BLU Custom Recoverys - Android General

Updated 11/13/19
A Collection Of BLU Recoverys
Thanks to all the developers for there work and making them available
There are guides here on XDA from the developers of these recoverys for installing these Recovery's
(Thank them for there work , its not too much to ask)
Your device bootloader will need to be unlocked to install these Recoverys
THIS WILL VOID YOUR WARRANTY and ERASE YOUR DEVICE
BACKUP DATA PRIOR TO UNLOCKING BOOTLOADER
User takes all responsibility for using recoverys
Read and fully understand what is required prior to installing any recovery
It will be YOUR mistake if YOU use instructions that are not fully understood and may brick YOUR device
https://www.mediafire.com/folder/kl47eoi1dnr1p/BLU Recoverys
Advance 4.0L CWM - CTR
Advance 5.0 D030 TWRP
Advance 5.0 HD TWRP
Dash 3.5 D170i CWM
Dash 4.5 TWRP
Dash 5.0 TWRP
Dash X 2 TWRP
Dash X 010U TWRP
Energy X 2 Philz
Energy X LTE TWRP
Energy X Plus TWRP
Energy X TWRP
Energy XL 30UU CWM
Grand 5.5 HD TWRP
Grand Energy G130 TWRP
Grand M TWRP
Grand Max TWRP
Grand Mini TWRP
Life 8 TWRP
Life 8 XL TWRP
Life Max Carliv
Life Max TWRP
Life One 4G TWRP
Life One M Philz CWM
Life One X 2 Mini TWRP
Life One X TWRP
Life One X2 TWRP
Life One X3 TWRP
Life Pure CWM
Life XL TWRP L050U
Life Play 5 TWRP
Life Pure L240A TWRP
Life X 8 TWRP
M4 TWRP
R1 TWRP R0010UU - R0011UU (R0010UU Needs Bootloader Unlocked)
R1 Plus TWRP
Speed 4.7 CWM
Studio 5.0 C HD CWM
Studio 5.0 C Mini Carliv
Studio 5.0 II LTE D532 TWRP
Studio 5.0 LTE Y530U TWRP
Studio 5.5 D610 CWM
Studio 5.5 S CWM
Studio 6.0 HD TWRP
Studio 7.0 II TWRP
Studio C 5+5 TWRP
Studio C HD CWM
Studio C HD S090Q TWRP
Studio Energy 2 TWRP
Studio Energy 2 TWRP
Studio Energy Philz
Studio Energy TWRP
Studio G 2 TWRP
Studio G CTR
Studio G 790Q TWRP
Studio M HD CWM Philz
Studio One TWRP S0110EE
Studio One TWRP S0110UU
Studio Selfie 2 TWRP
Studio Selfie 2 TWRP 3.1.0 , 3.1.1
Studio Selfie TWRP
Studio Touch TWRP
Studio X Plus TWRP
Studio XL 2 CTR
Studio XL 2 TWRP
Tank Xtreme Pro T0010UU TWRP
Vivo 4.65 TWRP
Vivo 5 TWRP MM
Vivo 5R TWRP
Vivo 8 Gionee A1 TWRP
Vivo Air CWM
Vivo Air TWRP
Vivo One TWRP
Vivo XL Gionee S Plus CWM
Vivo XL TWRP
Vivo XL3 Plus TWRP

thanks but:
what twrp version is the blu studio 7.0 II?
does it actually work?

These are files for flash tool not twrp
The 7.0 2 S480L 769 downloads and the S480U 1480 downloads and they are full stock
TWRP can then be flashed for root , ect

Woops , TWRP , it has been downloaded and flashed with spflashtool 79 times with no complaints but it is your device if you decide to use it , backup all data as it will wipe device

donnasbrt1 said:
These are files for flash tool not twrp
The 7.0 2 S480L 769 downloads and the S480U 1480 downloads and they are full stock
TWRP can then be flashed for root , ect
Click to expand...
Click to collapse
thanks for that but there is not TWRP for the blu studio 7.0 II

https://www.mediafire.com/folder/tjf2f3f8mgzw8/Studio 7.0 II TWRP

https://www.mediafire.com/folder/kl47eoi1dnr1p/BLU Recoverys

donnasbrt1 said:
https://www.mediafire.com/folder/tjf2f3f8mgzw8/Studio 7.0 II TWRP
Click to expand...
Click to collapse
Thanks!!!!!
I think it will work but I don't wanna screw up things.
It took forever to find those files (since 2020)

