Database Info

New Goophone I5S [Q] & [A] & Development Area

Hello!
I've created this thread to merge all the information i know about the new model of goophone: Goophone I5S
Specification:
- Dual Core MTK MT6577 1.0 Ghz Processor
- 4 Inch oneglass 854x480 Pixel display
- 512MB RAM
- 8GB Internal Storage
- 5.0 MP Rear Camera + 1.3 Front Camera
- Android 4.1.2
This a cheaper version of Goophone i5 Lite being the main differences the display, camara and internal storage.
The price of this phone is: $149.99
As soon as i get it home i'll post an tutorial how to root it and how to install google play.
Places where you can buy them:
Buy it from here (exceptional service) or from here (known by almost everyone)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
HOW TO ROOT IT
- Download this Batch
- Turn on USB debug
- Connect your phone to you pc via USB with the phone turned on.
- Run the RunMe.batch
- Select normal mode
- Wait until its rooted.
It will restart and then make sure that you accept the SU Request.
HOW TO FIX BLACK SCREEN ISSUE and increase Battery life
Open the build.prop file located inside system folder, scroll to the bottom and add this lines
Code:
#MANUXOSETTINGS
wifi.supplicant_scan_interval=180
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
HOW TO FIX 3G
- Download APN Manager Pro and Titanium backup pro (must be this apps.)
- With Titanium Backup set the APN Manager as System App
- Open the APN Manager
- Set up your carrier settings
- And that is it
STOCK SOFTWARE
CLICK HERE TO DOWNLOAD THE MT65XX USB DRIVERS
If all this information was useful for you, please don't forget to press the thanks button.
FLASH TOOL
CLICK HERE TO DOWNLOAD THE FLASH TOOL
Tutorial:
Download the flash tool
Extract it
Extract the stock rom
Open the SP Flash Tool
Load the scatter file from the ROM folder.
Turn off your phone
Press download button on the SP flash tool
Connect the phone via USB
The bars will start to progress. Wait until they finish and a green circle will pop up.
And that's it! You have now installed the stock software again.
USEFUL INFORMATION
1 - Switch Operating System Code: *#12369#*
Imput this code at dailing interface, the phone will switch operating system between original Android and iOS Theme.
2 - Access Factory Mode Code: *#*#3646633#*#*
This code is availble for most phones with MTK chipset, but please use this code carefully, because if you changed some referance, it will affect phone's feature.
3- Hold Home Button 3 seconds
When you hold the home button 3 seconds, the phone will appear on the screen three virtual buttons.
4- Double Click Home Button
Double click the home button, the screen will appear the apps you opened recently.
5- Hold Home Button 15 seconds
If your phone can't charging, or the system is dead, hold the home button for 15 second, the phone will restore to default factory status.
If all this information was useful for you, please don't forget to press the thanks button.
APPS THAT CAN BE DELETED FROM SYSTEM/APP FOLDER
- Opera
- Battery notification
- File Manager
- Easy Touch
- iFly - you can remove it easly.
- TongChoung.... - One that have an phone icon with chinese characters
- Baidu Search - That search icon with chinese characters
- Chinese Weather
- Baidu Maps
- Passbook
Do not remove GameCenter and mogoo market. Otherwise it will brick your phone
Some apps are inside /data/app folder
Any donation will be well recieved even 50 cents. This way you will be helping me to continue to work on this phone.
Notice that to help you out i also have costs. being the main one the electricity.
This month bill: 100 dolars. :x
DONATE​

Manuxo said:
As soon as i get it home i'll post an tutorial how to root it and how to install google play.
Click to expand...
Click to collapse
Hi,
Do you think your improved rom will also work on the I5 S? Or alternatively, do you intend to develop for this version of goophone as well?

whigga said:
Hi,
Do you think your improved rom will also work on the I5 S? Or alternatively, do you intend to develop for this version of goophone as well?
Click to expand...
Click to collapse
As soon as i get one i'll start to make a rom for it.
Regards

Goophone I5s - I need the stock rom..
My Goophone i5s bricked and I need the stock rom. Can anyone please please load the stock rom? Thanks in advance.

hi, im not sure about any of this info!
in the goophone.hk website, it says the i5s has 1 gb and is capable of 8800score in antutu.. it also says that the screen is the same as goophone i5 960x ...
it also says that is running a much smoother UI with 4.1.2 android..
but all the websites that you posted are selling a less powerfull i5s..
any ideas?

Im thinking to buy this phone but im not sure. 3G and wifi works well? regards!

Goophone I5s - I need the stock rom..
mstrkvsh said:
hi, im not sure about any of this info!
in the goophone.hk website, it says the i5s has 1 gb and is capable of 8800score in antutu.. it also says that the screen is the same as goophone i5 960x ...
it also says that is running a much smoother UI with 4.1.2 android..
but all the websites that you posted are selling a less powerfull i5s..
any ideas?
Click to expand...
Click to collapse
I can confirm that the i5s screen is not same as i5 because my i5s bricked and I have loaded the i5 rom and now, I lost the display.....the phone boots and you can hear the sound but on the screen I can only see different colors like rainbow. I need the stock rom to fix my phone...

how to install play store ?
received the phone today and quite impressed, but having problems figuring out how to install gapps and play store. has anyone had success with that ?

Goophone I5s - I need the stock rom..
art3s said:
received the phone today and quite impressed, but having problems figuring out how to install gapps and play store. has anyone had success with that ?
Click to expand...
Click to collapse
Yes I was able to load Play Store and rooted the phone. Just connect your phone to your PC and copy the play store .APK file from your PC to your phones internal storage. Open file explorer on your phone and install it. Here is the procedure to root your goophone:
http://forum.xda-developers.com/showthread.php?t=1886460

We need a good ROM
Hi all,
I'm in the same boat...
I've got it since a week (bought at android-sale, ).
The phone itself is really well made, excellent build quality.
The screen is really brilliant, and all is functionnal with a good reactivity and fluidity.
The iPhone theme is really good (I also got a real iPhone 5 so I can compare both )
Unfortunately, there is a lot of chinese crap... and no Google Play
I've read all other topics about others GooPhone but I think we can't flash any ROM from these other model (Y5, I5, ...).
I'm ready to test any compatible ROM

z_man3007 said:
Yes I was able to load Play Store and rooted the phone. Just connect your phone to your PC and copy the play store .APK file from your PC to your phones internal storage. Open file explorer on your phone and install it. Here is the procedure to root your goophone:
http://forum.xda-developers.com/showthread.php?t=1886460
Click to expand...
Click to collapse
thanks! managed to install all I need.
which of the Chinese apps could be uninstalled without breaking the phone's functionality?

Thanks.
Now rooted with Google PlayStore, it's better now!
Don't know how to destroy all bloatware from it now... (i'm quite a newbie with Android :silly and associate some icons to other apk...
PS: attached some funny pics from my unboxing xperience with the symptomatic Slide to unClock
I've also found some tips from Shine (android-sale) :
1. Switch Operating System Code: *#12369#*
Imput this code at dailing interface, the phone will switch operating system between original Android and iOS Theme.
2. Access Factory Mode Code: *#*#3646633#*#*
This code is availble for most phones with MTK chipset, but please use this code carefully, because if you changed some referance, it will affect phone's feature.
3. Hold Home Button 3 seconds
When you hold the home button 3 seconds, the phone will appear on the screen three virtual buttons.
4. Double Click Home Button
Double click the home button, the screen will appear the apps you opened recently.
5. Hold Home Button 15 seconds
If your phone can't charging, or the system is dead, hold the home button for 15 second, the phone will restore to default factory status.

goophone i5s
art3s said:
thanks! managed to install all I need.
which of the Chinese apps could be uninstalled without breaking the phone's functionality?
Click to expand...
Click to collapse
Don't uninstall any.... cause thats how I bricked my phone. Just wait for a STOCK rom to be available than you can do whatever you like. I already know how to load a rom on this phone but I can't find the STOCK ROM anywhere.

Hi z_man3007,
Did you try this?
If your phone can't charging, or the system is dead, hold the home button for 15 second, the phone will restore to default factory status.
Click to expand...
Click to collapse

goophone i5s
MonteCristoffOn said:
Hi z_man3007,
Did you try this?
Click to expand...
Click to collapse
Yes, I have tried that but nothing....if you hold the power button for 15 seconds it will turn your phone off. If you hold Vol - + Power Button, it will show you recovery menu but in the recovery menu you can select options using Vol - and Vol + but you cannot execute any command ... I have tried power button and home button nothing works. Thank you for your assistance.
Note: I did try holding the HOME button for 15 seconds nothing happens.
---------- Post added at 09:41 PM ---------- Previous post was at 09:16 PM ----------
Later, I will upload the drivers and step by step procedure.... how to load a rom on Goophone i5s. It needs a special flash tool to be used in order to flash or load a rom on this phone. Since, my phone is bricked, I have tried many different things, I have even installed rom from Goophone i5, since both model have different display, nothing shows on the screen except color like rainbow. The phone boots up fine its just that display wont work. If I press Vol - or Vol + button I can hear the volume going down and also going up. I desperately need the STOCK rom. Is there a way to extract the STOCK ROM from a functional Goophone i5s?

Hi guys, this is my first post on xda forum.
Goophone.hk doesn'tt sell this model anymore. You can check on theire's webpage.
Now they have I5S model with better specs. Here is the official video: "bangpai . taobao . com/group/thread/1287552-280921683.htm" (remove spaces)
Few weeks ago I saw I5S model with low screen resolution on goophone's website. But this was a short sale to sold these phones. Now they sells new I5S phones.

the gps works fellas?
cheers!

mstrkvsh said:
the gps works fellas?
cheers!
Click to expand...
Click to collapse
yes. works actually really well. I get a quick fix with g maps.
to my surprise the phone does not have 512mb ram as it was stated on android-sale, but 1gb!

