Related
Due to mounting issues with the current root solution on Android 10, Adaway doesn't seem to be able to either write to the hosts file or modify it. Has anyone found a solution?
Thanks....
floepie said:
Due to mounting issues with the current root solution on Android 10, Adaway doesn't seem to be able to either write to the hosts file or modify it. Has anyone found a solution?
Thanks....
Click to expand...
Click to collapse
Really? Mine is working exactly as in Pie. I am rooted with magisk 19.3 and have systemless hosts module installed. Adaway has no issue writing to this hosts file.
clcdev said:
Really? Mine is working exactly as in Pie. I am rooted with magisk 19.3 and have systemless hosts module installed. Adaway has no issue writing to this hosts file.
Click to expand...
Click to collapse
Thanks! Got it working. There is no module any longer, as it is a setting in the app itself - a setting which you just tap with no dialog, only a "toasted" confirmation.
floepie said:
Thanks! Got it working. There is no module any longer, as it is a setting in the app itself - a setting which you just tap with no dialog, only a "toasted" confirmation.
Click to expand...
Click to collapse
When I click that checkbox, I got the confirmation on the bottom that says Adaway was granted Superuser rights, but the box doesn't actually check, and nothing changes. Am I missing something stupid?
Go to setting in magisk and enable this module, restart, and then adaway should work.
I've tried that. Got all messages showing up that it's fine. Rebooted and still see ads in certain pages.
Unfortunately best solution thus far is the AdGuard app but that's VPN and draining juice.
wbgenetic said:
I've tried that. Got all messages showing up that it's fine. Rebooted and still see ads in certain pages.
Unfortunately best solution thus far is the AdGuard app but that's VPN and draining juice.
Click to expand...
Click to collapse
Just to make sure; you also checked the systemless mode in AdAway?
(after reboot to enable magisk systemless module)
If it blocks most ads you may want to add another hosts source.
Mother_Teresa said:
Just to make sure; you also checked the systemless mode in AdAway?
(after reboot to enable magisk systemless module)
If it blocks most ads you may want to add another hosts source.
Click to expand...
Click to collapse
I have the same problem. Pixel 2 XL, Android 10. Magisk works, safetynet works. Adaway doesn't. The systemless hosts module in magisk shows as enabled, the tick box on adaway doesn't work (when I tap it nothing happens). When I select enable adblocking in Adaway it starts building the hosts file and ends with an error message "remount failed. Remounting the partition as read/write failed!".
airmark said:
I have the same problem. Pixel 2 XL, Android 10. Magisk works, safetynet works. Adaway doesn't. The systemless hosts module in magisk shows as enabled, the tick box on adaway doesn't work (when I tap it nothing happens). When I select enable adblocking in Adaway it starts building the hosts file and ends with an error message "remount failed. Remounting the partition as read/write failed!".
Click to expand...
Click to collapse
Are you using the latest AdAway? Maybe you need to update the app itself.
Hmmm can I add other stuff to the hosts file? Sort of like easy lists for different languages like adblocker on chrome for PC? This might do the trick if possible.
hunfatal said:
Are you using the latest AdAway? Maybe you need to update the app itself.
Click to expand...
Click to collapse
Version 4.2.9. F-droid says it's the latest
wbgenetic said:
Hmmm can I add other stuff to the hosts file? Sort of like easy lists for different languages like adblocker on chrome for PC? This might do the trick if possible.
Click to expand...
Click to collapse
Yes, checks settings
So most ads get blocked but not all?
adaway forum to get latest version and gossip.
I also had issues getting AdAway running on Android 10, but managed to get it going eventually. I had the same issues as the others: "Enable systemless mode" checkbox was "toasting" but not checking in AdAway, despite tapping the "Systemless hosts" item in Magisk and getting successful-looking toast notifications.
Steps that worked for me:
Take note of any settings you have in AdAway, as they are about to go away
Completely uninstall AdAway. This means Force Stop, Clear Cache, Clear Data, then Uninstall
Reboot
Open Magisk Manager --> Settings --> Tab the "Systemless hosts" item. You should get the toast notification.
