I have rooted my OP6 using the following guide:
https://forum.xda-developers.com/showpost.php?p=76633618&postcount=70
I have Magisk manager installed (obviously as part of the rooting process).
I see a list of available Magisk modules in Magisk manager. Similar modules are also available for the Xposed framework.
My question is : What's the benefit of installing Xposed framework and then Xposed modules v. installing similar Magisk modules using Magisk manager? I am new to Magisk but have used Xposed modules in the past.
Thank You!
Magisk will keep SafetyNet passing, so if you using Android Pays and others apps that require SafetyNet to pass, Magisk is only option...
dustintinsley said:
Magisk will keep SafetyNet passing, so if you using Android Pays and others apps that require SafetyNet to pass, Magisk is only option...
Click to expand...
Click to collapse
Thank You!
DISCLAIMER: I'M NOT IN ANY WAY RESPONSIBLE FOR ANY DAMAGES THAT MAY RESULT DIRECTLY OR INDIRECTLY BY FOLLOWING THIS GUIDE.
Note : This tutorial assumes thay you're rooted with the latest magisk.
Well, after a ton of search and trying almost everything, I finally found a way to get edXposed working on the latest Android 10 MIUI. Just follow the steps below
1. Download the below files
a. edXposed for magisk (download the YAHFA version)
https://ci.appveyor.com/project/ElderDrivers/edxposed/builds/29965638/artifacts
b. Download the latest riru core (v 19.7)
https://github.com/RikkaApps/Riru/releases
c. edXposed installer. Download the "installer" version 2.2.4 and not the "manager".
https://github.com/ElderDrivers/EdXposed
2. Flash the riru core and then the edXposed ( YAHFA version) modules via magisk.
3. Reboot.
4. Install the edXposed installer
That's it.
If for some reason you can't boot your phone use the "magisk manager from recovery" to remove edXposed and riru core modules from recovery. Search for it on XDA.
Tested and found working on my Poco F1 running MIUI 11.0.4 EU Android Q/ Android 10, rooted with magisk 20.3 , running stock kernel and latest official TWRP recovery.
Tested modules :
CustoMIUIzer
Greenify
XprivacyLua
(All credits go to the guys at magisk)
Update:
Safety Net CTS profile fix :
Download this edXposed module
https://repo.xposed.info/module/com.cofface.ivader
Activate it in the edXposed manager and reboot.
That's it.
Update 2:
1. Apparantly this module only fakes the status of the CTS profile but most banking apps still work.
2. Chrome seems to crash while this module is activated.
Update 3:
Safety net with CTS profile passes without the module now.
Thank you works great miui eu 11.0.4
CustoMIUIzer module
tetrakinitis said:
Thank you works great miui eu 11.0.4
CustoMIUIzer module
Click to expand...
Click to collapse
Thanks for the feedback.
Preferred the 0.4.6.1 (4497)-selhygwy (sandhook).
So far, greenify works on this version. How's yours?
I can't seem to find the edXposed "installer" version 2.2.4
thomas140 said:
Preferred the 0.4.6.1 (4497)-selhygwy (sandhook).
So far, greenify works on this version. How's yours?
Click to expand...
Click to collapse
Greenify worked for me. And xprivacy too
MasterFURQAN said:
Greenify worked for me. And xprivacy too
Click to expand...
Click to collapse
Wow. But what's xprivacy ?
thomas140 said:
Wow. But what's xprivacy ?
Click to expand...
Click to collapse
It's an xposed module that sends fake/ no personal data to any app that you want like device identifiers, IMEI etc.
Search on XDA.
Bro can u tel how to run MPL app on rooted poco f1 MIUI 11.0.4 Android Q?
Do UPI apps work with it in India? can anyone confirm?
himanshu_atrix2 said:
Do UPI apps work with it in India? can anyone confirm?
Click to expand...
Click to collapse
Safety net still passes if that's your concern
hyper21 said:
I can't seem to find the edXposed "installer" version 2.2.4
Click to expand...
Click to collapse
Me too. But managed to find after googling browser.
https://github.com/solohsu/XposedInstaller/releases/tag/Ed_v2.2.4
Thanks for all the info but i can't seem to make it work... i tried multiple versions of Magisk, Riru, Edxposed and Edxposed installer but it always tells me the Xposed framework is not installed. Everything in magisk looks good and both modules are activated.
I don't really get it (i'm on a mi 9T)
If you have any idea i'd appreciate it (already spent hours on this forum and google to try to resolve this issue)
Baleeverne said:
Thanks for all the info but i can't seem to make it work... i tried multiple versions of Magisk, Riru, Edxposed and Edxposed installer but it always tells me the Xposed framework is not installed. Everything in magisk looks good and both modules are activated.
