Related
bigjuan86 said:
In case anyone is interested, sgpstore.com now has the ultra clear and anti fingerprint screen protector available to order.
Click to expand...
Click to collapse
Just placed my order! Guys these are the best protectors around... Here are links to the Ultra Clear and the Anti Glare. I've only used the Ultra Clear, I think it would be a crime to hide this beautiful screen with an anti glare... There is a new video on these pages showing install on a Galaxy S... you can literally install them this easily and then lift up with the stickers to remove any dust with another sticker if you get any. You get 2 per pack.
Ultra Clear:
http://www.sgpstore.com/product_info.php/cPath/23_29/products_id/1668
Anti Fingerprint
http://www.sgpstore.com/product_info.php/cPath/23_29/products_id/1669
Why did they give our phone that big gap at the top while the other models get that nice clean cut look?
CouchSpud said:
Why did they give our phone that big gap at the top while the other models get that nice clean cut look?
Click to expand...
Click to collapse
I'm assuming you mean the fact that the protector doesn't go all the way around the speaker bezel? That I'm sure, is to avoid issues with that tiny little bit of screen protector that would otherwise be there, failing to stick or lifting. The less cuts and tiny bits you have on a protector, the longer it will last, because it will be less prone to lift or stop sticking or catch on something.
I actually prefer that it doesn't go all the around for that reason. I'm having issues with my current protector (the stealth guards one) having that tiny bit slide around and not stick well, it looks like crap...
Also, you're not going not notice anyways once this thing is installed. It's exaggerated in the picture so you can see the what the screen protector looks like. Once it's installed, it's as clear as glass if you put it on well. You'll probably be hardpressed to even notice it's there except for the "lip".
Thanks!!!! Just placed my Ultra Clear order...yay!!! They are truly best ones out.
Protonus said:
I'm assuming you mean the fact that the protector doesn't go all the way around the speaker bezel? That I'm sure, is to avoid issues with that tiny little bit of screen protector that would otherwise be there, failing to stick or lifting. The less cuts and tiny bits you have on a protector, the longer it will last, because it will be less prone to lift or stop sticking or catch on something.
I actually prefer that it doesn't go all the around for that reason. I'm having issues with my current protector (the stealth guards one) having that tiny bit slide around and not stick well, it looks like crap...
Also, you're not going not notice anyways once this thing is installed. It's exaggerated in the picture so you can see the what the screen protector looks like. Once it's installed, it's as clear as glass if you put it on well. You'll probably be hardpressed to even notice it's there except for the "lip".
Click to expand...
Click to collapse
I ordered one regardless, but after reading a bit more into it, I get what you mean. My stealth guards cover isn't having that problem, but seeing how SGP doesn't use as much adhesive, I can see how it could end up looking crappy.
Finally! Now I'm just waiting for those cases they have for the other Galaxy S phones.
Ordered mine yesterday... Thank goodness, because they are already "temporarily out of stock" if you try and order one today...
I had this on my droid inc and loved it. I am stoked they are finally out for the fascinate. Now I can throw away the crappy verizon one.
anti fingerprint or ultra clear???? i dno what to get?!?!?!?!!?! helpppp
edit: the ultra clear is out of stock anti fingerprint it is.
wow they are fast. just got my shipment email
i'm going to order one but i dont like how firefox requires me to authorize web certificate .. doesn't seem so safe
Got mine already. I ordered it yesterday morning. It looks great to me.
Where the hell are all the good SGP cases!?
anyone comment on the quality of their silicon cases vs others?
Damn I want the crystal clear one, wonder when they will be back in stock.
Dhuss said:
Damn I want the crystal clear one, wonder when they will be back in stock.
Click to expand...
Click to collapse
never!! muahahahahah!!!! jk i want one too lol
I was going to get an Invisible Shield but it just looks so damn clear in that video it's amazing.
I like how they give you twp also considering my brother and I both have Fascinates.
Sent from my SCH-I500 using Tapatalk
I want one, was a day late reading this thread well gotta wait now.
Sent from my SCH-I500 using XDA App
Gone now. Removed from website???
What are the advantages of the ultra clear vs the anti fingerprint?
SGPstore.com is no longer showing these protectors but I found the anti fingerprint on amazon at the following link.
amazon.com/SGP-Steinheil-Anti-Fingerprint-Fascinate-Protector/dp/B00496NKKS/ref=sr_1_2?ie=UTF8&s=wireless&qid=1288554999&sr=8-2[/url]
Ultimately I settled on the trident case, pictures in this post. Thanks to gtny930 for finding it for us.
