Related
Hey guys,
since i got my Oneplus 6, i couldnt get viper to work quite right. Most of the time its just shows "Processing: No" till i restart it and after like a hour or device switch it turns off.
I tried:
Copying the Audioeffects.conf from system/etc to vendor/etc
Using Magisk Audio Compability Module
Using Alternate Magisk V4A Module
Using a Magisk Rom with Build-In V4a (currently xXx 2.8)
Disabling Dirac and Services
but nothing worked
thanks for your help
i had the same but then i tried to use the other viper release from magisk and it worked. there is this one called hifi and fx
Try exiting the viper app with the 3 dots top right hand corner. That is what worked for me
dgunn said:
Try exiting the viper app with the 3 dots top right hand corner. That is what worked for me
Click to expand...
Click to collapse
that works for like 10 mins and then it gets killed
byReqz said:
that works for like 10 mins and then it gets killed
Click to expand...
Click to collapse
Sounds to me like you need to disable the battery optimizations for Viper. It's almost as if your phone is detecting High battery drain and shuts down the app
dgunn said:
Sounds to me like you need to disable the battery optimizations for Viper. It's almost as if your phone is detecting High battery drain and shuts down the app
Click to expand...
Click to collapse
yeah thats what i thought too, i zried whitelisting it and installing it as system app (+ magisk module) but it didnt seem to work.
I removed the one from my rom and tried the magisk repo version again and somehow its working till now
byReqz said:
yeah thats what i thought too, i zried whitelisting it and installing it as system app (+ magisk module) but it didnt seem to work.
I removed the one from my rom and tried the magisk repo version again and somehow its working till now
Click to expand...
Click to collapse
I was unaware that you were using the magisk module. I could not get that one to work either
dgunn said:
I was unaware that you were using the magisk module. I could not get that one to work either
Click to expand...
Click to collapse
the normal one doesnt work with viper doewsnt it?
Try just exiting the viper app then reopening it. I had this problem before and it just randomly went away.
TheNetwork said:
Try just exiting the viper app then reopening it. I had this problem before and it just randomly went away.
Click to expand...
Click to collapse
it only works for a few mins that way
I'm using the Android p beta and i don't have the problems with viper as i did with oxygen os 5. it's always processing for my headphones, either plugged in or Bluetooth. the only exception is sometimes after receiving a call while listening to music, after the call is over and my music resumes, viper is no longer processing. not every time though. i used the latest magisk and the viper module in the screenshot.
i also didn't make any changes to conf files, just installed through magisk download. rebooted, opened viper fx, gave it storage permissions and turned it on.
Had the same problem, but was able to resolve it by choosing the legacy (non-material) interface when installing the Magisk module. I still flashed the full module and selected the latest version, just not the material interface. It may have been something else, but I've updated my ROM (HavocOS) several times and even done a couple full fastboot stock resets and the issue is yet to resurface.
TuxRuffian said:
Had the same problem, but was able to resolve it by choosing the legacy (non-material) interface when installing the Magisk module. I still flashed the full module and selected the latest version, just not the material interface. It may have been something else, but I've updated my ROM (HavocOS) several times and even done a couple full fastboot stock resets and the issue is yet to resurface.
Click to expand...
Click to collapse
as i said, idk why but its working now.and im on material now
byReqz said:
Hey guys,
since i got my Oneplus 6, i couldnt get viper to work quite right. Most of the time its just shows "Processing: No" till i restart it and after like a hour or device switch it turns off.
I tried:
Copying the Audioeffects.conf from system/etc to vendor/etc
Using Magisk Audio Compability Module
Using Alternate Magisk V4A Module
Using a Magisk Rom with Build-In V4a (currently xXx 2.8)
Disabling Dirac and Services
but nothing worked
thanks for your help
Click to expand...
Click to collapse
I've had this problem on an Samsung S7 Edge, S8 Plus, and now, a Oneplus 6.
Everything appears to look good on Driver Status, except "Processing:No" and it's audibly not on.
