Can't charge when device is powered off anymore - OnePlus 7 Pro Questions & Answers

I have this weird issue that my 7 Pro isn't charging anymore, when I power it off. It's just stuck at the Warning screen that my bootloader is unlocked. Even if I unplug the cable it will be still stuck on this screen. I have to press power and vol up for 10 seconds in order to make it reboot.
OnePlus 7 Pro with OxygenOS 9.5.11, rooted and with edxposed, but no other module than Snaptools.
Any help? Thanks!

Same Problem here.

Magisk does this.
Phone charges but it does not show how much or when it's done.

Oh wow. Never knew this. Is there no way to get it to work again?

null0seven said:
Magisk does this.
Phone charges but it does not show how much or when it's done.
Click to expand...
Click to collapse
No way to fix it now?

No. It's like that since OnePlus 6...

memocatcher said:
I have this weird issue that my 7 Pro isn't charging anymore, when I power it off. It's just stuck at the Warning screen that my bootloader is unlocked. Even if I unplug the cable it will be still stuck on this screen. I have to press power and vol up for 10 seconds in order to make it reboot.
OnePlus 7 Pro with OxygenOS 9.5.11, rooted and with edxposed, but no other module than Snaptools.
Any help? Thanks!
Click to expand...
Click to collapse
You're not the only one.
Pls report it here :
https://forums.oneplus.com/threads/one-out-of-2-oneplus-7-pro-is-now-dead.1043492/
Verstuurd vanaf mijn SM-G975F met Tapatalk

brownbear said:
You're not the only one.
Pls report it here :
https://forums.oneplus.com/threads/one-out-of-2-oneplus-7-pro-is-now-dead.1043492/
Verstuurd vanaf mijn SM-G975F met Tapatalk
Click to expand...
Click to collapse
So I have Magisk, TWRP and a custom Kernel and my phone will indicate charge state when off.
I'm running 9.5.13, ElelmentalX 1.15, Magisk 19.3 and TWRP.

Related

[Q] Phone won't turn on again, dead!

Hallo,
I was trying to boot into recovery to flash new ROM, and it booted into Android (forgot the press the Vol Btn).
I removed the battery, and re-inserted it again, and the phone is just dead!
No way, no booting, no sings of life anymore!!!
I also tried to boot it to recovery, also no success!
- When I connect it to charger, the battery get hot (I think it is still working, but didn't test it on other phone).
- The phone was just fine, no single sight of broken thing.
- Phone has been always used by me, never dropped or went into water.
Thanks for your help
Thanks for the answer, I will try another one in few days, but I think it still works (just guessing).
FD1999 said:
Do you have another battery?
You could try it, and tell us if it works
Gesendet von meinem LG-P500 mit Tapatalk 2
Click to expand...
Click to collapse

