GCam for s8 - Samsung Galaxy S8 Themes, Apps, and Mods

Any working GCam for S8 SD? With night sight and all those amazing features, thank you

Looking for the same for Exynos.

https://www.xda-developers.com/google-camera-port-hub/

https://www.celsoazevedo.com/files/android/google-camera/

But which of those work on the S8? The XDA hub goes back go a GCam5 port, which doesn't have Night Sight (as asked for in the OP).

Is it possible to use Gcam 6.x on a Samsung S8 with Exynos or not? Because I tested the following APKs and non of them worked for me:
MGC_6.1.021_BSG_Arnova_TlnNeun_1.2_Final_Fix3_Exynos.apk
> crashes
MGC_6.1.021_BSG_Arnova_TlnNeun_V1.3.030119.0645.apk
> portrait not
> night sight not
> photo booth not
MGC_6.2.024_RazerPhone2_V1c.apk
> night sight crashes
> too bright colors
For me it looks like there is not working Gcam APK for S8 wit Exynos.

_tnt_ said:
Is it possible to use Gcam 6.x on a Samsung S8 with Exynos or not? Because I tested the following APKs and non of them worked for me:
MGC_6.1.021_BSG_Arnova_TlnNeun_1.2_Final_Fix3_Exynos.apk
> crashes
MGC_6.1.021_BSG_Arnova_TlnNeun_V1.3.030119.0645.apk
> portrait not
> night sight not
> photo booth not
MGC_6.2.024_RazerPhone2_V1c.apk
> night sight crashes
> too bright colors
For me it looks like there is not working Gcam APK for S8 wit Exynos.
Click to expand...
Click to collapse
https://www.cyanogenmods.org/forums/topic/gcam-google-camera-galaxy-s8-exynos/

I was not able to use night sight, what settings did you use? @pazi79

updesh94 said:
I was not able to use night sight, what settings did you use? @pazi79
Click to expand...
Click to collapse
HDR+ parameters – 15
Autoexposure – 1.5sec
Correction – 1/6sec
Advanced > Base > Pixel2018 need YUV
Back and front – Pixel 3XL
Advanced > FIX > RAW format – Sensor
Viewfinder format – YUV
Following are the settings for Photo:
Advanced settings > final JPG – 100%
Enhanced HDR+ – yes
Remove zoom – yes
save to DCIM – yes
alternative config – yes
OIS – yes

pazi79 said:
HDR+ parameters – 15
Autoexposure – 1.5sec
Correction – 1/6sec
Advanced > Base > Pixel2018 need YUV
Back and front – Pixel 3XL
Advanced > FIX > RAW format – Sensor
Viewfinder format – YUV
Following are the settings for Photo:
Advanced settings > final JPG – 100%
Enhanced HDR+ – yes
Remove zoom – yes
save to DCIM – yes
alternative config – yes
OIS – yes
Click to expand...
Click to collapse
Great! This worked, Thanks dude! :highfive:

pazi79 said:
HDR+ parameters – 15
Autoexposure – 1.5sec
Correction – 1/6sec
Advanced > Base > Pixel2018 need YUV
Back and front – Pixel 3XL
Advanced > FIX > RAW format – Sensor
Viewfinder format – YUV
Following are the settings for Photo:
Advanced settings > final JPG – 100%
Enhanced HDR+ – yes
Remove zoom – yes
save to DCIM – yes
alternative config – yes
OIS – yes[/Q]
photos are washed and too bright, any settings to change?
Click to expand...
Click to collapse

MantasXcel said:
pazi79 said:
HDR+ parameters – 15
Autoexposure – 1.5sec
Correction – 1/6sec
Advanced > Base > Pixel2018 need YUV
Back and front – Pixel 3XL
Advanced > FIX > RAW format – Sensor
Viewfinder format – YUV
Following are the settings for Photo:
Advanced settings > final JPG – 100%
Enhanced HDR+ – yes
Remove zoom – yes
save to DCIM – yes
alternative config – yes
OIS – yes[/Q]
photos are washed and too bright, any settings to change?
Click to expand...
Click to collapse
me to, too much
Click to expand...
Click to collapse

Here's a fully working gcam version i use for my S8 Active with Nov pie update and configured to my preference. Can't seem to upload or embed a link to the app and config file but here is the version to search for. Enjoy!
MGC_6.1.021_BSG_Arnova-based_v.1.3c_fix_TlnNeun_xcam_5_beta6.apk

_ex0dus_ said:
Here's a fully working gcam version i use and configured to my preference. Can't seem to upload or embed a link to the app and config file but here is the version to search for. Enjoy!
MGC_6.1.021_BSG_Arnova-based_v.1.3c_fix_TlnNeun_xcam_5_beta6.apk
Click to expand...
Click to collapse
How did you configured that?
portrait mode and night not working.

gtrs36 said:
How did you configured that?
portrait mode and night not working.
Click to expand...
Click to collapse
Night sight is as good as it can get and portrait is great!
https://filebin.net/i08xg62mpxxthxfw

_ex0dus_ said:
Night sight is as good as it can get and portrait is great!
https://filebin.net/i08xg62mpxxthxfw
Click to expand...
Click to collapse
Thanks for sharing your config but its give me black screen in camera .
Im using the gcam you mentioned above .

