{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BETA BUILD
H830: https://drive.google.com/file/d/1iLHhRHiHh50tc0HuSdgVvPzhIvedEQt7/view?usp=sharing
H850: https://drive.google.com/file/d/1RJPml0ehPBkqdR8oyK6PiYQD0kB3AkHx/view?usp=sharing
RS988: https://drive.google.com/file/d/1p3KpKtE6DyGnD3o8OJiJkD6gctTqH4O2/view?usp=sharing
DISCLAIMER:
I am not responsible for any damage done to your device.
ALL credit for this Rom goes to @x86cpu for his amazing work for LG msm8996 devices:good:
Also a huge thanks to @Arda Süzen for this orange fox recovery build for the ALL the g5 variants and his Audio Fix.
Once @x86cpu releases his Lineage 17.0 rom for the g5 I'll quit working on this thread and move to a new Rom like RR, AOKP, Cr Droid, etc
Note: this rom doesn't have gapps yet I'll add that later Use BitGapps, NikGapps, or OpenGapps 10 Beta
Installation
Wipe system, data, cache, Dalvik/ ART cache
flash rom
Flash this for audio fix (there is a second file in that folder that has the dual speaker mod included, it uses your earpiece as a second speaker) This is now included in the ROM
reboot
I have not tested upgrading from lineage 16 so try at your own risk
Upgrade is working
Sources:
https://github.com/LineageOS
https://github.com/LineageOS/android_kernel_lge_msm8996
https://github.com/LineageOS/android...msm8996-common
https://github.com/LineageOS/android..._lge_g5-common
https://review.lineageos.org/q/owner:eric%40meddaughs.com <--- x86cpu's repopicks
Issues
WORKING:
WiFi
Camera
GPS
NFC
2.4 Ghz Hotspot
USB OTG
NOT WORKING:
Bluetooth headphones/speakers
Usb-c headphones Fixed with this Now included in the ROM
VoLTE and WiFi calling (will most likely never work)
5.0 Ghz Hotspot
Encrpytion
Fails Magisk SafteyNet
SELinux is permissive
Let me know of any other issues
Change Log:
1-11-20:
January Security Patch
Audio Fix is now included in the ROM
Latest Repopicks from @x86cpu
12-19-19:
Initial Release
@ROMSG thanks . I think don't include gapps in room. We flash it, and we can always flash "fresh" gapps and magisk . Better include latest version k-lapse and k-cal in kernel if You can [emoji106] . I wait for H850 version [emoji6]
Wysłane z mojego LG-H850 przy użyciu Tapatalka
LineageOS 17.0 ROM is based on Android 10.0 Q, isn't it?
Kasimpasali1921 said:
LineageOS 17.0 ROM is based on Android 10.0 Q, isn't it?
Click to expand...
Click to collapse
Yes it is
Kasimpasali1921 said:
LineageOS 17.0 ROM is based on Android 10.0 Q, isn't it?
Click to expand...
Click to collapse
Absolutely right
Thank you for builds. I waiting h850 builds. I think you should not add the gapps into rom becouse everyone use another gapps package (bitgapps, nikgapps or opengapps). And i love the see havoc os 3.0 rom for g5 because more optimized, more customazitons rom.
I'm eagerly waiting for the H850 version. This is my last OT post but I think people should know about this.
This is a post on Reddit about the 4000 mAh battery cell upgrades for the G5. My phone battery was on its last legs and I wanted to replace the phone, but I did this mod instead and I'm keeping it for longer. Thought you might want to know.
totalnoob34 said:
I'm eagerly waiting for the H850 version. This is my last OT post but I think people should know about this.
This is a post on Reddit about the 4000 mAh battery cell upgrades for the G5. My phone battery was on its last legs and I wanted to replace the phone, but I did this mod instead and I'm keeping it for longer. Thought you might want to know.
Click to expand...
Click to collapse
I see your post and try later this mod on s7e nohon battery.
Arda Süzen said:
I see your post and try later this mod on s7e nohon battery.
Click to expand...
Click to collapse
I'm glad some people are trying, let me know how it goes and post some pictures of the process, mine were kinda janky. I posted in the Acessories section with more pictures.
I would love it so much if this could be brought to the LG G5 SE (H840). I would be willing to test as much as needed.
Thank you for all your work.
