Related
Below are a list of all known YU Yuphoria OTA updates. Each time there is a new OTA update, the links will be posted here as they become available. If you get an OTA notification that we don't have a link for, please pull the filename out of logcat for us before applying the OTA and post it here. Once you post it, I'll update this post and mirror the file, in case CyanogenMod pulls it down in the future.
OTA Updates - lettuce
Current firmware: Android 5.1.1, Build LMY49J, Cyanogen OS version 12.1-YOG4PAS8A8
YOG4PAS8A8 from YOG4PAS47N - http://builds.cyngn.com/incremental/lettuce/cm-lettuce-bafcc5769e-to-7490f96009-signed.zip
YOG4PAS47N from YNG1TBS2P2 - http://builds.cyngn.com/incremental/lettuce/cm-lettuce-79f9ccdc85-to-bafcc5769e-signed.zip
YNG1TBS2P2 from YNG1TBS1O3 - http://builds.cyngn.com/fota/incremental/lettuce/cm-lettuce-405aaf9dc6-to-79f9ccdc85-signed.zip
Mirrors
http://forum.xda-developers.com/yu-...u-yuphoria-mirrors-official-cyanogen-t3140830
SPECIAL THANKS
@oldblue910 for maintaining similar threads for various Nexus & GPE devices.
HASH (MD5)
Every AndroidFileHost mirror link consists of corresponding MD5 hash; please compare them after download.
INSTALLATION GUIDE
As long as your system is stock, flash (using ADB sideload or from SD card) in stock or custom recovery. Always re-flash the SuperSU zip immediately following to re-gain root access. Bootloader status isn't checked while updating.
Which version update to apply if current version is YNG1TAS1K0 ?
Hey, can anyone give me the update history for Yu Yureka so that I can know which version to upgrade to from YNG1TAS1K0 ?
I tried installing the whole 832 MB update from YNG1TAS1K0 to YNG1TBS2P2 and it failed.
Great share bro. It is very much needed. Kudos to you for making this for yuphoria
Removed signed zips.
Added COS 12.1 OTA (YOG4PAS47N from YNG1TBS2P2).
Credit goes to [email protected] Forums.
Titokhan said:
Added COS 12.1 OTA (YOG4PAS47N from YNG1TBS2P2).
Credit goes to [email protected] Forums.
Click to expand...
Click to collapse
I'm here too
And no need to thank me so much, but I appreciate it:good:
First post updated, added YOG4PAS8A8 from YOG4PAS47N incremental OTA URL.
Code:
Code:
/*
* Your probably long expired warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you
* and point my finger right back at you.
*/
Installation Instructions
Make sure you have a second partition on your SD card formatted to ext4 before flashing!!!! This can be created with either CWM recovery or with TWRP. gparted on Linux should also work. If you "SD card not supported" try repartitionning. If you get "Encryption unsuccesful" then you need to format the second partition as ext4 (or f2fs, your choice).
If on a BML rom (stock-based GB)...
1. Reboot to recovery
2. Make sure your version of CWM is at least 5.x
3. Install zip. It will reboot a couple of times, don't be worried.
4. If you want gapps, reboot to recovery, wipe data+cache and install gapps.
5. If you want root, flash SuperSU whenever
If on an MTD rom (CM7 and all ICS+)
1. Reboot to recovery
2. Wipe data, dalvik/art cache, system, and cache partitions
3. Install zip
4. If you want root or Gapps, install them now.
The first boot can take several minutes. Be patient. If it takes 10+ minutes, pull the battery and reboot to recovery.
Things to Take Note Of
I actually have a T959P, not a T959V... It was released by Telus in Canada. It is a very similar device (I can run ROMs for the T959V with limited problems - ie sometimes I get wakelocks and the gps never works), it has a different GPS chipset and also uses different cell bands (but I can still use your guys modems but I lose access to the 850Mhz band). I have created a build specifically for the T959V as best as I can guess.
Bluetooth only enables from the notification pulldown, not when you go directly to settings. It does work just fine afterwards though
If you're coming from either the last Lollipop build or the initial pre-release Marshmallow build, there is a bug in TWRP that will prevent flashing anything but the ROM. To get around this, please flash the Marshmallow zip, then reboot to recovery, and then follow the typical instructions.
If you decide to install gapps at a later date (ie after you've installed the ROM), you must do a factory reset first - otherwise you will get force-closes upon bootup
If you come across a bug, feel free to let me know by posting in this thread. I will not be working non-stop on this project, but will try to fix bugs that affect me as this is still my main phone (out of choice, not necessity).
This build is very close to the official omni source code. This means that the recovery is TWRP and there aren't any added "features"
In order to get it rooted, you need to install SuperSu.
Gapps eat up about an extra 30MB of RAM so they slow down the device - tread carefully.
Backup Backup Backup! I'm not responsible for you losing any data.
Working
Taking pictures
RIL
SMS
Data
Recovery
Bluetooth
Wifi
Vibration
Video Recording
Automatic Brightness
Encryption
Compass
GPS
Headset Buttons
Semi-Working
Powered-off charging animation - works at first, but then stops working. Seems to be an Omni problem, but it still charges...
What doesn't
SElinux is currently in permissive mode. Will not be going to enforcing, this would require a data wipe as well
What's been removed
TV-Out - It was removed upstream plus I think binary blobs would need a ton of shimming in Lollipop+
Everything else is not tested!!!
XDA:DevDB Information
Unofficial Omnirom 6.0 for Galaxy S 4G, ROM for the Samsung Galaxy S 4G
Contributors
xc-racer99
Source Code: https://github.com/omnirom
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Based On: OmniRom
Version Information
Status: Beta
Created 2016-01-11
Last Updated 2016-05-12
Thanks Time!
Thanks Time!
This would not have been possible without the following people:
Thanks to humberos for bringing Lollipop to the first-gen Galaxy S series. This would not have been possible without his work.
Thanks to FB and Dao for their work on the CM-11 device tree. I used several of their fixes.
Thanks to noiphonehere for his device trees and kernel, most of my work was based off of his.
Thanks to the OMAP4 AOSP team for their work on porting CMA to a 3.0 kernel.
Thanks to bhundven and the other members of teamacid for their work on the aries kernel.
Thanks to all others that have helped get this phone to where it is today!
Thanks to vcmerritt. A name you're probably not familiar with, but he was the only one to create something for the T959P and without him I'd still be on stock...
Build your own!
