Related
Android 4.2.2 / Jelly Bean for Toshiba Folio 100
This is the current state of CyanogenMod 10.1 for the Toshiba Folio 100
It is an update from DerArtem's version. I call it Beta 1 (not because it is béta software, but I wanted to restart renumbering instead of calling it Alpha 3)
Added
- Overclock up to 1.6Ghz (tough 1.6 does not increase performance in bechmarks on top of 1.4Ghz) -> Max score in antutu between 11500 and 12500. Be careful, not all units can go up to 1.6Ghz.
- Reclaimed 15Mb from the HDMI buffer (a little bit more memory)
- Latest CM10.1
- some clock fixes (20121215) + SOD workaround for 1.6Ghz (20121220)
- enabled low mem patch in cm10.1 patch (20121220)
- deadline I/O scheduler (not by default, but can be enabled in developer mode) (20140107)
- some exernel libs were not compiled in (could fix huwei usb stick) (20140107)
What does not work
- Everything that didn't work in Derartem's Alpha 2
- HDMI (though this also didn't work on my Folio in Derartem's Alpha 2)
Also see Alpha 2 notes:
CM10.1 Alpha2
Installation:
Install the correct recovery using fastboot (3Xpower & Vol+, fastboot erase recovery, fastboot flash recovery recovery.img)
Copy everything on an SD card and install the ROM using the recovery (Power&Vol+, Vol+, Vol-, Vol+).
Important for everyone having the 4Gb /data partition:
You must do a full wipe and format "/data and /data/media (/sdcard)" before installing the ROM using CWM recovery. /data partition will then be 12Gb.
Notes (for anyone who want to try):
- Recovery didn't change, so you can probably use the Derartem's recovery
- You can try upgrade the ROM without wipe if your previous ROM was Derartems CM10.1 alpha 2 (just install it in recovery)
Download
Recovery
CM 10.1 installation file (zip) 20131215
CM 10.1 installation file (zip) 20131220
CM 10.1 installation file (zip) 20140107
Gapps:
Gapps non-neon
Source code
Kernel source
Credits:
DerArtem
Nopy
m32
guevor
The Cyanogenmod Team
The other Tegra Dev Teams where we have borrowed code (Adam, GTab, Vega, AC100, Acer Iconia, Xoom)
Have a problem.. 1'4 and perfomance does stop my folio.. and the tabletui zip wont install on this beta, trying to install the oc kernels but only get text!.. could you help me... i was waiting so long for a OC!. Thx!!
uc370 said:
Have a problem.. 1'4 and perfomance does stop my folio.. and the tabletui zip wont install on this beta, trying to install the oc kernels but only get text!.. could you help me... i was waiting so long for a OC!. Thx!!
Click to expand...
Click to collapse
Can you tell me what you are trying to do?
The zip installer already has the newest kernel in there (max 1.6, but with lp0 sleep), so no need to install the kernels.
Does it stop immediately after selecting 1.4 ghz, or a bit after?
The performance governor keeps speed at max all the time. This will get the cpu overheated after some time. I would suggest the combination of 1.4 and interactive (= only run at 1400 up when needed)
Also a good tip: try lagFix (fstrim) from the play store. It runs fstrim on the ssd.
I'll check the links of the kernels
spicyalan said:
Can you tell me what you are trying to do?
The zip installer already has the newest kernel in there (max 1.6, but with lp0 sleep), so no need to install the kernels.
Does it stop immediately after selecting 1.4 ghz, or a bit after?
The performance governor keeps speed at max all the time. This will get the cpu overheated after some time. I would suggest the combination of 1.4 and interactive (= only run at 1400 up when needed)
Also a good tip: try lagFix (fstrim) from the play store. It runs fstrim on the ssd.
I'll check the links of the kernels
Click to expand...
Click to collapse
google in its repositories for tegra kernel has the same problem, currently they work on LP2 - so we are not alone.
Hav You access to other device with tegra 2 chip ? I have xoom 2, but it isnt mine - from my custommer, so bricking it is a bad idea
m32 said:
google in its repositories for tegra kernel has the same problem, currently they work on LP2 - so we are not alone.
Hav You access to other device with tegra 2 chip ? I have xoom 2, but it isnt mine - from my custommer, so bricking it is a bad idea
Click to expand...
Click to collapse
As far as I know, there is almost no tegra 2 device completely without sod (see forums, even the galaxy R has problems). Some version are better than others, and some stock roms are good in hiding it.
I have access to a sony tablet with a tegra 2. But it is not a developer friendly device.
It has quite a big batterry, and judging from how it sleeps: it does not go into sleep mode and keeps wifi on (loosing 30% battery in 8 hours of sleep). Compared to the battery size of the folio (which drains 80% in 8 hours with wifi lock, but has a smaller and worn battery), it means the sony tablet does not sleep at all and just disables the screen.
spicyalan said:
Can you tell me what you are trying to do?
The zip installer already has the newest kernel in there (max 1.6, but with lp0 sleep), so no need to install the kernels.
Does it stop immediately after selecting 1.4 ghz, or a bit after?
The performance governor keeps speed at max all the time. This will get the cpu overheated after some time. I would suggest the combination of 1.4 and interactive (= only run at 1400 up when needed)
Also a good tip: try lagFix (fstrim) from the play store. It runs fstrim on the ssd.
I'll check the links of the kernels
Click to expand...
Click to collapse
Im trying all combinations.. A2 with kernels and B1 alone.. Finally links ok.
B1 witn 1,4 freezes after 10-20 seconds of use at 1400.. Interactive works better than ondemand..
Does anyone hace problems With google play?.. it gives error upgrading or downloading
uc370 said:
Im trying all combinations.. A2 with kernels and B1 alone.. Finally links ok.
B1 witn 1,4 freezes after 10-20 seconds of use at 1400.. Interactive works better than ondemand..
Does anyone hace problems With google play?.. it gives error upgrading or downloading
Click to expand...
Click to collapse
Not all Tegra2's are created equal, so some might respond better or worse on overclocks.
V1 has quite some agressive overvolting, so doesn't overclock well. All after (including the kernel in B1) have lower voltages.
There is now a V4 kernel with work towards the SOD issue and some small adjustments in the overclocking at 1.4 and 1.6 Ghz.
I don't have an issue with google play. Did you install the non-neon google apps (linked on both A2 an B1)?
So good!... no freezes.. overclocked to 1400. Smooth and fast!!
Thx!!!! New tablet again? With B2
uc370 said:
So good!... no freezes.. overclocked to 1400. Smooth and fast!!
Thx!!!! New tablet again? With B2
Click to expand...
Click to collapse
Cool - same result 1400 without freeze at boot and while working, previous rom just stopt at cm-boot icon, next one at 1.4 just makes some artefacts - but this one just works.
Big thanks
---------- Post added at 10:49 PM ---------- Previous post was at 10:42 PM ----------
spicyalan said:
As far as I know, there is almost no tegra 2 device completely without sod (see forums, even the galaxy R has problems). Some version are better than others, and some stock roms are good in hiding it.
I have access to a sony tablet with a tegra 2. But it is not a developer friendly device.
It has quite a big batterry, and judging from how it sleeps: it does not go into sleep mode and keeps wifi on (loosing 30% battery in 8 hours of sleep). Compared to the battery size of the folio (which drains 80% in 8 hours with wifi lock, but has a smaller and worn battery), it means the sony tablet does not sleep at all and just disables the screen.
Click to expand...
Click to collapse
soo bad soo good - this time we are very happy which one documentation and where did You found ? I'm very interested Yours patches give my folio second life -
---------- Post added at 10:53 PM ---------- Previous post was at 10:49 PM ----------
spicyalan said:
Android 4.2.2 / Jelly Bean for Toshiba Folio 100
This is the current state of CyanogenMod 10.1 for the Toshiba Folio 100
It is an update from DerArtem's version. I call it Beta 1 (not because it is béta software, but I wanted to restart renumbering instead of calling it Alpha 3)
Added
- Overclock up to 1.6Ghz (tough 1.6 does not increase performance in bechmarks on top of 1.4Ghz) -> Max score in antutu between 11500 and 12500
- Reclaimed 15Mb from the HDMI buffer (a little bit more memory)
- Latest CM10.1
- some clock fixes (20121215)
What does not work
- Everything that didn't work in Derartem's Alpha 2
- HDMI (tough this also didn't work on my Folio in Derartem's Alpha 2)
Also see Alpha 2 notes:
CM10.1 Alpha2
Installation:
Install the correct recovery using fastboot (3Xpower & Vol+, fastboot erase recovery, fastboot flash recovery recovery.img)
Copy everything on an SD card and install the ROM using the recovery (Power&Vol+, Vol+, Vol-, Vol+).
Important for everyone having the 4Gb /data partition:
You must do a full wipe and format "/data and /data/media (/sdcard)" before installing the ROM using CWM recovery. /data partition will then be 12Gb.