Arda Süzen said:
Thank you for builds. I waiting H850 builds. I think you should not add the gapps into rom becouse everyone use another gapps package (bitgapps, nikgapps or opengapps). And i love the see Havoc OS 3.0 Q rom for LG G5 because more optimized, more customazitons rom.
Click to expand...
Click to collapse
Thanks for the ROM @ROMSG. Would also like to see Havoc 3.0 for our G5
Thank You
God be with you all
LollipopLover said:
I would love it so much if this could be brought to the LG G5 SE (H840). I would be willing to test as much as needed.
Thank you for all your work.
Click to expand...
Click to collapse
I am definitely interested in building for the g5 se I'll see what I can do
Gold_Phenix said:
@ROMSG thanks . I think don't include gapps in room. We flash it, and we can always flash "fresh" gapps and magisk . Better include latest version k-lapse and k-cal in kernel if You can [emoji106] . I wait for H850 version [emoji6]
Wysłane z mojego LG-H850 przy użyciu Tapatalka
Click to expand...
Click to collapse
Kcal should be in the kernal
where could one get the Gapps 10?
Dlions said:
where could one get the Gapps 10?
Click to expand...
Click to collapse
You could use bitgapps
Installed on my H830 so far running smooth ...10 is pretty cool!
Thanks to all involved in this. Looking forward to the RS988 build.
ROMSG said:
I am definitely interested in building for the g5 se I'll see what I can do
Click to expand...
Click to collapse
I'd love to learn how to do this if you've got any reading material, and want a tester? I think this would be a great learning experience.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[CENTER][COLOR="red"]** Disclaimer **[/COLOR]
Your warranty is now void. No one is responsible for any damaging of your device or termination because of this rom.
If you decide to flash this ROM, you are getting responsible yourself.
Have a functioning Nandroid in case something goes wrong.[/CENTER]
Backdrop:
As Cristiano Matos (g+) decided to drop official support for the Moto G, Benowit Niarg (g+) decided to build from source.
Not working:
Same as cm12, I think.
Rom features:
########
Screenshots:
http://crdroid.org/?page_id=472
crDroid Community:
https://plus.google.com/communities/118297646046960923906
crDroid official website:
http://crdroid.org/
First time installing crDroid, or coming from another ROM:
Place rom and gapps on storage
Reboot to recovery
Wipe data, dalvik, cache, and format system
Flash crDroid.zip
Flah Gapps.zip
Reboot
Upgrading from earlier version of crDroid:
Copy crDroid.zip to your internal SDCard
Boot into Recovery
Flash crDroid.zip
Reboot
Download crDroid:
crDroid-falcon (AndroidFileHost)
crdroid-5.1.1-20150601-falcon.zip (mediafire)
crdroid-5.1.1-20150527-falcon.zip (mediafire)
crdroid-5.0.2-20150321-falcon.zip (mediafire)
Download Gapps:
Slim GApps 5.1
(My favorite Gapps. Any other will work, too.)
Created 2014.12.13
Last Updated 2015.06.01
Paypal donation for crDroid
Paypal link
This is tested ONLY on XT1032
Sources:
crDroid
msm8226-common
Device tree
Special thanks to:
Cristiano Matos
David Viteri
intervigilium
KonstaT
And all developer of CyanogenMod :highfive:
As reported in G+ by me, Continuous systemui fc's on xt1033.
But the sim is detected but no signal. Tried manually searching it searches but cannot subscribe to any network.
For gapps i flashed the one provided by @SeannyM from here.
Going to try now
i see shortcut of apps on lockscreen in the ss, but its not present in the rom why?
After i flash the rom it booted with screen flickering (because i have upgraded to GPE 5.0.1) and i got systemui crash, then i have flash pink kernel and no more systemui crash. The rom is smooth and everything is working fine except Cm12 bugs. Thanks:good:
was waiting for this ROM
Sent from my Moto G using Forum Fiend v1.2.14.
Great ROM
This ROM works flawlessly. Very smooth and stable. I haven't found any defficiences. Great job. Keep up.
Does this rom have working ambient display?
DeHuMaNiZeD said:
Does this rom have working ambient display?
Click to expand...
Click to collapse
no.
is there any (lollipop)rom, that already has working ambient display?
PeterImmel said:
no.
is there any (lollipop)rom, that already has working ambient display?