What's worked for me in this specific situation is replacing the configuration file "audio_effects.conf" in /system/vendor/etc with another configuration file that I found in another XDA thread. So here's the concrete steps:
1. Install the viper4android FX module from Magisk manager that has four devs (v1.7 as i write this) and reboot. I don't know if this method will work with other v4a modules. Note that Processing will work temporarily, but likely won't survive a reboot.
2. Download this file (files_for_v4a.zip) from here:
https://forum.xda-developers.com/ga...laxy-s8-s8-t3596933/post72049061#post72049061
3. Unzip files_for_v4a.zip and make note where it extracted. (You'll need one of its contents, audio_effects.conf, later)
4. Using a file explorer with root capability, go to the following directory:
/system/vendor/etc
5. Copy the existing "audio_effects.conf" to another directory, for example /download, to use as a backup in case this goes badly
6. Copy the file "audio_effects.conf" that you unzipped earlier to /system/vendor/etc, overwriting the existing file.
7. Reboot and test v4a.
Good luck!
Note: The Pulse feature of a custom NavBar in custom ROMS based on LOS 15.1 will not work if you do the above.
Although I'm just a hack, I modded an "audio_effects.conf" file using commits from the above to work with Pulse. I've tested it on my device (despite my lack of know-how, it seems to work for me and others!), so be aware of this if you download the following file and use it (by renaming it audio_effects.conf and placing it in /system/vendor/etc):
reaper000 said:
I've had this problem on an Samsung S7 Edge, S8 Plus, and now, a Oneplus 6.
Everything appears to look good on Driver Status, except "Processing:No" and it's audibly not on.
What's worked for me in this specific situation is replacing the configuration file "audio_effects.conf" in /system/vendor/etc with another configuration file that I found in another XDA thread. So here's the concrete steps:
1. Install the viper4android FX module from Magisk manager that has four devs (v1.7 as i write this) and reboot. I don't know if this method will work with other v4a modules. Note that Processing will work temporarily, but likely won't survive a reboot.
2. Download this file (files_for_v4a.zip) from here:
https://forum.xda-developers.com/ga...laxy-s8-s8-t3596933/post72049061#post72049061
3. Unzip files_for_v4a.zip and make note where it extracted. (You'll need one of its contents, audio_effects.conf, later)
4. Using a file explorer with root capability, go to the following directory:
/system/vendor/etc
5. Copy the existing "audio_effects.conf" to another directory, for example /download, to use as a backup in case this goes badly
6. Copy the file "audio_effects.conf" that you unzipped earlier to /system/vendor/etc, overwriting the existing file.
7. Reboot and test v4a.
Good luck!
Note: The Pulse feature of a custom NavBar in custom ROMS based on LOS 15.1 will not work if you do the above.
Although I'm just a hack, I modded an "audio_effects.conf" file using commits from the above to work with Pulse. I've tested it on my device (despite my lack of know-how, it seems to work for me and others!), so be aware of this if you download the following file and use it (by renaming it audio_effects.conf and placing it in /system/vendor/etc):
Click to expand...
Click to collapse
Thanks for your long answer, will be trying the files if this module fails again.
Also im not on a LOS Based Rom, im on OOS and GravityBox
byReqz said:
Thanks for your long answer, will be trying the files if this module fails again.
Also im not on a LOS Based Rom, im on OOS and GravityBox
Click to expand...
Click to collapse
Just seeing if I can help! And I did the same sequence of steps on OOS as well ... But I haven't run gravity box in awhile. Hope it works out for you.
reaper000 said:
Just seeing if I can help! And I did the same sequence of steps on OOS as well ... But I haven't run gravity box in awhile. Hope it works out for you.
Click to expand...
Click to collapse
I tried everything but it still needs a restart to be working sometimes, do you know if i have to disable dirac or something?
byReqz said:
I tried everything but it still needs a restart to be working sometimes, do you know if i have to disable dirac or something?
Click to expand...
Click to collapse
I haven't messed with dirac at all, and v4a still works for me.
Some clarification, please:
Did you uninstall the v4a magisk module that came with xXx and reboot?
Then go to magisk manager and install v4a fx materialized1.7 and follow the rest of the steps outlined in my post?
reaper000 said:
I haven't messed with dirac at all, and v4a still works for me.