Hi,
On the end of the day i will post here the stock software so you can reflash it if the things go bad.
Things i already tested.
- none of goophone y5 ROMS work on this model.
- none of goophone i5 lite ROMS/Firmware work on this model
- removing some chinese apps can brick your phone.
Things i will made shortly
- slide to unlock in english on all languages
- slide to poweroff in english on all languages
- iLauncher - iOS like
- Delete all the chinese apps
- Install al google services
- Fix the taskbar background
Then i will compile it on a new ROM and i will put it here so you can all download it
Download the stock rom here
There is already an tutorial on the first page teaching how to root it and how to install playstore.
If this information was useful for you please don't forget to press the thanks button.
Regards

Stuck on the boot logo
Hello i've tried to install the play store but with the root explorer I change the permissions to 777 dor the play store and I reboot the phone and now I'm stuck on the boot logo.
Please Help me

[RECOVERY] Clockworkmod Recovery for ZTE V967S

DISCLAIMER:
Rooting your phone and using custom Recoveries and ROMS have risks and may result in bricking your device, and has nothing to do with Google or the device manufacturers. In case of any mishap I am not responsible if you brick/ruin your phone in any way.
Basic computer skills are required and minimal knowledges about phones and phones utilities too.
Make sure that whatever you do, you are doing it at your own responsibility.
I built from source a CWM Recovery, version 6.0.4.4 adapted by me to build in cm-10.1 environment, for ZTE V967S phone. I have to say Thank you to C3C076 for his help. He was kind to help me to figure out how to tweak building source for recovery, to obtain a compatible recovery. So, you should thank him, or even better to donate to him if you can. Now I improved the MTK compatibility, I fixed restore old recovery issue.
The CWM 6.0.4.4 recovery can be downloaded from downloads section. If you care enough, and you like what I did, after download just hit the Thanks button. If you use it or port it and ask other to hit Thanks for you, do the same here to show respect for my work.​It is fully functional: it works for flash zip, to wipe, mount (both internal and external sdcard), backup, restore, format to factory from phone settings menu, apply updates from stock ROM, etc.​If you share my compiled recovery on other sites or forums, please give proper credits for it!

CREDITS and THANKS
C3C076 for his help on tweaking recovery source.
bgcngm for his wonderful tool for unpacking and repacking img.
rua1 for MTK Droid Root & Tools.
dsixda for his Android Kitchen.
Cyanogenmod Team for their wonderful project.
Koushik for creating Clockworkmod Recovery and for constant improvement of it.
-- You really should thank to all of these guys or if you can to donate to them, because without their hard and fine work, we couldn't enjoy our phones as we should.

If you choose to use these, you are doing that on your own risk, and I can not be held responsible for any damage you made to your phone.
1. SPFlashTool backup ROM
A SPFlashTool prepared backup from last stock version 1.0.0 - 27.08.2013 for NonChina Market, if you need to unbrick your phone, or if you want to revert to stock. This version has English as default, and also include Chinese and Russian. It has root and custom CWM, otherwise is untouched. You have to flash this one with SPFlashTools. The scatter file is included.
3. A version prepared from last LewaOS v5 - only English - LewaMax v2.
Rooted, optimized, gapps included. The ROM will not change your recovery.
INSTALL INSTRUCTION:
Many people have problems with force closed processes because they don't flash a new ROM properly.
- In recovery, mount USB Mass storage and delete from sdcard these folders:
.android_secure
Android
LOSTDIR
- then back in recovery do a wipe all data/factory reset in CWM or Pre-Flash wipe in COT
- in CWM in advanced menu wipe Dalvik cache / in COT in storage management menu wipe Dalvik cache
- Now flash the ROM zip.
ATTENTION:
For extending data partition please refer to this source. It's better than my previous modd and I think it's safer. Thank you meteos.But, I recommend you to use top 2.5 Gb data partition size, and let remaining 237 Mb for sdcard failure situations.​
Here you will find MTKDroidTools of rua1's.

carliv said:
1. A SPFlashTool prepared backup from last stock version 1.0.5, if you need to unbrick your phone, or if you want to revert to stock. It has only root, otherwise is untouched. I removed from that the preloader, since is a high risk to damage your phone using that. But if someone need it I will send him private. You have to flash this one with SPFlashTools. The scatter file is included.
2. An optimized ROM, prepared from 1.0.5 stock version, ZTE V967S ROM Max Flavour v-2. Slimed, odexed (about 60Mb apps on data usage), zipaligned, busybox, debloated, multilingual (sort of), and some other things. I replaced the Launcher with SOLOLauncher because is lighter (only 5-6 Mb instead of 20) and have more features. I've tested it and it works flawless. You should flash it with CWM Recovery.
3. Will come a version prepared from last LewaOS v5 for MIUI fans.
Click to expand...
Click to collapse
Good jobs :good::good:

carliv said:
- 2.5GB ZTE V967S P188F07 Max v2 full
Click to expand...
Click to collapse
Hi Carliv, thank you very much for your rom. I am trying it and I am quite happy with that. I am only experiencing some problem with GPS: in some cases I was not able to switch on or switch off the GPS. Another thing that looks a little bit strange is that in YGPS -> Information the "chip version" is "UNKNOWN". With the sock ROM I am sure that the information about the chip version was displayed (MTK_GPS_.....). Have you the same issue?
Ciao.

pierangelof said:
Hi Carliv, thank you very much for your rom. I am trying it and I am quite happy with that. I am only experiencing some problem with GPS: in some cases I was not able to switch on or switch off the GPS. Another thing that looks a little bit strange is that in YGPS -> Information the "chip version" is "UNKNOWN". With the sock ROM I am sure that the information about the chip version was displayed (MTK_GPS_.....). Have you the same issue?
Ciao.
Click to expand...
Click to collapse
No, I haven't any problem with GPS, and if you check GPS in YGPS with GPS switched ON it will show you chip version.
I don' understand where you can't swith on/off GPS: in quickpanel toggles, in settings locations... You don't say that. So, please, be more specific.
When I need GPS, I turn it ON, and it connects in about 3 sec. if I'm outside, or maybe 10 if I'm inside near a window.
Thanks for appreciations.
I'll try to help you if you give me more informations.
--------------------------later edit------------------
One other thing, I noticed that if you use scheduled power off/on, you have to manualy restart the phone after self turning on, because the WIFI and GPS doesn't work properly... I don't know why, and I think this is a bug in 1.0.5 version.

hello ,
thanks for your support in our phone ZTE V967S
i have bought the phone from minideal.net with 1.0.3 MULTILANGUAGE, rooted and google play store version and chinese CWM, but i want to install 1.0.5 version
and ENGLISH cwm. does your 1.0.5 version support full GREEK language?
how to install CWM Recovery 6.0.3.5??
you gave us the scatter file, the usb drivers for ZTE and the recover.img.
but HOW to use them? give us full details
As i can understand with SLIM version you do not have Google Play Store installed.
right?
i want to install SLIM version to have battery improvement but i am a little afraid if sth goes wrong (someone says that the GPS is not
working perfectly and maybe some important things are missing) what is your opinion for SLIM version in general? will i have a problem if i install SLIM
compared with FULL?
also i want the 5GB userdata partition.. how to manage that?
maybe i need first flash 2.5GB ZTE V967S P188F07 Max_v2
and then flash again Extend2_5GBUserData.zip
RIGHT?
can i do it directly ??

gvekiaris said:
hello ,
thanks for your support in our phone ZTE V967S
i have bought the phone from minideal.net with 1.0.3 MULTILANGUAGE, rooted and google play store version and chinese CWM, but i want to install 1.0.5 version
and ENGLISH cwm. does your 1.0.5 version support full GREEK language?
how to install CWM Recovery 6.0.3.5??
you gave us the scatter file, the usb drivers for ZTE and the recover.img.
but HOW to use them? give us full details
As i can understand with SLIM version you do not have Google Play Store installed.
right?
i want to install SLIM version to have battery improvement but i am a little afraid if sth goes wrong (someone says that the GPS is not
working perfectly and maybe some important things are missing) what is your opinion for SLIM version in general? will i have a problem if i install SLIM
compared with FULL?
also i want the 5GB userdata partition.. how to manage that?
maybe i need first flash 2.5GB ZTE V967S P188F07 Max_v2
and then flash again Extend2_5GBUserData.zip
RIGHT?
can i do it directly ??
Click to expand...
Click to collapse
You're welcome!
Now, let's see:
1. No ROM is full multilanguage, except the case that all apps have multilanguage support. Otherwise, my version is as much multilanguage as minideal version from what I've seen - I ported translations from a Lenovo P770 because is very much similar. You will have Greek just like in minideal version.
We can try togheter to make a better translation if other users want that; I can post here archives with xml files that have to be translated, you make translations, post here back and I could integrate them in a ROM. That way we can translate even SystemUI, which now isn't.
2. To install CWM the easy way is with SPFlashTools - all you need is the scatter and recovery.img. Of course, you have to install proper drivers before - you can find them in first post. How to use SPFlashTools I can't reproduce here because there are several guides on forum, here is one of them. Just one thing: if you find hard to enter the phone in bootloader, just remove the battery and connect the phone to computer without battery - it will enter in bootloader automate.
3. I don't have gapps in my phone SLIM ROM, but version posted to download has, because many of you use them - I don't. The GPS is working perfect for me, the only bug I found untill now, and don't think is related to my work, but to original release, is that if you use Scheduled power on & off, after phone starts from sleep you have to reboot manualy, otherwise Wifi and GPS won't work correctly. I hope they'll solve that in a next release like they did with camera flash. But, overall slim or full version shares the same drivers, modules and libraries, and only difference is in installed apps. The full version has stock launcher and weather, and live wallpapers, etc. The slim version don't have those things.
4. You can't use a 5GB userdata partition because the entire phone memory is 4GB. You can expand userdata to max. 2.7GB, but I provided a solution for 2.5, because in case o SDCard failure on mount/unmount or other event, the phone will use those 270 MB from internal storage to function properly until you fix sdcard, without losing data. There are some solutions to expand data partition on sdcard, but I didn't tried them and I can't say you how that works. My ROM with 2.5 GB support will repartition userdata for you during install, and when the phone boots up you will see internal storage 2.5 GB instead of 1GB.
Ok, That covers all your concerns. Thank you for appreciations.

