LK screen protector + Spigen Rugged Armor case + random other things - Google Pixel 4 XL Accessories

If you're like me, as soon as you pre-ordered your Pixel you also bought a case/screen protector/etc. Here are some random pictures.
First the screen protector, I purchased the LK 3 pack screen protector from Amazon. I picked the LK brand because it had a lot of good reviews for the Pixel 3 XL. I installed it using the alignment tool and unfortunately it doesn't cover the whole screen, see the pictures below (excuse the dust).
https://imgur.com/a/rzI3lov
I know it's not much but when you're looking at things on the edges, it's pretty noticeable.
The case I'm using is the Spigen Rugged Armor. This is my go to case because it's a simple design that provides protection for cheap. I used it with my Nexus 6P, Pixel 1, 2 and now 4. It fits nicely, the cut outs are lined up perfectly. The rear camera could be protected a little better though. See pictures below (I know.. dust).
https://imgur.com/a/8JW4KXl

vanydotk said:
If you're like me, as soon as you pre-ordered your Pixel you also bought a case/screen protector/etc. Here are some random pictures.
First the screen protector, I purchased the LK 3 pack screen protector from Amazon. I picked the LK brand because it had a lot of good reviews for the Pixel 3 XL. I installed it using the alignment tool and unfortunately it doesn't cover the whole screen, see the pictures below (excuse the dust).
https://imgur.com/a/rzI3lov
I know it's not much but when you're looking at things on the edges, it's pretty noticeable.
The case I'm using is the Spigen Rugged Armor. This is my go to case because it's a simple design that provides protection for cheap. I used it with my Nexus 6P, Pixel 1, 2 and now 4. It fits nicely, the cut outs are lined up perfectly. The rear camera could be protected a little better though. See pictures below (I know.. dust).
https://imgur.com/a/8JW4KXl
Click to expand...
Click to collapse
the screen is slightly curved no? thats probably why

Related

[Review] ZeroLemon 9H Ultra Glass Armor tempered glass screen protector

** @ZEROLEMON_OFFICIAL has asked me to make this thread to review their new glass screen protectors. Please don't start your own thread and leave all feedback on this thread. Thank you.**
Hi guys well this is my review of the ZeroLemon 9H Ultra Glass Armor tempered glass screen protector. I liked the packaging. Straight forward, easy to open. It came with the screen protector, cleaning cloth and alcohol wipe.
Installation
I wasn't too fond of the wipe. It left a lot of streak and marks on the screen. It might have been user error but eventually i got the screen cleaned. My method is i grabbed two pieces of packaging tape. I put one pieces of the tape on one side of the screen and the other one the other side of the screen, overlapping the first piece of tape. I then pressed down on the pieces of tape really well to try to get every spot of the screen. I then pulled the tape off and it got about 99% of the dust off the screen. I then pulled the plastic off of the screen protector and applied it.
My Thoughts
I really like it. Its smooth. The screen is still clear and responsive. Its thin and it fits all of the cases i have. I'm not a huge user of the finger print scanner but for the review, I've been using it and it seems to work very well. Following are images of the packaging and cases I've tried this screen protector with. I've used the following cases:
- clear TPU case
- Otterbox Commuter
- Otterbox Defender
- Spigen Neo Hybrid
- Verus Thor
- Verus Iron Shield
Overall I'm very happy with this screen protector and for under $10, it may be the best screen protector for the value available for the Galaxy S5
Less fancy review.
I also received this item from ZeroLemon for review...
My tempered glass package came in on the weekend but was unable to get it in my hands until Monday. The box was rather plain but contents were neatly organized, protected, and all accounted for. This glass is thicker than some others I've used and I have no clue if that's a good or bad thing, but despite the thickness it does not interfere with any of my 4 cases (diztronic slim tpu, ultra tpu, reactor, and ringke slim armor case). I did not use the included alcohol wipe as the screen was already spotless dustwise on delivery. Installation was just like any other tempered glass screen I've ever had and I had zero issues applying it with zero bubbles or dust stuck between the screen and glass. I noticed no decrease in screen response just as I did not with any brand I've used. I did like how they printed the instructions on the inside of the carton itself rather than an added piece of paper. No issues with the finger print scanner and the front camera still takes clear shots.
