Database Info

[TWRP] TWRP Recovery v2.3.2.3 For Micromax A89

So, for installing TWRP you need to follow these steps:
IMP:
[*] You need not to have rooted phone.
[*] This is for MMX A89 ONLY! Don't use for other phones as you can brick it!
[*] Although, this rom has been tested, I'm not responsible for any damage!
Prerequisites :
1. MTK6577 Drivers (Thanks to Bhardik)
2. SP Flash Tool (Thanks to Bhardik)
3. TWRP Itself! (Thanks to yuweng
Now we are ready to Flash!
[IMPORTANT : DISCONNECT YOUR PHONE BEFORE STARTING THIS TUTORIAL]
1. First of all, Download all of the packages listed above.
2. Install Drivers and Extract SP Flash Tools & TWRP image.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted "TWRP for MMX A89-dan.man" folder and select "MT6577_Android_scatter_emmc.txt" file.
Refer this screenshot for more help:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. [Skip this step if recover.img is already selected] Now to select recovery file, click on recovery and select recovery.img file.
7. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable. Keep those buttons holding while the process is completing.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed TWRP Recovery v2.3.2.3 ! Enjoy!
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
Click to expand...
Click to collapse
-------------
Booting into TWRP Recovery v2.3.2.3 is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into TWRP Recovery v2.3.2.3!
Here's a screenshot of TWRP working on my A89 :
-------------
CREDITS GOES TO YUWENG & BHARDIK :highfive:
All Credit goes to yuweng for creating the ROM and BHARDIK who has made CWM for A89 and helped compiling this tutorial.
And GREAT thanks to the Russian Master Shifu Javum, as he is the one that compile TWRP for our MT6577... :good:
Click to expand...
Click to collapse

dan.man said:
So, for installing TWRP you need to follow these steps:
IMP:
[*] You need not to have rooted phone.
[*] This is for MMX A89 ONLY! Don't use for other phones as you can brick it!
[*] Although, this rom has been tested, I'm not responsible for any damage!
Prerequisites :
1. MTK6577 Drivers (Thanks to Bhardik)
2. SP Flash Tool (Thanks to Bhardik)
3. TWRP Itself! (Thanks to yuweng
Now we are ready to Flash!
[IMPORTANT : DISCONNECT YOUR PHONE BEFORE STARTING THIS TUTORIAL]
1. First of all, Download all of the packages listed above.
2. Install Drivers and Extract SP Flash Tools & TWRP image.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted "TWRP for MMX A89-dan.man" folder and select "MT6577_Android_scatter_emmc.txt" file.
Refer this screenshot for more help:
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. [Skip this step if recover.img is already selected] Now to select recovery file, click on recovery and select recovery.img file.
7. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable. Keep those buttons holding while the process is completing.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed TWRP Recovery v2.3.2.3 ! Enjoy!
-------------
Booting into TWRP Recovery v2.3.2.3 is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into TWRP Recovery v2.3.2.3!
Here's a screenshot of TWRP working on my A89 :
-------------
Click to expand...
Click to collapse
I use this its awesome

Sir I have rooted my phone micromax q336 with kingroot but unable to flash twrp or any other custom recovery I am not having a pc ko please somebody

[recovery][cwm 6.0.5.0] mi4

This is CWM Recovery for MI4
Installation Guide - Dualboot
1. Download it and rename it as update.zip
2. Copy it to root folder of your Phone
3. Open the updater app
4. Press menu button and then "Choose file"
5. Then select install update.zip
6. Reboot
7. DONE
Installation Guide - No Dualboot
1. Download it and rename it as update.zip
2. Copy it to root folder of your Phone
3. Open the updater app
4. Wipe Data/Factory Reset (SD Card will not be formated!)
5. Press menu button and then "Choose file"
6. Then select install update.zip
7. Important: Yes Disable recovery flash on System 1/2 --> Yes if using MiUi Stock Roms
8. Reboot
9. DONE
Thanks and Source:
Mirco from Android-Hilfe.de
shahzad - en.miui.com
--> Use at your own risk
--> I dont have a Mi4 to test this

Dualboot activation
1. Use Updater App to boot into recovery
2. Menu Advanced auswählen
3. ENABLE TrueDualBoot
4. Move Data, Yes
5. Important: Menu Advanced --> Chose active system 1/2 (the one that will be booted)
Flash with Dualboot
1. Download Rom and move to SD Card
2. Use Updater App to boot into recove
3. Wipe Data/Factory Reset (SD Card will not be formated!)
4. Choose system 1 or 2
5. Install Zip
6. Choose the system selected in step 4
8. Important: Yes Disable recovery flash on System 1/2 if using MiUi Stock Roms
9. go back
10. Done

reserved

Do you know if the TBD work with this version?!

