Database Info

[ROM][UNOFFICIAL] LineageOS 14.1 for Galaxy S4(GT-I9515)

// Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
// Info
It's unnoficial LineageOS14.1 for Galaxy S4 Value Edition (GT-I9515).
I strongly recommend to perform a backup of your current rom before installation.
// Install
Recommend: Rooted device with custom recovery like (TWRP 3.X.X)
Installation process from stock rom
Build from xx.xx. and Gapps from xx.xx. to the external SD
Installation Procedure :
coming from stock ....
TWRP - Odin flashable (I use Odin 3.12)
01. I take the battery out now, then battery in again and off into the download mode.
02. flash TWRP with Odin (comes in AP). The hooks at Auto Reboot and F. Reset Time out.
03. disconnect USB cable after flash, battery out and in again.
04. boot into recovery -> Allow Modifications
05 Advanced Wipe: Dalvik/ART Cache, System, Data, Internal Storage, Cache (lasts a while)
06. install -> select lineage image, then add more zips and gapps, then flash
07. patching system image unconditionally runs through with progress bar
08 Open Gapps are flashed, progress bar runs through
09. when done, tap reboot system, Swipe to install TWRP app (or not, if you don't need it)
10th reboot
11. Lot 14.1 boots. (quite a while ^^)
12. type through the facility
13. ready
- make a full Backup from your device
- Full wipe device (system, data, cache, dalvik)
- Install your Build
- Install Gapps (ARM Pico or Nano)
- Wipe Cache and Art/Dalvik
- Reboot
- Wait for 1st boot
- Enjoy
install magisk from here
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
LineageOS Extras
- addonsu-14.1-arm-signed.zip
- addonsu-remove-14.1-arm-signed.zip
*for those who have problems with the automatic update
*automatic update for Galaxy S4 Jfvelte (GT-I9515)
// Partners & Friends for German
https://android-freaks.de/forum/thread/47-rom-unofficial-samsung-galaxy-s4-gt-i9515-lineageos-14-1/
// OTA
https://www.los-legacy.de/14.1/jfvelte
update: monthly
// TWRP 3.1.1.0/Baseband-Bootloader
https://www.androidfilehost.com/?w=files&flid=143398
// TWRP 3.2.3.0/Baseband-Bootloader
[RECOVERY][OFFICIAL] TWRP 3.2.3-0 [jfvelte]
// Thanks / Credits
Code:
* CM team, Omni team
* XDA developers
* Everyone who has contributed to CM on S4
* syphyr and NucWin for their previous work
* Many thanks to invisiblek
//Info Exodusnick is currently taking over Benlue work
Code:
[B][U]!!!since some users have already asked me about new features!!![/U][/B]
Since it is a pure Lineageos version.
and not as optimized as e.g. side build.
All I do is keep your phone up to date.
and if errors occur, they are fixed after each update
[B][U]I hope you understand that I don't make any changes to the version
[/U][/B]
// Donate Us
PayPal.Me
// Source Code
Framework: LineageOS
Kernel: jfvelte-dev
XDA:DevDB Information
[ROM][UNOFFICIAL] LineageOS 14.1 for Galaxy S4 (GT-I9515), ROM for the Samsung Galaxy S4
Contributors
BenLue, Exodusnick
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2019-09-19
Created 2017-01-08
Last Updated 2020-07-25

Reserved

Reserved

thanks <3

Great work, but no sim detected..

Thank you :good:
Thank you @BenLue for keeping device updated (alive).
God bless you.

is possible Dirty Unicorns 11? is the best rom

gasc said:
is possible Dirty Unicorns 11? is the best rom
Click to expand...
Click to collapse
Please contact Dirty Unicorns 11 Dev´s
Greetings
Ben

All works or there are some bugs?
Thanks!!!

mickdroid94 said:
All works or there are some bugs?
Thanks!!!
Click to expand...
Click to collapse
Yes, it have not sim detected error.

hknsvm said:
Great work, but no sim detected..
Click to expand...
Click to collapse
Uhm sorry for this Issue, i cant reproduced the No Sim Detected Error!
Please make sure:
Rom Clean install
your Sim Card Slot is clean
Greetings
Ben

