Related
Hello, I need help on fixing my Samsung Infuse 4G.
I was trying to install a different ROM from my computer onto my phone and when i did. It just got stuck on the samsung logo. Also when i put it in download mode and connect it to my computer it doesn't appear on Odin. Also my computer doesn't regonize my phone it just says unknown device. Can someone help me please? I want my phone to be back to stock so i can reinstall everything else back to normal. Thanks.
I think that u should try searching. This has been answered more times then can be counted.
sent from outer space.
thanks i fixed my problem already.
After countless of weeks trying to figure out what's wrong and how to fix it, I might as well ask help from the masters,
I bought this phone in a non-working condition and was only told it just needed charging.
Here's what I know about it so far:
Z560e
PJ40200
so it's an S3
the phone does not boot up
I cannot get into hboot
the phone shows an amber light when connected to a power source, so I'm assuming it's charging.
sometimes gets detected by the computer as qhsusb_dload but I can't seem to reproduce the condition that it does get detected.
I have taken the phone apart, connected it without the battery to see if qhsusb_dload is detected to no avail
I don't know how it got into this situation and haven't tried any of the methods to fix this as it might worsten the situation.
i have tried to get this checked by a local shop to get it jtagged but he failed and I'm not entirely sure if he put any effort it
I wanna know what's wrong with it and if or how I can fix it?
Any help would be greatly appreciated :highfive:
Is the mode displayed qhusb or qhusb_dload on PC?
it's displayed as qhsusb_dload.
what are the differences exactly? Just so I'd know so I could help out others.
Qhusb is totally bricked and can only be repaired with jtag. Normally qhusb happens by flashing wrong hoot, or recovery etc.
Qhusb_dload can be repaired with PC. Most of the time.
Did you used unlimited.io tool?
Ps I live in Germany, so I won't respond anymore today. Too late here .
wew, well that's a relief. :cyclops:
I haven't yet but I'll try unlimited.io's solution, see if that fixes it.
thanx for your time, it's 5am where I'm from right now and I'll keep working on this till i pass out. :victory:
update: tried unlimited.io's QHSUSB_DLOAD fix but to no avail either, any other suggestions?
No no. Don't try it . Oh damn... Now it's definitely bricked...
I asked if you used it not tried to use it.
Don't wanted you to use it.
hm.. so, what do I do now?
Replied on pm
ok.. so just charge it until Monday?
Yes
@tecardo
my one s s3 too is also bricked like agili, i tried to update to jellybean via OTA and the phone suddenly shutsdown. and now it is bricked. pls help me thanks
Still report back on Monday.
alright, monday is here. what's next?
I would need one of your One S. The reason i had you wait: The battery discharges in this state. If it's empty it's hard to repair.
So someone of you needs to check this: Run a RUU. When Phone is connected.
i ran the ruu, i get an error 170?
so uh, where do i send the phone?
also, would you like me remove the battery so it doesn't discharge on the way there? ill also have it disassembled to save you the trouble
same here tecardo, pls also tell me where i will send my phone im kinda desperate. thanks.
I only need 1 device to look if I can fix it
So here is the problem. I got a friends phone, which for some reason does'nt turn on or charge. The Phone is a HTC PG58100 T-Mobile.
Im using a Apple Mac OSX. I did try to charge the phone, But nothing happened. No Lights Worked, But after an hour or so, the board where the usb is connected gets hot, not very hot though.
1. I tried, booting it with the various key combinations suggested, But nothing happened. The Screen didn't even turn on.
2. Tried the ./brickdetech.sh command on my mac. But this is what I get.
"MacBook-Pro:unbrick lesteroliver$ sudo ./brickdetect.sh
Password:
Searching for bricked device...
sed: 1: "/sd.27 sd.28/{ s/.*\(sd ...": extra characters at the end of q command
Device can't be detected. Check connections
MacBook-Pro:unbrick lesteroliver$
It would be great if anyone could help me out with this issue. thanks.
Please Note: I think the phone must have bricked when someone tried to flash a new rom on to this career locked phone or may be a PIT error, I'm not sure.
Thanks.
lesteroliver said:
So here is the problem. I got a friends phone, which for some reason does'nt turn on or charge. The Phone is a HTC PG58100 T-Mobile.
Im using a Apple Mac OSX. I did try to charge the phone, But nothing happened. No Lights Worked, But after an hour or so, the board where the usb is connected gets hot, not very hot though.
1. I tried, booting it with the various key combinations suggested, But nothing happened. The Screen didn't even turn on.