Install the latest version of AdAway (v4.2.9 as of now, as others have mentioned)
Open AdAway --> Preferences. With luck, you'll see that Enable systemless mode is checked already (pretty sure mine was). If not...maybe try checking it now.
AdAway should work now. Make sure to poke around and add back any customizations you used to have.
Hope that helps!
I stopped using adaway in favor of DNS66 for about two years now. Might be worth a shot if you're still having issues with Adaway
https://f-droid.org/en/packages/org.jak_linux.dns66/
HypromanGT said:
I also had issues getting AdAway running on Android 10, but managed to get it going eventually. I had the same issues as the others: "Enable systemless mode" checkbox was "toasting" but not checking in AdAway, despite tapping the "Systemless hosts" item in Magisk and getting successful-looking toast notifications.
Steps that worked for me:
Take note of any settings you have in AdAway, as they are about to go away
Completely uninstall AdAway. This means Force Stop, Clear Cache, Clear Data, then Uninstall
Reboot
Open Magisk Manager --> Settings --> Tab the "Systemless hosts" item. You should get the toast notification.
Install the latest version of AdAway (v4.2.9 as of now, as others have mentioned)
Open AdAway --> Preferences. With luck, you'll see that Enable systemless mode is checked already (pretty sure mine was). If not...maybe try checking it now.
AdAway should work now. Make sure to poke around and add back any customizations you used to have.
Hope that helps!
Click to expand...
Click to collapse
FIXED : Did same twice didn't work untill i gave permission of storage to the app before launching it
driss.sadok said:
FIXED : Did same twice didn't work untill i gave permission of storage to the app before launching it
Click to expand...
Click to collapse
I have done step by step and doesnt work, i've got android 9, but it doesnt metter still cant make it work. Root works, hosts i've checked with file menager is also full, updated sources. Checked with 3 browsers and i still see alot of ads...
smile20 said:
I have done step by step and doesnt work, i've got android 9, but it doesnt metter still cant make it work. Root works, hosts i've checked with file menager is also full, updated sources. Checked with 3 browsers and i still see alot of ads...
Click to expand...
Click to collapse
have you enabled systemless hosts in magisk?
gvsukids said:
have you enabled systemless hosts in magisk?
Click to expand...
Click to collapse
Yes, in magisk manager, restarted system, then installed adaway, gave permission to storage before first turn on, then checked systemless host setting in Adaway menu, but it was already on, downloaded sources, restarted system and now it supposed to wotk, but it doesn....There was just one reason i've rooted system, and it doesnt work...
Try enabling the hosts before installing adaway. Are you using the fdroid version?
gvsukids said:
Try enabling the hosts before installing adaway. Are you using the fdroid version?
Click to expand...
Click to collapse
This is how i've done . First enabled in magisk manager, then installed Adaway. I've downloaded direct Adaway apk from frdroid site.
I upgraded to Android 11 (Oct 2020 stable) a couple of days ago. I have never been more disappointed in an Android release. My phone freezes constantly and the only way out is a hard reboot. Sometimes it takes 5-6 reboots before the phone behaves normally. There are lots of threads on Google forums where people are facing the same issue on different pixel models, so it looks like an issue with the OS and not the phone. I would like to go back to Android 10 and preferably save my data. I have a rooted phone. Can I follow the same steps that I performed to upgrade - https://www.youtube.com/watch?v=fYib1WNr2I8?? Thanks!
slvrhwk said:
I upgraded to Android 11 (Oct 2020 stable) a couple of days ago. I have never been more disappointed in an Android release. My phone freezes constantly and the only way out is a hard reboot. Sometimes it takes 5-6 reboots before the phone behaves normally. There are lots of threads on Google forums where people are facing the same issue on different pixel models, so it looks like an issue with the OS and not the phone. I would like to go back to Android 10 and preferably save my data. I have a rooted phone. Can I follow the same steps that I performed to upgrade - https://www.youtube.com/watch?v=fYib1WNr2I8?? Thanks!