1. for Greek Language i think i am ok... as i can understand you import multilanguage support from Lenovo P770. how minideal managed to have Multilanguage support for 1.0.3 ?
did they import from another phone too?
2. another solution to install English CWM recovery is with Mobileuncle MTK Tools. do you agree? but thanks for your help for SPFlashTools.
ZTE USB Driver.zip ,MT6589 drivers.zip, MT6589 USB VCOM drivers.7z. which of the 3 drivers to install in order my PC to recognize my
phone? how to enter CWM? what do i need to press?
3. i want to have your SLIM version but with Google Play Store installed. how can i do this?
Are we sure that the problem with WIFI and GPS not working correctly after phone starts from sleep (Scheduled power on & off) is a problem
of ORIGINAL version? maybe it is sth eith your rom.... can someone confirm that?
4. what is the purpose of Extend2_5GBUserData.zip ???
before i had Xperia Sole . because the internal available memory for installed apps and games was about 4 GB some people developed a
tool to swap the internal memory with the external SD card. in this way if someone has 16 GB external SD card he/she can install BIG games without capacity problems
http://forum.xda-developers.com/showthread.php?p=36452468
how to succeed such thing with ZTE V967S ?
carliv said:
You're welcome!
Now, let's see:
1. No ROM is full multilanguage, except the case that all apps have multilanguage support. Otherwise, my version is as much multilanguage as minideal version from what I've seen - I ported translations from a Lenovo P770 because is very much similar. You will have Greek just like in minideal version.
We can try togheter to make a better translation if other users want that; I can post here archives with xml files that have to be translated, you make translations, post here back and I could integrate them in a ROM. That way we can translate even SystemUI, which now isn't.
2. To install CWM the easy way is with SPFlashTools - all you need is the scatter and recovery.img. Of course, you have to install proper drivers before - you can find them in first post. How to use SPFlashTools I can't reproduce here because there are several guides on forum, here is one of them. Just one thing: if you find hard to enter the phone in bootloader, just remove the battery and connect the phone to computer without battery - it will enter in bootloader automate.
3. I don't have gapps in my phone SLIM ROM, but version posted to download has, because many of you use them - I don't. The GPS is working perfect for me, the only bug I found untill now, and don't think is related to my work, but to original release, is that if you use Scheduled power on & off, after phone starts from sleep you have to reboot manualy, otherwise Wifi and GPS won't work correctly. I hope they'll solve that in a next release like they did with camera flash. But, overall slim or full version shares the same drivers, modules and libraries, and only difference is in installed apps. The full version has stock launcher and weather, and live wallpapers, etc. The slim version don't have those things.
4. You can't use a 5GB userdata partition because the entire phone memory is 4GB. You can expand userdata to max. 2.7GB, but I provided a solution for 2.5, because in case o SDCard failure on mount/unmount or other event, the phone will use those 270 MB from internal storage to function properly until you fix sdcard, without losing data. There are some solutions to expand data partition on sdcard, but I didn't tried them and I can't say you how that works. My ROM with 2.5 GB support will repartition userdata for you during install, and when the phone boots up you will see internal storage 2.5 GB instead of 1GB.
Ok, That covers all your concerns. Thank you for appreciations.
Click to expand...
Click to collapse
---------- Post added at 02:42 PM ---------- Previous post was at 02:30 PM ----------
i can not understand what is LewaOS v5 ??? what are the differences with your modded rom?

gvekiaris said:
1. for Greek Language i think i am ok... as i can understand you import multilanguage support from Lenovo P770. how minideal managed to have Multilanguage support for 1.0.3 ?
did they import from another phone too?
2. another solution to install English CWM recovery is with Mobileuncle MTK Tools. do you agree? but thanks for your help for SPFlashTools.
ZTE USB Driver.zip ,MT6589 drivers.zip, MT6589 USB VCOM drivers.7z. which of the 3 drivers to install in order my PC to recognize my
phone? how to enter CWM? what do i need to press?
3. i want to have your SLIM version but with Google Play Store installed. how can i do this?
Are we sure that the problem with WIFI and GPS not working correctly after phone starts from sleep (Scheduled power on & off) is a problem
of ORIGINAL version? maybe it is sth eith your rom.... can someone confirm that?
4. what is the purpose of Extend2_5GBUserData.zip ???
before i had Xperia Sole . because the internal available memory for installed apps and games was about 4 GB some people developed a
tool to swap the internal memory with the external SD card. in this way if someone has 16 GB external SD card he/she can install BIG games without problems
http://forum.xda-developers.com/showthread.php?p=36452468
how to succeed such thing with ZTE V967S ?
Click to expand...
Click to collapse
I don't know how minideal got their translation, maybe they did it, it's not that hard, there are 4 files to translate to every language, and other 2 if you want SystemUI too, but you have to know a lot of foreign languages. That's the reason I said we can make a better translation, but everyone have to translate from English to his language.
Yes, you can install recovery with MobileUncle but you have to be rooted and to have MobileUncle installed. The way I presented works even for untouched stock ROM. Don't matter which order you install drivers. Install them all one by one, and connect phone in normal boot and wait for windows to install previous drivers for the new device, then connect phone in bootloader and wait again for windows to install necesary drivers.
The slim version posted here is with gapps included, you don't have to do anything for that - I thought I made myself clear. The version without gapps I kept it for me, I didn't share it. Most people want gapps and there was no reason to upload a version without them. No, I don't think that refresh for GPS and wifi has anything to do with my intervention, it's related to the way the phone enter to sleep and wake up, because is not completely shut down. My guess is that on wake up, not all modules are started properly, and that's the reason a phone restart solve the problem: when Android starts all modules are loaded correctly.
The purpose of Extend2_5GBUserData.zip is, as I said in that post, that people who don't want to install any of my ROM with 2.5GB support, to achieve an extended partition while they keep their ROM: minideal, stock original, or others not shared by me.
I know about that thing with extend to sdcard, but I didn't tried yet, and from what I've seen compiling recovery, for this phone you need to unpack, repack recovery.img and boot.img too, to modify fstab, not only that from etc folder. So, it's a little bit more complicated. Some people made some scripts for that for this kind of phones but for different cpu. I can't help you with this matter, because I'm not interested in it. For me 2.5GB of internal memory is more than enough.
LewaOS v5 is a different framework, more like MIUI, but with different launcher type. I did a debloated version, because LewaOS is mainly for China, and they have a lot of chinese apps. The people that download it they know what is. I used to like it, but now, the ZTE ROM, optimized please me more.

thanks for your help. I am really appreciate this. so if I want to extend my internal storage to 2,5 GB directly to minideal modded rom version I need to flash Extend2_5GBUserData.zip via CWM. right? there is no need to install first your modded version.
how to connect my phone in bootlader mode???
so you propose me to install lite version. I will give a try when my phone come to my hands!!!
one more question maybe not suitable for this thread but I wll ask you. do you know to propose me good screen protectors and slim caces for ZTE V967s? I heard that V987 quad uses the same protectors and caces with V967s. is it true?

gvekiaris said:
thanks for your help. I am really appreciate this. so if I want to extend my internal storage to 2,5 GB directly to minideal modded rom version I need to flash Extend2_5GBUserData.zip via CWM. right? there is no need to install first your modded version.
how to connect my phone in bootlader mode???
so you propose me to install lite version. I will give a try when my phone come to my hands!!!
one more question maybe not suitable for this thread but I wll ask you. do you know to propose me good screen protectors and slim caces for ZTE V967s? I heard that V987 quad uses the same protectors and caces with V967s. is it true?
Click to expand...
Click to collapse
Ok.
I don't use any screen protector. The screen is Gorilla Glass and you can't scratch it even if you want. Actually I can't find that info now, I've read that ZTE support answer that to a user. On official description is an IPS screen. But seems to be very hard. I've tested it with door key, really :good:
And the case... Mine came with some sillicone cheep case, I don't like it. I don't know if the case from v987 fits, because I know that v987 is 0.7mm thinner.

so you have this phone and you bought it from minideal.net. right?
you make me happy. but I am not sure for Gorilla Glass. the specifications does not mention that. and Greek guys say that is normal glass not Gorilla. are you sure for that? if you use your nails it will not scratch the screen.
also you have not answered me for Extend2_5GBUserData.zip
can I flash it directly to minideal modded version or is it necessary to flash your rom first?
about a slim case fitted exactly to our phone do you have sth in your mind to buy ?
also how do you find the photo and video quality of the camera?
thanks for all. you are great
carliv said:
Ok.
I don't use any screen protector. The screen is Gorilla Glass and you can't scratch it even if you want. I've tested it with door key, really :good:
And the case... Mine came with some sillicone cheep case, I don't like it. I don't know if the case from v987 fits, because I know that v987 is 0.7mm thinner.
Click to expand...
Click to collapse

gvekiaris said:
so you have this phone and you bought it from minideal.net. right?
you make me happy. but I am not sure for Gorilla Glass. the specifications does not mention that. and Greek guys say that is normal glass not Gorilla. are you sure for that? if you use your nails it will not scratch the screen.
also you have not answered me for Extend2_5GBUserData.zip
can I flash it directly to minideal modded version or is it necessary to flash your rom first?
about a slim case fitted exactly to our phone do you have sth in your mind to buy ?
also how do you find the photo and video quality of the camera?
thanks for all. you are great
Click to expand...
Click to collapse
Ok, I modified that to official infos, IPS screen. I've read that in an email support answer from ZTE, but I can't find now the source.
About Extended 2.5 GB I already told you two times, you can use it with any ROM, or to be specific: you can flash it on your minideal ROM.
...
The same steps for those who want only to increase userdata partition, without installing any of my ROM. But you have to download Extend2_5GBUserData.zip from attachments....
Click to expand...
Click to collapse
...The purpose of Extend2_5GBUserData.zip is, as I said in that post, that people who don't want to install any of my ROM with 2.5GB support, to achieve an extended partition while they keep their ROM: minideal, stock original, or others not shared by me....
Click to expand...
Click to collapse
Damn, I thought my English wasn't that bad... Hm... I wonder, there are out there other people who don't understand me too?
I don't know any case because I don't use one, but I read somewhere, I don't remember where, about a leather case for it. I don't know more.
The camera is average, but I didn't expect much from it, I have a DSLR camera for photos.
Cheers.

sorry my friend. just wanted to be sure !!!! sorry if you repeat some things twice for me.
in what way do u extend the data size up to 2,5 gb ? is it dangerous for the phone or does it has any effect to the performance and speed of the phone?
about the screen I have read in the official specifications that it is IPS and not Gorilla glass.
but first as you said somewhere read that it is Gorilla. and secondly you tried with your nails and key to scratch the screen without damages. if the screnn was just IPS this would never happened. what to say?????
I am a little sad with the picture quality!!! never mind.
thanks
carliv said:
Ok, I modified that to official infos, IPS screen. I've read that in an email support answer from ZTE, but I can't find now the source.
About Extended 2.5 GB I already told you two times, you can use it with any ROM, or to be specific: you can flash it on your minideal ROM.
Damn, I thought my English wasn't that bad... Hm... I wonder, there are out there other people who don't understand me too?
I don't know any case because I don't use one, but I read somewhere, I don't remember where, about a leather case for it. I don't know more.
The camera is average, but I didn't expect much from it, I have a DSLR camera for photos.
Cheers.
Click to expand...
Click to collapse

gvekiaris said:
sorry my friend. just wanted to be sure !!!! sorry if you repeat some things twice for me.
in what way do u extend the data size up to 2,5 gb ? is it dangerous for the phone or does it has any effect to the performance and speed of the phone?
about the screen I have read in the official specifications that it is IPS and not Gorilla glass.
but first as you said somewhere read that it is Gorilla. and secondly you tried with your nails and key to scratch the screen without damages. if the screnn was just IPS this would never happened. what to say?????
I am a little sad with the picture quality!!! never mind.
thanks
Click to expand...
Click to collapse
Well, the method for repartitioning is presented here by meteos. You just need to modify in hex editor some values for Extended Boot Records EBR1 and EBR2. It's not dangerous if you don't make mistakes and enter some values that extend userdata more than 2.7 GB, and that wipe some portion of primary partition. In that case you will have a bricked phone and you can repair it, only by reflashing entire ROM in SPFlashTool.
EBR is for logical partition (userdata, phone storage or internal sdcard) and MBR for primary partition (Boot, Recovery, System..).
My archives are safe, and I've tested both myself without any problem. I'm using now a slim ROM with 2.5GB userdata (internal memory).
You're welcome.

