I can turn it on successfully without sim card. But it fails when I put sim card in it, which means I can't make calls. Anyone knows how to fix it!
nick_martin said:
I can turn it on successfully without sim card. But it fails when I put sim card in it, which means I can't make calls. Anyone knows how to fix it!
Click to expand...
Click to collapse
Have a look on Wizard section or in the Wiki
Also a hard reset can help
Good luck,
orb3000 said:
Have a look on Wizard section or in the Wiki
Also a hard reset can help
Good luck,
Click to expand...
Click to collapse
I don't think hard reset will help. I have tried several differal roms. None of it worked.
So after doing something dumb with CWM, fixing it and being back on on ED1. I am getting an error message saying Sim Card unreadable or not supported.
and ideas why?
Negative! But I am all ears...I forgot not to recover LOL. I'm in the same boat, I'm going to try n get a new sim card tomorrow
Mikey450GT said:
Negative! But I am all ears...I forgot not to recover LOL. I'm in the same boat, I'm going to try n get a new sim card tomorrow
Click to expand...
Click to collapse
hmmm
so you used the recover too? Then fixed the brick and now no Sim Card reading?
My Sim Card wouldn't read a new one VZW tried to put in there, so its being replaced, this might be an unexpected consequence.
which package did you use to fix your phone after trying the recover tool?
ShotgunSam said:
hmmm
so you used the recover too? Then fixed the brick and now no Sim Card reading?
My Sim Card wouldn't read a new one VZW tried to put in there, so its being replaced, this might be an unexpected consequence.
which package did you use to fix your phone after trying the recover tool?
Click to expand...
Click to collapse
Haha yea, I was so used to doing it on my Evo that it was second nature to me. I work at my local Bestbuy, so I'm sure it won't be an issue. Plus even if they found out I did root it, to them it functions perfectly I used the almost full one. But ironically it only worked for me when I didn't click on the re-partition. I went against the grain and it worked somehow!
Same thing I did, (did re-partition however), The almost one was the only one that worked for me. Then I had to flash ED1 rooted and it came up with the sim card reading error.
Interesting.
ShotgunSam said:
Same thing I did, (did re-partition however), The almost one was the only one that worked for me. Then I had to flash ED1 rooted and it came up with the sim card reading error.
Interesting.
Click to expand...
Click to collapse
You said that after getting a new sim card it didn't work still? Did you end up rooting your new phone? We must remember not to recover!!
That is correct, a new sim card will not work, it seems to be the reader.
ShotgunSam said:
That is correct, a new sim card will not work, it seems to be the reader.
Click to expand...
Click to collapse
I will get a new one tomorrow on that note. Thanks, hopefully we can minimize this from happening.
ShotgunSam said:
Same thing I did, (did re-partition however), The almost one was the only one that worked for me. Then I had to flash ED1 rooted and it came up with the sim card reading error.
Interesting.
Click to expand...
Click to collapse
Yea it was pretty crazy
OH BTW! Lookie what I found?!
SIM Card - Inserting / Removing - Motorola DROID Pro (XT610)
Do not attempt to insert or remove the SIM card with the battery still installed in the device. Doing so can harm the SIM card and / or the device.
Gentlemen! You may want to check with DroidXcon on this topic.
He had the exact same problem a couple of days ago while building one of the first ROMs for the EE4 release.
There is a software solution for the "dead SIM" issue. I just don't remember who DroidXcon contacted to fix the problem, but it did get fixed by another dev.
P.S.: When you find out the solution, it would be nice to post it here.
Cheers!
¿GotJazz? said:
Gentlemen! You may want to check with DroidXcon on this topic.
He had the exact same problem a couple of days ago while building one of the first ROMs for the EE4 release.
There is a software solution for the "dead SIM" issue. I just don't remember who DroidXcon contacted to fix the problem, but it did get fixed by another dev.
P.S.: When you find out the solution, it would be nice to post it here.
Cheers!
Click to expand...
Click to collapse
according to him, he had no such problem with the sim reader.
¿GotJazz? said:
Gentlemen! You may want to check with DroidXcon on this topic.
He had the exact same problem a couple of days ago while building one of the first ROMs for the EE4 release.
There is a software solution for the "dead SIM" issue. I just don't remember who DroidXcon contacted to fix the problem, but it did get fixed by another dev.
P.S.: When you find out the solution, it would be nice to post it here.
Cheers!
Click to expand...
Click to collapse
I think you are talking about the read only sdcard issue with rooted kernels on EE4... I was the dev who showed him how to fix i.. But either-way its completely unrelated
Sorry - I was sure I saw DroidXCon saying that he had a problem with his SIM card not being recognized (and the SD card problem, too) a few days ago while he was on the IRC, and we were confused how loading a new ROM would affect SIM card reading.
I'm sorry for any misinformation I provided.
My bad.
glad to know i'm not the only one in exactly the same situation
Unknown Baseband Version
Im no expert but i think the sim card is not being read because the phone has a unknown baseband version. Now if only we could find a way to restore that.
I've tried flashing stock ED1 ED2 EE4 and nothing
After flashing all those, everytime i checked settings>about phone>Baseband version says unkown
It would be awesome if a developer could look into this and find a fix for it if thats what the problem is.
Jessberto said:
Im no expert but i think the sim card is not being read because the phone has a unknown baseband version. Now if only we could find a way to restore that.