Follow the instructions at http://docs.omnirom.org/Setting_Up_A_Compile_Environment using the android-6.0 branch
Before doing a repo sync, put the galaxy_s_series.xml file from the Downloads folder in .repo/local_manifests folder of the source tree (create the local_manifests folder if necessary).
After syncing the source, open a terminal and in the directory where you downloaded the source code type "./device/samsung/aries-common/patches/apply_patches.sh" to apply the patches necessary to have a working build. Then run "source ./build/envsetup.sh" and then "brunch galaxys4gmtd". For future builds, only the envsetup and the brunch parts are necessary. Please note that you will have to re-run the apply_patches.sh script after each time that you run repo sync. (Note: the patch script no longer runs automatically)
You should be able to use my trees for other first-gen galaxy S devices. You will need to apply a patch similar to https://github.com/xc-racer99/andro...mmit/fe6bc6b82881a12fc4a5647812f3cf0f52f79c6a to your device tree (if coming from Omni 5.1). I haven't done anything to P1 trees and may have broken the kernel for it...
Changelog
2015-12-20
Initial pre-release - many bugs
2015-12-26
Second pre-release - fewer bugs, but still plenty
2016-01-07
Initial actual release. Quite stable with minimal bugs
2016-01-23
Updated Omni Source code
Fixed Google Play (and other apps) download error (I think...)
New bootanimation - Its the new Omni one - it doesn't fit on our screen the best but it doesn't have one section lit up all the time so the screen doesn't burn in like the old one
Freed a bit more RAM
Improved zRAM performance by using LZ4 instead of LZO
Added T959P build
Changelog for 2016-02-04
Updated Omni source code - includes Feb security patches thanks to the Omni Team
Brought kernel defconfigs inline with upstream kernel/common (well, as close as possible without breaking things
More work on selinux - but its still in permissive mode
Added download mirror thanks to @FBis251
md5sum for the T959V - 975730824b335d9521d1201d4dac82b7
md5sum for the T959P - b209b78d3bc5dd4c5f5a7224a9d780c4
Changelog for 2016-02-29
Updated Omni source - plenty of new features
Low-resource spinner from LegacyXperia (means that the loading spinner isn't the only thing using the CPU)
Miscellaneous performance tweaks (see github if interested)
md5sum for T959V: a7aa8cca3259208eafba7c2cccecdbfd
md5sum for T959P: 879256c93a0e58de0fb9c9e1be91e0e9
Changelog for 2016-04-02
Security fixes in the kernel
Freed roughly ~4MB of RAM in kernel
Updated android drivers resulting in better multitasking
OpenDelta updating system removed as we weren't using it (it used ~3MB of RAM)
Recents menu now has less lag when opened
Selinux contexts have changed. It could likely be put to enforcing now but this would require a complete data wipe so its still permissive
Live Wallpapers removed - we're low-ram
Bootanimation now fits the screen better
PowerHAL removed - it was broken and has been for a while...
Misc other changes - if you didn't notice problems, you won't notice the solutions
Known bug - Camera on T959V is broken...
md5sum for T959V: 247a721f4c27c5191a2a460e4c72ba3b
md5sum for T959P: d15339d8aa10f765155bdd8d1bb0c5f5
Changelog for 2016-04-08
Fixed camera on T959V
Security patch level of April 2, 2016 (latest to date)
Headset buttons fixed
T959V md5sum: 2b1560b99402c73275d1f69b3ceb9a22
T959P md5sum: e102cce0d624383fb85a32321c98c645
Changelog for 2016-05-09
Uses CMA kernel by default
Performance Control can now modify voltages
Systemless SuperSU is now supported
WebM playback is now working
EFS backup in TWRP now works
Data on boot should now work - no need to toggle airplane mode anymore
md5sum for T959P - 118789dd68760d9fd18cc961398bf346
md5sum for T959V - f9375a8d9792c3a0d222c113213c014d
Changelog for 2016-06-07
Security patch level of June 1, 2016
Microphone mute now works when in call
Battery now charges to 100% and should read properly after a system crash
Standby times should be improved
Slightly less RAM - but should result in better graphics performance
CMA crashes fixed (at least, I haven't crashed once since I started testing the patch a week or so ago)
PowerHAL is back - CPU is boosted when turning screen on to avoid delay
md5sum for the T959P: eeed77fb84189e84f2264e32d18ce454
md5sum for the T959V: b6457319d248029429183c342514b072
Changelog for 2016-08-02
First unified build (ie it works on both the T959P and T959V)
Screen recording now works in portrait mode
MMS should be able to be sent when data is disabled (will still use data though)
Default Camera app portrait photos are no longer square
SuperSU systemless updated to 2.76
Slightly less audio latency with UI sounds (and some sounds have changed)
Data should also be working on boot
Slight changes to battery and graphics config
Security patch level of August 5, 2016 (I'm a time traveller...)
md5sum: df587e0bd69552e0ece4b4ba3e214f45
Source, Downloads, Misc Notes
Main Source
http://github.com/omnirom
Device Specific Source Code
http://github.com/xc-racer99/android_device_samsung_telusgalaxys4gmtd for the device tree (see android-6.0-t959v branch)
http://github.com/xc-racer99/android_device_samsung_aries-common for the common device tree (see android-6.0 branch). The patches folder holds all the necessary patches along with a script to apply the patches.
http://github.com/xc-racer99/android_kernel_samsung_aries for the kernel (see android-6.0 branch)
http://github.com/xc-racer99/proprietary_vendor_samsung for the prop blobs (see android-6.0 branch)
Downloads!
All builds are found at https://drive.google.com/folderview?id=0B7vXjzo0Hj-iOGJ4dmdCd09OZmM&usp=sharing. As well, recent builds are mirrored on https://files.fernandob.com/#xc-racer99/Omni6.0
Gapps
Gapps cause the first boot to be very, very laggy. Things do improve after that. The best way to get through the Setup Wizard (IMO) is to skip everything possible (ie connecting to Wifi, settings up a Google Account, etc) and then reboot. You can manually add a Google Account later in Settings. While any (small) Marshmallow gapps should work, I have had success with OpenGapps pico package from www.opengapps.org (untested on recent builds).
SuperSu
SuperSu can be found at http://forum.xda-developers.com/apps/supersu. If on May 2016+ builds, systemless 2.71 works (other systemless versions may work, untested). If you're on an older build, you need to either force system mode (create a file in /system or /data called .supersu with the contents "SYSTEMLESS=false") or use an older version (ie version 2.52 or earlier). August 2016 build updates the systemless to 2.76.
