Related
Hello!
I have an Imate Jamin - it is quite an early model - it has black send/receive keys (bought it on February 2006).
The fact is that the camera and the Wifi do not work. When I start the camera application I see the clock icon for a second and then nothing happens (I remain at the exact screen). The wifi on the othe rhand seems to try to detect networks but never finds anything.
So.. the big question is whether this is software related (I have currently hard resetted and use S200's latest firmware) or hardware related. In other words two could happen:.
a. Either my model uses some older camera / wifi and thus the new firmware does not have proper drivers (has anyone else upgraded his eaelry jamin?)
or
b. Due to the many falls something has broken in my jamin (is this expected).
PLEASE PLEASE PLEASE help me with this - I cannot find any solution.. I tried downgrading to see if its firmware related but I got an error message.. (Invalid Command at 95%)
Thanks in advance
Evans
Evans_Prophet said:
Hello!
I have an Imate Jamin - it is quite an early model - it has black send/receive keys (bought it on February 2006).
The fact is that the camera and the Wifi do not work. When I start the camera application I see the clock icon for a second and then nothing happens (I remain at the exact screen). The wifi on the othe rhand seems to try to detect networks but never finds anything.
So.. the big question is whether this is software related (I have currently hard resetted and use S200's latest firmware) or hardware related. In other words two could happen:.
a. Either my model uses some older camera / wifi and thus the new firmware does not have proper drivers (has anyone else upgraded his eaelry jamin?)
or
b. Due to the many falls something has broken in my jamin (is this expected).
PLEASE PLEASE PLEASE help me with this - I cannot find any solution.. I tried downgrading to see if its firmware related but I got an error message.. (Invalid Command at 95%)
Thanks in advance
Evans
Click to expand...
Click to collapse
Which ROM did you install?
AKU 2.2, 2.3, or 3.2?
You have to download using an official ruu rom upgrade (downgrade), there are better people to tell you which one rather than me, I am quite new to this group. One of the upgrades does break wifi/camera so it is not just your phone, a download will cure it, you have not broken it.
HTH
JD
Hi,
I recently got this phone and I´m interested in update because of some bugs.
bug 1) Phone display go dark and the phone freeze when I try to call somebody until the call end (in 50% cases, sometimes it works)
bug 2) GPS jumps from place to place (some software doesn´t work at all). In google maps GPS eg. it jumps from place to place (sometimes it gets the right location but after few seconds it always jumps elsewhere) AGPS and internet connection was also on. It is worthless that way for a car navigation.
So I was wandering if it is possible to flas a new android and solve those problems.
Specs:
Brand: alps (label: Samsung on the back )
Model number: U920+
Android version: 4.0.9
Baseband version: MAUI.11AMD.W12.22.SP.V8.P2, 2012/08/22
Kernel version: 3.0.13
Build number: E1911_V77_ZGTX6_20120904
System updater says that the phone is rooted
The phone looks very similar to galaxy note, but it has only 480*800 display
Can you help me update this phone or fix those bugs?
U920+ update
Hi Johnnnnnnnnnny,
I've got two of the same phone, I'm not an expert, maybe one of mine (the other is clean, already in the box) the only bug is the flash on the screen on calls, not a great problem for me, resolved using the power button to end the calls.
The GPS is eccellent for my poor usage.
If it's possible, can I help you with an image of my phone clean? I had a backup complete with omegavesko-SimpleADBBackup but think is not sufficiente
My phones are localized in italian (NOT ROOTED, I search on the web to make this), but I think is not a problem, for you.
But I'm not able to do an image flashable of the phone, if you or somebody can help me to make this, I can try.
With an english for kids, You can see that: is not my language!!
Bye -
Kadarin70
how to fix the screen flashing when you call
go to the screen settings
at the very end is als_ps calibration
put a book on the phone and press calibrate.
when it's finished (display ok on the screen) your problem will be fixed.
good luck
Hi, I have an px5 xtrons and a problem with the clock on Android 8 (stock and malaysk rom) When I restart the car the unit have the old time of shutdown. (Unit connected to battery and no problem with android 6) Canbus is set on my model car and I have this problem, but if I set canbus model to none the clock works ok. I try to change canbus box but same issue. Anyone have a solution? Thanks
edit: even with the last malaysk android 6 rom same problem. Is it possible to solve putting downgrade version of clock app?