Minor nit picks would be to make the packaging a little more visually pleasing, and I would prefer not to see iphone pictures used in the instructions, I rather see the device it's being sold for.
Bottom line I think this is a great value at it's current price and will remain so as long as it is below the 10 dollar mark. once it is above that there's no reason to pick this product over any other of the many others in that price range.
Sorry for the lack of photo's but the post above pretty much has all you'd ever need I think.
TLDR :
Great product at it's current price point
My (first edtion ) review of the 9H glass protector
I received the protector today.
Shipped by airmail, in a bubble-envelope, in which I found the cardboard casing.
Shockproof and protected, as it should with these protectors.
( I've ordered from Ebay a white-label once, and I got a origami protector, 100+ pieces of unbreakable puzzle-fun )
First impression is a perfect one, and upon opeing, I found everything I needed.
Cleaning - I cleaned my phone, and outlayed the glss protector on my display.
In contrary to "plastic's" it did not directely adhese, so I could move it to it's correct position. ( needle / knife point )
Pressing down from the inside out, it stuck perfectly with no dust or bubble's
( again .... mindblowingly perfect after 100's of plastic protectors )
The look & Feel ...
It feels amazing, smooth, likt the 'real' thing, i did not notice any lag or ghost-touches, just like if you're touching the regular screen.
The only thing ( My OCD :+ ) througt the glass you still see something of a riser between the samsung & protector.
It appears there is a ( samsung applied ) protector allready installed.
Anyone else ever noticed this ?
pic's
Great screen protection for under $10
I've been using the ZeroLemon 9H glass for almost a week now and overall I am very happy with it. I've used all the major brands before and the ZeroLemon is just as good as any of them. The glass is crystal clear with the fit being perfect and achieving a bubble free installation was a breeze with the included materials. The surface is very slick with fantastic touch response. It cleans easily and over the past 6 days has remained scratch free. One thing I must note is that the protector goes nearly edge to edge and does not leave room for a case that has heavy lip overhang onto the screen. With my Commuter wallet the rubber lip goes up and over the protector which isn't a big deal but it causes the silicone bunch up by the home button. With a price point under 10 dollars this screen protector is a major win and is easy to recommend to anyone looking for affordable screen protection.
Hi, now i got that protector.. I had different protector before.. Package is good and it included same stuff like other protectors.. That home button is lower when glass is on.. There could be some home button with sticker that i can add it to get it back to normal. Glass fits very good. Only thing that i dont know how much its resist.. y
It would be good if there is some video that you show how much your protector resist all kind of scratching? This is very good. I think that your products dont need any this kind testing if products are like this. But i didnt found this on ebay? All users dont use amazon so that would be good? But overall: big thanks that you choose me to one of those testers.. This glass prorector is perfect. Only the glass stamina/resistance is unknown that how much its takes all kind of using
Sent from my SM-G900F using XDA Free mobile app
I have received my Protector and have been using it for about 1 week now.
I have decided not to upload photos since the good users above me have already uploaded all that there is to be seen.
Prior to my zerolemon glass protector i was using one of those cheap china glass protector's and i would say that Zerolemon's is of a much higher quality. Previously when my screen was off there would be a "rainbow" effect on the glass and i do not have this issue anymore. The cut is much better and it protects to the maximum potential. The glass is smooth and fingerprint resistant and it cleans easily with a microfiber cloth.
The packaging was very good as well and application was a breeze with plenty of room for adjustments if you made mistakes in alignment.
I would highly recommend this product!
Does this work with the case for the 8500mAh battery as well as the Slim Razor case?
Sent from my toaster
blackknightavalon said:
Does this work with the case for the 8500mAh battery as well as the Slim Razor case?
Sent from my toaster
Click to expand...
Click to collapse
I'm sure it will. But I'm not 100%. Im getting a review unit of the 8500mAh battery so i will let you know when i get it. But I'm 95% sure it will.
If anyone is interested, this tempered glass screen protector does indeed work 100% with the 8500mAh ZeroLemon battery with rugged case
Man this phone feels indestructible with the rugged extended battery case and tempered glass screen protector
What about the Slim Razor case?
Sent from my toaster
This protector not negatively effects the finger print scanner? Is it available on eBay (manufacturer listing )?