[Q] Hard brick

I just had a bootloop changing dalvik to art. Then it shutdown suddenly and there is no way to turn it on, i can't access to recovery or download mode, and it isn't recognized by the computer. Sorry for my english... Any advice?
I had the Nexus g beta 4 rom, with a clean installation, and it works fine with dalvik
Sure that the Battery is not completely drained?
Try this:
seapoint said:
According to Motorola Mobility, the solution to a fully discharged battery not restarting is to plug it in to charger and press & hold the power button for 18+ seconds, when the battery should resume charging.
Click to expand...
Click to collapse
mokkami said:
Sure that the Battery is not completely drained?
Try this:
Click to expand...
Click to collapse
I'll try when I get home and I'll post the results but I did the same several times, more than 10 seconds but no more than 18...
Sent from my Nexus 5 using Tapatalk
man look here, maybe can help
http://www.modaco.com/topic/367037-fix-recover-from-dead-battery-fix/
kaine666 said:
I just had a bootloop changing dalvik to art. Then it shutdown suddenly and there is no way to turn it on, i can't access to recovery or download mode, and it isn't recognized by the computer. Sorry for my english... Any advice?
I had the Nexus g beta 4 rom, with a clean installation, and it works fine with dalvik
Click to expand...
Click to collapse
Did you do anythigh else than switching to ART? I am asking, because you cannot brick your phone with ART. When you turn the phone on, it first runs the bootloader, the bootloader loads the kernel and only after that is the ROM loaded, which is the step where ART can cause problems.
In short - there is no way ART could have done anything to the bootloader or the kernel and thus it couldn´t have bricked the phone.
knizmi said:
Did you do anythigh else than switching to ART? I am asking, because you cannot brick your phone with ART. When you turn the phone on, it first runs the bootloader, the bootloader loads the kernel and only after that is the ROM loaded, which is the step where ART can cause problems.
In short - there is no way ART could have done anything to the bootloader or the kernel and thus it couldn´t have bricked the phone.
Click to expand...
Click to collapse
The phone get stuck into bootlop a lot of time when I changed to art. After that It shutdown, ¿0% battery? I don´t know but now I cannot turn it on anyway...
The battery can be the problem but, freeze It...? Would it affect to the moisture indicator?
Try pressing 45 secons button power until to device power on, after entry to CWM and restore backup or Stock ROM.
kykemejia said:
Try pressing 45 secons button power until to device power on, after entry to CWM and restore backup or Stock ROM.
Click to expand...
Click to collapse
No response
Sent from my Nexus 5 using Tapatalk
kaine666 said:
No response
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
thank you anyway
225 rpostdig
Loki[ITA] said:
man look here, maybe can help
http://www.modaco.com/topic/367037-fix-recover-from-dead-battery-fix/
Click to expand...
Click to collapse
Freeze the phone worked!!! Thank you sir, you save my phone!

[HELP] Maybe a hardware defect. Phone keeps rebooting, evrything even fastboot

Hello,
I had latest PA, Uber kenel and Multirom installed. Suddenly my phone reboots and keeps to reboot. Only MultiRom is accessible for a greater amount of time. But reboots to, as well as fastboot and recovery does not even start.
Can someone please help me? :/ I would really appreciate an answer.
Return to stock. See if it still happens. First step in troubleshooting potential hardware issues
Sent from my Nexus 5 using Tapatalk
Try to get to bootloader from multirom which i believe is a modified twrp so tap reboot and then bootloader and tell us what it says or if its just a normal bootloader screen
Sent from my Nexus 5 using Tapatalk
May be the power button is stuck?? Try pressing it hard a few times and see if it loosens up??
- Sent from an IceCold Hammerhead!
rootSU said:
Return to stock. See if it still happens. First step in troubleshooting potential hardware issues
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
spinninbsod said:
Try to get to bootloader from multirom which i believe is a modified twrp so tap reboot and then bootloader and tell us what it says or if its just a normal bootloader screen
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
vin4yak said:
May be the power button is stuck?? Try pressing it hard a few times and see if it loosens up??
- Sent from an IceCold Hammerhead!
Click to expand...
Click to collapse
I cant return to stock because it keeps rebooting, so bootloader did not work too.
But @vin4yak was right button was stuck! And everything is back to normal. But thank you all for your quick replies

