Related
Yo
Anyway, I have so far used hydro 4 and cm10- both ran nicely and initially connected to home wifi. However, I took it on holiday for 2 days (and meanwhile was connecting to other networks) and when I returned I could only detect wifi from other houses, not my own. This has happened twice, as soon as I go anywhere different, and then come back and try and connect, I cannot detect my homewifi.
A reflash will sort it, but the problem will come back if i use other wifis, then return home.
Is there a fix for this?
Thanks
Yo,
Sup?
http://forum.xda-developers.com/showthread.php?p=27095558
Pls read #1 red letters
Sent from my Nexus S 4G using Tapatalk 2
kk
minieod said:
Yo,
Sup?
Click to expand...
Click to collapse
Hey, I couldn't find anything specific to this issue, any suggestions?
k
DMardroid said:
http://forum.xda-developers.com/showthread.php?p=27095558
Pls read #1 red letters
Sent from my Nexus S 4G using Tapatalk 2
Click to expand...
Click to collapse
Im colour-blind
chaza01 said:
Yo
Anyway, I have so far used hydro 4 and cm10- both ran nicely and initially connected to home wifi. However, I took it on holiday for 2 days (and meanwhile was connecting to other networks) and when I returned I could only detect wifi from other houses, not my own. This has happened twice, as soon as I go anywhere different, and then come back and try and connect, I cannot detect my homewifi.
A reflash will sort it, but the problem will come back if i use other wifis, then return home.
Is there a fix for this?
Thanks
Click to expand...
Click to collapse
Did you go back to stock and test? I would assume it isn't a hardware issue since you can connect to others, so I would then troubleshoot your home wifi, and see why it isn't connecting to it. And the reason you are taking a beating over this, is it has nothing to do with development, so don't post ****ing stupid questions in this forum.
Turbojugend said:
Did you go back to stock and test? I would assume it isn't a hardware issue since you can connect to others, so I would then troubleshoot your home wifi, and see why it isn't connecting to it. And the reason you are taking a beating over this, is it has nothing to do with development, so don't post ****ing stupid questions in this forum.
Click to expand...
Click to collapse
LOL I like the fact that its also **URGENT**. hahaha.
That's why we have the General and Q&A section, for this type of questions. Please, lets keep the development section for the developers who contribute(I am so thankful).
Let's try to keep this clean and organized.
Just forget all networks then reboot and you should be able to connect again.......
Throw your router in your trashcan and buy another one..
or ask your ISP, I think this has nothing, seriously NOTHING to do with bad fw or anything else on the device itself.
(and to be honest, I don't like the "Yo" at the start of the thead, find it out by yourself you irrespectful ***hole..)
There are few rules I'm a fan of, but come on people, simple organization.
Sent from my VS910 4G using Tapatalk 2
Turbojugend said:
Did you go back to stock and test? I would assume it isn't a hardware issue since you can connect to others, so I would then troubleshoot your home wifi, and see why it isn't connecting to it. And the reason you are taking a beating over this, is it has nothing to do with development, so don't post ****ing stupid questions in this forum.
Click to expand...
Click to collapse
ah i see, fair enough- I just thought it may be to do with the ROMs
hehe
eejjay said:
Throw your router in your trashcan and buy another one..
or ask your ISP, I think this has nothing, seriously NOTHING to do with bad fw or anything else on the device itself.
(and to be honest, I don't like the "Yo" at the start of the thead, find it out by yourself you irrespectful ***hole..)
Click to expand...
Click to collapse
It's an asus n56u; I couldnt do that
Hello, I had the same problem, change all settings in the routter including a section where the channel country put it in USA, was ALL GOOD FOR LUCK
marcosbruno said:
Hello, I had the same problem, change all settings in the routter including a section where the channel country put it in USA, was ALL GOOD FOR LUCK
Click to expand...
Click to collapse
Hey, so its a router problem? Im in the UK, should I set it UK?
Thanks a lot
Hello
I have a big problem, unfortunately the display screen of my new nexus 5 was crashed over the proximity sensor, so my proximity sensor always on, when I am making calls my screen is off and i can't do any thing even hang up the call , so how can i disable my proximity sensor.
My phone isn't rooted
I don't think you can disable it, not without root anyways. Can you still turn the screen on with the power button?