Tbd?

thebrainkafka said:
Tbd?
Click to expand...
Click to collapse
Sorry, TDB True Dual Boot

Up to miui5. Not for miui6.
Should work. Give it a try an report.

If we want to go back to stock recovery how do we do that?

Have to check

Gwanatu said:
If we want to go back to stock recovery how do we do that?
Click to expand...
Click to collapse
I think that you need to flash miui rom, and after install the recovery ask to you if you want to flash the Mirecovery
@thebrainkafka I try to enable the TDB, but the recovery don't ask to me if i want to split the data!! In this way I have one data for two ROM and the system app like clock, browser give me an FC on the first ROM

Download a new version supporting Dual Boot
Download

NEW VERSION Cwm r10 / 6.5.0.1
. original Site HERE
. direct download link HERE

NEW VERSION CWM R11
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Source: en.miui.com
.....................................................................
Download
. Link Press here
. Mirror Mega Press here
MD5:
22caf9a359f1c92aa4cc46f23e51bbab

Thanks

Not working on my mi 4
It fails to install on my mi4. i have renamed it update.zip on the root of the mi 4. if i select it via the updater app it says update failed error and the same on the stock recovery.

If you're having issues with the new R11 then I suggest you flash R8. It's been working fine for me.

gmengass said:
It fails to install on my mi4. i have renamed it update.zip on the root of the mi 4. if i select it via the updater app it says update failed error and the same on the stock recovery.
Click to expand...
Click to collapse
You can use an app as flashify or rashr,
Before you have to extract the recovery.img from the zip file and put it in your sdcard.
regards.

the USB mount don't work, anyone can fix it?

Skar3 said:
the USB mount don't work, anyone can fix it?
Click to expand...
Click to collapse
Neither here. Is there a fix?
Thanks
Sent from my MI 4W using XDA Free mobile app

gmengass said:
It fails to install on my mi4. i have renamed it update.zip on the root of the mi 4. if i select it via the updater app it says update failed error and the same on the stock recovery.
Click to expand...
Click to collapse
I was also unable to install it earlier but now I found a tutorial on that.
Easily Flash Custom Recovery in Xiaomi Mi4
After doing the steps mentioned in that post I was able to flash custom Roms and was also able to make backups using CWM.

[ Android Pie ] [Oxygen OS ] Open Beta 1 [Links] [ Tutorial - Root + No Data Loss ]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey everyone,
We are very excited to announce that we are ready to roll out the first Open Beta build based on Android™ 9.0 Pie™ for the OnePlus 6.
Changelog
Update system to Android™ 9.0 Pie™
Brand new UI for Android P
New Android P gesture navigation
Other new features and system improvements
Integrated OnePlus customization features
Supported accent color customization
New Do Not Disturb mode with adjustable settings
New Gaming Mode 3.0
Added text notification mode
Added notification for 3rd party calls
Known Issues
Some applications may not function as expected when running on this beta version
Google Pay service is not working
Google Play Store might show "Device is not Certified by Google"

Download Section :
ROM : OOS OB1
Google Drive || OFFICIAL Link || Uptobox Link
Recovery:
Official TWRP || Blu_Spark TWRP || Unofficial TWRP by joemossjr
For Root :
Magisk
​

FLASHING INSTRUCTION :
Warning : Always Backup Your Internal Storage For safer side
Points to be Noted :
1 : Dirty Flashing sometime works. But might have hidden bugs.
2 : Remove the pattern and also fingerprints before flashing the rom.
3 : Always you have to flash twrp zip file after flashing rom. Else you will loose twrp.
Method 1 : - Using TWRP recovery [ For Decrypted Users]
If you are on some other twrp versions, Kindly download Compatible TWRP recovery IMG file from download Section and Flash it in recovery. Blu_spark recovery works Fine. I recommend all to use his recovery.
Step 1: Place the Full ROM zip file in internal Storage.
Step 2: Now Reboot the phone to TWRP Recovery.
Step 3: Wipe Dalvik cache ,Data , System and Cache.
Step 4: Now select Full ROM zip file and swipe to flash.
Step 5: Flash the twrp zip file again and reboot to recovery.
Step 6: Now in recovery flash magisk 16.4
Step 7: Now Flash the No-verity file from here [Important]
Step 8: Reboot the phone.
Method 2 : - Using TWRP recovery [ For Encrypted Users]
If you are on some other twrp versions, Kindly download Compatible TWRP recovery IMG file from download Section and Flash it in recovery. Blu_spark recovery works Fine. I recommend all to use his recovery.
Step 1: Place the Full ROM zip file in internal Storage.
Step 2: Now Reboot the phone to TWRP Recovery.
Step 3: Wipe Dalvik cache ,Data , System and Cache.
Step 4: Now select Full ROM zip file and swipe to flash.
Step 5: Flash the twrp zip file again and reboot to recovery.
Step 6: Now in recovery flash magisk 16.4
Step 7: Reboot the phone.
Method 3 : - Upgrading from Stable official version to Android P Beta version
Step 1: Download the ROM.
Step 2: Copy ROM upgrade package to the mobile phone storage.
Step 3: Settings -> system updates -> top right corner icon -> local upgrade -> click on the installation package -> immediately upgrade -> system upgrade to 100%.
Step 4: Select Reboot system now.
Step 5: Update successfully.​
Method 4 : - Upgrading from Developer Preview version to Android P Beta version
Step 1: Download the latest ROM.
Step 2: Copy ROM upgrade package to the mobile phone storage.
Step 3: Settings -> system updates -> top right corner icon -> local upgrade -> click on the installation package -> immediately upgrade -> system upgrade to 100%.
Step 4: Press the power button and choose to shut down.
Step 5: Select Reboot system now.
Step 6: Press the power button + volume down to enter recovery mode.
Step 7: Select Wipe data/factory reset, click power, select yes, confirm.
Step 8: Select Reboot system now.
Step 9: Update successfully.
Please note: This upgrade will clear all contents of the phone, please make sure to back up.​
Note:
1. Please keep in mind that this is a beta software. These builds are not as stable as our official OTAs. By installing this update, you accept the potential risks. And please remember to tell us about any bugs you may find using the bug report forums, found here: https://forums.oneplus.com/feedback/ (please assign the category as OnePlus 6 with Android P)
2. Make sure to let us know how you feel about the beta builds here in the thread too, we look forward to reading your feedback.