2. Tried the ./brickdetech.sh command on my mac. But this is what I get.
"MacBook-Pro:unbrick lesteroliver$ sudo ./brickdetect.sh
Password:
Searching for bricked device...
sed: 1: "/sd.27 sd.28/{ s/.*\(sd ...": extra characters at the end of q command
Device can't be detected. Check connections
MacBook-Pro:unbrick lesteroliver$
It would be great if anyone could help me out with this issue. thanks.
Please Note: I think the phone must have bricked when someone tried to flash a new rom on to this career locked phone or may be a PIT error, I'm not sure.
Thanks.
Click to expand...
Click to collapse
if you don't have access to the bootloader and unbricking project fails then only jtag method remains
see this thread too
http://forum.xda-developers.com/showthread.php?t=2775115
@rzr86 - I'm new here, not sure how I can tag you on this reply. Thankyou for the quick reply. I will check out the method and get back to you asap ! Cheers..
Hey guys. I need some help. this is my wrong doing !!
I got a network unlocked T mobile which I started using with AT&T. Today I received the unlock code from T mobile to unlock bootloader which I did. then I I installed TWRP and Magisk without any issues. then I tried to fix the persis.img coz fingerpritn is not working. it didnt work so I left it alone. But I dont know why I wiped cache, data and then phone got stuck at boot loop. (no backup). I tried to install using MSM tool but it didnt work. MSM tool was not detecting the phone. then in TWRP I clicked on EDL and now the phone screen is blank. tried every possible combination of keys but no luck. was doing all this on windows 10. any help would be greatly appreciated. thanks
kool_am said:
Hey guys. I need some help. this is my wrong doing !!
I got a network unlocked T mobile which I started using with AT&T. Today I received the unlock code from T mobile to unlock bootloader which I did. then I I installed TWRP and Magisk without any issues. then I tried to fix the persis.img coz fingerpritn is not working. it didnt work so I left it alone. But I dont know why I wiped cache, data and then phone got stuck at boot loop. (no backup). I tried to install using MSM tool but it didnt work. MSM tool was not detecting the phone. then in TWRP I clicked on EDL and now the phone screen is blank. tried every possible combination of keys but no luck. was doing all this on windows 10. any help would be greatly appreciated. thanks
Click to expand...
Click to collapse
So it turns out its not a hard brick. I'm stuck on TWRP. I'm able to get to fastboot. I tried to install Oxygen OS thru fastboot but the PC is not detecting the phone in fastboot. Mac detects it but I believe all the stock Roms are for PC use. I did try it on my MAc and was able to open a terminal window inside the Oxygen OS folder but then the fastboot device command is not found. any help would be greatly appreciated. I installed SDK and ADB drivers on PC but in device manager the device still only shows as Android device with no drivers. !! thanks
kool_am said:
So it turns out its not a hard brick. I'm stuck on TWRP. I'm able to get to fastboot. I tried to install Oxygen OS thru fastboot but the PC is not detecting the phone in fastboot. Mac detects it but I believe all the stock Roms are for PC use. I did try it on my MAc and was able to open a terminal window inside the Oxygen OS folder but then the fastboot device command is not found. any help would be greatly appreciated. I installed SDK and ADB drivers on PC but in device manager the device still only shows as Android device with no drivers. !! thanks
Click to expand...
Click to collapse
Solved !
solved how? i greatly would like to know how to flash from fastboot, i know that isnt what this thread was about but im having the exact same problems you are with msm. i can see the phone in fastboot but i have no idea how to flash or what to flash from there. I can get into recovery but i cant copy anything over to the phone and the drivers dont show up for adb. so i pretty much ONLY have fastboot and dont know what to do! 2 days since the phone been down and im lost AF
JCroffut said:
solved how? i greatly would like to know how to flash from fastboot, i know that isnt what this thread was about but im having the exact same problems you are with msm. i can see the phone in fastboot but i have no idea how to flash or what to flash from there. I can get into recovery but i cant copy anything over to the phone and the drivers dont show up for adb. so i pretty much ONLY have fastboot and dont know what to do! 2 days since the phone been down and im lost AF
Click to expand...
Click to collapse
Can msm detect the phone when connected in fastboot. Also check device manager in pc to make sure it detects the phone as qualcomm device. Otherwise msm will not work.
Download msm. Turn phone off. Connect phone to pc. Open msm. Press start. Press volume down and power button on phone. It should be detected by msm and should start flashing the software.
Standby....
When plugged in the phone in EDL it shows
QUSB_BULK_CID0412 with an exclamation mark inside a yellow triangle
When i plugged in the phone and open fastboot it shows
Android with an exclamation point inside a yellow triangle
I booted up msm, clicked other, clicked start, pressed volume down and volume up and plugged it in. still says waiting for device to connect. ive also tried this with a number of keys being help, ive tried to boot from twrp straight into edl mode, none of which works
which all says to me its a driver issue of some kind, but for 3 days ive been slaving away on xda and cannot for the life of me figure out where to get the drivers.