Some clarification, please:
Did you uninstall the v4a magisk module that came with xXx and reboot?
Then go to magisk manager and install v4a fx materialized1.7 and follow the rest of the steps outlined in my post?
Click to expand...
Click to collapse
yeah, its 1.7 from magisk repo, disabling dirac seems to help a bit but not everytime
byReqz said:
yeah, its 1.7 from magisk repo, disabling dirac seems to help a bit but not everytime
Click to expand...
Click to collapse
And you replaced the audio_effects.conf file in /system/vendor/etc with the one from the downloaded zip?
(Sorry to belabor the point, but it's not clear to me you tried all that)
After two years being stuck on an unrooted phone (Huawei), I'm thrilled to have everything working on OP7 x TWRP x Magisk.
On several threads I have read suggestions of Xposed modules that could be interesting, and saw that @topjohnwu published a thread with an Xposed installer apk and Xposed module for Magisk, which sounds amazing.
My question is: on OnePlus, does this work well, or would it be asking for trouble? The last thing I want now that everything is working is to make a wrong move that gets me into boot loops.
Also, if this is confirmed to work well, I see that there are several Xposed modules in the Magisk download section.
Is it "Xposed Framework, v90-beta3 created by rovo89"? Or the Tai Chi one, or the Riru ones?
Thanks for any advice!
Use edxposed, no problems so far for me
My biggest question is with Snapchat. I've read people getting banned because of using Xposed (even if no Snapchat specific module's are used).
Can anyone confirm or deny this? I just want to use it for a couple of modules like Amplify.
Its a bad idea! Snapchat thinks you use 3rd party app... Been locked out 3 times now...
In case this can help someone else, I should let you know that trying to install the "Xposed Framework v90-beta3 by rovo89" from inside Magisk has brought me a lot of heartaches (boot loop, factory reset, still struggling to get a stable system back).
Maybe the problem is not related to that module specifically, but here is what happened. It seemed to install, but when I looked at it in the "Modules" section, every section said "unknown". So I flagged it for deletion, and on reboot the phone entered a boot loop.
I tried to uninstall the module via mm, but it didn't show. So I uninstalled Magisk via Magisk-Uninstall in TWRP. The phone booted, but when I reinstalled Magisk, the boot loop restarted.
Since then, I have done two factory resets: one via the basic TWRP "Wipe", one via OOS / Settings / System. Each time, some files from before are left on the SD card. I thought that the problem was solved, but after two hours working to set up the phone (not downloading Magisk modules, just Apps from the Play Store), I got a new boot loop. Luckily this time I had done a backup. But will be looking for a way to do a more "aggressive" factory reset.
Anyhow, maybe I installed the wrong Xposed, but thought I'd share my experience.
who ah way said:
In case this can help someone else, I should let you know that trying to install the "Xposed Framework v90-beta3 by rovo89" from inside Magisk has brought me a lot of heartaches (boot loop, factory reset, still struggling to get a stable system back).
Maybe the problem is not related to that module specifically, but here is what happened. It seemed to install, but when I looked at it in the "Modules" section, every section said "unknown". So I flagged it for deletion, and on reboot the phone entered a boot loop.
I tried to uninstall the module via mm, but it didn't show. So I uninstalled Magisk via Magisk-Uninstall in TWRP. The phone booted, but when I reinstalled Magisk, the boot loop restarted.
Since then, I have done two factory resets: one via the basic TWRP "Wipe", one via OOS / Settings / System. Each time, some files from before are left on the SD card. I thought that the problem was solved, but after two hours working to set up the phone (not downloading Magisk modules, just Apps from the Play Store), I got a new boot loop. Luckily this time I had done a backup. But will be looking for a way to do a more "aggressive" factory reset.
Anyhow, maybe I installed the wrong Xposed, but thought I'd share my experience.
Click to expand...
Click to collapse
That isn't edexposed and isn't supported on pie
Arden144 said:
That isn't edexposed and isn't supported on pie
Click to expand...
Click to collapse
Thank you!
Will try edexposed on the next install, after backing up.