Notes (for anyone who want to try):
- Recovery didn't change, so you can probably use the Derartem's recovery
- You can try upgrade the ROM without wipe if your previous ROM was Derartems CM10.1 alpha 2 (just install it in recovery)
Download
Recovery
CM 10.1 installation file (zip)
CM 10.1 installation file (zip) with newer kernel
Gapps:
Gapps non-neon
Source code
Kernel source
Credits:
DerArtem
Nopy
m32
guevor
The Cyanogenmod Team
The other Tegra Dev Teams where we have borrowed code (Adam, GTab, Vega, AC100, Acer Iconia, Xoom)
Click to expand...
Click to collapse
1.6 the problem was sleep mode at minimal speed - now I'm waiting for sleep mode - SOD
after few minutes of sleep(power down from start menu) only reset helps
soo bad soo good - this time we are very happy which one documentation and where did You found ? I'm very interested Yours patches give my folio second life -
---------- Post added at 10:53 PM ---------- Previous post was at 10:49 PM ----------
1.6 the problem was sleep mode at minimal speed - now I'm waiting for sleep mode - SOD
after few minutes of sleep(power down from start menu) only reset helps
Click to expand...
Click to collapse
I have used this post and did the changes on top of the latest DerArtem release (source is available). For the missing information (e.g. voltage table and correct values) I looked at the Xoom and Acer sources (though these had to be adjusted later on, but they were better starting points than taking random values)
1.6ghz works fine on my unit (even in heavy 3D gaming), except for the resume SOD at this speed.
I'm currently testing a workaround (nothing fancy. Just limiting to 1Ghz when screen goes off, and restore original max after screen is turned on). It seems to work fine.
There is still no fix for the "generic" SOD some have reported on all speeds.
Something has to be different, but we don't know what. I've been trying to generate an SOD my folio the whole evening (and this morning) and resulting in having only one SOD on my Nexus 7 (2012) :silly:
everyone that wants to help with the SOD investigation, please visit this post:
post
Hi everyone.
I have a problem with connection to my Folio 100 in fastboot mode.
When I write fastboot devices appear just this: K fastboot
I think, that must be some numbers or something else, but not just a letter!!!
And when I write fastboot erase recovery, then appear this: FAILED <command write failed <No such file or directory>>
Can someone explain what I can do now?
miro_mad said:
Hi everyone.
I have a problem with connection to my Folio 100 in fastboot mode.
When I write fastboot devices appear just this: K fastboot
I think, that must be some numbers or something else, but not just a letter!!!
And when I write fastboot erase recovery, then appear this: FAILED <command write failed <No such file or directory>>
Can someone explain what I can do now?
Click to expand...
Click to collapse
No idea... Is this linux or windows?
Where did you get fastboot from (download source)?
What is the output of the command "fastboot devices"?
I have placed an update online.
- V6 kernel (SOD workaround on 1.6 Ghz overclock)
- Cyanogenmod low memory patch for dalvik: I'm not sure how much difference this will make. (My folio feels faster/smoother, but it could be a placebo effect...).
Can be installed on top of an existing CM10.1 without data loss (CWM, install zip. You might need to reinstall gapps-nonneon too)
spicyalan said:
No idea... Is this linux or windows?
Where did you get fastboot from (download source)?
What is the output of the command "fastboot devices"?
Click to expand...
Click to collapse
Windows 7 x86.
I've download fastboot from here http://forum.xda-developers.com/showthread.php?t=1941183
Output of the command "fastboot devices" is K fastboot.
I've tried with different fastboot files, but always output is the same!
When I try with "adb devices", then I got the numbers of my device, but in fastboot just K.
miro_mad said:
Windows 7 x86.
I've download fastboot from here http://forum.xda-developers.com/showthread.php?t=1941183
Output of the command "fastboot devices" is K fastboot.
I've tried with different fastboot files, but always output is the same!
When I try with "adb devices", then I got the numbers of my device, but in fastboot just K.
Click to expand...
Click to collapse
Weird,
I have adb and fastboot running on linux (the easiest way), but I also have fastboot on an X64 Windows 7 laptop for quick test-flashing. Here I just installed the Google Android SDK (and worked out-of-the-box), as long as I don't connect it when the Folio is "on" (if it is on, it will mount its files to the windows laptop, but fastboot won't work after that anymore).
All, I have some good an bad news
I have been trying to get kitkat running on the Folio 100.
Good News:
- Got it to compile and generate images.
- Got recovery working (it can install kitkat images. Due to SELINUX I got into some size issues, but got that resolved
Bad News:
- after install, it stays running on the boot animation. Any idea how to check why this happens (ADB will not work in this stage, I think)?
Other bad news:
- The battery of my folio is completely busted (the thing will only run on charger now). Only battery I found on aliexpress was €40.. which is too expensive for an old crappy tablet with a cracked screen.
Linked good news:
- As it is not useful anymore, it can be used exclusively for testing....
Keep going!!
Kitkat on our folio.. not dreamable!!
uc370 said:
Keep going!!
Kitkat on our folio.. not dreamable!!
Click to expand...
Click to collapse
I'm a bit stuck.
Recovery works (it needs a new version with Selinux), but Rom stays stuck on boot animation (and no way to debug...)
spicyalan said:
I'm a bit stuck.
Recovery works (it needs a new version with Selinux), but Rom stays stuck on boot animation (and no way to debug...)
Click to expand...
Click to collapse
Not done any android rom development, but isn't there a log output at least?
Also wasn't there some quite vital parts to the folio that KitKat dropped support for?
Would love to see this working though. Good luck!
EnergyUK said:
Not done any android rom development, but isn't there a log output at least?
Also wasn't there some quite vital parts to the folio that KitKat dropped support for?
Would love to see this working though. Good luck!
Click to expand...
Click to collapse
The xoom guys also got kitkat running.. so it is possible.
(And they use the old 2.6 kernel)
Gapps might be troublesome, but some versions with neon stuff ripped out are popping up.
Adb won't work unless it can boot (and not easy to access any log on the filesystem).
Infocus M810/T/U thread. (Also wth interesting things for m812 holders.)
Infocus m810 thread on facebook
Note:
All roms on this page are remade to use with Infocus m810 so don't flash on m812. MULTILANGUAGE
Bootloader unlock (m812/m812):
Custom recovery (m810/m812):
SUT flashable images (SUT Factory tool 3.0.8):
SUT 3.1.4 cracked.
Video tutorial SUT flashing on Android 6
ROMS M812(A/I) VN2/PHX:
Android 5.0.2 m812 OFFICAL sut. (Suitable for m810 too) to be used with SUT
cm13 for m812(a) http://forum.xda-developers.com/showpost.php?p=68355126&postcount=1110
ROMS M810(T/I/U):VNA
25/07/16 CM13 beta 2 (release) http://forum.xda-developers.com/showpost.php?p=67901403&postcount=1074
20/03/16 Android 6 custom ROM (ported from m812 ver 617A firmware)
23/02/16 Android 6 custom ROM (ported from m812 ver 6130 firmware)
27/12/15 Android 5.1.1 (internal version 511C(D updated)) (port from m812 ver 511C firmware)
Official Android Kitkat 4.4.2 (VNA-1640-0-00WW-A02)
Older roms
Older ROMs are designed for recovery installation and need some knowledge:
Before the installing of thiose ROMs you must be common with Adb/fastboot driver and installation. working fastboot.exe and adb.exe here
Im the author of this work. So feel free to ask and report.
All you install from here is on your responsibility.
m810.ROM Android 5.0.2: (October 2015) MULTILANGUAGE.
This ROM is full upgrade, so its able to install over Android 4.4.2 ROMS.
How tot install: Russian installation site
1. Put the zip file to sdcard.
2. Connect phone by USB cable. Press and hold volume down+power buttons
(10s), when phone restarts, release power button after vibrating and keep
holding volume down button until FASTBOOT message appear on screen.
3. Download boot recovery https://yadi.sk/d/v_LrtBVdk8pAj and place in fastboot/adb
folder
4. Run in cmd: fastboot boot tw101_recovery_repack_by_titovich.img
5. When recovery booted, Choose firmware UPDATE502_M810_v1.zip and
install.
In the end you should get this error: apply parsed perms lsetfilecon from
/cache to u_object_r:cache_file:s0 failed operation not supported on transport
endpoint set_metadta: some changes failed.
Ignore it. Its issue of recovery.
6 Besides, ROOT and Xposed for 5.0.X framework preinstall can be copied to
sdacard and installed same time after rom installed from boot recovery.
7. Hold power button 10 sec and reboot.
Enjoy.
5.0.2 DOWNLOAD
m810.ROM Android 5.1.1A 08/10/15 The beta version of Lollipop
5.1.1A
ROM from official 511A m812.
