Hey
I have got the following unit installed:
Modellnummer: A-MEDIA AUTO (1024x600)
Android-Version: 6.0.1.
Sicherheitspatch: 1. Juni 2016
Baseband: SF3GR_M-26.3_cpeg_rk-r2p_bc2-20160629_111639
Kernel: 3.14.0x [email protected] #9
Build: sofia3gr_car_64-userdebug 6.0.1 MMB29M eng.hct.20170515.155328 releas-keys
MCU-Version: MTCD_LM_v2.441
CPU: Genuine Intel(R) CPU @1.2Ghz (x4)
Speicher 1924 MB
I bought it second hand and according to the seller it is a erisin 3811, which actually should be based on a PX30 and not a Sofia.
But nevermind.
Whenever I connect my Android phone to this device using the B2DP-App, the sound stopps for miliseconds every half minute... Bluetooth sound when calling is flawless, it's just music or podcasts via this app.
Any idea how to improve this?
Thanks!
Related
However, if I use the sound balance app and move it anywhere (then back to center), the left channel returns.
Basically, it's not an issue with the left speaker or the cabling.
This is what About says for my Dicola CHS7047X:
Manufacturer: rockchip
Model number: PX5
Android version: 8.0.0
Android security patch level: October 5, 2017
Kernel version: 4.4.93+; [email protected] #121; Fri Jan 26 10:41:07 CST 2018
Build number: px5-userdebug 8.0.0 OPG5.170623.007 eng.hct.20180126.113204 test-keys
MCU version: MTCE_CHS_V2.76_1; Dec 20 2017 15:49:46
CPU: 8 core 64-bit CPU Coretex-A53 @ 1.5G
Any ideas?
I sometimes have the same problem. Does anyone have a solution?
OMG.. yes! I thought I was the only one with this issue.
Bugged me for a long while. I do have a workaround which prevents this issues from cropping up (works for me at least).
If your fader is set to dead centre, this issue does not occur.
Since I wanna run only my front speakers, I have disconnected my rear speakers. Try it, lemme know how it goes.
Edit: I am using Daisata, PX5 Android 6.0. Updating to latest MCU didnt help.
Good morning.
I have an SYGAV /Dasaito Android 9 head unit...
Model: PX6 (1024x600)
Build: rk3399-userdebug 9 PQ2A.190305.002 20190611.144108 test-keys
Kernel: 4.4167 #320
Calls and other audio sources are muted when the car is in reverse and the backup camera is activated.
How can I change this default behavior so that at least the calls aren't muted?
Thanks in advance!
Look in your factory settings on the last tab, disable reverse volume and it should work fine.
Hi,
I was wondering if I could get some help with my issue. I bought an Erisin ES8049U head unit that I am trying to connect to my cars after market engine management system via Bluetooth. The head unit discovers the engine management system but it's quite troublesome to connect to it. Sometimes it connects, sometimes it doesnt. The Bluetooth connection to the cars engine management unit works fine from my Samsung mobile, so the problem is in the Erisin head unit.
Also when I finally get it to connect, no data comes through to the engine management system, it's like its not even connected and sometimes it flashes connected/disconnected.
Here are the info on the system:
PX5
Android 9
Build: rk3368-userdebug 9PQ2A. 190305.002 20191113.183229 test-keys
Kernel: 4.4.167
MCU: MTCE_LM_V3.43_1 / DEC 17.2019
CPU: Octa-core Cortex-A53 @ 1.5G
BT chip that has been selected in the system by default is: SD-8350
I've read some of the BT connectivity issues and they mostly have had different BT chips installed, at least originally. Any idea which chip I could test from the list, or is there a MCU that would fix connectivity issues? Or any other things I could do?
2JZHX60 said:
Hi,
I was wondering if I could get some help with my issue. I bought an Erisin ES8049U head unit that I am trying to connect to my cars after market engine management system via Bluetooth. The head unit discovers the engine management system but it's quite troublesome to connect to it. Sometimes it connects, sometimes it doesnt. The Bluetooth connection to the cars engine management unit works fine from my Samsung mobile, so the problem is in the Erisin head unit.
Also when I finally get it to connect, no data comes through to the engine management system, it's like its not even connected and sometimes it flashes connected/disconnected.
Here are the info on the system:
PX5
Android 9
Build: rk3368-userdebug 9PQ2A. 190305.002 20191113.183229 test-keys
Kernel: 4.4.167
MCU: MTCE_LM_V3.43_1 / DEC 17.2019
CPU: Octa-core Cortex-A53 @ 1.5G
BT chip that has been selected in the system by default is: SD-8350
I've read some of the BT connectivity issues and they mostly have had different BT chips installed, at least originally. Any idea which chip I could test from the list, or is there a MCU that would fix connectivity issues? Or any other things I could do?