Ha, looking in Magisk / Downloads / Search / Xposed, I see two versions of EdXposed:
- Riru - EdXposed v0.4.5.1_beta(4463) (SandHook)
- Riru - EdXposed v0.4.5.1_beta(4463) (YAHFA)
Which one for OP7: SandHook, or YAHFA?
Thanks in advance.
who ah way said:
Ha, looking in Magisk / Downloads / Search / Xposed, I see two versions of EdXposed:
- Riru - EdXposed v0.4.5.1_beta(4463) (SandHook)
- Riru - EdXposed v0.4.5.1_beta(4463) (YAHFA)
Which one for OP7: SandHook, or YAHFA?
Thanks in advance.
Click to expand...
Click to collapse
Either. I used YAHFA with no issues for what i needed. Then i tried SandHook out of curiosity and found no difference.
Asking for trouble
Thank you both.
After TWRP backup, installed edexposed which involved three steps:
- riru exexposed core module (in Magisk)
- riru edexposed module by yahfa (Magisk)
- edexposed installer app (from GitHub)
EdXposedInstaller_v2.2.4-release.apk
https://github.com/solohsu/XposedInstaller/releases
System rebooted, SafetyNet status OK in Magisk.
As far as y'all know is this list of modules known to work on OP7?
Wouldn't even know where to start… But curious.
Edit: when I went to do a new Backup, the TWRP menu was unusual (it asked new questions about modifying the system). Decided to backpedal and restore to before exposed installation.
In the end, I just don't know enough to understand what risks I'm taking. In the hands of an expert user, it's probably safe, in mine, it's asking for trouble.
Android 10 comes earlier than expected, but there's no twrp to flash Magisk to gain root access. I tried to use SAR method to patch boot image, and it actually worked:
Requirements:
- A PC with ADB environment setup. * If you are using macOS, try to use a Virtual machine instead.
- XperiFirm to download Android 10 firmware.
- Magisk Manager App.
- unsin.exe program to extract sin file. Download here.
Instructions:
1. download the latest Android 10 firmware from XperiFirm, the current one is 52.1.A.0.532
2. open the downloaded folder and find boot_X-FLASH-ALL-B6B5.sin file. it may vary on XZ2C, but it surely will start with `boot_X-FLASH-ALL` .
3. drag the boot_X-FLASH-ALL-B6B5.sin file over unsin.exe to extract boot image, then you will get boot_X-FLASH-ALL-B6B5.img in the same directory.
4. Copy boot_X-FLASH-ALL-B6B5.img into your phone.
5. Install Magisk manager app, and make sure your phone is connected to the internet
6. Press Install → Install → Select and Patch a File, and select boot_X-FLASH-ALL-B6B5.img
7. Copy the patched image from your device to your PC, then flash it with fastboot command:
Code:
fastboot flash boot_a magisk_patched.img
fastboot flash boot_b magisk_patched.img
fastboot reboot
after reboot the devices, your XZ2 is should be rooted, but it probably not pass SafetyNet Check, you can use MagiskHide Props Config Module to fix it.
I can't find the way to leave the boot image and patched boot image down below as the attachments, but even if I did, I still suggest to do it manually, just in case I am an idiot and it might broke your phone.
stupid question, but do I have to unlock my bootloader first?
Ressax said:
stupid question, but do I have to unlock my bootloader first?
Click to expand...
Click to collapse
In official way, google it and you will passed to the sony site.
Okay, but am I losing my warranty?
Ressax said:
Okay, but am I losing my warranty?
Click to expand...
Click to collapse
Read the info on the sony site
can you share the unsin.exe?
found it
https://forum.xda-developers.com/crossdevice-dev/sony/tool-unsin-sin-v3-unpacker-t3128106
Ressax said:
Okay, but am I losing my warranty?
Click to expand...
Click to collapse
Yes.
And your DRM keys, video enhancement, Netflix with 480p and no HDR, some bank apps and a lot of other things.
Hingbong said:
can you share the unsin.exe?
found it
https://forum.xda-developers.com/crossdevice-dev/sony/tool-unsin-sin-v3-unpacker-t3128106
Click to expand...
