Using Oxygen Updater here in the US I received the latest 10.3.0 update today. everything is running great...as it was before the update. :good:
jaseman said:
Using Oxygen Updater here in the US I received the latest 10.3.0 update today. everything is running great...as it was before the update. :good:
Click to expand...
Click to collapse
Any chance you can upload the zip file?
I haven't received it yet in my oxygen updater.
What's new?
I had to send mine to oneplus to have the charging port repaired or replaced, but I'll gt it back soon.
deleted.
Gordietm said:
Any chance you can upload the zip file?
I haven't received it yet in my oxygen updater.
Click to expand...
Click to collapse
You should set up the new app update oxygen app using option 2 and you'll find it
สุรินทร์ พลโธา said:
You should set up the new app update oxygen app using option 2 and you'll find it
Click to expand...
Click to collapse
Not sure I understand what you're saying.
My bootloader is unlocked, so I need the the full system zip file, not the incremental update.
Correct. Change it to full zip. When you install oxygen updater it should automatically detect root and DL the full package.
Related
hallo all
i just recived my oneplus one today (chiniese model with Cyanogenmod)
the first thing i did was to unlock bootloader and install TWRP and then root it
the OPO cannot find any updates, im stuck with android 4.4.2
i would like to have the newest OTA
what shound i do?
filledk said:
hallo all
i just recived my oneplus one today (chiniese model with Cyanogenmod)
the first thing i did was to unlock bootloader and install TWRP and then root it
the OPO cannot find any updates, im stuck with android 4.4.2
i would like to have the newest OTA
what shound i do?
Click to expand...
Click to collapse
You can flash the zip that you can find at the cyano website, there's the new version.
Castore said:
You can flash the zip that you can find at the cyano website, there's the new version.
Click to expand...
Click to collapse
Yes i know
But i dont want to flash it via TWRP, i just want to update it
filledk said:
Yes i know
But i dont want to flash it via TWRP, i just want to update it
Click to expand...
Click to collapse
But your op post said that you have twrp so why not just use it to side load the zip.
Your phone will eventually get the update. Just be patient, or flash the zip in twrp. Those are your two options.
Sent from my One using Tapatalk
zephiK said:
But your op post said that you have twrp so why not just use it to side load the zip.
Your phone will eventually get the update. Just be patient, or flash the zip in twrp. Those are your two options.
Sent from my One using Tapatalk
Click to expand...
Click to collapse
Okay thanks
I Will just wait then
actually experiencing the same filledk. also don't like the answers you've gotten. doesn't explain whether our OTA update checked works or not.
horadee said:
actually experiencing the same filledk. also don't like the answers you've gotten. doesn't explain whether our OTA update checked works or not.
Click to expand...
Click to collapse
As much as you don't like our response, thats just the way it is. If you truly cannot wait for the OTA to finally come to you then sideload the zip as posted before.
OTAs roll out in stages and intervals, not everybody gets it all at once. It has always been this way since the beginning of Android. Be happy that you're not getting the OTA, there is battery drain in 30O actually.
filledk said:
hallo all
i just recived my oneplus one today (chiniese model with Cyanogenmod)
the first thing i did was to unlock bootloader and install TWRP and then root it
the OPO cannot find any updates, im stuck with android 4.4.2
i would like to have the newest OTA
what shound i do?
Click to expand...
Click to collapse
did you get the OTA update? cause i got mine today and its the same as yours (Chinese model with cyanogenmod), it was on 4.4.2 out the box and under software update there were not updates.
decoy4444 said:
did you get the OTA update? cause i got mine today and its the same as yours (Chinese model with cyanogenmod), it was on 4.4.2 out the box and under software update there were not updates.
Click to expand...
Click to collapse
Hallo there
No i did not recive the ota, But i flashed it with 33r throug TWRP
filledk said:
Hallo there
No i did not recive the ota, But i flashed it with 33r throug TWRP
Click to expand...
Click to collapse
how did you do that, is there a thread about it here?
B381 Beta finally released for C636 a.k.a. SE Asian dual sim P9
Wich security patch include?
Can you upload please a screen capture of the notification panel? I think that the panel have improvements.
But I press apply, it shown the quota had been filled up.
did someone update their p9 using the firmware updater? If so, can u give us some feedback?
SzeMeng76 said:
But I press apply, it shown the quota had been filled up.
Click to expand...
Click to collapse
You must join Huawei's beta program to install the update
trettet said:
You must join Huawei's beta program to install the update
Click to expand...
Click to collapse
how to join?
Got the notification but when I tap apply it prompts has been filled up, as far as I know only those who sign should get the update first but I don't know why it shows in my HiCare app I didn't even sign up for the beta program.