BenLue said:
Uhm sorry for this Issue, i cant reproduced the No Sim Detected Error!
Please make sure:
Rom Clean install
your Sim Card Slot is clean
Greetings
Ben
Click to expand...
Click to collapse
Thank you
I tried but it have same problem.
No problem when installing another rom

BenLue said:
Uhm sorry for this Issue, i cant reproduced the No Sim Detected Error!
Please make sure:
Rom Clean install
your Sim Card Slot is clean
Greetings
Ben
Click to expand...
Click to collapse
:crying: BUG >
No Sim Detected > baseband unknown

I will give it a try and report if there's a SIM bug or not.
E: Didn't work, now I'm going to try the ROM by sombree

droidfuture said:
:crying: BUG >
No Sim Detected > baseband unknown
Click to expand...
Click to collapse
Its possible to test an different Baseband?
Greetings

unimetal said:
I will give it a try and report if there's a SIM bug or not.
E: Didn't work, now I'm going to try the ROM by sombree
Click to expand...
Click to collapse
I use sombree rom, The rom good work but have some bugs. Sometimes doesn't work camera..

BenLue said:
Its possible to test an different Baseband?
Greetings
Click to expand...
Click to collapse
yes, tested >
ANJ1 4.4.2
BOJ1 5.0.1
BPI1 5.0.1
ANC1 4.4.2
All Wipes.
My model has L without end
GT-i9515L Is that it?

droidfuture said:
yes, tested >
ANJ1 4.4.2
BOJ1 5.0.1
BPI1 5.0.1
ANC1 4.4.2
All Wipes.
My model has L without end
GT-i9515L Is that it?
Click to expand...
Click to collapse
droidfuture, -> GT-I9515L <- is not GT-I9515 (Jfvelte) Value Edition

This thread is in the wrong xda section. It should be in i9515 instead of i9505.

lineage-14.1-20170109-UNOFFICIAL-jfvelte.zip

[ROM][7.1.2] AOSPA Paranoid v7.3.1 for Honor 6x

Paranoid Android is a custom ROM aiming to extend the system, working on enhancing the already existing beauty of Android and following the same design philosophies that were set forward by Google for Android Open Source Project.
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Compatible device?:
Code:
[LIST]
[*]All devices that use hi6250 chipset and use kernel 4.1.
[/LIST]
Mandatory:
* hit thank buttons, it's free.
* want more roms for P8 Lite 2017/P9 Lite 2017, simply bring me up beers by the following button.
Requirements:
TWRP.
Unlocked bootloader.
Unlocked FRP.
vendor.img: you must be on stock one, so don't wipe it because with other custom vendor.img will never ever boot.
This ROM is provided by CodeOfHonor​
Installation Guide:
Make sure to the stock backup saved on pc, I'm not responsible for any bricked or damage.
Reboot to TWRP.
Go to Wipe.
Choose Advance Wipe.
Check on Data and change file system to EXT4, will not ever boot with F2FS.
Wipe cache, data, dalvik and system.
Flash the rom.
Reboot and have fun then.
Working:
Audio.
Bluetooth.
Camera: it's fully works with stock or other apps .
Display.
Graphis: both gralloc & hwcomposer.
Lights.
NFC.
RIL.
Sensors.
Storages.
Wifi
Bugs:
Dual sim might will not work all variants, so don't waste your time by asking me to fix it.
You don't like it?, easy revert to Emui 5.x.
Downloads:
**13/05/2018**
pa_hi6250-7.3.1-EOL-20180513.zip|500.4 MB
Changelogs:
**13/05/2018**
Boot with F2FS without problems.
Fix Magisk.
Source Code:
Device Tree:
https://github.com/codeofhonor-dev/android_device_huawei_hi6250
Kernel GPL:
https://github.com/codeofhonor-dev/android_kernel_huawei_hi6250
Vendors:
https://github.com/codeofhonor-dev/android_vendor_huawei_hi6250
XDA:DevDB Information
AOSPA Paranoid for Hi6250, ROM for the Honor 6X
Contributors
haky 86, HassanMirza01, felix-development
Source Code: https://github.com/codeofhonor-dev, Meticulus and the stuff of CodeOfHonor.
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: Emiui 5.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 7.3.1
Stable Release Date: 2018-04-27
Beta Release Date: 2018-04-27
Created 2018-04-27
Last Updated 2018-04-27