Same install instructions as above
Main changes
-Wifi reception better;
-GPS;
-Added buttons config, e-compass, g-sensor calibrations to display menu .
5.1.1 DOWNLOAD.
XPOSED for 5.1.1 . ROOT
Note Xposed from version 5.0 and 5.1 are different!
To flash via SUT:
ODEXED ROM Android 5.1.1B 11/15 The beta version of Lollipop
5.1.1B from official m812 511B update ROM. |For SUT installer. With
unbricking feature.
- ROM designed for odexed files so it contains resized partition for system
(by titovich). means one you install the partition table will remain - 2.5gb for
system. original system parttion is less 2gb. You will be able to install all
m810 roms but I noticed you.
-not for XPLOSED framework. The ROM is full odexed. So don't try Xposed it
will fail;
-minor changes from my side diff to previous ROM;
-fixes from Infocus to battery life.
bugs: haptics not working for hard buttons (to be fixed)
To be installed via SUT utility SUT 3.0.8: DOWNLOAD
-install SUT (drivers will be installed with SUT);
-download zip with nb0 image. Unzip.
-open nb0 image file in SUT.
-Check "Normal Download" and "Erase data".
-Download ignore warning messages.
-Flash will complete in less than 1 min.
5.1.1B for SUT DOWNLOAD LINK2
EOL
Tweaks and enchantments :
M810 service manual
http://forum.xda-developers.com/showpost.php?p=68520451&postcount=1123
Edit boot logo m81X
http://forum.xda-developers.com/showpost.php?p=68956713&postcount=1163
Other party hears the noise durine the phone call
build.prop file
persist.audio.fluence.voicecall=false
Secret codes:
*#*#4636#*#*, *#*#653837#*#*, *#*#76278#*#* Settings.
Note, never tap "USA Band", otherwise you will need to reflash modem part or firmware to make phone back to work.
*#*#873#*#* Upload service
*#*#225#*#* Calendar
*#*#2324636#*#* , *#*#232#*#*, *#*#23273#*#* ,*#*#233#*#*, *#*#231#*#*, *#*#2324678#*#* CDA
*#*#278#*#* CPUDaemon
*#*#324#*#* DebugCfg
*#*#368#*#* Device manager
*#*#3721#*#*, *#*#6721#*#*, *#*#372#*#*, *#*#672#*#*, *#*#4867#*#* High Temperature Monitor
*#*#744#*#*, *#*#628#*#* Mobile Assistant
*#*#787#*#* PackageUsageTool
*#*#227#*#* Pandora Box
*#*#272#*#* Permission Control
*#*#33546#*#* Permission Detection
*#*#793#*#*, *#*#795795#*#* Power Detective
*#*#795#*#* power Monitor
*#*#277#*#*, *#*#3277#*#* Stability Monitor
*#*#28274663#*#* TeleService
Themes pack for 511B/C:
http://forum.xda-developers.com/showpost.php?p=64725810&postcount=429
Disable buttons backlight. (pale blue led shine instead). ROOT needed.
Replace system\lib\hw\lights.msm8974.so to get rid of buttons backlight. Instead, PALE blue led will be on.
Don't forget to backup the original file.
Advanced users can control that API /sys/devices/virtual/input/touch/light_led (with echo 0,1)
There is no any other control to disable or enable it.
XPOSED framework can't do anything too
Noise fix. When party on other side is claiming on noise above your voice.
This is typical issue of dual mic QUALCOMM devices on 5+ Androids. Edit built.prop
persist.audio.fluence.voicecall=true change to false
Enable DIAG port for QXDM (QPST). Rooted.
adb shell
su
setprop persist.sys.usb.config diag,serial,mass_storage,adb
Increase speaker volume
http://forum.xda-developers.com/showpost.php?p=64566136&postcount=330
Sound volume mod working on m810
https://www.youtube.com/watch?feature=player_embedded&v=DOo7sT_JIs8
IMEI, Serial number, MEID, MAC, BT changer. Service tool (m810/m812) DANGEROUS!!!
https://drive.google.com/open?id=0B3Wy4Ok3qGszcmZlMDFCbGdwUjQ
I was trying to follow up this conversation on 4pda but i don't speak russian and google translate does a terrible job.
So a couple of questions:
Is this a multilanguage rom?
Does 2g-3g-4g work?
What about wifi?
Thanks.
will Infocus m810 get android 5.1???
there is an ota update for m812 to android 5.1 but i am unable to find the file.
My phone its on the way.Im interesting this thread
sknipas said:
I was trying to follow up this conversation on 4pda but i don't speak russian and google translate does a terrible job.
So a couple of questions:
Is this a multilanguage rom?
Does 2g-3g-4g work?
What about wifi?
Thanks.
Click to expand...
Click to collapse
Yes, its Multilanguage.
2g-3g-4g work
sknipas said:
there is an ota update for m812 to android 5.1 but i am unable to find the file.
Click to expand...
Click to collapse
If you find it, pls share, it can be used for further development.
@ heineken78
Thanks for coming here at XDA
I am daily following your good works at 4PDA and I am actually with Titovich's 5.02 rooted and i feel more than satisfied.
I take the opportunity to send you my grateful Thanks.
I will install the new update and let comment as well. I hope and wish the system repartitioning will not give any issue ( I don't like playing with root partition!!).
Question: Was not possible to make the system file as lean as possible , eg removing apk that are unnecessary or available at Playstore for everybody choice in order to avoid this modification.
Regards
good work bro. looking for rom based on 5.1 . following this thread
lolo9393 said:
@ heineken78
Question: Was not possible to make the system file as lean as possible , eg removing apk that are unnecessary or available at Playstore for everybody choice in order to avoid this modification.
Regards
Click to expand...
Click to collapse
Stock reserved place in m810 for system partition is ~1,6 gb. Making firmware less, won't bring any changes, unless repartitioning it to lets say 1,1 gb. This operation needs lot of system knowledge from people who will install it.. And profit of changes will be only 500 mb? is nothing.
m812 has partition of 3 gb, that's huge, but suitable for oxdexed roms.
repartition means- you need to change start sectors of emmc in order to set sizes of system, cache. Everything before those partitions remain the same.
Ok, tweak as promised
http://forum.xda-developers.com/showpost.php?p=63576292&postcount=2
Wow,wonderful news... i will test it,downloading...
Hi Guys!
I would like to ask that ROM by titovich, which languages contains?
Thanks
@ heineken78
I've just finished the new Rom install. I followed instructions and had no issue . Rebooted via recovery and installed my stuffs.
-Wifi reception is the same as before and always weaker than my other phones. (minus 8 db)
-GPS IS NOT GETTING ANY FIX. 25 SAT in view and no one fixed.
-New Rom is a HUGE bit of improvement and feel more pleasant and very fast.
-DISPLAY is vibrant and very well set. Automatic mode is perfect also at night reading. good
- Battery leak in stand by is impressively low. less 1% full night. very good
THANKS TO THE TEAM BUILDING FOR THIS REALIZATION.
Can we suggest next challenge to make unlock the 3G 900Mhz Euro Band N°8 in a practical way?
I care less about the 4G...
---------- Post added at 03:52 AM ---------- Previous post was at 03:40 AM ----------
[email protected] said:
Hi Guys!
I would like to ask that ROM by titovich, which languages contains?
Thanks
Click to expand...
Click to collapse
Indonesian/Deutch/ENGLISH/Espanol/Filipino/FRENCH/Portugues/VIET/Russian/chinese/ and 2 symbolic i can't know ....sorry may be Hebreu,
lolo9393 said:
Can we suggest next challenge to make unlock the 3G 900Mhz Euro Band N°8 in a practical way?
I care less about the 4G...
---------- Post added at 03:52 AM ---------- Previous post was at 03:40 AM ----------
Click to expand...
Click to collapse
Yes Im trying that.
But for now, "adb reboot ftm" to reboot in ftm mode and enable qualcomm diag driver.
Then change nv's as written here and here. Uz mztool to calculate right entry's.
@heineken78
Thanks dude!
Its an official or unofficial translated ROM?
Im just ask the reason of hope, maybe put into some more languages too.
Im get this phone yesterday, it looks really great, but enter the recovery and fastboot mode its terrible.
Do you know TWRP or CWM recovery for this phone?
ilhi, i tried to disable backlight with .rar file you attached and it does work but i
heineken78 said:
TWEAKS:
1. Disable buttons backlight. (pale blue led shine instead). ROOT needed.
Replace system\lib\hw\lights.msm8974.so to get rid of buttons backlight. Instead, PALE blue led will be on.
Don't forget to backup the original file.
Advanced users can control that API /sys/devices/virtual/input/touch/light_led (with echo 0,1)
There is no any other control to disable or enable it.
XPOSED framework can't do anything too
Click to expand...