JCroffut said:
Standby....
When plugged in the phone in EDL it shows
QUSB_BULK_CID0412 with an exclamation mark inside a yellow triangle
When i plugged in the phone and open fastboot it shows
Android with an exclamation point inside a yellow triangle
I booted up msm, clicked other, clicked start, pressed volume down and volume up and plugged it in. still says waiting for device to connect. ive also tried this with a number of keys being help, ive tried to boot from twrp straight into edl mode, none of which works
which all says to me its a driver issue of some kind, but for 3 days ive been slaving away on xda and cannot for the life of me figure out where to get the drivers.
Click to expand...
Click to collapse
It is a driver issue for sure. When connected device manager should detect as qualcomm hd9008.......
kool_am said:
It is a driver issue for sure. When connected device manager should detect as qualcomm hd9008.......
Click to expand...
Click to collapse
i figured that, i am at a complete loss as to where to find the drivers. i actually might need you to hold my hand on this one a tiny bit because im about to smash the phone on the ground and say someone stole it. thats where i am with this phone haha
JCroffut said:
i figured that, i am at a complete loss as to where to find the drivers. i actually might need you to hold my hand on this one a tiny bit because im about to smash the phone on the ground and say someone stole it. thats where i am with this phone haha
Click to expand...
Click to collapse
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/
kool_am said:
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/
Click to expand...
Click to collapse
standby ill read through it now. we also have 2 different threads going so i can combine them if thats easier for you
kool_am said:
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/
Click to expand...
Click to collapse
Only download the qualcomm driver from this link. Or search for it online.
I have spent much more time than you trying to figure this out. I have a pc and Mac both. Mac is not compatible with a lot of the software and my pc usb ports are all bad. Point being, leave it alone for a day or so. Come back at it with a fresh start and fresh mind.
kool_am said:
Only download the qualcomm driver from this link. Or search for it online.
I have spent much more time than you trying to figure this out. I have a pc and Mac both. Mac is not compatible with a lot of the software and my pc usb ports are all bad. Point being, leave it alone for a day or so. Come back at it with a fresh start and fresh mind.
Click to expand...
Click to collapse
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol
JCroffut said:
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol
Click to expand...
Click to collapse
If I were you, I wouldn't throw the phone away. Like I said it's a simple issue of driver. Install the correct driver and make sure you see it as qualcomm device in device manager. Trust me, from then on, it's just a matter of a few clicks.
I unbricked my phone to t mobile and then converted to global rom without any issues.
kool_am said:
If I were you, I wouldn't throw the phone away. Like I said it's a simple issue of driver. Install the correct driver and make sure you see it as qualcomm device in device manager. Trust me, from then on, it's just a matter of a few clicks.
I unbricked my phone to t mobile and then converted to global rom without any issues.
Click to expand...
Click to collapse
i sent you a private convo on here if thats ok so i dont spam the forum! You may be able to help me out if i could borrow a few minutes of your time!
JCroffut said:
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol
Click to expand...
Click to collapse
i was definatly kidding tho this is my only phone and i have to solve this problem lol
I'm not sure if you have read this thread already. I messed up my phone a couple days ago as well and follow the steps there and was able to MSM my phone back to stock.
[OP8][OOS TMO 55CB] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
I got a OnePlus 9(Chinese global) and trying to root using MacBook. Successfully unlocked bootloader and something went wrong during the flash boot process. Now my phone is in Qualcomm crashdump mode. I have tried everything I could, went to many shops and am hopeless. Therefore, I am offering to pay, my last option. I don't have a windows PC either. I am open to moving within Toronto depending on the distance. Please help, I beg you.
Thanks.
Ask friend or family with a Windows PC to either help or borrow it off them. Then use the MSM tool to restore it.
Ash7o7 said:
I got a OnePlus 9(Chinese global) and trying to root using MacBook. Successfully unlocked bootloader and something went wrong during the flash boot process. Now my phone is in Qualcomm crashdump mode. I have tried everything I could, went to many shops and am hopeless. Therefore, I am offering to pay, my last option. I don't have a windows PC either. I am open to moving within Toronto depending on the distance. Please help, I beg you.
Thanks.
Click to expand...
Click to collapse
You could use a live Windows version with USB drive to boot Windows PC temporarily to gain access to MSM tool, im unsure how you would install the drivers, maybe use an external hard drive to make a complete windows OS that saves files..