thanks for your help.
you are always helpfull.
if you have any news for new scripts which swap the internal memory with our external SD card memory just inform us..
did you try to play heavy games? does the phone play them smoothly?
if you increase the storage to 2,5 gb what do you choose in storage option : auto , sd or internal storage?
a greek friend of me tried your SLIM rom. he said it is very LIGHT and FAST. But he has problem to select GREEK keyboard. he selects greek keyboard but the choice can not be saved. please try to fix this!!!
carliv said:
Well, the method for repartitioning is presented here by meteos. You just need to modify in hex editor some values for Extended Boot Records EBR1 and EBR2. It's not dangerous if you don't make mistakes and enter some values that extend userdata more than 2.7 GB, and that wipe some portion of primary partition. In that case you will have a bricked phone and you can repair it, only by reflashing entire ROM in SPFlashTool.
EBR is for logical partition (userdata, phone storage or internal sdcard) and MBR for primary partition (Boot, Recovery, System..).
My archives are safe, and I've tested both myself without any problem. I'm using now a slim ROM with 2.5GB userdata (internal memory).
You're welcome.
Click to expand...
Click to collapse

gvekiaris said:
thanks for your help.
you are always helpfull.
if you have any news for new scripts which swap the internal memory with our external SD card memory just inform us..
did you try to play heavy games? does the phone play them smoothly?
if you increase the storage to 2,5 gb what do you choose in storage option : auto , sd or internal storage?
a greek friend of me tried your SLIM rom. he said it is very LIGHT and FAST. But he has problem to select GREEK keyboard. he selects greek keyboard but the choice can not be saved. please try to fix this!!!
Click to expand...
Click to collapse
Ok, sorry for late answer. I was busy to update recovery to 6.0.3.6 version.
Now, I don't have time to play games, I never installed one in my phone, so.. I don't know how they work in it.
The increased storage is for memory (if you install heavy apps which needs a lot of memory, they use that as virtual memory). I select always sdcard in storage options as default.
I don't know why your friend has trouble to set greek keyboard. I selected it, test it, reboot phone - still there. To select: Settings - Language & Input - KEYBOARD & INPUT METHODS - Android keyboard settings - select only languages you use and deselect others - go back - Default - select Greek - exit - done.
I know it's light and fast, I wanted to be.

LewaOS.. can you port a asop like rom? like bgcngm v970 is very good..

god_md5 said:
LewaOS.. can you port a asop like rom? like bgcngm v970 is very good..
Click to expand...
Click to collapse
LewaOS is not ported, it's only optimized.
The stock optimized version is on aosp base.

RCA RCT6203W46 Pro10 Tablet: Catch-all Thread

Fellow Pro10 6203 users:
Welcome! As we do not yet have a forum dedicated to this device, I am creating this thread to serve as a means to share everything that I've come to discover about the usage of this inexpensive yet capable Android tablet. This thread will include varying topics such as rooting, custom recovery, accessories, customization apps, custom ROM's, and anything else I might come across that may enhance our experience with the product. I have found no real one-stop source for information concerning this device, so I am beginning this one that I hope everyone that owns one will find useful. Please feel free to ask questions and add constructive commentary
Tech Specs:
Model Number: RCT6203W46KB
Operating System: Android 4.4.2
CPU Chip: Quad Core
CPU Chipset Model Number: MTK MT8127 1.5GHz
GPU: Mali-450 MP
Resolution: 1024x600
Density: 160dpi
Screen Features: 10.1 Thin-film Transistor
RAM: 1GB
RAM Type: DDR3
Storage Capacity: 16GB
Camera: Yes (Front & Back)
Camera Specifications: Front Facing 0.3M pixel webcam (640x480), Rear 2M pixel webcam (1600x1200)
Battery Life: 6 hours
Battery Life Details: Playback downloaded video with WiFi turn off
Connectivity/Audio: Headphone jack, Micro USB, DC jack, Micro HDMI
Dimensions: 262(W)x165(H)x11.5(D)
Weight: 921g
Software: Walmart, Sam's Club, Vudu, eMusic, Kingsoft Office
Included Accessories: Power adapter, Keyboard Folio
If you happen to find something here worth your while, please hit the thanks button!

Rooting
Always remember, you root your device AT YOUR OWN RISK. Rooting will void your warranty and you may brick your device in attempting this. Its a choice and you're the only one who can make it.
Rooting instructions (tested up to RCA firmware 1.9.50):
(Beginning with a tablet never before rooted, or has been completely unrooted prior)
1. On your tablet, go to Settings > About tablet > Build number and tap the build number 7 times. This will unhide the Developer options menu.
2. Tap the Developer options menu. Enable it by sliding the slider to the right in top bar. Select "USB debugging" by placing a check mark in the box next to it.
3. Go to Settings > Security. Select "Unknown sources" by placing a check mark in the box next to it. Deselect "Verify apps" by removing the check mark in the box (you can enable it again afterwards if you wish).
4. Connect your tablet to PC via USB.
5. Download the Windows iRoot rooting application here.
6. Install the app.
7. Start iRoot and follow instructions to root. Remember to enable USB permissions on tablet when prompted.
8. Once successfully completed, download and install SuperSU from here to replace the Chinese root manager called Superuser 1.0.4.
9. Start SuperSU and you will be asked for permission, choose to allow.
10. SuperSU will prompt to install SU binary, go ahead with OK and install normally (not TWRP). IT IS VERY IMPORTANT TO INSTALL THE BINARY.
11. Once SuperSU is installed and the binary updated, you can uninstall Superuser 1.0.4 and the second app it installs, something like "Clean Master" (unless you want it).
Happiness is now achieved with having a rooted device
* For further details regarding root, please see "Rooting considerations" in the Misc. section below.

Custom Recovery
Always remember, you install a custom recovery on your device AT YOUR OWN RISK. Installing a custom recovery will void your warranty and you may brick your device in attempting this. Its a choice and you're the only one who can make it.
99% of the credit for this section goes to johnemc2, PatF and mexicandroid for creating and contributing to this thread. Although it was created for a different but similar RCA tablet model, they provided everything I am going to reiterate here. Also the original thread for TWRP on MediaTek devices (which is the chipset for these RCA tablets) is here, and all credit goes to yuweng for this. Make sure to hit the thanks button in the respective threads for these guys!
TWRP installation instructions (tested up to RCA firmware 1.9.50):
1. Device must be rooted. See rooting section above or use another method of your choice.
2. Download the TWRP recovery image for the 6203 from here. Rename it by deleting "[RCA 6203 TWRP - Remove this tag]" so that the file name reads only "recovery.img" (with no quotes of course).
3. Place this file on your external sdcard.
4. Download and install [ROOT] Rashr Flash Tool from here. If the app suggests updates, go ahead and install them.
5. Rashr will ask you to make a backup. If you try, it will fail. Not to worry too much though, a stock recovery image is available below.
6. Start Rashr. From the menu, tap Recovery from Storage. From the "Pick a file" menu select /storage/emulated. Select /storage/, then select sdcard1/. From there select the recovery.img file you saved in step 3.
7. It will give you a warning prompt asking if you are sure. If so, select "Yes please" to install TWRP.
8. Upon successful flashing of TWRP you will have the choice to boot into the custom recovery, go check it out!
9. One procedural maintenance item to perform after: I have noticed that the rashr app holds on to a large amount of data for some reason and haven't found the need. Once you reboot, you can go into Settings > Apps > All and find Rashr and clear data to reclaim the space.
Good guide for using TWRP can be found here.
How to manually get into recovery (TWRP or stock):
From a powered off state, simultaneously depress the power and volume up buttons until the white RCA boot screen appears. Once this screen appears, release the power button but REMAIN DEPRESSING THE VOLUME UP BUTTON until you are in recovery.
Stock recovery installation:
It is the exact same procedure as was with TWRP, with the exception of step 2. Instead download the stock recovery image from here, rename it by deleting "[RCA 6203 Stock Repacked - Remove this tag]" so that the file name reads only "recovery.img" (with no quotes of course). Continue on using step 3 above. Check out why you might need the stock recovery image in the "Firmware updating considerations" area of the Misc. section below.
Ultimate happiness and assurance is now achieved with having a custom recovery installed on your device to back it up!

Accessories
Here are some of the accessories I am currently using for the 6203:
Cases:
The keyboard case is good, but I found it cumbersome in most cases and unnecessary. So I purchased this case from Ebay. Here are some photos of mine. I have had it for 5+ months with no issue upon daily use.
Screen Protectors:
I purchased this anti-glare and anti-fingerprint screen protector from Amazon. Although they now have it for the 6203, at the time they only had them for the 6103 and I had to modify it. But 5 months later it is still great. Being anti-glare means there is a slight matte to them, but overall I found it hardly effected the clarity of the screen. It really kept having to wipe off the screen due to fingerprints to a minimum!
I am just sharing what I have found to work for our devices and hope it helps you too in some way!

Customization Apps
Customization apps that require root (seeing rooting section above):
Xposed Framework. Man is this awesome. Here is the description from the site: Xposed is a framework for modules that can change the behavior of the system and apps without touching any APKs. That's great because it means that modules can work for different versions and even ROMs without any changes (as long as the original code was not changed too much). It's also easy to undo. As all changes are done in the memory, you just need to deactivate the module and reboot to get your original system back. There are many other advantages, but here is just one more: Multiple modules can do changes to the same part of the system or app. With modified APKs, you to decide for one. No way to combine them, unless the author builds multiple APKs with different combinations. You can find version 2.6.1 for our tablet here (select "show older versions" at the bottom of the page).
GravityBox [KK]. TONS of customization for our device. Find it here.
Customization apps that do not require root:
Blacked out or inverted apps. I love darkened apps. I prefer a black or dark background to most apps. It looks good and is easier on the eyes! You can download the Team Blacked Out updater apk from here. You can download many popular apps that have been "blacked out" by this team.
I am just sharing these apps for fellow fans of customization. Enjoy!