There are some other good case recommendations scattered through the thread, as I get the time I will source them up here for easier reference.
--------
Hey all, i've been searching amazon off and on for cases for our wonderful device, and finally pulled the trigger on one:
Link here
Says it's by HTC, and I ordered from BlueMall, at $0.32 I couldn't not get it...
Rubberized case, two pieces to fit the slide function, looks like a winner.
I doubt it'll be as good as an otterbox as far as protection, but a buddy of mine has an otterbox for his Inspire 4G - and suffers from serious overheating problems. Since our phone already suffers from that with the stock battery i'm gonna pass otterbox by on this phone. (Anker 1900 battery solved overheating problems for me)
Anyways, at less then $3.50 shipped, seemed like a fantastic deal.
Meantime, I have a screen protector and bodyglove on it now, which seems to be a good temporary fix until some proper protection was available. Love the glove, but to me it's only a temporary solution.
What're the rest of you doing for a case or protection for your phone? I'd love to hear about it.
ArmorSuit and HTC Messenger
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Found this on Ebay. Still waiting for it (and MT4GS) to come. =[
I'm not allowed to post links yet so just put a dot in between.
http://www ebay.com/itm/HTC-MYTOUCH-4G-SLIDE-Hard-Cover-Case-SUMMER-FLOWER-/220839183408?pt=PDA_Accessories&hash=item336b0a8430#ht_2773wt_673
Lily.
MT4GS Cases / Shells
The rubberized hard Body Glove shells offered by T-Mobile (and sold on Amazon, eBay, etc...) are bulky and are missing holes for the microphone above the camera lens. I ended up buying the full body Invisible Shield and it looks great. The only problem is that they didn't include a piece for the bottom front of the phone (under the buttons and around the touchpad). I can put a hard case over the shield if I want, for extra protection or to just change up the look.
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
I'm actually a fan of the body glove case. I'm just waiting for something with more clearance because of the anker battery. I've heard goods things about the otterbox, but it is kinda bulky.
Sent from my MyTouch 4G Slide
SolemnWishing said:
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
Click to expand...
Click to collapse
I was going to edit in my response about the case I got in the first post - but after this one I quoted I need say not much more.
I really want to like the case, it feels nice and looks good on the phone...but it makes it too much of a pain in the ... to get the back of the case off.
I didn't realize how often I pop the back of the phone open to swap out memory cards until I put the case on.
It lasted on my phone for about 3 hours before I took it off...and it scratched one corner of my phone when I did it. Scratch isn't bad, and it'll probably buff out over time, but it's the first damage the phone has suffered - ironically from the thing that was supposed to prevent this.
If you are never going to pop open the back of the phone to get to the memory card, and you don't mind the backside of your screen-half of the phone getting scratched up when you slide it open - then this is a pretty decent case.
I think the scratching the back of the screen part can be solved by using a knife to cut a sliver off the part that sticks op, then maybe using a small piece of electrical tape to cover that clip.
I like it, I want to like it, but I can't use it - I take the phone apart too damn much for a case like this to be practical.
I'm on the lookout for a gel-type case now. Think that'll be the perfect solution. If anyone finds one, please mention it here.
I got the black cheap case today. After reading the reviews I knew better than to just throw it on there. So I took a small metal file that I have, and proceeded to shave each clip down just a little. After a few trials I got the clips shaved down enough that they all fit and are not pressing against the bottom of the screen hard enough to scratch it.
The coating on this case was not really rubber. Its more of a dusted flat black. It's not slick to the touch, but it doesnt grip like the rubber of the phone.
The phone still fits into the generic style T-mobile mount. But its not as secure as without. I can turn it upside down and give it a light shake without coming loose. So hopefully it will be fine.
I got my psychedelic cover and I'm not very impressed with it. It makes the phone very bulky and awkward to hold (maybe because of my small girly hands -_-).
I find taking the back cover off particularly stressful because I'm scared I'd rip the screen off the keyboard.
Protection wise I haven't dropped my phone yet to see what kind it would provide but I'm guessing it wouldn't fall off the phone if dropped.
Haven't seen any dents or scratches caused by it.
I think I'd prefer it if it had a more rubbery feel as the texture is kind of smooth and slippery.