Woooow thanks
As you suggested, Gapps caused lots of problems...made the ROM very slow and laggy, lots of FC's, lots of random reboots, etc. I re-flashed without Gapps. Was able to restore apps with TB and root with SuperSu. The basics...calling, browsing, messaging, camera...are working fine. Haven't taken it for a ride yet, but GPS test picked up 5 satellites and I haven't even taken it outside yet. If I desperately need another app, I guess I can find the .apk somewhere. Since I did a TWRP backup, maybe next week I'll try the pico gapps again and see what happens. At any rate, wonderful work.
Update: Took it out for a spin this afternoon....GPS works fine.
Been running the 1/7 for a few days. loving it so far
New Build Uploaded!
Alright, I've uploaded a new build
Changelog for 2016-01-23
Updated Omni Source code
Fixed Google Play (and other apps) download error (I think...)
New bootanimation - Its the new Omni one - it doesn't fit on our screen the best but it doesn't have one section lit up all the time so the screen doesn't burn in like the old one
Freed a bit more RAM
Improved zRAM performance by using LZ4 instead of LZO
I've also uploaded a T959P build as I had a request for one. Let me know if you guys find any more bugs.
New build flashed fine although I had to re-flash the SuperSU zip...no problem since I already had it on my SD card. I'll let it rest up for a day or two and then I'll try to flash the pico-gapps and see if it
will run smoothly....good job.
DickyG said:
New build flashed fine although I had to re-flash the SuperSU zip...no problem since I already had it on my SD card. I'll let it rest up for a day or two and then I'll try to flash the pico-gapps and see if it
will run smoothly....good job.
Click to expand...
Click to collapse
Sounds good. Do note that when/if you flash gapps, you will need to do a complete data wipe first, otherwise you will get force-closes like crazy.
I've always just reflashed SuperSU manually and never relied on the script to restore it so I can't help you there.
Tried to install over MTD SlimSaber with TWRP 2.7.0.0, kept getting Status: 7 error with updater.sh script.
Any way to fix this?
Thanks in advance.
SuccubusInc said:
Tried to install over MTD SlimSaber with TWRP 2.7.0.0, kept getting Status: 7 error with updater.sh script.
Any way to fix this?
Thanks in advance.
Click to expand...
Click to collapse
Hmm, going back to to stock with a OneClick/Heimdall/Odin will work for sure.
Alternatively, check if there is an omni.cfg file on your SD card. If there is, delete it and try again. Also, if you can get me the exact wording of the error output that would be great, along with the omni_mtd.log file from the SDcard.
xc-racer99 said:
Hmm, going back to to stock with a OneClick/Heimdall/Odin will work for sure.
Alternatively, check if there is an omni.cfg file on your SD card. If there is, delete it and try again. Also, if you can get me the exact wording of the error output that would be great, along with the omni_mtd.log file from the SDcard.
Click to expand...
Click to collapse
I will Heimdall One-Click back to KJ6 and reflash the ROM after checking for the omni.cfg, and will quote the output and the log if I get another error.
I'll be back by 5:00pm PST. I have school to take care of.
UPDATE:
Tried again after a full wipe [not a restore to stock] and got this:
Installing '/sdcard/omni-6.0.1-20160123_galaxys4gmtd-HOMEMADE.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found.
assert failed: run_program("/tmp/updater.sh") = = 0
E:Error executing updater binary in zip '/sdcard/omni-6.0.1-20160123_galaxys4gmtd-HOMEMADE.zip'
Error flashing zip '/sdcard/omni-6.0.1-20160123_galaxys4gmtd-HOMEMADE.zip'
Updating partition details...
Click to expand...
Click to collapse
Is there any kernel/recovery you recommend for flashing after restoring to stock?
I've tried before on AntonX Voodoo Lagfix recovery and got a similar error.
SuccubusInc said:
I will Heimdall One-Click back to KJ6 and reflash the ROM after checking for the omni.cfg, and will quote the output and the log if I get another error.
I'll be back by 5:00pm PST. I have school to take care of.
UPDATE:
Tried again after a full wipe [not a restore to stock] and got this:
Is there any kernel/recovery you recommend for flashing after restoring to stock?
I've tried before on AntonX Voodoo Lagfix recovery and got a similar error.
Click to expand...
Click to collapse
I typically used the Blastoff kernel, but I have my own one-click as I have a Canadian variant.
Also, the omni_mtd.log will tell which part of the updater.sh failed. Another thing to check is if you have a second partition on your SD card. This ROM requires one as /data is put there.
xc-racer99 said:
I typically used the Blastoff kernel, but I have my own one-click as I have a Canadian variant.
Also, the omni_mtd.log will tell which part of the updater.sh failed. Another thing to check is if you have a second partition on your SD card. This ROM requires one as /data is put there.
Click to expand...
Click to collapse
I'll try out Blastoff if I can find it. But it probably failed because I did not partition my sdcard. I'll see if that helps later.
Thanks a lot.
xc-racer99 said:
I typically used the Blastoff kernel, but I have my own one-click as I have a Canadian variant.
Also, the omni_mtd.log will tell which part of the updater.sh failed. Another thing to check is if you have a second partition on your SD card. This ROM requires one as /data is put there.
Click to expand...
Click to collapse
Hey, xc-racer99, after about four assorted blind attempts at installing your work, I flashed back to stock/AntonX kernel with Heimdall and full wiped, then used CWM to create a 4GB partition on my sdcard. The ROM installed through CWM, then TWRP without an error and booted up after fifteen minutes or so of OMNI animation, and is running on my SGS4G without any issues. The only noticeable lag was for the first five minutes after the initial boot. Now my device is gliding smoothly after a few tweaks in the performance settings and turning off background processes. Thank you so very much.
Next time, I'll read the entire post before blundering through the install process with the assumption that I know what I'm doing [as usual].
Sorry for the trouble, if indeed I was any.
xc-racer99 said:
Alright, I've uploaded a new build
Changelog for 2016-01-23
...
Fixed Google Play (and other apps) download error (I think...)
...
Click to expand...
Click to collapse
I tried Pico gapps and the store works perfectly for me now. Thanks!
New Build Uploaded!
Changelog for 2016-02-04
Updated Omni source code - includes Feb security patches thanks to the Omni Team
Brought kernel defconfigs inline with upstream kernel/common (well, as close as possible without breaking things
More work on selinux - but its still in permissive mode
md5sum for the T959V - 975730824b335d9521d1201d4dac82b7
md5sum for the T959P - b209b78d3bc5dd4c5f5a7224a9d780c4
Still the same bugs present - headset buttons broken (have been on all 3.0 kernel-based ROMs for the Galaxy S 4G), laggy 720p recording, broken webM playback, microphone mute in calls, and bluetooth tethering.