Custom ROM's
[reserved]

Misc.
Rooting considerations:
Although there is a risk of bricking the device in doing so, to date I have rolled through both the 1.3.51 and 1.9.50 RCA updates without the update being hindered by having my device rooted prior (never unrooted), and I have not lost root once the update completes. Although I have not tried this without, I believe this may be because I use SuperSU Pro OTA survival. This app is not necessary, but the free version does not have the "OTA survival mode" that the pro version possesses. I recommend spending the $3.75 for purchase.
Firmware updating considerations:
If you delete any of the bloatware apps that comes preloaded (VUDU, Walmart, Sam's Club, Opera, etc.) and try to update the device, it will soft brick your tablet. This is because the update performs a core app comparison check to test validity prior to completing installation. You will only be able to get into stock recovery once this happens. Therefore my recommendation is not to delete any of these apps but instead use Titanium or MyBackup Pro to freeze them, and prior to attempting any firmware update remember to UNFREEZE THEM FIRST. This will save you any headache with the firmware updates.
I do not think you can install an official firmware update via TWRP, so you may need to reinstall the stock recovery to do this. See the "Custom Recovery" section above.

Misc. #2
[reserved]

One frustrating thing about our device is that some apps will not install from the Play store. It will state "this item is not compatible with your device". Well I have tried many methods to circumvent this, including changing prop files and using apps that fake screen densities. I don't recommend that . Instead I sideload. I use a Google Chrome extension called APK Downloader. You can get it here. To set up it will ask for devide ID info. I plug in the number for my S4. Once downloaded, I just copy the apk over to my tablet and install from there. The only caveat to this is that it does not work for purchased apps.
There are other ways to procure the app and sideload, but this is the method I use most often for the 6203.

I have a support request in to RCA for these concerns (here is the text as I sent):
Hello,
I have 3 questions. The first is that by reading the specs for this tablet the CPU is supposed to be set for 1.5Ghz. But when you use the tablet, it is only set for 1300Mhz (1.3Ghz) (I can provide screenshots). Which is wrong and why?
My second question is do we have any access to a complete firmware ROM that can be used via recovery? This would be nice to have in case the tablet is soft bricked for any reason. Update ROMs do not provide this.
Lastly, is there anywhere to download USB drivers for this tablet?
Thanks in advance for your help.
From RCA:
Glen (RCA Support)
Apr 27, 3:18 PM
1) The max threshold is 1.5Ghz. The reason it is running at 1.3 is probably because your not using its absolute full capacity
2) We dont have the ROM
3) Is this for the USB stick or memory stick?
Glen
Technical Support
#Madeforyourlifestyle
My response:
Glen,
Here are my responses:
1. I have attached 3 screenshots from independent apps that all report the CPU set for 1.3Ghz and not 1.5Ghz. In fact they show the governor as having the range for the CPU set to 598-1300mhz. I believe this happened in the firmware 1.9.50 update and was not the case prior. Can you check to see why this was done? We purchased tablets that were intending on having a 1.5Ghz processor.
2. You will see many returns then from tablets that were soft bricked due to the most recent update corrupting the system file, and then only allowing people to boot into recovery and not into Android.
3. No, USB drivers as in this explanation: http://developer.android.com/tools/extras/oem-usb.html
Thanks. I really appreciate your assistance with these questions. Please let me know if there is any other information I can offer.
From RCA 5/4/15:
Glen (RCA Support)
May 4, 3:43 PM
The tablet will use the 1.5Ghz only when it will take big update like firmware updates.
#Madeforyourlifestyle
My response:
Glen,
There is no way for the Android kernel to know only to use full CPU capability during an upgrade procedure. Its there for all operations or it is not.
Can I have my concern escalated to your engineering team? As I said previous, the system showed 1.5Ghz was available in processing speed before the last upgrade.
Thanks
From RCA 5-7-15:
Hello,
We'd love to hear what you think of our customer service. Please take a moment to answer one simple question by clicking either link below:
How would you rate the support you received?
Good, I'm satisfied
Bad, I'm unsatisfied
Conclusion:
So apparently RCA doesn't intend to do anything about the most recent update failures outside of performing RMA's for people, and also doesn't care to answer why these tabs are advertised as 1.5Ghz and are being throttled to 1.3.

Rct6203w46-android4.4.2-3101-v50-v1.3.71
What can I do with this or this - no ROM Backups, and an annoying 'brick' on my table?
I successfully rooted with KingRoot and tried to manually switch to SuperSU with a script I found.
The script seemed workable. I found all of the targets and: # root.sh ... oh *hi*
The transition failed and after trying to 'clean up' remnants the script seemed to have missed, the screen froze: RESET BUTTON - nothing, nothing, nothing.
I wish I hadn't believed it would work without a 'dd ... system.img'. The tablet had about 12hrs mileage and is now a very new [Black Friday] $49 item about to be smashed on the driveway.
I read somewhere that RCA will not be distributing winusb drivers.
*uc* it - i b-roke i-t! :victory:
It's Alive! After the battery drained, 2 weeks later, it booted!
removed supersu

probeafargavin said:
What can I do with this or this - no ROM Backups, and an annoying 'brick' on my table?
I successfully rooted with KingRoot and tried to manually switch to SuperSU with a script I found.
The script seemed workable. I found all of the targets and: # root.sh ... oh *hi*
The transition failed and after trying to 'clean up' remnants the script seemed to have missed, the screen froze: RESET BUTTON - nothing, nothing, nothing.
I wish I hadn't believed it would work without a 'dd ... system.img'. The tablet had about 12hrs mileage and is now a very new [Black Friday] $49 item about to be smashed on the driveway.
I read somewhere that RCA will not be distributing winusb drivers.
*uc* it - i b-roke i-t! :victory:
It's Alive! After the battery drained, 2 weeks later, it booted!
removed supersu
Click to expand...
Click to collapse
probeafargavin,
Sorry for slow reply. Been a busy month! I recommend sending the unit back to RCA for an RMA. I had to do this once and although it took a month, I received back a working tablet. It doesn't matter that you did this, they will not check. They will end up sending you back a refurbed tablet. Mine works fine.
-droidify

Needing Help
I rooted my device (same exact make/ model you have listed). Well it just so happens that now I am not able to open the Google App store. I have clicked the app logo so many times now and all what I see is what looks like the app is about to open but it just disappears about a half second later.
Looks like I am no longer able to use the back button also. I have tried factory resetting the device yet problem remains. Clearing cache of the Google Play app, no results. Please help!!!!! I would surely appreciate it, I'm sure you can imagine how devastated I am over this.

C_Cee said:
I rooted my device (same exact make/ model you have listed). Well it just so happens that now I am not able to open the Google App store. I have clicked the app logo so many times now and all what I see is what looks like the app is about to open but it just disappears about a half second later.
Looks like I am no longer able to use the back button also. I have tried factory resetting the device yet problem remains. Clearing cache of the Google Play app, no results. Please help!!!!! I would surely appreciate it, I'm sure you can imagine how devastated I am over this.
Click to expand...
Click to collapse
C_Cee unless you have TWRP installed and had a back up, there is not much you can do. I would RMA the tablet through RCA. I had to do this once and it was a pretty quick turn around.
-Droidify

RCT203W46L Questions
Hi,
I have just purchased the above and rooted it with Kingroot. This is the lollipop 5.0 version.
a) a stagefright detector from lookout reports this device is vulnerable to this hack. Any thoughts?
b) are the twrp and stock recovery images pointed to by droidify post #2 and #3 still usable? even though its lollipop5.0?
Any help appreciated before I mod this thing!!
Thanks

kwmike said:
Hi,
I have just purchased the above and rooted it with Kingroot. This is the lollipop 5.0 version.
a) a stagefright detector from lookout reports this device is vulnerable to this hack. Any thoughts?
b) are the twrp and stock recovery images pointed to by droidify post #2 and #3 still usable? even though its lollipop5.0?
Any help appreciated before I mod this thing!!
Thanks
Click to expand...
Click to collapse
Lollipop is going to have a different recovery, so what I posted likely will not work and may cause serious problems if attempted. Not sure about stagefright vulnerabilities.

Any advance?
No more advance in this device?

drakedalfa said:
No more advance in this device?
Click to expand...
Click to collapse
My tablet is still going. Although not my daily driver device, I use it to watch videos on break at work and to read on. There hasn't been any development for this device that I am aware of and unlikely to be considering it is not that popular.

Flashing recovery from build Build: RCT6303W87DK-ANDROID5.0-V63-V1.12.20-B
kwmike said:
Hi,
I have just purchased the above and rooted it with Kingroot. This is the lollipop 5.0 version.
a) a stagefright detector from lookout reports this device is vulnerable to this hack. Any thoughts?
b) are the twrp and stock recovery images pointed to by droidify post #2 and #3 still usable? even though its lollipop5.0?
Any help appreciated before I mod this thing!!
Thanks
Click to expand...
Click to collapse
Aloha -
I just received one of these today:
Model: RCT6303W87DK (32GB)
Android version: Lollipop 5.0.
Kernel: 3.10.54
Build: RCT6303W87DK-ANDROID5.0-V63-V1.12.20-B
I installed NewKingrootV4.62_C133_B233_en_release_2015_11_24_105203.apk downloaded from www\.kingroot\.net
On the first attempt, Kingroot rebooted at 22%, and failed to root. I repeated the procedure without rebooting, and achieved root on the second attempt.
I am curious to know if you flashed TWRP and, if so, what results you had.
Also: does anyone know if, in fact, the 5.0 loader actually is different from the 4.4.2 loader.
Thanks in advance.

I'm confused, is this thread on the RCA Pro 10 RCT6203W46KB or for it's successor (I assume) the RCA 10 Viking Pro RCT6303W87DK. I ask because I have the RCT6303W87DK and am looking to see if there are any ROMs for it, as I would prefer to be running Android 5.1.2 or 6.0 over 5.0.