I've tried flashing stock ED1 ED2 EE4 and nothing
After flashing all those, everytime i checked settings>about phone>Baseband version says unkown
It would be awesome if a developer could look into this and find a fix for it if thats what the problem is.
Click to expand...
Click to collapse
how are you even able to get into the settings, I cant do anything on my phone but stare at the English or Spanish prompt
ShotgunSam said:
how are you even able to get into the settings, I cant do anything on my phone but stare at the English or Spanish prompt
Click to expand...
Click to collapse
LOL i went to settings super quick before it prompted me to activate the phone.
Jessberto said:
LOL i went to settings super quick before it prompted me to activate the phone.
Click to expand...
Click to collapse
hm. I haven't been able to get there fast enough.
I seem to be in the same boat. Unknown baseband version shows:
i510.06V.EE4
Unkown
Can't connect to network as the sim card can not be read. Hoping there is a software fix.
I was moving apps to the MicroSD when the phone froze. Eventually it recovered and the operation was "finished". A moment later it appeared as though I had no card inserted. I mounted the card again and it needed to be reformatted. I reformatted. Later in the day it appeared as though I had no card inserted and the cycle repeated.
I need to add that I am rooted using Chainfire. I did not notice this issue until after I rooted though that could be coincidence. Has anybody else experienced issues with the microSD? I have a Samsung 64GB XC Class 10 from Amazon.
blazingfate said:
I was moving apps to the MicroSD when the phone froze. Eventually it recovered and the operation was "finished". A moment later it appeared as though I had no card inserted. I mounted the card again and it needed to be reformatted. I reformatted. Later in the day it appeared as though I had no card inserted and the cycle repeated.
I need to add that I am rooted using Chainfire. I did not notice this issue until after I rooted though that could be coincidence. Has anybody else experienced issues with the microSD? I have a Samsung 64GB XC Class 10 from Amazon.
Click to expand...
Click to collapse
the fix you need is here
http://forum.xda-developers.com/showthread.php?t=2715657
evilbeef54 said:
the fix you need is here
http://forum.xda-developers.com/showthread.php?t=2715657
Click to expand...
Click to collapse
Thank you. I've installed the app. Hopefully this fixes my problem and it's not a bigger issue.
no SIM
Just got my GS5 and it wont recognize the external SD card? any help please?
Devtodi said:
Just got my GS5 and it wont recognize the external SD card? any help please?
Click to expand...
Click to collapse
read the link i posted above
evilbeef54 said:
read the link i posted above
Click to expand...
Click to collapse
Sorry, I am not rooted and my phone doesn't recognize that an sd card is installed
Devtodi said:
Sorry, I am not rooted and my phone doesn't recognize that an sd card is installed
Click to expand...
Click to collapse
ah so it doesnt reconize it at all? has the sd card worked in other devices? it isnt an ebay one is it, i have recieved bad ones before
evilbeef54 said:
ah so it doesnt reconize it at all? has the sd card worked in other devices? it isnt an ebay one is it, i have recieved bad ones before
Click to expand...
Click to collapse
the card came straight out of my GS3 and GS5 wont recognize it at all
Devtodi said:
the card came straight out of my GS3 and GS5 wont recognize it at all
Click to expand...
Click to collapse
Did you try reformatting it?
Sent from Tapatalk
Yes
Sent from my SM-G900P using xda app-developers app
Hello, i have a moto g LTE Xt1040 that was working normally with CM 12.1, and then suddenly, the sim card stopped working, it only works when it wants, when i put the sim it tries to search network but fails and onlly show "emergency calls only".
i already tried reflashing latest cm, and erasing cache/dalvik/modemst1-2 but no success after all, only for 2 or 3 minutes the sim card have worked, help me pls lol
Hi,
Trying to flash cm12.1 radio for XT1040,maybe?
http://forum.xda-developers.com/showthread.php?t=3142816
(take a look in first post's spoiler)
satanas17 said:
Hi,
Trying to flash cm12.1 radio for XT1040,maybe?
http://forum.xda-developers.com/showthread.php?t=3142816
(take a look in first post's spoiler)
Click to expand...
Click to collapse
i forgot to do this, i will try it later:good:
igorinolw said:
i forgot to do this, i will try it later:good:
Click to expand...
Click to collapse
Let me know if it was helpful
satanas17 said:
Let me know if it was helpful
Click to expand...
Click to collapse
dont know why, but didn't worked
the phone recognizes the SIM, but doesn't give signal
i think the IMEI got blocked by the older user, is there any way to check it?
made a test with another SIm card, only the internet works, including 4G
Bump!!
https://drive.google.com/file/d/1t-G-TrEr3rYWnutSBDRIBy5RomaXapzP/view
just do fastboot boot patched_boot.img and you got it working!
some great dude gave this link to me... I tested it and its working.. thanks again!
I AM NOT RESPONSIBLE FOR BRICKED DEVICES OR DEAD SD CARD OR YELLING MAMA'S
Works!
Thanks!
you dont lose your data if you do this, right?
After applied this my network never worked again I tried the both sim trays but they didnt even understand that I put a sim card on it or not. I think I should flash firmware one more time
limestromb said:
After applied this my network never worked again I tried the both sim trays but they didnt even understand that I put a sim card on it or not. I think I should flash firmware one more time
Click to expand...
Click to collapse
try this https://drive.google.com/open?id=1f9-KAlONtk2MnpMh1Mt4wbgV2uJDGeon
im using it now, make sure you are on v1.0.0.4.0 before you fastboot.