I'm still waiting to see if this screen protector will get damaged by this case or not.
android addicts said:
This protector not negatively effects the finger print scanner? Is it available on eBay (manufacturer listing )?
Click to expand...
Click to collapse
It goes around the home button
Hellscythe said:
It goes around the home button
Click to expand...
Click to collapse
This looks like it comes out of the same factory as the NuGlas. The glass and package look the identical. The same alcohol package and location.
http://www.ebay.com/itm/271565796115?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Any more feedback on this glass protector? I was thinking of getting something better than those you get on ebay for 5€/6-7$ and from a bit of well known brand. I have one of those cheap ones on my current phone and it doesn't seem bad, but i haven't dropped it yet so i don't know.
I looked into the ones from spigen but they are crazy expensive. I did read on amazon a review that said that the 9h hardness wasn't good and it would scratch easily. The ones that have this, do you find that to be true?
Also, i see they mention lifetime warranty (At least on amazon where im looking). How would that work? I would send them my broken one(at my cost) and they would send one back for free or almost free? I read that there was a brand that did that.

What Plastic Screen Protectors are you using on the Note 4?

What Plastic Screen Protectors are you using on the Note 4? I'm under the notion that typical PET film is compatible with most cases.
I got the Zagg HDX screen protector and I'm pretty happy with it. I was hoping for tempered glass, but I don't think that's going to happen any time soon. The HDX protector was easy to install and it feels great. No issues with s-pen making divots or marks so far (been about a week of use).
INITIALLY... like immediately after you put it on, it feels a bit "sticky" when you run a finger over it. Just clean it off though and it's fine. Must be some residual "sticktion" from the films that cover the film prior to install.
+1 for the Zagg HDX. It's more expensive, but well worth it. The glass protectors look funky on this phone, and you can barely tell the Zagg is on there except for the somewhat sharp edge. I usually go without a protector, but the Note 4 is VERY scratchable... I had several light scratches in the coating that could only be seen in the right light only after a few days of use, so I had to get the protector.
I can rest-assure you its very hard not to get even the tiniest scratch on the shiny metal portions of the Note 4 especially the first time you put the phone in a case. When buying new, the device jostles while in transit, and I've seen scratches in areas where no one will see; that's just me.
Is the HDX as thin as one of those cheap plastic screen protectors found on eBay?
The HDX is a little thicker than the cheap ones. It's a multi-layer construction and provides impact resistance. It's still thin and flexible enough that it handles the slight curve at the edge of the screen and doesn't halo or anything. AND... I'm using the Samsung case and it works with that perfectly.
I'm currently using the iCarez film protector and it does not fit with my Seidio Surface case because it's too thick. Has a bubble in the lower left corner I can't get rid of and when I put the phone in my Akron Mega Grip car mount the side arms cause a large bubble on the left side. Not sure how thick it is but hoping for better results with the Zagg HDX which is 1 mm thick. Also don't like S Pen feel with the iCarez film.
I've been using Spigen Steinheil screen protectors since I first got a Motorola OG Driod. The Steinheil have always been durable and protective of my screens. I have a Spigen Steinheil Crystal screen protector on my Note 4. It works well and doesn't interfere with the native screen. They come 3 in a pack.
Zagg hdx until my iloome shows up
See here. Double thread?
http://forum.xda-developers.com/showthread.php?t=2987371
Thanks, moderators please close this thread or merge if applicable.
eksoccer99 said:
See here. Double thread?
http://forum.xda-developers.com/showthread.php?t=2987371
Click to expand...
Click to collapse
TechMatte screen protectors are the best quality, and best value!
http://www.amazon.com/gp/aw/d/B00MX...SY200_QL40&dpPl=1&dpID=510dhI4oDpL&ref=plSrch

Best non glass S6 screen protector?

Are there any curved/wet install screen protectors that will fit round the curved edges of the S6 or is a glass one the way forward?
I am clumsy and outdoors lots so would want some proection and it seems a lot of the plastic protectors only just about cover the screen.
I was very satisfied with the Spigen non-glass screen protector. It covered almost all of the screen, which surprised me. I only took it off because I prefer glass protectors.
Spigen screen protectors leave gaps around the border. Not as much as glass sp. This is to accommodate "case friendly" design.
