Related
Hi everyone, my XT925 is stuck in fastboot, and whenerver I try to flash it everything just fails; RSD shows this when I try to flash:
Failed flashing process. 1/20 flash partition "partition signed" -> Phone returned FAIL
I tried to flash this stock rom: XT925_vffr-user 4.1.2 9.8.2Q-8-XT925_VQU-26 1359487946
I had already rooted the phone and unlocked the bootloader too, and when I did an OTA update all hell broke loose, the phone now goes directly to fastboot mode, and shows this:
Downgraded secutiry version
Update gpt_main version failed
Failed to hab check for gpt_backup:0x35
failed to load GPT
CID read failure
Invalid CID status 0x69
No SP partition found
Fastboot reason: Invalid GPT
It also says Phone is LOCKED, Status Code:0
I think this means that somehow the bootloader is locked but I have already unlocked it; I don't know what to do, please help
Some Help
Hi, the same thing happened to me when I tried a ROM from a VFR on my LATAM RAZR HD. The OTA messed everything up.
You can check how I solved it on the thread I created asking for help:
http://forum.xda-developers.com/showthread.php?t=2273574
Basically you need to treat your phone as LOCKED bootloader, meaning only flashing of a version that belongs to the region of your phone and newer or same version as the failed OTA will allow you to flash. Since this is the only way LOCKED bootloader phones will flash.
Rokwenelenya said:
Hi everyone, my XT925 is stuck in fastboot, and whenerver I try to flash it everything just fails; RSD shows this when I try to flash:
Failed flashing process. 1/20 flash partition "partition signed" -> Phone returned FAIL
I tried to flash this stock rom: XT925_vffr-user 4.1.2 9.8.2Q-8-XT925_VQU-26 1359487946
I had already rooted the phone and unlocked the bootloader too, and when I did an OTA update all hell broke loose, the phone now goes directly to fastboot mode, and shows this:
Downgraded secutiry version
Update gpt_main version failed
Failed to hab check for gpt_backup:0x35
failed to load GPT
CID read failure
Invalid CID status 0x69
No SP partition found
Fastboot reason: Invalid GPT
It also says Phone is LOCKED, Status Code:0
I think this means that somehow the bootloader is locked but I have already unlocked it; I don't know what to do, please help
Click to expand...
Click to collapse
still cannot flash
I tried to flash this firmware, it's the more recent from telcel: 9.8.2Q-50-XT925_VQLM-21_AmericaMovil_MX_SIGNED_S12_USAVANQUTELMXLA020.0R_VANQJBTELMXLA_P009_A013_S1FF_v2_CFCv2_fb.xml
it didn't work
what can I do????
Is your phone from Telcel Mexico originally?
I ask because on my case it is. The firmware you need to flash has to be the latest one based on your phone region, on my case I flashed the Brasil Retail. Because my phone is from Latin America. So it will depend on were your phone is from. This is all because your phone is acting up as LOCKED bootloader so flashing a version from another region is not possible.
Also because your phone got stuck on an OTA you need to make sure the version you flash is at least the same one as the OTA, newer if possible.
Rokwenelenya said:
I tried to flash this firmware, it's the more recent from telcel: 9.8.2Q-50-XT925_VQLM-21_AmericaMovil_MX_SIGNED_S12_USAVANQUTELMXLA020.0R_VANQJBTELMXLA_P009_A013_S1FF_v2_CFCv2_fb.xml
it didn't work
what can I do????
Click to expand...
Click to collapse
Worked but not completely
Ok, I flashed the rom that you recomended, the phone finally boots into android, but now is always on "emergency calls only" mode, with or without Sim card any suggestions?
Phone should be back as unlocked bootloader
If you flashed a version fine now, I'm sure that at least you should be able to go into fastboot and see your bootloader as unlocked.
If this is true, then you can go ahead and flash any version available, either being an older Stock version (downgrade) or any custom ROM of your liking, like CM 10.1. You should try them and see if you get a proper signal.
Also in your case, if your bootloader is unlocked again, I recommend you installing the version that you know worked fine for you. It won't matter that it's older than the one you flashed right now. It's just a matter of following the guide for unlocked bootloaders to downgrade versions.
Good luck! :fingers-crossed:
Phone almost repaired
Ok, I flashed the latest stock rom from telcel, the phone is no longer on emergency call mode, the wifi and data connection works fine, but it always shows that there is no reception from my carrier, I can't make calls or send sms because when I try it the phone shows "mobile network not available", the funny thing is that I can connect to de data network from my carrier. What can be causing this trouble?
