work now but in a couple of hours i can give you more info how i did it
Sent from my A0001 using XDA Free mobile app

michaeldepotter said:
I'm at work now but in a couple of hours i can give you more info how i did it
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
@michaeldepotter,
Sure, no problem.
I'll be eagerly waiting.

mahastat said:
@michaeldepotter
Thanks for writing here.
I'm following the thread mentioned by you.
But, the problem is that I don't know how to get the phone in Qualacom mode.
I don't whether my phone is on or off. So, I've tried to connect it with PC and pressing key mentioned in the thread. It didn't work.
If you could share your experience with me, it will be kind of you.
I've windows 8.1 64 bit.
Click to expand...
Click to collapse
open your device manager in your pc and use volume up and power button while connected to pc to get into qualcom mode.most probably it would be detected as android fastboot interface just click on it and update the driver to qualcom usb serial interface then use http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851 this tool to recover

wilbur2brooks said:
open your device manager in your pc and use volume up and power button while connected to pc to get into qualcom mode.most probably it would be detected as android fastboot interface just click on it and update the driver to qualcom usb serial interface then use http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851 this tool to recover
Click to expand...
Click to collapse
@wilbur2brooks
Thanks for writing.
I could understand that once my phone is detected as even unknown device, I can install drivers and try to recover through the tool you mentioned.
But, the problem is that my phone is not recognized as anything. The Device Manager shows no reaction when I connect the phone to computer.
I have disabled driver signature on my Windows 8.1 64 bit. I've Qualacom drivers installed. Rebooted computer in disabled signature mode.
I've connected my device through official cable and I've tried the key combination mentioned.
My other devices show up when connected to PC, but 1+1 doesn't.
Any other thing which I could try.
I had left my phone in charging for 24 hours, but it doesn't wake it up.
Any suggestion is appreciated.

mahastat said:
@michaeldepotter
Thanks for writing here.
I'm following the thread mentioned by you.
But, the problem is that I don't know how to get the phone in Qualacom mode.
I don't whether my phone is on or off. So, I've tried to connect it with PC and pressing key mentioned in the thread. It didn't work.
If you could share your experience with me, it will be kind of you.
I have windows 8.1 64 bit.
Click to expand...
Click to collapse
So this is how i did it.
1. install the drivers from OPO (located in the .zip file from this tool https://forums.oneplus.net/threads/t...ks-etc.237827/ )
2. Open your device manager (Start - right click on computer - properties - devices manager)
3. Press on power + vol up for like 10 sec until you see a device showing up (called QHSUSB_BULK)
4. Download the qualcomdriver ( https://www.dropbox.com/s/vgujdut93m341qm/Qualcomm 2012.rar?dl=0 ). Right click on this devices and click on "Update Driver Software" -> "Browse my computer for driver software" -> locate the Qualcomm 2012\fre\Windows7 8 or vista folder depending on your setup. Update the driver.
5. Now the OPO tool should recognize your device. I turn off all my network connections so the usb device can't find other drivers. (in case windows overwrite the driver).
---------- Post added at 07:29 PM ---------- Previous post was at 07:07 PM ----------
Have you tried another PC?
Sent from my A0001 using XDA Free mobile app

michaeldepotter said:
So this is how i did it.
1. install the drivers from OPO (located in the .zip file from this tool https://forums.oneplus.net/threads/t...ks-etc.237827/ )
2. Open your device manager (Start - right click on computer - properties - devices manager)
3. Press on power + vol up for like 10 sec until you see a device showing up (called QHSUSB_BULK)
4. Download the qualcomdriver ( https://www.dropbox.com/s/vgujdut93m341qm/Qualcomm 2012.rar?dl=0 ). Right click on this devices and click on "Update Driver Software" -> "Browse my computer for driver software" -> locate the Qualcomm 2012\fre\Windows7 8 or vista folder depending on your setup. Update the driver.
5. Now the OPO tool should recognize your device. I turn off all my network connections so the usb device can't find other drivers. (in case windows overwrite the driver).
---------- Post added at 07:29 PM ---------- Previous post was at 07:07 PM ----------
Have you tried another PC?Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
The hard part is that I could not get the phone detected by PC as anything.
I followed the same key combination which you mentioned. It doesn't help.
Can you tell me if battery is totally depleted, will it be possible for phone to be detected?
I've tried to charge my phone with various chargers and power banks. The battery stays cold, the charger stays cold, power bank blinks and get depleted, but phone is not vibrating even on long press.
I've tried on virtual PC, a XP machine. And on other real XP PC.
Thanks for your help.
If you have some more suggestions based on information given by me, kindly post it again.