Click to expand...
Click to collapse
Alberto's build
bharat_goku said:
Alberto's build
Click to expand...
Click to collapse
Are you shure it's working? It is implemented,but i don't think it's working.. In GPe stock ROM it works pretty good,but i think that proximity sensor could be a bit more sensitive tho..
DeHuMaNiZeD said:
Are you shure it's working? It is implemented,but i don't think it's working.. In GPe stock ROM it works pretty good,but i think that proximity sensor could be a bit more sensitive tho..
Click to expand...
Click to collapse
I remember it seemed to work fine when i added to my device tree and made my own builds probably needs to be updated based on latest findings..
bharat_goku said:
I remember it seemed to work fine when i added to my device tree and made my own builds probably needs to be updated based on latest findings..
Click to expand...
Click to collapse
Well you should add them in your builds,can you? Because i use the GPe 5.0.1 just because of ambient display,if it worked on Cyanogenmod or any custom ROM,i'd probably use it. And i just bought a case for my phone,wich covers the screen,and when i get a notification i just open it and its there. So please can you implement it in your builds? Ill use them daily if it will work!
DeHuMaNiZeD said:
Well you should add them in your builds,can you? Because i use the GPe 5.0.1 just because of ambient display,if it worked on Cyanogenmod or any custom ROM,i'd probably use it. And i just bought a case for my phone,wich covers the screen,and when i get a notification i just open it and its there. So please can you implement it in your builds? Ill use them daily if it will work!
Click to expand...
Click to collapse
Ah shall over time my priority is getting cm12 working on all models
bharat_goku said:
Ah shall over time my priority is getting cm12 working on all models
Click to expand...
Click to collapse
Well for CDMA you wont get noting without the offical CM release or the Stock Lollipop release. And for dual sim,well you could always try msim and umtds patches from cm11,they should be the same,because unoffical cm12 and cm11 use the same modem,eg. Cyanogenmod never changes the modem. So you could try that.
DeHuMaNiZeD said:
Well for CDMA you wont get noting without the offical CM release or the Stock Lollipop release. And for dual sim,well you could always try msim and umtds patches from cm11,they should be the same,because unoffical cm12 and cm11 use the same modem,eg. Cyanogenmod never changes the modem. So you could try that.
Click to expand...
Click to collapse
I wish that were true cdma seems to be getting closer to fixes than dual sim,my thread has more happy CDMA users than dual thing is lollipop supports dual by default and there are too many changes to understand to find a fix for dual,check out my thread in general ull get an idea
New build is up !
crdroid-5.0.1-20141219-falcon.zip
md5sum:3a3171062e659a67d38458684b4d4b11
Amazing, keeping better
Benowit said:
New build is up !
crdroid-5.0.1-20141219-falcon.zip
md5sum:3a3171062e659a67d38458684b4d4b11
Click to expand...
Click to collapse
I had Ram problems on 12/13 release, this seems to have worked out that bugs, pretty solid and super smooth.
Benowit said:
New build is up !
crdroid-5.0.1-20141219-falcon.zip
md5sum:3a3171062e659a67d38458684b4d4b11
Click to expand...
Click to collapse
I don't understand why people are giving not much attention to these awesome roms and so much attention to stock update, these roms are so freaking amazing, Thanks OP and cr-droid team
Benowit said:
New build is up !
crdroid-5.0.1-20141219-falcon.zip
md5sum:3a3171062e659a67d38458684b4d4b11
Click to expand...
Click to collapse
Changelog? :c
Angel_Alonso said:
Changelog? :c
Click to expand...
Click to collapse
Looks like they wish us a happy new year by porting PAC-ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PAC-rom 5.1.1 mi4c | Team Superluminal
PAC-ROM (PA+AOKP+CM) based on Android 5.1.1 Lollipop
The rom is pretty new, first build was released on 30/12/15, latest on 2/1/16, two days ago.
The only bug listed on the website is "selinux in permissive mode". (what does that mean??)
SlanDev said:
Looks like they wish us a happy new year by porting PAC-ROM
PAC-rom 5.1.1 mi4c | Team Superluminal
PAC-ROM (PA+AOKP+CM) based on Android 5.1.1 Lollipop
The rom is pretty new, first build was released on 30/12/15, latest on 2/1/16, two days ago.
