Database Info

Magisk v9 with 6045

Hi to all
I am trying to install magisk v9 in stock ROM without any success. Always after the installation phone boot to bootloader.
The Bootloader is unlock and when I un-install the magisk v9 the phone working properly.
Any idea how we could install magisk v9

Try factory reset or another version. I had installed Magisk v7, and few days ago updated to v9.

Great finding!!!
In Stock 6045 it is possible to install magisk-v7 or Magisk-v8.

In stock 6045 (5.0.2-010 02) it isn't possible to install Magisk-v9 via Manager or temp TWRP.
In case of temp TWRP device is stack to bootloader. It is possible to uninstall Magisk to work properly or install Magisk-v8
Any idea how to overcome the issue

totalcmdext said:
In stock 6045 (5.0.2-010 02) it isn't possible to install Magisk-v9 via Manager or temp TWRP.
In case of temp TWRP device is stack to bootloader. It is possible to uninstall Magisk to work properly or install Magisk-v8
Any idea how to overcome the issue
Click to expand...
Click to collapse
root your device, install permamently TWRP and no problem then

Stuck on Android splash image during boot, after downloading and installing Magisk Manager and Apk 12.0. I was rooted through KingRoot, SuperSu installed busybox as well. I uninstalled SuperSu (through in app options) getting ready for MagiskSU.
Heres the deal. Even though I have twrp working, I cant use it cuz of a broke screen. Im thinking a factory reset via hardware buttons is my best option. But how?
6045O running the Panasonic Eluga Switch. Rooted, twrp satana 3.0.0.1 installed

Best Kernel to use with Magisk on rooted stock rom

I'm trying use android pay on my rooted sm-n920t 6.0.1. I've successfully installed Magisk and phh SU. The feature within Magisk that hides root from safetynet isn't compatible with stock Samsung kernel. So what are some recommendations on which kernel would be best suited for a stock rom rooted with Magisk?
Sent from my SM-N920T 6.0.1 using Tapatalk

biggdevon said:
I'm trying use android pay on my rooted sm-n920t 6.0.1. I've successfully installed Magisk and phh SU. The feature within Magisk that hides root from safetynet isn't compatible with stock Samsung kernel. So what are some recommendations on which kernel would be best suited for a stock rom rooted with Magisk?
Sent from my SM-N920T 6.0.1 using Tapatalk
Click to expand...
Click to collapse
Hi, could you tell me how did you installed magisk on your n920t? which version of magisk did you use ? I'm trying to install magisk on my sm-n9200 6.0.1 with stock rom unrooted , but failed . I installed magisk manager and flashed Magisk-v11.1.zip on my n9200 with stock 6.0.1 rom ( unmodified) , but when I opened magisk manager , it said " magisk is not installed ", while the root function showed and worked correctly . I followed the instructions in magisk manager to download and install magisk . After installation, magisk manager said that magisk was installed , but after I rebooted my note5, it showed " magisk is not installed " again.

woyaojizhu8 said:
Hi, could you tell me how did you installed magisk on your n920t? which version of magisk did you use ? I'm trying to install magisk on my sm-n9200 6.0.1 with stock rom unrooted , but failed . I installed magisk manager and flashed Magisk-v11.1.zip on my n9200 with stock 6.0.1 rom ( unmodified) , but when I opened magisk manager , it said " magisk is not installed ", while the root function showed and worked correctly . I followed the instructions in magisk manager to download and install magisk . After installation, magisk manager said that magisk was installed , but after I rebooted my note5, it showed " magisk is not installed " again.
Click to expand...
Click to collapse
You said you're not rooted, how are you flashing the files? Custom recovery, Flashify, FlashFire?
I started from compete stock, fresh.
Flashed TWRP via Odin, booted to recovery
Flashed arter97's v22 kernel via TWRP, booted system
Waited for system to settle (10 min), rebooted to recovery
Flashed osm0sis unSU.zip (Google is your friend), stay in recovery
Wipe dalvik and cache, flash Magisk-v11.1.zip
Boot system.
Forgot to mention the post you quoted was from when I used v10.2. Now using v11.1 so there's no need to install anything from phh. And you'll need the Magisk Manager app from the Play store

