Related
Hi,
While I was trying to export the original ROM from one Huawei G620S to another and something went wrong.
On the phone I was trying to backup the ROM, I was using ADB, as I used the command "fastboot flash recovery twrp.img" after the reboot my phone locks up in fastboot & rescue mode.
I cannot access Recovery mode by pressing volume up + power button, it always boots in fastboot & rescue mode.
ADB does not recognise the device anymore.
I'm stuck and in need of assistance (it was my wifes phone, so I'm a gonner...).
If you have a solution, please make the explanation easy as I am not an expert.
Thank you
okidok said:
Hi,
While I was trying to export the original ROM from one Huawei G620S to another and something went wrong.
On the phone I was trying to backup the ROM, I was using ADB, as I used the command "fastboot flash recovery twrp.img" after the reboot my phone locks up in fastboot & rescue mode.
I cannot access Recovery mode by pressing volume up + power button, it always boots in fastboot & rescue mode.
ADB does not recognise the device anymore.
I'm stuck and in need of assistance (it was my wifes phone, so I'm a gonner...).
If you have a solution, please make the explanation easy as I am not an expert.
Thank you
Click to expand...
Click to collapse
Greetings and welcome to assist. Is this the twrp you were trying to flash ?
https://forum.xda-developers.com/android/development/twrp-t3120744
did you unlock your bootloader first and can you fastboot into recovery mode ?
Regards
Sawdoctor
did you unlock your bootloader first and can you fastboot into recovery mode ?
Click to expand...
Click to collapse
Yes I unlocked the bootloader with the code Huawei sent me.
No, I have no access to the Recovery mode anymore
I used twrp-2.8.7.0-trltexx
The device will only boot in fastboot & rescue mode.
Thanks
Hi, any ideas ?
Thank you.
Hello,
I tried to flash my Alcatel ideal 4060a with custom rom following by the instructions in Thread. I got Install successful screen
but it is still booting in to TWRP recovery. when i try to reboot with bootloader option it is hanging at logo only for 30+ minutes. can anyone please help me out in this ? Thanks in advance
[email protected] said:
Hello,
I tried to flash my Alcatel ideal 4060a with custom rom following by the instructions in Thread. I got Install successful screen
but it is still booting in to TWRP recovery. when i try to reboot with bootloader option it is hanging at logo only for 30+ minutes. can anyone please help me out in this ? Thanks in advance
Click to expand...
Click to collapse
I realize this is a very old post, but in hopes that the information will be helpful to any current device owners, I'll address the question:
The AT&T Alcatel IDEAL (4060a) ships with a fully.unlocked bootloader. As such, installing TWRP custom recovery is simple to do once root of the stock OS is attained. NOTE: fastboot mode has been disabled on the 4060a by Alcatel (TCL). Trying to boot to bootloader mode from recovery or using the command
adb reboot recovery
from a terminal or command prompt will only reboot the device. Without fastboot mode, recovering a bricked device is very problematic unless the device will boot into TWRP recovery mode. From TWRP, a stock Android 5.1.1 ROM can be installed which will recover your device to its stock factory state. In the unfortunate event your device is hard bricked (unable to boot into either the OS or TWRP recovery mode), your only option is to push stock firmware to the device using a firehose programmer via Qualcomm HS-USB QDLoader (9008 mode), also known as Emergency Download Mode (EDL).
Please !!!, where do I find the "firehose programmer file" for the AT & T ALCATEL 406
AeonFlux1603 said:
I realize this is a very old post, but in hopes that the information will be helpful to any current device owners, I'll address the question:
The AT&T Alcatel IDEAL (4060a) ships with a fully.unlocked bootloader. As such, installing TWRP custom recovery is simple to do once root of the stock OS is attained. NOTE: fastboot mode has been disabled on the 4060a by Alcatel (TCL). Trying to boot to bootloader mode from recovery or using the command
adb reboot recovery
from a terminal or command prompt will only reboot the device. Without fastboot mode, recovering a bricked device is very problematic unless the device will boot into TWRP recovery mode. From TWRP, a stock Android 5.1.1 ROM can be installed which will recover your device to its stock factory state. In the unfortunate event your device is hard bricked (unable to boot into either the OS or TWRP recovery mode), your only option is to push stock firmware to the device using a firehose programmer via Qualcomm HS-USB QDLoader (9008 mode), also known as Emergency Download Mode (EDL).