Honestly I have not faced this before it sounds very weird!
I can think of two possibilities, one your phone lost it's IMEI. You should check if it's still there, either by going through configuration and Phone Information or by the "secret code" on the dialer: *#*#4636#*#*
And in the following menu go into Phone Information. The first thing you should see is your IMEI. If it's not there, look for the how to restore your IMEI thread on here. I know it's there somewhere.
The second thing I can think of is to try to force your phone into your carrier, go into Cellular Networks area and manually choose your provider, this could force the registration.
Hopefully this will be of help!
Rokwenelenya said:
Ok, I flashed the latest stock rom from telcel, the phone is no longer on emergency call mode, the wifi and data connection works fine, but it always shows that there is no reception from my carrier, I can't make calls or send sms because when I try it the phone shows "mobile network not available", the funny thing is that I can connect to de data network from my carrier. What can be causing this trouble?
Click to expand...
Click to collapse
Fastboot Error / Invalid GPT
Rokwenelenya said:
Hi everyone, my XT925 is stuck in fastboot, and whenerver I try to flash it everything just fails; RSD shows this when I try to flash:
Failed flashing process. 1/20 flash partition "partition signed" -> Phone returned FAIL
I tried to flash this stock rom: XT925_vffr-user 4.1.2 9.8.2Q-8-XT925_VQU-26 1359487946
I had already rooted the phone and unlocked the bootloader too, and when I did an OTA update all hell broke loose, the phone now goes directly to fastboot mode, and shows this:
Downgraded secutiry version
Update gpt_main version failed
Failed to hab check for gpt_backup:0x35
failed to load GPT
CID read failure
Invalid CID status 0x69
No SP partition found
Fastboot reason: Invalid GPT
It also says Phone is LOCKED, Status Code:0
I think this means that somehow the bootloader is locked but I have already unlocked it; I don't know what to do, please help
Click to expand...
Click to collapse
adolfovm said:
Hi, the same thing happened to me when I tried a ROM from a VFR on my LATAM RAZR HD. The OTA messed everything up.
You can check how I solved it on the thread I created asking for help:
http://forum.xda-developers.com/showthread.php?t=2273574
Basically you need to treat your phone as LOCKED bootloader, meaning only flashing of a version that belongs to the region of your phone and newer or same version as the failed OTA will allow you to flash. Since this is the only way LOCKED bootloader phones will flash.
Click to expand...
Click to collapse
Hello,
I have an xt926 and I tried to take the latest OTA upgrade.
My bootloader was unlocked, and I temporarily un-rooted with Voodoo OTA Rootkeeper.
My phone then got stuck in Fastboot with the same errors:
Phone is LOCKED, Status Code:0
Downgraded secutiry version
Update gpt_main version failed
Failed to hab check for gpt_backup:0x35
failed to load GPT
CID read failure
Invalid CID status 0x69
No SP partition found
Fastboot reason: Invalid GPT
I can't get the phone out of fastboot with the error messages.
The Windows Utility returned <remote access failure>
RSD returned <getvar errors>
(I tried deleting the 2 <getvar> lines in the .xml files, but then RSD said phone returned failure "sbl1.mbn".
I downloaded & installed the adb package, and I got the phone to respond to fastboot commands, but it still ended up in Fastboot with the above list of errors.
Any suggestions?
Thanks
doctorwho2 said:
Hello,
I have an xt926 and I tried to take the latest OTA upgrade.
My bootloader was unlocked, and I temporarily un-rooted with Voodoo OTA Rootkeeper.
My phone then got stuck in Fastboot with the same errors:
Phone is LOCKED, Status Code:0
Downgraded secutiry version
Update gpt_main version failed
Failed to hab check for gpt_backup:0x35
failed to load GPT
CID read failure
Invalid CID status 0x69
No SP partition found
Fastboot reason: Invalid GPT
I can't get the phone out of fastboot with the error messages.
The Windows Utility returned <remote access failure>
RSD returned <getvar errors>
(I tried deleting the 2 <getvar> lines in the .xml files, but then RSD said phone returned failure "sbl1.mbn".
I downloaded & installed the adb package, and I got the phone to respond to fastboot commands, but it still ended up in Fastboot with the above list of errors.
Any suggestions?
Thanks
Click to expand...
