I am running Lineage Os 14.1
Android version 7.1.2
Twrp - latest official twrp for ferrari 3.2.1.0
How to flash stock miui rom using twrp? As I always get an error like this - failed to extract system to system etc etc and it stucks at the loading screen in twrp till the phone is discharged totally.. And it got bricked.. I had to restore my lineage os backup again from twrp to use my phone..
I also saw many youtube videos of other xiaomi phones where they flash miui rom easily with twrp.. Whats the problem in mi 4i then?
premx3pj said:
I am running Lineage Os 14.1
Android version 7.1.2
Twrp - latest official twrp for ferrari 3.2.1.0
How to flash stock miui rom using twrp? As I always get an error like this - failed to extract system to system etc etc and it stucks at the loading screen in twrp till the phone is discharged totally.. And it got bricked.. I had to restore my lineage os backup again from twrp to use my phone..
I also saw many youtube videos of other xiaomi phones where they flash miui rom easily with twrp.. Whats the problem in mi 4i then?
Click to expand...
Click to collapse
Use lazy flasher
Lol use lazyflasher
Ultimate Guide for Flashing GENRIC SYSTEM IMAGE.
Contents:
Intro
how to flash gsi.
how to get rooted.
gapps issues
how to get back to non treble rom from gsi or treble enabled builds.
Introduction and basic information:
GSI means Generic System Image, which can be flashed over any Treble Device.
So, in simple words : same System.img can be flashed over multiple devices having Treble Support.
This happens as we now have a separate /vendor partition where all the vendor hals are stored.
Now, this will help to do easy bring ups, Treble builds are smooth af y'all know that and you'll get to flash aosp treble rom
Also, if you own 2-3 treble devices, now you'll just have to download one system.img xD it'll work for all of em ( if treble supported )
How to get Treble Support?
Flashing Treble TWRP won't give you treble support. Keep that in Mind. It'll just mount the partition in the recovery, so that vendor img can be flashed.
To get Treble Support, you'll need to flash a latest ROM which has vendor image compiled with the latest changes by mikeNG, once you flash such a ROM, you'll get the vendor stored in the vendor partition, and after that you can flash any GSI ( as it's just System.img, and all our device specifics are in /vendor so it won't mess with that)
Instructions:
Download Official LineageOS-15.1 treble enabled build from here
Download treble enabled twrp from here
Move both the downloaded files to external sd card (recommended)(optional)
boot in twrp
move to wipe option from twrp.
advanced wipe.
select data and then check if its in ext4 if not format it to ext4 ( do this from official twrp by @celoxocis )
then go to install and install the recovery provided above.
reboot to recovery.
wipe system, data, dalvik, cache & internal storage recommended.
install the lineage os zip and reboot.
download GSI of any rom of your choice. if it is in zipped format extract it and make sure you have a *.img
boot into twrp
wipe anything other than boot, micro sd & vendor
go to install option and then select install image button on bottom right corner
select the gsi of your choice which you have downloaded and install it on system partition.
reboot to recovery (important)
flash mind the gapps if you are going to use gapps in your rom. ( important open gapps have a few issues on treble like many of times gapps dont get flashed or shows some error)
reboot
Kudos you have now flashed a Genric System Image on your Lenovo P2.
for how to get rooted with magisk refer to next post.
and List Of GSI is available here
if you have any doubts even after reading this ultimate guide feel free to post it i will try to answer it and help you with that.
after following instruction as mentioned above
* download the magisk from here
* flash it normally.
A list of GSI and download links can be found here.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Only A arm64 gsi are supported well on our device and based on arch of our device
how to get back to non treble rom?
* Download the non treble rom your choice
* boot into twrp do wipes as suggested on rom's thread and then flash the rom package no need to mess with vendor partition.
I have managed to flash Dirty Unicorns Rom and its working pretty much well.
Here are some screen shots.
Volte working on GSI?
Volte working on any gsi?
advaithbhat said:
Volte working on any gsi?
Click to expand...
Click to collapse
My network provider don't use volte you can try and tell me
Sent from my Phh-Treble vanilla using Tapatalk
I'm on codeexilir's twrp, can't I use that twrp to flash official los 15.1 to get vendor image and then flash any GSI. Or it is mandatory to use los twrp?
abdal2006 said:
I'm on codeexilir's twrp, can't I use that twrp to flash official los 15.1 to get vendor image and then flash any GSI. Or it is mandatory to use los twrp?
Click to expand...
Click to collapse
I believe You can but I haven't tested that.
Sent from my Phh-Treble vanilla using Tapatalk
If i want to change the gsi img then should i clean flash the los 15.1 again?
imPro01 said:
If i want to change the gsi img then should i clean flash the los 15.1 again?
Click to expand...
Click to collapse
No. Just don't wipe vendor & boot just change GSI
Sent from my Phh-Treble vanilla using Tapatalk
abhayruparel said:
No. Just don't wipe vendor & boot just change GSI
Click to expand...
Click to collapse
Thank you for reply
1) If i go to recovery and flash the new GSI img without anything wipe then it'll work?
2) If i want to go back to Los then how to do it?
Thx abhayruparel.
There is not an aosp p beta yet, no?
After flashing GSI NFC is not working
I can't make any gsi work.Always returns password and reset phone screens on reboot.Entering password says password accepted but decryption unsuccessful.Reset phone takes to TWRP but does nothing and reboots to the same password screen.What to do?
rexit1979 said:
I can't make any gsi work.Always returns password and reset phone screens on reboot.Entering password says password accepted but decryption unsuccessful.Reset phone takes to TWRP but does nothing and reboots to the same password screen.What to do?