ROM stuck at animation boot?
this because you must change the file system from F2FS to EXT4 to done boot process
* reboot to TWRP.
* go to Wipe -> Advanced Wipe.
* check Data -> Change file system -> select EXT4.
* swipe the screen to wipe it .
How can I fix Sim?
* go to Settings -> Extras -> disable "Sim Card Slot2 " and reboot.
How can I enable Google Codecs
* go to Settings -> Extras -> enable "Use Google H264" (it's a bit laggy but better than nothing).
How to enable Double Touch To Wake?
* go to Settings -> Extras -> enable "Double Touch to Wake"
Should I reflash the vendor partition if come from other roms?
* if you coming from Emui 5.x, the answer is no because the custom rom are based on Emui 5.0 source code, so all you
have to is flashing your favorite custom rom
Audio and camera are not working?
* bring up a logcat to help us, instead of writing useless comments.
I got error 7, how can I fix that?
* use my own TWRP recovery. or you can simply remove the whole assert line in the updater-script file inside the META-INF folder save and re-flash.
How can I fix RIL Crashes
flash root.
Copy the phone.prop into /system/vendor and /vendor.
reboot, now you should able to do calls for more than 2 minuts
Calls still crash even with fix SIM
Run adb shell and type the following command xxd /sys/firmware/devicetree/base/hisi,modem_id .
the result will be something like the following out ( for single sim devices):
1|hi6250:/ $ xxd /sys/firmware/devicetree/base/hisi,modem_id
00000000: xxxx x000 ;xx.
Click to expand...
Click to collapse
Search for your xxxxx000, and setup the following flags .
ro.config.client_number=1
ro.config.modem_number=1
persist.dsds.enabled=false
persist.radio.multisim.config=dsds (remove it properly)
for dual sim devices just edit these 2 flags:
ro.config.client_number=1
ro.config.modem_number=1
Save and reboot.

I'm coming from EliteRom 7.5 and I love AOSPA but there are 2 little problems I have with this rom.
First of all fingerprint doesn't work correctly, no matter how often I press my finger on the sensor it stays at the ~10% mark.
The other problem is that I don't know how to root this rom. I tried installing magisk manager and flashing the zip but I get error 1 in TWRP.
Except this issues it's working very nicely on my device.
Thanks in advance for helping me out

MadMurl0c said:
I'm coming from EliteRom 7.5 and I love AOSPA but there are 2 little problems I have with this rom.
First of all fingerprint doesn't work correctly, no matter how often I press my finger on the sensor it stays at the ~10% mark.
The other problem is that I don't know how to root this rom. I tried installing magisk manager and flashing the zip but I get error 1 in TWRP.
Except this issues it's working very nicely on my device.
Thanks in advance for helping me out
Click to expand...
Click to collapse
10% mark?
Did you entirely remove all the fingerprints before flashing this Tom?
Go back to Elite or Stock, remove all fingerprints and reinstall the Rom
For Root, you can try changing recovery or using an older version of Magisk that worked for you

I am currently reverting back to stock and will try to flash the rom again, I guess I didn't remove the fingerprints before flashing.
I tried Magisk Version 15 and 16 which both worked on EliteRom, I even tried SuperSu which didn't gave me an error message in twrp but It didn't work tho. After flashing the zip there was no "SuperSu" App so I downloaded it from the playstore, the app told me "root not found". Do you know what the cause of this could be?
Edit: Fingerprints are working now But root still doesn't

After I downgrade from emui 8 to emui 5 in 5 minutes now I can fix this rom so expect a build within these days

hoping to try this rom , following for updates

Hey guys I just installed the rom, but I did notice that I don't have access to any Gapps. How to I install them? I'm using TWRP. I was just able to get my unlock code from Honor today, so I unlocked and rooted, and flashed your rom as the first thing, so I'm running a fresh flash of the latest version.

Flash package with Twrp: https://opengapps.org/

Thanks guys, I realized that yesterday right after I posted lol. So far I'm really loving the plain stock-ness of this rom, hopefully it give the device some more life so I won't have to upgrade soon.