mahastat said:
@wilbur2brooks
Thanks for writing.
I could understand that once my phone is detected as even unknown device, I can install drivers and try to recover through the tool you mentioned.
But, the problem is that my phone is not recognized as anything. The Device Manager shows no reaction when I connect the phone to computer.
I have disabled driver signature on my Windows 8.1 64 bit. I've Qualacom drivers installed. Rebooted computer in disabled signature mode.
I've connected my device through official cable and I've tried the key combination mentioned.
My other devices show up when connected to PC, but 1+1 doesn't.
Any other thing which I could try.
I had left my phone in charging for 24 hours, but it doesn't wake it up.
Any suggestion is appreciated.
Click to expand...
Click to collapse
Even if your battery is depleted it should get detected in your machine when u press volume up and power while its connected to your pc.hold it for a minute this combination should show something also keep your pc volume up to hear any port connect discconect sounds.If this doesnt happen then your hardware is dead no other option but try to give it to opo for service.

So, nothing ever comes on the screen? Does the phone vibrate if you hold the power button for 20 seconds? If so, this might be of help, if it sounds like it's bricked: http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732

wilbur2brooks said:
Even if your battery is depleted it should get detected in your machine when u press volume up and power while its connected to your pc.hold it for a minute this combination should show something also keep your pc volume up to hear any port connect discconect sounds.If this doesnt happen then your hardware is dead no other option but try to give it to opo for service.
Click to expand...
Click to collapse
I've PC volume UP, device manager in front and phone connect. Key combination brings nothing.
So, I think I'll take it to OPO Service Center now.
Thanks for helping me.
netbuzz said:
So, nothing ever comes on the screen? Does the phone vibrate if you hold the power button for 20 seconds? If so, this might be of help, if it sounds like it's bricked: http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
Nothing comes on screen, no vibrations. It's bricked.
Going to OPO Service Center.
Thanks for looking after my problem.
I appreciate all who took part in this thread to help me. Thanks.
Moderators may close this thread now.

Unbrick tool for OnePlus 7 (MSMTOOL Hydrogen Version)

After using this tool you will have the chinese rom installed. (H2OS = Hydrogen OS)
Instructions how to use can be found: HERE
There is only one difference. To boot into Qualcomm download mode you need to press Volume up + Volume down when phone is powered off.
There is also a guide on YouTube. --> LINK
You can easily go to OxygenOS with official Updater app.
Just download OxygenOS OTA.zip and choose it with updater.
After reboot i personally would factory reset the phone.
Downloadlink MSMTOOL:
MEGA
Thread for OTA.zip:
Oneplus 7 Repo Oxygen OS builds
Feel free to report about your experience!
Thanks:
@Titokhan - for the Update.zip files
@Thyson - for testing the MSM Tool and reporting
@jmax91 - for the tip (tool)
@LloydSmallwood - for the unbrick guide

Finally MsmDownloadTools for our OnePlus 7. Has anyone tried it yet?