AmirRezaaa said:
Thanks for sharing your config but its give me black screen in camera .
Im using the gcam you mentioned above .
Click to expand...
Click to collapse
What model phone do you have?
Try these links and config steps
https://www.a.n.d.r.o.i.d.s.a.g.e.c...-for-samsung-galaxy-devices-with-night-sight/
https://www.reddit.com/r/GalaxyNote...am_port_snapdragon/?utm_source=reddit-android

_ex0dus_ said:
What model phone do you have?
Try these links and config steps
https://www.a.n.d.r.o.i.d.s.a.g.e.c...-for-samsung-galaxy-devices-with-night-sight/
https://www.reddit.com/r/GalaxyNote...am_port_snapdragon/?utm_source=reddit-android
Click to expand...
Click to collapse
I just saw your orginal post, yours s8 active mine is exynos.
Thanks for the links, i will check them :good:

_ex0dus_ said:
Night sight is as good as it can get and portrait is great!
https://filebin.net/i08xg62mpxxthxfw
Click to expand...
Click to collapse
Can you please tell me how I apply the profile? Thanks!

mrbright25 said:
Can you please tell me how I apply the profile? Thanks!
Click to expand...
Click to collapse
Double tap the blank space between the camera shutter and viewfinder and a hidden menu will pop up.