Click to collapse
try this and let me know if it works please. its a test build to fix this issue.
http://www.mediafire.com/download/987490ykl14j4t8/DROID_RAZR_HD_Utility_1.3.gpt_fix.rar
thanks
Thanks
bweN diorD said:
try this and let me know if it works please. its a test build to fix this issue.
link
thanks
Click to expand...
Click to collapse
Thanks to you, it really work for me. My Motorola RAZR HD its now alive.
other possible solution that worked for me is
flashing this
http://sbf.droid-developers.org/download.php?device=6&file=119 (CLARO PR Jelly Bean)
Thanks!
suggestions for XT 925 please?
bweN diorD said:
try this and let me know if it works please. its a test build to fix this issue.
http://www.mediafire.com/download/987490ykl14j4t8/DROID_RAZR_HD_Utility_1.3.gpt_fix.rar
thanks
Click to expand...
Click to collapse
hbenz2008 said:
suggestions for XT 925 please?
Click to expand...
Click to collapse
replace the files in the tool with the files for your region. delete all the files for the 926 if any are left in there before flashing, so they arent flashed by mistake. also if any of your file names are not exactly the same as the current files inside, you will need to edit the batch file and fix the names.
if you dont want to do all that, you can get Mfastboot and flash your files to the phone manually one at a time starting with the partition file.
unable to flash partition signed
Hi.
I downloaded the SBF from sbf.droid-developers.org/phone.php?device=6 for my region(canada).
I proceeded to try to do universal through the RSD:
Filename: UNIVERSAL.xml
Creation Date: 11/23/2014 09:11:58
File size: 1589
Sofware Version: XT925_rcica-user 4.1.2 9.8.2Q-8-XT925_VQL-12.2 1356031681 release-keysVANQUISH_U_BP_100700.220.65.33P
For Phone Model: VANQUISH_U
I got failed flash process 1/18 flash partition "partition_signed"
Before this, my phone was working fine. Got the kitkat update pushed to me and after update it was working fine. I was using it until my battery ran out so i turned it off. Afterwards, it just got stuck at the motorola logo. I tried to update it with xt926 didn't realize that my phone is xt925. Anyways, i got the bootloader unlocked. Tried the above but failed.
Any help is appreciated!
Thanks!
what did you have on your phone before flashing it the first time? you can try reflash and edit xml before doing that, delete "getvar" line from it.
hbenz2008 said:
what did you have on your phone before flashing it the first time? you can try reflash and edit xml before doing that, delete "getvar" line from it.
Click to expand...
Click to collapse
I just got help from another thread. Followed it and it worked!!
http://forum.xda-developers.com/showthread.php?t=2760840&page=72
bweN diorD said:
replace the files in the tool with the files for your region. delete all the files for the 926 if any are left in there before flashing, so they arent flashed by mistake. also if any of your file names are not exactly the same as the current files inside, you will need to edit the batch file and fix the names.
if you dont want to do all that, you can get Mfastboot and flash your files to the phone manually one at a time starting with the partition file.
Click to expand...
Click to collapse
Originally had my RAZR HD firmware Telstra Australia, having unlocked bootloader I pass Retail Retail France and then to Brazil to upgrade to KitKat, where brick. I you explain how serious the replace files.
I have the Firmware Jelly bean in all regions, but are replaced with files jelly bean? and addresses of the partitions also be accommodated to those that are in the XML file jelly bean?
edwint290 said:
Originally had my RAZR HD firmware Telstra Australia, having unlocked bootloader I pass Retail Retail France and then to Brazil to upgrade to KitKat, where brick. I you explain how serious the replace files.
I have the Firmware Jelly bean in all regions, but are replaced with files jelly bean? and addresses of the partitions also be accommodated to those that are in the XML file jelly bean?
Click to expand...
Click to collapse
i dont really understand what you are asking.
you need to figure out which is the most recent partition table you have put on the phone successfully and flash that first. nothing will work correctly until you do. after you get a successful partition flash, you can flash whatever you want, just DO NOT flash the partition file again from any other version. old builds will work on the newer partition table.
So this morning i finally got the Nougat update. I downloaded it and waited for it to get verified. Got a pop-up saying install now, install later and don't install. I pressed install now waited and... Nothing happend. Went to software update in the settings and tried there, the same thing happened. Help is appreciated.
XenosRi said:
So this morning i finally got the Nougat update. I downloaded it and waited for it to get verified. Got a pop-up saying install now, install later and don't install. I pressed install now waited and... Nothing happend. Went to software update in the settings and tried there, the same thing happened. Help is appreciated.