Confirmed, an XDA partner has already used it and revived his OnePlus 7 !!!
Link from partner's message:
https://forum.xda-developers.com/showpost.php?p=79989363&postcount=32

Kollachi said:
After using this tool you will have the chinese rom installed. (H2OS = Hydrogen OS)
You can easily go to OxygenOS with official Updater app.
Just download OxygenOS OTA.zip and choose it with updater.
After reboot i personally would factory reset the phone.
Downloadlink MSMTOOL:
MEGA
Thread for OTA.zip:
Oneplus 7 Repo Oxygen OS builds
Note: I didnt test it! @Thyson tried it and reported its working. Feel free to report guys.
Thanks:
@Titokhan - for the Update.zip files
@Thyson - for testing the MSM Tool and reporting
@jmax91 - for the tip (Tool)
Click to expand...
Click to collapse
Hello friend, add to your thread the steps that mark the original link of this MsMDownloadTool:
Link: https://repairmymobile.in/flash/oneplus-7-flash-file/amp/
How to Flash OnePlus 7:
1- Install Qualcomm Driver.
2- Make sure your device getting identified in device manager as Qualcomm HS-USB Diagnostic 9008.
3- Use both Volume as boot key.
4- Run MSM Download tool.
5- Click on verify, if it display message ok then you are ready to go.
6- Click on start to Flash.
7- Download Progress will be displayed.
8- When completed, Download complete will be displayed.

tURkOsANsE said:
1- Install Qualcomm Driver.
2- Make sure your device getting identified in device manager as Qualcomm HS-USB Diagnostic 9008.
3- Use both Volume as boot key.
4- Run MSM Download tool.
5- Click on verify, if it display message ok then you are ready to go.
6- Click on start to Flash.
7- Download Progress will be displayed.
8- When completed, Download complete will be displayed.
Click to expand...
Click to collapse
I think the steps should be clear. It's always the same since OnePlus 3/T. There is only one little different thing.

Kollachi said:
I think the steps should be clear. It's always the same since OnePlus 3/T. There is only one little different thing.
Click to expand...
Click to collapse
Hi friend, what is that different thing you say? Some is the first time we have a OnePlus, so we do not know.
Another question I have is that my OnePlus 7 works fine, but I wanted to see if this program recognizes me my OnePlus in case I ever need it, how can I enter the necessary mode to be detected by this program?
I press volume up and volume down and then I connect the cable, at that moment the program makes me "connected" (see attached image, left side), but after a few seconds it appears that "disconnected" and the phone restarts and OSS starts .
When I connect it, the images "Qualcomm HS-USB QDLoader 9008 (COM3) appear in the device manager.
I do not understand why my mobile when I connect it by pressing the volume buttons and without touching anything of the program it appears that connected and after a few seconds it disconnects itself and OOS restarts.
Regards, and thank you very much.

tURkOsANsE said:
Hi friend, what is that different thing you say? Some is the first time we have a OnePlus, so we do not know.
Another question I have is that my OnePlus 7 works fine, but I wanted to see if this program recognizes me my OnePlus in case I ever need it, how can I enter the necessary mode to be detected by this program?
I press volume up and volume down and then I connect the cable, at that moment the program makes me "connected" (see attached image, left side), but after a few seconds it appears that "disconnected" and the phone restarts and OSS starts .
When I connect it, the images "Qualcomm HS-USB QDLoader 9008 (COM3) appear in the device manager.
I do not understand why my mobile when I connect it by pressing the volume buttons and without touching anything of the program it appears that connected and after a few seconds it disconnects itself and OOS restarts.
Regards, and thank you very much.
Click to expand...
Click to collapse
The different part is you need to press volume up and volume down. With the older phones there was only one button. Don't remember volume up or down.
Not sure why your phone disconnecting automatically.

Kollachi said:
The different part is you need to press volume up and volume down. With the older phones there was only one button. Don't remember volume up or down.
Not sure why your phone disconnecting automatically.
Click to expand...
Click to collapse
Hi friend, could you try if the same thing happens to you?

Made the mistake of locking my bootloader directly and bricked the hell out of my standard 7. I kept getting "Your device is corrupt and it can't be trusted". No Recovery accessible, only bootloader.
Followed the steps here and everything is back to normal now!