Sent from my Nexus 5 using Tapatalk
bblzd said:
I don't think you can disable it, not without root anyways. Can you still turn the screen on with the power button?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
no i can't turn it on
Any help please
moodyy25 said:
Any help please
Click to expand...
Click to collapse
Read this thread: http://forum.xda-developers.com/nexus-4/help/solved-how-to-disable-nexus-4-proximity-t2558878
See if any of the suggestions here work for you.
Also try this: https://play.google.com/store/apps/details?id=com.itsme4ucz.screenoff
All of these things were found by searching Google for 2 minutes. Sometimes it can be a better option than here for unique things.
Good Luck.
El Daddy said:
Read this thread: http://forum.xda-developers.com/nexus-4/help/solved-how-to-disable-nexus-4-proximity-t2558878
See if any of the suggestions here work for you.
Also try this: https://play.google.com/store/apps/details?id=com.itsme4ucz.screenoff
All of these things were found by searching Google for 2 minutes. Sometimes it can be a better option than here for unique things.
Good Luck.
Click to expand...
Click to collapse
thank you for your reply
i did google search before posting here and i tried both before posting but it didn't work with me
thank you again , waiting other suggestions
it looks like no solution for this problem ?????????????????
please help
i can't use my phone ?????????????????
if people already given you options, and it doesn't work. what do you think you should do ????????????????????????????
Get it fixed by technician. Disabling it is only a temporary fix.
So I'm having this problem where my screen-backlight will stay on after it gets into sleep and locks itself. It stays on forever. This drains lots of battery, and I have no idea where it is coming from.
Possible causes:
- CM 12.1 Nightly bug
- Exposed Framework:
- Status bar download bar thingy
-Twilight App
I would really like to know what the error is.
Thanks for your help,
-Ramon
Sent from my A0001 using Tapatalk
JustRamon said:
So I'm having this problem where my screen-backlight will stay on after it gets into sleep and locks itself. It stays on forever. This drains lots of battery, and I have no idea where it is coming from.
Possible causes:
- CM 12.1 Nightly bug
- Exposed Framework:
- Status bar download bar thingy
-Twilight App
I would really like to know what the error is.
Thanks for your help,
-Ramon
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
I'm not sure why you opened two separate threads only five minutes apart, you really should have just consolidated your questions into one thread. Anyway, the answer I gave in your other thread applies here too.
Hi..
Just following this tread because i have the sam problem. I cant find the other tread where a solution is mentioned. Can somebody help me?
Birke
I'm having the same issue, I think other post was deleted.
Heisenberg said:
I'm not sure why you opened two separate threads only five minutes apart, you really should have just consolidated your questions into one thread. Anyway, the answer I gave in your other thread applies here too.
Click to expand...
Click to collapse
Hey,
I'm having the same issue that this person was having. I can't find his other post that you referenced when I went through his history. Can you please supply me with the answer you gave him? Thanks!
Biggles666 said:
Hey,
I'm having the same issue that this person was having. I can't find his other post that you referenced when I went through his history. Can you please supply me with the answer you gave him? Thanks!
Click to expand...
Click to collapse
http://forum.xda-developers.com/oneplus-one/help/multirom-boot-img-t3206926
Just got my Note 8 (QJA) and I noticed a few bugs and wondering if anyone else noticed. First one is the Auto Rotate quick toggle has no animation. For some reason that drives me crazy! The other bug I noticed is the WiFi Calling. Everythig about the WiFi Calling on my device is bugged out! Hopefully an update will correct. :fingers-crossed:
Beesvee said:
Just got my Note 8 (QJA) and I noticed a few bugs and wondering if anyone else noticed. First one is the Auto Rotate quick toggle has no animation. For some reason that drives me crazy! The other bug I noticed is the WiFi Calling. Everythig about the WiFi Calling on my device is bugged out! Hopefully an update will correct. :fingers-crossed:
Click to expand...
Click to collapse
Factory reset may work to clear bugs....on new device
BlueFox721 said:
Factory reset may work to clear bugs....on new device
Click to expand...
Click to collapse
So are you saying your device does not experience these bugs? Are you on Baseband/Buildl QJA?