Click to expand...
Click to collapse
i think you must install firmware first
look at here https://forum.xda-developers.com/showpost.php?p=71609608&postcount=3
XenosRi said:
So this morning i finally got the Nougat update. I downloaded it and waited for it to get verified. Got a pop-up saying install now, install later and don't install. I pressed install now waited and... Nothing happend. Went to software update in the settings and tried there, the same thing happened. Help is appreciated.
Click to expand...
Click to collapse
Do you have stock recovery or did you install TWRP? Have you ever mounted /system read/write?
To take an OTA (besides flashing it in TWRP and the firmware seperate) you need stock recovery and an untouched /system image.
Phildu91 said:
i think you must install firmware first
look at here https://forum.xda-developers.com/showpost.php?p=71609608&postcount=3
Click to expand...
Click to collapse
No, only to update from MM to N using a RUU. Not needed when updating with OTA.
JohnRogers23 said:
Do you have stock recovery or did you install TWRP? Have you ever mounted /system read/write?
To take an OTA (besides flashing it in TWRP and the firmware seperate) you need stock recovery and an untouched /system image.
Click to expand...
Click to collapse
I didn't find out why i couldn't install it, also i wasn't rooted, but i did a factory reset and that seemed to fix it! Now im on Nougat with no problems!
trying to update from Marshmallow 1.56.73.70(Orange France) to Nougat via OTA and i can't install...what must i do?
HTC One A9 non rooted , bootloader unlocked and S-On
Phildu91 said:
trying to update from Marshmallow 1.56.73.70(Orange France) to Nougat via OTA and i can't install...what must i do?
HTC One A9 non rooted , bootloader unlocked and S-On
Click to expand...
Click to collapse
Might want to restore your phone with the 1.56.73.70 ruu, after the ota should install fine since everything will be back to stock.
Trying to update my sprint a9 from 1.10.651.1 to nougat, what do i need to do? Im trying to system update via ota to 1.57 but always failed to verified my device?
My phone got supercid, s-off, bootloader unlocked, and non rooted. Can i convert it to global unlock?
imtawakkal said:
Trying to update my sprint a9 from 1.10.651.1 to nougat, what do i need to do? Im trying to system update via ota to 1.57 but always failed to verified my device?
My phone got supercid, s-off, bootloader unlocked, and non rooted. Can i convert it to global unlock?
Click to expand...
Click to collapse
I believe you need to put your CID back to the Sprint one, and make sure you have an untouched (not even mounted r/w) system partition with stock recovery.
JohnRogers23 said:
I believe you need to put your CID back to the Sprint one, and make sure you have an untouched (not even mounted r/w) system partition with stock recovery.
Click to expand...
Click to collapse
I alrd got cid back to sprint one, trying to update my phone with ruu, but always got error 132, and my phone already locked from the black screen bootloader, what did i do wrong from that?
imtawakkal said:
I alrd got cid back to sprint one, trying to update my phone with ruu, but always got error 132, and my phone already locked from the black screen bootloader, what did i do wrong from that?
Click to expand...
Click to collapse
Are you updating to Nougat from the RUU or are you trying to get back to stock to take an OTA? Those are two different but similar processes. Make sure you've got the right RUU for sprint and your version as well.
JohnRogers23 said:
Are you updating to Nougat from the RUU or are you trying to get back to stock to take an OTA? Those are two different but similar processes. Make sure you've got the right RUU for sprint and your version as well.
Click to expand...
Click to collapse
First i want to update to nougat via ruu, but always getting error when flashing the firmware.zip, then im trying to use ruu method to back to stock so i can use the ota, im alrd got the right ruu, but it seems it doesnt works
imtawakkal said:
First i want to update to nougat via ruu, but always getting error when flashing the firmware.zip, then im trying to use ruu method to back to stock so i can use the ota, im alrd got the right ruu, but it seems it doesnt works
Click to expand...
Click to collapse
Did you try flashing the entire RUU for the version you're on right now?
My phone is UK version, i was rooted but flashed the following RUU so that i could return to stock
HTC AERO UHL
1.56.91.71
2PQ9IMG_H[email protected]60122.4_43.05_F_release_471092_signed.zip
EE UK
modelid: 2PQ910000
cidnum: ORANG001
Link: https://www.androidfilehost.com/?fid=24457741883932916
md5: d9fb062162157e6d40adfaa057947f9e
Yesterday i finally recieved the OTA update for NOUGAT but when it downloaded and i pressed install, it loaded halfway in bootloader and eventually failed ending up with triangle and exclamation sign.