GoToNap said:
Made the mistake of locking my bootloader directly and bricked the hell out of my standard 7. I kept getting "Your device is corrupt and it can't be trusted". No Recovery accessible, only bootloader.
Followed the steps here and everything is back to normal now!
Click to expand...
Click to collapse
Hello friend, could you help me to know why when I connect my device appears as connected and after 10 seconds it automatically restarts the OOS operating system? My phone works well, it's just a test to know if one day I have a brick to know that this program works in my case.
I would need (now that your device works, like mine) to start in a way that the program detects and looks "connected", then wait a moment and without pressing any button on the program or phone to see if it restarts alone. I am thinking that if the phone works well, the program when connected only starts the system automatically.
Read some messages above in case I have not explained myself well.
Could someone who has a good phone confirm this? Can the program attempt to automatically restart the device if the "Start" button of MsmDownloadTool is not pressed within 10 seconds?
Thanks greetings.

tURkOsANsE said:
Hi friend, could you try if the same thing happens to you?
Click to expand...
Click to collapse
Yep, same here. Maybe it's because device isn't bricked. I'm not sure about that. Never tried MSMTool when my device wasn't bricked.

Kollachi said:
Yep, same here. Maybe it's because device isn't bricked. I'm not sure about that. Never tried MSMTool when my device wasn't bricked.
Click to expand...
Click to collapse
hello, thanks for trying it, then that happens, if it is not locked it restarts, or maybe the EDL mode restarts for security if you don't press Start on the Msm tool.
---------- Post added at 12:20 PM ---------- Previous post was at 12:10 PM ----------
Indeed we have already resolved the doubt about why EDL mode is disconnected after 10 seconds. It is a security system, you have 10 seconds to press Start. here another partner who has tried it and that happened to him, until he hit start and flashed everything well.
Comrade comment: https://forum.xda-developers.com/showpost.php?p=79997414&postcount=54

tURkOsANsE said:
Hello friend, could you help me to know why when I connect my device appears as connected and after 10 seconds it automatically restarts the OOS operating system? My phone works well, it's just a test to know if one day I have a brick to know that this program works in my case.
I would need (now that your device works, like mine) to start in a way that the program detects and looks "connected", then wait a moment and without pressing any button on the program or phone to see if it restarts alone. I am thinking that if the phone works well, the program when connected only starts the system automatically.
Read some messages above in case I have not explained myself well.
Could someone who has a good phone confirm this? Can the program attempt to automatically restart the device if the "Start" button of MsmDownloadTool is not pressed within 10 seconds?
Thanks greetings.
Click to expand...
Click to collapse
I see that you sent a private message to me also and mentioned that you got into the Bootloader. That is not what you need.
First of all, you will need to install the qualcom drivers from here: https://www.androidjungles.com/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows/
Afterwards, you will need to hold both volume buttons, and after a few seconds connect your phone to the computer via cable (while still holding the volume buttons).
The phone will be detected as a Qualcom device and you cand start following the tutorial that was provided earlier.

GoToNap said:
I see that you sent a private message to me also and mentioned that you got into the Bootloader. That is not what you need.
First of all, you will need to install the qualcom drivers from here: https://www.androidjungles.com/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows/
Afterwards, you will need to hold both volume buttons, and after a few seconds connect your phone to the computer via cable (while still holding the volume buttons).
The phone will be detected as a Qualcom device and you cand start following the tutorial that was provided earlier.
Click to expand...
Click to collapse
Hello friend, I already managed to enter the EDL mode correctly, the doubt is that when I connected it after 10 seconds, the phone disconnected and relapsed. That's why I said that if I could test now that your phone works, it also automatically restarts without touching any Msm program button once connected in EDL mode.

Something with EDL mode in OP7 is currently wrong.
As the predecessors wrote, after connecting, it is interrupted after a few seconds and the phone reboots.
I also have OP3, OP6 in them after the EDL mode is switched on the connection is maintained all the time.