biggdevon said:
You said you're not rooted, how are you flashing the files? Custom recovery, Flashify, FlashFire?
I started from compete stock, fresh.
Flashed TWRP via Odin, booted to recovery
Flashed arter97's v22 kernel via TWRP, booted system
Waited for system to settle (10 min), rebooted to recovery
Flashed osm0sis unSU.zip (Google is your friend), stay in recovery
Wipe dalvik and cache, flash Magisk-v11.1.zip
Boot system.
Forgot to mention the post you quoted was from when I used v10.2. Now using v11.1 so there's no need to install anything from phh. And you'll need the Magisk Manager app from the Play store
Click to expand...
Click to collapse
I started from compete stock, fresh too. I flashed twrp, installed magisk manager app , and then flashed Magisk-v11.1.zip using twrp.

woyaojizhu8 said:
I started from compete stock, fresh too. I flashed twrp, installed magisk manager app , and then flashed Magisk-v11.1.zip using twrp.
Click to expand...
Click to collapse
Not sure then. I know the stock Samsung kernel doesn't play well with Magisk so maybe try a custom kernel. Otherwise try reaching out and posting your logs on the main Magisk troubleshooting thread: https://forum.xda-developers.com/apps/magisk/mod-magisk-v1-universal-systemless-t3432382

Magisk on Note Edge

Hi Folks
I searched for rooting the new Galaxy S8 (I might get one) and came across an app called Magisk
to root the device and it sounds pretty good.
My question is, would this work on the Note Edge, (in my case the G variant)with 6.0.1 stock rom...

hingerl said:
Hi Folks
I searched for rooting the new Galaxy S8 (I might get one) and came across an app called Magisk
to root the device and it sounds pretty good.
My question is, would this work on the Note Edge, (in my case the G variant)with 6.0.1 stock rom...
Click to expand...
Click to collapse
Yes, it will work on all Android phones. Nowadays, Magisk became a famous root because it has cool features. The best feature of it is that you can hide root for specific games or programs like banking app wich can't open while the phone is rooted. I will write quick and simple below for how to flash Magisk.
1. If your phone is rooted flash unSU.zip
2. Flash Magisk v12.0
3. Wipe Dalvik/cache
4. Reboot and wait to update the programs about 10-15mins
5. When the phone is booted install the MagiskManager v4.3.3. which is not available in PlayStore anymore
6. Open Magisk and go to settings
7. Enable BusyBox and Magisk Hide (This will pass the SafetyNet security)
8. Go back tap to check SafetyNet (It will be green coloured) and you're done
Now u have Magisk with a rooted phone and a lot of features inside

Sweet...Thanks a million... I think I start from scratch anyway with flashing a stock rom...
so, just to be safe, I flash stock (let it boot and make the initial setup)
then flash recovery, and there I flash the Magisk file and at last install the
Magisk app and thats it... or is there something else, I've seen ont the S8 tutorial
that there is another file to be flashed in recovery... but I assume this has something to do with security features from Android 7/Samsung...

So, i have a Note Edge SN 915G stock ROM 6.0.1
Tried to flash in ODIN custom recovery TWRP so I can flash Magisk from recovery. It didn't work, because the reboot restores the stock recovery back.
Tried again by not rebooting and removing the battery after flashing in ODIN the TWRP. The custom recovery remained flashed, this time, but it didn't open: recovery is not seandroid enforcing error.
Flashed CWM second time with ODIN, removed battery, boot into recovery (CWM worked and opened successfully).
Flashed Magisk zip from the custom recovery, but after reboot ended into boot loop, soft brick with error Set Warranty Bit: kernel.
Reflashed stock firmware with ODIN, back to normal.
Any adivce on how to flash that darn Magisk properly?
Thank you.
PS: I did not wipe davlik after flashing Magisk, though. Could this be it?