I am unrooted and bootloader relocked.
Please help, i have already waited months for this update
Please help anyone!!
flash stock recovery or RUU.
I have similar problem of receiving an error (signarure error:132) while trying update my device by using RUU side load, i have the right RUU for my device but i still receive errors please help me with this
---------- Post added at 06:25 PM ---------- Previous post was at 06:21 PM ----------
I have similar problem of receiving an error (signarure error:132) while trying update my device by using RUU side load, i have the right RUU for my device but i still receive errors please help me with this or if there is any chance i can flash stock recovery please tell me how b'se my device seems to have a modified system and recovery may be this is the problem preventing me from update my device by using RUU side load
Hello.
I need a help with my Honor 8, it's been bricked and I honestly don't know if there is much to do in my current situation.
So the phone has locked bootloader and stock recovery.
Fastboot always returns 'Command not allowed'
What exactly happened:
I was running Stock ROM, rooted, TWRP Recovery with unlocked bootloader.
An official OTA update popped-up on my phone, I was in a rush and I missclicked (don't even ask lol) and the update started installing, I knew I'm screwed.
So I was about to play with fastboot, but it always returned 'Command not allowed'.
And probably the worst mistake happened a few minutes ago (6:00 am trying to fix it half a sleep), I was reading some posts about the dload method, >>FASTFORWARD I installed an official update using the dload method and locked my bootloader by doing this.
QUICK SUMMARY:
So I'm stuck on a bootloop.
The 3 button combo works.
Stock Recovery works as well.
Fastboot does NOT work. (I tried flashing, unlocking, temp-booting.. but nothing)
adb always returns error:
Code:
device unauthorized.
This adb server's $ADB_VENDOR_KEYS is not set
Try 'adb kill-server' if that seems wrong.
Otherwise check for a confirmation dialog on your device.
Is there ANYTHING I can do in my current situation? :crying:
Thanks in advance for any help.
Have a nice day.
Hello, as long as you have an official recovery, a proper BOOT.IMG and the dload method is working there is still a chance( i hope), the only thing you need to know is that if the firmware is the wrong for your phone it will deny it. It means that is if you try to install an android 6.0 based stock ROM over a 7.0 ROM , it will say software upgrade failed or something like that.
You need to know under which Android version you were and install the same or maybe a more recent one but not to far away from your actual ROM, try the next one. You can also try to downgrade USING a rollback package that you can download on honor official site. Make sure that's the the correct file for your phone.
Hope you'll make it bro, let me know how the situation evolve
(sorry for any language mistake, english isn't my native language.)
Rayan19997 said:
Hello, as long as you have an official recovery, a proper BOOT.IMG and the dload method is working there is still a chance( i hope), the only thing you need to know is that if the firmware is the wrong for your phone it will deny it. It means that is if you try to install an android 6.0 based stock ROM over a 7.0 ROM , it will say software upgrade failed or something like that.
You need to know under which Android version you were and install the same or maybe a more recent one but not to far away from your actual ROM, try the next one. You can also try to downgrade USING a rollback package that you can download on honor official site. Make sure that's the the correct file for your phone.
Hope you'll make it bro, let me know how the situation evolve
(sorry for any language mistake, english isn't my native language.)
Click to expand...
Click to collapse
Woohoo, after a few tries & factory resets I was able to boot my phone again using the dload method :victory: The TWRP recovery has vanished and it seems like there is no sign of root(?) either, I'm gonna redo everything again, thanks so much for your help, you saved me bro <3 Have a wonderful day.
I am really glad that you get your phone back on track ! And yh the dload method bring you to stock everything, stock recovery,stock system etc etc.
Have a nice day
crepnik said:
Woohoo, after a few tries & factory resets I was able to boot my phone again using the dload method :victory: The TWRP recovery has vanished and it seems like there is no sign of root(?) either, I'm gonna redo everything again, thanks so much for your help, you saved me bro <3 Have a wonderful day.
Click to expand...
Click to collapse
Hi Crepnik,
Even I am facing the same issue. Can you please tell me which ROM did you download.
My phone was update to Nougat EMUI 5.0
Thanks
[email protected] said:
Hi Crepnik,
Even I am facing the same issue. Can you please tell me which ROM did you download.
My phone was update to Nougat EMUI 5.0
Thanks
Click to expand...