MadMurl0c said:
I am currently reverting back to stock and will try to flash the rom again, I guess I didn't remove the fingerprints before flashing.
I tried Magisk Version 15 and 16 which both worked on EliteRom, I even tried SuperSu which didn't gave me an error message in twrp but It didn't work tho. After flashing the zip there was no "SuperSu" App so I downloaded it from the playstore, the app told me "root not found". Do you know what the cause of this could be?
Edit: Fingerprints are working now But root still doesn't
Click to expand...
Click to collapse
Yeah I'm having the same issue to, with no root.

Can someone tell me why this rom is different to all others ? Why is this one using stock vendor and can we easy revert to Emui ? Why don't all others ?
I'm on stock now.

How is the quality of the photos compared to stock rom? It is possible to install Emui camera or other huawei cameras?

** Note **
developments of hi6250 is end reason: switch to another phone, have phone.

** Note **
Developments for hi6250 has been resumed but just for this ROM, sorry for the inconvenience.
I'm already downloading the source for releasing new build but AOSPA will take a wile since have bigger source.

** Note **
Downloads:
**13/05/2018**
pa_hi6250-7.3.1-EOL-20180513.zip|500.4 MB
Changelogs:
**13/05/2018**
Boot with F2FS without problems.
Fix Magisk.

Had anyone tried installing Xposed yet?

Support BLL version? Honor 6X

The rom overall is great and smoorh, even F2FS works now
But somehow magisk still doesn't work. It says
Code:
! System installed root detected, mount rw :(
when I try to flash the magisk.zip file.

MadMurl0c said:
The rom overall is great and smoorh, even F2FS works now
But somehow magisk still doesn't work. It says
Code:
! System installed root detected, mount rw :(
when I try to flash the magisk.zip file.
Click to expand...
Click to collapse
Guys to flash magisk or superSU use Meticulus TWRP, other twrp like eliteTwrp show an error when it is recompilling the boot.img

[ROM][5.1.1][SM-J100H] CyanogenMod 12.1 for Samsung Galaxy SM-J100H

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (LP), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
Wifi (connection, tethering, etc)
Bluetooth (need quick patches in download link)
Camera, video codecs
RIL (Calls, SMS, mobile data)
Storage (both internal and external)
MTP storage (both internal and external)
Offline charging
zRAM (compressed-RAM swap)
GAPPS
Tethering (USB, Wifi, Bluetooth)
GPS
Sound recording
Torch (flashlight)
BUGS/Not working:
Laggy recorded videos. In this case, use MX Player, choose SW codecs when you play these videos, they will become normal
Switching to other fonts will get bootloops after restart. In this case, if you use TWRP recovery, go to File Manager >> delete "themes" from /data/system would help you escape this without factory reset
First time installing CyanogenMod 12.1 to your Galaxy , or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended)
Quote:
DOWNLOADS:
ROM: Link
CHANGELOG
Code:
- 2016/06/25
+ Initial release, ported from Galaxy V's CM12.1
- 2016/06/27
+ Switched to built-from-source, no more portings
+ Fixed nearly all problem, except fonts
+ Underclocked to 1,2GHz for stable usage
+ Enable multi-threaded dex2oat >> Faster app installation
+ Fixed installation for some apps (FB, etc...)
Want some screenies? Get them from Screenshot tab
XDAevDB Information
CyanogenMod 12.1, ROM for the Samsung Galaxy
Contributors
Erwin Abs
Source Code: https://github.com/jnkcode/android_kernel_samsung_j13g/tree/cm-12.1
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2016-06-27

???

always says SETUP WIZARD HAS STOPPED

- works stable
- issues with WiFi and Bluetooth. WiFi cannot connect - you have to enter the same password multiple times when connecting for the first time. Then it keeps failing to connect from time to time
- more laggy than stock rom and resurrection remix
- installation is very straightforward
Thanks for sharing this rom. Lots of good work.