HKSpeed said:
I was very satisfied with the Spigen non-glass screen protector. It covered almost all of the screen, which surprised me. I only took it off because I prefer glass protectors.
Click to expand...
Click to collapse
Interesting! I thought I read it only just covered the screen? Does it overlap slightly? Maybe it was earlier version!
JayX2A said:
Interesting! I thought I read it only just covered the screen? Does it overlap slightly? Maybe it was earlier version!
Click to expand...
Click to collapse
No screen protector I know of covers more than the screen. Are you using a case? If yes, which one?
HKSpeed said:
No screen protector I know of covers more than the screen. Are you using a case? If yes, which one?
Click to expand...
Click to collapse
Not got the phone yet - was pre ordering bits! I don't mean the whole front of the phone. On the spigen website it shows the protector being slightly wider than the display, but review I read elsewhere seem to have it cut quite narrow and it barely covers the active part of the screen.
This is the Spigen plastic screen protector I ordered below. I always use a case and it covers most of the screen. There's a tiny gap, but I wasn't bothered by it.
http://www.amazon.com/gp/product/B00QU4N0EI
A case option is the Spigen Ultra Hybrid FX case. Its the $17.99 option in the link below. It covers the entire phone (front, back, edges). Then you don't need a screen protector.
http://www.amazon.com/gp/product/B00QU4PN84
Reviews and photos of it: http://www.amazon.com/gp/customer-reviews/RT1Z3ENHAIQ8Z and http://www.amazon.com/gp/review/RDXA8F1JMNCI4
Below is a review of the case for an iPhone 6. It's in Japanese, but you get the idea. There's no S6 video review available.
Despite my comments in this thread, I'm not a Spigen fanboy LOL. I no longer use the Spigen screen protector (I have a no-name glass now) and I'm swapping my Spigen case for a Ringke Fusion.
HKSpeed said:
This is the Spigen plastic screen protector I ordered below. I always use a case and it covers most of the screen. There's a tiny gap, but I wasn't bothered by it.
http://www.amazon.com/gp/product/B00QU4N0EI
A case option is the Spigen Ultra Hybrid FX case. Its the $17.99 option in the link below. It covers the entire phone (front, back, edges). Then you don't need a screen protector.
http://www.amazon.com/gp/product/B00QU4PN84
Reviews and photos of it: http://www.amazon.com/gp/customer-reviews/RT1Z3ENHAIQ8Z and http://www.amazon.com/gp/review/RDXA8F1JMNCI4
Below is a review of the case for an iPhone 6. It's in Japanese, but you get the idea. There's no S6 video review available.
Despite my comments in this thread, I'm not a Spigen fanboy LOL. I no longer use the Spigen screen protector (I have a no-name glass now) and I'm swapping my Spigen case for a Ringke Fusion.
Click to expand...
Click to collapse
Have the Fusion on my Nexus - pretty good but teh back is coming away from the sides now. Like the look of the Rinke slim though.
Got some Spigen ones, they are pretty close to the size of the screen. Have to be so careful to line it up properly! Shame they didnt make it that fraction bigger, but I guess that was not possible due to the screen curve.
Ordered spiegen ones too, from amazon, 2 protectors wtih shipping costed 16.70€ but i have always dreamed of getting rid of that thick and heavy tempered protector.... they really do add weight and thickness to phone, especially if you decide to put front and back tempered protectors
Duzzy5 said:
Ordered spiegen ones too, from amazon, 2 protectors wtih shipping costed 16.70€ but i have always dreamed of getting rid of that thick and heavy tempered protector.... they really do add weight and thickness to phone, especially if you decide to put front and back tempered protectors
Click to expand...
Click to collapse
I was tryiing to find a 0.2mm glass one as the thread on here has that as the best one - but they donn't ship to UK
They're hard to find, I've seen a few on ebay.com but there are some glass protectors that will cover almost all of the phone. They're the ones that go over the buttons with a pass-through for the fingerprint sensor/home button. They have an entirely identical full front look. Like this one, but not edge of course, they make them for flat S6s too but the flat ones being the ones that are hard to find: http://www.ebay.com/itm/Samsung-Gal...hash=item4d3e1f582c:m:mF-rpmie8VK2iab6MR9K5EQ
benjmiester said:
They're hard to find, I've seen a few on ebay.com but there are some glass protectors that will cover almost all of the phone. They're the ones that go over the buttons with a pass-through for the fingerprint sensor/home button. They have an entirely identical full front look. Like this one, but not edge of course, they make them for flat S6s too but the flat ones being the ones that are hard to find: http://www.ebay.com/itm/Samsung-Gal...hash=item4d3e1f582c:m:mF-rpmie8VK2iab6MR9K5EQ
Click to expand...