Andro_Nicus said:
Something with EDL mode in OP7 is currently wrong.
As the predecessors wrote, after connecting, it is interrupted after a few seconds and the phone reboots.
I also have OP3, OP6 in them after the EDL mode is switched on the connection is maintained all the time.
Click to expand...
Click to collapse
That's what @Thelargeportion wrote at OP7Pro thread:
"Yes, it did on mine. I've just used this tool to recover from root to stock.
Noted that if the program isn't started within 10 seconds, the phone rebooted automatically, I'm guessing as some sort of security lock. Restarted in EDL, connected to the MSMDownloadtool and executed the program as soon as it was connected and it flashed absolutely fine.
Note that after the phone is restarted after a successful flash, it takes about 1-2 minutes to boot again having stuck on the OnePlus boot logo."
Could be true. But nevermind... It works and that's important.:laugh:

Yes, it is the most important thing that it flashes the system image.
However, it does not maintain a permanent session in EDL as
in previous OnePlus models, and that may be worrying.

Andro_Nicus said:
Yes, it is the most important thing that it flashes the system image.
However, it does not maintain a permanent session in EDL as
in previous OnePlus models, and that may be worrying.
Click to expand...
Click to collapse
I can Tell you, after days with a bricked Phone and seeking for a Tool. You really don't Care about permanent Sessions.
Regrads
Thyson

If something works differently, it usually is always puzzling.
That is why all these posts appeared on this subject.

Andro_Nicus said:
If something works differently, it usually is always puzzling.
That is why all these posts appeared on this subject.
Click to expand...
Click to collapse
Hello friend, yes, that happens to all of us, it is not an isolated case, but if once you enter EDL mode and connect the phone to the PC and it appears "connected", you press start and everything works. You must press start in 10 seconds since entering EDL mode, once you press start, it no longer restarts and blinks correctly.
This of the 10 seconds occurs in all OnePlus 7 series (normal and PRO).
Comment where I ask about 10 seconds and colleagues confirm that they used the tool: https://forum.xda-developers.com/showpost.php?p=79997414&postcount=54

Pixel 2 brick after Uninstall Magisk

Hello,
My Pixel 2 was unlocked bootloader and Rooted.
I went to Magisk app then pressed Uninstall All, then my phone rebooted and brick at boot (Screenshot "No command").
I tried to flash back to stock rom but computer cannot reconize the phone. (I supposed USB debugging was not turned on yet).
Please advise how I can make my Pixel 2 back to work?
Many thanks in advance.

thieuvn said:
Hello,
My Pixel 2 was unlocked bootloader and Rooted.
I went to Magisk app then pressed Uninstall All, then my phone rebooted and brick at boot (Screenshot "No command").
I tried to flash back to stock rom but computer cannot reconize the phone. (I supposed USB debugging was not turned on yet).
Please advise how I can make my Pixel 2 back to work?
Many thanks in advance.
Click to expand...
Click to collapse
Anyone can help?

thieuvn said:
Anyone can help?
Click to expand...
Click to collapse
Hi! Can you see your Pixel in device manager when you connect it to PC?

somin.n said:
Hi! Can you see your Pixel in device manager when you connect it to PC?
Click to expand...
Click to collapse
I cannot see it.
Nothing happen when I plug the phone in.

thieuvn said:
I cannot see it.
Nothing happen when I plug the phone in.
Click to expand...
Click to collapse
Try to power off the phone and than hold power button until phone will vibrate and try again connect to pc ...

somin.n said:
Try to power off the phone and than hold power button until phone will vibrate and try again connect to pc ...
Click to expand...
Click to collapse
Thanks. I will try one more time

somin.n said:
Try to power off the phone and than hold power button until phone will vibrate and try again connect to pc ...
Click to expand...
Click to collapse
Still cannot connect my phone with the PC.
Tried 03 different PCs already.

thieuvn said:
Still cannot connect my phone with the PC.
Tried 03 different PCs already.
Click to expand...
Click to collapse
Do you have google usb drivers on your PC?
Code:
[url]https://developer.android.com/studio/run/win-usb[/url]

somin.n said:
Do you have google usb drivers on your PC?
Click to expand...
Click to collapse
Yes I had it all.
But still cannot connect, I tried All in one tool, 15s ADB , and all cannot reconize phone

thieuvn said:
Yes I had it all.
But still cannot connect, I tried All in one tool, 15s ADB , and all cannot reconize phone
Click to expand...
Click to collapse
And do you use original usb-c cable?