The only bug listed on the website is "selinux in permissive mode". (what does that mean??)
Click to expand...
Click to collapse
thanks, im downloading!
I'm using it since first build. It's probably the best rom which i was using till now
I didn't found any big buggs. It's quite smooth and stable and PAC stuffs are pretty cool.
SlanDev said:
The only bug listed on the website is "selinux in permissive mode". (what does that mean??)
Click to expand...
Click to collapse
That means the security is lowered, to allow certain functionality to run. e.g. dolby sound enhancer
How is the performance and battery drain compared to MIUI?
mrkubix said:
How is the performance and battery drain compared to MIUI?
Click to expand...
Click to collapse
For me it's similar, but this is subjective ofc. I'm using phone for calling&texting, e-mail's, web; no games. Wi-Fi/LTE and bluetooth always on (smatband sync) + sometimes GPS navigation. That makes approx 2 days per charge - i had the same usage on MIUI. I didn't noticed UI/apps lags.
leledumbo said:
That means the security is lowered, to allow certain functionality to run. e.g. dolby sound enhancer
Click to expand...
Click to collapse
Thanks
Their last release it's pretty awesome regarding battery...
Sent from my Mi-4c using Tapatalk
I don't know if many people tried this pac but it is really worth the try. Until cm13 gets more debuged, this is the best non miui ROM out there
Seems to be on par with CM 12.1 in terms of stability. Worth to try.
Yes, stable and smooth. More features compared to CM12.1
Looks like a very interesting ROM, will be my first choice after I give miui a shot when I get my mi4c.
pac-libra-LP-MR1-Unofficial-20160204-pac-5.1
Removed unneeded services
Use miui stable V7.1.6.0.LXKCNCK proprietary blobs
Sync 20160203 PAC-5.1-LP-MR1 pac-5.1 branch
IMO it's the best rom of all the ones available.
I love my mi4c even more with it.
Would prefer to see this one in marshmallow rather than CM...
Anyway thank you so much team superluminal for this.
And there will be good news soon...
siul_lasc said:
IMO it's the best rom of all the ones available.
I love my mi4c even more with it.
Would prefer to see this one in marshmallow rather than CM...
Anyway thank you so much team superluminal for this.
And there will be good news soon...
Click to expand...
Click to collapse
I have to agree with you. I've been using Pac-Man Rom since the 1st release and it's pretty awesome tbh. And the most stable one I used, even better than miui. I don't really need the CM13 version, but I would rather LOVE to see kernel sources released so we can have a better development for this piece of work.
Sent from my Mi-4c using Tapatalk
Attached you will find the SnapdragonCamera as a flashable archive. The source is from an russian host I've found via Google.
Boot into TWRP, flash the zip-file, clear the cache and reboot.
The app version is 2.0.002.
I've tested it after a clean installation of the latest PAC-rom "pac_libra_LP-MR1.Unofficial_20160204-083837.zip". It will probably also work with earlier releases and CM12.1.
Attention
1. It will replace the default standard Camera app of CyanogenMod.
2. I don't have much knowledge in this things. So try and use it on your own risk.
ands2 said:
Attached you will find the SnapdragonCamera as a flashable archive. The source is from an russian host I've found via Google.
Boot into TWRP, flash the zip-file, clear the cache and reboot.
The app version is 2.0.002.
I've tested it after a clean installation of the latest PAC-rom "pac_libra_LP-MR1.Unofficial_20160204-083837.zip". It will probably also work with earlier releases and CM12.1.
Attention
1. It will replace the default standard Camera app of CyanogenMod.
2. I don't have much knowledge in this things. So try and use it on your own risk.
Click to expand...
Click to collapse
Can you please link the source? Need to check it before flash it. Ty
Sent from my Mi-4c using Tapatalk
chasemyass said:
Can you please link the source? Need to check it before flash it. Ty
Sent from my Mi-4c using Tapatalk
Click to expand...
Click to collapse
You can get it from here. http://www.teamsuperluminal.org/forums/topic/camera/
Is it work with Xiaomi 4c- 2g-16GB??
-Thanks
@chasemyass
The source is the following russian filehoster. Who uploaded it or in which forum it was posted isn't known. I found it yesterday as I was looking for needed arm64 libraries to get the camera working.
http://rghost.ru/7ZP9TX89x
@ermacwins
The linked version is for CM13. My version is tested for CM12.1.