Click to collapse
ilhi, i tried to disable backlight with .rar file you attached and it does work but i can't adjust screen brightness in settings. Now its full bright and can't switch it low or automatic
a1dahiya said:
ilhi, i tried to disable backlight with .rar file you attached and it does work but i can't adjust screen brightness in settings. Now its full bright and can't switch it low or automatic
Click to expand...
Click to collapse
Dude, this is patched driver the from the build on first page. Drivers are different on stock502(titovich) so you may have an issue.
what should i do please help me
heineken78 said:
Dude, this is patched driver the from the build on first page. Drivers are different on stock502(titovich) so you may have an issue.
Click to expand...
Click to collapse
What should I do, please help me out
---------- Post added at 08:46 AM ---------- Previous post was at 08:38 AM ----------
a1dahiya said:
What should I do, please help me out
Click to expand...
Click to collapse
What drivers to change or any other change of value .....?
I'm on stock lollipop 5.0.2 rooted
I also tried to replace the patched file with original which I copied before replacing but nothing helped
Hi all,
I have created TWRP3.0 for Ulefone Be Touch 3 and also new version TWRP 3.0.2-1 Both available here:
https://drive.google.com/folderview?id=0BwdRTuyj12_yNFNZeHQxc1FZaG8&usp=sharing
Also custom boot images ares available in the same link that add init.d support and exposes LMK settings for adjustment. Use the version that is for the ROM you have installed - either "Pure" or "Original".
Enjoy
Performance and battery improvements part 1
step 1
Install latest TWRP3.0 as in first post.
step 2
Install SuperSu package. 2.46, 2.49, 2.52 or 2.67 all work equally as well. Do not use dodgy rooting packages that are mostly malware.
step 3
Install latest Busybox 1.24.2 from here:
https://drive.google.com/file/d/0BwdRTuyj12_yY01jZGFTZi14X3c/view?usp=sharing
Flash zip in TWRP
step 4
To improve battery
Edit /system/etc/perfservscntbl.txt
CMD_SET_CPU_CORE, SCN_APP_TOUCH, 1
CMD_SET_CPU_FREQ, SCN_APP_TOUCH, 598000
CMD_SET_CPU_CORE, SCN_SW_FRAME_UPDATE, 2
CMD_SET_CPU_FREQ, SCN_SW_FRAME_UPDATE, 819000
CMD_SET_CPU_CORE, SCN_APP_SWITCH, 2
CMD_SET_CPU_FREQ, SCN_APP_SWITCH, 819000
CMD_SET_CPU_UP_THRESHOLD, SCN_SW_FRAME_UPDATE, 80
CMD_SET_CPU_DOWN_THRESHOLD, SCN_SW_FRAME_UPDATE, 65
CMD_SET_CPU_CORE, SCN_APP_LAUNCH, 4
CMD_SET_CPU_FREQ, SCN_APP_LAUNCH, 1144000
Possible cpu frequencies are: 1300000 1235000 1144000 1040000 819000 598000 442000 299000
Performance and battery improvements part 2
step 5
Enable init.d support by installing latest custom boot.img from post #1
Flash boot.img to boot partition using TWRP
step 6
Create an init.d tweak file:
Create a new file in /system/etc/init.d called 01_tweaks with 0755 permissions and the following text:
Code:
#!/system/bin/sh
# Valid CPU Freqs
# 1235000 1144000 1040000 819000 598000 442000 299000
# Tweak CPU Governor
echo 819000 > /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq
echo 85 > /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load
echo "90 299000:80 819000:90 1144000:95 1300000:99" > /sys/devices/system/cpu/cpufreq/interactive/target_loads
echo 50000 > /sys/devices/system/cpu/cpufreq/interactive/timer_rate
echo 15000 > /sys/devices/system/cpu/cpufreq/interactive/min_sample_time
echo 15000 > /sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay
echo 20000 > /sys/devices/system/cpu/cpufreq/interactive/timer_slack
#Tweak IO Scheduler
echo deadline > /sys/block/mmcblk0/queue/scheduler
echo 256 > /sys/block/mmcblk0/queue/read_ahead_kb
#Tweak LMK
echo "2048,4096,8192,16384,24576,32768" > /sys/module/lowmemorykiller/parameters/minfree
#Enable zram
echo 1073741824 > /sys/block/zram0/disksize ### 536870912 = 512MB 1073741824 = 1GB
/system/bin/mkswap /dev/block/zram0
/system/bin/swapon /dev/block/zram0
#If zram is disabled, enable this line
#echo 0 > /proc/sys/vm/swappiness
#Tweak Entropy
echo 512 > /proc/sys/kernel/random/read_wakeup_threshold
echo 1024 > /proc/sys/kernel/random/write_wakeup_threshold
#Tweak for wifi router connection issues
echo 1 > /proc/sys/net/ipv6/conf/wlan0/disable_ipv6
# Disable debugging on some modules
echo "0" > /sys/module/alarm_dev/parameters/debug_mask;
echo "0" > /sys/module/alarmtimer/parameters/debug_mask;
echo "0" > /sys/module/binder/parameters/debug_mask;
Tip: Always leave a blank line at the end of script files.
Reboot to take effect.
Using a cpu monitoring app such as cpu-z or similar, watch the cpu frequency. With no activity, it should sit on 299MHz with occasional wandering as background activities demand some cpu attention.
On a simple touch, the freq should rise to 598MHz on one core only. On scrolling or swiping the screen, 2 cores should be running at 819MHz.
These settings are designed to give the best compromise between battery use and performance. Use in the real world for a few days before coming to a conclusion. Benchmarks are irrelevant.
And please don't use other tweak scripts that promise the world!!!
thank you.
I'm very happy to see something for this phone.
If i try i will comment.
see u
ok no brick!!!
with busybox the phone is many more faster, i can't tell about the init.d script, i come to put it in init.d folder but the phone reboot ok
Anybody tried this?
i got it in my phone; everything it's ok.
i have init.d support with one apk to do this (more easy).
you can try, no fear, you have in needrom everything to restore the phone.
I have made a custom boot.img with init.d support enabled (no app required) plus a few obsolete services and settings removed for faster boot and less background activity. It is based on the latest "pure" simplified ROM. Flash image using TWRP. No wipes required.
https://drive.google.com/file/d/0BwdRTuyj12_yS1lubjR1YTV0Z1E/view?usp=sharing
Edit: New version with more obsolete services removed 29/03/16
Enjoy
thank you sir
i will try your new boot.img
thanks for your hard work,.. love to see something for the be touch 3 ,.. i would love to see a cyanogenmod for this phone,... tried myselve to port, android is starting, updates apps, but hangs at android starting apps ... would be very nice to see a working cm12.
wsa told that my roms problem is the nvram folder in boot image and i dont know how to port that.
bt3 has his own audio systhem so no viper4android i tried to install worked,.. does someone know how to get viper working ??? thanks in advance
HI Mate!
Do you use the be Touch 3 in a Car?
It gets silly when you connect it to a Car Radio via Bluetooth.
I am sure its about the Phone coz a Samsung S4 and S6 works proper at same Unit.
Whats the issue i mean?
If you connect the Phone, the Unit shows the Battery and Signal Values.
So far so good.
But if the Touch 3 goes into Standby Mode the Values freeze.
They are back if you wake up the Phone out of Standby.
I already contact the Ulefone Support. But they reply only "bla bla" and nothing helpful.
They give the Issues to the Technical Support.
Who believe that? *lol
So is there a Chance to fix that Issue somehow?
guano30 said:
HI Mate!
Do you use the be Touch 3 in a Car?
It gets silly when you connect it to a Car Radio via Bluetooth.
I am sure its about the Phone coz a Samsung S4 and S6 works proper at same Unit.
Whats the issue i mean?
If you connect the Phone, the Unit shows the Battery and Signal Values.
So far so good.
But if the Touch 3 goes into Standby Mode the Values freeze.
They are back if you wake up the Phone out of Standby.
I already contact the Ulefone Support. But they reply only "bla bla" and nothing helpful.
They give the Issues to the Technical Support.
Who believe that? *lol
So is there a Chance to fix that Issue somehow?
Click to expand...
Click to collapse
the ulefone be touch 3 has a very primitive android on it, and the bluetooth driver are very old ,.. the support will not do anything in my opinion , and there is nothing u can do about the issue. sorry
nofx161 said:
the ulefone be touch 3 has a very primitive android on it, and the bluetooth driver are very old ,.. the support will not do anything in my opinion , and there is nothing u can do about the issue. sorry
Click to expand...
Click to collapse
So isnt it possible, with Root permissions, to change the Bluetooth Driver?
guano30 said:
So isnt it possible, with Root permissions, to change the Bluetooth Driver?
Click to expand...