Click to collapse
Thank you bro, I was edit this post in a rush, forget to add the unsin unpacker
Luhccas-X10 said:
Yes.
And your DRM keys, video enhancement, Netflix with 480p and no HDR, some bank apps and a lot of other things.
Click to expand...
Click to collapse
is it still true after Pie update?
hary232 said:
is it still true after Pie update?
Click to expand...
Click to collapse
This is independent of any android version.
Unlocking the bootloader means erasing all important cert keys, image enhancements (both on screen and on camera) and revoking the security verification of some applications.
Thanks for posting this! Figured I'm chime in with my experience:
1. I'd recommend wiping userdata when upgrading to Android 10 - I don't know if this is strictly necessary, but I do know that I haven't experienced the unresponsive fingerprint sensor issue others have mentioned, or any other issues.
2. If you want to use Xposed modules like GravityBox, don't install EdXposed! The versions in the Magisk stable repository are not compatible with Android 10 and will bootloop, and even the beta version 0.4.6.0 from https://github.com/ElderDrivers/EdXposed/releases doesn't work with any module I tried.
3. Fortunately, https://taichi.cool/ works perfectly with GravityBox! Install it along with its Magisk module, and then install GravityBox Q beta 6 from https://forum.xda-developers.com/xposed/modules/app-gravitybox-v10-0-0-beta-1-android-10-t3974497.
works on my xz2c
@everyone who is interested in getting EdXposed working with Android 10
You need to add the following Magisk modules:
1. Riru - Core 19.6 from here
2. EdXposed-SandHook-0.4.6.1 from here (not the YAHFA version!)
Further you need to install the most current Xposed Manager app from here (the default Xposed Installer app won't work, so deinstall it!).
After a soft reboot, it should work :good:
Most probably it'll break Safety Net (have a look inside Magisk Manager). As a workaround, you have to open Xposed Manager and black-list the following:
- Google PlayStore
- Google Play Services
- Google-Services-Framework
Reboot system
Done!
> Apply your modules (maybe not every module will work. I have successfully tested AFWall+ and XprivacyLUA)
@serajr
Thanks a lot for your kind help to get this working :highfive:
Klaus N. said:
@everyone who is interested in getting EdXposed working with Android 10
You need to add the following Magisk modules:
1. Riru - Core 19.6 from here
2. EdXposed-SandHook-0.4.6.1 from here (not the YAHFA version!)
Further you need to install the most current Xposed Manager app from here (the default Xposed Installer app won't work, so deinstall it!).
After a soft reboot, it should work :good:
Most probably it'll break Safety Net (have a look inside Magisk Manager). As a workaround, you have to open Xposed Manager and black-list the following:
- Google PlayStore
- Google Play Services
- Google-Services-Framework
Reboot system
Done!
> Apply your modules (maybe not every module will work. I have successfully tested AFWall+ and XprivacyLUA)
@serajr
Thanks a lot for your kind help to get this working :highfive:
Click to expand...
Click to collapse
Hello, thanks for this little tutorial !
However, on another thread, ppl aren't singing the same tune ! Look at this answer that I get. @Ænimal explained me that YAHFA version should be better, especially if I want to use XPrivacyLUA.
I guess I should follow your instruction, but I downgraded my XZ2C to Android 9 from 10. I don't know if it will work as you.
I tried with this version of EdXposed : magisk-EdXposed-SandHook-v0.4.6.0_beta.4471.-release.zip and after installed Riru succesfully, I installed SandHook v0.4.6.0 and I get a bootloop issue on my phone.
So I guess I have to try SandHook v0.4.6.1 and if it doesn't work I should try YAHFA v0.4.6.1.
stilflip said:
Hello, thanks for this little tutorial !
However, on another thread, ppl aren't singing the same tune ! Look at this answer that I get. @Ænimal explained me that YAHFA version should be better, especially if I want to use XPrivacyLUA.
I guess I should follow your instruction, but I downgraded my XZ2C to Android 9 from 10. I don't know if it will work as you.
I tried with this version of EdXposed : magisk-EdXposed-SandHook-v0.4.6.0_beta.4471.-release.zip and after installed Riru succesfully, I installed SandHook v0.4.6.0 and I get a bootloop issue on my phone.