Click to collapse
Ordered a couple of super cheap 0.26mm ones that I found online.
https://www.replacebase.co.uk/samsu...or-0-2mm-ultra-clear-with-oleophobic-coating/
Arrived yesterday and look ok - will see how they go on and if there are any halo issues.
JayX2A said:
I was tryiing to find a 0.2mm glass one as the thread on here has that as the best one - but they donn't ship to UK
Click to expand...
Click to collapse
I have a SUPER thin tempered glass screen protector for the front and back of my s6. On the back it is quite large so it has the halo but on the front it is cut so it just about covers the actual display bit, so there is no halo on the front. It covers the samsung logo at the top and the capacitive buttons at the bottom like any other screen protector. Both costs me £2.49 on eBay UK. After using a much thicker tempered glass screen protector on my s3 I would say that the thicker ones feel as if they would offer better drop protection.

ESR cases and tempered glass screen protectors (and XDA promo codes!)

ESR reached out to me to see if I wanted to test any of their new Pixel 4XL accessories so of course I said yes. I'm using their tempered glass case on my 3XL and really like it, and it is good to see that they expanded their lineup for the 4XL. They sent the tempered glass case (Mimic) and protectors, the slim clear case (Zero,) as well as the kickstand case in both clear and black. The cases are all TPU based so they are flexible, and of course the Mimic has a tempered back which adds some rigidity. Since the Nexus 6P I've had a white phone and to show off the color always preferred the TPU sides with a polycarbonate back, but I've found that the glass back is even better in terms of clarity and scratch resistance. While no better or worse than polycarbonate, the smooth back of the Mimic does make it slipperier if you set it down on an angled surface (say, your leg) while the full TPU cases offer just a bit of grip to keep it in place better. All of these ESR cases use what seems to be good quality TPU with the dot matrix pattern to avoid the case sticking to the phone. I was actually impressed that the Mimic offered that, despite only having TPU edges. The "black" kickstand case is more of a smoke color and is semi-transparent. Not sure how well it will pair with the orange or white Pixel 4, but I've got an orange coming so I'll update with pictures once it arrives. The screen protector comes in a two pack and appears to be full adhesive, despite the black border. The sensor areas aren't cut out, but they don't have any adhesive. Time will tell if those areas become dust magnets or not. Obviously without a phone I'm not using them yet, but at least initially the coating feels very smooth.
In the images you're looking at, from left to right, the kickstand case, the Mimic and the Zero. My 3XL has the Zero on, with the 4XL Zero next to it for comparison.
I will of course update this post once my phone arrives, but I know that some of you will start getting phones in the coming days and wanted to throw out my initial opinions. They're offering XDA users a 20% discount with the codes below, and some of the Pixel 4 cases may have a 5% discount on the Amazon page which will stack if available.
Pixel 4XL
Metal Kickstand Case, Clear F8R72K6O
Essential Zero Soft TPU Case, Clear 4X7NAEF8
Mimic Series Tempered Glass Case, Clear 99TV34ZG
Tempered-Glass Edge-to-Edge Screen Protector, 2-Pack ZZNHDQYA
Pixel 4
Metal Kickstand Case, Clear YYEWIX3H
Essential Zero Soft TPU Case, Clear F2N6DUNN
Mimic Series Tempered Glass Case, Clear UI6GFPSP
Tempered-Glass Edge-to-Edge Screen Protector, 2-Pack 46HGDZ9O
View attachment 4851421
View attachment 4851419
View attachment 4851423
View attachment 4851425
View attachment 4851427
View attachment 4851429
View attachment 4851431
Thanks for the codes.
I had already ordered the mimic and essential zero for my (to be delivered tomorrow) 4xl and actually received them yesterday.
I immediately reordered at the discounted prices and initiated the free returns to amazon.
I know it's only a savings of approximately $5.50, but it's definitely worth it to me and I'm happy about it.