AlexRuhl said:
Hi, I have an px5 xtrons and a problem with the clock on Android 8 (stock and malaysk rom) When I restart the car the unit have the old time of shutdown. (Unit connected to battery and no problem with android 6) Canbus is set on my model car and I have this problem, but if I set canbus model to none the clock works ok. I try to change canbus box but same issue. Anyone have a solution? Thanks
edit: even with the last malaysk android 6 rom same problem. Is it possible to solve putting downgrade version of clock app?
Click to expand...
Click to collapse
I've had the same issue for probably the past year or so when I first started playing with custom roms. I'm pretty sure it happened after doing an MCU update. I have GS PX3 MTCD running hal9 rom. I've tried disabling network time etc but no difference.
When booting the headunit the time appears to be correct, then it changes to the wrong time, then after a few mins when either GPS or wifi has got a connection it corrects itself. I haven't tried changing the canbus model in factory settings as it's already correct.
I've found that the Clock app from Google works. All other including the stock clock keeps the shutoff time.
same problem here after upgrading Xtrons PX5 unit to Android 8.... it seems that somethings changed in CAN-Bus communication. Where bevore the car could write the correct time into the HU it's not possible anymore and the wrong (stucked) time get written into the Dashboard. The time will not synced when the HU is in standby (fastboot)... but will synced within 1 minute if i make a full boot.
dud89 said:
I've found that the Clock app from Google works. All other including the stock clock keeps the shutoff time.
Click to expand...
Click to collapse
hi, can you explain in more detail haw you managed to make clock work with google clock app?
i have installed it but no changes. the clock still shows old shutdown time
Hi I'm having the same issue with my xtrons head unit. Did anybody figure out a fix for this?
Hello,
I have the same problem. I have tried to add clock app to the whitelist, (mtce-utils) but It doesn't work. The canbuis I don't know is working correctly, Torque applicacion can not detect ODB unit and I can not view any value.
I set the clock to get the time from GPS only and I ve never had a problem.
typos1 said:
I set the clock to get the time from GPS only and I ve never had a problem.
Click to expand...
Click to collapse
Yes, but it only works if you have GPS connection (outdoor). If you are into garage there is no GPS udpate.
I have XTRON PX5 unit with Malaysk 8.0 and I have set the following things on whitelist:
com.android.settings
com.android.providers.settings
com.microtek.hctwidget
com.android.deskclock
com.cyanogenmod.lockclock
I have used mtce-utils ehitelist and Graser Daisata Xposed modules and none of them works.
I have connected the unit to the battery to avoid losing memory.
What can be the problem?
Thanks!
Same problem here :|
Android 6.0 clock also not working
As of 11/30/2018 after doing an MCU update 2.83 for Android 6.0, my clock also stopped syncing with the car's when turning it back on. It also display the last time right before the car was turned off.
Turning on/off GPS update or network update or setting the clock manually makes no difference and does not fix issue. Hope to see a solution to this.
If you revert back to the original MCU version, does the clock start working normally again? I'm assuming it would... I would just revert back to the original MCU version and be done with it. Unless, of course, there is some specific fix in the newer MCU that you needed?
greygoose82 said:
As of 11/30/2018 after doing an MCU update 2.83 for Android 6.0, my clock also stopped syncing with the car's when turning it back on. It also display the last time right before the car was turned off.
Turning on/off GPS update or network update or setting the clock manually makes no difference and does not fix issue. Hope to see a solution to this.
Click to expand...
Click to collapse
Did you export you MCU config before updating the MCU ?
I don't mind reverting back to the original MCU version I had but the problem I had with that one was my audio kept going back to sounding like mono instead of stereo each time I started the car. When I played video or music sound would only come out on my right door speakers. I kept having to do a factory reset each time to get it to come out at both sides.
I haven't browsed through the forum enough to see if anyone else experienced similar issues or if there were fixes for this.
greygoose82 said:
I don't mind reverting back to the original MCU version I had but the problem I had with that one was my audio kept going back to sounding like mono instead of stereo each time I started the car. When I played video or music sound would only come out on my right door speakers. I kept having to do a factory reset each time to get it to come out at both sides.
I haven't browsed through the forum enough to see if anyone else experienced similar issues or if there were fixes for this.
Click to expand...
Click to collapse
You could try the latest MCU, they may have sorted it out, you dont say what unit you have.
You could also try updating to Ore, it may also be fixed in the latest ROM.
Thanks I'll have to give it a try. My unit is the HA 2150 V600 with the px5 chip.
HI did anybody manage to sort the clock issue out on the headunits thanks
I have been having this same issue for a long time and hoping to find a fix for it.