Click to expand...
Click to collapse
No, downgrading requires a wipe (factory image with -w intact).
slvrhwk said:
I upgraded to Android 11 (Oct 2020 stable) a couple of days ago. I have never been more disappointed in an Android release. My phone freezes constantly and the only way out is a hard reboot. Sometimes it takes 5-6 reboots before the phone behaves normally. There are lots of threads on Google forums where people are facing the same issue on different pixel models, so it looks like an issue with the OS and not the phone. I would like to go back to Android 10 and preferably save my data. I have a rooted phone. Can I follow the same steps that I performed to upgrade -
?? Thanks!
Click to expand...
Click to collapse
I am assuming you are rooted? Are you using systemless hosts module and Adaway? That causes what you are describing...there is a bug in one of them.
Uninstall Adaway and the Systemless Hosts module if so.
TonikJDK said:
I am assuming you are rooted? Are you using systemless hosts module and Adaway? That causes what you are describing...there is a bug in one of them.
Uninstall Adaway and the Systemless Hosts module if so.
Click to expand...
Click to collapse
Yes, I'm using Adaway and Systemless Hosts module. Cool, I'll delete it. Any other way to run adblock currently?
Thanks a ton, btw! This really helps!
Edit: I uninstalled Adaway. But I'm running the canary version of Magisk and when I go to settings, there's no option to delete Systemless Hosts module. There is a button "Systemless Hosts" and when I click on it, it says 'Added systemless module for adblock apps'. How do I delete it?
slvrhwk said:
Yes, I'm using Adaway and Systemless Hosts module. Cool, I'll delete it. Any other way to run adblock currently?
Thanks a ton, btw! This really helps!
Click to expand...
Click to collapse
Check out this thread.
https://forum.xda-developers.com/pixel-3-xl/help/rooted-pixel-3-xl-frequently-freezes-t4164793/page5
slvrhwk said:
Yes, I'm using Adaway and Systemless Hosts module. Cool, I'll delete it. Any other way to run adblock currently?
Thanks a ton, btw! This really helps!
Edit: I uninstalled Adaway. But I'm running the canary version of Magisk and when I go to settings, there's no option to delete Systemless Hosts module. There is a button "Systemless Hosts" and when I click on it, it says 'Added systemless module for adblock apps'. How do I delete it?
Click to expand...
Click to collapse
One way to delete it would be to create a file called remove in the systemless host directory in /data/adb/modules/, and reboot. I don't have that module, so I don't know what the directory name is.
An alternative to AdBlock is Settings, Network & Internet, Private DNS. Set Private DNS provider hostname to dns.adguard.com.
Hey guys
I've been using Microsoft Teams on my on my rooted phone using Magisk Hide for a while and it suddenly stopped working (saying my phone was rooted).
I then updated Magisk Manager & Magisk (22.0) but then Safetynet didn't pass anymore. I fixed it using safetynet-fix module as suggested here.
However since then I can't manage to use Teams, it still detects my phone is rooted. Magisk Hide is activated on the Teams app and companyportal app
Any help ?
Thanks
Mouchoir said:
Hey guys
I've been using Microsoft Teams on my on my rooted phone using Magisk Hide for a while and it suddenly stopped working (saying my phone was rooted).
I then updated Magisk Manager & Magisk (22.0) but then Safetynet didn't pass anymore. I fixed it using safetynet-fix module as suggested here.
However since then I can't manage to use Teams, it still detects my phone is rooted. Magisk Hide is activated on the Teams app and companyportal app
Any help ?
Thanks
Click to expand...
Click to collapse
Which rom?
Did you flash Magisk before the first boot?
NOSS8 said:
Which rom?
Did you flash Magisk before the first boot?
Click to expand...
Click to collapse
Hello,
MIUI 12.0.2 is my ROM. It was the same when Teams used to work.