Download link is the same as it always is. Also, thanks to @FBis251, we now have a mirror. It is located at https://files.fernandob.com/#xc-racer99//Omni6.0
Wooow...thanks
xc-racer99 said:
Changelog for 2016-02-04
Updated Omni source code - includes Feb security patches thanks to the Omni Team
Brought kernel defconfigs inline with upstream kernel/common (well, as close as possible without breaking things
More work on selinux - but its still in permissive mode
md5sum for the T959V - 975730824b335d9521d1201d4dac82b7
md5sum for the T959P - b209b78d3bc5dd4c5f5a7224a9d780c4
Still the same bugs present - headset buttons broken (have been on all 3.0 kernel-based ROMs for the Galaxy S 4G), laggy 720p recording, broken webM playback, microphone mute in calls, and bluetooth tethering.
Download link is the same as it always is. Also, thanks to @FBis251, we now have a mirror. It is located at https://files.fernandob.com/#xc-racer99//Omni6.0
Click to expand...
Click to collapse
Finally got pico gapps to run...the initial setup took quite a while but now that it's settled in, no problems. It's also interesting to note that Link2SD is running fine while it seems to be a major problem for other Lollipop & Marshmallow ROM's on other devices.
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void. Knox 0x1.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
WARNING:
This is not a stable version of LineageOS. If you run into problems, give us a logcat as you report your problem or GTFO.
If your problem cannot be reproduced without using Magisk modules or Xposed, don't report it! The same goes with custom kernels.
Prerequisites:
The latest version of TWRP. This is an absolute requirement.
Your Samsung Galaxy Note 3.
The latest modem and your bootloader unlocked. Link on how to get that done is found below.
How to flash this ROM:
From other custom ROMs (RR-O, LineageOS 14.1, etc):
Download the zip file for your variant of the device. Use the table below to figure out which variant to use.
Make sure this zip file is saved to your device (just to get things done quickly).
If you want Google Play functionality, download OpenGApps (link below). (optional)
Reboot into TWRP (Volume Up + Home + Power or Advanced Restart).
Make a backup (optional).
Wipe System, Data, Cache, and Dalvik Cache partitions with Advanced Wipe. (required if upgrading from LOS 14.1 or RR-N)
Flash the ROM you just downloaded.
Flash OpenGApps for Android 8.1 if you want Google services (optional).
If you want root, flash Magisk.
Reboot and proceed normally with installation.
From LineageOS 15.1 (if you're updating):
Download the zip file for your variant of the device.
Reboot into TWRP.
Flash the zip file as normal. No wipes needed.
Reboot. You have updated your device.
Variants:
It is important that you get the right variant based on your model code! Otherwise, you might not be able to make phone calls, and run into other bugs!
hlte: SM-N9005 (unlocked, GSM) and SM-N900P (Sprint)
hltetmo: SM-N900T (T-Mobile), SM-N900W8 (Canada), SM-900R4 (USA Cellular), SM-N900V (Verizon)
hltechn: SM-N9008V and SM-N9006 (both are China)
hltekor: SM-N900S (SK Telecom), SM-N900L (LG Uplus), SM-N900K (KT Corp)
The Exynos variant (ha3g) is bound to gain support soon.
The SM-N900A (AT&T) might never get support due to its locked bootloader. That is unlikely to change.
Download links:
AndroidFileHost (haggertk): [url]http://androidfilehost.com/?w=files&flid=244014[/URL]
AndroidFileHost (mine): [url]https://androidfilehost.com/?w=files&flid=245260[/URL]
OpenGApps 8.1 (biggest is mini for Note 3): [url]http://opengapps.org[/URL]
Latest bootloader & modem (contains instructions): [url]https://forum.xda-developers.com/galaxy-note-3/general/bootloader-baseband-bl-cp-samsung-t3582504[/URL]
Magisk: [url]https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445[/URL]
Source code:
LineageOS on GitHub
Contact us on Telegram if you must! [url]https://t.me/galaxynotethree[/URL]
LineageOS 16.0 (unofficial) for HLTE currently exists now! Come check out the thread by clicking [url]here.[/URL]
Credits:
The LineageOS Team
haggertk
Trader418 (started the hype back in August 2017)
Version Information:
ROM OS Version: Android 8.1 Oreo
Kernel Version: Linux 3.4.x
Let's Help the developers to fix the remaining bugs on this ROM by posting the logs of bug you encountered to this thread. And u can say how to reproduce that bug... Here are the links that might help you on how to get a logs properly...
1. https://github.com/M66B/cm-xtended/wiki/How-to-get-logs
2. https://forum.xda-developers.com/showthread.php?t=1726238
lineage-15.1-20180128-UNOFFICIAL-hltechn.zip
for Samsung Galaxy Note 3. Suitable for device with two SIM card sm n9002?
This is the first rom.
Its not tested by many people I guess.
Maybe you should even try and report?
Known bugs in hlte version (20180128) (SM-N9005):
NFC doesn't work
Can't select lock screen password, pattern or pin (if you select one, phone crashes and you have to factory reset)
Can't rotate screen
For now, this is the bugs that I've detected, at least, on my phone.
I have to say that is a VERY STABLE rom, I've been trying for one day and I hadn't got much problems, only known bugs. Xposed installed, SIM detected, Magisk installed... very good ROM.
Fantastic ROM for such an early release. Battery life is amazing. few quirks with apps not holding root, and Bluetooth audio having a hiss on SM-N900W8 nonetheless magical start for such an early bake!
Thanks for your time and support for our old Notes.
SIM CARD DON'T WORKING ON HLTE!
Sent from my Galaxy Note 3 using XDA Labs
Nice and smooth
Been running this on a Verizon note 3 running on tmo and I haven't had any hiccups yet.
banikgames said:
SIM CARD DON'T WORKING ON HLTE!
Click to expand...
Click to collapse
Its working on mine.. u probably need the latest modem and bootloaders..
almost stable. but video recording on me crush, the volume is too low. but everything is good.. ?
Ok. Can u give me link to download latest modem/bl?
Sent from my Galaxy Note 3 using XDA Labs
banikgames said:
Ok. Can u give me link to download latest modem/bl?