Overall, I'm satisfied with it but I wish I could figure out a way to take off the cover without the fear of destroying it. Haha.
Lily.
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
The otterbox exists for this phone? Or you speaking generally about the otterbox product line?
Sent from my MyTouch 4G Slide using xda premium
ssb33 said:
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
Click to expand...
Click to collapse
Yes, it's a woven "carbon fiber" pattern. I took the pictures at angles where the light shows it more clearly. I think it looks nice and provides a "non-slip" surface as well without adding any bulk to the phone when you want to use it, which I personally prefer.
siani_8 said:
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Click to expand...
Click to collapse
Thanks for linking this and posting the pics on Amazon., I'm going to order one today.
Thanks. I ordered one and installed it yesterday. The front and back went on great. I had more trouble with the sides but that is because I am not the most deft person around. There are a lot long thin pieces but MT4GS has a lot of moving parts. The phone looks great from the front. But the back has a bubble or two - again my clumsiness.
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
Click to expand...
Click to collapse
That's about the same thing I got that I posted about before - just mine is in black.
I know I said a few posts back that I wasn't going to use it, but I had to do something to try to keep it safe.
I've been using it for a few days now, and while I have my gripes, I suppose it's okay.
I got tired of not being able to put it down anywhere, for fear of scratching the camera lens. This case sits further down then the lens, so it isn't the thing the weight of the phone rests on.
Before, i'd have to find something soft to put it down on everywhere I went, which was annoying. I wouldn't put it in my pocket, because they are always full of dust and whatnot - that little grainy stuff gets into the phone and I didn't want that.
Now, with the case on, it doesn't fit in my belt holster anymore - so I have to put it in my pocket or carry it. Desperately seeking another solution but coming up short.
What i'm thinking about doing is drilling some holes in the back of the case, and attaching a belt clip to the hard case shell itself.
So now i'm looking for either a belt holster or a clip I can attach to the hard case itself. Whatever ends up happening, i'll get some pictures and put 'em up here.
What I really, really, really, really want is a soft-rubber case, like a gel case of some sort that can absorb shock - not some hard plastic thing.
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
Click to expand...
Click to collapse
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Any body have a silicone case? Or one of these?
http://www.ebay.com/itm/HTC-MYTOUCH...Accessories&hash=item231421d01f#ht_1896wt_922
Looks good. Other colors available too.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
_atlien_ said:
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Click to expand...
Click to collapse
It fits snug, coming off accidentally isn't a problem. Both the top piece and the bottom piece are secure, normal - or even some exaggerated abnormal - use won't knock it off.
The longer I use the case the more it grows on me, I really like the silky feel of it. There have been a few situations already where having a case protected the phone - I haven't dropped it and hope I never do, but since it's becoming a portable video game system/controller amongst other things it can't be without one.
I suppose you could do far worse then this case, but i'd trade it for a gel-type rubber case in a heartbeat. Hard cases don't protect from shock damage.
Hey all, anyone else noticed on these Samsung Flip cases, they dont stay flush to the screen, in the case of the S view cover you would think the magnet would help keep it closed but no its just a trigger for the sensor. Bit expensive for what it is given it's flawed design.
From what I hear its great once you've broken it in
s view cover is a best cover for s4
I received mine today from handtec.. it fits and close perfectly.
I like this case but only grip it totally covers the led notification and coz of dat gotta keep checking if I missed a notification :banghead:
Sent from my Galaxy S4 .
It's a pain:silly: Samsung should flash a reminder in the s view window
Read elsewhere of someone cutting a button hole for the led :good:
azeter said:
I like this case but only grip it totally covers the led notification and coz of dat gotta keep checking if I missed a notification :banghead:
Sent from my Galaxy S4 .
Click to expand...
Click to collapse
kist32 said:
Cheap Galaxy S4 S View Cover, http://dx-box.com/galaxy-s4-s-view-flip-cover-folio-case.html
Click to expand...
Click to collapse
Interesting. I might just bite on one of those. Even though I don't think it's actuall the official one, it's probably about the same. I have a co-worker who spent $60 on hers and I wasn't really impressed with the build quality, though I do love the concept. But to me, it seemed more like a $15 cover anyway.
green s cover
https://www.youtube.com/watch?v=wOfFVD_Qy5I
orange s cover
https://www.youtube.com/watch?v=lvF8hbOMfjs
black s cover
https://www.youtube.com/watch?v=DPzyUG3petE
check my signature for other useful stuff
I have a new Samsung Galaxy S4 S-View Flip Cover Folio Case (Black) if anyone wants it in uk £25 delivered pm me I just got a new case in new condition only used once.