Lord87 said:
- works stable
- issues with WiFi and Bluetooth. WiFi cannot connect - you have to enter the same password multiple times when connecting for the first time. Then it keeps failing to connect from time to time
- more laggy than stock rom and resurrection remix
- installation is very straightforward
Thanks for sharing this rom. Lots of good work.
Click to expand...
Click to collapse
Try this https://androidfilehost.com/user/?w=settings-dev-files&flid=205876

CyanogenMod 12.1 for SM-J100H with dual SIMs
Thanks for posting this ROM, gave me a chance to test in on a SM-J100H with dual sims: flashed the ROM, the fix and then gapps. Was thinking not to have gapps but an app was requiring Google Play services.
Setup Wizard stopped several times after reboot, worked around it by restarting the phone. Mobile connection was unstable for both sims and kept dropping, overall performance was slow, especially when in Settings. Not sure if RAM on this phones can be upgraded, mentioning it since free memory was scarce.
As noted by another user WIFI setup had to be repeated for it to stick, good work for keeping it simple thu.

c0mpus3rvef said:
Thanks for posting this ROM, gave me a chance to test in on a SM-J100H with dual sims: flashed the ROM, the fix and then gapps. Was thinking not to have gapps but an app was requiring Google Play services.
Setup Wizard stopped several times after reboot, worked around it by restarting the phone. Mobile connection was unstable for both sims and kept dropping, overall performance was slow, especially when in Settings. Not sure if RAM on this phones can be upgraded, mentioning it since free memory was scarce.
As noted by another user WIFI setup had to be repeated for it to stick, good work for keeping it simple thu.
Click to expand...
Click to collapse
yeah i think ram 512 for now is not good especially with gapps that are constantly updating, i think you should buy a new handphone
Let's go join to Redmi 5A

Erwin Abs said:
yeah i think ram 512 for now is not good especially with gapps that are constantly updating, i think you should buy a new handphone
Let's go join to Redmi 5A
Click to expand...
Click to collapse
Totally agreed, it has limitations due to small RAM and older technology. am using my SM-J100H learning about behavior of various custom ROMs. Please bear with me, one observation when using Bluetooth, it said SM-G360H, perhaps not significant. was able to transfer files and use an app that required Bluetooth connection. Just curious if this could cause slow response time. Thanks again.

c0mpus3rvef said:
Totally agreed, it has limitations due to small RAM and older technology. am using my SM-J100H learning about behavior of various custom ROMs. Please bear with me, one observation when using Bluetooth, it said SM-G360H, perhaps not significant. was able to transfer files and use an app that required Bluetooth connection. Just curious if this could cause slow response time. Thanks again.
Click to expand...
Click to collapse
Will it work with the Sm-j100FN?

ugur30 said:
Will it work with the Sm-j100FN?
Click to expand...
Click to collapse
totally different hardware so NOPE

Donwload

Erwin Abs said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (LP), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
Wifi (connection, tethering, etc)
Bluetooth (need quick patches in download link)
Camera, video codecs
RIL (Calls, SMS, mobile data)
Storage (both internal and external)
MTP storage (both internal and external)
Offline charging
zRAM (compressed-RAM swap)
GAPPS
Tethering (USB, Wifi, Bluetooth)
GPS
Sound recording
Torch (flashlight)
BUGS/Not working:
Laggy recorded videos. In this case, use MX Player, choose SW codecs when you play these videos, they will become normal
Switching to other fonts will get bootloops after restart. In this case, if you use TWRP recovery, go to File Manager >> delete "themes" from /data/system would help you escape this without factory reset
First time installing CyanogenMod 12.1 to your Galaxy , or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended)
Quote:
DOWNLOADS:
ROM: Link
CHANGELOG
Code:
- 2016/06/25
+ Initial release, ported from Galaxy V's CM12.1
- 2016/06/27
+ Switched to built-from-source, no more portings
+ Fixed nearly all problem, except fonts
+ Underclocked to 1,2GHz for stable usage
+ Enable multi-threaded dex2oat >> Faster app installation
+ Fixed installation for some apps (FB, etc...)
Want some screenies? Get them from Screenshot tab
XDAevDB Information
CyanogenMod 12.1, ROM for the Samsung Galaxy
Contributors
Erwin Abs
Source Code: https://github.com/jnkcode/android_kernel_samsung_j13g/tree/cm-12.1
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2016-06-27
Click to expand...
Click to collapse
A Bugs / Or My phone?
Device : J100H
Bugs (maybe) : Cant Connect To A Wifi (It Saying Cant Connect On This Network)
I Dont Know Its My Phone Or The ROM Sooo? Help