Sent from my Galaxy Note 3 using XDA Labs
Click to expand...
Click to collapse
look on my signature and search in general thread..
J_viix__ said:
Known bugs in hlte version (20180128) (SM-N9005):
NFC doesn't work
Can't select lock screen password, pattern or pin (if you select one, phone crashes and you have to factory reset)
Can't rotate screen
For now, this is the bugs that I've detected, at least, on my phone.
I have to say that is a VERY STABLE rom, I've been trying for one day and I hadn't got much problems, only known bugs. Xposed installed, SIM detected, Magisk installed... very good ROM.
Click to expand...
Click to collapse
No issue with lockscreen PIN code...work flawlessly
Im using n9005 hlte, i can set pattern or pin and it works perfectly. My only issue ive faced is the distortion in sound when i received a notification. Example when im playing music or videos from youtube then a notification came the notification sound was distorted for a couple of seconds then it will go back to normal.
help me
please help me
i wan't download rom
but ican't
this all in the download page
ــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
Downloads for : Samsung Galaxy Note 3
Developed By :
haggertk
Root
lineage-15.1
3 Folder(s) | 0 File(s)
Sort |
hlte [ 0 Folders | 1 Files ] Jan 28, 2018 | 06:14PM
hltechn [ 0 Folders | 1 Files ] Jan 28, 2018 | 06:20PM
hltetmo [ 0 Folders | 2 Files ] Jan 27, 2018 | 05:31AM
ــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
and i wan't to download gapps
but i wan't to know chose any one from links in post
this link in post
Quote:
Originally Posted by shivy23
Pico: open_gapps-arm64-8.1-pico-20171215-UNOFFICIAL.zip
Nano: open_gapps-arm64-8.1-nano-20171215-UNOFFICIAL.zip
Stock: open_gapps-arm64-8.1-stock-20171215-UNOFFICIAL.zip
Aroma: open_gapps-arm64-8.1-aroma-20171215-UNOFFICIAL.zip
ــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
Error message appears while flashing from twrp 3.1.1. Model N900W8
fad19 said:
Error message appears while flashing from twrp 3.1.1. Model N900W8
Click to expand...
Click to collapse
I guess u need to update to TWRP 3.2.1
How to flash without error on N900W8
Compatible for SM-N900S?
jonneldj said:
Compatible for SM-N900S?
Click to expand...
Click to collapse
If you have N900S i think you should try and report back. It's just strated
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install custom recovery
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Work
Almost all
Known Issues
- mtp buggy
Links
SM-T320
12. 20210419: april security patch: https://drive.google.com/file/d/1HkZcWDD9U7D6l_EfFjc_nZ4tHyNlNnwO/view?usp=sharing
11. 20201220: december security patch: https://drive.google.com/file/d/1QxdomNPRsng-_xpBqusRyMXurusx8QOl/view?usp=sharing
10. 20200815: august security patch: https://drive.google.com/file/d/1XAMxA7fAZs5EvBFo1429AdmRybWAIHIJ/view?usp=sharing
9. 20200724: july security patch: https://drive.google.com/file/d/1IdIzEMHrJdF2Q6H9YBcBSfigEB7-UDBf/view?usp=sharing
8. 20200614: june security patch: https://drive.google.com/file/d/1mlYZh-LP0gG8PTT-Hzp8jRC6YRhDJy62/view?usp=sharing
7. 20200523: may security patch, small sources rebuild, back mixer from t320 with video recording fix: https://drive.google.com/file/d/1Bhbk06ku5Svv8MFo3ul2PdHvgRJuErOU/view?usp=sharing
6. 20200412: april security patch, kernel update: https://drive.google.com/file/d/1YgrUvgEHy9K-igM99VAaiXM6Z1SLE3qY/view?usp=sharing
5. 20200212: latest sources, February security patch: https://drive.google.com/file/d/1pbyMFiNEYn4Wqz-N5na95tJvahj5qsju/view?usp=sharing
4. 20200114: latest sources, January security patch, rollback to our old wlan driver (if you have issues with this one - please apply wlan patch): https://drive.google.com/file/d/15cLT0Re3LA5yMLVaPNdfIkG6VCJ8oxQh/view?usp=sharing
3. 20191215: https://drive.google.com/file/d/1OmUxocOWKI2ivN7SjSMrNo-QRIy5fOAh/view?usp=sharing
2. 20191210: latest sources: https://drive.google.com/file/d/16Jfe9kss4yEOhb9sVTduWAOsTlYledmw/view?usp=sharing
1. 20191204: initial build (latest code, new wlan driver (3.8.20.24, old was 3.2.3.172)): https://drive.google.com/file/d/1wrUSp-408XmDTtglvx43jM3Zcfujebkt/view?usp=sharing
SM-T325
12. 20210419: april security patch: https://drive.google.com/file/d/1GDmT5lNQtRM_2xqNHWkvlbGP6MJA6L7U/view?usp=sharing
11. 20201220: december security patch: https://drive.google.com/file/d/1JYdx4EqrJ5Jx1Qd6odjtan5N5ex6QyVK/view?usp=sharing
10. 20200815: august security patch: https://drive.google.com/file/d/19J34mHO3KKPoAUoqIAqok52zRaznrZiE/view?usp=sharing
9. 20200724: july security patch: https://drive.google.com/file/d/1WxG7KypUh4ayWwXsNqeggjDbd4Mp_72X/view?usp=sharing
8. 20200614: june security patch: https://drive.google.com/file/d/1zHz-vAbXvHeuZK5Dg19C9pzDNtxsQexv/view?usp=sharing
7. 20200523: may security patch, small sources rebuild: https://drive.google.com/file/d/10sa_B_5Zi-dSQcSRRfDFcjXjd4_OWe6y/view?usp=sharing
6. 20200412: april security patch, kernel update: https://drive.google.com/file/d/1oqyJt94VsQupRpUH--Pb9uN0TKSpWPc_/view?usp=sharing
5. 20200212: latest sources, February security patch: https://drive.google.com/file/d/1XweMgrmDbmi7_pQPSp6PdnYyn743gnfR/view?usp=sharing
4. 20200114: latest sources, January security patch:, rollback to our old wlan driver (if you have issues with this one - please apply wlan patch): https://drive.google.com/file/d/1M6T7KN6ZOZohKFQ7pYCkqeW5SWXm2yX5/view?usp=sharing
3. 20191215: fix internal speaker, bt calls: https://drive.google.com/file/d/1UP5UtOGXBNYft0WPyth4kcSnsCAb_1YB/view?usp=sharing
2. 20191210: ril + mobile data, latest sources: https://drive.google.com/file/d/1HhfoJZP7mLWpZrqx4LO8b3P6m0Br-nVQ/view?usp=sharing
1. 20191204: initial build (latest code, new wlan driver (3.8.20.24, old was 3.2.3.172)): https://drive.google.com/file/d/1GCTDMFphXYx2MLgeLsGq6QWTA60bIJ4s/view?usp=sharing
Wlan patch
if you have wifi problems in the latest firmware - please apply wifi patch: https://drive.google.com/file/d/14qcYQrs2P1x41zz3FR8uwk4nGxlTJWcf/view?usp=sharing
Gapps
https://opengapps.org
Platform: ARM
Android: 10.0
Recovery
Use official version from:
SM-T320: https://twrp.me/samsung/samsunggalaxytabpro8.4wifi.html
SM-T325: https://twrp.me/samsung/samsunggalaxytabpro8.4lte.html
Sources
Sources: https://github.com/Lineageos
Device: https://github.com/Valera1978/android_device_samsung_mondrianwifi and https://github.com/Valera1978/android_device_samsung_mondrianlte
Kernel: https://github.com/Valera1978/android_kernel_samsung_msm8974
Vendor: https://github.com/Valera1978/android_vendor_samsung_mondrianwifi and https://github.com/Valera1978/android_vendor_samsung_mondrianlte
Thanks
Thanks to LineageOS team
Thanks to @bartekm01 for helping test SM-T325.