I don't really get it (i'm on a mi 9T)
If you have any idea i'd appreciate it (already spent hours on this forum and google to try to resolve this issue)
Click to expand...
Click to collapse
There is new update on magisk, try it.
And don't use edxposed installer.
Step:
1. Install riru core from magisk, reboot
2. Install edxposed from magisk, reboot
3. Install edxposed manager, see edxposed active or not.
Done to no avail... tried with Sandhook and Yahfa with magisk 20.3 / 20.1 and Riru 19.7/19.5/19.3 and 6 different Edxposed + Edxposed manager and installer
Baleeverne said:
Done to no avail... tried with Sandhook and Yahfa with magisk 20.3 / 20.1 and Riru 19.7/19.5/19.3 and 6 different Edxposed + Edxposed manager and installer
Click to expand...
Click to collapse
Try 0.4.6.2 https://ci.appveyor.com/project/ElderDrivers/edxposed/builds/31184590/artifacts
OP updated for the "safety net - CTS profile fix. "
Thanks but i can't seem to make it work. Safetypatch doesn't work, Props doesn't work either. I'm just going to give up... i spent too many hours just to get Customiuizer and trusted devices to work.
Baleeverne said:
Thanks but i can't seem to make it work. Safetypatch doesn't work, Props doesn't work either. I'm just going to give up... i spent too many hours just to get Customiuizer and trusted devices to work.
Click to expand...
Click to collapse
Yup props don't work. But this edXposed module worked like a charm. Just installed and enabled it and everything was fine.
I'm on MIUI 11.0.6 EU, magisk 20.3, riru core 19.7, edXposed 0.4.6.1 (4491) YAHFA
MasterFURQAN said:
Yup props don't work. But this edXposed module worked like a charm. Just installed and enabled it and everything was fine.
I'm on MIUI 11.0.6 EU, magisk 20.3, riru core 19.7, edXposed 0.4.6.1 (4491) YAHFA
Click to expand...
Click to collapse
I have the exact same config =D (except for sandhook 0.4.6.1 4510 but i tried yahfa 4491 two days ago lol)
Hi,
i 'm developping a app and i need use a magisk module inside, but i don't know how do it.
Is there someone who can help me?
The phone is rooted by magisk 21.2
Thanks
Hi all,
Am on Android 10 and phone has the latest TWRP, Magisk and busy box. In Magisk the Ramdisk is a YES. Titanium can disable internal apps no problem and seemingly uninstall them but after restarting the phone those apps re-appear. Also, though the latest MixPlorer and Root Explorer can edit/change Mixer_Paths, the original values come back after restarting the phone.
Can anyone advise how to solve this mystery.
Thanks in advance.
A10 and later , doesn't allow changing system files you need to do this via a magisk module systemless.
@soka said:
A10 and later , doesn't allow changing system files you need to do this via a magisk module systemless.
Click to expand...
Click to collapse
Thanks for that. I googled 'magisk module systemless' but it came up with loads of different things. Not sure what I should look for.
Use the magisk module Debloater from magisk repo, you also need BusyBox module and Termux app from playstore.
RokCruz said:
Use the magisk module Debloater from magisk repo, you also need BusyBox module and Termux app from playstore.
Click to expand...
Click to collapse
Much appreciated. Cheers
I have
- Rooted phone with Magisk 21
- Riru EdExposed v0.4.6
- Riru Core 21.3
- CustoMIUIzer v3.1.5
- Miui 12 on a Redmi Note 7 with android 10
When I open CustoMIUIzer a prompt says that the module is not activated inside EdExposed, but it is.
Other modules like Greenify works with my current setup. I'm using this old version of riru core and edexposed because this combination is the only one that works for me. I don't know if I need to update it for CustoMIUIzer to work, and if I do, do you know a combination that works?
Thank you very much in advance.
Why don't you give LSPosed a try?
Hi @dedq
I've heard about LSposed but I don't know what's the difference between EdExposed, and how to install it. Does it do the same?
jemmanuelmg77 said:
Hi @dedq
I've heard about LSposed but I don't know what's the difference between EdExposed, and how to install it. Does it do the same?
Click to expand...
Click to collapse
LSPosed is even better due to performance. I think you will like it and I use it too!
I just don't know whether your module is supported by LSPosed but you can check that.
@dedq thank you, I installed LSposed and luckily CustoMIUIzer was available, now it's working perfectly!
For anyone wondering how to install LSposed, simply:
- unninstall EdExposed first if you have it
- Update Magisk to latest version (in this case mine was 23, LSPosed requires this)
- Install Riru Core from Magisk modules
- Install LSPosed module from Magisk too
- From LSposed search for CustoMIUIZer and install it