And no I didn't flash Magisk before first boot
Mouchoir said:
Hello,
MIUI 12.0.2 is my ROM. It was the same when Teams used to work.
And no I didn't flash Magisk before first boot
Click to expand...
Click to collapse
Maybe try an older version of Magisk(Miui 12.02 android 10).
Uninstall your actually version.
Mouchoir said:
Hey guys
I've been using Microsoft Teams on my on my rooted phone using Magisk Hide for a while and it suddenly stopped working (saying my phone was rooted).
I then updated Magisk Manager & Magisk (22.0) but then Safetynet didn't pass anymore. I fixed it using safetynet-fix module as suggested here.
However since then I can't manage to use Teams, it still detects my phone is rooted. Magisk Hide is activated on the Teams app and companyportal app
Any help ?
Thanks
Click to expand...
Click to collapse
hey man, had the same problem and solved it yesterday after a lot of tries
I'm using the Magisk v21.2.zip and the Magisk 22 (manager). I uninstalled the Teams and the Company Portal app, made Magisk appear with another name (you can do it in the settings, I just put "Manager"), installed those apps again, used Magisk Hide and then it finally worked
math.rangel said:
hey man, had the same problem and solved it yesterday after a lot of tries
I'm using the Magisk v21.2.zip and the Magisk 22 (manager). I uninstalled the Teams and the Company Portal app, made Magisk appear with another name (you can do it in the settings, I just put "Manager"), installed those apps again, used Magisk Hide and then it finally worked
Click to expand...
Click to collapse
That worked for me thanks a lot !
If anyone needs :
Uninstall Magisk using the Manager
Uninstall Teams & Company Portal
Download Magisk 21.2 on the official Github
Flash it using TWRP
Install the Magisk manager
Rename it in the app settings
Install Teams & Company Portal and use Magisk Hide
Good afternoon,
Excellent tip! I was using version 22.0 and it didn't work.
I tested with Magisk 20.4, it also works.
Thanks
Mouchoir said:
That worked for me thanks a lot !
If anyone needs :
Uninstall Magisk using the Manager
Uninstall Teams & Company Portal
Download Magisk 21.2 on the official Github
Flash it using TWRP
Install the Magisk manager
Rename it in the app settings
Install Teams & Company Portal and use Magisk Hide
Click to expand...
Click to collapse
Tested on 21.1 debug version, working perfectly.
For me it didn't work so I tried older version of Portal ...teams then moan that it's not the latest, so I downloaded an older teams version too! ...now it works
So older portal version and teams and with the above mentioned ....it works
evronetwork said:
For me it didn't work so I tried older version of Portal ...teams then moan that it's not the latest, so I downloaded an older teams version too! ...now it works
So older portal version and teams and with the above mentioned ....it works
Click to expand...
Click to collapse
What versions did you installed for Teams and for Portal?
kbs23 said:
What versions did you installed for Teams and for Portal?
Click to expand...
Click to collapse
Well after like a day or two it just moans about root access and you still have to do uninstall both and reinstall - So it's either that or remove root - It seemed to work but it's not for long 2 days of usage tops
For me, I managed to fix it somehow by uninstalling some root apps (TitaniumBackup, Swift Backup, Tasker, etc) and deleting my twrp folder in my root storage and removing CP/Teams and then restarting and then re-installing CP/Teams and then unchecking MagiskHide on these apps (it was already-reselected) and then re-enabling MagiskHide. I think ultimately it was this last step (re-toggling MagiskHide on/off) that fixed it. Previously, after re-installing CP/Teams, MagiskHide (and all sliders) was already enabled and I just figured it was working, but it might not have been.
EDIT - nevermind, it still gave me the error after some time.
Still not working for me on my OnePlus 9 Pro. Removed all files/folder with root/kernel/boot naming from root storage. Deleted MS Teams and Portal app and reinstalled them. Reenabled in Magisk Hide but the Portal tool still detects root. Any other solutions?
Edit:
It worked now. In Magisk Hide I had to select all services from the Portal app and not just the main one.