1.Thank You For The Information
2. I Already Know It,After Installing Lineage OS 14.1 (Nougat,Still Didn't Know IS THe ROM Ported Or Not But THe Wifi Works So I Used It (And Installing Family Link Bc That Phone I Will GIve It To My Lil Bro)
3.It Slow af

[ROM][Official][Nightly] LineageOS 16.0 for OnePlus 3/3T

LineageOS is a free, community built, aftermarket firmware distribution of Android 9.0 (Pie), which is designed to increase performance and reliability over stock Android for your device.​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Important information:
This thread is for LineageOS 16.0 builds for OnePlus 3/3T. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Tips:
You need at least OxygenOS 9.0.2 firmware, otherwise you'll get error 7 when installing the zip. Latest firmware is recommended.
Installation:
First time flashing LineageOS 16.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery (Official TWRP 3.3 or higher is highly recommended: https://twrp.me/oneplus/oneplusthree.html)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Optional: Install the Google Apps addon package
Reboot
Source code:
https://github.com/lineageos
Credits:
LineageOS Team & Contributors
Code Aurora Forum
......
Download:
Official: https://download.lineageos.org/oneplus3
Last unofficial: https://androidfilehost.com/?fid=1395089523397903569
XDA:DevDB Information
LineageOS, ROM for the OnePlus 3
Contributors
dianlujitao
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
Version Information
Status: Beta
Created 2018-11-13
Last Updated 2019-08-12

Reserved
Changelog:
2018.11.13:
Initial release
2018.11.17:
Sync latest source
Fixed directly reboot to recovery when attempting to enter power on password when secure boot enabled
Downgraded kernel to LA.UM.7.5.r1-02500-8x96.0 due to CAF stability regression, but there's still a race condition which could cause random kernel panic, especially when attempting to wake up the device, I'm still debugging on this.
Improved GPS performance
Minor bug fixes
2018.11.29:
Sync latest source
Kernel baseline updated to LA.UM.7.6.r1-03600-89xx.0
Thanks to a clue provided by @markakash , the "random kernel panic on wake up" issue seems to be fixed now. The ROM is probably stable enough for daily use, so I call it "beta" instead of "alpha" now. Please report if you still have the issue.
Minor bug fixes
2018.12.02:
Sync latest source
IMS experiments, VoLTE is confirmed working, VoWiFi is untested
Battery life optimization
Fix fingerprint sensor not respond on first boot and after user switched
Minor bug fixes
2018.12.05:
Sync latest source
SELinux enforcing for now, let me know if there're any regressions
Minor bug fixes
2018.12.15:
Sync latest source
Fix some suspend issue
Kernel baseline updated to LA.UM.7.5.r1-03700-8x96.0
Minor bug fixes
2018.12.22:
Sync latest source
Slider key fix by @nvertigo67
App launch boost & touch boost, hope it helps reduce lagging
2018.12.30:
Sync latest source
Kernel baseline updated to LA.UM.7.5.r1-04000-8x96.0
WiFi display support
Bug fixes & improvements
2019.1.1:
Sync latest source
Various bugs in the last build have been addressed
Working unofficial SU addon: https://androidfilehost.com/?fid=11410963190603887268
Happy New Year & Enjoy!
2019.1.12:
Sync latest source
Add support for always-on-display
Minor bug fixes
2019.1.24:
Sync latest source
Fix touchscreen when gesture disabled
Fix whatsapp and CamScanner camera issue? Not sure, need feedback
Minor bug fixes
2019.2.10:
Sync latest source
Update kernel to LA.UM.7.5.r1-04100-8x96.0
Livedisplay & touchscreen gestures internal API migration
Allow disabling new USB gadgets when the device is locked
Minor bug fixes
2019.3.1:
Sync latest source
Fix weird color after boot? Need your confirmation
Performance optimizations
New offmode charging animation
Minor bug fixes
Note that some features/bugfixes will NOT be included in the upcoming official builds, be aware before switching from unofficial to official.
Future:
https://download.lineageos.org/oneplus3/changes/