Congratulations to @Valera1978 - working very well on my T325
@bartekm01
Does mobile data works on this Version?
Valera1978, thanks for building Q. I don't have time to download and test Q, but will after Dec 20.
I will move from Pie to Q on that date.
Outstanding job!
Any chance of an SM-T525 build of Q?
Works amazing. I changed animation scale to .5 on all 3 options and it seems speedier and not so choppy. This tablet is still amazing, GREAT JOB Valera1978.
Another happy soul here. This build works flawlessly on T320 and can imagine it will only get better and better.
A minor bug, doesn't bother me at all though. Settings > System > Status bar > battery status style, changing to circle or text doesn't change the battery icon (vertical bar) in the status bar.
Man you are amazing !
an incredible job ....
two small problems, the battery in text format does not work and the voice synthesis is inactive.
Édit: voice synthesis ok with opengapps
dirty flash?
Did you try a dirty flash (LOS and gapps), coming from your LOS 16 version?
Except for the problem that the microphone is very quiet, LOS16 works very well.
What points should be highlighted that represent an advantage of LOS17 over LOS16?
connecting my t320 to pc with usb and choosing file sharing option makes the tablet reboot
WiFi switch on not working on my SM- T 320.
If I switch WiFi on , it changes directly back to off .
I done a Clean install .
bierma32 said:
WiFi switch on not working on my SM- T 320.
If I switch WiFi on , it changes directly back to off .
I done a Clean install .
Click to expand...
Click to collapse
??? WiFi is OK for my T320, gmail and youtube are working fine here !!
or try rebooting with all cache cleared ...
Obing said:
??? WiFi is OK for my T320, gmail and youtube are working fine here !!
or try rebooting with all cache cleared ...
Click to expand...
Click to collapse
here too all working, format data before , but no root and magisk causes error on supercell games, and lockscreen still on portrait mode when in landscape. netflix 6.26.1 works too. thanks again for all effort
Awesome tried open gapps (11/14) first but it had bugs with various features (setting icon don't work in notification pulldown), setting up lockscreen and probably a bunch of other bugs.
BitGapps seem to work good so far (although no first setup screen), overall rom is fast and smooth, it doesn't pass safetynet but not a big deal, thanks again for making this happen, amazing we have 10 on this device now.
Installed all my usual apps and no apparent issues, camera, and video also work!
Wifi (5ghz) seems very stable with new driver, and even gets better range.
OK update on the safteynet issue, I found that "Petnoire's_SafetyNet_Spoofer" Magisk module made it pass both checks and also the play certification (tried some of the other modules but they failed to make it pass).
You can either use his stock module (which will set it to a xiaomi device fingerprint) or use my modification (which will make it a SM-T320), I only modified it to use the correct build fingerprint for this tablet, so yea rom is fully awesome now
(after installing the module and rebooting , don't forget to force stop the playstore and clear both cache and storage)
this might also work on the Android 9 rom too, but I have only tested it on 10 so far.
Not working on latest build: will see if I can fix.
T325 full wipe + Data format.
TWRP 3.3.1-0 (without EFS backup option although found acc to recovery log of LOS 13) to flash ROM, BitGapps + Magisk gave an error 1 for Magisk.
Had to flash it separately to get it working.
Started without logon screen to Google which was fine for me.
IMEI + SIM gone and no mobile data.
With Odin 3.13. back to Stock -> got my IMEI back with mobile data as well.
Reflashed TWRP + LOS17 gapps and, in a second flash, Magisk.
WiFi is fine but again neither SIM nor mobile data.
EFS partition still existing.
Am not able to install saved apps with totalcammnder although it's a secure source.
Always telling me it can't open the file even the freshly downloaded XDA-labs.apk.
Installations from Playstore and F-Droid working.
bierma32 said:
@bartekm01
Does mobile data works on this Version?
Click to expand...
Click to collapse
No. RIL not worka at this moment
bierma32 said:
WiFi switch on not working on my SM- T 320.
If I switch WiFi on , it changes directly back to off .
I done a Clean install .
Click to expand...
Click to collapse
I also have the same problem with my SM-T320 after a clean install. My WiFi just doesn't want to turn on.
@Valera1978 can anything be done about the microphone volume? I record video but can barely hear anything on playback.
Screencast/Miracast is also broken system softreboots when trying to connect., not sure if these are fixable but just thought id let you know
.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Crab Experience V1.7 for Galaxy A8
Made by TeamCrab (Github @TeamCrab)
Experience whole new world
Introduction:
(This may have an Some bugs, Because Its my first Custom ROM Made with an Samsung's Stock Firmware. and i am bad at english. as you can see, i can't use grammer. I am currently learning an Grammer.
I am a korean and i am student. that means i have to learn more and that means i don't have an many time to do development. The Update may late.)
Do you want to downgrade to Samsung Experience?
Do you want the Samsung Experience?
If you can back to samsung experience, do you will back to Samsung Experience?
Then, This may be a good choice for you!