I did some testing and the latest Microsoft Teams (V1416/1.0.0.2021114201) works with company portal app with up to this version:
Intune Company Portal - 2021-05-12 - v5.0.5147.0
Anything newer eventually leads to 'non-compliant device' error, even with the latest magisk hide fixes.
You can get it on apkpure.
same problems here, even though some months have passed after this thread,
teams requested that I go over and install this intune company portal app,
the problem occurred in 2 (of my 3) devices, all rooted, the 2 that had the problem are rooted with magisk,
no problems on the 3rd one rooted with super su,
anyway, I've spent many hours trying to make it work,
I changed package name of magisk, I updated it,
I uninstalled edxposed and switched to lsposed, etc,
nothing worked,
only thing that worked for me was to roll back to an old teams version,
back to august of 2020,
I downloaded from apkmirror
Would it not be possible to just keep everything the way it is and only unroot the phone?
Or does unrooting mean you have to go back to stock rom...?
of course it would be possible,
I'm not using a custom rom (miui actually) but you wouldn't have to go back to stock anyway,
anyway, I wouldn't want to lose root only for some app that I use on a laptop or work desktop
most of the time, it's useful for the notifications though..
muca89 said:
It worked now. In Magisk Hide I had to select all services from the Portal app and not just the main one.
Click to expand...
Click to collapse
It does work, and you do not need to reinstall or delete anything - just select the Portal app in Magisk Hide, select it again to display its services, and check all the services.
I'm using Teams on different Magisk rooted Androids, also MIUI 12.5.12.0. Why should that be an issue?
jerzyjerzy said:
It does work, and you do not need to reinstall or delete anything - just select the Portal app in Magisk Hide, select it again to display its services, and check all the services.
Click to expand...
Click to collapse
in my opinion, this is the solution.
it works for me
I have zero interest in rooting my phone, but because 5G/VoLTE/VoWiFi are not supported in my country (Slovakia) I had to root it. After successful root, passing SafetyNet and pretty much make everything to work as expected, my Company Portal is detecting root when running Teams and Outlook provisioned by my Company Portal despite having them in DenyList. Is there anyone who managed to pass this?
Thank you.
Happened to me as well. I used Shamiko magisk module and it's all good now.
@chaos193, did you use Riru along?
Or maybe even better question if you don't mind - what modules are you using to successfully pass SafetyNet and hide root?
Can you list them one by one, please?
Either use Shamiko or MagiskHidePropsConf to mask additional properties. I can confirm that InTune Company Portal works fine with SafetyNetFix + Shamiko
p4ra said:
@chaos193, did you use Riru along?
Or maybe even better question if you don't mind - what modules are you using to successfully pass SafetyNet and hide root?
Can you list them one by one, please?
Click to expand...
Click to collapse
It's pretty much what @craigacgomez said. I used Shamiko 0.6 alongside LSposed zygisk release. I'm pretty sure LSposed is not needed but I have it just in case.
chaos193 said:
It's pretty much what @craigacgomez said. I used Shamiko 0.6 alongside LSposed zygisk release. I'm pretty sure LSposed is not needed but I have it just in case.
Click to expand...
Click to collapse
Quick question @chaos193 - I haven't updated Shamiko to 0.6 as the update states that it requires Magisk 25205+. Reckon that would be magisk canary? Or as you using 0.6 with Magisk stable?
WhoIsJohnGalt1979 said:
Quick question @chaos193 - I haven't updated Shamiko to 0.6 as the update states that it requires Magisk 25205+. Reckon that would be magisk canary? Or as you using 0.6 with Magisk stable?
Click to expand...
Click to collapse
I used it with magisk stable 25.2. I think we are all using magisk stable to root our phone right?
I have tried your suggestions, but still does not seem to work. Adding screenshots.
Can you help me, please? What is wrong with my setup?
Following steps work 100% - I had the same issue.