Your opinion on migrating to official Pie firmware
dianlujitao said:
As you're aware, OnePlus started Pie closed beta days ago, and there're already leaked builds. I made a new Lineage build with blobs from one OOS9.0 leak, installed and updated firmware. On first boot after fw update, when boot animation was done, unexpectedly, I didn't see my launcher desktop as usual, but an "Decryption unsuccessful" warning telling me that my data was corrupted. Undoubtedly, after rebooting to TWRP it failed to mount /data thus I lost everything on my internal storage.
After several experiments I finally figured out the cause:
If your data is encrypted and bootloader is unlocked, after upgrading to Pie modem firmware, there's 100% chance of your data to become corrupted, and probably no way to restore them. The cause is on firmware side, probably something wrong with key migration, so there's no way for 3rd party developers to fix it. Note that which ROM was in use pre-upgrade doesn't matter at all, i.e., if bootloader was unlocked and you were upgrading from OOS 5.0.8(enforce encryption by default) to OOS 9.0, you'll lose all personal data after reboot from recovery installation. Interestingly, everything works as expected if bootloader was locked.
I couldn't comprehend why do they apply diverse low-level strategies to locked and unlocked bootloader. Arguably this is a bug and should be fixed when they started rolling OTA updates to the public, but it's also possible that this is by design and aims to restrict "unsafe" operations. Regardless, always be careful and backup your data before upgrading firmware in the near future.
Click to expand...
Click to collapse
Unfortunately they still didn't fix the issue in the OxygenOS 9.0 Community Beta released hours ago, in contract their PR claimed "SW team is aware of this issue" during the early closed beta stage. Given the fact the issue persists in both public H2OS and OOS build, I highly doubt if they're actively working on fixing the issue or they'd even gaf. Ofc it's still possible but very unlikely for them to fix it in future builds.
Now I'd like to know your opinion on migrating to Pie firmware. Device owners with encrypted data and unlocked bootloader MUST either backup data or relock bootloader before installing new firmware, others are not affected. Please vote.

Nice
Is it possible to update with a wipe system only ?

good

whats the difference in this build and does this uses 4.4 kernel ?

Playa82 said:
Finally
Is it possible to update with a wipe system only ?
Click to expand...
Click to collapse
Why this question is asked each time ?
You have TWRP right ? So backup your current install, flash without wiping, if it goes wrong, you know you have to clean flash, simple.
Plus, from the O.P of this thread:
O.P said:
Installation:
First time flashing LineageOS 16.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery (Latest official TWRP is highly recommended: https://twrp.me/oneplus/oneplusthree.html)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Optional: Install the Google Apps addon package
Reboot
Click to expand...
Click to collapse

lol, right when I clean flashed 15.1 and reinstalled everything from too many dirty flashes

karkiankit said:
does this uses 4.4 kernel ?
Click to expand...
Click to collapse
Why don't you check yourself? OP clearly states which kernel is in use:
https://github.com/dianlujitao/android_kernel_oneplus_msm8996/blob/lineage-16.0/Makefile#L1-L3

Nice!.. op3 community love u
Thank you

Weeew the legend is back. Awesome job

hi guys, what about these builds https://nyyu.tk/builds i also get ota update nightly

ele95 said:
hi guys, what about these builds https://nyyu.tk/builds i also get ota update nightly
Click to expand...
Click to collapse
Tried 9/11/18 build from jenkins. It wouldn't boot. You are welcome to try his latest one though and check if it boots.

Screenshots pls... Anyone??

Encryption still not working
Reboots to recovery right after "enter PIN" shows up

Racc145 said:
Encryption still not working
Reboots to recovery right after "enter PIN" shows up
Click to expand...
Click to collapse
IIRC, we need OnePlus sources from Android Pie for encryption to work correctly.

pjgowtham said:
Tried 9/11/18 build from jenkins. It wouldn't boot. You are welcome to try his latest one though and check if it boots.
Click to expand...
Click to collapse
dirty flash works and bootup fine for me but there is no sim signal so i revert to old one

Racc145 said:
Encryption still not working
Reboots to recovery right after "enter PIN" shows up
Click to expand...
Click to collapse
The same happened to me also. I'm encrypted on f2fs coming from OOS with a clean install.
@dianlujitao could you please add in the OP that it needs to be installed on an unencrypted phone - assuming that the reboot to recovery is caused by booting on an encrypted device.
Sent from my OnePlus3T using XDA Labs

Sometimes when I try to unlock using the fingerprint reader the screen stays black, while the buttons light up. The phone freezes and I need to reboot it. Someone else experienced the same issue?