@ngolebaoyen
Yeah, probably it will work. I think the only difference between 16GB and 32GB version is the memory. All other specs should be the same.
I've checked the archive and it contains the camera apk-file and two needed arm64-libraries.
The script itself deletes the default camera app, copies the new apk-file plus the libraries and links the libraries to get loaded. Just download the zip-file and open it with WinRar/7-zip/WinZip or any other compression tool.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hasty focuses on delivering the best possible experience out of the box, without needing a thousand different tweaks, essentially this kernel delivers the best performance, battery life, and stability without needing tweaks by the user at all.
Features
Always using the latest sm8150 CAF tag
Device-specific optimizations
General optimizations
Compatability
MIUI
ROMs using the MIUI vendor
Good to know
ROMs using the Mi9Fod implementation will have broken FOD
ROMs built with Pig's trees will not boot
Downloads
Hasty (AndroidFileHost)
Extras
Hasty's Telegram Group
Buy me a beer
XDA:DevDB Information
Hasty, Kernel for the Redmi K20 / Xiaomi Mi 9T
Contributors
blankaf
Source Code: https://github.com/blankaf/hasty_davinci
Kernel Special Features:
Version Information
Status: Stable
Created 2020-04-18
Last Updated 2020-05-30
Reserved ig
Good to have a new alternative custom kernel for davinci, appreciate your hard work
Love you! Best kernel so far! Thanks dev
Thanks! Interesting.
Thanks!
F2FS support ?
efr07 said:
F2FS support ?
Click to expand...
Click to collapse
Dude this device already f2fs based
is possible to include wireguard module?
And if i want to try this kernel how can i restore original kernel (reflashing original boot.img or dirty reflashing orginial rom) ?
gulp79 said:
is possible to include wireguard module?
And if i want to try this kernel how can i restore original kernel (reflashing original boot.img or dirty reflashing orginial rom) ?
Click to expand...
Click to collapse
Both ways work, but just restore original boot image, it's easier.
sauliiin said:
Love you! Best kernel so far! Thanks dev
Click to expand...
Click to collapse
Working in MiuMix weekly? How's the battery time?
Sent from my Mi 9T using XDA Labs
welder73 said:
Working in MiuMix weekly? How's the battery time?
Click to expand...
Click to collapse
If you read the thread you'll see that works in MIUI
Phone: Mi 9T (64 GB)
ROM: MIUI 11.2 xiaomi.eu 20.3.26 (Beta)
This kernel broke speed connection info (for speed connection info in status bar or any monitoring app).
Otherwise, it's nearly perfect (better reactivity).
Thanks!
Micdu70 said:
Phone: Mi 9T (64 GB)
ROM: MIUI 11.2 xiaomi.eu 20.3.26 (Beta)
This kernel broke speed connection info (for speed connection info in status bar or any monitoring app).
Otherwise, it's nearly perfect (better reactivity).
Thanks!
Click to expand...
Click to collapse
Xiaomi.eu stable 10.0.6 speed connection info is working just fine.
Alin CG said:
Xiaomi.eu stable 10.0.6 speed connection info is working just fine.
Click to expand...
Click to collapse
It was working for me but don't know why it stopped working for no reason...
EDIT: Do you use Magisk?
Micdu70 said:
It was working for me but don't know why it stopped working for no reason...
EDIT: Do you use Magisk?
Click to expand...
Click to collapse
Yes, i use the latest Magisk. I hade problems with Quax Kernel on xiaomi.eu weekly builds and no problem at all on stable builds.
seniug said:
If you read the thread you'll see that works in MIUI
Click to expand...
Click to collapse
I read the thread, I know it works in Miui and that wasn't my question.
I asked @sauliiin because I know he's using Miumix and I wanna know is there any difference in battery time...
Sent from my Mi 9T using XDA Labs
welder73 said:
I read the thread, I know it works in Miui and that wasn't my question.
I asked @sauliiin because I know he's using Miumix and I wanna know is there any difference in battery time...
Sent from my Mi 9T using XDA Labs
Click to expand...
Click to collapse
HI mate not on MiuiMix anymore! But battery seems better on xiaomi eu beta. To soon to say! But you should try it's a stable and smooth kernel
Is magisk working for you guys?