1. Use magisk canary.
2. Install universal safetynet fix MOD 2.0 from displax (Google for "displax github")
3. Use latest shamiko module
4. Activate zygisk
5. Don't enforce denylist
6. Go to denylist and chose all Microsoft apps and tick ALL options for each app.
7. Hide magisk app
I had issue with a specific banking app which detects root by most of the methods. I made it working by using shamiko + airfrozen which i was not really liking.
Now i wnded up with a forked project of magisk bu Husky called magisk delta which brought back magisk hide along with zygisk. With this i don't need shamiko, magiskpropshide, airfrozen or any modules for hiding the root from apps. Yes for safetynet you can use the modded veraion by D. Below is the link. If you are interested have a look at Magisk Delta by HuskyDG... I use the magisk delta canary builds...
I have made it work with first approach. I did a restart of the phone and it worked.
What I am wondering though is the following - I have used the VoLTE/VoWiFi/5G Magisk module, but I don't see the "HD" icon during the call, even though I can browse the internet (when I am not on WiFi). And despite 5G coverage of my current carrier in my area, I don't see 5G icon.
Is there any other module I am missing for this last piece of puzzle?
And last but not least. What scares me the most is that next OTA will completely screw me over after setting everything up. I wish there was a clear tutorial on how to OTA and keep the root without wiping everything out.
p4ra said:
I have made it work with first approach. I did a restart of the phone and it worked.
What I am wondering though is the following - I have used the VoLTE/VoWiFi/5G Magisk module, but I don't see the "HD" icon during the call, even though I can browse the internet (when I am not on WiFi). And despite 5G coverage of my current carrier in my area, I don't see 5G icon.
Is there any other module I am missing for this last piece of puzzle?
And last but not least. What scares me the most is that next OTA will completely screw me over after setting everything up. I wish there was a clear tutorial on how to OTA and keep the root without wiping everything out.
Click to expand...
Click to collapse
I'm not quite sure which VoLTE/VoWiFi/5G Magisk module you are referring to, but I believe enabling 5G requires modified mbn files specific to your country/region.
Regarding OTAs, there are two "How To" guides here with all the details you need.
Blaze1001 said:
Following steps work 100% - I had the same issue.
1. Use magisk canary.
2. Install universal safetynet fix MOD 2.0 from displax (Google for "displax github")
3. Use latest shamiko module
4. Activate zygisk
5. Don't enforce denylist
6. Go to denylist and chose all Microsoft apps and tick ALL options for each app.
7. Hide magisk app
Click to expand...
Click to collapse
I have done exactly this but it still detects
Oneplus 7 pro
LineageOS 19.1 Nov 27th nightly build
This should be all that's needed to pass the compliance checks for Intune
1. Magisk (Zygisk mode)
2. SafetyNet v2.3.1-MOD_2.0
3. Shamiko v0.5.1 (or higher)
4. Magisk deny-list for the following apps (without Enforce deny-list)
a. Company Portal (Intune)b. Microsoft Authenticator (if you use it)c. Microsoft Defender (if you use it)5. Make sure you clear app data for the apps in the deny list after adding them to the deny list
Don't know about this specific app, but in the past I had issues with detection of an "unsecure" device, that was related to ADB debugging being enabled in developer settings...
craigacgomez said:
This should be all that's needed to pass the compliance checks for Intune
1. Magisk (Zygisk mode)
2. SafetyNet v2.3.1-MOD_2.0
3. Shamiko v0.5.1 (or higher)
4. Magisk deny-list for the following apps (without Enforce deny-list)
a. Company Portal (Intune)b. Microsoft Authenticator (if you use it)c. Microsoft Defender (if you use it)5. Make sure you clear app data for the apps in the deny list after adding them to the deny list
Click to expand...
Click to collapse
s3axel said:
Don't know about this specific app, but in the past I had issues with detection of an "unsecure" device, that was related to ADB debugging being enabled in developer settings...
Click to expand...
Click to collapse
Still doesn't work. Its weird because it worked for one night and the next morning it stopped.
UPDATE: its LSPosed I think. But this is the only way to force dark mode on some apps....