Click to collapse
no-definetly not,.. and which driver would u use? u have to write a new bluetooth driver and use it ,.. thats a very very hard part, and ulefone doesnt make the software . another company does for almost all mtk devices, and they dont use bluetooth, they use something calledd blueangel, and its not very good, and very old,...
nofx161 said:
no-definetly not,.. and which driver would u use? u have to write a new bluetooth driver and use it ,.. thats a very very hard part, and ulefone doesnt make the software . another company does for almost all mtk devices, and they dont use bluetooth, they use something calledd blueangel, and its not very good, and very old,...
Click to expand...
Click to collapse
I was thinking about to use other BT Driver from an other Device with same Hardware.
But ok, i am a Noob at this Stuff, its only an imagination.
Or is the BT Hardware used in the be Touch 3 that unique ?
I have rooted my Device now.
At the system/app Folder you can find 2 Folders:
1. Bluetooth
2. BluetoothLe
I saw that the Elephone 8000 also have the MT6753.
So what about to use the Files from the Elephone?
Ok, i have no Idea if they are newer but isnt it worth a try?
Or am i talking totally bull****?
guano30 said:
I have rooted my Device now.
At the system/app Folder you can find 2 Folders:
1. Bluetooth
2. BluetoothLe
I saw that the Elephone 8000 also have the MT6753.
So what about to use the Files from the Elephone?
Ok, i have no Idea if they are newer but isnt it worth a try?
Or am i talking totally bull****?
Click to expand...
Click to collapse
the elephone p8000 has the same mtk u are right about that,.. but the bluetooth driver is the same old blueangel driver, but with the elephone it is only worse,.. the p8000 driver is only 8bit, ours is 16 bit audio qualityy,.. and its not that simple to only use the bluetooth driver from another mtk rom ,.. i tried to port several roms from p8000 one worked, but i dont have the device anymore to test things,... sorry
nofx161 said:
the elephone p8000 has the same mtk u are right about that,.. but the bluetooth driver is the same old blueangel driver, but with the elephone it is only worse,.. the p8000 driver is only 8bit, ours is 16 bit audio qualityy,.. and its not that simple to only use the bluetooth driver from another mtk rom ,.. i tried to port several roms from p8000 one worked, but i dont have the device anymore to test things,... sorry
Click to expand...
Click to collapse
HI Mate, thank you for your reply.
Sadly you seem to be right
I downloaded a CWM, Stock-ROM-for-TWRP-recovery-K05TS-A.A.vR13.E2.151105.rar, and unpacking the bluetooth.apk it showed to me that inside are Files from 2008.
Is there any Hope, that an other Phone with the MT6753 has a newer Version inside?
I am not that experienced in this Stuff.
If ever i would find a newer Version, would only deleting old and copy in the new BT Files in system\app do the Job?
I am not sure but maybe the CWM Team has newer Drivers for the MT6753.
So if that has a Chance to work i would make a request.
What you think?
New version of TWRP posted. This is 3.0.2-1 ready for the Android 6.0 update........
There are a ton of MT6753 devices out there but most of the software comes from exactly the same source as has been mentioned.
The Power model is almost identical to the Be Touch 3 so porting Android 6.0 from that should be relatively easy. Do not try and load the ROM directly as it will trash your partitions and soft-brick your phone. As is common practice, they have shifted the memory addresses around (read the scatter file) to make the newer model ROM incompatible but that is the easy fixed part
Before do all of this tutorial, Please keep in mind, that if you are dont have basic on Unix System dont do this!!i am buy this device just for gaming only, and i am buy secondhand on 20 April 2021.
Goals : for overclock and unleash all inside the beast in my new secondhand red magic 3
Note : I am using Macbook to do all of this, and working adb
THIS ACTION WILL IMPACT TO YOUR HARDWARE DEVICE, PLEASE MONITOR YOUR DEVICE TEMPERATURE, AND DO AT YOUR OWN RISK!!!
check adb command with :
Code:
adb devices
Step by Step1. Flash Global Rom (in my case, is still using global android 9) to China Rom : China Rom
note : using MD5:FB9ABF42A4711962272606E0437AFA12 v5.13
Optional installing GAPPS:1.1 if you are using same ROM version as mine, install GAPPS with NIKGAPPS and put nikgapps.config to root /
1.2 run command
Code:
adb push nikgapps.config /
adb push NikGapps-core-arm64-11-20201231-signed.zip /
1.3 flash with twrp with install > install zip > pick <nikgapps zip>
2. Installing TWRP // for restoring boot.img if disaster happen : TWRP
3. Installing Magisk // for root access : Magisk, After all you have done with above step, do this :
4. Installing Konabess // set frequency GPU : Konabess APK, wanna some research with Konabess? do fork and star the author on Github: github
${FREQ} = move step by step from 650 to 800, [675, 700, 725, 750, 775, 800]. try this : set 650 restart play genshin/Antutu, monitor your temperature. repeat and repeat. youtube tutorial
Click to expand...
Click to collapse
4.a. open konabess
4.b. pick "EDIT GPU FREQ TABLE", > "ADD NEW" > SET Freq : ${FREQ}Mhz, bus-freq: 11, bus-min: 11, bus-max: 11, need to research more about this
4.c. pick "EDIT GPU VOLT TABLE", > "ADD NEW" > SET Freq : ${FREQ}Mhz, voltage level : NOM_L1, need to research more about this
nb : Please aware of this voltage table, this voltage table is from here, need to re-adjust for our Red Magic 3.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4.d. and then final "Backup old image" > remember your current path for boot.img, if disaster happen, boot to bootloader > recovery, and install <your backup boot.img> with target "boot" partition.
4.e. pick "REPACK AND FLASH NEW IMAGE"
Note: i am using 700Mhz for gaming daily driver, for PUBG and GENSHIN IMPACT "RATA KANAN"
Click to expand...
Click to collapse
Antutu V9- stock rom : 510k
- before OC : 528k
- after OC : 588k
Antutu V8- before OC : 431k
- after OC : 482k
Supporting Apps :- Kernel auditor // set frequency if not in use
-- my setting for OOM (Out of Memory/Low memory killer is "Aggresive")
Additional Hardware :- Black Shark fan Pro // tested well on frequency 850Mhz, NOM_L2
CN ROM Version V5.13 Report
Works :
- shoulder button
- rotation
- no flicker
- many of them is stable
- sensor : Light, Proximity
Not works :
- sensor : Accelerometer, Magnetometer, Compass, Gyro. // was doin all of things "Wipe all on twrp except system"
Click to expand...
Click to collapse
Works with Poco X3 Pro ? Snapdragon 860 is just 855+ ?
astronomy2021 said:
Works with Poco X3 Pro ? Snapdragon 860 is just 855+ ?
Click to expand...
Click to collapse
Idk bro, I don't have poco X3 pro
It's not recommended do that after someone expert doin that.
On poco X3 pro, you just need to remove cpu throttle to improve stability performance if you don't care about heat issue
never00miss said:
Idk bro, I don't have poco X3 pro
It's not recommended do that after someone expert doin that.
On poco X3 pro, you just need to remove cpu throttle to improve stability performance if you don't care about heat issue
Click to expand...
Click to collapse
Thanks for Answer How do you remove it ? Magisk Module or someting else ?
astronomy2021 said:
Thanks for Answer How do you remove it ? Magisk Module or someting else ?
Click to expand...
Click to collapse
yup, you can use magisk module or something, the difference between gaming phone and standard phone is on heat management.
cause on standard android phone that use powerful SOC not designed to minimize heat issue.
so buy gaming phone instead of standard phone cause designed for heat issue. hahaha.
Have you completed further research on the subject?
SilentDevGuy said:
Have you completed further research on the subject?
Click to expand...
Click to collapse
for the deep research, i am not be able to do that cause my work as a programmer and have tight time to do my works.
but i was using 775 mhz for daily use,
and its was stable until this day.
whats the poin you ask that? that i can help you sir? @SilentDevGuy
never00miss said:
for the deep research, i am not be able to do that cause my work as a programmer and have tight time to do my works.
but i was using 775 mhz for daily use,
and its was stable until this day.
whats the poin you ask that? that i can help you sir? @SilentDevGuy
Click to expand...
Click to collapse
Id like to know the temperature effects. Such as how hot it runs on a heavy load for extended period of time and frame rate results
SilentDevGuy said:
Id like to know the temperature effects. Such as how hot it runs on a heavy load for extended period of time and frame rate results
Click to expand...
Click to collapse
750mhz Overclock
PUBG mobile - playing on 3.40 hours result :
- max temp : 78C
- avg temp : 65C
- min temp : 55C
Misc : using external fan
Thank you so much! How does the temperature spread across components? When at 78c is it uncomfy? I am creating a custom rom for red magic and will implement this gpu overclock
never00miss said:
750mhz Overclock
PUBG mobile - playing on 3.40 hours result :
- max temp : 78C
- avg temp : 65C
- min temp : 55C
Misc : using external fans
Click to expand...