CarLoowwww said:
did someone update their p9 using the firmware updater? If so, can u give us some feedback?
Click to expand...
Click to collapse
Huawei Updater tool works fine, but firmware finder app is more easy.
henryco11 said:
Huawei Updater tool works fine, but firmware finder app is more easy.
Click to expand...
Click to collapse
which OTA update the 300MB or the 1GB+?
When i am sending the update to my updater using the firmware updater app the file with 300MB file size.. it downloaded a 500mb file and then after that it will verify the file and says it need to update the patch 2 which is another 500MB+ update. I dont know why..
Tried all the update files from firmware and all says authentication failed, update not authorized. So guys don't bother.
Sent from my LG-F600K using Tapatalk
Tried downloading it on the Firmware Finder but it doesn't download.
failed to authenticate when install from firmware finder. any method to update without fail?
june_lol said:
failed to authenticate when install from firmware finder. any method to update without fail?
Click to expand...
Click to collapse
did you download the 1.3gb update from Firmware Finder?
cheeze.keyk said:
did you download the 1.3gb update from Firmware Finder?
Click to expand...
Click to collapse
i tried both 1.3gb and 375mb with no success
june_lol said:
failed to authenticate when install from firmware finder. any method to update without fail?
Click to expand...
Click to collapse
Use the DLOAD method
trettet said:
Use the DLOAD method
Click to expand...
Click to collapse
the dload method failed at 5%
Today, my device receive this update, however, I've rooted and installed TWRP on this phone, so, is there anyway to install the update without remove root or TWRP?
Thanks
is b381 still on beta?? because I receive an b381 update just now, and I updated my phone to b381 version
blablablacksheep said:
is b381 still on beta?? because I receive an b381 update just now, and I updated my phone to b381 version
Click to expand...
Click to collapse
I think it is not a beta, I just factory reset my phone and run update and it shows that the OTA update B381 which has a size of 525 MB. I was able to update mine also without any issues.
zyper95 said:
I think it is not a beta, I just factory reset my phone and run update and it shows that the OTA update B381 which has a size of 525 MB. I was able to update mine also without any issues.
Click to expand...
Click to collapse
This was back then, I already got the non-beta OTA update as well
Update is out .got it on my android beta 10
Is that a beta version?
Nope
malerocks said:
Is that a beta version?
Click to expand...
Click to collapse
Nope i had before not now.now stable version
Android 10 after updating
Have a look after updating
Hello I'm on 6?1 ta-1050 and this is the official android 10 update : https://android.googleapis.com/pack.../c6260831df0acdfe9828f18bcea7ffb556f4b2e5.zip
My question is, can I install this via recovery if it's on my internal storage? I don't have an SD card or access to a pc right now. I've read conflicting reports online. Please advise, I don't want to brick my phone.
Thanks
Got mine over OTA.
It's official
zuhaibsarwar said:
Nope i had before not now.now stable version
Click to expand...
Click to collapse
https://twitter.com/NokiaMobile/status/1214856358060625922?s=09
Lol see my post again
darweshhamela said:
https://twitter.com/NokiaMobile/status/1214856358060625922?s=09
Click to expand...
Click to collapse
I told i have beta before now yesterday i got global stable version official update
I had beta Android 10 before nor Android 9 pie
darweshhamela said:
https://twitter.com/NokiaMobile/status/1214856358060625922?s=09
Click to expand...
Click to collapse
So i got Android 10 stable official on Android 10 beta :highfive:
junglebungle said:
Hello I'm on 6?1 ta-1050 and this is the official android 10 update : https://android.googleapis.com/pack.../c6260831df0acdfe9828f18bcea7ffb556f4b2e5.zip
....
Click to expand...
Click to collapse
Is the OTA the same for all variants, or is this ta-1050 specific and eg ta-1043 has a different file?
mikem85 said:
Is the OTA the same for all variants, or is this ta-1050 specific and eg ta-1043 has a different file?
Click to expand...
Click to collapse
I didn't received official OTA via "check for updates" option yet so:
I just manually downloaded and installed this OTA file on my TA-1043 and it works fine! I performed the update via recovery using ADB sideload. Restarted the phone and having android 10. It is so simple!
Machi007 said:
I didn't received official OTA via "check for updates" option yet so:
I just manually downloaded and installed this OTA file on my TA-1043 and it works fine! I performed the update via recovery using ADB sideload. Restarted the phone and having android 10. It is so simple!
Click to expand...
Click to collapse
How to install without twrp recovery ? I don't have root
Indashio said:
How to install without twrp recovery ? I don't have root
Click to expand...