Steps To Decrypt Device :
Boot into twrp recovery.
Flash Rom.
Flash twrp zip file.
Format Data.
Boot into recovery again.
Flash Magisk version.
Flash No Verity File from here
Now reboot to system and enjoy.

Updating Tutorial. Wait. reserved 3

Awesome news i hope these builds are better compared to the developer previews.

Duplicate thread closed. Please continue here:
[Official Android Pie Beta] Oxygen OS Open Beta 1 for the OnePlus 6
HatRiGt said:
Hey everyone,
We are very excited to announce that we are ready to roll out the first Open Beta build based on Android™ 9.0 Pie™ for the OnePlus 6.
Changelog
Update system to Android™ 9.0 Pie™
Brand new UI for Android P
New Android P gesture navigation
Other new features and system improvements
Integrated OnePlus customization features
Supported accent color customization
New Do Not Disturb mode with adjustable settings
New Gaming Mode 3.0
Added text notification mode
Added notification for 3rd party calls
Known Issues
Some applications may not function as expected when running on this beta version
Google Pay service is not working
Google Play Store might show "Device is not Certified by Google"
Click to expand...
Click to collapse

How to Downgrade Mi A1 from Android Pie To Oreo | NO EDL – NO NETWORK PROBLEM | 2020

This is my steps to downgrade from android pie to android Oreo to flash MIUI 11 on my Mi A1
I tried all the videos on YouTube and download tens of flash files and Roms but always I have the network problem (WIFI work fine but not the phone network) the only way to let’s work again by flashing Pie again but I continue trying until find this way so I share it with anyone have the same problem
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
please follow all the steps below to avoid any problems I make it simple to be easy to understanding
What we need:
- tissot_images_V9.6.8.0.ODHMIFE_20181031.0000.00_8.0 HERE
- MIUI 11 Rom for A1 HERE or any Oreo rom
- MiFlash tools HERE
- ADB HERE
- Backup-O HERE
- TWRP boot-recovery.img HERE
- Modem file HERE
Let’s begin:
1- Backup your EFS files
a- In android pie flash boot-recovery.img
b- Boot to Fastboot (Shutdown the phone → Vol Up + Power Button)
c- Boot to boot-recovery (start cmd in adb folder → Fastboot boot boot-recovery.img)
d- Go to Backup → select EFS → Swipe to Backup
e- In PC open your phone from my computer → Copy TWRP folder and past it in safe place (Very important)
2- Copy the contents of Backup-O folder (Not the folder itself) to the TWRP/BACKUPS/xxxxxxxxxx/20xx-xx-xx—xx-xx-xx (The name may be different depending on the phone serial) folder in your phone and Restore it
a- To make sure everything is good before you do that delete all the folders inside TWRP in your phone and make a new backup to anything you want (select the smaller size)
b- Now open the created backup folder and delete all the file then copy the contents of Backup-O here
c- Go back to TWRP main menu → Restore → (select all the partition included) Swipe to Restore
3- Now reboot to Fastboot
4- Open MiFlash → select tissot_images_V9.6.8.0.ODHMIFE_20181031.0000.00_8.0 folder (Extract Zip file you downloaded) → Flash
5- Let the phone boot (you'll have No Service now and that's normal don’t worry)
6- Shutdown the phone → boot to recovery (start cmd in adb folder → Fastboot boot boot-recovery.img)
7- From PC open your phone and delete any TWRP folder there → copy TWRP folder that we did it in the beginning (EFS from Pie) to the phone
8- Go back to TWRP main menu → Restore → (select EFS) Swipe to Restore
9- Copy MIUI 11 rom or any Oreo rom you want to phone internal storage and flash it
10- Let the rom completely boot you'll notice No Service again (Don't worry)
11- Boot to Fastboot (Shutdown the phone → Vol Up + Power Button)
12- In PC copy modem.img to ADB folder → Flash it to the phone using:
- fastboot flash modem_a modem.img
- fastboot flash modem_b modem.img
- fastboot reboot
(The Modem from V10.0.14.0.PDHMIXM)
Congratulations! Now Everything working fine and the signal back again
Edit: Flash 10.0.3.0.voice.fix to fix any problem with voice on call Here