So I guess I have to try SandHook v0.4.6.1 and if it doesn't work I should try YAHFA v0.4.6.1.
Click to expand...
Click to collapse
I've always used to install YAHFA builds till android 9, with no issues. So, while you're on android 9, YAHFA is the answer!
SandHook builds, on android 10, FOR NOW, seem to cause less error than YAHFA (at least in the logs - verbose/modules), that's why I'm using it.
But, as soon as EdXposed's dev releases an android 10 YAHFA fixed version, I flash it!
Klaus N. said:
@everyone who is interested in getting EdXposed working with Android 10
You need to add the following Magisk modules:
1. Riru - Core 19.6 from here
2. EdXposed-SandHook-0.4.6.1 from here (not the YAHFA version!)
Further you need to install the most current Xposed Manager app from here (the default Xposed Installer app won't work, so deinstall it!).
After a soft reboot, it should work :good:
Most probably it'll break Safety Net (have a look inside Magisk Manager). As a workaround, you have to open Xposed Manager and black-list the following:
- Google PlayStore
- Google Play Services
- Google-Services-Framework
Reboot system
Done!
> Apply your modules (maybe not every module will work. I have successfully tested AFWall+ and XprivacyLUA)
@serajr
Thanks a lot for your kind help to get this working :highfive:
Click to expand...
Click to collapse
Hell yeah ! This method worked for me !
I have a XZ2C (H8324) on Android 9 (build 52.0.1.8.131), and I follow step by step your tutorial, and everything worked like a charm !
I installed XPrivacyLua, it seems working. I'll post here if I have any issue to report !
Thanks !
Backup TA
Thank you for your post
Sorry for going offtopic, but can someone give info on how to safely backup TA? I spent two days but couldn't find any info on how to do it on (at the moment, latest) stock Android 10 (52.1.A.0.532) on H8324 (XZ2c).
The way I understand for this root procedure to work, I need to unlock bootloader, and that means losing DRM keys. Is there any info on how to restore bootloader and DRM keys after I finish rooting my device?
I tried to:
1) Downgrade to stock Android 8.
2) Use backupTA_v2 or FlashTool to backup TA.
But that doesn't work.
maricn said:
Thank you for your post
Sorry for going offtopic, but can someone give info on how to safely backup TA? I spent two days but couldn't find any info on how to do it on (at the moment, latest) stock Android 10 (52.1.A.0.532) on H8324 (XZ2c).
The way I understand for this root procedure to work, I need to unlock bootloader, and that means losing DRM keys. Is there any info on how to restore bootloader and DRM keys after I finish rooting my device?
I tried to:
1) Downgrade to stock Android 8.
2) Use backupTA_v2 or FlashTool to backup TA.
But that doesn't work.
Click to expand...
Click to collapse
Hello there,
If you unlock your bootloader on Android 8, DRM keys will be lost on Android 8 so you'll lost camera definitely.
However, on Android 10 and 9, you won't lost DRM keys. Take care, you'll loose camera preview on Android 9 with this version of build and lower : 52.0.A.3.84.
So better to upgrade at least to Android 9, and the lower firmware where camera isn't bugged at all when you unlock bootloader is Android 9 (52.0.A.8.131).
Conclusion : for rooting your device, you need to unlock your bootloader. If you're running on Android 10 (build 52.1.A.0.532) then, everything will be ok, I did it myself and everything worked fine.
If you need more help on how to downgrade your firmware, just let me. Personally, I didn't like Android 10 so I came back to Android 9 (52.0.A.8.131)
So, if unlocking bootloader on android 10 we won't lose the DRM keys or any other functionality?
DUMIY said:
So, if unlocking bootloader on android 10 we won't lose the DRM keys or any other functionality?
Click to expand...
Click to collapse
You will lost he drm keys always when unlock the bootloader on an xperia device.
Hello. I understand that Xposed Framework does not exist for our Galaxy A51. Of course, all due to lack of support TWRP. Actually, the question is: is it possible to install Xposed without Recovery and if so how to do it? Magisk installed by patching boot.img file. Is it possible to do this with Xposed?