Click to expand...
Click to collapse
Please !!!, where do I find the "firehose programmer file" for the AT&T ALCATEL 4060a? My Phone is hard Bricked.
hi Guys
I'm in the forum for a very long time as an assistant helper now it has got me hard I have an Axon 10 Pro with curly boot loader and trying to flash a TWRP I have somehow the device or SotA and SlotB have shrunk. The Axon Bootet permanently in 0.5 second cycle and also a FULL Restot or FULL Flash with EDL Tool has not changed anything. Likewise, a new flash about fastboot with the command (fastboot flash boot_a boot.img) the same for boot_b then try with fastboot command (fastboot boot twrp.img) Recovery to start without success fastboot erase boot_a and boot_b has also flashing new but it does not start. Always bootloop:crying::crying::crying::crying:
the Axon 10 pro is back because he had no backup of all we had from my Axon 10 pro made a backup with the edl tool (Backup all) and have then copied his efs backup purely and then this with then on the Axon 10 flashed the Axon 10 pro is now back
Where did you get the twrp from?
From udev
On his donload page
https://forum.xda-developers.com/showpost.php?p=80156866&postcount=3
I had a bootloop issue as well and even though I reflashed using the EDL tool, it doesn't erase and the errors remained, but when I entered EDL mode and reflashed using the Xiaomi Flash Tool, storage was completely erased and the device was flashed cleanly and booted correctly.
I've encountered a similar issue with my Axon (2020U version). I can boot into EDL but nothing else (no fastboot, recovery, etc.). I previously had TWRP up and running successfully, not sure what happened.
Is there a full EDL zip or similar that I can flash to return everything to stock? I tried restoring with the EDL tool but with no success
jbeaulieu said:
I've encountered a similar issue with my Axon (2020U version). I can boot into EDL but nothing else (no fastboot, recovery, etc.). I previously had TWRP up and running successfully, not sure what happened.
Is there a full EDL zip or similar that I can flash to return everything to stock? I tried restoring with the EDL tool but with no success
Click to expand...
Click to collapse
The reason the EDL tool may not work is that is doesn't have the capability to erase. The boot loop that occurs is usually due a corrupt bootfile. Use the MiFlash fastboot recovery tool. Make sure to select the clean all button at the bottom. Place your phone in EDL mode. Hit refresh to make sure your phone is detected. Select the EDL file and then hit flash.
jim262 said:
The reason the EDL tool may not work is that is doesn't have the capability to erase. The boot loop that occurs is usually due a corrupt bootfile. Use the MiFlash fastboot recovery tool. Make sure to select the clean all button at the bottom. Place your phone in EDL mode. Hit refresh to make sure your phone is detected. Select the EDL file and then hit flash.
Click to expand...
Click to collapse
Apologies for my ignorance - what exactly am I flashing? I see the "clean all" radio button, but I'm not sure what EDL package to flash after selecting that option - is there a 2020U package floating around that I'm not seeing?
jbeaulieu said:
Apologies for my ignorance - what exactly am I flashing? I see the "clean all" radio button, but I'm not sure what EDL package to flash after selecting that option - is there a 2020U package floating around that I'm not seeing?
Click to expand...
Click to collapse
The EDL package, use the same EDL package that you used with the EDL tool. Just select the "clean all" radio button. Select the path to the EDL , hit refresh once phone, in EDL mode, is detected, hit flash.
jim262 said:
The EDL package, use the same EDL package that you used with the EDL tool. Just select the "clean all" radio button. Select the path to the EDL , hit refresh once phone, in EDL mode, is detected, hit flash.