I bought this cover, and I like it ... it's the one thing keeping me away from trying an AOSP ROM (e.g. CM 10.1) ... Don't want to lose the window functionality.
I had an official Samsung S-View cover given free when I upgraded my contract.
Like others have said, the front cover didnt stay closed flush to the screen, but after a day or so "bedding it in" it now closes perfectly.
I find the case very good, and it's great that you can answer/reject calls etc sliding across the case window itself.
There are however 2 fundamental flaws with this case:
1. There is no hole for the notification LED (as already mentioned) I was contemplating drillling a hole through it to allow for this, but wit this case on and shut, the LED notification only ever lights up to show it's charging. The LED is disabled for missed calls/sms when the case is shut! This is a huge flaw of the S4+S-View combination in my opinion.
I'm hoping a future firmware update will address this, but as the cases being sold do not have this hole, I would be extremely surprised if this is done. Perhaps this may be a mod for some clever dev to do! :good:
2. The case greatly interferes with the devices ability to use any compass app. Open up a compass app and slowly open/shut the case and you will see the compass bearing alter considerably. This puts a huge doubt over the accuracy of such apps when this case is in the open position.
could be better
It should have had the led hole from factory. but that's samsung for ya..good ideas always seem to be an afterthought.. anyway.. i just drilled a hole in mine and it seemed to do the trick. sometimes it closes too well as can be a pain to open (to grip using fingers), but still a better case then most as it doesn't add much bulk or wait to the phone.
Nice case but minimum protection
I had flip cover case on my note 1, i dropped the phone once and the case didn't helped much to protect the phone from scratches on the side. Now i have S4 with the S view cover and similar thing happened, my case opened during fall and landed on the screen... As much as i like the flip cases they offer very little protection. I have to try different case for the upcoming Note 3. Any suggestions which case can offer solid protection?
morow said:
I had flip cover case on my note 1, i dropped the phone once and the case didn't helped much to protect the phone from scratches on the side. Now i have S4 with the S view cover and similar thing happened, my case opened during fall and landed on the screen... As much as i like the flip cases they offer very little protection. I have to try different case for the upcoming Note 3. Any suggestions which case can offer solid protection?
Click to expand...
Click to collapse
I would definitely give the Spigen Slim Armor View a try. I just got this case in black and it's totally awesome. There are many threads in here discussing this case. I would like give links to them but not sure how to do it so I would just do a search. Tons of pics and reviews as well.
Excuse my late reply, I got this phone with a free S-cover a week ago. In my opinion the case build quality is crap. I've broken the cover in and it doesn't stay closed until I had to bend the cover to create a deeper crease. Now the cover is starting to misalign and become loose. Volume button is covered also. Sides are fraying.
When I first got it, I already thought, this case was not protective at all. The cover seemed as thick as a peice of cardboard, and there is no covering or shock absorption at all around the edges or back.
A week later I went to my local Asian variety store and bought a protective case for $6. Quality was 10x than the s-view cover and I'm not even exagerating. Imediatley switched cases. Save your money. Don't buy this.
If you want to the quality of s-view cover, a makeshift credit card wrapped in cloth works just as well.
Surprisingly, I was able to price-match an Amazon price at Target. I'm enjoying it but I hope it breaks in cause the flap not closing issue is a tad inconvenient.
Has anybody modded a tpu case too accomodate the S View cover?
Sent from my SGH-I337M using Tapatalk 4
Samsung or ....others?? Samsung is OK, others NOT
Please specify in your infos if you are talking abount a ORIGINAL SAM S-View (arround 35$ - 55$) or a cheapo 'SUMSUMG' or any other type of cheaper S-Views (ranging from 8$ to 25$)
I had a 'fake' S-View, which didn't stay closed, added thikness to the back cover, looked like 'cardboard', and, furthermore, if you folded it open completelly to the back of the phone, it activated the magnet!! So it was really 'crappy'
I now have a real S-View, and none of the above apply!