Hopefully the cases fit great on my new phone. I want to show off my "panda".
Thanks again
I have the zero clear here waiting for the phone to arrive tomorrow and I just ordered the clear with kickstand and used coupon code. Thanks
Just ordered the mimic. I like the idea of it. We'll see how they execute.
P4XL arrived today, here are pictures of the Mimic, Kickstand (in black) and Zero (in that order) as well as the installed screen protector. I don't think I'm crazy about the screen protector; it went on easily and looks good at a distance, but on dark screens you can see a slight halo around the edges of the display just before the protector's black border. It also feels nice and smooth, but smudges pretty easily.
As for the cases, unlike the P3 the Mimic has a lip where the glass meets the TPU on the back, which gives it just a little grip. I like it. The black Kickstand case definitely would work best on the black, if you're going white or orange I'd suggest the clear case. The Kickstand itself is very sturdy and stays in place at any angle you place it. It has enough strength to prop up the phone with the kickstand lying flat on the table, meaning you can adjust the phone at any angle you'd like. It also adds a pretty sizable hump to the bottom, fwiw. The Zero feels nice and slim, though I'm not sure it's noticably slimmer than the Mimic. The full, smooth TPU gives it a different in hand feel for sure and more grip when laid down on a smooth surface.
All in all I like all 3 cases, but personally I'll probably stick with Mimic. I'll also likely try some other screen protectors, though I can't say any Pixel has had good screen protector options.
View attachment 4853807View attachment 4853809View attachment 4853811View attachment 4853813View attachment 4853817View attachment 4853815
I purchased the zero but haven't put it on yet. This phone feels really good in the hand and I want to go naked.
Sent from my Pixel 4 XL using XDA Labs
kellybrf said:
ESR reached out to me to see if I wanted to test any of their new Pixel 4XL accessories so of course I said yes. I'm using their tempered glass case on my 3XL and really like it, and it is good to see that they expanded their lineup for the 4XL. They sent the tempered glass case (Mimic) and protectors, the slim clear case (Zero,) as well as the kickstand case in both clear and black. The cases are all TPU based so they are flexible, and of course the Mimic has a tempered back which adds some rigidity. Since the Nexus 6P I've had a white phone and to show off the color always preferred the TPU sides with a polycarbonate back, but I've found that the glass back is even better in terms of clarity and scratch resistance. While no better or worse than polycarbonate, the smooth back of the Mimic does make it slipperier if you set it down on an angled surface (say, your leg) while the full TPU cases offer just a bit of grip to keep it in place better. All of these ESR cases use what seems to be good quality TPU with the dot matrix pattern to avoid the case sticking to the phone. I was actually impressed that the Mimic offered that, despite only having TPU edges. The "black" kickstand case is more of a smoke color and is semi-transparent. Not sure how well it will pair with the orange or white Pixel 4, but I've got an orange coming so I'll update with pictures once it arrives. The screen protector comes in a two pack and appears to be full adhesive, despite the black border. The sensor areas aren't cut out, but they don't have any adhesive. Time will tell if those areas become dust magnets or not. Obviously without a phone I'm not using them yet, but at least initially the coating feels very smooth.
In the images you're looking at, from left to right, the kickstand case, the Mimic and the Zero. My 3XL has the Zero on, with the 4XL Zero next to it for comparison.
I will of course update this post once my phone arrives, but I know that some of you will start getting phones in the coming days and wanted to throw out my initial opinions. They're offering XDA users a 20% discount with the codes below, and some of the Pixel 4 cases may have a 5% discount on the Amazon page which will stack if available.
Pixel 4XL
Metal Kickstand Case, Clear YYEWIX3H
Essential Zero Soft TPU Case, Clear F2N6DUNN
Mimic Series Tempered Glass Case, Clear UI6GFPSP
Tempered-Glass Edge-to-Edge Screen Protector, 2-Pack 46HGDZ9O
Pixel 4
Metal Kickstand Case, Clear F8R72K6O
Essential Zero Soft TPU Case, Clear 4X7NAEF8
Mimic Series Tempered Glass Case, Clear 99TV34ZG
Tempered-Glass Edge-to-Edge Screen Protector, 2-Pack ZZNHDQYA
View attachment 4851421
View attachment 4851419
View attachment 4851423
View attachment 4851425
View attachment 4851427
View attachment 4851429
View attachment 4851431
Click to expand...
