My Karbonn titanium octane bricked while flashing official rom by sp flash tool due to restarting my pc in middle of flashing process and when i tried to do it again computer does not support my device for long time its connect and disconnect. Help me please...
Related
Hi all,
I was using karbonn a11 rooted and with custom rom Lewa OS. Yesterday I tried to upgrade this and by mistake I selected another rom from the SD-CARD and when it finished installation asked for reboot and when I rebooted it could not turned on. It only vibrates when I press power button and continuously vibrates unless I remove the battery. Please explain me how to recover this phone. Thanks in advance.
Prashant
Try to Flash stock rom from flasing tool from pc.. may b it will work
so,
as i am new to the world of droid devs..i made a mistake...
just a min before i tried to tweak my old karbonn a1 star mtk6575 jb and stock <3e> recovery
i went to /etc/fonts
and replaced its default roboto.ttf with another font file and rebooted..
and now phone is not moving further from boot img/animation..
is it bricked or has a boot loop??
thought to try following methods::
> factory wipe..
>edit nand backup
>again flash stock rom (my phone runs stock jb but jb is isnt availble on net)
cant use pc as my phone never connects any pc..
plz plz plz plz help me... :crying:
thnx for ur help...
That's a boot loop and not brick. Factory reset won't help since, you edited system folder.
Please review [Stock ROM BACKUP] Karbonn A1+ Backup
You might be better off to restore that nandroid.
I was trying to flash AICP rom in my karbonn titanium octane without any recovery.......... I flashed the rom using rashr but it took me to a black screen. I turned off my mobile and rebooted it and it got stuck in the boot animation of AICP rom........... Now what should i DO to bring it back? :crying: And in-built recovery too not working........
I had the same problem
Just try to port carliv touch recovery and flas it using sp tools
if you have any doubt mail me [email protected]
How to unbrick my Karbonn titanium octane
My Karbonn titanium octane bricked while flashing official rom by sp flash tool due to restarting my pc in middle of flashing process and when i tried to do it again computer does not support my device for long time its connect and disconnect. Help me please...:crying:
Karbonn sparkle v after trying cyanogen mod 13 nightlies got hard bricked and after that it is not switching on, there is no sign of life in the phone as the phone even doesnot goes in recovery mode and no bootlogo plz help me to clear this situation.
See if you can flash the firmware on it http://forum.xda-developers.com/sparkle-v/general/stock-rom-marshmallow-t3302087
Addhyan said:
Karbonn sparkle v after trying cyanogen mod 13 nightlies got hard bricked and after that it is not switching on, there is no sign of life in the phone as the phone even doesnot goes in recovery mode and no bootlogo plz help me to clear this situation.
Click to expand...
Click to collapse
Try to flash the stock firmware though SP flash tools.(if your device is detecting in PC )
How to root6.0marsmailow
Similar issue with Karbonn Sparkle V. Please Help!
AdityaAg said:
Try to flash the stock firmware though SP flash tools.(if your device is detecting in PC )
Click to expand...
Click to collapse
Hi Aditya, I've accidentally formatted all the partition on my sparkle V and now only a bootloop with KARBONN logo. I am able to go to fastboot but not to recovery. I tried flashing each recovery (CWM, TWRP, PHILZ) through fastboot and all the time the flashing went successful, but not at all going to recovery mood. I also tried connecting the phone with preloader VCOM driver to flash with SP tool, but my phone is no more detecting in VCOM mode as it was earlier. Any suggestion - if I can flash the ROM in fastboot mode or with the help of any other tool.
Please help,
Deb
D-expert said:
Hi Aditya, I've accidentally formatted all the partition on my sparkle V and now only a bootloop with KARBONN logo. I am able to go to fastboot but not to recovery. I tried flashing each recovery (CWM, TWRP, PHILZ) through fastboot and all the time the flashing went successful, but not at all going to recovery mood. I also tried connecting the phone with preloader VCOM driver to flash with SP tool, but my phone is no more detecting in VCOM mode as it was earlier. Any suggestion - if I can flash the ROM in fastboot mode or with the help of any other tool.
Please help,
Deb
Click to expand...
Click to collapse
Try flashing the rom in fastboot mode .
Hi Friends,
I have a Micromax AQ4501 which is bricked now. So I am expecting a solution.
All which was Happened is as follows:
1. I was unable to turn the WiFi and WiFi hotspot on so I did a system restore but Nothing worked out.
2. I tried to Flash the stock rom through SP tool version 3.1344.214 and It was completed successfully.
3. Even after Flashing, It did not turn on and then no boot logo no charging but still It was being detected by Windows.
4. I had successfully flashed it many times through Download mode and firmware Upgrade mode, even using the latest Sp tool and Even using two versions of its official firmwares. (Micromax_AQ4501_V3_23.03.15 and Micromax_AQ4501_V9_29.08.14)
But Still It was not turning on and Still Windows can detect it.
So Now It's not Hardware bricked but still can't see the boot logo and it's not even charging. So If you guys have a solution.... then DO share ASAP. And help Me.
Thank You
I flashed the Karbonn Sparkle V's firmware using SP flash tool and It worked...