It closes (and stays closed) perfectlly from minute 1
It's exactlly as thick as the original cover
It has a 'cleanable plastic' finish
It can be open 360º to the back without activating the magnet
So... beware of fakes. It was difficult to tell, as they 'case' them as if original, but they're definitelly LOW QUALITY.
Can you buy a case that users s view front cover? Im used to it now but want a case? ??? Thanks
Sent from my GT-I9505 using xda app-developers app
beanbag37 said:
It should have had the led hole from factory. but that's samsung for ya..good ideas always seem to be an afterthought.. anyway.. i just drilled a hole in mine and it seemed to do the trick. sometimes it closes too well as can be a pain to open (to grip using fingers), but still a better case then most as it doesn't add much bulk or wait to the phone.
Click to expand...
Click to collapse
Can you pay a picture or more of the mod you made? Please!!!
Sent from my SCH-I545 using Tapatalk 4
this looks like a great case; I placed my pre order today...Anyone have experience with this case?
thanks..
http://www.amazon.com/gp/product/B00BQ2Y0O8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
This is great. I accidentally dropped my device while using the STM Cape case and it doesn't protect the bottom corners well. This looks like it will cover it up.
Sent from my GT-N5110 using XDA Premium HD app
Bonisaur said:
This is great. I accidentally dropped my device while using the STM Cape case and it doesn't protect the bottom corners well. This looks like it will cover it up.
Sent from my GT-N5110 using XDA Premium HD app
Click to expand...
Click to collapse
yeah, i know from years of dropping devices, that its only a matter of time till that happens with this device, so I am excited about this thing!
the mfg website says june 7th, so I am hoping the amazon supplier gets it sooner than the 28th; for the 60% savings,its worth waiting!!
wase4711 said:
yeah, i know from years of dropping devices, that its only a matter of time till that happens with this device, so I am excited about this thing!
the mfg website says june 7th, so I am hoping the amazon supplier gets it sooner than the 28th; for the 60% savings,its worth waiting!!
Click to expand...
Click to collapse
I've pre-ordered from then before. It's a bit like of a hit and miss. Last time they missed their arrival date by two weeks because their shipments of their stock didn't come in on time, but they're very friendly and responsive. They updated me with the next expected date as soon as it was available.
Sent from my GT-N5110 using XDA Premium HD app
Wow, that looks like it provides great coverage! I guess you have to store the S-Pen separately though (doesn't seem like there is a slot for it)? I also wonder what it will feel like to write on it, regarding both the "touch-sensitive, water-resistant screen-guard" (and how that will feel with the S-Pen) and also with the raised case edges.
pluginalong said:
Wow, that looks like it provides great coverage! I guess you have to store the S-Pen separately though (doesn't seem like there is a slot for it)? I also wonder what it will feel like to write on it, regarding both the "touch-sensitive, water-resistant screen-guard" (and how that will feel with the S-Pen) and also with the raised case edges.
Click to expand...
Click to collapse
people who have gotten this case for other devices suggested that you pop out the screen guard, and use your own, so I have a new Spigen on mine, so I dont want the one that is on the case; plus, I am sure there is a slot for the spen; that would be a major problem if there isnt one...raised case edges are a good thing for putting the tablet face down...
pluginalong said:
Wow, that looks like it provides great coverage! I guess you have to store the S-Pen separately though (doesn't seem like there is a slot for it)? I also wonder what it will feel like to write on it, regarding both the "touch-sensitive, water-resistant screen-guard" (and how that will feel with the S-Pen) and also with the raised case edges.
Click to expand...
Click to collapse
I think it's a fall where you pull it out. It looks like all the ports have it and I think it's to protect openings from dust.
Sent from my GT-N5110 using XDA Premium HD app
Wow.. this changes the Galaxy Note 8 into completely something else
Very nice. I much prefer non-portfolio style cases due to their immediate accessibility. But I also prefer one with a built-in stand for video viewing and this one seems to be the first one like that for the note that I've come across (and a more premium model at that.) Based on the reviews for other tablets this seems a good possibility. Added to my wishlist and I'll be eagerly checking this forum/thread for a review once it's available.
Otterbox has already said they have no plans for a Note 8.0 case unfortunately. Odd since the Note 8.0 seems to be selling very well (at least according to my local Best Buys) and people who would pay $400 for a premium tablet would seem the most likely to not balk a premium case. I know I wouldn't. Oh well....