This is the stock rom from samsung and we got the stock rom of android 8.0 from A530N. and when we got official rom of A530N (Galaxy A8 2018) We made this rom with making a project. and that project name is the "Crab". And Thats the start of Crab Experience.
How to Download?
We uploaded the Crab Experience V1.5 in MEGA and You can use it for Free. I was not spended many times for developing this ROM Because This is an Stock ROM. Here is the Link:
Developer Edit: Removed Download link because its deprecated. To be continued in Project Samsu..
Test Some Early Releases and Feedback My Early Release!
Shh... This is the Secret Early Releases only opened for XDA Users.. If you want to test some new features, We think the Early Release is not bad for you!
The Early Release may not Stable for Your Device. We need more fixes for Early Release, So We need your feedbacks. The Feedbacks makes Early Release is stable for Device.
No more things today! there is not have to test it. We'll send you a notification if the beta test is started!
---------------------------------------------------------------------------------------------------------------------------
How to Install Early Release
1. Odin 3.14.4
2. Samsung Driver for Smart Devices
3. TWRP for jackpotlte: https://twrp.me/samsung/samsunggalaxya82018.html#google_vignette
4. Flashable Crab Experience
5. Magisk or SuperSU for Enable Boot
So Thats all. lets continue to manual!
Before Start this..
Please Enable the OEM Unlock in Device's Developer Mode and Enable an USB Debugging in Developer Mode.
If you disable OEM Unlock and If you flash the TWRP then Your Device may get bricked. So Please, Before do it, UNLOCK OEM AND ENABLE USB DEBUG PLEASEEEEEEEE
0. Press Volume Button's Middle + Power Button (In A530N Volume Down + Power is Not works and This method works in A530N. If you're A530F or A530W then it may have other method to boot to bootloader.)
1. Extract the Odin and Download the TWRP, Flashable ZIP, Samsung Driver
WARNING: If you extract Flashable ZIP File You can't Flash the Device Because TWRP Only Allows to Flash .zip and .img Format Files.
2. Open the Odin and Select TWRP We downloaded at the Partition Named "AP"
If you ready, Click the Start button and Flash the Recovery to Device.
3. If the Device Reboots, Get into Recovery with a Volume Up + Power Button
4. If the TWRP Screen Appears Swipe the Bar. The Message in the TWRP Screen is nothing effective.
(Optional) Wipe System, Data, Dalvik, Internal Storage and Cache for Clean Install. If the Device includes the important files, please select dirty install. Dirty Install just updates device like OTA from Official Samsung Update.
5. Flash the System (Crab) First and After Flashed System Flash the Magisk or SuperSU for Patch Boot Kernel.
--------------------------------------------------------------------------------------------------------------------------
If The Link broke, Please Comment. We'll check Is Link has broken and We'll fix it!
Changelogs:
Heres the Update Logs we made. we don't have any monehs lol so i just made with google sites and it will like trash but we are okay because you're thinking right well we'll add an update notes
Team Crab
March 31, 2022 FixesBuild Number: did:knox:26:SPE_80_711b469aa76840b7a3f72fe38e7f6d1784378a2891f14999aa538d15db93602b - Team Crab format Build Number Security Level PatchedSecurity Level is improved to 2020-12-01, This update will be last update. Build Number Changed that get displayedThis
sites.google.com
Please Read This!
DEPRECATED
This ROM's Development is Deprecated and We should not keep this project. This project is now closed. Thanks for testing This ROM. (To be countinued in Project Samsu. To Download, Visit here... https://samsu.xyz)
Developments are done (No more fixes) But for the personal use MEGA Link will be not deleted. I will upload a some screenshots that i worked on DarkOreo, DarkPie, DarkNougat in here after the 1 months
Thread reopened.
Badger50 said:
Thread reopened.
Click to expand...
Click to collapse
Hello Staff and Thanks for reply. We checked the Thread has reopened. Thanks for Reopening My Thread Again We found an Problem and we uploaded the fixed firmware.
i used rom for a530n device and found it quite stable (beta version)
Hi.
Do you know if it still has Mirrorlink available in this rom?
Thank you
knd said:
Hi.
Do you know if it still has Mirrorlink available in this rom?
Thank you
Click to expand...
Click to collapse
Hello! Thanks for waiting the Reply. We checked Mirrorlink has available in Previous Android! Mirrorlink was renamed to Smart View. So If you want to use mirrorlink then, please use the smart view at notibar. Thank you.
cuongnguyen2906 said:
i used rom for a530n device and found it quite stable (beta version)
Click to expand...
Click to collapse
Thank you for your reply! If you find some errors, please report it here Thanks for using Team Crab!
Hello Brother! I am the Team Perl! I am so surprised with your work. We Tested on A8 Beta and It worked stablly!
Be a awesome adventure!
Sincerely,
Team Perl
ShinyPerlTwentyTwo said:
Hello Brother! I am the Team Perl! I am so surprised with your work. We Tested on A8 Beta and It worked stablly!
Be a awesome adventure!
Sincerely,
Team Perl
Click to expand...
Click to collapse
Hey Team Perl! We are so glad because you are here. Wanna Work it together on Crab? We don't have many developers for development of Crab.
Hai! Nice works bro. Btw, I'm try install your works, but get stacked on Samsung Galaxy A8 logos. My device is A530F, did you know why ?
Envy_ said:
Hai! Nice works bro. Btw, I'm try install your works, but get stacked on Samsung Galaxy A8 logos. My device is A530F, did you know why ?
Click to expand...
Click to collapse
You have to install an Patched boot.img, That means you have to patch boot image with a Root like Magisk or SuperSU. Try it again, it works normally if you install Root. Btw, We are currently fixing an Boot.img Patch error with using a Magisk's Boot Image Patch Script.
(Sorry for being late Envy_!)
TwentyTwentyTwo said:
You have to install an Patched boot.img, That means you have to patch boot image with a Root like Magisk or SuperSU. Try it again, it works normally if you install Root. Btw, We are currently fixing an Boot.img Patch error with using a Magisk's Boot Image Patch Script.
(Sorry for being late Envy_!)
Click to expand...
Click to collapse
Woahhhh, okay, I'll try it soon. Thanks. Btw, can't wait for the next update. Fighting!!
Envy_ said:
Woahhhh, okay, I'll try it soon. Thanks. Btw, can't wait for the next update. Fighting!!
Click to expand...
Click to collapse
Thanks for reply! WE WILL WORK HARD FOR CRAB! THANKS!