Related

Google-Camera 7.3 for Redmi Note 7 Pro

NOTICE TO ALL USERS: This thread has been discarded as it has already fulfilled its purpose and therefore is now no longer needed.
Please follow the NEW THREAD!
The saga continues
https://www.celsoazevedo.com/files/android/google-camera/f/changelog373/
Works perfect on my chinese phone, except slow motion.
Klaus69 said:
https://www.celsoazevedo.com/files/android/google-camera/f/changelog373/
Works perfect on my chinese phone, except slow motion.
Click to expand...
Click to collapse
Thanks for the help! I tried this build but it's still very unresponsive. Not sure how exactly it works for you and yet somehow it doesn't work for me. Given that we both have the same Chinese version it doesn't make any sense. However I tried the latest build available from this developer (MGC_6_1_021_xcam6_beta2.apk) and it works very very well! I would even say it's close to perfect. It's just the slow motion which doesn't work at the moment.
It seems the GCam builds maintained by xtrme are the only ones which work with the Chinese version of the RN7Pro. Although these builds are aimed at MI 9, they work for the RN7Pro as well since both of them have the exact same camera sensor.
P.S. Any particular camera settings you are using with GCam? Did you import the XML config file?
[Deleted]
vlachorumsapiens said:
Thanks for the help! I tried this build but it's still very unresponsive. Not sure how exactly it works for you and yet somehow it doesn't work for me. Given that we both have the same Chinese version it doesn't make any sense. However I tried the latest build available from this developer (MGC_6_1_021_xcam6_beta2.apk) and it works very very well! I would even say it's close to perfect. It's just the slow motion which doesn't work at the moment.
It seems the GCam builds maintained by xtrme are the only ones which work with the Chinese version of the RN7Pro. Although these builds are aimed at MI 9, they work for the RN7Pro as well since both of them have the exact same camera sensor.
P.S. Any particular camera settings you are using with GCam? Did you import the XML config file?
Click to expand...
Click to collapse
I don't use any config files.
Only enabled Pixel 2 awb, remove iso limit in dark , no enable auto exposure, and enabled dynamic black lvl.
Worked perfect on chinese rom, working perfect now on global rom.
I tested Arnova8G2 Advanced 1.4 and xtrme's xcam6_beta3. Photo, 4K video and nightshot. Both works fine.
Nope. On the Note 7 Pro, none of the versions (including this one) works perfectly. The portait mode still freezes on my Note 7 Pro from China. The Night Mode does work with this one though.
I've the Chinese note 7 pro and this one works well except for slow motion
https://f.celsoazevedo.com/file/gcamera/MGC_6.2.024_RN7_V1d_plusplus.apk
Sent from my Redmi Note 7 Pro using Tapatalk
I've been doing a lot of testing with several GCam builds on the Redmi Note 7 Pro and I finally found one which gives amazing results. Although it isn't specifically tailored for the Sony IMX586 sensor as we find with other GCam builds developed for the Mi 9 (such as the one modded by xtrme), for some reason it produces much better photos with better color accuracy, details, sharpness, exposure and dynamic range. This GCam build is modded by bulkin043 and it is tailored for a variety of different devices such as the Redmi Note 5 / Pro (whyred), Redmi Note 7 (lavender), Mi A1 (tissot), Mi A2 (jasmine), Mi 6x (wayne) and Mi 8 Lite (platina). During my extensive tests I've found this build to be exceptionally stable with smooth transitions when switching through menus and a very responsive UI.
This build is packed with a lot of great settings such as "Custom Eszdman v2.2" quality level for NightSight, Camera API2 "Metering mode", "ISO priority", and "Lens distortion correction", "Lens blur resolution" and many other unique features. Best of all it comes with a dedicated interface theme (Auto/Light/Dark) which automatically adapts to daylight or night-time conditions. Photobooth and Slow Motion aren't working unfortunately, but that's the case with many GCam builds and so it remains a work in progress.
The only bothersome issue with this build is due to the fact that it permanently crashes video mode when selecting 60fps. Please avoid this framerate for now, or else you will have to reinstall GCam to gain access to video mode again.
This Google Camera is based on the 6.2.030 version and you can download it from > HERE
I will share below the optimal settings for the Redmi Note 7 Pro (after having it thoroughly tested I've found these particular settings to give the best possible results):
[Libs]
Default from Google
[Base settings]
Back camera > Pixel 3a XL/with Pixel 3a config (perfect balance between noise control, details and sharpness with accurate exposure) or Pixel XL/with Pixel 3 config (increased noise, details and sharpness with slightly higher exposure)
Front camera > Pixel 2 XL (good colors, details and sharpness with more noise control) or Nexus 5X (greater details and sharpness with slightly more noise)
Config > Pixel 3a/with Pixel 3a XL and Pixel 3 XL AWB or Pixel 3/with Pixel XL and Pixel 2 XL AWB
[Saturation]
Front Camera > Highlight Saturation (1.9) / Shadow Saturation (2.3)
Back Camera > Highlight Saturation (1.0) / Shadow Saturation (1.6)
[Noise reduction]
Back camera > Activate
Front camera > Activate
DO NOT enable HDR+ Denoise!
[Enable these toggles]
> HDR+ Control
> Save to /DCIM/Camera
> Quick auto exposure settings
> Remove the ISO limit
> Portrait/Disable zoom
> Recompute AWB > On (mandatory!)
All other settings remain on default
NOTICE: Keep in mind that these settings have been tested only on the Redmi Note 7 Pro (China variant). For other compatible devices supported by this build you will have to experiment with the settings yourselves.
I've tested the latest xtrme GCam build and I'm very pleased to see Pixel AWB has finally been fixed. We are getting very close to a true Google Camera performance on the Mi 9 and Redmi Note 7 Pro. File size is also correct and image quality is closer to MIUI stock camera (exposure/highlight conservation is still better on stock camera though).
You can download the latest GCam build developed by xtrme from HERE
After trying various settings I've managed to find the best configuration which provides amazing image quality, with great detail, sharpness, color reproduction, noise control, exposure and dynamic range. There's one single XML config file suitable for both daytime and nighttime conditions which you can download from HERE