Edit: Flash 10.0.3.0.voice.fix to fix any problem with voice on call Here

[RECOVERY] TWRP 3.6.x.x for Samsung Galaxy J810G/GF/F/M/Y j8y18lte

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.6.x.x for Samsung Galaxy J8​Note: I AM NOT RESPONSIBLE OF ANY DAMAGE WILL HAPPEN AFTER YOU FLASH THIS TWRP ,
ALWAYS DO BACKUP FIRST
DOWNLOAD MODE
1. power off your Samsung J8/On8
2. press & hold both vol+ & vol- keys and insert USB driver
3. now you are in Download mode
INSTALLING RECOVERY
1. open Odin flash tool
2. make sure you are in download mode and USB is connected
4. now you will see Added logs in log Tab
3. click on AP Tab and select TWRP-3.6.x.x-(j8y18lte)-goldfish07.tar file
4. now click on start & wait for recovery to be flashed .
5. if recovery flashed correctly you see pass message
NOTE: When you see pass message suddenly press and hold vol- key and power
Congratulations you are in recovery now
UPDATING RECOVERY
1. reboot to already installed custom recovery
2. click on install and click button flash .img
3. now select TWRP-3.6.x.x-goldfish07.img file from sdcard
4. choose Recovery option and flash
5 reboot to recovery to check new recovery
6. Enjoy
[NOTE:]
can't mount data & internal storage is 0
1. click wipe in recovery
2 . click on format data type yes and hit return
3. check, you will able to mount data [internal storage]
DOWNLOADING FILES
Download TWRP 3.6.x.x.img (recovery flashable)
Download TWRP 3.6.x.x-AP-Odin.tar (Odin flashable)
DOWNLOAD
Thanks to :
@TeamWin For the latest TWRP IMG
Contributors:
goldfish07(Ayush Bisht)
Source: https://github.com/goldfish07

TWRP 3.6.1_9 build 21 June 2022

#reserved 1

thanks

Hi guys
I see the message on my screen
Only official released binaries are allowed to be flashed.
Click to expand...
Click to collapse
Samsung j810F
What I can do before install it?

Cheat said:
Hi guys
I see the message on my screen
Samsung j810F
What I can do before install it?
Click to expand...
Click to collapse
Oem unlocked in developer option ?

Oem unlocked in developer option ?
Click to expand...
Click to collapse
of course

look at my screens, maybe you can find errors ))

Cheat said:
look at my screens, maybe you can find errors ))
Click to expand...
Click to collapse
yeah, that prenormal thing

Cheat said:
look at my screens, maybe you can find errors ))
Click to expand...
Click to collapse
Or follow this: 1- Restore latest stock (latest update for your country CSC ( IN DOWNLAOD MODE AS "Carrier_ID=XXX")
2- finish setup without sim card or wifi
3- place sim and connect wifi
4- go to date and time, uncheck automatic date and time
5- go to about section, software information
6- Tap build number to enable dev settings
7- uncheck auto update system
8- back to date and time, set date before security patch (march 2021 for example)
9- go to software update, disable auto update on wifi, then spam press it
10- wait 5 min then restart
above instruction taken from telegram group

Or follow this: 1- Restore latest stock (latest update for your country CSC ( IN DOWNLAOD MODE AS "Carrier_ID=XXX")
2- finish setup without sim card or wifi
3- place sim and connect wifi
4- go to date and time, uncheck automatic date and time
5- go to about section, software information
6- Tap build number to enable dev settings
7- uncheck auto update system
8- back to date and time, set date before security patch (march 2021 for example)
9- go to software update, disable auto update on wifi, then spam press it
10- wait 5 min then restart
above instruction taken from telegram group
Click to expand...
Click to collapse
Nice. It's Work! Amazyng! Great thanks

for build 01 december 2021

Cheat said:
Nice. It's Work! Amazyng! Great thanks
Click to expand...
Click to collapse
not work for me