Custom roms, recovery, magisk

I'd like to generate a thread with tried and tested ROMs, recovery, and root methods like magisk for the Moto G6
I'd especially like to see a working TWRP (official or unofficial), magisk boot img, and any known working custom ROMs
It's all in Guides, News, and Discussions already.
edit: and there's fairly obviously a thread with a working TWRP build in this section. I don't understand what you're asking?
TheDevl said:
It's all in Guides, News, and Discussions already.
edit: and there's fairly obviously a thread with a working TWRP build in this section. I don't understand what you're asking?
Click to expand...
Click to collapse
Do these work on the pie update?
I was want to see any and all available ROMs for this device
clcombs262 said:
Do these work on the pie update?
I was want to see any and all available ROMs for this device
Click to expand...
Click to collapse
Check out the treble-enabled device forums. For a while, this is more or less what you're going to have to pick through.
TheDevl said:
Check out the treble-enabled device forums. For a while, this is more or less what you're going to have to pick through.
Click to expand...
Click to collapse
Thx
About magisk on pie?
clcombs262 said:
Thx
About magisk on pie?
Click to expand...
Click to collapse
To my knowledge it works the same as it does on oreo.
TheDevl said:
To my knowledge it works the same as it does on oreo.
Click to expand...
Click to collapse
'to your knowledge'?
I haven't actually got the update yet, but I just wanted to check to see if I'd need to wait to root until the update, or do it now and Skip the update
Sent from my Moto G6 using XDA Labs
clcombs262 said:
'to your knowledge'?
I haven't actually got the update yet, but I just wanted to check to see if I'd need to wait to root until the update, or do it now and Skip the update
Sent from my Moto G6 using XDA Labs
Click to expand...
Click to collapse
I'm on Brazilian Pie, was on soak Pie and GSI pie and all rooted fine with Magisk 18.1 :good:
Moto g6 fastboot rom
HueyT said:
I'm on Brazilian Pie, was on soak Pie and GSI pie and all rooted fine with Magisk 18.1 :good:
Click to expand...
Click to collapse
i have a hardbricked G6 and i found the two testpoints inside which i connect and reach QDloader modus...now i want to flash it with Milfashtool but i didnt found a fastboot rom!?
mimi77 said:
i have a hardbricked G6 and i found the two testpoints inside which i connect and reach QDloader modus...now i want to flash it with Milfashtool but i didnt found a fastboot rom!?
Click to expand...
Click to collapse
Mine got brickes too..., can u point me where is these testpoints exactly? And what is milfashtool?
72k said:
Mine got brickes too..., can u point me where is these testpoints exactly? And what is milfashtool?
Click to expand...
Click to collapse
How do you mean bricked? Where is the phone hanging? I assume you already had unlocked your bootloader before attempting rooting/magisk?
theseeker2654 said:
How do you mean bricked? Where is the phone hanging? I assume you already had unlocked your bootloader before attempting rooting/magisk?
Click to expand...
Click to collapse
Yes i had bootloader unlocked but it still unrooted and its got bricked before i even try for rooting. First of all let me tell u the chronologies. I had this phone from someone in US as a gift but i cant use it on my country(because of network) so i give it a try by unlock the bootlooder, it was succeeded and one day comes update which is april 2018 patch. After the update my phone was unstable, self reboot and bootloops and i found that the screen is flickering sometimes. Then at one night it suddenly turned off when i was sleeping. I tried all method combination button but no luck, it is caused by a bad battery or firmware fail? Please help me!!!
Note: i only got led blinking if i press power plus plugged in charger, the led blinking faster after +20 sec
One single blink every 5 sec and then blinking goes faster after +20 sec for about 5 blinks and repeat to state one single blink. Seems like battery related but i have already open the backcase to see, if i unplugged its battery then push the buttons combination the led is blinking faster like the final state -sorry for bad english
theseeker2654 said:
How do you mean bricked? Where is the phone hanging? I assume you already had unlocked your bootloader before attempting rooting/magisk?
Click to expand...
Click to collapse
Hello do u have solution for me? I managed to buy new battery because of this problem, please read all my walkthrough and give me and advice
72k said:
Hello do u have solution for me? I managed to buy new battery because of this problem, please read all my walkthrough and give me and advice
Click to expand...
Click to collapse
what have you done? Did the new battery resolve your issue? Do you know how to install it? Have you tried plugging it into power and then pressing and holding vol down and power for 2minutes?
theseeker2654 said:
what have you done? Did the new battery resolve your issue? Do you know how to install it? Have you tried plugging it into power and then pressing and holding vol down and power for 2minutes?
Click to expand...
Click to collapse