Link to the manufacturer page btw with higher-res pics:
http://www.yourpoetic.com/p/494/poetic-revolution-case-for-the-samsung-galaxy-note-80
wase4711 said:
people who have gotten this case for other devices suggested that you pop out the screen guard, and use your own, so I have a new Spigen on mine, so I dont want the one that is on the case; plus, I am sure there is a slot for the spen; that would be a major problem if there isnt one...raised case edges are a good thing for putting the tablet face down...
Click to expand...
Click to collapse
This case looks just like what I was after. I got a cheap folio case to start with while I waited to find my ideal case. I like the rased bevel. wanted one like that to help prevent me clicking the capacitive buttons by mistake in landscape mode. The raised home button will also prevent me accidentally pushing that as well. Happens sometimes when playing multiplayer fps games.
I've still not decide if I'll get a screen guard or not. Dont intend on using the one provided though.
Look forward to your feedback. Not available until June 30th in the UK.
Poetic Revolution for Samsung Galaxy Note 8.0 - 2 thumbs up
wase4711 said:
this looks like a great case; I placed my pre order today...Anyone have experience with this case?
thanks..
Great experience with this case. Does the job - awesome protection. Plus home button protection AND a kickstand. Couldn't ask for more.
Click to expand...
Click to collapse
thanks for the great pix, and the feedback!
they shipped mine yesterday, so super excited about getting it soon..
YES! - stylus slot in Revolution for Samsung Galaxy Note 8.0
Grogck said:
Very nice. I much prefer non-portfolio style cases due to their immediate accessibility. But I also prefer one with a built-in stand for video viewing and this one seems to be the first one like that for the note that I've come across (and a more premium model at that.) Based on the reviews for other tablets this seems a good possibility. Added to my wishlist and I'll be eagerly checking this forum/thread for a review once it's available.
Otterbox has already said they have no plans for a Note 8.0 case unfortunately. Odd since the Note 8.0 seems to be selling very well (at least according to my local Best Buys) and people who would pay $400 for a premium tablet would seem the most likely to not balk a premium case. I know I wouldn't. Oh well....
Link to the manufacturer page btw with higher-res pics:
wase4711 said:
people who have gotten this case for other devices suggested that you pop out the screen guard, and use your own, so I have a new Spigen on mine, so I dont want the one that is on the case; plus, I am sure there is a slot for the spen; that would be a major problem if there isnt one...raised case edges are a good thing for putting the tablet face down...
Click to expand...
Click to collapse
pluginalong said:
Wow, that looks like it provides great coverage! I guess you have to store the S-Pen separately though (doesn't seem like there is a slot for it)? I also wonder what it will feel like to write on it, regarding both the "touch-sensitive, water-resistant screen-guard" (and how that will feel with the S-Pen) and also with the raised case edges.
Click to expand...
Click to collapse
I had the same thought too when I first saw the case. I was happy to find out there is no need to store the stylus on the side - there is a slot for it in the case! As for writing on the screen protector, I haven't noticed any difference from writing on the Note 8.0 screen with the stylus. I posted a pic in another response if you're curious to see.
Click to expand...
Click to collapse
well, got this case yesterday, and I have to say its everything I had hoped for and more; sort of like an otterbox, with a built in stand, which works in portrait and landscape.
HD rubber around the screen edges, fully protect port openings, and even the camera has a flip off protector, which,even has a little "slot" that holds it back when you want to use the camera; very nice high end touches like that, and a very solid feel to it as well.
You insert it inside a plastic bottom frame, then snap the top cover over it, which has a very nice clear protector built into it, which, when used in conjunction with my current Spigen Ultra Clear, provides a fantastic surface to easily use my spen/holder on, giving you the identical feel as if you were writing on a legal pad, with a pen...very nice!
You then wrap the rubber cover around the frame, and after a few minutes of adjusting, you have basically a giant "otterbox" like protected tablet!!
Its probably not for eveyone, but I love holding the tablet in my hand, like a giant G-Note 2, and writing on it and using it now is so much nicer...I think it would easily survive a major fall, but dont ask me to try that!!
Definately more useful, and much better protection than any of these folio/notebook fabric covered cardboard cases that are all over the place..its just a little bulky for those with small hands...
Amazon price was 60% off the price from Poetic, so I would suggest you get if from Amazon if you are interested..
http://www.amazon.com/gp/product/B00BQ2Y0O8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
wase4711 said:
well, got this case yesterday, and I have to say its everything I had hoped for and more; sort of like an otterbox, with a built in stand, which works in portrait and landscape.