Here's a tutorial on how to import/export XML config files for GCam
For NightSight you need steady hands as image processing is slower, but provides maximum quality. There's also a small annoyance with my config as NightSight suggestion doesn't work with BSG Config PixelPlusNS Hdr+, but this issue will eventually be fixed.
Thanks so much @vlachorumsapiens
vlachorumsapiens said:
I've tested the latest xtrme GCam build and I'm very pleased to see Pixel AWB has finally been fixed. We are getting very close to a true Google Camera performance on the Mi 9 and Redmi Note 7 Pro. File size is also correct and image quality is closer to MIUI stock camera (exposure/highlight conservation is still better on stock camera though).
You can download the latest GCam build developed by xtrme from HERE
After trying various settings I've managed to find the best configuration which provides amazing image quality, with great detail, sharpness, color reproduction, noise control, exposure and dynamic range. There's one single XML config file suitable for both daytime and nighttime conditions which you can download from HERE
Here's a tutorial on how to import/export XML config files for GCam
After importing config file, go to Settings > Advanced > Noise Reduction > Untick & Tick again "Activate" toggles (sub-menu toggles also) in first three lenses. This procedure has to be done or else noise reduction settings won't be in effect.
For NightSight you need steady hands as image processing is slower, but provides maximum quality. There's also a small annoyance with my config as NightSight suggestion doesn't work with BSG Config PixelPlusNS Hdr+, but this issue will eventually be fixed.
Click to expand...
Click to collapse
For some reasons, the latest GCam from xtreme is not working good for me. Even after using your config files, colors are still not realistic. I am using Arnova's latest and it is working great right out of the box.
AbhiAbhiBisht said:
For some reasons, the latest GCam from xtreme is not working good for me. Even after using your config files, colors are still not realistic. I am using Arnova's latest and it is working great right out of the box.
Click to expand...
Click to collapse
Not sure why it's not working well for you. Which version are you using from Arnova? Is it the latest 2.0 version?
[Updated XML download link for xtrme GCam]
> disabled noise reduction settings completely (BSG Config PixelPlusNS Hdr+ module does enough noise reduction on its own)
> decreased HDR+ frames to 7
> set correction NightSight to "Off"
The result is faster image processing, reduced time for capturing photos with NightSight, increased details and sharpness with less chances to end up with blurry photos.
vlachorumsapiens said:
Not sure why it's not working well for you. Which version are you using from Arnova? Is it the latest 2.0 version?
Click to expand...
Click to collapse
Yes. Beta 5.
AbhiAbhiBisht said:
Yes. Beta 5.
Click to expand...
Click to collapse
Beta5 is xtrme's version. I was inquiring about Arnova's version.
vlachorumsapiens said:
Beta5 is xtrme's version. I was inquiring about Arnova's version.
Click to expand...
Click to collapse
I am sorry. This one.
https://f.celsoazevedo.com/file/gcamera/GCam_6.1.021_Advanced_V1.5.190418.1850.apk
AbhiAbhiBisht said:
I am sorry. This one.
https://f.celsoazevedo.com/file/gcamera/GCam_6.1.021_Advanced_V1.5.190418.1850.apk
Click to expand...
Click to collapse
I've tried Arnova's version and it's actually very similar with xtrme's version. Color reproduction is pretty much the same when using certain libraries like "Default from Google" or "CSeUs", in combination with BSG Config PixelPlusNS Hdr+ and Pixel 3 XL for base settings. However what Arnova's GCam lacks is a special library called Xlib v2.2s which provides far better details than any other library, with much better exposure in the shadows. I've tried many different builds with many different settings, but none can come close to this one. NightSight is absolutely amazing, but image processing is slower than on Arnova's GCam because it needs more time to capture more light and apply the adequate post-processing. But the trade-off is worth it. Slower processing and maximum quality is better than faster processing and lower quality. It should come as no surprise since xtrme's version is the only build specifically tailored for the Mi 9 which has the exact same main camera sensor as the Redmi Note 7 Pro. I just don't understand why it's not working well for you. But otherwise Arnova's version can take decent photos nonetheless. I think it's a bit better than the versions modded by bulkin043 and BSG when it comes to color reproduction and NightSight.
vlachorumsapiens said:
I've tried Arnova's version and it's actually very similar with xtrme's version. Color reproduction is pretty much the same when using certain libraries like "Default from Google" or "CSeUs", in combination with BSG Config PixelPlusNS Hdr+ and Pixel 3 XL for base settings. However what Arnova's GCam lacks is a special library called Xlib v2.2s which provides far better details than any other library, with much better exposure in the shadows. I've tried many different builds with many different settings, but none can come close to this one. NightSight is absolutely amazing, but image processing is slower than on Arnova's GCam because it needs more time to capture more light and apply the adequate post-processing. But the trade-off is worth it. Slower processing and maximum quality is better than faster processing and lower quality. It should come as no surprise since xtrme's version is the only build specifically tailored for the Mi 9 which has the exact same main camera sensor as the Redmi Note 7 Pro. I just don't understand why it's not working well for you. But otherwise Arnova's version can take decent photos nonetheless. I think it's a bit better than the versions modded by bulkin043 and BSG when it comes to color reproduction and NightSight.
Click to expand...
Click to collapse
I've again tried xtreme's version of GCam and it's working fine now. But there is one issue that the phone lags extensively after taking a photo until it processes.
AbhiAbhiBisht said:
I've again tried xtreme's version of GCam and it's working fine now. But there is one issue that the phone lags extensively after taking a photo until it processes.
Click to expand...
Click to collapse
Yes. That's the downside of this version of GCam. Image processing is slower than on other versions, but image quality is the best.