I did nothing except my bootloader is unlocked and do an OTA update (april 2018 if i remember) and its suddenly turn off when i was sleep with state of bootloop days before that. I havent buy any batteries yet because i need to know what is the problem. Yes i've done all of power combination for even 5mnts. It strange because the LED show me different if i press power combination button
---------- Post added at 05:07 AM ---------- Previous post was at 04:54 AM ----------
theseeker2654 said:
what have you done? Did the new battery resolve your issue? Do you know how to install it? Have you tried plugging it into power and then pressing and holding vol down and power for 2minutes?
Click to expand...
Click to collapse
For ex : it wont blinking at all if the battery completely empty. Then if i charge for awhile it would blink if i pressed power with vol down (after 20 sec) as i described above. Untill the final state of LED i release power and vol down and immediatly pressed vol up then its LED will keep blinking fast forever as long as the charger is plugged in
My moto g6 also appears to be bricked
I don't want to hijack this thread, but since I'm a new member I can't start a forum thread. Now on to the issue with my g6...
When I plug in my g6 the only thing that happens is a small white led flashes at the top right part of the unit. After about 20 mins or so it stops flashing. Holding down the vol+power buttons to go into recover just cycles the power off and on, with the white led flashing just like before. No recovery screen appears, no android robot; only the blinking white led--the display is otherwise entirely blank & black (meaning not lit at all).
When I connect the g6 to my PC I hear the usual "USB beep" indicating that it's recognized the phone being connected, but it does not show any drive or device either in Device Manager or in Explorer. I'm using Win10, with all the Motorola drivers+software installed.
I rooted the phone some time ago, and the bootloader was unlocked before the phone went dead. The last thing I did with the phone was to flash an Android 9 image from the forum here while the phone was connected to my PC.
https://forum.xda-developers.com/mo...android-aosp-9-0-pie-android-9-0-0r1-t3847354
I had flashed others images with no problems up to that point, even the one linked above. But I re-flashed that image since I wanted to "reset" the image to it's stock point (I had made some settings and added apps I wanted to remove, start clean again). The ONLY thing I did different was that the battery was about 50% so I left the phone charge on one of my PC's USB ports while the image was installing. When I checked the phone the next morning it was dead. Afterwards I let it charge for a week but nothing.
Last but not certainly least, I have also tried two different batteries I ordered from Amazon. No change with either one (blinking white led), despite charging each with the original charger for one week.
Sorry for being so long-winded, but I wanted to give as much detail as possible to see if someone here may have a solution. My guess is that I made an incredibly stupid mistake by letting the phone charge from my PC while flashing/installing the A9 image; I really should have left it on my moto g6 charger.
Cant flash magisk 20.1 or even any other always stuck on bootloop any suggestions
Device.= Moto g6 4gb ram
Rom= stock rom
Bootloader =unlocked
Recovery=TWRP 3.2/3.3
Can't flash no encryption either always show error 1
rohit1363 said:
Cant flash magisk 20.1 or even any other always stuck on bootloop any suggestions
Device.= Moto g6 4gb ram
Rom= stock rom
Bootloader =unlocked
Recovery=TWRP 3.2/3.3
Can't flash no encryption either always show error 1
Click to expand...
Click to collapse
Don't use anything higher than Magisk 19.3, for some reason higher versions bootloop the phone. After you install Magisk 19.3, you can upgrade normally via Magisk Manager
AgentICS said:
Don't use anything higher than Magisk 19.3, for some reason higher versions bootloop the phone. After you install Magisk 19.3, you can upgrade normally via Magisk Manager
Click to expand...
Click to collapse
Yeah that's works fine just taking longer boot time but that's ok i am giving it to my father so i don't need to root or anything .
Anyway thank you for help it really works...

Lockscreen issue after Update 10.3 OS Screen dosent wake Up

Hey guys
After the Update to 10.3 OS i have wake up issues. My screen dosent wake up.
I had the Same issue in the beta. When i try to wake up my Phone i see a flicker on my Screen. My Phone is working but the screen is black... On Android 9 i dont have this issue.
I have try to delet the cach, hard reset, delet root, flash stock Recovery, Fingerprint off, duble tab off but nothing is working. Sometimes i try to wake up my Phone after one Minute and then it work for one time... when the Display is on i can work normally.
Have anyone the self Problem?
Sorry for my bad English i try my best.
Did u try a factory reset?
This means returning the phone to it's stock state
Sent from my ONEPLUS A6003 using Tapatalk
RASTAVIPER said:
Did u try a factory reset?
This means returning the phone to it's stock state
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
Yes i have try this 3 Times...

Categories

Resources