somin.n said:
And do you use original usb-c cable?
Click to expand...
Click to collapse
Yes i do.
The ADB driver keeps not working is the main problem.

thieuvn said:
Yes i do.
The ADB driver keeps not working is the main problem.
Click to expand...
Click to collapse
It is really weird :/ I tried to boot to bootloader with usb debuging off and still my PC correctly recognize my phone. Just last idea, try to boot to bootloader with key combination (power of phone and hold Power + vol down)...
Here is the version of usb driver which I have ...

somin.n said:
It is really weird :/ I tried to boot to bootloader with usb debuging off and still my PC correctly recognize my phone. Just last idea, try to boot to bootloader with key combination (power of phone and hold Power + vol down)...
Here is the version of usb driver which I have ...
Click to expand...
Click to collapse
Thank you.
Let me buy another cable then try again...

Download and extract the latest version of Platform Tools to a folder, then run all ADB and fastboot commands in command prompt or powershell within that folder. Don't rely on Windows drivers for ADB.

DuckRuckus said:
Download and extract the latest version of Platform Tools to a folder, then run all ADB and fastboot commands in command prompt or powershell within that folder. Don't rely on Windows drivers for ADB.
Click to expand...
Click to collapse
I already did it but no respond so far

thieuvn said:
I already did it but no respond so far
Click to expand...
Click to collapse
Forget about ADB, you need Fastboot access. While in the bootloader interface, connect your phone, look for it in the Device Manager and change its driver to Android Bootloader Interface, or something of the sort. Next try "fastboot devices" on the command line, see if it detects your device.

I brought my phone to repair shop and they detected that the hard disk was dead.
Just bought another Pixel 2 to have more awesome photos

You have no fastboot I guess.
Boot into fastboot, plug in the usb cable and press and hold the volume down button for like 15 seconds, and then it will be recognized by the PC. You can flash back the stock rom after that.

Hey I had the same problem. Just stuck in bootloader mode. In my case, the boot slot changed itself from b to a (access denied, same as your problem). What I did:
1. I boot my phone, then it'll be in bootloader mode (same as the first picture when it says 'operation denied')
2. I kept pressing the power button, then my phone boot into bootloader again (bootloop). I kept holding my power button until my phone boot into right boot slot. (It took me 10 bootloop to boot into right boot slot, I just keep holding my power button when in the bootloader mode)
You can add my telegram : (@)Djkuns if you're confused. Hope I can help! Goodluck!

(Solved) Oneplus 8T Qualcomm logo blinking

Hi!
I have tried to install a custom rom, but there was an error. When I tried to boot back to bootloader mode, the qualcomm logo started blinking and the device is vibrating.
Tried to connect to pc, but I don't see any device in COM Ports in the device manager, also MSM tools says waiting for the device.
If I connect the cable while I am pressing the both volume button, I hear the sound from the pc that something is connected, but after a few seconds the device disconnects.
Can you help me?

Got the same problem installing a wrong firmware, probably. I'm hoping for someone knowing how to solve...

That was easy. Unfortunately I had to format the phone entirely (MSMTool), but it's back with the living.
Install Qualcomm EDL drivers
Download an MSMTool release for OnePlus 8T
Enter in EDL Mode. With the phone connected to a computer running Windows, press volUp + volDown right when you see the Snapdragon logo. The phone will stay with screen off
Follow the usual flashing procedure with MSMTool

Thanks, I just had to install the Qualcomm drivers exe file. After that it appeared in device manager.

Livingsilver94 said:
3. Enter in EDL Mode. With the phone connected to a computer running Windows, press volUp + volDown right when you see the Snapdragon logo. The phone will stay with screen off
Click to expand...
Click to collapse
Nothing happens when i press that. phone keeps on vibrating and flashing the logo
UPDATE: Got a different computer and it worked