Click to expand...
Click to collapse
OK, I got it to show the data from the engine managament unit when I disabled Wireless and after that it started connecting. But if I restart the car, it doesnt want to connect to the application. With my phone it works flawlessly. I wonder if it's an application error or something to do with the head unit.
HI all, I have a problem with Bluetooth on the following A-MEDIA AUTO head unit:
Model
PX6(1280x720)
Android version 10
Build number rk3399-userdebug 10 QQ2A.200305.004.A1 eng.hct.20210902163038 test-keys
Kernel version
4.19_111+
#158 Wed Aug 11 15:57:41 CST 2021
MCU version
MTCE_CHS_V3.76_1
May 13 2021 15:42:50
CPU
Dual-core Cortex-A72 @ 1.8G
Quad-core Cortex-A53 @ 1.5G
Memory
3841MB
I know Bluetooth problems appear to be legion on these Chinese head units, but maybe someone can help me sort this out. Now there is no problem pairing any device with a PIN: mobile phones and OBD2 dongles pair up just fine. But I have a lot of Bluetooth devices and applications that communicate directly - no pairing required - such as battery monitors, BMSs, mobile phone repeater units. These devices/applications used to work on my old Android 9 head unit (different chipset entirely), but now on this new Rockchip 3399 Android 10 unit, none of them can communicate at all.
I'm not sure if it's an Android 10 problem, or (more likely I suspect) a broken Bluetooth implementation in the MCU. Another problem is that audio pass-through from the mobile phone doesn't work at all, even though all other phone operations work as they should.
The Bluetooth driver setting in the unit is set to WQ_RF210. I've tried all of the other settings for fun, but of course there was no improvement.
Is anyone able to shed any light on this?
LC76 said:
HI all, I have a problem with Bluetooth on the following A-MEDIA AUTO head unit:
Model
PX6(1280x720)
Android version 10
Build number rk3399-userdebug 10 QQ2A.200305.004.A1 eng.hct.20210902163038 test-keys
Kernel version
4.19_111+
#158 Wed Aug 11 15:57:41 CST 2021
MCU version
MTCE_CHS_V3.76_1
May 13 2021 15:42:50
CPU
Dual-core Cortex-A72 @ 1.8G
Quad-core Cortex-A53 @ 1.5G
Memory
3841MB
I know Bluetooth problems appear to be legion on these Chinese head units, but maybe someone can help me sort this out. Now there is no problem pairing any device with a PIN: mobile phones and OBD2 dongles pair up just fine. But I have a lot of Bluetooth devices and applications that communicate directly - no pairing required - such as battery monitors, BMSs, mobile phone repeater units. These devices/applications used to work on my old Android 9 head unit (different chipset entirely), but now on this new Rockchip 3399 Android 10 unit, none of them can communicate at all.
I'm not sure if it's an Android 10 problem, or (more likely I suspect) a broken Bluetooth implementation in the MCU. Another problem is that audio pass-through from the mobile phone doesn't work at all, even though all other phone operations work as they should.
The Bluetooth driver setting in the unit is set to WQ_RF210. I've tried all of the other settings for fun, but of course there was no improvement.
Is anyone able to shed any light on this?
Click to expand...
Click to collapse
Did you ever find a solution to this?
brody6104 said:
Did you ever find a solution to this?
Click to expand...
Click to collapse
Not a single sausage.
Mtcd forums
Hello, I have an IDOING ROCKCHIP PX6 radio ( https://es.aliexpress.com/item/1005001556699902.html?spm=a2g0o.order_list . order_ list_main.74.21ef194dVBJqix& gatewayAdapt=glo2esp )
I am having problems with the ZLINK version 5.3 app that when I connect to my android phone wirelessly it freezes the image every 50 seconds and then refreshes again. Sometimes it doesn't update right away and I have to go back to the start menu and open the android auto app again.
Complaining to idoing via aliexpress I no longer have support and a solution on their side since I have to send the radio to China and the cost is higher than the radio, could you help me solve my problem
I am afraid of making a bad update and the radio will go black without recovering it
if you can help me
build number
rk3399-userdebud 11 RQ3A.210705.001 eng.hct2.20230206.105252 release-keys
kernel version
4.19.193
#154 Fri Dec 2 15:36:13 CST 2022
MCU version
MTCH_PSD V3.80_1
JULY 22 2021
Яндекс
Найдётся всё
disk.yandex.ru
Try using unit without using the known buggy Android auto emulator, alternatively you probably want consider buying an official Android-auto head unit
Android Auto Compatibility | Android
Android Auto works with hundreds of vehicles and aftermarket stereos. Check your compatibility here.
www.android.com