The best working GCam for MOTO G7 Power

I have tested many of the GCam apps available from the Google Camera Port hub here
The best working one for my Moto G7 Power XT1955-4 is the GCam MOD from the developer arthur.
Test the different settings to choose what is working best for you, especially you can dig in the Advanced settings.
For example you can:
- use the H.265/HEVC format for video;
- get a RAW+JPEG control on your main screen
- get HDR+ (HDR+ and HDR+ enhaced)
- get a Night Sight shortcut for night shooting on the main camera view
- adjust many noise reduction parameters
- change and test the AWB (Default, Pixel 2, Pixel 3)
-change the JPEG quality 90%, 95%, 97% and 100%
- change the HDR+ Enhanced frames: Default=8, Medium=14, High=18, Very high=24
and many more!
You can download the latest version of the GCam back.rider apk from here
Other versions made from other developers can be downloaded from Google Camera Port hub
---
EDIT August 2020:
From some time I'm using GCam modifications made from Parrot043, it was working pretty well with Android 9 before, and now with Adnroid 10 after I upgraded my Moto G7 Power to Q.
Strongly recommend you to test the Parrot043 GCam modification
If you still use Android 9, than you need GCam version 7.0.x
If you are with Android 10, then version 7.3.x or bigger is for your OS
@lubo777 can you please tell me exact settings you have as i dont really have a clue. Just need it for good pictures and portrait mode. Thanks in advance
Very low light sample made with the default G7 Power camera app and the GCam at 5:30 at the morning
Default Cam G7 Power
GCam G7 Power
Syed.yasir2 said:
@lubo777 can you please tell me exact settings you have as i dont really have a clue. Just need it for good pictures and portrait mode. Thanks in advance
Click to expand...
Click to collapse
I recommend to test NOT the latest GCam MOD from back.rider version 1.3a but a bit older version which have better picture details and less noise GCam 2.6a
This was reported on the XDA page of the GCam MOD and I can confirm it.
Bellow are the settings I use: see the attachment.
If you like to install multiple versions of a GCam and test the differences you can do that easy with App Cloner app - for example you can install the latest GCam 1.3a and the older 2.6a and see the difference
Appreciate your help. Thanks mate
So what did anybody figure out? I'm using the latest by Sanity. I can never tell the difference between any of them other than the HDR rendering taking longer or shorter.
Thanks for the advice. Can anyone recommend a way to launch GCam using the default twisting moto-action? It's possible to do once the phone is unlocked, but a locked phone always launches the stock camera app.
I'm also looking for a way to save from GCam to an external sd card. The best way seems to be through using a Tasker (or similar) profile to automate moving photos over, then deleting from inboard storage. There's a GCam Tools app that replicates this behavior, but seems a bit buggy.
Cheers
There is a new version of the GCam MOD GCam_6.2.030_N7P_test1.apk which have the best results according to few tests below ...
Bellow are some day shooting examples with HDR+ and no HDR+ made with the latest version 1 of the GCam, the previous one 1.3a and version 6.1.021_N7P_test2.6a of the GCam MOD from back.rider555 made with MOTO G7 Power
My personal opinion is that the latest version is the best one according to AWB and details!
back.rider555 thank you for your work!!!
All 3 versions have the same setup, I'm attaching also my setup as a attachment below the images.
Latest version GCam_6.2.030_N7P_test1.apk NO HDR+
Latest version GCam_6.2.030_N7P_test1.apk with HDR+
Previous version GCam-6-2-024-N7-P-test1-3a NO HDR+
Previous version GCam-6-2-024-N7-P-test1-3a with HDR+
Older version GCam-6-1-021-N7-P-test2-6a NO HDR+
Older version GCam-6-1-021-N7-P-test2-6a with HDR+
The latest version GCam_6.2.030_N7P_test1 with my MOTO G7 Power have the best results as a AWB colors correctness. Also the image details are perfect!
lubo777 said:
There is a new version of the GCam MOD GCam_6.2.030_N7P_test1.apk which have the best results according to few tests below ...
Bellow are some day shooting examples with HDR+ and no HDR+ made with the latest version 1 of the GCam, the previous one 1.3a and version 6.1.021_N7P_test2.6a of the GCam MOD from back.rider555 made with MOTO G7 Power
My personal opinion is that the latest version is the best one according to AWB and details!
back.rider555 thank you for your work!!!
All 3 versions have the same setup, I'm attaching also my setup as a attachment below the images.
Latest version GCam_6.2.030_N7P_test1.apk NO HDR+
Latest version GCam_6.2.030_N7P_test1.apk with HDR+
Previous version GCam-6-2-024-N7-P-test1-3a NO HDR+
Previous version GCam-6-2-024-N7-P-test1-3a with HDR+
Older version GCam-6-1-021-N7-P-test2-6a NO HDR+
Older version GCam-6-1-021-N7-P-test2-6a with HDR+
The latest version GCam_6.2.030_N7P_test1 with my MOTO G7 Power have the best results as a AWB colors correctness. Also the image details are perfect!
Click to expand...
Click to collapse
Thank you for the detailed testing and posting your photo samples. That's the most thorough I've seen yet. Personally, I feel the NO HDR+ image taken with the GCam-6-2-024-N7-P-test1-3a looked the best. Not by much, but marginally. The G7 Power images seem to have a very shallow dynamic range and the HDR+ photos from each version seems to blow out the highlights (see lower right hand corner grassy area where there is direct sunshine) more than the NO HDR+ samples. I would have expected the opposite, with the HDR photos preserving more shadow detail while taming the highlights, but the blades of grass in the NO HDR+ samples are more clearly defined.
Yesterday I discovered that I have some problems with the Focus on my MOTO G7 Power with the latest version. I don't now if there is such a problem with Nokia 7 Plus camera, probably the problem is Moto camera hardware specific ...
The problem is that in wide scenes (not closeup) in Camera Mode the focus is 100% NOT correct where I have tapped on the screen ...
In Portrait Mode everything is OK with the Focus ... very strange.
On closeup scenes the Focus is much better in Camera and Photo modes, as you can see bellow.
On all pictures the Focus is on the strawberry.
Camera mode NO HDR
Camera mode HDR+
Camera mode HDR+ enchanced
Portrait mode NO HDR+
Portrait mode HDR+
Portrait mode HDR+ enhanced
Night Sight
Night Sight
I have tested A LOT of the different GCAM Mod's and definitely 100% the best one working with all possibilities is the GCAM Mod from arthur
What in this GCAM MOD is especially useful for me:
1. The possibility to save Pictures / Video on external SD Card
2. Back and front Camera possibility to fine tune the "Noise suppression" the "Black level adjustment" and "Saturation"
3. To save Portrait pictures in the same folder with all other folders (by default GCAM saves each Portrait image in a different folder )
4. Burst mode - working perfect!!!
5. Slow motion mode
6. Exposure control features
7. Manual Focus options - especially to have focus slider on the camera screen
8. Zoom Noise suppression
9. Video Bitrate change
10. Developer Settings
In this Mode there is no Night Sight link / menu - you get perfectly working Night Sight feature on the main Camera screen in HDR+ enchanced
Below are few pictures made with this mod at night and day
for me arthurs mod isnt saving any pictures even if i set sd card folder...
mk4y said:
for me arthurs mod isnt saving any pictures even if i set sd card folder...
Click to expand...
Click to collapse
I'm not using / haven't used the External Card feature, because the Internal SD Card is much faster for Burst pictures / video.
even out of the box with internal setting wont save any picture for me
mk4y said:
even out of the box with internal setting wont save any picture for me
Click to expand...
Click to collapse
You use the latest version: MGCam_v.3.5.2_R4X.apk ?
Very very strange ... here is completely OK
yes only front camera pictures are saved for me!
mk4y said:
yes only front camera pictures are saved for me!
Click to expand...
Click to collapse
I have the same problem with that version not being able to save to the SD card. Maybe a permissions issue.
Interestingly, the main features of the app properly display, for me, in English. But, the error message items are in cirillic....
I have found another GCam MOD which have much more Camera Extended settings and is the best working for me.
I'm testing it on my phone for few days and have to say that this GCam MOD have everything I need as a fine tinning functionality.
jlsatt4 said:
I have the same problem with that version not being able to save to the SD card. Maybe a permissions issue.
Interestingly, the main features of the app properly display, for me, in English. But, the error message items are in cirillic....
Click to expand...
Click to collapse
Yes, because one of the best GCam MOD hackers are Russians ...