ufukan said:
Yes, it will work on all Android phones. Nowadays, Magisk became a famous root because it has cool features. The best feature of it is that you can hide root for specific games or programs like banking app wich can't open while the phone is rooted. I will write quick and simple below for how to flash Magisk.
1. If your phone is rooted flash unSU.zip
2. Flash Magisk v12.0
3. Wipe Dalvik/cache
4. Reboot and wait to update the programs about 10-15mins
5. When the phone is booted install the MagiskManager v4.3.3. which is not available in PlayStore anymore
6. Open Magisk and go to settings
7. Enable BusyBox and Magisk Hide (This will pass the SafetyNet security)
8. Go back tap to check SafetyNet (It will be green coloured) and you're done
Now u have Magisk with a rooted phone and a lot of features inside
Click to expand...
Click to collapse
Thanks a lot for the tips I have a question: After installing Magisk, I want to get Xposed installed, but it bootloops me at the Samsung logo every time, with the zip sdk23 of xposed by the official thread of rovo89 (thanks for his great work), and also with the xposed 23 at Magisk Manager. Did you get it systemless Xposed to work with Magisk in our Note Edge?

telefon notum kenar n915f magisk'in en son sürümünü indirmek istiyorum ancak indirmek istediğim sürümü indiremiyorum v 22.0

I want to download the latest version of magisk but I cannot download the version I want to download is v 22.0

Magisk hell resolved??!!!!!!!??!!!!!!!!!!?? fix/work around

im new at thisxda stuff but i am 90 percent sure i figured out how to keep magisk from uninstalling after a reboot... YOU MAY NEED TO UNINSTALL MAGISK AND ALL MODULES BEFORE DOING THIS USING MAGISK UNINSTALLER basically you have to also install an older version of supersu and it has to be an aroma installer and install as SYSTEM also make a backup of the boot.img just incase you get bricked if you install the supersu app it will say su binary occupied but install should stay install supersu aroma (2.78v2) from https://forum.xda-developers.com/attachment.php?attachmentid=3879523&d=1474248173 before and possibly after magisk install...only tested with magisk 16.2 beta channel and regular install not patched boot on Axon 7 with RR 8.1 weekly 6.0.0 20180225 (us variant) but should work on others probably...let me know how this goes for you
TRY AT OWN RISK I AM NOT RESPONSIBLE FOR DEVICE BOOTLOOPS OR BRICKS
If anyone has a better way to get magisk to hold after a few restarts please let me know
sidenote:this supersu does work with magisk not installed and definately keeps root
(stock boot.img is in initial zip for custom rom) select intall imgs in twrp and flash the boot partition as needed)
ALSO YOU CAN ALWAYS DIRTY FLASH CUSTOM ROM same build or higher IF ALL GOES TO **** AND WONT LOOSE APPS OR DATA AT LEAST ON RR

Unable to Install/Flash Magisk Modules

Hey all,
I am rooted with Magisk 17.3 on global hardware and global ROM stock MIUI 10.2.2.0, but I cannot install any Magisk modules or flash Magisk ZIPs in TWRP. I know root works because I've edited system files and allowed a few apps root permissions. But when I try to install something with Magisk Manager (6.1.0 since 7.0.0 doesn't work < v18) I get this error: /data/adb/magisk_merge.img mount failed... abort or it tells me Magisk 17.x+ isn't installed. (I've tried the Magisk Mod Uninstaller, Youtube Vanced, and LKT). When I try to flash a Magisk ZIP in TWRP it gives me Error: 1
I did some searching and some people were getting this due to their filesystem being formatted as f2fs in the past, but I verified that the Mi Mix 3 uses EXT4 using DiskInfo.
Did I miss something during the rooting process? I unlocked the bootloader, flashed TWRP in fastboot, flashed Magisk 17.3 in TWRP, and verified root was achieved with Rootchecker. The Magisk Manager app also says it's installed and passes SafetyNet. Anyone have any ideas?

Do you use a custom kernel?
Try the latest Magisk canary build and see if that works

JetzNicht said:
Do you use a custom kernel?
Try the latest Magisk canary build and see if that works
Click to expand...
Click to collapse
No it is the stock kernel that came with the MIUI 10.2.2.0 global build. Should I be using one?
Quick update: I am able to install some modules now by downloading them in Magisk, then booting to TWRP and flashing the ZIP there. I was able to get Magisk Mod Uninstaller (mm) and LKT to run for example using this method. YouTube Vanced still gives me the Error: 1 when I do this however.

The try a custom kernel, had the same problems with any modifications to the system with stock kernel.
As far as I know there are only two kernels atm, friendly fire and androplus.