Lenovo S8 A7600 [Official Rom] [Instructions]

Hello
Seeing there is very little info about this model, I decided to make available my findings. Initially I was a bit annoyed with the phone in the start. The "stock" rom was a disaster (malware-ridden, non-official). First I tried to de-bloat that but the whole rom was just bad and unstable. Since then I've learned some things, and newer official builds have surfaced.
Also I should say; this phone is basically a K3 Note with 720p screen (another difference is MT6752M cpu instead of MT6752 in the K3 Note) and it's very similar to the A7000 model.
The best rom I have tried so far is this : VIBEUI_V2.5_1532_5.1797.1_ST_A7600_CU ---> DL - This is latest official stock Rom for the 7600 (not 7600M which is Chinese version)
Here is also TWRP recovery with english + chinese language: DL
Rename ROM to "update.zip", use stock recovery and flash (probably best to use stock lenovo recovery first to make sure everything gets flashed, can be flashed with twrp but I suspect it only flashes boot and system), boot it up, finish the setup wizard, turn it off. Use SPflashtool to flash TWRP, turn off again.
Start phone in recovery mode (Press volume Up + Down, and power button. Hold until recovery appears). Now you can flash Gapps (arm64, lollipop 5.0, opengapps.org), SuperSU, xposed arm64 lollipop, etc.
I have been able to get a very pleasing phone doing this. I don't really feel right now that much is missing, and I'm not annoyed by various other problems. Using xposed modules gravity box, GEL settings, Lollipop memory fix, etc.
This Rom has very little bloatware, there are some chinese apps, but they can easily be uninstalled - don't even need root. There are a few more you can uninstall using root if you want, but be careful not to break the system.
I'm not going to explain everything in great detail here. Using SPFlashTool is explained so many other places. Getting supersu and xposed also explained everywhere.
If I could I would integrate all in to one flashable package, but I'm not a rom cooker. Sorry
PS: As you can see in the image, i use iFONT xposed. But I don't enable it as xposed module, that caused problems. I just used it to download a font and applied it. It's system wide, and it works
There's a newer link in post #6 with the latest firmware
There's a newer link in post #10 with TWRP 3.0.2.3

Hi,do you have custom rom for lenovo s8 a7600?

askermk2000 said:
Hello
The best rom I have tried so far is this : VIBEUI_V2.5_1532_5.1797.1_ST_A7600_CU ---> - This is latest official stock Rom for the 7600 (not 7600M which is Chinese version)
Here is also TWRP recovery with english + chinese language:
Click to expand...
Click to collapse
sorry, I had to remove your links, because I have small amount of posts and I am not allowed to submit post with urls - even if quoted.
Hi!
Do you know way to install other languages into ROM (or add them and somehow rebuild ROM), I am searching informations for last few days with no succes. The main problem is when international apps using EN for directory, when all information in directory should be in my language (polish). Changing locale helps, but settings are crashing with changed locales..
Also I installed xposed, but system tells me that xposed is not installed... I heard about it from your post and found only version v79 for sdk 21. I need to remove search box from desktop at google now.

Any custom rom for this device ?

Hi everyone, hi @askermk2000
I just received my Lenovo S8 A7600 "Golden Warrior" phone from an Asian vendor, it came with VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU and SuperSU was seemingly installed when I first turned on phone (asked me to update binary).
Specs are MTK6752M 64-bit OctaCore, 2GB RAM, 8GB storage.
Can I install your version VIBEUI_V2.5_1532_5.1797.1_ST_A7600_CU through the Lenovo stock recovery/flash (phone) as you suggest?
You mention "not 7600M" so I am not sure...
I also see in other places that there's even a newer VibeUI version VIBEUI_V2.5_1537_5.1978.1_ST_A7600_CU, any idea where to get it and if it is compatible? I cannot find any download link...
Thanks...

konsti said:
Hi everyone, hi @askermk2000
I just received my Lenovo S8 A7600 "Golden Warrior" phone from an Asian vendor, it came with VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU and SuperSU was seemingly installed when I first turned on phone (asked me to update binary).
Specs are MTK6752M 64-bit OctaCore, 2GB RAM, 8GB storage.
Can I install your version VIBEUI_V2.5_1532_5.1797.1_ST_A7600_CU through the Lenovo stock recovery/flash (phone) as you suggest?
You mention "not 7600M" so I am not sure...
I also see in other places that there's even a newer VibeUI version VIBEUI_V2.5_1537_5.1978.1_ST_A7600_CU, any idea where to get it and if it is compatible? I cannot find any download link...
Thanks...
Click to expand...
Click to collapse
Hello
It's wise of you to remove that dubious vendor firmware.
Since "A7600M" is a model number, or simply name of the phone, I would be surprised if it doesn't say so anywhere. Look at the packaging, phone and battery compartment etc. If you don't see A7600M anywhere, it's likely not that model.
See here: Lenovo Inquiry Page
At the bottom there you'll find link for the latest official (Full) firmware.

Thank you @askermk2000 for your kind and immediate reply.
This known asian vendor on their page mentions: Lenovo "Golden Warrior" S8 A7600, 4G, LTE, MTK6752M @1.5GHz 64bit OctaCore, 2GB RAM, 8GB storage, 5.5inch HD IPS screen, OTG, Android 5.0 Phone
In settings, the ROM version is: VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU, no bloatware; was surprised to see SuperSU pre-installed but the vendor does have a service (at a cost) to provide pre-rooted phones (which I did NOT order but maybe got).
The (Lenovo) box doesn't mention much, even under the phone I can see a lot of Chinese, so it's definitely for China -- vendor wrote it's unlocked for world use on their page.
The mentioned model is A7600 on the rear, there's only a A838 reference besides model (i.e. QQ-A838-xxxxxx) but not much more than that.
I suspect these may be older stock they wanted to get rid of.
As you can see, the model is (S8) A7600, not A7600M. The chipset has "M" i.e. is MTK6752M.
So can I not use the official latest (full) firmware that you posted, via stock recovery?
Is this not for MTK6752M processor? Will this firmware brick the phone, you think?
Thank you very much in advance!

konsti said:
Thank you @askermk2000 for your kind and immediate reply.
This known asian vendor on their page mentions: Lenovo "Golden Warrior" S8 A7600, 4G, LTE, MTK6752M @1.5GHz 64bit OctaCore, 2GB RAM, 8GB storage, 5.5inch HD IPS screen, OTG, Android 5.0 Phone
In settings, the ROM version is: VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU, no bloatware; was surprised to see SuperSU pre-installed but the vendor does have a service (at a cost) to provide pre-rooted phones (which I did NOT order but maybe got).
The (Lenovo) box doesn't mention much, even under the phone I can see a lot of Chinese, so it's definitely for China -- vendor wrote it's unlocked for world use on their page.
The mentioned model is A7600 on the rear, there's only a A838 reference besides model (i.e. QQ-A838-xxxxxx) but not much more than that.
I suspect these may be older stock they wanted to get rid of.
As you can see, the model is (S8) A7600, not A7600M. The chipset has "M" i.e. is MTK6752M.
So can I not use the official latest (full) firmware that you posted, via stock recovery?
Is this not for MTK6752M processor? Will this firmware brick the phone, you think?
Thank you very much in advance!
Click to expand...
Click to collapse
No, your phone is the right model, as you said "Unlocked for world use", the A7600M only works in china.
MTK6752M is the chipset used - it has nothing to do with A7600M, that there are two M's there is a coincidence.
So you can go ahead and use the latest firmware.

OK for the sake of information to everyone, I did the following:
0. Formatted SD card from within the phone (just to be sure). Then charged battery fully to 100%.
1. Copy (via PC) the latest firmware zip file (currently is VIBEUI_V2.5_1628_5.2186.1_ST_A7600_CU_WC5DAF1811.zip about 1GB size) to root of my SD card. This file looks like a recovery type, but files inside (some IMG, DAT and scatter files) could be flashable from PC (i.e. like SP Flash Tool etc.).
2. Renamed it update.zip
3. Put SD and battery back to phone.
4. Started phone in recovery mode: Pressed Volume Up + Down and Power buttons simultaneously; held them until recovery screen appeared. First, Lenovo logo, then a screen to choose language (Chinese/English); pressed English.
5. Selected the Install Upgrade Pack menu and pressed "YES" to the warning about encrypted phones.
6. Waited for update with circle-type update progress; for some reason it got seemingly stuck at 75% for some period. Waited patiently to finish.
7. I selected "Back" to go and clean user data.
8. Once done, I pressed back touch-button and selected "Restart".
9. Waited to see what happens. Was curiously greeted with a white chinese splash-screen saying "4G" something. Waited...
10. Phone next booted to the usual Lenovo logo, with some chinese text at the bottom and three dots [...] flashing with thin white progress-line (most likely "rebuilding apps"?). This took a while, too.
11. The phone finally went into the wizard in Chinese, and then offered choice of English or Chinese as wizard language.
Wizard finished OK, then went to Settings -> About device -> ROM is upgraded indeed to VibeUI v2.5-1628 and Android 5.0.2.
NOTE: There's a LOT of chinese stuff, unfortunately, I guess it's part of the ROM; obviously this ROM is non-rooted...
However, the asian vendor installed/shipped ROM (VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU) was very light and fast -- I guess a deodex version? Or a VibeUI port?
Many thanks @askermk2000 for your help nevertheless.
Any idea, compared to your experience., if...
a) if your URL for latest firmware is maybe only for China? Your first post photos/screenshots don't have such Chinese apps On this ROM version, the shutdown logo is again that white chinese splash-screen with a big red "4G". Perhaps there's some other version for non-Chinese region?
b) if there's a stock, deodex ROM like that one? How did the Asian vendor find such light ROM, I am curious -- in that shipped ROM version, I had many menu languages. Now I only have English and Chinese as choices
c) if I need TWRP so I can flash Play Store, gapps and SuperSU? I don't think stock Recovery allows for these, any idea?
Cheers mate.

konsti said:
OK for the sake of information to everyone, I did the following:
0. Formatted SD card from within the phone (just to be sure). Then charged battery fully to 100%.
1. Copy (via PC) the latest firmware zip file (currently is VIBEUI_V2.5_1628_5.2186.1_ST_A7600_CU_WC5DAF1811.zip about 1GB size) to root of my SD card. This file looks like a recovery type, but files inside (some IMG, DAT and scatter files) could be flashable from PC (i.e. like SP Flash Tool etc.).
2. Renamed it update.zip
3. Put SD and battery back to phone.
4. Started phone in recovery mode: Pressed Volume Up + Down and Power buttons simultaneously; held them until recovery screen appeared. First, Lenovo logo, then a screen to choose language (Chinese/English); pressed English.
5. Selected the Install Upgrade Pack menu and pressed "YES" to the warning about encrypted phones.
6. Waited for update with circle-type update progress; for some reason it got seemingly stuck at 75% for some period. Waited patiently to finish.
7. I selected "Back" to go and clean user data.
8. Once done, I pressed back touch-button and selected "Restart".
9. Waited to see what happens. Was curiously greeted with a white chinese splash-screen saying "4G" something. Waited...
10. Phone next booted to the usual Lenovo logo, with some chinese text at the bottom and three dots [...] flashing with thin white progress-line (most likely "rebuilding apps"?). This took a while, too.
11. The phone finally went into the wizard in Chinese, and then offered choice of English or Chinese as wizard language.
Wizard finishedOK, then went to Settings -> About device -> ROM is upgraded indeed to VibeUI v2.5-1628 and Android 5.0.2.
There's a LOT of chinese stuff, unfortunately, I guess it's part of the ROM; obviously this ROM is non-rooted.
But the installed/shipped ROM (VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU) was very light and fast -- I guess a deodex version? Or a VibeUI port?
Many thanks @askermk2000 for your help nevertheless. Your photos/screenshots however don't have such Chinese apps...
Any idea, compared to your experience., if...
a) if your linked latest firmware is maybe only for China? The shutdown logo is again that white chinese splash-screen with a big red "4G". Perhaps there's some other version for non-Chinese region?
b) if there's a stock, deodex ROM like that one? How did the Asian vendor find such light ROM, I am curious -- in that shipped ROM version, I had many menu languages. Now I only have English and Chinese as choices
c) if I need TWRP so I can flash Play Store, gapps and SuperSU? I don't think stock Recovery allows for these, any idea?
Cheers mate.
Click to expand...
Click to collapse
Hello again
Yes, the official Chinese rom only has Eng/Chinese language. There may be a way to add more, idk because I only need English. The 4G boot logo is normal, was there on the rom linked in the first post also.
All the Chinese apps (or almost all) can be uninstalled without root permission. I never experience the rom to be less than fast and good, but I always immediately uninstalled the chinese apps, they do me no good anyways.
The rom you where supplied with is what is called ROW (international). If it's possible to get an updated ROW rom idk. All I know is that if you want a clean unhampered ROM, then the one I've shown you is the way to go.
PS: Yes you need custom recovery to flash the other stuff. Here is an updated TWRP: TWRP-3.0.2.3
^^This recovery has wrong device description in build.prop (actually it uses Lenovo K3) as a consequence you will receive error if trying to flash ROM's. So try the old one if you get these errors.