Stock flash file here
https://www.mediafire.com/folder/y1h09d4dhjxb3/Studio 7.0 II S480U - S480L
You can test TWRP and if there is any issue simply flash stock recovery from stock file above to recover
Once you have TWRP you can either flash Super SU , or you can use system image in the above to patch Magisk SU and flash system to device , either way you get root

With Magisk you can also flash Xposed and customize alot

um, sorry if i really annoy but:
i have usb debugging enabled.
i connect it to the pc.
the moment when i do adb-devices it does not apear anything
in the blu, it does not appear anything, nothing about usb debugging or transfer.
does it need a special driver?
at this point i am just gonna make another post.

Are you on windows 10 by chance

yes, windows 10 on latest version
i have another computer with linux mint 20.3 xfce

Windows 10 does not play nice with BLU devices , odd but true , what I would do is download SP Flashtool and use the scatter file and recovery image and flash recovery thru flashtool then patch system image with Magisk and flash system image , flashtool will flash recovery and system without the need to use fastboot to flash

last stupid question
i googled "download sp flash tools" and there are more than 10 "official" sites for sp flashtool
where do i download it? (this is the first time that i install twrp on something)

Ha , there are no stupid questions
SP_Flash_Tool_v5.1436.00.000
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
This link is SP Flashtool
To flash device you need to power off device , hold power button and either volume up , or power button and volume down and then plug usb into device , it takes a few trys sometimes but you will see flash tool load and progress bar on bottom showing flash , then on first boot use volume up and power button to boot to TWRP , if you dont recovery will be over written and you will boot to stock recovery , first boot into TWRP , MAKE A BACKUP OF ENTIRE SYSTEM IN CASE YOU NEED TO RESTORE ,

The only files you need to load in flash tool are scatter and recovery image , do not select whole flash , do not select wipe and flash , select upgrade and only scatter and recovery img downloaded , make sure all other slots are not checked

Make a backup first boot into TWRP , MAKE A BACKUP, not having one will make it difficult to restore and a backup will retain IMEI if required

i didn't unlock bootloader. since i can't use adb, i can't unlock bootloader. (i think that my blu has the unlocked bootloader default (not found a oem unlocking option in developers settings)
i can take a virtual machine running windows xp/7/8.1 and run adb, but connecting it would be difficult
donnasbrt1 said:
Ha , there are no stupid questions
SP_Flash_Tool_v5.1436.00.000
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
This link is SP Flashtool
To flash device you need to power off device , hold power button and either volume up , or power button and volume down and then plug usb into device , it takes a few trys sometimes but you will see flash tool load and progress bar on bottom showing flash , then on first boot use volume up and power button to boot to TWRP , if you dont recovery will be over written and you will boot to stock recovery , first boot into TWRP , MAKE A BACKUP OF ENTIRE SYSTEM IN CASE YOU NEED TO RESTORE ,
Click to expand...
Click to collapse
when i use power+volume up it goes to android recovery
when i use power+ volume down it turns off and when it boot it boots into safe mode.
i saw a option called "fastboot mode" on the recovery menu, ¿and does it work?
it seems imposible to install twrp into my device.

Power off device , hold volume down and plug in usb , I would suggest leaving usb in phone and plug into pc , when flashtool sees device flash will start

Related

THL T100S Booting to Black screen

Hey Guys
So I got the newest THL T100 Kitkat rom on needroms did the factory reset / format now I boot to a black screen. I cant even get into the Chinese recovery menu.
Trying to use SP Flash Tools V5.1343.01 with the rom from Needroms and a scatter file I got on XDA but flash tools does not do anything when I click Download.
Im thinking this is down to the drivers the Phone keeps installing as a HTC Dream.
I did have 2 questions
do I not link SP Flash to the Rom I want installed ?
Were can I find a download of Windows 8 THL T100 drivers ? (I think this is the reason)
I have checked many guides but the version of SP they use is way different but I seen this version being recommended.
Please help miss my phone !!
Ok I got the phone booting so that SP Tools can download to it.
Now My question is how can I install a recovery (CWM & TWRP) using SP tool ?
I extracted the CWM software and used the image I.e in SP Tools I had everything deselected bar Recovery and I linked the locationg to the CWM IMG, It booted to CWM but couldnt load it and kept restarting