Click to collapse
Try to flash the rollback package and then an EMUI 4.x ROM. They're both available on honor official site
Rayan19997 said:
Try to flash the rollback package and then an EMUI 4.x ROM. They're both available on honor official site
Click to expand...
Click to collapse
Hi Ryan,
Thank you so much for responding.
I could see two ROM in the official site http://www.hihonor.com/in/support/
HONOR 8 Firmware (FRD-L02, C675B130CUSTC675D002, India)
HONOR 8 Firmware (FRD-L02, Android 6.0, EMUI 4.1, C675B160, India Channel)
I tried with both the ROMs but no luck
I placed the update.APP file inside sdcard but the update stops at 5% showing that it has failed.
I also tried flashing the recovery.IMG in fastboot mode.
I have lost all the hopes in my new phone
In the rescue mode it says UNLOCKED.
Please guide me with some detailed steps.
Thanks
Flash the stock recovery of the ROM that was previously installed on your phone , then with dload method flash the rollback package downloaded from honor site , and finally flash one of the two ROM, it may resolve your issue because the phone won't accept a lower firmware without flashing the rollback package first. As long as you can use dload method it should be fine.
If it doesn't work try to flash boot.img , recovery.img, cust.img, vendor.img and system.img extracted from a clean firmware downloaded on honor official site
Let us know how the situation evolve
Hello y'all, i issued a problem tomorrow by rooting BLN-L21C432, i unlocked bootloader with no problem, when was time for flashing recovery, i flashed the boot into the recovery and issued a problem in the dev options and security. Cuz of that, i can't access to adb, hisuite hdb to backup, and can't install extern apps without autorizations.
I tried all night long to resolve but no way, add to that the fact i've got a very very low connexion so 3-4h to load an update.zip.
So i downloaded b370, no way i can't use the dload method, fail at 5%. Same issue with b369. Tried to flash manually system boot and recovery by extracting update.app, no result, it's same. Tried to Unbrick via multi-tool, i use it on honor 7, but there's no cust image in update.app.
Build number is normal, C432B365.
I don't know what to do now, it's 10 hours i'm losing my minds with that phone. Please heeeelp :crying:
From which firmware ? Is it good if i flash boot and recovery from B360 ?
Edit : Actually the phone is in B365, it would be better if i try to dload from it right ?
I read that unlocked bootloader could block an update, is that true ?
Rommco05 said:
No u need to flash boot and recovery from actually firmware. After when u flash right boot and recovery (from B365). Now u try installing this firmware us it B360. http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v82485/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...-L21_hw_eu/update_data_full_BLN-L21_hw_eu.zip
You can use dload method or over Firmware Finder
Click to expand...
Click to collapse
I'm gonna download it and come back later, thank you very much
Hi guys I came over the problem by only flashing the original boot that was B365, it was si obvious, thanks to you for helping me bro, real thank ?
Hi all,
I would like to ask how to unlock my bootloader while stuck in download mode?
After an unsuccessful flash of a stock firmware, I was stuck in download mode on my Samsung device and can't install any FW.
While in download mode I get the following message:
Samsung Custom binary (System) blocked by oem lock
Is there any possibility to unlock the bootloader?
Thank you
LieLaw
LieLaw said:
Hi all,
I would like to ask how to unlock my bootloader while stuck in download mode?
After an unsuccessful flash of a stock firmware, I was stuck in download mode on my Samsung device and can't install any FW.
While in download mode I get the following message:
Samsung Custom binary (System) blocked by oem lock
Is there any possibility to unlock the bootloader?
Thank you
LieLaw
Click to expand...
Click to collapse
Are you sure you flash the correct firmware version for your model?
Give more details, because no one can help you if you don't help yourself.
ze7zez said:
Are you sure you flash the correct firmware version for your model?
Give more details, because no one can help you if you don't help yourself.
Click to expand...
Click to collapse
Thank you for the reply. I’ll try to give all information I can.
My version on the phone was:
G887NKSU2CTI2 from the Provider KTC.
My phone was kind of broken (couldn’t update with an existing update possibility and apps closed by itself even after clean install).
So I wanted to install manually with Odin the latest stock firmware from the provider KTC: G887NKSU2CVH2.
This should be actually no problem, but the flash failed and now I can’t do anything with the phone. The only thing I can find on the internet is to open the bootloader, but I don’t know how I can do this.
I’ve uploaded a picture of how it looks like now. It’s translated because original text was korean.