Stock cam vs gcam (without ia /edit)

Here you can compare shots on realme 5 pro stock vs gcam (main cam) . The result are the same on x2 phone and others phone. Colors and contrast are too strong on the native app, more unatural. Thanks to all developpers! https://photos.app.goo.gl/qUoNtF34C6wEQkVx5
GCam_7.3.018_Urnyx05-v1.7-fix.apk
Flo7591 said:
Here you can compare shots on realme x2 stock vs gcam (main/wide angle) Thanks to all developpers!
https://photos.app.goo.gl/W28pVxxMqvUUadjf6. https://photos.app.goo.gl/GygFb7JTSdfQmzry7 GCam_7.3.018_Urnyx05-v1.7-fix.apk
Click to expand...
Click to collapse
What's your config in gcam? Can you share it? Thanks, nice pictures!
d_fens said:
What's your config in gcam? Can you share it? Thanks, nice pictures!
Click to expand...
Click to collapse
Hello. thank you, yes then first of all I used the xml file "anand" then I was in the advanced parameters / activate modifications of libraries / and changed the shadows to - 1 instead of 6 (dark). for the wide angle you just have to activate it manually in advanced settings.
Flo7591 said:
Hello. thank you, yes then first of all I used the xml file "anand" then I was in the advanced parameters / activate modifications of libraries / and changed the shadows to - 1 instead of 6 (dark). for the wide angle you just have to activate it manually in advanced settings.
Click to expand...
Click to collapse
Hello,
Would you be able to share a main camera RAW file from the GCAM and the Stock cam ?
Also, from what I have seen with the media photo samples is that the stock 64mpx mode is way better than the 16mpx JPG.
There is more color info and better sharpness on the 64mpx JPG when downscaled with software like PhotoShop to 16mpx.
Would be very interesting to compare a stock DNG, GCAM DNG and stock 64mpx JPG to see what we can find out.
Really interested in buying this phone if the RAW files are good.
Thank you and have a nice weekend !
h9v1 said:
Hello,
Would you be able to share a main camera RAW file from the GCAM and the Stock cam ?
The JPG looks good on the GCAM, curious to see the RAW files, and find out how much info there is.
Really interested in buying this phone if the RAW files are good.
Thank you and have a nice weekend !
Click to expand...
Click to collapse
. Here i made some raw shots https://photos.app.goo.gl/zKKuuQCo4skT6XZeA
Flo7591 said:
Hello. thank you, yes then first of all I used the xml file "anand" then I was in the advanced parameters / activate modifications of libraries / and changed the shadows to - 1 instead of 6 (dark). for the wide angle you just have to activate it manually in advanced settings.
Click to expand...
Click to collapse
I increased the contrast to 1,5 in the avdanced parameters instead 1 because with anand xml the contrast is a little bit too flat..
Flo7591 said:
. Here i made some raw shots https://photos.app.goo.gl/zKKuuQCo4skT6XZeA
Click to expand...
Click to collapse
Hello, Google Photos doesn't let me download the DNG file(downloads only a jpg from the DNG - They also compress the dng files).
Would you be able to upload the DNG into another file sharing page ?
Also, could you share a 64mpx photo from the stock cam and a GCAM dng of the same shot ?
I'll post my findings here.
Thank you for the help!
@Flo7591 THREAD CLOSED on request of OP who has sold his Realme X2.