Click to collapse
It is no problem with stock recovery. How to enter stock recovery, just do these steps:
https://www.youtube.com/watch?v=8Fv39sTUvbk
Then you can "Apply update from ADB" or "Apply update from SD card". I did it via ADB sideload.
Machi007 said:
I didn't received official OTA via "check for updates" option yet so:
I just manually downloaded and installed this OTA file on my TA-1043 and it works fine! I performed the update via recovery using ADB sideload. Restarted the phone and having android 10. It is so simple!
Click to expand...
Click to collapse
Works. Tested on my Dutch TA-1043.
Zandoz said:
Works. Tested on my Dutch TA-1043.
Click to expand...
Click to collapse
Works on my US/Canada TA-1045 as well.
Hello,
mikem85 said:
Is the OTA the same for all variants, or is this ta-1050 specific and eg ta-1043 has a different file?
Click to expand...
Click to collapse
This is also for Nokia Ta-1054?
andreihincu said:
This is also for Nokia Ta-1054?
Click to expand...
Click to collapse
If that's a Chinese model, no it won't.
From the Android Sage page with update instructions:
Following is the latest OTA update zip or full stock firmware upgrade package. The following OTA update is only for the international variant. Chinese variants will be updated soon. Chinese variants will be updated soon. So stay tuned.
Click to expand...
Click to collapse
Hello
On french modèle no update for moment
Same here, but I have noticed that when major updates roll out in France we have a 15 day delays usually
adjaxio said:
Hello
On french modèle no update for moment
Click to expand...
Click to collapse
Hello,
I just have a update now on a French model.
I had a oneplus 6 and that updated to android 10 a while ago.
Now I recieved a oneplus 7 pro. But the problem is it will not update to android 10.
Tried a system update check, Said up to date.
Contacted oneplus they mentioned the local file upgrade
Downloaded that ZIP and tried again, it tells me system update installation failed.
I am rooted and have TWRP installed as well as magisk.
Considered flashing from TWRP, but since it is an official system update not sure how that would work.
Is this my best option or anyone have an idea on why it fails.?
Tried different suggestions, nothing seemed to work. Did not try to delete cache yet.
Hi
Did u try Tool All-in-one? Marvellous tool!
Envoyé de mon GM1913 en utilisant Tapatalk
eracet said:
I had a oneplus 6 and that updated to android 10 a while ago.
Now I recieved a oneplus 7 pro. But the problem is it will not update to android 10.
Tried a system update check, Said up to date.
Contacted oneplus they mentioned the local file upgrade
Downloaded that ZIP and tried again, it tells me system update installation failed.
I am rooted and have TWRP installed as well as magisk.
Considered flashing from TWRP, but since it is an official system update not sure how that would work.
Is this my best option or anyone have an idea on why it fails.?
Tried different suggestions, nothing seemed to work. Did not try to delete cache yet.
Click to expand...
Click to collapse
Hi,
you cant update to the latest 10 from 9 ... you need to do it incrementally
eracet said:
I had a oneplus 6 and that updated to android 10 a while ago.
Now I recieved a oneplus 7 pro. But the problem is it will not update to android 10.
Tried a system update check, Said up to date.
Contacted oneplus they mentioned the local file upgrade
Downloaded that ZIP and tried again, it tells me system update installation failed.
I am rooted and have TWRP installed as well as magisk.
Considered flashing from TWRP, but since it is an official system update not sure how that would work.
Is this my best option or anyone have an idea on why it fails.?
Tried different suggestions, nothing seemed to work. Did not try to delete cache yet.
Click to expand...
Click to collapse
You have not provided
any information about your phone:
1.) What version of OxygenOS do you currently have on your phone?
2.) What is your Phone Model?
[GUIDE] OnePlus 7 Pro [Region] (MODEL)
P.S.
From Android 9 to Android 10 (Official Stock ROM)
First with local upgrade go on OxygenOS 10.0.3
After this, upgrade to the latest version of OxygenOS
Local Upgrade
1.) Download the file OxygenOS 10.0.3 Global OnePlus 7 Pro 2.0 GB and copy it to the root of the internal memory
2.) Go to Settings> System> System Updates> Click the gear at the top right> Local Upgrade> Click on the appropriate installation package> Update
3.) After the update is completed, click Restart
4.) The update was successful.
Note If you do not see the firmware file, then check the file extension should be .zip (if you have .zip.jar just rename it by deleting .jar)
eracet said:
I am rooted and have TWRP installed as well as magisk.
Click to expand...
Click to collapse
Read this first (Procedure with TWRP and Magisk):
Upgraded to Open Beta 16, TWRP and Magisk working!!
@soka said:
Hi,
you cant update to the latest 10 from 9 ... you need to do it incrementally
Click to expand...