Batdroid v2 for E030U

This is a Custom ROM for E030U, The ROM includes stock V15 boot.img.
This rom is ported from [MT6582] Batdroid ROM for CherryMobile Flare S3 (H870)
http://harry-rom.blogspot.com/2016/01/batdroid-rom-for-cherrymobile-flare-s3.html
This is a very nice Rom, Batman themed rom, takes a bit to setup, the author make a video about set up rom.
https://youtu.be/NbjG1a4xqFA
few pics
[img=http://s8.postimg.org/44d9p2qe9/andscreen_06_000842.jpg]
[img=http://s15.postimg.org/6u2m7egl3/andscreen_06_000916.jpg]
[img=http://s15.postimg.org/5t2di9zlj/andscreen_06_001115.jpg]
[img=http://s21.postimg.org/gt495zrwj/andscreen_06_001209.jpg]
You need to do a factory reset before you install this rom
Note if you already unlocked your bootloader and have twrp installed, skip down to Installing ROM for those that already unlocked bootloader, and have twrp installed.
To install this ROM you need to unlock your bootloader
First download this ROM and twrp recovery
https://www.androidfilehost.com/?fid=24399994186369487
https://www.androidfilehost.com/?fid=24385226645962780
place BatDroid_v2.0_Rom_for_E030U.zip on your micro sdcard
For this method to work you need to have adb/fastboot setup and working, you will loose all data.
adb reboot bootloader
fastboot oem unlock
fastboot reboot
setup up phone again enable adb
adb reboot bootloader
fastboot flash recovery E030U_twrp6_recovery.img
fastboot reboot
adb reboot recovery
factory reset
back then install ROM
reboot system
Installing ROM for those that already unlocked bootloader, and have twrp installed.
If you have already unlocked your bootloader and have twrp recovery installed, you only have to flash BatDroid_v2.0_Rom_for_E030U.zip, reboot wait for phone to fully reboot.
reboot system
Took 7 minutes to boot, I have a lot of apps installed, your boot time will be different than mine, might be shorter or longer depending on amount of apps you have installed.
Credits
Ajith Narayanan H
Eisada Sangkant
Ais lava grand
MTK THAI ROM MODDER
Sono Solitario
xda-developers.com
BLU Smartphone Community Support Forum [US]
Link to BLU ENERGY X PLUS Aurora rom
http://forum.xda-developers.com/andr...urora-t3269248
Link to Color OS UI FOR BLU ENERGY X PLUS (BEXP)
http://forum.xda-developers.com/andr...-bexp-t3277961

Need twrp for LYF F1 (LS-5505)