Envy_ said:
Woahhhh, okay, I'll try it soon. Thanks. Btw, can't wait for the next update. Fighting!!
Click to expand...
Click to collapse
Thanks for waiting update! the early release is released to every XDA Users with a ZIP format (not a zip.lz4) and the new early release includes the Patched Boot.img!
The firmware is super, but it is possible to somehow remove duplicate items from the settings.
Samuraj89 said:
The firmware is super, but it is possible to somehow remove duplicate items from the settings.
Click to expand...
Click to collapse
Agreed!! Korean samsung phone with mobile operator so many bloatware, maybe you can deblot that @TwentyTwentyTwo
Samuraj89 said:
The firmware is super, but it is possible to somehow remove duplicate items from the settings.
Click to expand...
Click to collapse
Thanks for reply! We're currently thinking to base on A530F for debloat the Service Operator menu.
Envy_ said:
Agreed!! Korean samsung phone with mobile operator so many bloatware, maybe you can deblot that @TwentyTwentyTwo
Click to expand...
Click to collapse
Yep thanks for the reply, and we're currently thinking to base on A530F for debloat the Service Operator menu, i hate that menu too lol
TwentyTwentyTwo said:
View attachment 5533425
Crab Experience V1.7 for Galaxy A8
Made by TeamCrab (Github @TeamCrab)
Experience whole new world
Introduction:
(This may have an Some bugs, Because Its my first Custom ROM Made with an Samsung's Stock Firmware. and i am bad at english. as you can see, i can't use grammer. I am currently learning an Grammer.
I am a korean and i am student. that means i have to learn more and that means i don't have an many time to do development. The Update may late.)
Do you want to downgrade to Samsung Experience?
Do you want the Samsung Experience?
If you can back to samsung experience, do you will back to Samsung Experience?
Then, This may be a good choice for you!
This is the stock rom from samsung and we got the stock rom of android 8.0 from A530N. and when we got official rom of A530N (Galaxy A8 2018) We made this rom with making a project. and that project name is the "Crab". And Thats the start of Crab Experience.
How to Download?
We uploaded the Crab Experience V1.5 in MEGA and You can use it for Free. I was not spended many times for developing this ROM Because This is an Stock ROM. Here is the Link:
File on MEGA
mega.nz
Test Some Early Releases and Feedback My Early Release!
Shh... This is the Secret Early Releases only opened for XDA Users.. If you want to test some new features, We think the Early Release is not bad for you!
The Early Release may not Stable for Your Device. We need more fixes for Early Release, So We need your feedbacks. The Feedbacks makes Early Release is stable for Device.
This Early Release Includes:
Team Crab Version Checker Added - It includes in System files so you are only able to disable apps, not a delete apps but it may look trash because i am new at creating apps with a kotlin from android studio lol
New Build Number Builded - New Build Number is generated from One UI Base and the build prop and updater script tweaks New Build Number into the system
Security Level Upgraded - the Security Level is Upgraded from SU2 to SUC (SU13) but its only the build prop tweaks and it is uneffective to flash roms you can still flash the Android 9.
Boot Image Patched - Now, you don't need to root, Because the Boot image was patched with Magisk! Boot Image is modded with Magisk and meaning the boot image includes magisk manager.
Build Number: A530NXSUCBVCC
File on MEGA
mega.nz
---------------------------------------------------------------------------------------------------------------------------
How to Install Early Release
1. Odin 3.14.4
2. Samsung Driver for Smart Devices
3. TWRP for jackpotlte: https://twrp.me/samsung/samsunggalaxya82018.html#google_vignette
4. Flashable Crab Experience
5. Magisk or SuperSU for Enable Boot
So Thats all. lets continue to manual!
Before Start this..
Please Enable the OEM Unlock in Device's Developer Mode and Enable an USB Debugging in Developer Mode.
If you disable OEM Unlock and If you flash the TWRP then Your Device may get bricked. So Please, Before do it, UNLOCK OEM AND ENABLE USB DEBUG PLEASEEEEEEEE
0. Press Volume Button's Middle + Power Button (In A530N Volume Down + Power is Not works and This method works in A530N. If you're A530F or A530W then it may have other method to boot to bootloader.)
1. Extract the Odin and Download the TWRP, Flashable ZIP, Samsung Driver
WARNING: If you extract Flashable ZIP File You can't Flash the Device Because TWRP Only Allows to Flash .zip and .img Format Files.
2. Open the Odin and Select TWRP We downloaded at the Partition Named "AP"
If you ready, Click the Start button and Flash the Recovery to Device.
3. If the Device Reboots, Get into Recovery with a Volume Up + Power Button
4. If the TWRP Screen Appears Swipe the Bar. The Message in the TWRP Screen is nothing effective.
(Optional) Wipe System, Data, Dalvik, Internal Storage and Cache for Clean Install. If the Device includes the important files, please select dirty install. Dirty Install just updates device like OTA from Official Samsung Update.
5. Flash the System (Crab) First and After Flashed System Flash the Magisk or SuperSU for Patch Boot Kernel.
--------------------------------------------------------------------------------------------------------------------------
If The Link broke, Please Comment. We'll check Is Link has broken and We'll fix it!
Changelogs:
Heres the Update Logs we made. we don't have any monehs lol so i just made with google sites and it will like trash but we are okay because you're thinking right well we'll add an update notes
Team Crab
March 31, 2022 FixesBuild Number: did:knox:26:SPE_80_711b469aa76840b7a3f72fe38e7f6d1784378a2891f14999aa538d15db93602b - Team Crab format Build Number Security Level PatchedSecurity Level is improved to 2020-12-01, This update will be last update. Build Number Changed that get displayedThis
sites.google.com
Please Read This!
Sorry for being late update, We're currently working on new pc. Because, We moved from the Old PC and while moving my pc's hardware was not worked normally so my hard drive was got destoried. Well, we have to download it Firmware again. Please Help us!
TMI: My PC is not using Windows Anymore, My PC is Now using Rectify11 V2.5 so it may not compatible with a program that makes an Custom Firmware i use lol so it may be a late update
Problem:
We checked the software won't boot to System if you not rooted with magisk or SuperSU. We'll check how to fix to boot system without root.
Google apps are too old and YouTube not works because YouTube is old too.
Early Release Problems:
We don't know why, a build we are currently testing is not works normally it stops in setup wizards (its stock boot image, not a modded. we are thinking to stop a project now.. its impossible to fix it because its a system's problem.)
Click to expand...
Click to collapse
work on A530F?