Hello, I did root with this video https://www.youtube.com/watch?v=oZD2jkkKX_E&list=LL&index=4&ab_channel=InvisibleDiamond and then install TWRP from this thread https://forum.xda-developers.com/galaxy-a51/how-to/searching-twrp-sm-a515f-t4132751/page7 and then install xposed from Magisk, I only have 3 modules but none download it from xposed, so I wouldn’t know if there is any compatible module, I hope I helped you, I’m not very good at explaining and I have to use translator haha
Nachopincha said:
Hello, I did root with this video https://www.youtube.com/watch?v=oZD2jkkKX_E&list=LL&index=4&ab_channel=InvisibleDiamond and then install TWRP from this thread https://forum.xda-developers.com/galaxy-a51/how-to/searching-twrp-sm-a515f-t4132751/page7 and then install xposed from Magisk, I only have 3 modules but none download it from xposed, so I wouldn’t know if there is any compatible module, I hope I helped you, I’m not very good at explaining and I have to use translator haha
Click to expand...
Click to collapse
This tutorial is really simple. There, 90% of the video needs to be cut.
Is this TWRP working? Can he write the /system section?
Nachopincha said:
Hello, I did root with this video https://www.youtube.com/watch?v=oZD2jkkKX_E&list=LL&index=4&ab_channel=InvisibleDiamond and then install TWRP from this thread https://forum.xda-developers.com/galaxy-a51/how-to/searching-twrp-sm-a515f-t4132751/page7 and then install xposed from Magisk, I only have 3 modules but none download it from xposed, so I wouldn’t know if there is any compatible module, I hope I helped you, I’m not very good at explaining and I have to use translator haha
Click to expand...
Click to collapse
Man, how u can install Xposed??
elenvernied said:
This tutorial is really simple. There, 90% of the video needs to be cut.
Is this TWRP working? Can he write the /system section?
Click to expand...
Click to collapse
The TWRP only installed it, you would have to ask whoever is doing it, honestly do not use it since there is nothing to install for this cell phone
elenvernied said:
Man, how u can install Xposed??
Click to expand...
Click to collapse
From Magisk, installing riru core and riru EdXposed! You see the edxposed icon in the applications and when you want to enter, it tells you to install the original application or something like that, I don’t remember well
Nachopincha said:
The TWRP only installed it, you would have to ask whoever is doing it, honestly do not use it since there is nothing to install for this cell phone
From Magisk, installing riru core and riru EdXposed! You see the edxposed icon in the applications and when you want to enter, it tells you to install the original application or something like that, I don’t remember well
Click to expand...
Click to collapse
Have you tried installing any modules at all? For example, a substratum module? Does it work with the Substratum program?
Hi I have a way to install Xposed without root.
Really! Tested On VMOS.
Download the file, tutorial is in the file.
File Size is Big,sorry about that.
Good luck.
Morteza hacker said:
Hi I have a way to install Xposed without root.
Really! Tested On VMOS.
Download the file, tutorial is in the file.
File Size is Big,sorry about that.
Good luck.
Click to expand...
Click to collapse
If this works tell me
I should be getting the device in a few days and want to install EdXposed ASAP. I have found a few references of folks who did this but it's not clear whether it's on Android 11 or not.
If any one has been able to install EdXposed and get it running, it would be great if they can share the links to the framework and manager they used. And of course, their experience and tips
This would help the community of Pixel 4a users
Here is how I got it working
Obviously you have a rooted device running Android 11, with Magisk installed.
Install EdXposed Manager v4.5.7.
From the canary tab download the YAHFA/ Sandhook drivers (zip) . Note that downloaded version may have a different name from the file name in canary tab, in my case
Which one did you flash? Yahfa or Sandhook?
Neither one of those show up for me. I tried flashing framework and it says incompatible device.
Okluzhion said:
Which one did you flash? Yahfa or Sandhook?
Click to expand...
Click to collapse
Sorry for the delay. I didn't get the notification
YAHFA. But note that when I flashed, every thing was fine. In between, probably some Play Store updates broke camera and recorder. Uninstalling updates fixed the problem