Click to collapse
Do you know the easiest way to that?
laikexpert said:
You have not provided
any information about your phone:
1.) What version of OxygenOS do you currently have on your phone?
2.) What is your Phone Model?
[GUIDE] OnePlus 7 Pro [Region] (MODEL)
P.S.
From Android 9 to Android 10 (Official Stock ROM)
First with local upgrade go on OxygenOS 10.0.3
After this, upgrade to the latest version of OxygenOS
Local Upgrade
1.) Download the file OxygenOS 10.0.3 Global OnePlus 7 Pro 2.0 GB and copy it to the root of the internal memory
2.) Go to Settings> System> System Updates> Click the gear at the top right> Local Upgrade> Click on the appropriate installation package> Update
3.) After the update is completed, click Restart
4.) The update was successful.
NoteIf you do not see the firmware file, then check the file extension should be .zip (if you have .zip.jar just rename it by deleting .jar)
Read this first (Procedure with TWRP and Magisk):
Upgraded to Open Beta 16, TWRP and Magisk working!!
Click to expand...
Click to collapse
Sorry did not see earlier.
Here is other information as requested.sorry if I missed anything.
GM1917 model
Oxygen OS 9.5.8.GM21AA
Region US
eracet said:
Sorry did not see earlier.
Here is other information as requested.sorry if I missed anything.
GM1917 model
Oxygen OS 9.5.8.GM21AA
Region US
Click to expand...
Click to collapse
Use Oxygen updater.
https://play.google.com/store/apps/details?id=com.arjanvlek.oxygenupdater
Or
https://forum.xda-developers.com/oneplus-7-pro/how-to/oneplus-7-pro-global-repo-oxygen-os-t3930585
CosmicInsight said:
Use Oxygen updater.
https://play.google.com/store/apps/details?id=com.arjanvlek.oxygenupdater
Or
https://forum.xda-developers.com/oneplus-7-pro/how-to/oneplus-7-pro-global-repo-oxygen-os-t3930585
Click to expand...
Click to collapse
Updater didnt work, but ended up booting from local updater after the file was downloaded.
Then I ended up doing local update with the update from oneplus latest.
Now I am working on redoing TWRP. It is sticking on fastboot mode after doing a fastboot boot twrp-3.3.1-4-guacamole.img
Just hope I didnt mess something up when I did the TWRP Magisk A/B retention script.
May try a different TWRP boot img
Newest TWRP worked fine.
ReInstalled Magisk.
All Data and apps are good.
Few minor issues but nothing to serious.
Thanks for all your help !!
eracet said:
Newest TWRP worked fine.
ReInstalled Magisk.
All Data and apps are good.
Few minor issues but nothing to serious.
Thanks for all your help !!
Click to expand...
Click to collapse
I'm glad everything ended well.
I recently downgraded from OS beta 16 to OS 9.5.2. Now I want to upgrade to the latest one OS 10.3.3. i even downloaded the full version. but when trying to install it says failed.
Good evening mate,
well, in your case, you should just use the MSMTools. It's a software which we can use to install any version of the OOS, but obviously, each version flashes the build it was built for.
Just go to this thread: https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325/
thanks to @Some_Random_Username
There, you should see some spoiler buttons, just choose the one you want, download the software and then follow the instructions at the bottom of that post.
Remember, using this software LOCKS your bootloader and also WIPE everything on the device.
My advise is to choose GM57BA 10.3.2, and then just update to 10.3.3 by OTA.
sekk said:
Good evening mate,
well, in your case, you should just use the MSMTools. It's a software which we can use to install any version of the OOS, but obviously, each version flashes the build it was built for.
Just go to this thread: https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325/
thanks to @Some_Random_Username
There, you should see some spoiler buttons, just choose the one you want, download the software and then follow the instructions at the bottom of that post.
Remember, using this software LOCKS your bootloader and also WIPE everything on the device.
My advise is to choose GM57BA 10.3.2, and then just update to 10.3.3 by OTA.
Click to expand...
Click to collapse
Yes I tried using it yesterday but I stupidly updated to 9.5.8. But I have the same problem not getting any OTA updates. Now I will install 10.3.2. But is it guaranteed to get OTA since I dint get any when 9.5.8 was installed through MSMTools. Thank you
JNRao said:
Yes I tried using it yesterday but I stupidly updated to 9.5.8. But I have the same problem not getting any OTA updates. Now I will install 10.3.2. But is it guaranteed to get OTA since I dint get any when 9.5.8 was installed through MSMTools. Thank you
Click to expand...
Click to collapse
Yes, you should get every available OTA... But if you don't, just downlaod the app Oxygen Updater from play store, set it up nad use it to download the updates!