GCam (exynos version from BSG)

Hello,
Some of you know the port of GCam made by Zoran, the ZGcam (https://koopahtmaniac.com/). The only partial working version of exynos version.
A few days ago, the person that started GCam port, BSG, released a version with support to exynos processors.
Changelog of the public version from BSG (8.1.101 from 03/10/2021):
- Added support for devices with Exynos processors running Android 10+.
- Fixed problems with add-on modules for Sony devices.
- Fixed all known issues with Google Pixel 4, 4XL, V
- The design has been redesigned (it will still be improved and a description of the settings and translation will be added).
- Added gallery selection by default (you don't need to include anything, everything is automatically enabled).
- Removed depth modules that could not shoot.
- Fixed shortcuts.
- Many minor fixes.
Click to expand...
Click to collapse
Source celsoazevedo.com
All versions from BSG
I've tested this and the back camera works fine (better with AWB activated). But the front camera doesn't work (maybe they can fix this in the future).
I'm just sharing this. I'm not involved in the development or celsoazevedo's website.
Note: Choose "com.samsung.android.ruler" version. If this doesn't work, try the version "com.samsung.android.scan3d"
A few things:
Frontal camera
Now, the frontal camera wont work out of the box. To make the front camera working:
Open GCam
Swipe down to open the quick settings menu and click in the settings icon
Choose "Modules"
Choose Front (0.9)
Swipe down until you see "ViewFinder Format". Change from JPEG to YUV
Go back and do the same for the Front (1.0)
Now, you can take pictures with the frontal cameras. Note that I couldn't make both lens working, only one (even you see the button to switch to the other camera, for me doesn't work).
Telephoto or ultra wide lens
By default, you can use only 2 cameras. But S10+ have 3.
To use the telephoto or ultra wide lens:
Open GCam
Swipe down to open the quick settings menu and click in the settings icon
Choose "Module"
You should see 3 entries for "Back". Each have the "zoom value"
Back (0.5) -> ultra wide
Back (1.0) -> main
Back (1.9) -> telephoto
Now you should choose the lens you don't want. Click on the lens you don't want, scroll down and choose "Disable this lens". For example: You want ultra wide and main cameras. So you would disable the telephoto lens. If you want telephoto, you need to disable ultra wide. You only have 2 options on the viewfinder, you need to trick the camera to think you only have 2 lens, so that the correct lens appear.
Other settings:
Settings -> Global: -> JPEG Compression to 98% or even 100%
This will increase the photo quality
Settings -> Advanced -> Control HDR+
Then go to the viewfinder, swipe down and choose HDR+ with a little symbol in the circle (button in the right). Each photo will take longer to take, but you will have more quality
Settings -> Gobal: -> Focus Tracking (Photo)
Click in a subject and it will keep that subject in focus, even if you move the camera
Share your experience with this new version
Thanks for sharing.
I'm wondering which of the five .apk for version MGC_8.1.101_A9_PV0m is the right one for a Exynos device.
geronimoge said:
Thanks for sharing.
I'm wondering which of the five .apk for version MGC_8.1.101_A9_PV0m is the right one for a Exynos device.
Click to expand...
Click to collapse
The 2nd one with .Eng
Abduljalal Ahman said:
The 2nd one with _Eng.apk
Click to expand...
Click to collapse
Just gave it a try: As soon as I start the app (*Eng.apk / *Snap.apk) it crashes. So I can't use it.
Running LOS 18.1. without GApps.I think that's the reason even if ZGCam was working all the time and I have fake gcam services provider installed.
Logcat:
FATAL EXCEPTION: main
Process: org.codeaurora.snapcam, PID: 11852
java.lang.RuntimeException: Unable to create application com.google.vr.vrcore.base.api.util.Application: java.lang.SecurityException: Failed to find provider com.google.android.gsf.gservices for user 0; expected to find a valid ContentProvider for this authority [...]
The below version worked perfectly on S10 Exynos.
MGC_8.1.101_A9_PV0m_ruler.apk (com.samsung.android.ruler)
geronimoge said:
Just gave it a try: As soon as I start the app (*Eng.apk / *Snap.apk) it crashes. So I can't use it.
Running LOS 18.1. without GApps.I think that's the reason even if ZGCam was working all the time and I have fake gcam services provider installed.
Logcat:
FATAL EXCEPTION: main
Process: org.codeaurora.snapcam, PID: 11852
java.lang.RuntimeException: Unable to create application com.google.vr.vrcore.base.api.util.Application: java.lang.SecurityException: Failed to find provider com.google.android.gsf.gservices for user 0; expected to find a valid ContentProvider for this authority [...]
Click to expand...
Click to collapse
As it seems there is an issue with the fake services needed by GCam.
But there's already a workaround as written here.
So we have a solution again if you don't want to use GApps.
Hello, I don't know if that's the only thing for me, but when I use GCam, I have a small image lag.
dcop7 said:
Hello,
Some of you know the port of GCam made by Zoran, the ZGcam (https://koopahtmaniac.com/). The only partial working version of exynos version.
A few days ago, the person that started GCam port, BSG, released a version with support to exynos processors (probably a collaboration with Zoran). This could be a milestone to have a better version to exynos processors.
Source celsoazevedo.com
I've tested this and the back camera works fine (better with AWB activated). But the front camera doesn't work (maybe they can fix this in the future).
I'm just sharing this. I'm not involved in the development or celsoazevedo's website.
Share your experience with this new version
Click to expand...
Click to collapse
Thank you.
I was using ZGCam from koopahtmaniac.com and that was working reassonable well. Just now installed this BSG's version: MGC_8.1.101_A9_PV0m_Eng.apk and that is working even better and more fluid. Thank you for pointing that out.
I'm running samsung starlte S9, with Lineageos 18.1 en Nikgapps
Koffietijd said:
Thank you.
I was using ZGCam from koopahtmaniac.com and that was working reassonable well. Just now installed this BSG's version: MGC_8.1.101_A9_PV0m_Eng.apk and that is working even better and more fluid. Thank you for pointing that out.
I'm running samsung starlte S9, with Lineageos 18.1 en Nikgapps
Click to expand...
Click to collapse
I overlooked an issue with front camera. Rarely use that. Front camera is making pink/purple pictures.
Does anyone know how to fix that?
Maybe a cameralib from latest vendor-stock?
Hi, How do you switch to f2.4? Thanks.
New versions are available
geronimoge said:
New versions are available
Click to expand...
Click to collapse
Yes, from time to time there are new versions
MGC_8.1.101_A9_GVq_ruler.apk and MGC_8.1.101_A9_GVq_scan3d.apk seem to be working fine on Exynos. Also, the front camera launches, but the capture button doesn't save the picture.
Also, I can't get the wide-angle lens working here by tweaking the mod settings. However, I got the wide-angle lens working in ZGCAM.
Although, this version is actually quite smoother. Hopefully, we will have the front cam working soon
balrajs99 said:
MGC_8.1.101_A9_GVq_ruler.apk seem to be working fine on Exynos. Also, the front camera launches, but the capture button doesn't save the picture.
Click to expand...
Click to collapse
Same here
balrajs99 said:
MGC_8.1.101_A9_GVq_ruler.apk and MGC_8.1.101_A9_GVq_scan3d.apk seem to be working fine on Exynos. Also, the front camera launches, but the capture button doesn't save the picture.
Also, I can't get the wide-angle lens working here by tweaking the mod settings. However, I got the wide-angle lens working in ZGCAM.
Although, this version is actually quite smoother. Hopefully, we will have the front cam working soon
Click to expand...
Click to collapse
I think there is a beta version that maked the front cam working. We just need to wait a bit more.
I was able to use the wide-angle lens. But I've found a limitation. You either have the wide angle or the telephoto lens. You can't have the hability to choose both when you want.
For an example, I had the 1x option and sliding to the left I have 0.5x. But no 2x.
So, I've gone to the settings and disable the lens 0.5x. Then it appears the 2x lens.
Hope it will be a fix in the future.
dcop7 said:
I think there is a beta version that maked the front cam working. We just need to wait a bit more.
I was able to use the wide-angle lens. But I've found a limitation. You either have the wide angle or the telephoto lens. You can't have the hability to choose both when you want.
For an example, I had the 1x option and sliding to the left I have 0.5x. But no 2x.
So, I've gone to the settings and disable the lens 0.5x. Then it appears the 2x lens.
Hope it will be a fix in the future.
Click to expand...
Click to collapse
hi, i have s10e device can you teach me how to use wide angle lens? (Root)
I would prefer gcam 8.1 but 7.4
please help me
Hello friend can you please tell me how to use telephoto lens and wide angle in gcam port latest by BSG?
Aga.bogdan said:
Hello friend can you please tell me how to use telephoto lens and wide angle in gcam port latest by BSG?
Click to expand...
Click to collapse
Just install the apk. However, I did find that you can only use 2 lens at time. So, you can use the main and telephone lens. If you want the switch the telephone by the wide angle, you need to disable the telephone lens in the settings
But problem is I don't find setting anything related to telephoto lens?