Click to collapse
Are these battery temps, cpu temps, or gpu temps? How is your nand temperature? It is suppose to be never go past 50c(internal storage/memory)
never00miss said:
750mhz Overclock
PUBG mobile - playing on 3.40 hours result :
- max temp : 78C
- avg temp : 65C
- min temp : 55C
Misc : using external fan
Click to expand...
Click to collapse
never00miss said:
Before do all of this tutorial, Please keep in mind, that if you are dont have basic on Unix System dont do this!!i am buy this device just for gaming only, and i am buy secondhand on 20 April 2021.
Goals : for overclock and unleash all inside the beast in my new secondhand red magic 3
Note : I am using Macbook to do all of this, and working adb
THIS ACTION WILL IMPACT TO YOUR HARDWARE DEVICE, PLEASE MONITOR YOUR DEVICE TEMPERATURE, AND DO AT YOUR OWN RISK!!!
check adb command with :
Code:
adb devices
Step by Step1. Flash Global Rom (in my case, is still using global android 9) to China Rom : China Rom
note : using MD5:FB9ABF42A4711962272606E0437AFA12 v5.13
Optional installing GAPPS:1.1 if you are using same ROM version as mine, install GAPPS with NIKGAPPS and put nikgapps.config to root /
1.2 run command
Code:
adb push nikgapps.config /
adb push NikGapps-core-arm64-11-20201231-signed.zip /
1.3 flash with twrp with install > install zip > pick <nikgapps zip>
2. Installing TWRP // for restoring boot.img if disaster happen : TWRP
3. Installing Magisk // for root access : Magisk, After all you have done with above step, do this :
4. Installing Konabess // set frequency GPU : Konabess APK, wanna some research with Konabess? do fork and star the author on Github: github
4.a. open konabess
4.b. pick "EDIT GPU FREQ TABLE", > "ADD NEW" > SET Freq : ${FREQ}Mhz, bus-freq: 11, bus-min: 11, bus-max: 11, need to research more about this
4.c. pick "EDIT GPU VOLT TABLE", > "ADD NEW" > SET Freq : ${FREQ}Mhz, voltage level : NOM_L1, need to research more about this
4.d. and then final "Backup old image" > remember your current path for boot.img, if disaster happen, boot to bootloader > recovery, and install <your backup boot.img> with target "boot" partition.
4.e. pick "REPACK AND FLASH NEW IMAGE"
Antutu V9- stock rom : 510k
- before OC : 528k
- after OC : 588k
Antutu V8- before OC : 431k
- after OC : 482k
Supporting Apps :- Kernel auditor // set frequency if not in use
-- my setting for OOM (Out of Memory/Low memory killer is "Aggresive")
Additional Hardware :- Black Shark fan Pro // tested well on frequency 850Mhz, NOM_L2
CN ROM Version V5.13 Report
Click to expand...
Click to collapse
so i flashed the latest cn rom and now my gyroscope with other components are not working and then I rolled back to global and it still not working what should I do I am really stuck here please help me it bugges me its been over a week problem after problems accruing I really regret buying this pice of crap
Rebinaziz said:
so i flashed the latest cn rom and now my gyroscope with other components are not working and then I rolled back to global and it still not working what should I do I am really stuck here please help me it bugges me its been over a week problem after problems accruing I really regret buying this pice of crap
Click to expand...
Click to collapse
Its hard to help with so little information and you cant call something a piece of crap because you broke it. What rom are you on right now?
i have same problem, my sensors not working bro, plz.. help
never00miss said:
Before do all of this tutorial, Please keep in mind, that if you are dont have basic on Unix System dont do this!!i am buy this device just for gaming only, and i am buy secondhand on 20 April 2021.
Goals : for overclock and unleash all inside the beast in my new secondhand red magic 3
Note : I am using Macbook to do all of this, and working adb
THIS ACTION WILL IMPACT TO YOUR HARDWARE DEVICE, PLEASE MONITOR YOUR DEVICE TEMPERATURE, AND DO AT YOUR OWN RISK!!!
check adb command with :
Code:
adb devices
Step by Step1. Flash Global Rom (in my case, is still using global android 9) to China Rom : China Rom
note : using MD5:FB9ABF42A4711962272606E0437AFA12 v5.13
Optional installing GAPPS:1.1 if you are using same ROM version as mine, install GAPPS with NIKGAPPS and put nikgapps.config to root /
1.2 run command
Code:
adb push nikgapps.config /
adb push NikGapps-core-arm64-11-20201231-signed.zip /
1.3 flash with twrp with install > install zip > pick <nikgapps zip>
2. Installing TWRP // for restoring boot.img if disaster happen : TWRP
3. Installing Magisk // for root access : Magisk, After all you have done with above step, do this :
4. Installing Konabess // set frequency GPU : Konabess APK, wanna some research with Konabess? do fork and star the author on Github: github
4.a. open konabess
4.b. pick "EDIT GPU FREQ TABLE", > "ADD NEW" > SET Freq : ${FREQ}Mhz, bus-freq: 11, bus-min: 11, bus-max: 11, need to research more about this
4.c. pick "EDIT GPU VOLT TABLE", > "ADD NEW" > SET Freq : ${FREQ}Mhz, voltage level : NOM_L1, need to research more about this
4.d. and then final "Backup old image" > remember your current path for boot.img, if disaster happen, boot to bootloader > recovery, and install <your backup boot.img> with target "boot" partition.
4.e. pick "REPACK AND FLASH NEW IMAGE"
Antutu V9- stock rom : 510k
- before OC : 528k
- after OC : 588k
Antutu V8- before OC : 431k
- after OC : 482k
Supporting Apps :- Kernel auditor // set frequency if not in use
-- my setting for OOM (Out of Memory/Low memory killer is "Aggresive")
Additional Hardware :- Black Shark fan Pro // tested well on frequency 850Mhz, NOM_L2
CN ROM Version V5.13 Report
Click to expand...
Click to collapse
bro plz help , my sensores not working ,
SilentDevGuy said:
Its hard to help with so little information and you cant call something a piece of crap because you broke it. What rom are you on right now
Click to expand...
Click to collapse
You are right i was kinda out of my mind but anyways, i flashed it using red magic 3 unbrick tool it flashes the oldest rom which is 1.11 and worked my way to NX629J_ENcommon V1.21 cuz i thought it would fix it but it didn't, and changed a lots of gsi roms and used latest cn rom but that aslo throw me in the hole, and i read some posts here they said that you have ro flash persist.img in twrp (which comes with fastboot rom) and i couldn't find it anywhere and someone said you have to wipe everything and it fixs it but that also didn't work, its been a week and half I've read everything online even other phones having same problem but they alway fix theirs with flashing persist.img and i can't find it in the rom which they provide in their website
SilentDevGuy said:
Are these battery temps, cpu temps, or gpu temps? How is your nand temperature? It is suppose to be never go past 50c(internal storage/memory)
Click to expand...
Click to collapse
CPU temps,
And so far so good.
Rebinaziz said:
so i flashed the latest cn rom and now my gyroscope with other components are not working and then I rolled back to global and it still not working what should I do I am really stuck here please help me it bugges me its been over a week problem after problems accruing I really regret buying this pice of crap
Click to expand...
Click to collapse
1366gh said:
View attachment 5357549i have same problem, my sensors not working bro, plz.. help
Click to expand...
Click to collapse
1366gh said:
bro plz help , my sensores not working ,
Click to expand...
Click to collapse
Rebinaziz said:
You are right i was kinda out of my mind but anyways, i flashed it using red magic 3 unbrick tool it flashes the oldest rom which is 1.11 and worked my way to NX629J_ENcommon V1.21 cuz i thought it would fix it but it didn't, and changed a lots of gsi roms and used latest cn rom but that aslo throw me in the hole, and i read some posts here they said that you have ro flash persist.img in twrp (which comes with fastboot rom) and i couldn't find it anywhere and someone said you have to wipe everything and it fixs it but that also didn't work, its been a week and half I've read everything online even other phones having same problem but they alway fix theirs with flashing persist.img and i can't find it in the rom which they provide in their website
Click to expand...
Click to collapse
Do my thread, I am rollback to v3.xx latest, and do all wipe on all partition.