Racc145 said:
Encryption still not working
Reboots to recovery right after "enter PIN" shows up
Click to expand...
Click to collapse
you knew that going in this, so why write and be supprised?

Development [ROM][OFFICIAL] LOS-Modded 19.0[DISCONTINUED]

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS Modded is a free, community built, aftermarket firmware distribution of Android 12 (S), which is designed to increase performance and reliability over stock Android for your device.
LineageOS Modded is based on the Android Open Source Project and LineageOS with extra contributions from many people within the Android community.
All the source code for LineageOS Modded is available in the LineageOS Modded Github repo.
Make sure to wipe userdata, ensure you have at least taken one stock OTA!
Flashing Instructions:-
TinyFastbootScript:-
Make sure to wipe userdata
1. Download TinyFastbootScript
2. Download the ROM named *Images*
3. Unpack TinyFastbootScript and the ROM into the same directory
4. Run the bat file for TinyFastbootScript
5. Choose latest fastboot version
6. Place device in bootloader mode
7. Run the command for flashing custom firmware
8. Done!
Fastboot Method:-
1. Download the Images zip
2.
Code:
fastboot update *Images*.zip
3. Reboot and enjoy!
Bugs :
Permissive
Safetynet
DualSIM
Some Settings Functions
* Drop a comment down below if you need any help, you can also Join https://t.me/electimonrel on telegram if you need any help.
Downloads:
Lineage-Modded:
https://build.lolinet.com/file/lineage/nio/
Contributors
@Electimon, @erfanoabdi, @dianlujitao
Source Code: moto-sm8250
Version Information
Status: Beta
Jan 06: initial release

Amazing work

awesome

Great work on the ROM electimon, smoothest available, and the battery management is excellent.

Hi,
I think scoped storage doesn't work properly on my Moto Edge S with Lineage 19. I'm trying to use some apps that require it, but they crash every time I try to add a directory, like aethersx2 for example.

Hi all
I successfully installed the Rom but only sim 1 work
How to activate two sims please .
Thanks all

Makhreta said:
Hi all
I successfully installed the Rom but only sim 1 work
How to activate two sims please .
Thanks all
Click to expand...
Click to collapse
check again the above bug list

bawitdol said:
check again the above bug list
Click to expand...
Click to collapse
Yes i know ,
so this mean no solution for this problem ?

Makhreta said:
Yes i know ,
so this mean no solution for this problem ?
Click to expand...
Click to collapse
Some people on Telegram have reported both sims working by flashing Evolution X, then flashing to los-modded 19 without wiping. Your results may vary though

Beetle84 said:
Some people on Telegram have reported both sims working by flashing Evolution X, then flashing to los-modded 19 without wiping. Your results may vary though
Click to expand...
Click to collapse
but i cannot find evolution x rom for this device ???!!!

Makhreta said:
but i cannot find evolution x rom for this device ???!!!
Click to expand...
Click to collapse
Motorola Moto G100 / Edge S
The Motorola Moto G100 / Edge S is a 6.7" phone with a 1080x2520p resolution display. The Qualcomm SM8250-AC Snapdragon 870 5G chipset is paired with 6/8GB of RAM. The main camera is 64+16+2MP and the selfie camera is 16+8MP. The battery has a 5000mAh capacity.
forum.xda-developers.com

is it android 12?

i tried version 18 and the two sims is o.k

HOW TO INSTAL MAGISK in this rom
1. download TWRP 3.5.2 and magisk 23.0
2. command <fastboot boot twrp.img> in bootloader mode
3. command <adb push magisk.zip /sdcard> in twrp
4. flash magisk.zip file
5. reboot to system
^^

Works great thanks!
having some issues with Android Auto showing black display since switching to this tho?
anyone know how to fix?

Is there a newer build?

xisa11 said:
Is there a newer build?
Click to expand...
Click to collapse
Under development

Just wondering what the differences would be between thins and the non-modded Lineage? I'm assuming more features, add-ons, but what are they?

Hello and thanks to everyone who is working on these different Roms for the g100!
One question, which is the most stable Rom for the g100 (without Google) to use as an daily driver?
Is this Rom 19.0 capable as an daily driver?
Thank you

How do I flash this on Linux ?. I suppose it is a bunch of fastboot commands but I am not sure.