Me with EU20.3.26 got bootloop after rooted with magisk.
EDIT
OK I waited and now it booted up.
I had to reflash magisk after installing this kernel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am happy to announce, that I have successfully ported stable Oxygen OS to the Xiaomi Mi Pad 4 and 4 Plus!:victory:
Using a custom OOS vendor I was able to fix bugs and bring this smooth and stable OS to our device.
Features
-Based on latest OnePlus 7 OxygenOS Open Beta 15
-Fast and working face unlock
-All OOS icon packs included
-Debloated
-Google Camera Go
Bugs
-Maybe Fingerprint on Plus
Everything else is working as far as I know
ROM DOWNLOAD (No need for Gapps as they are already included)
Installation
Required Firmware (MIUI China Dev 9.8.29)
Recommend Recovery (OrangeFox)
1. Make sure your storage is not encrypted and you are using the correct firmware
2. Wipe Dalvik, Data, Cache, System and Vendor
3. Flash the rom zip
4. Reboot
5. IMPORTANT Install activity launcher, launch demo mode and disable always on ambient display or you will experience an issue with a black light in sleep mode. Also remember to hide notch in settings or your UI will look weird.
5. (Optional) Reboot to recovery and root with magisk
6. Enjoy OOS!!
Developers, feel free to use this vendor in your work, as long as you give credit to both me and ProtoDeVNan0, who's vendor I based mine on. :highfive:
XDA:DevDB Information
[ROM][PORT][STABLE]Oxygen OS OB5[clover][25/06/20], ROM for the Xiaomi Mi Pad 4
Contributors
ibooth2004, Erfan (for his tool), Kaypee (He helped me learn a lot), hello_dont_panic for supporting me.
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: MIUI China Dev 9.8.29
Based On: Oxygen OS
Version Information
Status: Stable
Created 2020-05-28
Last Updated 2020-06-25
Reserved
Screenshots
file transfer when conecting to the pc doesn't work
edit: works if usb debugging is enabled
For me, everything works for now. One exception would be the fact that magnetic flip cover does not work!
THX BRO !
tody01 said:
For me, everything works for now. One exception would be the fact that magnetic flip cover does not work!
THX BRO !
Click to expand...
Click to collapse
I will try and fix in next build ?
congratulations ibooth2004??? you are very strong ??
I think it's a great version, but it's a big bug for me that wechat video call can't be used. Please fix it, thank you very much.
Milasertes said:
I think it's a great version, but it's a big bug for me that wechat video call can't be used. Please fix it, thank you very much.
Click to expand...
Click to collapse
I will fix this in the next build, this release was more of an early test build, the next build will be bug free.
ibooth2004 said:
I will fix this in the next build, this release was more of an early test build, the next build will be bug free.
Click to expand...
Click to collapse
Also back gestures don't work after reboot.Please fix it in next build. thank you.
afaceinthecrowd said:
Also back gestures don't work after reboot.Please fix it in next build. thank you.
Click to expand...
Click to collapse
This is a bug that occurs only when hiding gesture bar, I will fix in the next build as this is an early test build.
Thanks. Good job!
To me doesn't work dt2w in lockscreen. When next update? Telegram group?
prumexjt said:
To me doesn't work dt2w in lockscreen. When next update? Telegram group?
Click to expand...
Click to collapse
I am getting a Telegram group soon and I'll send you a link.
Thanks!
prumexjt said:
Thanks!
Click to expand...
Click to collapse
Join here: OOS Mi Pad 4
https://t.me/oosclover
Can anyone check to see if this works with xXx NoLimits or any of the OOS customization/debloating magisk mods?
I have an OP7 Pro and acutely aware of all the shady stuff that comes baked into stock OOS. I'm not sure what all has already been debloated
Wow!
I can't wait for stable build.
Thank you soooo much
gorilla p said:
Can anyone check to see if this works with xXx NoLimits or any of the OOS customization/debloating magisk mods?
I have an OP7 Pro and acutely aware of all the shady stuff that comes baked into stock OOS. I'm not sure what all has already been debloated
Click to expand...
Click to collapse
PM me about the Shady stuff and I will remove it, I have never used a OnePlus device so I am unaware of this. Since this port is based on a GSI it may have already been removed but I'd rather be safe.
ibooth2004 said:
PM me about the Shady stuff and I will remove it, I have never used a OnePlus device so I am unaware of this. Since this port is based on a GSI it may have already been removed but I'd rather be safe.