I have tried the Google Clock app, that did not work.
I have updated my MCU from Ver 1.81 to 2.65 to 2.75 and now on 3.0.1. None of these MCU versions fix this issue.
I have also tried the V2.75_sp and no change (Did not think this would help with this issue, but tried it anyways)
On each of the MCU versions above, I have tired multiple roms (Stock, Malyask and Hal9K) and no luck fixing the problem.
The only time I have been able for this to work is if I have wifi enabled and connected to a Hotspot and Network time sync selected in the settings/Date&Time. With this configuration the time sync works everytime.
Now when the time does not Sync and if I open the GPS Plus app, the time displayed in the app is correct. So based on this, the only thing I can think of is that somehow the time from GPS is not being pushed to the clock app.
Guys I think I found the solution, at least it works in my case. What happens actually is that the unit is set to autosleep and not to shut it down. So when the unit goes to sleep, everything freezes including the clock time. When you put back the key contact, the unit goes back to live and all the apps start again from the moment when they went to sleep.
The solution which seems to work in my case, is to set the unit to shut down after I turn off the engine. Of course, it takes around a minute to turn on back when I put the contact key, but because the whole unit has been shut down, when it starts again it checks also the time clock and it syncs with either the GPS time or with the network provider time zone (depends what you have set). In my case I use the GPS time zone and with this workaround everything works well now.
It's not so much the MCU updates but the actual system update. Going backwards to the 20171214 system update will get the clock working fine again and should work with the most recent MCU update (my instance). With this version I didn't have to bother with changing the auto sleep or shutdown settings since it's an inconvenience to wait for a full minute for the unit to boot up. Also did not have to change GPS or network time sync either. I turn the key ON and the clock just works right away.
Hi there,
despite the issue, that my radio in disconnecting USB (incl. Wifi, randomly, especially when it is colder) - which I tried to fix by replacing the USB chip to a GL852G - I now have a new issue since some days:
Now, my radio also disconnects Wi-Fi randomly without turning on again, while USB itself is not interuppted.
That issue is very new to me.
I installed a newer MCU some days ago (3.13 and 3.17) as this fixed an issue with the Bluetooth App automatically opening at the bottom of the screen when making a phone call.
I did not went back to the previous MCU yet (which was a 3.04 I think), as I don't think the issue is related to this. After MCU upgrade, I didn't have the above mentioned issue since more than a week.
Anyone having a similiar or same issue?
Maybe anony can confirm, MCU > 3.x having a wifi issue?
Thanks a lot!
Christian
Hi Christian,
I had the same issue. In the beginning I was able to compensate the issue with an automation app. (If WLAN turns off -> Turn on) After some time I couldn't activate the WLAN at all without restarting the radio. At some point, I could not do that anymore. Then I looked for a working LTE-Stick, but quickly understood that there is NO working 4G-Stick. Only a few UMTS sticks work. Via XDA-Developer found out that there are 4G sticks that are recognized as USB-to-Ethernet devices. Then I bought the HUAWEI E3372 LTE Surfstick. However, this does not work out-of-the-box with the radio. After a lot of manual work and learning-by-doing (installing an unofficial firmware), I managed to make it work now. The only disadvantage is that I no longer have a hotspot for other devices in the car.
Best regards,
Michael
gforums said:
Hi there,
despite the issue, that my radio in disconnecting USB (incl. Wifi, randomly, especially when it is colder) - which I tried to fix by replacing the USB chip to a GL852G - I now have a new issue since some days:
Now, my radio also disconnects Wi-Fi randomly without turning on again, while USB itself is not interuppted.
That issue is very new to me.
I installed a newer MCU some days ago (3.13 and 3.17) as this fixed an issue with the Bluetooth App automatically opening at the bottom of the screen when making a phone call.
I did not went back to the previous MCU yet (which was a 3.04 I think), as I don't think the issue is related to this. After MCU upgrade, I didn't have the above mentioned issue since more than a week.
Anyone having a similiar or same issue?
Maybe anony can confirm, MCU > 3.x having a wifi issue?
Thanks a lot!
Christian
Click to expand...
Click to collapse
Hi Michael,
Appreciate your answer, many thanks.
I am running hal9k ROM. If you have more detailed instructions, it works be great if you could share them with me.
Meanwhile I am trying to get a replacement device, as it is still under warranty and was bought in uk.
Thank you!