Here are few names which have same cpu as LYF F1 i.e. Qualcomm Snapdragon 617 Processor:
Alcatel Idol 4,Sharp Aquos 507SH,Kyocera DuraForce Pro,Huawei G9 Lite,ZTE ZMax Pro,BlackBerry DTEK50,ZTE Axon Max,HTC One A9,ZTE Axon 7 Mini,Nubia Z11 Mini,Coolpad Max,Samsung Galaxy C5,Moto G4 Plus,Moto G4.
I have found the stock rom at the link "http://www.smartfirmwares.com/forum1/index.php?topic=189.0".
Can anyone help please?
Good news for all the users of LYF F1 who wants to have twrp and root access.
I found the stock rom at link "http://www.smartfirmwares.com/forum1/index.php?topic=189.0"
I extracted the stock rom and got the stock recovery,then I got the twrp recovery of ZTE Axon 7 Mini.
I ported the twrp by replacing only the zImage from the stock to the twrp,and kept the ramdisk the same in twrp.
It booted up well but I got a error that twrp could not mount any partition except the recovery.
I then got the twrp of Moto G4 Plus,but the twrp did not have the ramdisk,it only contains zImage,so I could not port it.
I then got the twrp of Samsung Galaxy C5 and ported it in the same way,but it put the phone into recovery bootloop,phone was booting into twrp,then switching off,then again booting to twrp,at one moment when phone was switched off for one second,I flashed again the previous working recovery.
I then ported the twrp recovery of ZTE Axon Max but it gave the same error that it could not mount any partition except the recovery.
Then I ported the twrp recovery of ZTE Nubia Z11 Mini and this one was successfull without any error,but the recovery was in chinese.I can not remember the whole thing but the first window appeared in front,I touched the lower right conrer and changed the language to english,since then everything is in english.The link of that recovery is "https://drive.google.com/open?id=0B2iZIwRNj3bpaEl3dWR1eXRsalk" and password is "Created-by-Tarasantan"
Now How did I flashed the twrp,I downloaded and extracted the stock rom,then I found a "_qcMUP.zip" within the zip "LYF F1 LS-5505 TOOL & DRIVERS.zip",then extracted the zip _qcMUP.zip,there in the support folder I found some windows softwares,I ran all of them to install the drivers and neccessary files.
Then in the "LYF F1 LS-5505 PC SW VER 01_06 By Gsm_F!rmwares_Tm" folder I replaced the stock "recovery.img" with the twrp "recovery.img".And then I ran the "qcMUP.exe" in the _qcMUP folder which I previously extracted.
Now I clicked the do button in the upper right corner of "qcMUP.exe",then clicked upgrade,then I selected the "LYF F1 LS-5505 PC SW VER 01_06 By Gsm_F!rmwares_Tm" folder.
Now I switched off the phone,then I pressed and hold volume up and down at the same time,and pluged the phone into the computer and the flashing started on qcMUP.exe window with a light blue bar filling up with a deep blue colour as the flashing was going on.
This will clear all the apps and data you previously have had in your internal memory.So you can back up all the installed app with es filexplorer,or super backup,and all the contacts and smses with super backup,then you must move all the backed up things and other neccessary things to the sd card.At the end put the latest supersu.zip in your sd card.
The next part is very important,when flashing is passed,you will unplug the phone from the computer,then press and hold the power and the volume up at the same time.You will be booted up into twrp then somehow change the language to english from chinese,then flash the supersu.zip from your sd card,if you do not boot into twrp and flash the supersu.zip then whenever you will boot into the system,the twrp recovery will be replaced with the stock recovery,when you flash the supersu.zip,it patches the boot.img so that it does not replace the twrp recovery with the stock.
Alternatively
you can use the following method.I have not tested this method,but this should work.In this method you just need to download this file "TWRP For LYF F1.7z",from https://drive.google.com/open?id=0B2iZIwRNj3bpanRsaUM0OEdYV3c ,password is Created-By-Tarasantan .This recovery is made for exactly LS-5505,that means ro.product.device is LS-5505 ,ro.product.locale is en-IN and other properties are also changed for LS-5505.
Download and Extract the "TWRP For LYF F1.7z" file,then install the given drivers,then run the "qcMUP.exe".
Now Click the do button in the upper right corner of "qcMUP.exe" window,then click upgrade,then select the "LYF F1 LS-5505 TWRP 3.0.2" folder.
Now switch off the phone,then press and hold volume up and down at the same time,and plug the phone into the computer and the flashing should start on qcMUP.exe window with a light blue bar filling up with a deep blue colour as the flashing is going on.
This will not clear any apps and data that you previously have had in your internal memory.So you do not need to back up anything.But you need to put a supersu.zip in your sd card.
The next part is very important,when flashing is passed,unplug the phone from the computer,then press and hold the power and the volume up at the same time.Your phone should be booted up into twrp,then flash the supersu.zip from your sd card,if you do not boot your phone into twrp and flash the supersu.zip then whenever you will boot into the system,the twrp recovery will be replaced with the stock recovery,when you flash the supersu.zip,it patches the boot.img so that the boot.img does not replace the twrp recovery with the stock one.
Link of a image of the window which will come when you first time boot into twrp
https://drive.google.com/open?id=0B2iZIwRNj3bpbTgySjdfRFZKUzg
Hey i am also have lyf f1 5505 ia want to root plz give me all the recommended links and processs
Plz help the lyf user
hi bro need help
twrp is password protected plz provide password
---------- Post added at 05:28 AM ---------- Previous post was at 05:05 AM ----------
thankyou ls5505 root done .............................................................................
Plz give me password.
plz sir give me password
AyanRangrez said:
plz sir give me password
Click to expand...
Click to collapse
Please Read the full post, password is Created-By-Tarasantan
Sir please give me Lyf f1 twrp password please in am very tensed
Vishul saxena said:
Sir please give me Lyf f1 twrp password please in am very tensed
Click to expand...
Click to collapse
R u being serious read the first post well dear! Or have a glass of water before that then re-read it again! I have mentioned so many times go through the pages! We are here to help you people not serve you! Read the whole topic.
Hii.. I need some help.
I need some help regarding the flashing method....what i mean is ... that is it possible to unlock its bootloader by those fastboot , etc. commands and then flashing twrp recovery ???
Hello sir thank for the that wonderful information but i want help, i root my phone with help of your process full flash phone with twrp file but now my volte features is gone after flashing i try and remove recovery and flash with original stock rom then reboot normally but still my volte feature not enable i try with *#*#4636#*#* and check setting but there nothing happen i download universel volte patch file download from xda forum patch 1 and patch 2 and install through recovery after reinstall recovery but problem still same before install twrp my airtel sim was work on volte calling+4g but now lte only work no calling i was hide every thing with magiks manager but nothing was solve can u pls help me what should do thanks
Needsupport said:
I need some help regarding the flashing method....what i mean is ... that is it possible to unlock its bootloader by those fastboot , etc. commands and then flashing twrp recovery ???
Click to expand...
Click to collapse
Yes u can but why u want to unlock when u install twrp recovery everything is in ur control after install magiks manger so many root app will solve many problem
Guys, kindly provide me a latest firmware for ls5505.