HI everyone, hi @askermk2000 and many many thanks for sharing your TWRP version 3.0.2.3 with us.
I followed this thread on how to root the Lenovo S8 A7600 phone and downloaded the tools needed (SP Flash Tool v5.1452.00 and VCOM drivers) on my Windows 7 laptop; then, installed them accordingly. Many thanks to @XxpikaachuuxX for providing links and steps on his thread!
1. Started up SP Flash Tool with administrator rights.
2. Chose the scatter file that was inside your shared TWRP-3.0.2.3 zip file; recovery image is automatically selected.
3. Shut down phone, remove battery.
4. Made sure all boxes in list were unchecked, except "recovery" then pressed "Download" button.
5 . Plugged phone on USB cable to PC, then inserted battery under the phone, as instructed.
6. Windows made a "USB plugged" sound, then SP Flash Tool detected phone OK and flashed recovery fine (there was the green tick-mark shown!)
7. Removed cable, removed battery, waited 10 seconds, re-inserted battery.
Then, copied to my SD card root folder, via PC (card reader) the following:
a) UPDATE-SuperSU-v2.46.zip
b) gapps-lp-20150211-signed.zip from this thread (lp=Lollipop)
(I had downloaded and installed wrong Gapps for 5.1 Android, but we need 5.0 version for this ROM--silly me. I just re-flashed via TWRP the correct package).
Went into recovery by pressing briefly Power then when the short vibration was felt, pressed VOL+ and VOL- and POWER simultaneously; the pleasant splash-screen of TWRP was shown!
1. Installed the needed SuperSU; then went back.
2. Installed gapps.
3. Wiped cache and Davlik (inside TWRP) then rebooted phone i.e. "system".
4. Waited patiently as it took a few minutes to go on the main Home screen.
5. Created Google account in "Settings" then went straight to "PlayStore" to update all applications, including SuperSU.
6. Ran SuperSU and upon request, updated the binary "normally" and rebooted just fine.
NOTE: In the Wi-Fi detected lists, since my first ever boot of this phone, I get a (fake?) SSID entry "NVRAM WARNING: Err = 0x10" which is apparently easily fixed for other phones. Do you guys you also got that?
A bunch of final questions to you, @askermk2000 when you have time to reply.
1) Does the stock weather display on a Home page work for you? I only get Chinese cities, location doesn't work as it says "city not found". Manual input of e.g. Europe cities doesn't show results, either.
2) Despite removing most via "Settings -> App Manager", any suggestions oh how to remove some further chinese apps that are marked "system app"? This article suggests NoBloat Free, Titanium Backup, System App Remover and App Master. I am not familiar with this approach but for example, "LenovoStore" could be removed...
3) Do you have by any chance the original, black b/g, folding (yes, boring) Lenovo animation boot logo to share? I see there's a file logo.bin for SP Flash Tools but others talk about /system/media/bootanimation.zip file... I ask if you have it, as the "Boot Animations" PlayStore app may not have the stock Lenovo boot. Perhaps flashing it via SP Flash Tool is better?
4) Will you kindly share any updates here to TWRP versions, whenever released? Do you anticipate any update in the coming 1-2 months, for example? (not sure there are bugs in TWRP-3.0.2.3, if any)
5) If there is a newer Lenovo official ROM available (than today) we obviously lose the TWRP recovery if we flash it all via SP Flash Tools; but we keep TWRP recovery if we update to the new ROM via TWRP, correct?
Thank you.

konsti said:
HI everyone, hi @askermk2000 and many many thanks for sharing your TWRP version 3.0.2.3 with us.
I followed this thread on how to root the Lenovo S8 A7600 phone and downloaded the tools needed (SP Flash Tool v5.1452.00 and VCOM drivers) on my Windows 7 laptop; then, installed them accordingly. Many thanks to @XxpikaachuuxX for providing links and steps on his thread!
1. Started up SP Flash Tool with administrator rights.
2. Chose the scatter file that was inside your shared TWRP-3.0.2.3 zip file; recovery image is automatically selected.
3. Shut down phone, remove battery.
4. Made sure all boxes in list were unchecked, except "recovery" then pressed "Download" button.
5 . Plugged phone on USB cable to PC, then inserted battery under the phone, as instructed.
6. Windows made a "USB plugged" sound, then SP Flash Tool detected phone OK and flashed recovery fine (there was the green tick-mark shown!)
7. Removed cable, removed battery, waited 10 seconds, re-inserted battery.
Then, copied to my SD card root folder, via PC (card reader) the following:
a) UPDATE-SuperSU-v2.46.zip
b) gapps-lp-20150211-signed.zip from this thread (lp=Lollipop)
(I had downloaded and installed wrong Gapps for 5.1 Android, but we need 5.0 version for this ROM--silly me. I just re-flashed via TWRP the correct package).
Went into recovery by pressing briefly Power then when the short vibration was felt, pressed VOL+ and VOL- and POWER simultaneously; the pleasant splash-screen of TWRP was shown!
1. Installed the needed SuperSU; then went back.
2. Installed gapps.
3. Wiped cache and Davlik (inside TWRP) then rebooted phone i.e. "system".
4. Waited patiently as it took a few minutes to go on the main Home screen.
5. Created Google account in "Settings" then went straight to "PlayStore" to update all applications, including SuperSU.
6. Ran SuperSU and upon request, updated the binary "normally" and rebooted just fine.
NOTE: In the Wi-Fi detected lists, since my first ever boot of this phone, I get a (fake?) SSID entry "NVRAM WARNING: Err = 0x10" which is apparently easily fixed for other phones. Do you guys you also got that?
A bunch of final questions to you, @askermk2000 when you have time to reply.
1) Does the stock weather display on a Home page work for you? I only get Chinese cities, location doesn't work as it says "city not found". Manual input of e.g. Europe cities doesn't show results, either.
2) Despite removing most via "Settings -> App Manager", any suggestions oh how to remove some further chinese apps that are marked "system app"? This article suggests NoBloat Free, Titanium Backup, System App Remover and App Master. I am not familiar with this approach but for example, "LenovoStore" could be removed...
3) Do you have by any chance the original, black b/g, folding (yes, boring) Lenovo animation boot logo to share? I see there's a file logo.bin for SP Flash Tools but others talk about /system/media/bootanimation.zip file... I ask if you have it, as the "Boot Animations" PlayStore app may not have the stock Lenovo boot. Perhaps flashing it via SP Flash Tool is better?
4) Will you kindly share any updates here to TWRP versions, whenever released? Do you anticipate any update in the coming 1-2 months, for example? (not sure there are bugs in TWRP-3.0.2.3, if any)
5) If there is a newer Lenovo official ROM available (than today) we obviously lose the TWRP recovery if we flash it all via SP Flash Tools; but we keep TWRP recovery if we update to the new ROM via TWRP, correct?
Thank you.
Click to expand...
Click to collapse
About that Wi-Fi problem. No I don't have it, and I was reading that page with the fix. It seems it's caused by using wrong settings in SPFlashtool, so likely the vendor did this when applying his trash firmware.
If you wifi is not working (as some reported in that thread) I would of course try to get a refund.
Weather gadget only has Chinese cities, yes I noticed that so I was using yahoo weather instead on my phone.
I would suggest Titanium Backup, it's what I use.
No, sorry I don't have any boot logos or animations.
This phone is a bit slow on the updates. But if there's an update, you can do it through the OTA update function which only downloads the changes as a patch. Though If your phone is heavily modified it might not work correctly. Could try a factory reset first, or simply start a fresh.
Then you would probably need to download the original recovery and flash that first.
PS: You can break the system by removing too much of the lenovo stuff. Remember VibeUi is heavily integrated and impossible to remove completely. Also, for gapps go to www.opengapps.org

help
Can you help me a bit? I got an infected phone and i need to install a new rom to keep myself safe. (im kinda noob to installing stuff like these)

First bootanimation "china4Gchina", second ok and poweroff ok.
Please help to change to first animation or delete.
Thanks.

Deep TEST fot OPPO RENO ACE(unlock bootloader)

OPPO's official website provides users with an official way to unlock bootloader.
coloros link:
https://bbs.coloros.net/graphic?id=1498611
you need to install the deeptest.apk to submit unlock request.
The application must meet all the following conditions:
1. The time to market must be more than 3 months;
2. No application record within 60 days;
3. The last consecutive login time of the OPPO account on this machine exceeds 60 days;
4. The number of in-depth test users has not reached the quota limit;
5. Non-government enterprises and operators customize mobile phones;
6. Support mobile phones listed in mainland China.
Unfortunately, there are currently no available quota.But if you want , you have to register an oppo account,and login time should more than 60 days.

So does this mean we can install custom rooms?