Beesvee said:
So are you saying your device does not experience these bugs? Are you on Baseband/Buildl QJA?
Click to expand...
Click to collapse
What I am saying is that many had to perform factory reset on new note 8 regardless of builds...AQH7, AQI5, BQJA, and there will be those with the new BQK1 and 2 because of factory build issues....many times even updates cause issues that require a factory reset...it is not build dependent...every device is like this...
Hi all,
I've been searching for answers to this issue to no avail so far!
The Bluetooth works flawlessly when it works but after the unit has been off for a few hours and comes back out of sleep or even after a full shutdown, the Bluetooth stops working and looses both its name and passcode
Sometimes takes up to 3 full reboots to get it back
It's got an sd-968 in a px3 unit running Malaysk ROM also with the most recent MCU
It did the same on stock ROM too
Thanks!
ajp8868 said:
Hi all,
I've been searching for answers to this issue to no avail so far!
The Bluetooth works flawlessly when it works but after the unit has been off for a few hours and comes back out of sleep or even after a full shutdown, the Bluetooth stops working and looses both its name and passcode
Sometimes takes up to 3 full reboots to get it back
It's got an sd-968 in a px3 unit running Malaysk ROM also with the most recent MCU
It did the same on stock ROM too
Thanks!
Click to expand...
Click to collapse
Is the Bluetooth correctly setup in factory settings?
hans.vinkers said:
Is the Bluetooth correctly setup in factory settings?
Click to expand...
Click to collapse
From what I can tell yes, it's set as an sd-968 which works now and then. I've tried the others but they don't work at all
ajp8868 said:
From what I can tell yes, it's set as an sd-968 which works now and then. I've tried the others but they don't work at all
Click to expand...
Click to collapse
Maybe try a different phone just for testing
hans.vinkers said:
Maybe try a different phone just for testing
Click to expand...
Click to collapse
I'll give it a go, but it's the actual box that is loosing its name and passcode when you go into Bluetooth settings. I've tried restarting it this morning 3 times but can't get it to work
Anybody know how to replace a bluetooth module on these units? The place I bought it from wants to send me a replacement module but I assumed it would be a chip on the board?
ajp8868 said:
Anybody know how to replace a bluetooth module on these units? The place I bought it from wants to send me a replacement module but I assumed it would be a chip on the board?
Click to expand...
Click to collapse
My guess would actually be that they´d send you a usb bluetooth module, as they are dirt cheap in china
I cant promise this ofcourse. Try asking them
WarSpaz said:
My guess would actually be that they´d send you a usb bluetooth module, as they are dirt cheap in china
I cant promise this ofcourse. Try asking them
Click to expand...
Click to collapse
Ahh that would make sense! Strange I thought this would conflict with the on-board bluetooth
AFAIK there is no USB bluetooth module that works with our units...if technical support is going to send you a replacement it will be a full coreboard replacement.
Same problem...
ajp8868 said:
Hi all,
I've been searching for answers to this issue to no avail so far!
The Bluetooth works flawlessly when it works but after the unit has been off for a few hours and comes back out of sleep or even after a full shutdown, the Bluetooth stops working and looses both its name and passcode
Sometimes takes up to 3 full reboots to get it back
It's got an sd-968 in a px3 unit running Malaysk ROM also with the most recent MCU
It did the same on stock ROM too
Thanks!
Click to expand...
Click to collapse
The same situation with my PX5 Dasaita - very rare, but some times bluetooth looses name and password. Can t find what is the cause...
Regards
I have a KBT unit and the same has been happening to me too. Initially the name was "EONON" (the reseller) and passcode something starting with 5. For no apparent reason the name would change to "CAR-KIT" and passcose 1234. The same happened after I upgraded the SoC from a PX3 to a PX5, updating the MCU and firmware (multiple times for reasons unleated to this). After the upgrade it would go back to "EONON" and at some point it would change to "CAR-KIT" again.
ikerg said:
AFAIK there is no USB bluetooth module that works with our units...if technical support is going to send you a replacement it will be a full coreboard replacement.
Click to expand...