Click to expand...
Click to collapse
Okay, I'm trying to use MiFlash to restore the backup I took through the original EDL tool. The MiFLash tool is only timing out with a "cannot receive hello packet" - was this something you encountered as well?
jbeaulieu said:
Okay, I'm trying to use MiFlash to restore the backup I took through the original EDL tool. The MiFLash tool is only timing out with a "cannot receive hello packet" - was this something you encountered as well?
Click to expand...
Click to collapse
I did attempt to flash the wrong EDL file (They are region and device specific) and received that error. I have the Chinese version and once I downloaded the correct EDL file, I had no issues I have even maintained an unlocked boot loader, flashed Magisk and taken OTAs.
jim262 said:
I did attempt to flash the wrong EDL file (They are region and device specific) and received that error. I have the Chinese version and once I downloaded the correct EDL file, I had no issues I have even maintained an unlocked boot loader, flashed Magisk and taken OTAs.
Click to expand...
Click to collapse
Ah, okay. I have the US version - A2020U. Unless I'm mistaken, it looks like there isn't a full EDL zip file available for my version yet, so I might be stuck
There were EDL files up, but apparently they were taken down for some reason.
in the russians there are the 1.6 of the g model as edl (which one can use in a brick) but I do not know if this is synonymous with the u model as you would have to ask @Unjustified Dev or something
@MOD
I hope that the links are allowed here else delete please
1.6 g model edl
http://4pda.ru/forum/index.php?showtopic=965431&st=0#entry88768840
And the lonk too the forum
http://4pda.ru/forum/index.php?showtopic=965431
Chris axon 7 said:
in the russians there are the 1.6 of the g model as edl (which one can use in a brick) but I do not know if this is synonymous with the u model as you would have to ask @Unjustified Dev or something
@MOD
I hope that the links are allowed here else delete please
1.6 g model edl
http://4pda.ru/forum/index.php?showtopic=965431&st=0#entry88768840
And the lonk too the forum
http://4pda.ru/forum/index.php?showtopic=965431
Click to expand...
Click to collapse
Thanks for sharing these. @Unjustified Dev do you happen to know if the 1.6 2020G EDL would be able to be flashed to a 2020U model to recover from a brick? Or if not, is there a place to obtain the proper files, either here on the forums or via PM?
jim262 said:
I did attempt to flash the wrong EDL file (They are region and device specific) and received that error. I have the Chinese version and once I downloaded the correct EDL file, I had no issues I have even maintained an unlocked boot loader, flashed Magisk and taken OTAs.
Click to expand...
Click to collapse
Please share us the EDL file for the Chinese version.
has anyone found the US EDL file yet?
Futility's Forgotten Soldier said:
has anyone found the US EDL file yet?
Click to expand...
Click to collapse
Still waiting. I'm stuck on the EU version.
Hi
My Redmi note 7 pro is bricked and it is in locked state .
I tried flashing fastboot rom from edl mode
But it gaves errors like
1) cannot receive hello packet
2)Only nop and sig tag can be recevied before authentication.
Please help me guys regarding this its been a while without my phone
AwesomeAman said:
Hi
My Redmi note 7 pro is bricked and it is in locked state .
I tried flashing fastboot rom from edl mode
But it gaves errors like
1) cannot receive hello packet
2)Only nop and sig tag can be recevied before authentication.
Please help me guys regarding this its been a while without my phone
Click to expand...
Click to collapse
Firstly, can you still boot into Fastboot mode? Secondly, you said you flash fastboot ROM from EDL, how you get into that EDL mode, and you're flashing by MiFlash right?
Clear the information, I might help you!
LinhBT said:
Firstly, can you still boot into Fastboot mode? Secondly, you said you flash fastboot ROM from EDL, how you get into that EDL mode, and you're flashing by MiFlash right?