UPDATE 2: I disabled forced dark mode on all Microsoft apps in LSPosed plugin and its looking good so far...
UPDATE 3: Had a full day with not a single root detection notification. Looks solid!
s3axel said:
Don't know about this specific app, but in the past I had issues with detection of an "unsecure" device, that was related to ADB debugging being enabled in developer settings...
Click to expand...
Click to collapse
one of the worse parts of it, if not the worst, is that nobody knows what it detects and there's no guide that applies to each and every device,
I tried in 3 devices, the exact same steps and files, etc, it worked on the 1st one, but on the other two.. no!
For all those who still got issues as another idea: Does Google Wallet work ? Is the device play protect certified ?
I ask because to get Wallet to work (and presumably other apps that rely on Safetynet and/or Play Protect certification) the additional step after #5 in the list above is: clear data for Google Play Services and Google Play Store, then reboot (your device will ask for Google backup configuration again).....
I got the same issue with an App called "SwissID". It recognizes magisk for some reason. All other Apps work (like banking, google wallet etc.)
chaos193 said:
It's pretty much what @craigacgomez said. I used Shamiko 0.6 alongside LSposed zygisk release. I'm pretty sure LSposed is not needed but I have it just in case.
Click to expand...
Click to collapse
Its work to me!!! Thanks
Barclays App used to work just fine until about one week ago, when the latest version has been pushed. And they are now switching to an app-only authentication method (no more SMS, no more PINSentry, and definitely not possible through their website). So, if the app can't be used, I will have to either stop using root (which has been really helpful so far), or find a different bank which has an app that works (I believe it's very unlikely).
The Barclays App Version is: 2.73.2 , released in 16/02/2023
Specs:
OnePlus 7
Android 11 (OOS 11.0.2.1GM57BA)
Unlocked Bootloader
TWRP
Rooted with Magisk (25.2):
magisk app hidden
Zygisk enabled
enforce deny list: Enabled (I tried with enabled and disabled)
Deny List:
ALL Google stuff (absolutely anything that had "google" in their name)
Phone (just for safety, I added everything related to phone and dialer)
Barclays App
Magisk Modules:
App Systemizer v17.3.1
Buybox for Android NDK v1.3.4.1
Debloater (Terminal Emulator) v17.3.3
Disable Screenshot Camera Sounds v1.4
Energized Protection v1.3.5
Magisk Hide Props Config v6.12
OnePlus 7 Volume Booster Mod v2
OOS11 Debloater v7
Shamiko v0.6
Systemless Hosts 1.0 (Magisk)
Universal SafetyNet Fix (kdrag0n, modded by Displax) v2.3.1
Play Integrity API Checker:
device integrity: YES
basic integrity: YES
strong integrity: NO
What is happening:
Barclays App is starting
It prompts for registration (asks to set up a PIN)
Throws Error 00006 (which, after some research, seems to be related to Root)
What I did:
Looked for TWRP folder to delete it (I couldn't find it, perhaps I deleted it in the past, however if you can point me to all possible locations where it could be, I'd greatly appreciate it)
Tried both Shamiko and Universal SafetyNet Fix
Deleted storage, cache, from google, barclays, reboot, even uninstalled and reinstalled apps, all the works...
I tried with both Enforce Deny List Enabled and Disabled
Nothing of the above helped with making Barclays App work. Any Suggestions?
Best option atm is use the last version of the Barclays app which still worked (2.72.2) and disable auto update.
Any official way to get the 2.27.2 version? Obviously, because is a banking app, I don't trust mirrors and unofficial repos.
Thanks.
derei said:
Any official way to get the 2.27.2 version? Obviously, because is a banking app, I don't trust mirrors and unofficial repos.
Thanks.
Click to expand...
Click to collapse
https://barclays-bank-plc-banking.en.uptodown.com/android/download/90801956
That is the one I used. I understand your concerns, I was in the same boat before I downloaded it.. But I really need the app working myself. Worked fine though..