Click to collapse
Did you know that you have the links grouped and labeled incorrectly? The top group of links says Pixel 4XL - but they are actually for PIXEL 4 products and the bottom group is labled Pixel 4 while the links are all for 4 XL products? Hopefully everyone clicking the links looks carefully before buying anything - or they will be disappointed - I thought you might want to update the OP .....thanks for the options though - look like great products....
Just now I order " Mimic Series Tempered Glass Case " I don't like to use the case all the time. I am a fan of clear full body skin. But I like the idea of ​​the glass case and I am very interesting to try it
Sent from my Pixel 2 using Tapatalk
Geekser said:
Did you know that you have the links grouped and labeled incorrectly? The top group of links says Pixel 4XL - but they are actually for PIXEL 4 products and the bottom group is labled Pixel 4 while the links are all for 4 XL products? Hopefully everyone clicking the links looks carefully before buying anything - or they will be disappointed - I thought you might want to update the OP .....thanks for the options though - look like great products....
Click to expand...
Click to collapse
I did not, thanks and fixed!
Here's some pics of the zero on the 4 xl. It's a good case. The cutouts are lined up good and it's not too bulky. It also has the dot matrix so you don't have spots where it sticks to the phone. Definitely a good case but the phone feels so good naked, I don't think I'll leave it on very long.
Sent from my Pixel 2 XL using XDA Labs
kellybrf said:
I did not, thanks and fixed!
Click to expand...
Click to collapse
I wasn't paying attention and bought the pixel 4 version of the case because of that. No biggy, just made me laugh when I opened the packaging and went to put it on. Refund started and correct one ordered.
The screen protector is really great. Cant tell its on.
What happened to the Mimic black?
I'm using mimic clear currently on my 4xl and it's very nice. With the coupon code and prime discount I paid about $14. Really good deal. Paid about $7 for the essential zero but haven't messed with that one yet.
Sent from my Pixel 4 XL using Tapatalk
Wasn't a fan of the screen protector. Super easy to put on and it doesn't block any sensors. But the rounded corners come out too far cutting of a little bit of real estate. And it holds on to fingerprints so keep a cloth handy. Frustrating as they mailed everything else.
Bought the ESR screen protector 2-pack and it didn't go well for me at all. First one didn't apply properly so had to bin that one, second one spontaneously shattered within 2 days. Got a Spigen one and no issues yet.
So I got the ESR Mimic case and I have to say it's a piece of crap. It's like a 99 cent TPU case with a piece of tempered glass glued protector glued to the back. Mine came in with a bunch of scratches and scuffs that couldn't be buffered off. No point in using a clear case when there's visual imperfections that take awake from the viewing experience. I bet they make a huge markup on this case considering they're charging $22 and that's with the discount. I'm pretty sure they paid for their reviews on Amazon. Returned the same day. Go for the Caseology Skyfall instead it's $14 and a way more attractive/high quality case. It doesn't have a glass back but it is leaps and bounds ahead of the ESR Mimic in terms of quality. https://www.amazon.com/gp/product/B07VFSBQDH/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Zagg Glass Elite Pixel 4 XL Review (~2 months use). Pictures with a few cases

Hey everyone. Been seeing a few threads here with folks struggling with tempered glass screen protectors for the Pixel 4 XL, so I thought I would share what I can about my experiences so far.
Some notes:
- been using this since beginning of November
- I included pictures of two of the cases I have so that you can see the lip, but I also used this with an unpictured Spigen Neo Hybrid and the protector worked fine
- if you want a cheap alternative, the OMOTON was OK but I had touch issues along the edges. Here is a link if you want to check it out (had great coverage the and install tray worked great): https://www.amazon.ca/OMOTON-Google-XL-Screen-Protector/dp/B07VCJHS76
- I am very picky
- webpage for the model I am reviewing below: https://www.zagg.com/en_us/glass-elite-pixel-4-xl
- pictures taken with my old 2XL as best as I could.
- I have not dropped my phone yet thankfully.
Summary:
- this is the best protector I have found so far. I would prefer a Whitestone Dome but I don't think they are making one for the 4XL (based on a response I got from the Amazon store).