Click to expand...
Click to collapse
Sent
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 11 (R), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.
GPL compliance:
DEVICE SOURCE: Link
KERNEL SOURCE: Link
Changelog
• Initial Build (from my side)
• February Security Patch
• 3.5mm fixed
• IMS Fixed
• Screen recording fixed
• and much more
Bugs:
• DT2W
• fingerprint won't work on et512
• CTS
Compatibility:
This ROM is compatible with Realme C3, C3i and Narzo 10A
Downloads:
Sourceforge
Installation:
Download the ROM, Magisk (Optional) from the links above.
Format Data from PBRP
Flash the ROM, Magisk (Optional).
Reboot and Enjoy.
Important notes:
Flash Rom then GApps(use core nikgapps) then Magisk or else magisk will give bootloop
Report Bugs but with proper logs else we will consider it a feature.
Credits & collaborations:
Thanks to Witcher and Inder for the Trees as well as Samar, Ashutosh and AgentFabulous for the patches, pronoob and phh for Volte patch
Also thanks to the testers who tested the ROM.
How stable is this though? And what about the battery life?
blakegriplingph said:
How stable is this though? And what about the battery life?
Click to expand...
Click to collapse
Its Stable enough
sarthakroy2002 said:
Its Stable enough
Click to expand...
Click to collapse
How long does the battery last though? On stock I can get two to three days with 11-12 hours screen time. And do you plan to fix CTS as well? Some apps outright refuse to run because they smell test-keys or something of that ilk.
blakegriplingph said:
How long does the battery last though? On stock I can get two to three days with 11-12 hours screen time. And do you plan to fix CTS as well? Some apps outright refuse to run because they smell test-keys or something of that ilk.
Click to expand...
Click to collapse
everything is under work. Today i build a room which passed cts out of box.. and battery life... u can expect better than stock....
sarthakroy2002 said:
everything is under work. Today i build a room which passed cts out of box.. and battery life... u can expect better than stock....
Click to expand...
Click to collapse
I'll look forward to that.
bro we need a karnel for gaming in realme c3 ... please try
Limcion2122 said:
bro we need a karnel for gaming in realme c3 ... please try
Click to expand...
Click to collapse
Not possible as of now as the sources are broken..like camera is still causing issues....
GPS are not working on this build bro. thnx
brickhayabusa said:
GPS are not working on this build bro. thnx
Click to expand...
Click to collapse
Strange, it works on mine:
If we get corvus os... much better..try it
sarthakroy2002 said:
Not possible as of now as the sources are broken..like camera is still causing issues....
Click to expand...
Click to collapse
okk... tnx...
Any ETA on the CTS fix?
blakegriplingph said:
Strange, it works on mine:
Click to expand...
Click to collapse
Try google maps or another gps tracking app
ex
Limcion2122 said:
If we get corvus os... much better..try it
Click to expand...
Click to collapse
expect soon
blakegriplingph said:
Any ETA on the CTS fix?
Click to expand...
Click to collapse
Very soon
sarthakroy2002 said:
Very soon
Click to expand...
Click to collapse
Alright, I needed one as some apps like WRC refuse to work on the current revision.
blakegriplingph said:
Alright, I needed one as some apps like WRC refuse to work on the current revision.
Click to expand...
Click to collapse
you can easily use magisk hide to bypass..btw check out evoX..better
sarthakroy2002 said:
you can easily use magisk hide to bypass..btw check out evoX..better
Click to expand...
Click to collapse
I'm still waiting for the new Lineage build you promised though as from my experience that had far better battery life.
Also, do you know how to properly install the Pixel setup wizard on Lineage? Needed that so I could restore my contacts and app data from my Google backup.
blakegriplingph said:
I'm still waiting for the new Lineage build you promised though as from my experience that had far better battery life.
Also, do you know how to properly install the Pixel setup wizard on Lineage? Needed that so I could restore my contacts and app data from my Google backup.
Click to expand...
Click to collapse
Not possible in lineage...use aosp based.... I would recommend you to wait for 2-3 days as i got official maintainership of PixelPlusUI..... Except very soon... Btw... CTS passes without root.... Super stable..... And another dev got havoc official....