Rooting the blu vivo 5 mini using twrp guide

Recently I was ask to root the blu vivo 5 mini, after hours of research i found nothing some deem it unrootable. i took on myself to port a recovery image to my surprise i did it and root the device. here is my guide to root the device or flash the twrp. i have plans to port roms for it but depends on the feedback i get to see if people want it.
ROOTING THE BLU VIVO 5 MINI
TOOLS
Code:
twrp recovery
scatter file
superSU zip
sp flash tool
here is the tools
oh **** i am a junior member i cant post links you have copy and paste the link sorry not my fault
COPY and PASTE
twrp
mega.nz/#!2MITTIoA!JmihaXIyc3BJOMFkcyHRgqMBPLy-RVi_HGB-_2agwN8
scatterfile
mega.nz/#!DZBxhaSL!UJkXksmf8Bn9bPS4G-dYO4TX5BhIdzuPEciE7XiFW7o
supersu
idroidspace.com/download-supersu-for-marshmallow-android-6-0-zip-apk/
sp
spflashtool.com/
step .1
open sp flash to and import the scatter file
step .2
locate the recovery section
step .3
locate the twrp.img file and import it to sp flash tool
step .4
set flash to download, then flash the twrp.img
you have successfully flash twrp to device.
rooting the device is relatively easy at this point
step. 5
add supersu zip to sd card or leave it on the device, boot your device in recovery mode
by holding on volume up and power button at the same time. select install add locate supersu.zip
and flash it on the device finish the device is rooted reboot to system
My name is Andrew Anderson i want to port some rom for the phone but i need to know if you guys want it before i do it .
if this thread has help please consider donating it help me drink a coffee every morning bye
I go to try on my phone
I'll not sure of this method because i already root with magisk, but i go to try for obtain TWRP with this
This should be better if we try with Magisk, i have installed this twrp and magisk in my Blu Vivo 5 Mini
I definitely try this for my phone with twrp and magisk.
Twrp V051 ...????
Root blu vivo mini 5 V051,???
porrasomar07 said:
Root blu vivo mini 5 V051,???
Click to expand...
Click to collapse
yes, this work for all model of blu vivo mini

Twrp not booting nokia 6 ta-1021

Hello,
Can someone help me....,
I flashed twrp image to my nokia 6 ta -1021. When try to boot twrp from fastboot.., twrp not booting up.
Even tried by combo keys(vol up + power). It only gets into recovery mode. But im not able to boot into twrp recovery...,
Im trying to install custom rom on my device using twrp..., is there any other method.so, that i can flash custom rom without using twrp.
Also suggest me any good custom rom for nokia 6 ta-1021??
Thanks & regards,
Madhu

Categories

Resources