HD rubber around the screen edges, fully protect port openings, and even the camera has a flip off protector, which,even has a little "slot" that holds it back when you want to use the camera; very nice high end touches like that, and a very solid feel to it as well.
You insert it inside a plastic bottom frame, then snap the top cover over it, which has a very nice clear protector built into it, which, when used in conjunction with my current Spigen Ultra Clear, provides a fantastic surface to easily use my spen/holder on, giving you the identical feel as if you were writing on a legal pad, with a pen...very nice!
You then wrap the rubber cover around the frame, and after a few minutes of adjusting, you have basically a giant "otterbox" like protected tablet!!
Its probably not for eveyone, but I love holding the tablet in my hand, like a giant G-Note 2, and writing on it and using it now is so much nicer...I think it would easily survive a major fall, but dont ask me to try that!!
Definately more useful, and much better protection than any of these folio/notebook fabric covered cardboard cases that are all over the place..its just a little bulky for those with small hands...
Amazon price was 60% off the price from Poetic, so I would suggest you get if from Amazon if you are interested..
http://www.amazon.com/gp/product/B00BQ2Y0O8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I was wondering if anyone could give the exact size of the case in inches. I am considering a swap to the note 8 from my nexus 7. Size is a concern because I keep it in my flight suit pocket. The Note 8 without a case is the same size in H and W as my nexus 7 with an otterbox installed. I was wondering how much extra size the poetic case adds. Thanks for the help!
Uh60m Pilot said:
I was wondering if anyone could give the exact size of the case in inches. I am considering a swap to the note 8 from my nexus 7. Size is a concern because I keep it in my flight suit pocket. The Note 8 without a case is the same size in H and W as my nexus 7 with an otterbox installed. I was wondering how much extra size the poetic case adds. Thanks for the help!
Click to expand...
Click to collapse
8 1/2 inches long, 5 3/4 wide, 5/8ths of an inch thick is the total size with this case on...the corners are diaganally cut, if that matters to you..
Just ordered mine on amazon for 29.99 wish me luck
YouTube Link
For anyone interested I am posting a YouTube link for the Poetic Revolution Case for the Note 8.0
http://www.youtube.com/watch?v=qXhY61uALZI
Uh60m Pilot said:
For anyone interested I am posting a YouTube link for the Poetic Revolution Case for the Note 8.0
http://www.youtube.com/watch?v=qXhY61uALZI
Click to expand...
Click to collapse
fantastic video; shows every aspect of this premium case very clearly
thanks for posting this!:good:
Looking at the pictures and video is there any chance of the kick stand brace scratching the back of the note when it's folded? It appears to me metal. I'm close to ordering but I'm also nervous about the addition weight and thickness, how bad is it?
https://www.amazon.com/gp/aw/d/B078...phone+case&dpPl=1&dpID=51x55EIMEDL&ref=plSrch
Looks pretty sweet, just came across this case on Amazon
Sent from my PH-1 using Tapatalk
I ordered one and hopefully get it by Friday/Saturday. No prime shipping with this purchase unfort.
Would be interested to know if the case blocks the speaker on the phone or it routes the sound toward you. It looks like it could be routing the sound from the speak to the 2 holes at the bottom.
Bigdny said:
I ordered one and hopefully get it by Friday/Saturday. No prime shipping with this purchase unfort.
Click to expand...
Click to collapse
Please let us know how it is. It looks pretty decent, hope it's not that bulky. Thanks
Sent from my PH-1 using Tapatalk
It seem that parts of the case are metal(aluminum?) and I hope this case won't make cell reception even weaker than it already is.
dandan2980 said:
https://www.amazon.com/gp/aw/d/B078...phone+case&dpPl=1&dpID=51x55EIMEDL&ref=plSrch
Looks pretty sweet, just came across this case on Amazon
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
Xela19115 also mentioned the case here a few days ago. Looks like a tank itself.
dandan2980 said:
https://www.amazon.com/gp/aw/d/B078...phone+case&dpPl=1&dpID=51x55EIMEDL&ref=plSrch
Looks pretty sweet, just came across this case on Amazon
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
I may order when someone else serves as the test subject.
I'll stay tuned to see how other folks like it.