[Guide][Stable] How to clean Install CN ROM + TWRP + ROOT + GAPPS on our Nubia Red Magic 3
Hello guys, welcome again to my thread this thread will be my tutorial too for reminder how to reinstalling my Nubia Red Magic 3 i will tell you how to do step by step guide how to do clean Install : Requirement : - ADB installed, check with...
forum.xda-developers.com
i m using red magic 3 on android 11 china rom i m used your
Konabess,,,apk
i m expriance many frequencys
Hello guys, welcome again to my thread
this thread will be my tutorial too for reminder how to reinstalling my Nubia Red Magic 3
i will tell you how to do step by step guide how to do clean Install :
Requirement :
- ADB installed, check with command
Bash:
adb devices
Download all needed first :
First download ROM here V3.34 : http://romdownload.nubia.com/红魔3/V3.34/NX629J-update.zip
// android 11 is not stable yet, there is a lot of function like gyro and other sensor that not working
After that download TWRP here, https://forum.xda-developers.com/t/...twrp-for-nubia-red-magic-3-3s-stable.3962482/
then download Magisk APK : https://magiskmanager.com/
create a zip file from Magisk.apk -> Magisk.zip, we need both of them
then download NIK GAPPS NikGapps-core-arm64-10-20210424-signed.zip and nikgapps config, https://sourceforge.net/projects/nikgapps/files/
download nik gapps, Releases > 23 April 2021 > NikGapps-full-arm64-10-20210423-signed.zip > https://sourceforge.net/projects/ni...ps-full-arm64-10-20210423-signed.zip/download
download nik gapps config, Relaases > Config > nikgapps.config > https://sourceforge.net/projects/nikgapps/files/Releases/Config/nikgapps-config/
After download, do this carefully step by step :
Bash:
# go to download folder
cd ~/Downloads
# now on android, Settings > About Phone > click Build Number 5 times
# go to developer options with usb debugging enable
# Settings > Advanced Settings > Developers Option > Enable toggle USB Debugging > Enable toggle OEM Unlocking
# push ROM file to adb
adb push NX629J-update.zip /storage/emulated/0/
# after push go to your android,
# go to Settings > System Update > pick "..." 3 dot on top right corner > Local Update
# then install Choose from local and pick NX629J-update.zip
# Install
# now on android, after all ROM installed successful do unlock developer options
# Settings > About Phone > click Build Number 5 times
# go to developer options with usb debugging enable
# Settings > Advanced Settings > Developers Option > Enable toggle USB Debugging > Enable toggle OEM Unlocking
# then reboot to bootloader
adb reboot bootloader
# then do unlock and flash twrp
fastboot devices
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash recovery twrp-3.3.1-3-NX629J-mauronofrio.img
# and now twrp was installed, reboot with command below
# now we need to clean ROM installing
adb reboot recovery
# now on android, you can see twrp menu
# go to Wipe > Advanced Wipe > check all of thing in there
# check Dalvik/Art Cache
# check Cache
# check System
# check Vendor
# check Data
# check Internal Storage
# and "Swipe to Wipe" dont do reboot here!!! please dont do
# now push ROM zip again in twrp,
adb push NX629J-update.zip /
# if it cannot mount or said read only file system
# this step if error only !!
adb shell
# you will goin to android sh, run command mount
mount -o rw,remount /
exit
# you will goin to your shell again, do push zip again
adb push NX629J-update.zip /
# after your push now you need to enable read access again on /
adb shell
mount -o ro,remount /
exit
# now on twrp, go to Install > go to / directory, just pick "up a level" until its gone,
# and on / folder you will see NX629J-update.zip,
# and do install on NX629J-update.zip > "swipe to install"
# it will fill data on that we are wiping off
# then push Magisk.zip
adb push Magisk.zip /
# now on twrp, go to Install > go to / directory > install Magisk.zip
# then push
adb push NikGapps-core-arm64-10-20210424-signed.zip /
adb push nikgapps.config /
# now on twrp, go to Install > go to / directory > pick NikGapps-core-arm64-10-20210424-signed.zip
# > "swipe to install" > "wipe dalvik cache/cache"
# reboot to system now
adb reboot
# after you see launcher screen, do install Magisk.apk
adb install Magisk.apk
# popup will be shown on screen, and click "OK"
Now you get clean Install CN ROM with all working feature
- Disable cover detection on Screen
Settings > Lockscreen, Launcher and Theme > Toggle disable "pocket mode"
- Disable Recommeded Application
Settings > Lockscreen, Launcher and Theme > Launcher Setting > Toggle disable ["Fancy Icon", "show the first screen negative", "Recommended Applications"]
Done.
If anything mistakes happen let me know ya.
Not Working :
- Google services Push Notif on Lock Screen, bug hunter @Faonee
[Guide][Stable] How to clean Install CN ROM + TWRP + ROOT + GAPPS on our Nubia Red Magic 3
Hello guys, welcome again to my thread this thread will be my tutorial too for reminder how to reinstalling my Nubia Red Magic 3 i will tell you how to do step by step guide how to do clean Install : Requirement : - ADB installed, check with...
forum.xda-developers.com
Credit :
@Secretcow
[Guide] Unlocking Red Magic 3's Bootloader
Requirements: - To Unlock Bootloader On Nubia Red Magic 3 (NX629J), you will need a computer. - Charge the Nubia Red Magic to at least 50%. - You need a USB cable to connect your phone to PC. (Users reported better luck with usb 2.0 port vs usb...
forum.xda-developers.com
[Guide] Flashing TWRP & Granting Root Access (Magisk Systemless) - Red Magic 3
Use this guide to root for now for global rom: https://forum.xda-developers.com/red-magic-3/how-to/red-magic-3-root-guide-t3933148 Requirements: - Unlocked Bootloader On Nubia Red Magic 3 (NX629J)...
forum.xda-developers.com
Well sure I'm goona do this...well I'm waiting for the new update 红魔3/红魔3S Android R V5.14 coming soon.....
NubiaNinja said:
Well sure I'm goona do this...well I'm waiting for the new update 红魔3/红魔3S Android R V5.14 coming soon.....
Click to expand...
Click to collapse
I am not sure v5.14 is already stable yet, cause if we see v3 and v2, there is a lot of changes until it stable.
And there must plenty degraded performance instead of android 10. Cause I got AnTuTu only 450k on Android R on Rom v5.1x
never00miss said:
I am not sure v5.14 is already stable yet, cause if we see v3 and v2, there is a lot of changes until it stable.
And there must plenty degraded performance instead of android 10. Cause I got AnTuTu only 450k on Android R on Rom v5.1x
Click to expand...
Click to collapse
Yes @never00miss you were are saying right I think I'm only one who think observed feel the best update was of CN V3.34 Android 10 OF R3,but mine was something 3.04/3.09/3.11 OF R3S I can't remember ??but sure it was android 10 bruh ur saying right...review I'm playing pubg mobile for almost 12 hrs continuosly on this update V3.34 played till almost next update comes.With 90fps game mode on fan speed normal I remember I don't feel any issue lagging, shuttering or any kind of fps down and sometimes I recording too my gameplays making short clips of engaging on fights..well no problem BUT only problem I face was Render in game heavy for a bit of moment then I decided I have to upgraded to Android 11 I think so game needed but this is the time I upgraded by OTA means phone update push the new one V5.11 which was failed version of Android 11 full of bugs I used for some days then I can't play pubg mobile not running game launcher malfunctioning screen flickers and many bugs nevermind I make my mind to return back to android 10 well I think I have to put the 3.34 zip to internal storage like simple way of reboot to recovery by inbuilt recovery wipe/data/cache boom I started installing zip lol who knows the Android 11 new policy added anti-rollback...system Lol DEVICE BRICKEDDDDDD!This is Nubia fail! At that moment I knew I f_____up!
Wait for 1-2 week dead phone....since whole Chinese community of Nubia Redmagic3/3S Flooded and crying in Chinese forum then the GOD ENTERS THE CHAT "SCARLETT GLASS" POSTED SOMETHING A RECOVERY TOOL Then the issue solved TWRP flashed since then I rooted checking gsi roms and new updates V5.11 Rebrushed and rightnow I'm on V5.13 but truely I'm saying my honestly review I don't like ANDROID 11 I can't play for long periods maximum 3-4hours pubg heating so much lagging and shuttering occurs! Device heat so much exceed sometimes 50 degrees lol I don't want to lost my precious hands I don't have girlfriend yet! Lol..... I'm afraid to play for long time!
GO FOR V3.34 PEOPLES WHO LOOK.....THIS POST WELL people this is the #Antutu Score of my Android 11 CN V5.13 NUBIA REDMAGIC 3S Well this score is due to SD 855+ I think so so...never mind YOU CAN SEE THE DIFFERENCE SCORE OF R3 AND R3S CPU AN D GPU R3 WINS....
R3S Has more scored but R3 have some stability...so V3.34 wins! Even Chinese forum people confirm V3.34 was best!
note: I can't remember which version I was running on android 10 I forgot 3.04/3.09/3.11??
sorry..on my RM3S but android 10
This works on both version of RM3 right?