- I suggest this protector if you want full coverage* (see review below) and full adhesive and you don't mind spending extra cash. Install is easy with included install tray.
Pros of this protector:
- was available locally at Best Buy and if I didn't like it, I could easily return it.
- is what I would consider full coverage. I don't get any weird reflections on the sides and the screen is not cutoff. If I look at the phone from an extreme angle on one side I can see the image get distorted due to the glass edge lining up perfectly with the AMOLED screen edge, but that's not something that happens in everyday usage. I have pictures of this below. The screen protector lines up perfectly with the lit portion of the screen.
- full adhesive
- no black bars or screen cutoffs. Full clear.
- I got some bubbles when i installed it. They were gone by the next day.
- I had slight touch sensitivity on one side on the first day of install, but it went away by the next day. Sensitivity is as good now as no protector.
- has install tray
- fits the three cases I tried with it; NOMAD rugged leather case, Spigen Liquid Air, and Spigen Neo hybrid. There is still a bit of lip around the sides that allows you to place the phone face-down no problem, and I can swipe with my thumb from the sides of the case to the protector and it does not feel sharp, etc.
Links to the cases I have used here:
https://hellonomad.com/collections/pixel-4/products/rugged-case-black-pixel-4-xl
https://www.spigen.com/collections/...l-4-xl-case-neo-hybrid?variant=30271183880239
https://www.spigen.com/collections/...l-4-xl-case-liquid-air?variant=30271175983151
Cons:
- expensive. I paid $40CDN
- oleo-phobic coating did not last very long. Much better on the Whitestone Dome Glass I had on my 2XL.
- no room for error installing. The screen lines up perfectly with the lit screen, so you need to take your time installing, even with the tray.
- little/no protection at the top.
Some pictures below, with side and front pictures of the Nomad and Liquid air cases.
$40? That's ridiculous. No thanks
Looks like there's some halo in pictures #2 and #5 on the upper left side. Zagg really is too expensive for what they offer especially when it's a one and done. Would be nice to have whitestone but they had a bunch of issues with with the 3/3XL. They cheapened their loca so there was tons of spider webbing and lifting for many.
zetsumeikuro said:
Looks like there's some halo in pictures #2 and #5 on the upper left side. Zagg really is too expensive for what they offer especially when it's a one and done. Would be nice to have whitestone but they had a bunch of issues with with the 3/3XL. They cheapened their loca so there was tons of spider webbing and lifting for many.
Click to expand...
Click to collapse
I had to turn the phone in such a way to get the halo noticeable, ,but yes, in this price range I would have preferred the Whitestone for 100% sure.
This top with no protection bothers me extremely.
This picture isn't very good but these fit great with no halo at all. You get 3 in a pack and it also comes with an installation tray. This one has been on for 2 month and they're only $8.99 for the 3 pack.
https://www.amazon.com/gp/product/B07YCBZCP3/ref=ppx_yo_dt_b_asin_title_o08_s01?ie=UTF8&psc=1
airmaxx23 said:
This picture isn't very good but these fit great with no halo at all. You get 3 in a pack and it also comes with an installation tray. This one has been on for 2 month and they're only $8.99 for the 3 pack.
https://www.amazon.com/gp/product/B07YCBZCP3/ref=ppx_yo_dt_b_asin_title_o08_s01?ie=UTF8&psc=1
Click to expand...
Click to collapse
hate that there is no top protection.. It doesn't feel complete
ceelos218 said:
hate that there is no top protection.. It doesn't feel complete
Click to expand...
Click to collapse
I doubt you'll find one that does, the Soli sensor doesn't work very well through a screen protector. Most protectors also don't cover the camera.
airmaxx23 said:
I don't you'll find one that does, the Soli sensor doesn't work very well through a screen protector.
Click to expand...
Click to collapse
I meant for there to be cutouts instead. I'm waiting for intelliglass 3rd revision for their tempered glass at the moment. it covers the full screen ?
ceelos218 said:
I meant for there to be cutouts instead. I'm waiting for intelliglass 3rd revision for their tempered glass at the moment. it covers the full screen
Click to expand...
Click to collapse
Gotcha, I just don't like the feel of the little tabs of glass with the little cutouts at the top.

Categories

Resources