So... Hey guys,
I just wanted to let everyone know that I was actually able to flash the GSI from the link below on my OPPO Reno Ace:
https://forum.xda-developers.com/project-treble/trebleenabled-device-development/aosp-10-0-quack-phh-treble-t3992559
I am super new to all this, but I decided to take the risk anyways because I really wanted to get away from ColorOS. Luckily it worked out to the point that the phone seems functional so far (just flashed it as of writing this).
Disclaimer: Do this at your own risk! I am not responsible for what happens to your phone for following what I did. Please think twice before trying! Also remember to back-up your phone first!
Before I continue on how I got it to work, I got the Reno Ace Gundam edition. Not sure if that makes a difference but I thought this should be mentioned. Also since I couldn't find a version of TWRP for the Reno Ace; I followed the instructions on how to flash without it.
Here are all the main links I used:
Walkthrough for Deep Test app: https://forum.xda-developers.com/find-X/how-to/guide-how-to-apply-deep-testing-pafm00-t3888013
GSI: https://forum.xda-developers.com/project-treble/trebleenabled-device-development/aosp-10-0-quack-phh-treble-t3992559
Flashing Instructions and "vbmeta.img": https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
Extra Links in case of weird trouble. Hopefully you won't need it:
Google Usb Driver: https://developer.android.com/studio/run/oem-usb#InstallingDriver
How to manually install Google USB Driver: https://visualgdb.com/KB/usbdebug-manual/
Useful Key Word: Kedacom USB Device
*** Backup your phone before going forward.
Getting the Deep Testing app:
Now first, you do need to sign-up for an OPPO account. The link from the OP will take you to their site and you can sign-up from there.
- You will be required to login to your OPPO account in order to use the app.
- The file you download is named "Reno Ace深度测试.apk".
- Add ".apk" to the end of the filename if it's not already there. DO NOT rename the file.
- Once logged into your OPPO account on your phone, you stay logged in so you don't need to worry about actively logging in everyday.
- Next, follow the instructions on how to use the app from the Deep Test thread.
- Keep trying until your submission gets accepted, then the hardest part begins: you...wait...
- Once approved, it took ~2 days for me to be able unlock.
Make sure you have ADB ready on your computer:
- There are plenty of guides on it, so I'll just leave a link here; honestly I forgot the specifics already: https://www.xda-developers.com/install-adb-windows-macos-linux/
Steps:
- Prepare your GSI: You can look for other GSI(s), but from my research it seems safest to get it from here first; before trying others: GSI thread
- This link explains what GSI are and how to choose which one to get.
- *Make sure to extract the ".img" file from the ".img.xz" zip file.*
- Download "vbmeta.img" from "Troubleshooting Tips" of the "Flash GSI without TWRP" section of the How to Flash GSI Guide.
-After you've extracted the ADB folder, keep the files (.img files) you intend to flash within the "platform-tools" folder.
*Noob tip lol: Clicking on the folder address and typing "cmd" is the quick way to open command prompt within the directory.*
- *** There are some unique steps for the Reno Ace, if not all OPPO phones, due to the Deep Testing app. ***
- After you get your approval, note that if you press the "Start Deep Testing" text you will be immediately put into fastboot mode. SO DO NOT PRESS IT NOW.
- Make sure you have OEM Unlock and USB Debugging enabled within Developer Options. Then connect your phone to your PC and set it to transfer files.
- On computer, open command prompt within the "platform- tools" folder. Enter the command "adb devices", when you see your device ID and "device" next to it, this means the phone has been connected. (If a prompt on your phone pop-ups, tap the "Always allow this computer to USB Debug" and "Allow". This is just what I did, not sure if it's necessary).
- Now go into the Deep Testing app on your phone, tap on "Queue status" and then "Start Deep Testing".
- You should see the images from this Oppo Find X tutorial, on your phone. Landing on the screen with the big green "Start" on top.
- Once you're here, enter "fastboot flashing unlock" into ADB and you'll move on to the next screen where you select "Unlock the Bootloader".
- After confirming, your phone will factory reset itself, and reboot into ColorOS again.
- Check to make sure your phone is connected to adb.
- From here on you follow "Flash GSI without TWRP" part of the How to Flash GSI Guide starting at step 2. If you have your ".img" files in the "platform-tools" folder then you can skip step 3.
- Before step 5 you need to flash the vbmeta: fastboot flash vbmeta name_of_vbmeta.img
Then flash the GSI ".img" file with fastboot -w flash system name_of_system.img.
(The comments there mentions that the "-u" is incorrect and should be "-w", which worked for me.)
* Important: without flashing "vbmeta.img" you'll be stuck in a boot loop because the phone prevents you from booting into the GSI. If this does happen, hold down Volume Down and Power until the phone vibrates to boot back into "fastboot mode". Enter "fastboot device" in ADB to confirm the phone is connected, and start over from step 4 in the How to Flash GSI Guide. *
- Once you finish step 6 your phone should boot into the GSI.
Hopefully this proves useful. I'm no expert, I simply found my way around things.
I honestly have no idea where to go from here, Magisk? LineageOS? If anyone can give me some pointers, that would be very much appreciated.
Things that are not working for me:
- Can't setup In-screen Fingerprint sensor

I got a twrp that works just finished rooting with help of the vbmeta above

Darktron13 said:
I got a twrp that works just finished rooting with help of the vbmeta above
Click to expand...
Click to collapse
Would you mind giving a link to the twrp you found? I was searching around for one as well, but I couldn't find anything I felt comfortable with.
Also did you also flash a gsi? If you did, I was wondering if your headphone jack is working. Mine doesn't work anymore; the phone seems to recognize it, but no headphone icon shows up and sound plays through the speakers only.

falsewind said:
Would you mind giving a link to the twrp you found? I was searching around for one as well, but I couldn't find anything I felt comfortable with.
Also did you also flash a gsi? If you did, I was wondering if your headphone jack is working. Mine doesn't work anymore; the phone seems to recognize it, but no headphone icon shows up and sound plays through the speakers only.
Click to expand...
Click to collapse
Haven't install any gsi just have ColorOS 7.1 C.27 I cant remember where I got that twrp from all I know is a Chinese twrp think I found it on some baidu drive I was just waiting on approval from the in depth testing app.

Darktron13 said:
Haven't install any gsi just have ColorOS 7.1 C.27 I cant remember where I got that twrp from all I know is a Chinese twrp think I found it on some baidu drive I was just waiting on approval from the in depth testing app.
Click to expand...
Click to collapse
Thanks for the quick reply. I think I know where that's from. I believe that it's from here:
http://www.romleyuan.com/lec/read?id=348
Let me know if it looks familiar. Great to know that it works!

falsewind said:
Thanks for the quick reply. I think I know where that's from. I believe that it's from here:
http://www.romleyuan.com/lec/read?id=348
Let me know if it looks familiar. Great to know that it works!
Click to expand...
Click to collapse
Yes looks familiar it should be that one the twrp itself has Chinese and English languages.
Formatting and wipe is working otg also haven't really tested alot also you can flash ozip stock rom with it if you plan on rooting the boot gets corrupted but with the vbmeta bypasses it.
if you plan on installing V4A don't do the magisk module will bootloop have to look for the rootless V4A. (also need AML and the sound is great)
also don't change to f2fs i did it and the phone make weird noises went back to ext4.

Darktron13 said:
Yes looks familiar it should be that one the twrp itself has Chinese and English languages.
Formatting and wipe is working otg also haven't really tested alot also you can flash ozip stock rom with it if you plan on rooting the boot gets corrupted but with the vbmeta bypasses it.
if you plan on installing V4A don't do the magisk module will bootloop have to look for the rootless V4A. (also need AML and the sound is great)
also don't change to f2fs i did it and the phone make weird noises went back to ext4.
Click to expand...
Click to collapse
Awesome! Thanks for the info, it will come in handy later on. Still just learning and getting familiar with all this.

A follow up after a couple of days of using phhusson's gsi.
Overall the phone is functioning very well. Generally smoother than on ColorOS.
Things to note:
- Battery life is good, same if not better than on ColorOS.
- Fast charge works. Full charge in around under 30 mins.
- Wi-fi works and Data works.
- Phone and Text work.
- Camera works.
- Headphone jack won't work until you go into the treble-settings (Phh Treble Settings) -> Qualcomm features -> and turn on "Use alternate audio policy"; then restart your phone. Then it will work again, although no headphone icons will appear. I don't use Headsets, so I couldn't test if that works as well.
- The phone will be rooted by default, so certain apps can't be downloaded, or used. (Root can be removed, but it doesn't seem like a good idea.) There are ways around this, but I didn't dive very deep into it.
Problems to note:
- In-screen fingerprint sensor can't be used.
- No auto-adjusting brightness.
- Brightness is a lot brighter than in ColorOS. Even lowest brightness is bright.
- Auto-Rotate is very sensitive and won't stay landscape when phone is flat on a table.
- Certain apps may not be full screen if you use the new gesture navigation. (Shadowverse)
- I didn't test Bluetooth or NFC. I don't use them much, or at all, so I'll follow up on that when the time comes and no one else has mentioned anything on them yet.
That should be all for now. Honestly very happy with the move. Hope this helps.
**Just an extra reminder that this is my experience with this specific gsi. **

Is this still available? I can't download the APK from Oppo, I logged onto my 'heytap' account but the download link just brings me to my account information.

twgib said:
Is this still available? I can't download the APK from Oppo, I logged onto my 'heytap' account but the download link just brings me to my account information.
Click to expand...
Click to collapse
I've reply back on the other post about Oppo Reno which model you have Ive posted both apks

Darktron13 said:
I've reply back on the other post about Oppo Reno which model you have Ive posted both apks
Click to expand...
Click to collapse
Thank you so much! You're too kind!

Nice to see some progress on this phone it has so much power and potential!

Help
Darktron13 said:
Haven't install any gsi just have ColorOS 7.1 C.27 I cant remember where I got that twrp from all I know is a Chinese twrp think I found it on some baidu drive I was just waiting on approval from the in depth testing app.
Click to expand...
Click to collapse
Please can you share the twrp, I have the device but it is really hard for me to download it from baidu, if you were already kind to share it, you would help me a lot to test the phone, thanks in advance. Sorry for my English, it's not very good.

is there any info about what stock rom you're using? i was trying to install Phh's AOSP gsi thourh fastboot, the system-quack-arm64-aonly-vanilla.img , and only to get stucked at the OPPO logo, i'm using C26 curently

刘欲杰lol said:
is there any info about what stock rom you're using? i was trying to install Phh's AOSP gsi thourh fastboot, the system-quack-arm64-aonly-vanilla.img , and only to get stucked at the OPPO logo, i'm using C26 curently
Click to expand...
Click to collapse
ok, i figured it out. Ace is a System-as-root device,so i need to use a/b img files

I wanna root my phone

OPPO Reno Ace Twrp.7z
1 file sent via WeTransfer, the simplest way to send your files around the world
we.tl
[这是color7 可以用的twrp 如果你们可以进去下载的话

xdsfh said:
OPPO's official website provides users with an official way to unlock bootloader.
coloros link:
ColorOS 12_话题_OPPO手机官方社区
ColorOS 12延续“无边界”设计理念，为你带来更懂你的智慧操作系统！
bbs.coloros.net
you need to install the deeptest.apk to submit unlock request.
The application must meet all the following conditions:
1. The time to market must be more than 3 months;
2. No application record within 60 days;
3. The last consecutive login time of the OPPO account on this machine exceeds 60 days;
4. The number of in-depth test users has not reached the quota limit;
5. Non-government enterprises and operators customize mobile phones;
6. Support mobile phones listed in mainland China.
Unfortunately, there are currently no available quota.But if you want , you have to register an oppo account,and login time should more than 60 days.
Click to expand...
Click to collapse
URL not found