NubiaNinja said:
Yes @never00miss you were are saying right I think I'm only one who think observed feel the best update was of CN V3.34 Android 10 OF R3,but mine was something 3.04/3.09/3.11 OF R3S I can't remember ??but sure it was android 10 bruh ur saying right...review I'm playing pubg mobile for almost 12 hrs continuosly on this update V3.34 played till almost next update comes.With 90fps game mode on fan speed normal I remember I don't feel any issue lagging, shuttering or any kind of fps down and sometimes I recording too my gameplays making short clips of engaging on fights..well no problem BUT only problem I face was Render in game heavy for a bit of moment then I decided I have to upgraded to Android 11 I think so game needed but this is the time I upgraded by OTA means phone update push the new one V5.11 which was failed version of Android 11 full of bugs I used for some days then I can't play pubg mobile not running game launcher malfunctioning screen flickers and many bugs nevermind I make my mind to return back to android 10 well I think I have to put the 3.34 zip to internal storage like simple way of reboot to recovery by inbuilt recovery wipe/data/cache boom I started installing zip lol who knows the Android 11 new policy added anti-rollback...system Lol DEVICE BRICKEDDDDDD!This is Nubia fail! At that moment I knew I f_____up!
Wait for 1-2 week dead phone....since whole Chinese community of Nubia Redmagic3/3S Flooded and crying in Chinese forum then the GOD ENTERS THE CHAT "SCARLETT GLASS" POSTED SOMETHING A RECOVERY TOOL Then the issue solved TWRP flashed since then I rooted checking gsi roms and new updates V5.11 Rebrushed and rightnow I'm on V5.13 but truely I'm saying my honestly review I don't like ANDROID 11 I can't play for long periods maximum 3-4hours pubg heating so much lagging and shuttering occurs! Device heat so much exceed sometimes 50 degrees lol I don't want to lost my precious hands I don't have girlfriend yet! Lol..... I'm afraid to play for long time!
GO FOR V3.34 PEOPLES WHO LOOK.....THIS POST WELL people this is the #Antutu Score of my Android 11 CN V5.13 NUBIA REDMAGIC 3S Well this score is due to SD 855+ I think so so...never mind YOU CAN SEE THE DIFFERENCE SCORE OF R3 AND R3S CPU AN D GPU R3 WINS....
R3S Has more scored but R3 have some stability...so V3.34 wins! Even Chinese forum people confirm V3.34 was best!
note: I can't remember which version I was running on android 10 I forgot 3.04/3.09/3.11??
sorry..on my RM3S but android 10
Click to expand...
Click to collapse
No, you got it wrong on AnTuTu version, you are run on v9 AnTuTu that on my device it will get score on 588k, on you are on 536k
You can see the results on my thread, in this thread I am using v5.13
[OVERCLOCK] GPU overclocking | Upgrade your Red Magic 3 to Red Magic 3s | Unleash the Beast
Before do all of this tutorial, Please keep in mind, that if you are dont have basic on Unix System dont do this!! i am buy this device just for gaming only, and i am buy secondhand on 20 April 2021. Goals : for overclock and unleash all inside...
forum.xda-developers.com
Faonee said:
This works on both version of RM3 right?
Click to expand...
Click to collapse
Yup, correct, both RM3 and RM3s works very well
never00miss said:
No, you got it wrong on AnTuTu version, you are run on v9 AnTuTu that on my device it will get score on 588k, on you are on 536k
You can see the results on my thread, in this thread I am using v5.13
[OVERCLOCK] GPU overclocking | Upgrade your Red Magic 3 to Red Magic 3s | Unleash the Beast
Before do all of this tutorial, Please keep in mind, that if you are dont have basic on Unix System dont do this!! i am buy this device just for gaming only, and i am buy secondhand on 20 April 2021. Goals : for overclock and unleash all inside...
forum.xda-developers.com
Yup, correct, both RM3 and RM3s works very well
Click to expand...
Click to collapse
never00miss said:
No, you got it wrong on AnTuTu version, you are run on v9 AnTuTu that on my device it will get score on 588k, on you are on 536k
You can see the results on my thread, in this thread I am using v5.13
[OVERCLOCK] GPU overclocking | Upgrade your Red Magic 3 to Red Magic 3s | Unleash the Beast
Before do all of this tutorial, Please keep in mind, that if you are dont have basic on Unix System dont do this!! i am buy this device just for gaming only, and i am buy secondhand on 20 April 2021. Goals : for overclock and unleash all inside...
forum.xda-developers.com
Yup, correct, both RM3 and RM3s works very well
Click to expand...
Click to collapse
Yes, I looked at the thread carefully but you haven't mentioned that we RM3S users can also apply this method...for overclock well I have to try it first...lol I think that thread is only for RM3 users... Sorry. Yeah V9 Antutu was score is damnn soo good.... Lesss goooo.....
NubiaNinja said:
Yes, I looked at the thread carefully but you haven't mentioned that we RM3S users can also apply this method...for overclock well I have to try it first...lol I think that thread is only for RM3 users... Sorry. Yeah V9 Antutu was score is damnn soo good.... Lesss goooo.....
Click to expand...
Click to collapse
Cause konabess process is unpacking binary on boot.img and re-compiling again, and boot.img it's same on all CN ROM that working on both devices RM3 and RM3s
I've installed everything succesfully. Only one thing thats bugging me that app notification doesn't show up on the lockscreen. I've tried disabling and enabling lockscreen notification but still not showing.
Faonee said:
I've installed everything succesfully. Only one thing thats bugging me that app notification doesn't show up on the lockscreen. I've tried disabling and enabling lockscreen notification but still not showing
Click to expand...
Click to collapse
ZTE have their own SDK for showing push notification info on their lock screen, and not all of apps support this lock screen info and integrate ZTE notification SDK.
So this problem depends on developer of apps, or ZTE must develop to allow all notification showing in locks screen and allow Google play services to show notification on lock Screen, * this is impossible yet cause of china vs us regulations for integrating gapps.
You can go on notification, Settings > Notification and status Bar > Notification Management > System, a lot of apps provided by CN ROM is supported by showing notif on lock screen. But in third party apps is not showing advanced feature to show notif on lock screen
*For reminder who's people is installing CN ROM, google services SDK feature like push notification (fcm) Or anything relate will not supported by apps in CN ROM it self. if you wanna working push notification and supported by system apps, you need to install from ZTE appcenter
never00miss said:
ZTE have their own SDK for showing push notification info on their lock screen, and not all of apps support this lock screen info and integrate ZTE notification SDK.
So this problem depends on developer of apps, or ZTE must develop to allow all notification showing in locks screen and allow Google play services to show notification on lock Screen, * this is impossible yet cause of china vs us regulations for integrating gapps.
You can go on notification, Settings > Notification and status Bar > Notification Management > System, a lot of apps provided by CN ROM is supported by showing notif on lock screen. But in third party apps is not showing advanced feature to show notif on lock screen
*For reminder who's people is installing CN ROM, google services SDK feature like push notification (fcm) Or anything relate will not supported by apps in CN ROM it self. if you wanna working push notification and supported by system apps, you need to install from ZTE appcenter
Click to expand...
Click to collapse
Thanks for the reply. Well that sucks. Need to get used to it somehow Haha.
Can you please write a guide to install android 11? I know it got bugs but I want to try it once atleast
souma_rox said:
Can you please write a guide to install android 11? I know it got bugs but I want to try it once atleast
Click to expand...
Click to collapse
Same as this tutorial "maybe", cause a lot of update on ZTE CN ROM flashable via TWRP.
You just need to change from v3.3x zip to v5.1x zip and flash on TWRP.
And what's said by @mauronofrio that TWRP only works again Chinese bootloader, so its "maybe" possible to flash CN ROM via twrp
Adb comand doesn't work for me.
Amuror3z said:
Adb comand doesn't work for me.
Click to expand...
Click to collapse
whut?? you need to make sure your adb installed well bruh.
Can we use the ok google hotword in the CN rom?
souma_rox said:
Can we use the ok google hotword in the CN rom?
Click to expand...
Click to collapse
You need to install full pack of nikgapps to get google assistant
I'm not sure what I'm doing wrong. I got Magisk to work and I have the rom up and running, but google play store doesn't seem to work. Which version exactly do I need to flash?
hidelater said:
I'm not sure what I'm doing wrong. I got Magisk to work and I have the rom up and running, but google play store doesn't seem to work. Which version exactly do I need to flash?
Click to expand...
Click to collapse
NIK GAPPS NikGapps-core-arm64-10-20210424-signed.zip
heya, nice guide.
just wanted to notify you that if you want to install the 3.34 cn rom / global rom from inside twrp, you might get a zip error.
to fix this, simply delete compatibility.zip from inside the NX629J-update.zip
under linux you can do this simply with "zip -d NX629J-update.zip compatibility.zip".
unpacking/repacking the zip is not advised
edit: seems this is only a thing if you try to flash from android 11 (v5.14) to android 10 (v3.34)
oh and the "adb reboot recovery" command (after flashing twrp) wont work since you are in fastboot mode during that step, "fastboot reboot recovery" might work