Christan
Weyoune85 said:
Hi Christian,
I had the same issue. In the beginning I was able to compensate the issue with an automation app. (If WLAN turns off -> Turn on) After some time I couldn't activate the WLAN at all without restarting the radio. At some point, I could not do that anymore. Then I looked for a working LTE-Stick, but quickly understood that there is NO working 4G-Stick. Only a few UMTS sticks work. Via XDA-Developer found out that there are 4G sticks that are recognized as USB-to-Ethernet devices. Then I bought the HUAWEI E3372 LTE Surfstick. However, this does not work out-of-the-box with the radio. After a lot of manual work and learning-by-doing (installing an unofficial firmware), I managed to make it work now. The only disadvantage is that I no longer have a hotspot for other devices in the car.
Best regards,
Michael
Click to expand...
Click to collapse
Weyoune85 said:
Then I bought the HUAWEI E3372 LTE Surfstick. However, this does not work out-of-the-box with the radio. After a lot of manual work and learning-by-doing (installing an unofficial firmware), I managed to make it work now. The only disadvantage is that I no longer have a hotspot for other devices in the car.
Best regards,
Michael
Click to expand...
Click to collapse
Fellow suffer as well.
Any chance of a link or hint of a guide to modify the E3372 stick?
Modifying E3372 was a tough stuff, actually. A lot of try-and-error. At one point I even thought to have bricked the stick.
Anyway, I got all information from following thread:
https://forum.xda-developers.com/an.../real-3g-4g-usb-modem-sticks-px5-px4-t3898344
On page 3, a link to a russian site is provided:
https://4pda.ru/forum/index.php?showtopic=883219&st=3620#entry66908061
I do not speak russian, so I used the DeepL Translator in order to translate everything.
To sum up, you need to install a modified webui und firmware which supports ethernet-over-usb (CDC) mode. The Versions I am using are:
E3272s-153_Update_22.491.09.00.00_M_AT_05.10
WebUI 17.100.17.00.143
https://www.lteforum.at/mobilfunk/firmware-versionen-hi-non-hilink-e3372h-inkl-mod.2691/ is a good source for downloading the files.
pky said:
Fellow suffer as well.
Any chance of a link or hint of a guide to modify the E3372 stick?
Click to expand...
Click to collapse
Weyoune85 said:
Modifying E3372 was a tough stuff, actually. A lot of try-and-error. At one point I even thought to have bricked the stick.
Anyway, I got all information from following thread:
https://forum.xda-developers.com/an.../real-3g-4g-usb-modem-sticks-px5-px4-t3898344
On page 3, a link to a russian site is provided:
https://4pda.ru/forum/index.php?showtopic=883219&st=3620#entry66908061
I do not speak russian, so I used the DeepL Translator in order to translate everything.
To sum up, you need to install a modified webui und firmware which supports ethernet-over-usb (CDC) mode. The Versions I am using are:
E3272s-153_Update_22.491.09.00.00_M_AT_05.10
WebUI 17.100.17.00.143
https://www.lteforum.at/mobilfunk/firmware-versionen-hi-non-hilink-e3372h-inkl-mod.2691/ is a good source for downloading the files.
Click to expand...
Click to collapse
Thank you very much for your reply. Will let you know how I get on.
Hello
I can't turn on wifi.. and usb hub stop working..*
This problem happened after restart factory*
Please help me
Hi guys,
I have a Joying 10.1 inch head unit and and the GPS time and date is not correct, I have tried manually setting up the date on the settings and set the automatic on the settings but still won't update correctly. Has anyone experienced this? Is there a fix that you can suggest?
Unit: Joying 10.1 Sofia 3gr GTX MOD
I'm having the same issue with mine-emailed joying support and of course they weren't much help. It seems to have randomly started happening, then I did a full firmware flash and it still happens.
See this post from @IG_Vasilich : https://forum.xda-developers.com/t/...9a3-2018-04-22.3742482/page-119#post-84877441
修正 GPS 日期
Tried this on my Joying JY-UMS03N2 Intel unit, but the GPS date is still wrong. I guess the receiver itself needs updated firmware?
Also noticed in this thread that it may contain a Trojan, so will revert the C9 Server back if I can figure out how ? https://forum.xda-developers.com/t/...ing-rom-v9a3-2018-04-22.3742482/post-85024725
Anyone solved this yet?
Nobody has been able to solve this? Can anyone explain how this even happened? My headunit doesn't even connect to the Internet so my guess is that it was something preprogrammed.
Any word on a solution?