Clear the information, I might help you!
Click to expand...
Click to collapse
Answers:
Yes it is going on fastboot mode
I got into edl mode by opening back Pannell of my device and i connected edl points
I am flashing via mi flash.
Actually in mi flash tool by mistake i flashed fastboot rom by selecting flash and lock.
Now when i flash the same by selecting clean all option by putting my device on edl mode
It show cannot receive hello packet.
This put me in this trouble
AwesomeAman said:
Answers:
Yes it is going on fastboot mode
I got into edl mode by opening back Pannell of my device and i connected edl points
I am flashing via mi flash.
Actually in mi flash tool by mistake i flashed fastboot rom by selecting flash and lock.
Now when i flash the same by selecting clean all option by putting my device on edl mode
It show cannot receive hello packet.
This put me in this trouble
Click to expand...
Click to collapse
Right, then you did the testpoint trick to get in EDL mode! Ofcourse now you can't use MiFlash with clean all to flash your device since your device is now in brick state. Only solution now is to find the factory images of your device, along with an authenticated prog file then use QFIL to force flash into device. You may inbox me if need further instructions!
i have the same issue pls help
LinhBT said:
Right, then you did the testpoint trick to get in EDL mode! Ofcourse now you can't use MiFlash with clean all to flash your device since your device is now in brick state. Only solution now is to find the factory images of your device, along with an authenticated prog file then use QFIL to force flash into device. You may inbox me if need further instructions!
Click to expand...
Click to collapse
Sir, I have exact same device and I am also stuck in edl mode. It looks there are no patched firehose files for violet. Is there any possible way you can help??
Hello everyone! I am in dire need of help right now. I wanted to flash this pixel experience 13 custom rom while i was on OOS12. I unlocked my bootloader and then flashed the recovery image on the website using the cmd command in the fastboot mode. Now my device is showing me that the current image(recovery/boot) have been destroyed. I tried using this guide https://www.thecustomdroid.com/oneplus-nord-oxygenos-restoration-guide/ but I still could not restore my phone and I am unable to get past fastboot mode. I tried using MSM but my device is not being recognized and I am also unable to boot into EDL mode. I am quite literally stuck without a phone and in desperate need of help. Please help a brother out!!
hasan lakha said:
Hello everyone! I am in dire need of help right now. I wanted to flash this pixel experience 13 custom rom while i was on OOS12. I unlocked my bootloader and then flashed the recovery image on the website using the cmd command in the fastboot mode. Now my device is showing me that the current image(recovery/boot) have been destroyed. I tried using this guide https://www.thecustomdroid.com/oneplus-nord-oxygenos-restoration-guide/ but I still could not restore my phone and I am unable to get past fastboot mode. I tried using MSM but my device is not being recognized and I am also unable to boot into EDL mode. I am quite literally stuck without a phone and in desperate need of help. Please help a brother out!!
Click to expand...
Click to collapse
India, Europe, Global?
hasan lakha said:
Hello everyone! I am in dire need of help right now. I wanted to flash this pixel experience 13 custom rom while i was on OOS12. I unlocked my bootloader and then flashed the recovery image on the website using the cmd command in the fastboot mode. Now my device is showing me that the current image(recovery/boot) have been destroyed. I tried using this guide https://www.thecustomdroid.com/oneplus-nord-oxygenos-restoration-guide/ but I still could not restore my phone and I am unable to get past fastboot mode. I tried using MSM but my device is not being recognized and I am also unable to boot into EDL mode. I am quite literally stuck without a phone and in desperate need of help. Please help a brother out!!
Click to expand...
Click to collapse
My honest suggestions : Stay away from OOS12 ( even base ). Besides, if u want to boot into EDL, just force power off the device totally. Then press and hold both Vol +- and plug the device into the computer with MSM stared, ur device will be in EDL ( ofc, u will have to install all necessary drivers beforehand )