General GCAM for A52 4G/5G

Hello guys
The BSG versions of the Gcam mod works really stable on our device. But there aren't optimized configs available, so the colors do need to get a little bit tweaked. In the newest versions, it's possible to save and load configs. So it would be nice if we can test some settings out. I also tried it, so you can use it as a base if you want.
Some notes about the changes:
SlibP Custom lib
some settings in "Additional modules settings" (much more to try out there, that's the main place to play around)
activated instantaneous hdr+ enhanced (hdr+ enhanced but without loading time [ZSL], but viewfinder lags a little bit while rendering the final image because of the phone's performance)
Location to place config file: \Download\MGC.8.1.101_Configs
Used Gcam version: https://www.celsoazevedo.com/files/android/google-camera/dev-bsg/f/dl16/
There is also a thread for the A52 5G. Because both devices use the same cameras, it would be great to have one place to tinker.
Which is the apk I have to download? Why are there so many options?
Is it OK to download the fist one?
Wierd, the Samsung cam has way more HDR.
LanguageSoez said:
Which is the apk I have to download? Why are there so many options?
Is it OK to download the fist one?
Click to expand...
Click to collapse
Some manufacturers only give access to the cameras for specific package names. With the Samsung ones, you should be on the safe side. You can also install different versions with different names to make tests
LanguageSoez said:
Wierd, the Samsung cam has way more HDR.
Click to expand...
Click to collapse
Try to disable "instantaneous hdr+ enhanced" and make sure hdr+ enhanced is activated. I think the google stock libs are a little bit brighter, so it should also look more like HDR. There's also a setting to change how many pictures are combined for a HDR+ image, try to increase the value. For me, too much of an HDR effect makes the image unnatural
Do the app always need to restart everytime changing lense ? And I got weird flashes on screen while trying to take a picture.
phoberus said:
Try to disable "instantaneous hdr+ enhanced" and make sure hdr+ enhanced is activated. I think the google stock libs are a little bit brighter, so it should also look more like HDR. There's also a setting to change how many pictures are combined for a HDR+ image, try to increase the value. For me, too much of an HDR effect makes the image unnatural
Click to expand...
Click to collapse
I actually agree that Samsung's pictures look better (as in more accurate to real life) when in bright conditions. GCam has slightly lower noise, but no matter what HDR mode I choose, Samsung still has better HDR and the picture looks brighter overall. GCam's night mode is much better, though.
First one is Samsung, second is Gcam. Samsung's colours are closer to life. Keep in mind that the houses are brightly lit, as this was taken in the morning and they're facing East. For example the flowers in the pot in the balcony of the left house look very bright and vivid IRL. (The sharpness of the shadows near the roof is likely due to clouds moving)
First one is Samsungs, second is Gcam HDR+, third is Gcam HDR+ Enhanced
Both Gcam HDR+ Enhanced (7 or 15 frames doesn't do much), but first one with Google's AWB (like the previous ones), second one without. The second one looks much better, but a little over-saturated. One thing I did notice in the configs is that the AWB is set for a Sony IMX686 sensor, which I don't know if it is correct. I've been unable to find details on the sensor used in the A52. In any case, It seems that the takeaway here is to keep Google's AWB off.
These were all taken using @phoberus 's config file.
ImGonnaTryScience said:
I actually agree that Samsung's pictures look better (as in more accurate to real life) when in bright conditions. GCam has slightly lower noise, but no matter what HDR mode I choose, Samsung still has better HDR and the picture looks brighter overall. GCam's night mode is much better, though.
Click to expand...
Click to collapse
Thanks for the testing. I can confirm that the brightness and colors are not quite good yet. But almost everything should be adjustable. So we still have to test a bit. The sensor I got from gsmarena.com, but is just a guess from them. By default, Pixel2 would be active, which is certainly not correct, but also worked.
Brightness correction: Additional modules settings > Lens x > Exposure compensation
saturation: Additional modules settings > Lens x > Ram Patcher > Saturation (off means it gets the variables from the lib, there are also other nice settings there to create our own lib)
phoberus said:
Thanks for the testing. I can confirm that the brightness and colors are not quite good yet. But almost everything should be adjustable. So we still have to test a bit. The sensor I got from gsmarena.com, but is just a guess from them. By default, Pixel2 would be active, which is certainly not correct, but also worked.
Brightness correction: Additional modules settings > Lens x > Exposure compensation
saturation: Additional modules settings > Lens x > Ram Patcher > Saturation (off means it gets the variables from the lib, there are also other nice settings there to create our own lib)
Click to expand...
Click to collapse
When can we expect a stable optimized and stable gcam for our device. Will you please try contacting gcam developers personally? And also, please drop a link of the gcam you think to be the best one till now.
mushfiqurmasum said:
When can we expect a stable optimized and stable gcam for our device. Will you please try contacting gcam developers personally? And also, please drop a link of the gcam you think to be the best one till now.
Click to expand...
Click to collapse
BSG is only in a Russian forum active. Arnova8G2 also makes good builds, but he only enables the app for the phones he has enough testers. We could ask him here: https://forum.xda-developers.com/t/app-arnova8g2s-google-camera-port.3862448/
Device name: Galaxy A52
Can we get a port for Galaxy A52 4G please?
fix choppy/stuck wide angle and front camera by going into additional settings and changing camera2API level to Level3.. scan3d works fine. but pictures are dark, something with whitebalance
> used MGC_8.1.101_A9_GVt_ruler_libs.apk
> A52 4G / LTE
phoberus' config crashes my GCam viewfinder. I can't test the actual image quality yet since it's the middle of the night here as I'm posting this message.​
So I tried Nikita's version, in terms of Color and HDR (default) it's the closest to the default camera app. I'm still playing around with the settings, so pictures to follow.
So, M51 has a similar camera setup with A52 so I thought I'd use a GCAM version from the M51 GCAM thread. Just testing Night mode and it's very clear that GCAM (right) works better. I'll edit this post to include more samples later.
Valthek said:
So, M51 has a similar camera setup with A52 so I thought I'd use a GCAM version from the M51 GCAM thread. Just testing Night mode and it's very clear that GCAM (right) works better. I'll edit this post to include more samples later.
Click to expand...
Click to collapse
Any version of GCAM I tried works better in night mode than the default camera. The problems I have is with in brightly lit scenes.
ImGonnaTryScience said:
Any version of GCAM I tried works better in night mode than the default camera. The problems I have is with in brightly lit scenes.
Click to expand...
Click to collapse
I actually tried a version of Greatness' GCAM and produced better daytime pictures, color was somewhat natural but it had better details (not noise). Unfortunately, I can't get the wide-angle lens and videos to work so I scrapped it.
I honestly don't mind the issues regarding color/hdr issues since a quick application of a vibrance filter is almost indistinguishable from the default cam. I mean it could be what the default samsung camera app is doing.
Edit: Also strange thing, low light (outdoor dusk scenario) and I get plenty of noise on GCAM compared to the default cam.

Categories

Resources