Click to expand...
Click to collapse
Changing system and data to ext4 will do the trick probably
Miltonbaidya88 said:
Changing system and data to ext4 will do the trick probably
Click to expand...
Click to collapse
Both are already on ext4.
After flashing gsi got decryption unsuccessful error. How to solve that?
something is very wrong......
First if I flash lineage then any other gsi like pixel experience, it gives me decryption unsuccessful error.... I'm not even able to format the storage to remove encryption. I did format the encryption using an older version of twrp as the twrp provided for treble gives an error like ''
Unable to format data. Unble to remove encryption
-Now When I formatted data using earlier twrp and hen flashed the treble one and then flashed lineage. Booted and it still encrypted my phone. So the loop goes on again.
I dont know whats wrong. Treble flashing should be easy... been awake since last night trying to make it ork by using different combinations but no luck.
can anyone help?
Is there any way to enable volte in GSI?
10.3.2.0
https://sourceforge.net/projects/xi..._MIMix2S_V10.3.2.0.PDGCNXM_v10-9.zip/download
https://androidfilehost.com/?fid=6006931924117882402
10.3.1.0
https://sourceforge.net/projects/xi..._MIMix2S_V10.3.1.0.PDGCNXM_v10-9.zip/download
https://androidfilehost.com/?fid=1395089523397934131
10.2.2.0
https://sourceforge.net/projects/xi..._MIMix2S_V10.2.2.0.PDGCNXM_v10-9.zip/download
https://androidfilehost.com/?fid=1395089523397908184
10.2.1.0
https://sourceforge.net/projects/xi..._MIMix2S_V10.2.1.0.PDGCNXM_v10-9.zip/download
https://androidfilehost.com/?fid=11410963190603887317
10.0.7.0
https://sourceforge.net/projects/xi..._MIMix2S_V10.0.7.0.PDGCNFH_v10-9.zip/download
https://androidfilehost.com/?fid=11410963190603845043
New links will be posted here.
10.0.4.0 bootloops for me
Coming from Pixel 3 Experience GSI ROM by EnesSastim. I can fastboot flash the official MIUI 10 Global which works but every time I flash this ROM via TWRP I just get bootloop.
Full wipe doesn't seem to help so I guess I'm sticking on the official Global ROM for now. Any ideas?
10.2.1.0 added in OP.
mike freegan said:
10.0.4.0 bootloops for me
Coming from Pixel 3 Experience GSI ROM by EnesSastim. I can fastboot flash the official MIUI 10 Global which works but every time I flash this ROM via TWRP I just get bootloop.
Full wipe doesn't seem to help so I guess I'm sticking on the official Global ROM for now. Any ideas?
Click to expand...
Click to collapse
Not sure if you ever figured it out but the instructions on EU's site are terrible and not very descriptive.
When they mean when they say "Wipe /Data" is to hit Wipe > Format Data > Type Yes (and swipe to confirm I believe) You will then have to copy over the zip to your phone and flash (That's why the instructions are written that way)
Keep in mind, that this will wipe your internal storage so make a back up. It also takes a long time to boot, longer than clean miui install.
is it possible to flash from one MIUI 10 rom to another? mine is on stock chinese 10 rom now, and can't see any files on the root folder of the phone under recovery. may need to use the rom's flash function.
Hello friends, I hope and can help me, it turns out I have the ROM installed but not let me have permissive the seLinux with the kernel stock, just let me if I put a modified kernel, the problem is that for me none of all the modified kernel gives me the autonomy that gives me and L kernel stock, I want to have the permissive ROM of seLinux with the kernel stock, someone knows how? Thank You for your help
10.2.2.0 added in OP.
Might sound like a silly question, but when the phone was first launched and people applied xiaomi.eu roms, some reported that installing magisk would brick their phones for whatever reason. Is this still the case? I just want to pass my safetynet
10.3.1.0 added in OP.
10.3.1.0 reuploaded: https://xiaomi.eu/community/threads/miui-10-0-10-1-10-2-10-3-stable-release.47170/post-480558
10.3.2.0 added in OP.
10.3.2.0 reuploaded.
Hello,
Right now I am on havoc OS on my tulip. I want to clean flash miui 10 . How can I do that safely using miflash tool? I had heard somewhere that I can only flash back to that exact version from where I flashed custom ROM?
Please help me as I am new to arb and it really confuses me
Download the latest stable build.
http://bigota.d.miui.com/V10.2.2.0....roGlobal_V10.2.2.0.OEKMIXM_5af4a46864_8.1.zip
Then just flash it with TWRP (Pitchblack is recommended) like you would any ROM.
Joomsy said:
Download the latest stable build.
http://bigota.d.miui.com/V10.2.2.0....roGlobal_V10.2.2.0.OEKMIXM_5af4a46864_8.1.zip
Then just flash it with TWRP (Pitchblack is recommended) like you would any ROM.
Click to expand...
Click to collapse
Do i need to re-flash "Universal DM-Verity, ForceEncrypt, Disk Quota Disablers " again when flashing an MIUI ROM with TWRP?
Most of user facing problem with lineage latest build as it's not booting and goes to rescue party. So, here is the tricks to get rid of this problem.
What causing boot problem?
The problem is not with rom. Rom is fine. If you flash only the rom then its booted. The problem is with latest gapps. Plz try to avoid the latest opengapps build for proper boot.
Fix
Download the old version of gapps or download this zip and flash with the latest lineage build and enjoy.
No problem with Magisk 19.3 or 19.4