I ordered this case and immediately had horrible signal issues. I've e-mailed the seller asking if there's a solution. It's too bad to use as a phone, though wifi was not blocked at all. Normally I have strong LTE in my house but it's unusable with the case on.
Marvel should sue them for stealing Spiderman design (j/k). Only if this case had a belt clip, I'd bite. I want someone to make a case with a clip!
goldentequila said:
Marvel should sue them for stealing Spiderman design (j/k). Only if this case had a belt clip, I'd bite. I want someone to make a case with a clip!
Click to expand...
Click to collapse
They already have some cases with holster and belt clip on Amazon.
Sent from my ONEPLUS 3T using Tapatalk
to each their own... but gawd, that's ugly.
I bought it when it first went up, before their description made it clear it was steel, I was hoping for a thin metal slip. The case is heavy as hell, and the built in screen protector traps pocket lint between the screen protector and screen. The case is held on with 6 hex screws, which worked, but made it even heavier.
It did muffle sound a little, as to radio...I'm just switching to Ting with GSM from Sprint with my phone. I was worried for a bit that my phone was the issue, but a girl who has a galaxy phone has all the same signal issues I did on Sprint. I'll let you know of mine is better, and how GSM is impacted by the case later.
---------- Post added at 09:15 AM ---------- Previous post was at 09:10 AM ----------
I should also mention, like the Tudia, it made my side access worse. I use Lucid launcher specifically for the left side slide out favorite apps, these were really hard to activate on both this case, and the Tudia. I also use a pie fromthe right side, this was similarly hard to trigger, but at least I could customize the trigger width to accommodate the massive bearth.
Here is another new case on Amazon.
https://smile.amazon.com/gp/product/B07C4YVM6V/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
Anyone seen it? Have it?
(Fixed the link)
tech_head said:
Here is another new case on Amazon.
https://smile.amazon.com/Essential-...696&sr=1-1-spons&keywords=essential+ph-1&th=1
Anyone seen it? Have it?
Click to expand...
Click to collapse
The shortcut leads to the phone rather than a case.
jhs39 said:
The shortcut leads to the phone rather than a case.
Click to expand...
Click to collapse
Fixed
https://smile.amazon.com/gp/product/B07C4YVM6V/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
That doesn't look like a quality case to me. The back looks like plastic. But there aren't a lot of cases compatible with the 360 Camera so if you want specifically to use that feature it's probably worth taking the chance since the case is so cheap. But if you don't care about the 360 Camera there are clearly way better choices.
jhs39 said:
That doesn't look like a quality case to me. The back looks like plastic. But there aren't a lot of cases compatible with the 360 Camera so if you want specifically to use that feature it's probably worth taking the chance since the case is so cheap. But if you don't care about the 360 Camera there are clearly way better choices.
Click to expand...
Click to collapse
I bought it.
It actually isn't cheap feeling.
Soft touch.
Pretty heavy.
Secures on the phone pretty well.
Looks like it will protect the phone in a drop.
It does add bulk.
The flip down for the camera is pretty cool.
The opening on the back for the camera is large since the case is so deep.
The fingerprint sensor hole is also large because they made it to clear the camera opening without leaving a small piece of TPU inside.
Overall I like it for the ~$10 I paid.
It is either this or naked.
I bought it as well.
Doesn't feel cheap to me.
Adds a decent amount of bulk to the phone but not too much.
The flip down feels pretty sturdy and hopefully it won't loosen over time.
It has a nice feel to it. Soft but not slick. Sort of rubberized.
I've been using the first Tudia case that came out for this phone for awhile now and it's fine most of the time. But when I do use the 360 lens it is a hassle. Having to peel the case off. Hopefully this fixes that problem.
ryaleon87 said:
I bought it as well.
Doesn't feel cheap to me.
Adds a decent amount of bulk to the phone but not too much.
The flip down feels pretty sturdy and hopefully it won't loosen over time.
It has a nice feel to it. Soft but not slick. Sort of rubberized.
I've been using the first Tudia case that came out for this phone for awhile now and it's fine most of the time. But when I do use the 360 lens it is a hassle. Having to peel the case off. Hopefully this fixes that problem.
Click to expand...
Click to collapse
I tried it yesterday and the flip down works fine.
It's a bit stiff to latch and unlatch, but it does solve the 360 camera issue.
No more case removal! It also means that those screen protectors that glue around the edges will bel see likely to lift.
I still haven't decided if I want to use LOCA to attach a screen protector to my phone.