Click to collapse
I was reading in some topic about a guy that bought a combined wifi/bt stick that worked both for wifi and bt as long as he selected the right bt module in settings
Skickat från min ONEPLUS A3003 via Tapatalk
abagos said:
I have a KBT unit and the same has been happening to me too. Initially the name was "EONON" (the reseller) and passcode something starting with 5. For no apparent reason the name would change to "CAR-KIT" and passcose 1234. The same happened after I upgraded the SoC from a PX3 to a PX5, updating the MCU and firmware (multiple times for reasons unleated to this). After the upgrade it would go back to "EONON" and at some point it would change to "CAR-KIT" again.
Click to expand...
Click to collapse
Pretty much the exact situation but with a slightly different name! Upgraded MCU which didn't help at all. They sent me a new stock ROM to flash which also didn't help so thought I'd try Malaysk's, again no help. I'm wondering if it is a hardware issue or software..
WarSpaz said:
I was reading in some topic about a guy that bought a combined wifi/bt stick that worked both for wifi and bt as long as he selected the right bt module in settings
Skickat från min ONEPLUS A3003 via Tapatalk
Click to expand...
Click to collapse
Now that sounds good, any chance you remember where?
ajp8868 said:
Pretty much the exact situation but with a slightly different name! Upgraded MCU which didn't help at all. They sent me a new stock ROM to flash which also didn't help so thought I'd try Malaysk's, again no help. I'm wondering if it is a hardware issue or software..
Now that sounds good, any chance you remember where?
Click to expand...
Click to collapse
Well, its somewhere here in mtcd diskussion, and i believe in a bluetooth relatwd thread
Skickat från min ONEPLUS A3003 via Tapatalk
WarSpaz said:
Well, its somewhere here in mtcd diskussion, and i believe in a bluetooth relatwd thread
Skickat från min ONEPLUS A3003 via Tapatalk
Click to expand...
Click to collapse
Hi.
the discussion you search is this:
https://forum.xda-developers.com/android-auto/mtcd-discussion-questions-development/bluetooth-loosing-passcode-t3735971/page2#post75257399
The the device COMFAST Bluetooth4.0 + wifi 150 Mbps Wi-Fi Dongle RTL8723BU to the USB input seem to be ok if in the factory setting set the bt as MD725.
I wait one item of this dongle from aliexpress, i hope this will resolve my problem with Bt.
andysabre said:
Hi.
the discussion you search is this:
https://forum.xda-developers.com/android-auto/mtcd-discussion-questions-development/bluetooth-loosing-passcode-t3735971/page2#post75257399
The the device COMFAST Bluetooth4.0 + wifi 150 Mbps Wi-Fi Dongle RTL8723BU to the USB input seem to be ok if in the factory setting set the bt as MD725.
I wait one item of this dongle from aliexpress, i hope this will resolve my problem with Bt.
Click to expand...
Click to collapse
Hi Andy,
Afraid that link takes me to this page, thank you for the information though, I've ordered one as it's only £5 so worth a try! Let me know how you get on if you get yours first
ajp8868 said:
Hi Andy,
Afraid that link takes me to this page, thank you for the information though, I've ordered one as it's only £5 so worth a try! Let me know how you get on if you get yours first
Click to expand...
Click to collapse
sorry.
here the correct link:
https://forum.xda-developers.com/an...mtce-px5-unit-bluetooth-issues-t3732698/page2
for the dongle i hope will arrive soon.
bye
andysabre said:
sorry.
here the correct link:
https://forum.xda-developers.com/an...mtce-px5-unit-bluetooth-issues-t3732698/page2
for the dongle i hope will arrive soon.
bye
Click to expand...
Click to collapse
Perfect thanks, good luck with yours!
Deleted
Hello, i have the same problem with the same bt chip.
SD-968 on Eonon navigation. Last summer it was working ok if i remember correctly when i was on stock rom, but then i changed to malasyk and hal9k, and i have problems.
I checked the factory settings and i have SD-968 option on BT. I even dissasembled the navigation to physically check if i have SD-968 and its there!
If i put the navi to autosleep, almost never wakes up with BT available. Always no name and no password with no luck of writing them back. The only solution is to reset the navi once, maybe twice.
I tried to put it on auto off after 30mins, so it will do a full bootup, and maybe 5 times out of 10, it works.
Maybe is has something to do with the cold? i tried the navi on my table in the house and it was a perfect 10/10 at bootup.